target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (35 commits)
PPC: KVM: Fix BAT put
PPC: e500: Only expose even TLB sizes in initial TLB
ppc/pseries: Reset VPA registration on CPU reset
pseries: Don't test for MSR_PR for hypercalls under KVM
PPC: e500: calculate initrd_base like dt_base
PPC: e500: increase DTC_LOAD_PAD
device tree: simplify dumpdtb code
fdt: move dumpdtb interpretation code to device_tree.c
target-ppc: Remove unused power_mode field from cpu state
pseries: Set hash table size based on RAM size
pseries: Remove unnecessary locking from PAPR hash table hcalls
ppc405_uc: Fix buffer overflow
target-ppc: KVM: Fix some kernel version edge cases for kvmppc_reset_htab()
pseries: Fix semantics of RTAS int-on, int-off and set-xive functions
pseries: Rework implementation of TCE bypass
pseries: Remove never used flags field from spapr vio devices
pseries: Remove XICS irq type enum type
pseries: Remove C bitfields from xics code
pseries: Small cleanup to H_CEDE implementation
pseries: Fix XICS reset
...
A terminal NUL is required by caller's use of strchr.
It's better not to use strncpy at all, since there is no need
to zero out hundreds of trailing bytes for each iteration.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the sregs API, upper and lower 32bit segments of the BAT registers
are swapped when doing a set. Since we need to support old kernels out
there, don't bother to fix it in the kernel, but instead work around
the problem in QEMU by swapping on put.
Signed-off-by: Alexander Graf <agraf@suse.de>
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The ppc specific CPU state contains several variables which track the
VPA, SLB shadow and dispatch trace log. These are structures shared
between OS and hypervisor that are used on the pseries machine to track
various per-CPU quantities.
The address of these structures needs to be registered by the guest on each
boot, however currently this registration is not cleared when we reset the
cpu. This patch corrects this bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
CPUPPCState includes a variable 'power_mode' which is used nowhere. This
patch removes it. This includes saving a dummy zero in its place during
vmsave, to avoid breaking the save format.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The kvmppc_reset_htab() function invokes the KVM_PPC_ALLOCATE_HTAB vm ioctl
to request KVM to allocate and reset a hash page table for the guest - it
returns the size of hash table allocated, or 0 to indicate that qemu needs
to allocate the hash table itself. In practice qemu needs to allocate the
htab for full emulation and with Book3sPR KVM, but the kernel has to
allocate it for Book3sHV KVM (the hash table needs to be physically
contiguous in that case).
Unfortunately, the logic in this function is incorrect for some existing
kernels. Specifically:
* at least some PR KVM versions advertise the relevant capability but
don't actually implement the ioctl(), returning ENOTTY.
* For old kernels which don't have the capability, we currently return 0.
This is correct for PV KVM, where we need to allocate the htab, but not for
HV KVM - kernels of this era always allocate a 16MB hash table per guest.
This patch corrects both of these edge cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds support for then new "reset htab" ioctl which allows qemu
to properly cleanup the MMU hash table when the guest is reset. With
the corresponding kernel support, reset of a guest now works properly.
This also paves the way for indicating a different size hash table
to the kernel and for the kernel to be able to impose limits on
the requested size.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
At least when invoked with high enough 'level' arguments,
kvm_arch_put_registers() is supposed to copy essentially all the cpu state
as encoded in qemu's internal structures into the kvm state. Currently
the ppc version does not do this - it never calls KVM_SET_SREGS, for
example, and therefore never sets the SDR1 and various other important
though rarely changed registers.
Instead, the code paths which need to set these registers need to
explicitly make (conditional) kvm calls which transfer the changes to kvm.
This breaks the usual model of handling state updates in qemu, where code
just changes the internal model and has it flushed out to kvm automatically
at some later point.
This patch fixes this for Book S ppc CPUs by adding a suitable call to
KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register
that is set with that call so far). This lets us remove the hacks to
explicitly set these registers from the kvmppc_set_papr() function.
