Instead initialise the device via qdev to allow us to set device properties
directly as required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- prep machine is a fictional machine, so has no specifications. Which
devices can be changed/added/removed without impact? Are interrupts
correctly mapped?
- prep firmware (OHW) has support only for IDE drives (no SCSI).
Booting from IDE has been broken approximatively 3 years ago, and nobody complained.
- OHW is limited on IDE boot to a specific set of OS loaders.
These operating systems are of the 2004 time frame.
- OHW can use -kernel. Linux kernel freezes a long time after PS/2 mouse
detection, and then screen becomes garbage. This was already broken in
QEMU v2.7, 2 years ago, and nobody complained.
On the other side:
- 40p is a real machine, so emulation can be checked against
hardware specifications
- OpenBIOS has support for SCSI block devices, including 40p LSI adapter
- OpenBIOS can start mostly all Linux kernels (including recent ones)
and recent operating system (like NetBSD 7.1.2)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[dwg: Drop prep from boot-serial test to avoid deprecation warnings]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This proposal moves all the related IRQ routines of the sPAPR machine
behind a sPAPR IRQ backend interface 'spapr_irq' to prepare for future
changes. First of which will be to increase the size of the IRQ number
space, then, will follow a new backend for the POWER9 XIVE IRQ controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert the devices in ppc405_uc away from using the old_mmio
MemoryRegion accessors:
* opba's 32-bit and 16-bit accessors were just calling the
8-bit accessors and assembling a big-endian order number,
which we can do by setting the .impl.max_access_size to 1
and the endianness to DEVICE_BIG_ENDIAN, and letting the
core memory code do the assembly
* ppc405_gpio's accessors were all just stubs
* ppc4xx_gpt's 8-bit and 16-bit accessors were treating the
access as invalid, which we can do by setting the
.valid.min_access_size and .valid.max_access_size fields
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch the ref405ep_fpga device away from using the old_mmio
MemoryRegion accessors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The prep machine has some code which is stubs of accessors
for XCSR registers. This has been disabled via #if 0
since commit b6b8bd1819 in 2004, and doesn't have any
actual interesting content. It also uses the deprecated
old_mmio accessor functions. Remove it entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This proposal introduces a new IRQ number space layout using static
numbers for all devices, depending on a device index, and a bitmap
allocator for the MSI IRQ numbers which are negotiated by the guest at
runtime.
As the VIO device model does not have a device index but a "reg"
property, we introduce a formula to compute an IRQ number from a "reg"
value. It should minimize most of the collisions.
The previous layout is kept in pre-3.1 machines raising the
'legacy_irq_allocation' machine class flag.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment the PPC64/pseries guest only supports 4K/64K/16M IOMMU
pages and POWER8 CPU supports the exact same set of page size so
so far things worked fine.
However POWER9 supports different set of sizes - 4K/64K/2M/1G and
the last two - 2M and 1G - are not even allowed in the paravirt interface
(RTAS DDW) so we always end up using 64K IOMMU pages, although we could
back guest's 16MB IOMMU pages with 2MB pages on the host.
This stores the supported host IOMMU page sizes in VFIOContainer and uses
this later when creating a new DMA window. This uses the system page size
(64k normally, 2M/16M/1G if hugepages used) as the upper limit of
the IOMMU pagesize.
This changes the type of @pagesize to uint64_t as this is what
memory_region_iommu_get_min_page_size() returns and clz64() takes.
There should be no behavioral changes on platforms other than pseries.
The guest will keep using the IOMMU page size selected by the PHB pagesize
property as this only changes the underlying hardware TCE table
granularity.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
VMStateDescription vmstate_spapr_cpu_state was added by commit
b94020268e (spapr_cpu_core: migrate per-CPU data) to migrate per-CPU
data with the required vmstate registration and unregistration calls.
However the unregistration is being done only from vcpu creation error path
and not from CPU delete path.
This causes migration to fail with the following error if migration is
attempted after a CPU unplug like this:
Unknown savevm section or instance 'spapr_cpu' 16
Additionally this leaves the source VM unresponsive after migration failure.
Fix this by ensuring the vmstate_unregister happens during CPU removal.
Fixing this becomes easier when vmstate (un)registration calls are moved to
vcpu (un)realize functions which is what this patch does.
Fixes: https://bugs.launchpad.net/qemu/+bug/1785972
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead initialise the device via qdev to allow us to set device properties
directly as required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Valgrind reports that when loading a non-ELF kernel, kernel_top may be used
uninitialised when checking for an initrd.
Since there are no known non-ELF kernels for SPARC64 then we can simply
initialise kernel_top to 0 and then skip the initrd load process if it hasn't
been set by load_elf().
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbeDTaAAoJEDbUwPDPL+RtYVIH/1aSWn27pmeoShyqUeoH1uPu
VoJYzSzR5+lVpprF6qK9Z1BjDFohtEnxm4e0iQ0Zd1L9hSld6n6tI/DNueVrJojc
KCCCCPyjIrzbAFJLuZHvqqOs8ZJYqKoGytlF/D0YSQiHSEovfADxfQVIttCVBQoM
rZhYuE8ndEw/9sLXApD4T3VntWO6jdm8clLuCSOsfkPelLOB64RYXQC+mihipqgW
F18ExBsgXm+/jsh+HBVXtRncW2stOi+Difb5MkbQA9OBMLXWruwUC/pzdZhXX8rs
KTsj6FO5RUVXum5fhlex5qP7m/RxGwCwAYXH7VgTubti2BFfdDCpFQteSDgSCFo=
=artu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcel/tags/rdma-pull-request' into staging
RDMA queue
# gpg: Signature made Sat 18 Aug 2018 16:01:46 BST
# gpg: using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel.apfelbaum@zoho.com>"
# gpg: aka "Marcel Apfelbaum <marcel@redhat.com>"
# gpg: aka "Marcel Apfelbaum <marcel.apfelbaum@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F 31F5 36D4 C0F0 CF2F E46D
* remotes/marcel/tags/rdma-pull-request:
config: split PVRDMA from RDMA
hw/pvrdma: remove not needed include
hw/rdma: Add reference to pci_dev in backend_dev
hw/rdma: Bugfix - Support non-aligned buffers
hw/rdma: Print backend QP number in hex format
hw/rdma: Cosmetic change - move to generic function
hw/pvrdma: Cosmetic change - indent right
hw/rdma: Reorder resource cleanup
hw/rdma: Do not allocate memory for non-dma MR
hw/rdma: Delete useless structure RdmaRmUserMR
hw/pvrdma: Make default pkey 0xFFFF
hw/pvrdma: Clean CQE before use
hw/rdma: Modify debug macros
hw/pvrdma: Bugfix - provide the correct attr_mask to query_qp
hw/rdma: Make distinction between device init and start modes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This option has been deprecated for two releases; remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The PL08x model currently will unconditionally call hw_error()
if the DMA engine is enabled by the guest. This has been
present since the PL080 model was edded in 2006, and is
presumably either unintentional debug code left enabled,
or a guard against untested DMA engine code being used.
