We have already set DISAS_NORETURN in generate_exception,
which makes the exit_tb unreachable.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When V=1, both vsstauts.FS and HS-level sstatus.FS are in effect.
Modifying the floating-point state when V=1 causes both fields to
be set to 3 (Dirty).
However, it's possible that HS-level sstatus.FS is Clean and VS-level
vsstatus.FS is Dirty at the time mark_fs_dirty() is called when V=1.
We can't early return for this case because we still need to set
sstatus.FS to Dirty according to spec.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210921020234.123448-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With everything classified as Zb[abcs] and pre-0.93 draft-B
instructions that are not part of Zb[abcs] removed, we can remove the
remaining support code for RVB.
Note that RVB has been retired for good and misa.B will neither mean
'some' or 'all of' Zb*:
https://lists.riscv.org/g/tech-bitmanip/message/532
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-16-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 1.0.0 version of Zbb does not contain pack/packu/packh. However, a
zext.h instruction is provided (built on pack/packh from pre-0.93
draft-B) is available.
This commit adds zext.h and removes the pack* instructions.
Note that the encodings for zext.h are different between RV32 and
RV64, which is handled through REQUIRE_32BIT.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-15-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 1.0.0 version of Zbb does not contain grev/grevi. Instead, a
rev8 instruction (equivalent to the rev8 pseudo-instruction built on
grevi from pre-0.93 draft-B) is available.
This commit adds the new rev8 instruction and removes grev/grevi.
Note that there is no W-form of this instruction (both a
sign-extending and zero-extending 32-bit version can easily be
synthesized by following rev8 with either a srai or srli instruction
on RV64) and that the opcode encodings for rev8 in RV32 and RV64 are
different.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-14-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With the changes to Zb[abcs], there's some encodings that are
different in RV64 and RV32 (e.g., for rev8 and zext.h). For these,
we'll need a helper macro allowing us to select on RV32, as well.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-13-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 1.0.0 version of Zbb does not contain gorc/gorci. Instead, a
orc.b instruction (equivalent to the orc.b pseudo-instruction built on
gorci from pre-0.93 draft-B) is available, mainly targeting
string-processing workloads.
This commit adds the new orc.b instruction and removed gorc/gorci.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-12-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This reassigns the instructions that are part of Zbb into it, with the
notable exceptions of the instructions (rev8, zext.w and orc.b) that
changed due to gorci, grevi and pack not being part of Zb[abcs].
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-11-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following instructions are part of Zbc:
- clmul
- clmulh
- clmulr
Note that these instructions were already defined in the pre-0.93 and
the 0.93 draft-B proposals, but had not been omitted in the earlier
addition of draft-B to QEmu.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-10-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following instructions are part of Zbs:
- b{set,clr,ext,inv}
- b{set,clr,ext,inv}i
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-9-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zb[abcs] ratification package does not include the proposed
shift-one instructions. There currently is no clear plan to whether
these (or variants of them) will be ratified as Zbo (or a different
extension) or what the timeframe for such a decision could be.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-8-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zbs 1.0.0 (just as the 0.93 draft-B before) does not provide for W-form
instructions for Zbs (single-bit instructions). Remove them.
Note that these instructions had already been removed for the 0.93
version of the draft-B extention and have not been present in the
binutils patches circulating in January 2021.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-7-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following instructions are part of Zba:
- add.uw (RV64 only)
- sh[123]add (RV32 and RV64)
- sh[123]add.uw (RV64-only)
- slli.uw (RV64-only)
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-6-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The bitmanipulation ISA extensions will be ratified as individual
small extension packages instead of a large B-extension. The first
new instructions through the door (these have completed public review)
are Zb[abcs].
This adds new 'x-zba', 'x-zbb', 'x-zbc' and 'x-zbs' properties for
these in target/riscv/cpu.[ch].
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-5-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Assume clzw being executed on a register that is not sign-extended, such
as for the following sequence that uses (1ULL << 63) | 392 as the operand
to clzw:
bseti a2, zero, 63
addi a2, a2, 392
clzw a3, a2
The correct result of clzw would be 23, but the current implementation
returns -32 (as it performs a 64bit clz, which results in 0 leading zero
bits, and then subtracts 32).