The problem still exists for Book E CPUs (which use a different version of
the kvm_sregs structure). But fixing that has some complications of its
own so can be left to another day.
Lkewise, there is still some ugly code for setting the PVR through special
calls to SET_SREGS which is left in for now. The PVR needs to be set
especially early because it can affect what other features are available
on the CPU, so I need to do more thinking to see if it can be integrated
into the normal paths or not.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We can finally get rid of the ugly HANDLE_NAN{1,2,3} macros.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use the new softfloat float32_muladd() function to implement the vmaddfp
and vnmsubfp instructions. As a bonus we can get rid of the call to the
HANDLE_NAN3 macro, as the NaN handling is directly done at the softfloat
level.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use the new softfloat float32_min() and float32_max() to implement the
vminfp and vmaxfp instructions. As a bonus we can get rid of the call to
the HANDLE_NAN2 macro, as the NaN handling is directly done at the
softfloat level.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit e024e881bb provided a pickNaN()
function for PowerPC, implementing the correct NaN propagation rules.
Therefore there is no need to test the operands manually, we can rely
on the softfloat code to do that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Altivec instructions are not working anymore in PowerPC emulation,
following commit d15f74fb, which inverted two registers in the call
to helper. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* agraf/ppc-for-upstream: (24 commits)
openpic: Added BRR1 register
pseries: Update SLOF firmware image
pseries dma: DMA window params added to PHB and DT population changed
pseries: Add PCI MSI/MSI-X support
pseries: Add trace event for PCI irqs
pseries: Export find_phb() utility function for PCI code
pseries: added allocator for a block of IRQs
pseries: Separate PCI RTAS setup from common from emulation specific PCI setup
pseries: Rework irq assignment to avoid carrying qemu_irqs around
pseries: Remove extraneous prints
pseries: Update SLOF
PPC: spapr: Remove global variable
PPC: spapr: Rework VGA select logic
xbzrle: fix compilation on ppc32
spapr: Add support for -vga option
Add one new file vga-pci.h and cleanup on all platforms
Revert "PPC: e500: Use new MPIC dt format"
ppc: Fix bug in handling of PAPR hypercall exits
PPC: e500: add generic e500 platform
PPC: e500: split mpc8544ds machine from generic e500 code
...
mingw32 seems to want the declaration to also carry the weak attribute.
Strangely, gcc on Linux absolutely does not want the declaration to be marked
as weak. This may not be the right fix, but it seems to do the trick.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently for powerpc, kvm_arch_handle_exit() always returns 1, meaning
that its caller - kvm_cpu_exec() - will always exit immediately afterwards
to the loop in qemu_kvm_cpu_thread_fn().
There's no need to do this. Once we've handled the hypercall there's no
reason we can't go straight around and KVM_RUN again, which is what ret = 0
will signal. The only exception might be for hypercalls which affect the
state of cpu_can_run(), however the only one that might do this is H_CEDE
and for kvm that is always handled in the kernel, not qemu.
Furtherm setting ret = 0 means that when exit_requested is set from a
hypercall, we will enter KVM_RUN once more with a signal which lets the
the kernel do its internal logic to complete the hypercall with out
actually executing any more guest code. This is important if our hypercall
also triggered a reset, which previously would re-initialize everything
without completing the hypercall. This caused the kernel to get confused
because it thought the guest was still in the middle of a hypercall when
it has actually been reset.
This patch therefore changes to ret = 0, which is both a bugfix and a small
optimization.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The pseries platform already contains an IOMMU implementation, since it is
essential for the platform's paravirtualized VIO devices. This IOMMU
support is currently built into the implementation of the VIO "bus" and
the various VIO devices.
This patch converts this code to make use of the new common IOMMU
infrastructure.
We don't yet handle synchronization of map/unmap callbacks vs. invalidations,
this will require some complex interaction with the kernel and is not a
major concern at this stage.