Remove the hw_error(), since we now have a guest which
will actually try to use the DMA engine (the self-test
binary for the AN505 MPS2 FPGA image).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
A bug in the handling of the register address decode logic
for the PL08x meant that we were incorrectly treating
accesses to the DMA channel registers (DMACCxSrcAddr,
DMACCxDestaddr, DMACCxLLI, DMACCxControl, DMACCxConfiguration)
as bad offsets. Fix this long-standing bug.
Fixes: https://bugs.launchpad.net/qemu/+bug/1637974
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The PL080/PL081 model is missing a reset function; implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently our PL080/PL081 model uses a combination of the CPU's
address space (via cpu_physical_memory_{read,write}()) and the
system address space for performing DMA accesses.
For the PL081s in the MPS FPGA images, their DMA accesses
must go via Master Security Controllers. Switch the
PL080/PL081 model to take a MemoryRegion property which
defines its downstream for making DMA accesses.
Since the PL08x are only used in two board models, we
make provision of the 'downstream' link mandatory and convert
both users at once, rather than having it be optional with
a default to the system address space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The PL080 and PL081 have three outgoing interrupt lines:
* DMACINTERR signals DMA errors
* DMACINTTC is the DMA count interrupt
* DMACINTR is a combined interrupt, the logical OR of the other two
We currently only implement DMACINTR, because that's all the
realview and versatile boards needed, but the instances of the
PL081 in the MPS2 firmware images use all three interrupt lines.
Implement the missing DMACINTERR and DMACINTTC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Create a new include file for the pl081's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
On real v7M hardware, the NMI line is an externally visible signal
that an SoC or board can toggle to assert an NMI. Expose it in
our QEMU NVIC and armv7m container objects so that a board model
can wire it up if it needs to.
In particular, the MPS2 watchdog is wired to NMI.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The Arm Cortex-M System Design Kit includes a simple watchdog module
based on a 32-bit down-counter. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the m48t59 device away from using old_mmio MemoryRegionOps
accessors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20180802180602.22047-1-peter.maydell@linaro.org
The mmio_interface device was a purely internal artifact
of the implementation of the memory subsystem's request_ptr
APIs. Now that we have removed those APIs, we can remove
the mmio_interface device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-4-peter.maydell@linaro.org
We now support direct execution from MMIO regions in the
core memory subsystem. This means that we don't need to
have device-specific support for it, and we can remove
the request_ptr handling from the Xilinx SPIPS device.
(It was broken anyway due to race conditions, and disabled
by default.)
This device is the only in-tree user of this API.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-2-peter.maydell@linaro.org
Add the ESDHC PRSSTAT_SDSTB bit, using the value of SDHC_CLOCK_INT_STABLE.
Freescale recommends checking this bit when changing clock frequency.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534507843-4251-1-git-send-email-hans-erik.floryd@rt-labs.com
[PMM: fixed indentation]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generate an interrupt if USR2_RDR and UCR4_DREN are both set.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534341354-11956-1-git-send-email-hans-erik.floryd@rt-labs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In scripts/arch-run.bash of kvm-unit-tests, it will check the qemu
output log with:
if [ -z "$(echo "$errors" | grep -vi warning)" ]; then
Thus without the warning prefix, all of the test fail.
Since it is not unrecoverable error in kvm_arm_its_reset for
current implementation, downgrading the report from error to
warn makes sense.
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Message-id: 1531969910-32843-1-git-send-email-jia.he@hxt-semitech.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In some BSD systems RDMA migration is possible while
the pvrdma device can't be used because the mremap system call
is missing.
Reported-by: Rebecca Cran <rebecca@bluestop.org>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180816151637.24553-1-marcel.apfelbaum@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
No need to include linux/types.h, is empty anyway.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180811171534.11917-1-marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
The field backend_dev->dev is not initialized, fix it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180805153518.2983-14-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
RDMA application can provide non-aligned buffers to be registered. In
such case the DMA address passed by driver is pointing to the beginning
of the physical address of the mapped page so we can't distinguish
between two addresses from the same page.
Fix it by keeping the offset of the virtual address in mr->virt.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180805153518.2983-13-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
To be consistent with other prints throughout the code fix places that
print it as decimal number.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180805153518.2983-12-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
To be consistence with allocation do the reverse order in deallocation
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180805153518.2983-9-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
There is no use in the memory allocated for non-dma MR.
Delete the code that allocates it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180805153518.2983-8-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
The structure RdmaRmUserMR has no benefits, remove it an move all its
fields to struct RdmaRmMR.
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180805153518.2983-7-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Next CQE is fetched from CQ ring, clean it before usage as it still
carries old CQE values.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180805153518.2983-5-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Calling rdma_rm_query_qp with attr_mask equals to -1 leads to error
where backend query_qp fails to retrieve the needed QP attributes.
Fix it by providing the attr_mask we got from driver.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180805153518.2983-3-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
There are certain operations that are well considered as part of device
configuration while others are needed only when "start" command is
triggered by the guest driver. An example of device initialization step
is msix_init and example of "device start" stage is the creation of a CQ
completion handler thread.
Driver expects such distinction - implement it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180805153518.2983-2-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
If a vfio assigned device makes use of a physical IOMMU, then memory
ballooning is necessarily inhibited due to the page pinning, lack of
page level granularity at the IOMMU, and sufficient notifiers to both
remove the page on balloon inflation and add it back on deflation.
However, not all devices are backed by a physical IOMMU. In the case
of mediated devices, if a vendor driver is well synchronized with the
guest driver, such that only pages actively used by the guest driver
are pinned by the host mdev vendor driver, then there should be no
overlap between pages available for the balloon driver and pages
actively in use by the device. Under these conditions, ballooning
should be safe.
vfio-ccw devices are always mediated devices and always operate under
the constraints above. Therefore we can consider all vfio-ccw devices
as balloon compatible.