Fix this by changing the implementation to:
1. shift the original register up by 32
2. performs a target-length (64bit) clz
3. return 32 if no bits are set
Marking this instruction as 'w-form' (i.e., setting ctx->w) would not
correctly model the behaviour, as the instruction should not perform
a zero-extensions on the input (after all, it is not a .uw instruction)
and the result is always in the range 0..32 (so neither a sign-extension
nor a zero-extension on the result will ever be needed). Consequently,
we do not set ctx->w and mark the instruction as EXT_NONE.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
Message-id: 20210911140016.834071-4-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The refactored gen_clzw() uses ret as its argument, instead of arg1.
Fix it.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210911140016.834071-3-philipp.tomsich@vrull.eu
Fixes: 6090391505 ("target/riscv: Add DisasExtend to gen_unary")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Following the recent changes in translate.c, gen_add_uw() causes
failures on CF3 and SPEC2017 due to the reuse of arg1. Fix these
regressions by introducing a temporary.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210911140016.834071-2-philipp.tomsich@vrull.eu
Fixes: 191d1dafae ("target/riscv: Add DisasExtend to gen_arith*")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While we may have had some thought of allowing system-mode
to return from this hook, we have no guests that require this.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The macro name HCOUNTEREN_CY suggests it is for CSR HCOUNTEREN, but
in fact it applies to M-mode and S-mode CSR too. Rename these macros
to have the COUNTEREN_ prefix.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210915084601.24304-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When virtual registers are swapped, mstatus.SD bit should also be
backed up/restored. Otherwise, mstatus.SD bit will be incorrectly kept
across the world switches.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210914013717.881430-1-frank.chang@sifive.com
[ Changes by AF:
- Convert variable to a uint64_t to fix clang error
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Expose the 12 interrupt pending bits in MIP as GPIO lines.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 069d6162f0bc2f4a4f5a44e73f6442b11c703c53.1630301632.git.alistair.francis@wdc.com
These variables should be target_ulong. If truncated to int,
the bool conditions they indicate will be wrong.
As satp is very important for Linux, this bug almost fails every boot.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124539.222868-1-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210911165434.531552-19-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove gen_get_gpr, as the function becomes unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-25-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Exit early if check_access fails.
Split out do_hlv, do_hsv, do_hlvx subroutines.
Use dest_gpr, get_gpr in the new subroutines.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-24-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-23-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-22-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Always use tcg_gen_deposit_z_tl; the special case for
shamt >= 32 is handled there.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-21-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-20-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduce csrr and csrw helpers, for read-only and write-only insns.
Note that we do not properly implement this in riscv_csrrw, in that
we cannot distinguish true read-only (rs1 == 0) from any other zero
write_mask another source register -- this should still raise an
exception for read-only registers.
Only issue gen_io_start for CF_USE_ICOUNT.
Use ctx->zero for csrrc.
Use get_gpr and dest_gpr.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-19-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We failed to write into *val for these read functions;
replace them with read_zero. Only warn about unsupported
non-zero value when writing a non-zero value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-18-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We distinguish write-only by passing ret_value as NULL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-17-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-16-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Narrow the scope of t0 in trans_jalr.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-15-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These operations can be done in one instruction on some hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-14-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These operations are greatly simplified by ctx->w, which allows
us to fold gen_shiftw into gen_shift. Split gen_shifti into
gen_shift_imm_{fn,tl} like we do for gen_arith_imm_{fn,tl}.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use ctx->w for ctpopw, which is the only one that can
re-use the generic algorithm for the narrow operation.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-12-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvb.c.inc.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvm.c.inc.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Split out gen_mulh and gen_mulhu and use the common helper.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-9-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use ctx->w and the enhanced gen_arith function.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-8-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Most arithmetic does not require extending the inputs.
Exceptions include division, comparison and minmax.
Begin using ctx->w, which allows elimination of gen_addw,
gen_subw, gen_mulw.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-7-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduce get_gpr, dest_gpr, temp_new -- new helpers that do not force
tcg globals into temps, returning a constant 0 for $zero as source and
a new temp for $zero as destination.
Introduce ctx->w for simplifying word operations, such as addw.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-6-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We will require the context to handle RV64 word operations.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Utilize the condition in the movcond more; this allows some of
the setcond that were feeding into movcond to be removed.
Do not write into source1 and source2. Re-name "condN" to "tempN"
and use the temporaries for more than holding conditions.
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-4-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Replace uses of tcg_const_* with the allocate and free close together.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-2-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For U-mode CSRs, read-only check is also needed.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210810014552.4884-1-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