Cc: Alex Graf <agraf@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a compiler error when QEMU was configured with --enable-debug.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On 64bit capable systems, MAS2 can actually hold a 64bit virtual page
address. So increase the mask for its EPN.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MAS registers on BookE are all 32 bit wide, except for MAS2, which
can hold up to 64 bit on 64 bit capable CPUs. Reflect this in the SPR
setting code, so that the guest can never write invalid values in them.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch moves the debug #ifdef'ed SPR trace generation into its
own function, so we can call it from multiple places.
Signed-off-by: Alexander Graf <agraf@suse.de>
IVPR can either hold 32 or 64 bit addresses, depending on the CPU type. Let
the CPU initialization function pass in its mask itself, so we can easily
extend it.
Signed-off-by: Alexander Graf <agraf@suse.de>
On the e500 series, accessing SPR_EPR magically turns into an access at
that CPU's IACK register on the MPIC. Implement that logic to get kernels
that make use of that feature work.
Signed-off-by: Alexander Graf <agraf@suse.de>
The BookE variant of MSR_SF is MSR_CM. Implement everything it takes in TCG to
support running 64bit code with MSR_CM set.
Signed-off-by: Alexander Graf <agraf@suse.de>
The number of SPRs avaiable in different PowerPC chip is still increasing. Add
definitions for the MAS7_MAS3 SPR and all currently known bits in EPCR.
Signed-off-by: Alexander Graf <agraf@suse.de>
More recent Power server chips (i.e. based on the 64 bit hash MMU)
support more than just the traditional 4k and 16M page sizes. This
can get quite complicated, because which page sizes are supported,
which combinations are supported within an MMU segment and how these
page sizes are encoded both in the SLB entry and the hash PTE can vary
depending on the CPU model (they are not specified by the
architecture). In addition the firmware or hypervisor may not permit
use of certain page sizes, for various reasons. Whether various page
sizes are supported on KVM, for example, depends on whether the PR or
HV variant of KVM is in use, and on the page size of the memory
backing the guest's RAM.
This patch adds information to the CPUState and cpu defs to describe
the supported page sizes and encodings. Since TCG does not yet
support any extended page sizes, we just set this to NULL in the
static CPU definitions, expanding this to the default 4k and 16M page
sizes when we initialize the cpu state. When using KVM, however, we
instead determine available page sizes using the new
KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use
some defaults, with some guesswork which should do the right thing for
existing HV and PR implementations. The fallback might not be correct
for future versions, but that's ok, because they'll have
KVM_PPC_GET_SMMU_INFO.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The size of EPN field in MAS2 depends on page size. This patch adds a
mask to discard invalid bits in EPN field.
Definition of EPN field from e500v2 RM:
EPN Effective page number: Depending on page size, only the bits
associated with a page boundary are valid. Bits that represent offsets
within a page are ignored and should be cleared.
There is a similar (but more complicated) definition in PowerISA V2.06.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Lookup table 'hbrev' is never written to, so add a 'const' qualifier.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0
and rename op_helper.c (which only contains load and store helpers)
to mem_helper.c. Remove AREG0 swapping in
tlb_fill().
Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move more misc helpers from helper.c to misc_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move misc helpers from op_helper.c to misc_helpers.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move decrementer and timebase helpers to a dedicated file.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove useless wrappers. In some cases 'int' parameters are
changed to uint32_t.
Make internal functions static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fix kvm compilation]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move more MMU helpers from helper.c to mmu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[update to current helper.c state]
Signed-off-by: Alexander Graf <agraf@suse.de>
When the code is moved together by the next patch, compiler
detects a possible uninitialized variable use. Avoid the warning
by initializing the variables.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move MMU, TLB, SLB and BAT ops to mmu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[fix unwanted whitespace line in Makefile.target]
Signed-off-by: Alexander Graf <agraf@suse.de>
Move integer and vector ops to int_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move FPU and SPE helpers from op_helper.c to fpu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