The situation is far from straightforward with vfio-pci. These
devices can be physical devices with physical IOMMU backing or
mediated devices where it is unknown whether a physical IOMMU is in
use or whether the vendor driver is well synchronized to the working
set of the guest driver. The safest approach is therefore to assume
all vfio-pci devices are incompatible with ballooning, but allow user
opt-in should they have further insight into mediated devices.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We use a VFIOContainer to associate an AddressSpace to one or more
VFIOGroups. The VFIOContainer represents the DMA context for that
AdressSpace for those VFIOGroups and is synchronized to changes in
that AddressSpace via a MemoryListener. For IOMMU backed devices,
maintaining the DMA context for a VFIOGroup generally involves
pinning a host virtual address in order to create a stable host
physical address and then mapping a translation from the associated
guest physical address to that host physical address into the IOMMU.
While the above maintains the VFIOContainer synchronized to the QEMU
memory API of the VM, memory ballooning occurs outside of that API.
Inflating the memory balloon (ie. cooperatively capturing pages from
the guest for use by the host) simply uses MADV_DONTNEED to "zap"
pages from QEMU's host virtual address space. The page pinning and
IOMMU mapping above remains in place, negating the host's ability to
reuse the page, but the host virtual to host physical mapping of the
page is invalidated outside of QEMU's memory API.
When the balloon is later deflated, attempting to cooperatively
return pages to the guest, the page is simply freed by the guest
balloon driver, allowing it to be used in the guest and incurring a
page fault when that occurs. The page fault maps a new host physical
page backing the existing host virtual address, meanwhile the
VFIOContainer still maintains the translation to the original host
physical address. At this point the guest vCPU and any assigned
devices will map different host physical addresses to the same guest
physical address. Badness.
The IOMMU typically does not have page level granularity with which
it can track this mapping without also incurring inefficiencies in
using page size mappings throughout. MMU notifiers in the host
kernel also provide indicators for invalidating the mapping on
balloon inflation, not for updating the mapping when the balloon is
deflated. For these reasons we assume a default behavior that the
mapping of each VFIOGroup into the VFIOContainer is incompatible
with memory ballooning and increment the balloon inhibitor to match
the attached VFIOGroups.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Remove KVM specific tests in balloon_page(), instead marking
ballooning as inhibited without KVM_CAP_SYNC_MMU support.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For the older machines (such as Mac and SPARC) the DT nodes representing
bootdevices for disk nodes are irregular for mainly historical reasons.
Since the majority of bootdevice nodes for these machines either do not have a
separate disk node or require different (custom) names then it is much easier
for processing to just disable all suffixes for a particular machine.
Introduce a new ignore_boot_device_suffixes MachineClass property to control
bootdevice suffix generation, defaulting to false in order to preserve
compatibility.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20180810124027.10698-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some SysBusDevices either use sysbus_init_mmio() without
sysbus_mmio_map() or the first MMIO memory region doesn't represent the
bus address, causing a firmware device path with an invalid address to
be generated.
SysBusDeviceClass does provide a virtual explicit_ofw_unit_address()
method that can be used to override this process, but it was originally intended
only as as a fallback option meaning that any existing MMIO memory regions still
take priority whilst determining the firmware device address.
There is currently only one user of explicit_ofw_unit_address() and that
is the PCI expander bridge (PXB) device which has no MMIO/PIO resources
defined. This enables us to allow explicit_ofw_unit_address() to take
priority without affecting backwards compatibility, allowing the address
to be customised as required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180805112850.26063-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that we've got the common sysbus_init_child_obj() function, we do
not need the local init_sysbus_child() anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1534420566-15799-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will be used to construct a memory region beyond the RAM region
to let firmwares scan the address space with load/store to guess how
much RAM the SoC has.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-7-joel@jms.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is required to ensure u-boot SDRAM training completes.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-6-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ast2500 SDRAM training routine busy waits on the 'init cycle busy
state' bit in DDR PHY Control/Status register #1 (MCR60).
This ensures the bit always reads zero, and allows training to
complete with upstream u-boot on the ast2500-evb.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-5-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SDRAM training routine sets the 'Enable cache initial' bit, and then
waits for the 'cache initial sequence' to be done.
Have it always return done, as there is no other side effects that the
model needs to implement. This allows the upstream u-boot training to
proceed on the ast2500-evb board.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-4-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the intended protection of read-only values in the
configuration register. They were being always set to zero by mistake.
The read-only fields depend on the configured memory size of the system,
so they cannot be fixed at compile time. The most straight forward
option was to store them in the state structure.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-3-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current emulation will clear the XCH bit when a burst finishes.
This is not quite correct. According to the i.MX7d referemce manual,
Rev 0.1, §10.1.7.3:
This bit [XCH] is cleared automatically when all data in the TXFIFO
and the shift register has been shifted out.
So XCH should be cleared when the FIFO empties, not on completion of a
burst. The FIFO is 64 x 32 bits = 2048 bits, while the max burst size
is larger at 4096 bits. So it's possible that the burst is not finished
after the TXFIFO empties.
Sending a large block (> 2048 bits) with the Linux driver will use a
burst that is larger than the TXFIFO. After the TXFIFO has emptied XCH
does not become unset, as the burst is not yet finished.
What should happen after the TXFIFO empties is the driver will refill it
and set XCH. The rising edge of XCH will trigger another transfer to
begin. However, since the emulation does not set XCH to 0, there is no
rising edge and the next trasfer never begins.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Message-id: 20180731201056.29257-1-tpiepho@impinj.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds Intel Hexadecimal Object File format support to the
generic loader device. The file format specification is available here:
http://www.piclist.com/techref/fileext/hex/intel.htm
This file format is often used with microcontrollers such as the
micro:bit, Arduino, STM32, etc. Users expect to be able to run .hex
files directly with without first converting them to ELF. Most
micro:bit code is developed in web-based IDEs without direct user access
to binutils so it is important for QEMU to handle this file format
natively.
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180814162739.11814-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Image file loaders may add a series of roms. If an error occurs partway
through loading there is no easy way to drop previously added roms.
This patch adds a transaction mechanism that works like this:
rom_transaction_begin();
...call rom_add_*()...
rom_transaction_end(ok);
If ok is false then roms added in this transaction are dropped.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180814162739.11814-5-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The next patch will need to free a rom. There is already code to do
this in rom_add_file().
Note that rom_add_file() uses:
rom = g_malloc0(sizeof(*rom));
...
if (rom->fw_dir) {
g_free(rom->fw_dir);
g_free(rom->fw_file);
}
The conditional is unnecessary since g_free(NULL) is a no-op.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-4-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ARM CPUs have bitbanded IO, a memory region that allows convenient
bit access via 32-bit memory loads/stores. This eliminates the need for
read-modify-update instruction sequences.
This patch makes this optional feature an ARMv7MState qdev property,
allowing boards to choose whether they want bitbanding or not.
Status of boards:
* iotkit (Cortex M33), no bitband
* mps2 (Cortex M3), bitband
* msf2 (Cortex M3), bitband
* stellaris (Cortex M3), bitband
* stm32f205 (Cortex M3), bitband
As a side-effect of this patch, Peter Maydell noted that the Ethernet
controller on mps2 board is now accessible. Previously they were hidden
by the bitband region (which does not exist on the real board).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-2-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested by booting linux 4.18 (built using imx_v6_v7_defconfig) on the
emulated board.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 3f8eb4300206634dc01e04b12f65b73c0ad2f955.1532984236.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.
hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The IMO, FMO and AMO bits in HCR_EL2 are defined to "behave as
1 for all purposes other than direct reads" if HCR_EL2.TGE
is set and HCR_EL2.E2H is 0, and to "behave as 0 for all
purposes other than direct reads" if HCR_EL2.TGE is set
and HRC_EL2.E2H is 1.
To avoid having to check E2H and TGE everywhere where we test IMO and
FMO, provide accessors arm_hcr_el2_imo(), arm_hcr_el2_fmo()and
arm_hcr_el2_amo(). We don't implement ARMv8.1-VHE yet, so the E2H
case will never be true, but we include the logic to save effort when
we eventually do get to that.
(Note that in several of these callsites the change doesn't
actually make a difference as either the callsite is handling
TGE specially anyway, or the CPU can't get into that situation
with TGE set; we change everywhere for consistency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-5-peter.maydell@linaro.org
Use an int64_t as a return type to restore
the negative check for arm_load_as.
Signed-off-by: Adam Lackorzynski <adam@l4re.org>
Message-id: 20180730173712.GG4987@os.inf.tu-dresden.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for GICv2 virtualization extensions by mapping the necessary
I/O regions and connecting the maintenance IRQ lines.
Declare those additions in the device tree and in the ACPI tables.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-21-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit improve the way the GIC is realized and connected in the
ZynqMP SoC. The security extensions are enabled only if requested in the
machine state. The same goes for the virtualization extensions.
All the GIC to APU CPU(s) IRQ lines are now connected, including FIQ,
vIRQ and vFIQ. The missing CPU to GIC timers IRQ connections are also
added (HYP and SEC timers).
The GIC maintenance IRQs are back-wired to the correct GIC PPIs.
Finally, the MMIO mappings are reworked to take into account the ZynqMP
specifics. The GIC (v)CPU interface is aliased 16 times:
* for the first 0x1000 bytes from 0xf9010000 to 0xf901f000
* for the second 0x1000 bytes from 0xf9020000 to 0xf902f000
Mappings of the virtual interface and virtual CPU interface are mapped
only when virtualization extensions are requested. The
XlnxZynqMPGICRegion struct has been enhanced to be able to catch all
this information.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20180727095421.386-20-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some traces to the ARM GIC to catch register accesses (distributor,
(v)cpu interface and virtual interface), and to take into account
virtualization extensions (print `vcpu` instead of `cpu` when needed).
Also add some virtualization extensions specific traces: LR updating
and maintenance IRQ generation.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-19-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the maintenance interrupt generation that is part of the GICv2
virtualization extensions.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-18-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the gic_update_virt() function to update the vCPU interface states
and raise vIRQ and vFIQ as needed. This commit renames gic_update() to
gic_update_internal() and generalizes it to handle both cases, with a
`virt' parameter to track whether we are updating the CPU or vCPU
interfaces.
The main difference between CPU and vCPU is the way we select the best
IRQ. This part has been split into the gic_get_best_(v)irq functions.
For the virt case, the LRs are iterated to find the best candidate.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-17-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the read and write functions for the virtual interface of the
virtualization extensions in the GICv2.
One mirror region per CPU is also created, which maps to that specific
CPU id. This is required by the GIC architecture specification.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-16-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the read/write functions to handle accesses to the vCPU interface.
Those accesses are forwarded to the real CPU interface, with the CPU id
being converted to the corresponding vCPU id (vCPU id = CPU id +
GIC_NCPU).
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180727095421.386-15-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement virtualization extensions in the gic_cpu_read() and
gic_cpu_write() functions. Those are the last bits missing to fully
support virtualization extensions in the CPU interface path.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-14-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement virtualization extensions in the gic_deactivate_irq() and
gic_complete_irq() functions.
When the guest writes an invalid vIRQ to V_EOIR or V_DIR, since the
GICv2 specification is not entirely clear here, we adopt the behaviour
observed on real hardware:
* When V_CTRL.EOIMode is false (EOI split is disabled):
- In case of an invalid vIRQ write to V_EOIR:
-> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR
triggers a priority drop, and increments V_HCR.EOICount.
-> If V_APR is already cleared, nothing happen
- An invalid vIRQ write to V_DIR is ignored.
* When V_CTRL.EOIMode is true:
- In case of an invalid vIRQ write to V_EOIR:
-> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR
triggers a priority drop.
-> If V_APR is already cleared, nothing happen
- An invalid vIRQ write to V_DIR increments V_HCR.EOICount.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180727095421.386-13-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement virtualization extensions in the gic_acknowledge_irq()
function. This function changes the state of the highest priority IRQ
from pending to active.
When the current CPU is a vCPU, modifying the state of an IRQ modifies
the corresponding LR entry. However if we clear the pending flag before
setting the active one, we lose track of the LR entry as it becomes
invalid. The next call to gic_get_lr_entry() will fail.
To overcome this issue, we call gic_activate_irq() before
gic_clear_pending(). This does not change the general behaviour of
gic_acknowledge_irq.
We also move the SGI case in gic_clear_pending_sgi() to enhance
code readability as the virtualization extensions support adds a if-else
level.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-12-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement virtualization extensions in gic_activate_irq() and
gic_drop_prio() and in gic_get_prio_from_apr_bits() called by
gic_drop_prio().
When the current CPU is a vCPU:
- Use GIC_VIRT_MIN_BPR and GIC_VIRT_NR_APRS instead of their non-virt
counterparts,
- the vCPU APR is stored in the virtual interface, in h_apr.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-11-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some helper functions to gic_internal.h to get or change the state
of an IRQ. When the current CPU is not a vCPU, the call is forwarded to
the GIC distributor. Otherwise, it acts on the list register matching
the IRQ in the current CPU virtual interface.
gic_clear_active can have a side effect on the distributor, even in the
vCPU case, when the correponding LR has the HW field set.
Use those functions in the CPU interface code path to prepare for the
vCPU interface implementation.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-10-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An access to the CPU interface is non-secure if the current GIC instance
implements the security extensions, and the memory access is actually
non-secure. Until then, it was checked with tests such as
if (s->security_extn && !attrs.secure) { ... }
in various places of the CPU interface code.
With the implementation of the virtualization extensions, those tests
must be updated to take into account whether we are in a vCPU interface
or not. This is because the exposed vCPU interface does not implement
security extensions.
This commits replaces all those tests with a call to the
gic_cpu_ns_access() function to check if the current access to the CPU
interface is non-secure. This function takes into account whether the
current CPU is a vCPU or not.
Note that this function is used only in the (v)CPU interface code path.
The distributor code path is left unchanged, as the distributor is not
exposed to vCPUs at all.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-9-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some helper macros and functions related to the virtualization
extensions to gic_internal.h.
The GICH_LR_* macros help extracting specific fields of a list register
value. The only tricky one is the priority field as only the MSB are
stored. The value must be shifted accordingly to obtain the correct
priority value.
gic_is_vcpu() and gic_get_vcpu_real_id() help with (v)CPU id manipulation
to abstract the fact that vCPU id are in the range
[ GIC_NCPU; (GIC_NCPU + num_cpu) [.
gic_lr_* and gic_virq_is_valid() help with the list registers.
gic_get_lr_entry() returns the LR entry for a given (vCPU, irq) pair. It
is meant to be used in contexts where we know for sure that the entry
exists, so we assert that entry is actually found, and the caller can
avoid the NULL check on the returned pointer.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-8-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the register definitions for the virtual interface of the GICv2.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-7-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the necessary parts of the virtualization extensions state to the
GIC state. We choose to increase the size of the CPU interfaces state to
add space for the vCPU interfaces (the GIC_NCPU_VCPU macro). This way,
we'll be able to reuse most of the CPU interface code for the vCPUs.
The only exception is the APR value, which is stored in h_apr in the
virtual interface state for vCPUs. This is due to some complications
with the GIC VMState, for which we don't want to break backward
compatibility. APRs being stored in 2D arrays, increasing the second
dimension would lead to some ugly VMState description. To avoid
that, we keep it in h_apr for vCPUs.
The vCPUs are numbered from GIC_NCPU to (GIC_NCPU * 2) - 1. The
`gic_is_vcpu` function help to determine if a given CPU id correspond to
a physical CPU or a virtual one.
For the in-kernel KVM VGIC, since the exposed VGIC does not implement
the virtualization extensions, we report an error if the corresponding
property is set to true.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-6-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some functions are now only used in arm_gic.c, put them static. Some of
them where only used by the NVIC implementation and are not used
anymore, so remove them.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-4-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement GICD_ISACTIVERn and GICD_ICACTIVERn registers in the GICv2.
Those registers allow to set or clear the active state of an IRQ in the
distributor.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-3-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for the virtualization extensions implementation,
refactor the name of the functions and macros that act on the GIC
distributor to make that fact explicit. It will be useful to
differentiate them from the ones that will act on the virtual
interfaces.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-2-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The differences from ARMv7-M NVIC are:
* ARMv6-M only supports up to 32 external interrupts
(configurable feature already). The ICTR is reserved.
* Active Bit Register is reserved.
* ARMv6-M supports 4 priority levels against 256 in ARMv7-M.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as a HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180718095628.26442-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle SCS reserved registers listed in ARMv6-M ARM D3.6.1.
All reserved registers are RAZ/WI. ARM_FEATURE_M_MAIN is used for the
checks, because these registers are reserved in ARMv8-M Baseline too.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guest writes to vNVDIMM labels are intercepted and performed on the
backend by QEMU. When the backend is a real persistent memort, QEMU
needs to take proper operations to ensure its write persistence on the
persistent memory. Otherwise, a host power failure may result in the
loss of guest label configurations.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
Before that, valgrind points out bad memory write to console
surface. The VGA code is not aware that virtio-gpu got a message
surface scanout when the display is disabled. Let's reset VGA graphic
mode when it is the case, so that a new display surface is created
when doing further VGA operations.
https://bugs.launchpad.net/qemu/+bug/1784900/
Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 20180803153235.4134-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code currently in gicv3_gicd_no_migration_shift_bug_post_load()
that handles migration from older QEMU versions with a particular
bug is misplaced. We need to run this after migration in all cases,
not just the cases where the "arm_gicv3/gicd_no_migration_shift_bug"
subsection is present, so it must go in a post_load hook for the
top level VMSD, not for the subsection. Move it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-6-peter.maydell@linaro.org
Contrary to the the impression given in docs/devel/migration.rst,
the migration code does not run the pre_load hook for a
subsection unless the subsection appears on the wire, and so
this is not a place where you can set the default value for
state for the "subsection not present" case. Instead this needs
to be done in a pre_load hook for whatever is the parent VMSD
of the subsection.
We got this wrong in two of the subsection definitions in
the GICv3 migration structs; fix this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-5-peter.maydell@linaro.org
Commit 6692aac411 accidentally introduced a second initialization
of the .subsections field of vmstate_gicv3_cpu, instead of adding
the new subsection to the existing list. The effect of this was
probably that migration of GICv3 with virtualization enabled was
broken (or alternatively that migration of ICC_SRE_EL1 was broken,
depending on which of the two initializers the compiler used).
Combine the two into a single list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-3-peter.maydell@linaro.org
Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving vmstate_gicv3_gicd_no_migration_shift_bug
a 'needed' function that always returns true.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-2-peter.maydell@linaro.org
Commit 848a1cc1e (hw/acpi-build: build SRAT memory affinity structures for DIMM devices)
broke the first dimm hotplug in following cases:
1: there is no coldplugged dimm in the last numa node
but there is a coldplugged dimm in another node
-m 4096,slots=4,maxmem=32G \
-object memory-backend-ram,id=m0,size=2G \
-device pc-dimm,memdev=m0,node=0 \
-numa node,nodeid=0 \
-numa node,nodeid=1
2: if order of dimms on CLI is:
1st plugged dimm in node1
2nd plugged dimm in node0
-m 4096,slots=4,maxmem=32G \
-object memory-backend-ram,size=2G,id=m0 \
-device pc-dimm,memdev=m0,node=1 \
-object memory-backend-ram,id=m1,size=2G \
-device pc-dimm,memdev=m1,node=0 \
-numa node,nodeid=0 \
-numa node,nodeid=1
(qemu) object_add memory-backend-ram,id=m2,size=1G
(qemu) device_add pc-dimm,memdev=m2,node=0
the first DIMM hotplug to any node except the last one
fails (Windows is unable to online it).
Length reduction of stub hotplug memory SRAT entry,
fixes issue for some reason.
RHBZ: 1609234
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check region type first before casting the memory region
to IOMMUMemoryRegion. Otherwise QEMU will abort with below
error message when casting non-IOMMU memory region:
vhost_iommu_region_add: Object 0x561f28bce4f0 is not an
instance of type qemu:iommu-memory-region
Fixes: cb1efcf462 ("iommu: Add IOMMU index argument to notifier APIs")
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The four interrupts of the PCI bus are connected to the same UIC pin
on the real Sam460ex. Evidence for this can be found in the UBoot
source for the Sam460ex in the Sam460ex.c file where
PCI_INTERRUPT_LINE is written. Change the ppc440_pcix model to behave
more like this.
This fixes the problem that can be observed when adding further PCI
cards that got their interrupt rotated to other interrupts than PCI
INT A. In particular, the bug was observed with an additional OHCI PCI
card or an ES1370 sound device.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Valgrind reports an error when introspecting the macio devices, e.g.:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'macio-newworld'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q ppc64-softmmu/qemu-system-ppc64 -M none,accel=qtest -qmp stdio
[...]
==30768== Invalid read of size 8
==30768== at 0x5BC1EA: qdev_print (qdev-monitor.c:686)
==30768== by 0x5BC1EA: qbus_print (qdev-monitor.c:719)
==30768== by 0x43E458: handle_hmp_command (monitor.c:3446)
[...]
Use the new function sysbus_init_child_obj() to initialize the objects
here, to get the reference counting of the objects right, so that they
are cleaned up correctly when the parent gets removed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We clamp down ram_size to match the sclp increment size. We do
not do the same for maxram_size, which means for large guests
with some sizes (e.g. -m 50000) maxram_size differs from ram_size.
This can break other code (e.g. CMMA migration) which uses maxram_size
to calculate the number of pages and then throws some errors.
Fixes: 82fab5c5b9 ("s390x/sclp: remove memory hotplug support")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org
CC: David Hildenbrand <david@redhat.com>
Message-Id: <1532959766-53343-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In the tz-mpc device we allocate a data block for the LUT,
which we then clear to zero in the device's reset method.
This is conceptually fine, but unfortunately results in a
valgrind complaint about use of uninitialized data on startup:
==30906== Conditional jump or move depends on uninitialised value(s)
==30906== at 0x503609: tz_mpc_translate (tz-mpc.c:439)
==30906== by 0x3F3D90: address_space_translate_iommu (exec.c:511)
==30906== by 0x3F3FF8: flatview_do_translate (exec.c:584)
==30906== by 0x3F4292: flatview_translate (exec.c:644)
==30906== by 0x3F2120: address_space_translate (memory.h:1962)
==30906== by 0x3FB753: address_space_ldl_internal (memory_ldst.inc.c:36)
==30906== by 0x3FB8A6: address_space_ldl (memory_ldst.inc.c:80)
==30906== by 0x619037: ldl_phys (memory_ldst_phys.inc.h:25)
==30906== by 0x61985D: arm_cpu_reset (cpu.c:255)
==30906== by 0x98791B: cpu_reset (cpu.c:249)
==30906== by 0x57FFDB: armv7m_reset (armv7m.c:265)
==30906== by 0x7B1775: qemu_devices_reset (reset.c:69)
This is because of a reset ordering problem -- the TZ MPC
resets after the CPU, but an M-profile CPU's reset function
includes memory loads to get the initial PC and SP, which
then go through an MPC that hasn't yet been reset.
The simplest fix for this is to zero the LUT when we
initialize the data, which will result in the MPC's
translate function giving the right answers for these
early memory accesses.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180724153616.32352-1-peter.maydell@linaro.org
A cut-and-paste error meant we were incorrectly wiring up the timer1
IRQ to IRQ3. IRQ3 is the interrupt for timer0 -- move timer0 to
IRQ4 where it belongs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727113854.20283-3-peter.maydell@linaro.org
The vmstate save/load code insists that subsections of a VMState must
have names which include their parent VMState's name as a leading
substring. Unfortunately it neither documents this nor checks it on
device init or state save, but instead fails state load with a
confusing error message ("Missing section footer for armv7m_nvic").
Fix the name of the m-security subsection of the NVIC, so that
state save/load works correctly for the security-enabled NVIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180727113854.20283-2-peter.maydell@linaro.org
When copy_properties_from_host() ignores the error for an optional
property, it frees the error, but fails to reset it.
Hence if two or more optional properties are missing, an assertion is
triggered:
util/error.c:57: error_setv: Assertion `*errp == NULL' failed.
Fis this by resetting err to NULL after ignoring the error.
Fixes: 9481cf2e5f ("hw/arm/sysbus-fdt: helpers for clock node generation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-id: 20180725113000.11014-1-geert+renesas@glider.be
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'vmstate_smmuv3_queue' is missing the end-of-list marker.
Fixes: 10a83cb988
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180727135406.15132-1-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped stray blank line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix outgoing migration which was crashing in
vmstate_hda_audio_stream_buf_needed, I think the problem
is that we have room for upto 4 streams in the array but only
use 2, when we come to try and save the state of the unused
streams we hit st->state == NULL.
Fixes: 280c1e1cdb
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180724102215.31866-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When we escalate a v8M exception to HardFault, if AIRCR.BFHFNMINNS is
set then we need to decide whether it should become a secure HardFault
or a nonsecure HardFault. We should always escalate to the same
target security state as the original exception. The current code
tries to test this using the 'secure' bool, which is not right because
that flag indicates whether the target security state only for
banked exceptions; the effect was that we were incorrectly escalating
always-secure exceptions like SecureFault to a nonsecure HardFault.
Fix this by defining, logging and using a new 'targets_secure' bool
which tracks the condition we actually want.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180723123457.2038-1-peter.maydell@linaro.org
In icc_dir_write() we were incorrectly checking HCR_EL2.FMO
when determining whether IRQ should be routed to EL2; this should
be HCR_EL2.IMO (compare the GICv3 pseudocode ICC_DIR_EL1[]).
Use the correct mask.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180723180337.17378-1-peter.maydell@linaro.org
The instance_init function of the "exynos4210.gic" device creates a
new "arm_gic" device and immediately realizes it with qdev_init_nofail().
This will leave a lot of object in the QOM tree during introspection of
the "exynos4210.gic" device, e.g. reproducible by starting QEMU like this:
qemu-system-aarch64 -M none -nodefaults -nographic -monitor stdio
And then by running "info qom-tree" at the HMP monitor, followed by
"device_add exynos4210.gic,help" and finally checking "info qom-tree"
again.
Also note that qdev_init_nofail() can exit QEMU in case of errors - and
this must never happen during an instance_init function, otherwise QEMU
could terminate unexpectedly during introspection of a device.
Since most of the code that follows the qdev_init_nofail() depends on
the realized "gicbusdev", the easiest solution to the problem is to
turn the whole instance_init function into a realize function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1532337784-334-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
nand_init() does not only create the NAND device, it also realizes
the device with qdev_init_nofail() already. So we must not call
nand_init() from an instance_init function like sl_nand_init(),
otherwise we get superfluous NAND devices in the QOM tree after
introspecting the 'sl-nand' device. So move the nand_init() to the
realize function of 'sl-nand' instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1532006134-7701-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes in PIO mode have two requirements:
- A data interrupt must be generated after a write command has been
issued to indicate that the chip is ready to receive data.
- A block interrupt must be generated after each block to indicate
that the chip is ready to receive the next data block.
Rearrange the code to make this happen. Tested on raspi3 (in PIO mode)
and raspi2 (in DMA mode).
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1531779837-20557-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only signal MSI/MSI-X events on rising edges. So far we re-triggered the
interrupt sources even if the guest did no consumed the pending one,
easily causing interrupt storms.
Issue was observable with Linux 4.16 e1000e driver when MSI-X was used.
Vector 2 was causing interrupt storms after the driver activated the
device.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The multiboot code parses the initrd_filename twice, first to count how
many entries there are, and second to process each entry. This changes
the first loop to store the parse module names in a list, and the second
loop can now use these names. This avoids having to pass NULL to the
get_opt_value() method which means it can safely assume a non-NULL param.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-3-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The logic for parsing the multiboot initrd modules was messed up in
commit 950c4e6c94
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Apr 16 12:17:43 2018 +0100
opts: don't silently truncate long option values
Causing the length to be undercounter, and the number of modules over
counted. It also passes NULL to get_opt_value() which was not robust
at accepting a NULL value.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-2-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU currently crashes when e.g. doing something like this:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'xlnx,zynqmp'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" \
| aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
Use the new object_initialize_child() and sysbus_init_child_obj()
functions to get the refernce counting of the child objects right, so
that they are properly cleaned up when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-18-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
aux_create_slave() calls qdev_init_nofail() which in turn "realizes"
the corresponding object. This is unlike qdev_create(), and it is wrong
because qdev_init_nofail() must not be called from an instance_init
function. Move qdev_init_nofail() and the subsequent aux_map_slave into
the caller's realize function.
There are two more bugs that needs to be fixed here, too, where the
objects are created but not added as children. Therefore when
you call object_unparent on them, nothing happens.
In particular dpcd and edid give you an infinite loop in bus_unparent,
because device_unparent is not called and does not remove them from
the list of devices on the bus.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-17-git-send-email-thuth@redhat.com
[thuth: Added Paolo's fixup for the dpcd and edid unparenting]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'fsl,imx31'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==26172== Invalid read of size 8
==26172== at 0x6191FA: qdev_print (qdev-monitor.c:686)
==26172== by 0x6191FA: qbus_print (qdev-monitor.c:719)
[...]
Use the new sysbus_init_child_obj() to make sure that the objects are
cleaned up correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-12-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'fsl,imx25'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==26724== Invalid read of size 8
==26724== at 0x6190DA: qdev_print (qdev-monitor.c:686)
==26724== by 0x6190DA: qbus_print (qdev-monitor.c:719)
[...]
Use the new sysbus_init_child_obj() to make sure that the objects are
cleaned up correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-11-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'fsl,imx7'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==27284== Invalid read of size 8
==27284== at 0x618F7A: qdev_print (qdev-monitor.c:686)
==27284== by 0x618F7A: qbus_print (qdev-monitor.c:719)
==27284== by 0x452B38: handle_hmp_command (monitor.c:3446)
[...]
Use the new sysbus_init_child_obj() and object_initialize_child() to make
sure that the objects are removed correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-10-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'fsl,imx6'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==32417== Invalid read of size 8
==32417== at 0x618A7A: qdev_print (qdev-monitor.c:686)
==32417== by 0x618A7A: qbus_print (qdev-monitor.c:719)
==32417== by 0x452B38: handle_hmp_command (monitor.c:3446)
[...]
Use the new sysbus_init_child_obj() and object_initialize_child() to make
sure that the objects are removed correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-9-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running QEMU with valgrind indicates a problem here:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'a9mpcore_priv'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==30996== Invalid read of size 8
==30996== at 0x6185DA: qdev_print (qdev-monitor.c:686)
==30996== by 0x6185DA: qbus_print (qdev-monitor.c:719)
==30996== by 0x452B38: handle_hmp_command (monitor.c:3446)
[...]
Use the new sysbus_init_child_obj() function to make sure that the objects
are cleaned up correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-8-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Valgrind currently reports a problem when running QEMU like this:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'msf2-soc'}}" \
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==23097== Invalid read of size 8
==23097== at 0x6192AA: qdev_print (qdev-monitor.c:686)
==23097== by 0x6192AA: qbus_print (qdev-monitor.c:719)
[...]
Use the new sysbus_init_child_obj() function to make sure that the child
objects are cleaned up correctly when the parent gets destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-7-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a memory management problem when introspecting the a15mpcore_priv
device. It can be seen with valgrind when running QEMU like this:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'a15mpcore_priv'}}"\
"{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 12, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
{"return": [{"name": "num-cpu", "type": "uint32"}, {"name": "num-irq",
"type": "uint32"}, {"name": "a15mp-priv-container[0]", "type":
"child<qemu:memory-region>"}]}
==24978== Invalid read of size 8
==24978== at 0x618EBA: qdev_print (qdev-monitor.c:686)
==24978== by 0x618EBA: qbus_print (qdev-monitor.c:719)
[...]
Use the new sysbus_init_child_obj() function to make sure that we get
the reference counting of the child objects right.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-6-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently crashes when introspecting the "iotkit" device and
runnint "info qtree" afterwards, e.g. when running QEMU like this:
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
"'arguments':{'typename':'iotkit'}}" "{'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
Use the new functions object_initialize_child() and sysbus_init_child_obj()
to make sure that all objects get cleaned up correctly when the instances
are destroyed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-5-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When trying to "device_add bcm2837" on a machine that is not suitable for
this device, you can quickly crash QEMU afterwards, e.g. with "info qtree":
echo "{'execute':'qmp_capabilities'} {'execute':'device_add', " \
"'arguments':{'driver':'bcm2837'}} {'execute': 'human-monitor-command', " \
"'arguments': {'command-line': 'info qtree'}}" | \
aarch64-softmmu/qemu-system-aarch64 -M integratorcp,accel=qtest -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 12, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
{"error": {"class": "GenericError", "desc": "Device 'bcm2837' can not be
hotplugged on this machine"}}
Segmentation fault (core dumped)
The qdev_set_parent_bus() from instance_init adds a link to the child devices
which is not valid anymore after the bcm2837 instance has been destroyed.
Unfortunately, the child devices do not get destroyed / unlinked correctly
because both object_initialize() and object_property_add_child() increase
the reference count of the child objects by one, but only one reference
is dropped when the parent gets removed. So let's use the new functions
object_initialize_child() and sysbus_init_child_obj() instead to create
the objects, which will take care of creating the child objects with the
correct reference count of one.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-4-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of functions are initializing an object and attach it immediately
afterwards to the system bus. Provide a common function for this, which
also uses object_initialize_child() to make sure that the reference
counter is correctly initialized to 1 afterwards.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-3-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RX and TX interrupt bits were reversed, resulting in an endless sequence
of serial interupts in the emulated system and the following repeated
error message when booting Linux.
serial8250: too much work for irq61
This results in a boot failure most of the time.
Qemu command line used to reproduce the problem:
qemu-system-aarch64 -M raspi3 -m 1024 \
-kernel arch/arm64/boot/Image \
--append "rdinit=/sbin/init console=ttyS1,115200"
-initrd rootfs.cpio \
-dtb arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtb \
-nographic -monitor null -serial null -serial stdio
This is with arm64:defconfig. The root file system was generated using
buildroot.
NB that this error likely arises from an erratum in the
BCM2835 datasheet where the TX and RX bits were swapped
in the AU_MU_IER_REG description (but correct for IIR):
https://elinux.org/BCM2835_datasheet_errata#p12
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1529355846-25102-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added NB about datasheet]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These devices are currently causing some problems when a user is trying
to hot-plug or introspect them during runtime. Since these devices can
not be instantiated by the user at all (they need to be wired up in code
instead), we should mark them with user_creatable = false anyway, then we
avoid at least the crashes with the hot-plugging. The introspection problem
will be handled by a separate patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531415537-26037-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICD_ITARGETSR implementation still has some 11MPCore behaviour
that we were incorrectly using in our GICv1 and GICv2 implementations
for the case where the interrupt number is less than GIC_INTERNAL.
The desired behaviour here is:
* for 11MPCore: RAZ/WI for irqs 0..28; read a number matching the
CPU doing the read for irqs 29..31
* for GICv1 and v2: RAZ/WI if uniprocessor; otherwise read a
number matching the CPU doing the read for all irqs < 32
Stop squashing GICD_ITARGETSR to 0 for IRQs 0..28 unless this
is an 11MPCore GIC.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180712154152.32183-3-peter.maydell@linaro.org
In gic_deactivate_irq() the interrupt number comes from the guest
(on a write to the GICC_DIR register), so we need to sanity check
that it isn't out of range before we use it as an array index.
Handle this in a similar manner to the check we do in
gic_complete_irq() for the GICC_EOI register.
The array overrun is not disastrous because the calling code
uses (value & 0x3ff) to extract the interrupt field, so the
only out-of-range values possible are 1020..1023, which allow
overrunning only from irq_state[] into the following
irq_target[] array which the guest can already manipulate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180712154152.32183-2-peter.maydell@linaro.org
The AST2500 SoC family changes the runtime behaviour of the hardware
strapping register (SCU70) to write-1-set/write-1-clear, with
write-1-clear implemented on the "read-only" SoC revision register
(SCU7C). For the the AST2400, the hardware strapping is
runtime-configured with read-modify-write semantics.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20180709143524.17480-1-andrew@aj.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a race condition during hotplug when iothread is used. It
occurs because virtio-scsi may be processing command queues in the
iothread while the monitor performs SCSI device hotplug.
When a SCSI device is hotplugged the HotplugHandler->plug() callback is
invoked and virtio-scsi emits a rescan event to the guest.
If the guest submits a SCSI command at this point then it may be
cancelled before hotplug completes. This happens because ->reset() is
called by hw/core/qdev.c:device_set_realized() after
HotplugHandler->plug() has been called and
hw/scsi/scsi-disk.c:scsi_disk_reset() purges all requests.
This patch uses the new HotplugHandler->post_plug() callback to emit the
rescan event after ->reset(). This eliminates the race conditions where
requests could be cancelled.
Reported-by: l00284672 <lizhengui@huawei.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180716083732.3347-3-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ->pre_plug() callback is invoked before the device is realized. The
->plug() callback is invoked when the device is being realized but
before it is reset.
This patch adds a ->post_plug() callback which is invoked after the
device has been reset. This callback is needed by HotplugHandlers that
need to wait until after ->reset().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180716083732.3347-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes several problems I found in the UART serial implementation.
Now all divisor values are allowed, while before divisor values of zero
and below the base baud rate were rejected. All changes are in reference
to http://www.sci.muni.cz/docs/pc/serport.txt
Signed-off-by: Calvin Lee <cyrus296@gmail.com>
Message-Id: <20180512000545.966-2-cyrus296@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V identifies vCPUs by Virtual Processor (VP) index which can be
queried by the guest via HV_X64_MSR_VP_INDEX msr. It is defined by the
spec as a sequential number which can't exceed the maximum number of
vCPUs per VM.
It has to be owned by QEMU in order to preserve it across migration.
However, the initial implementation in KVM didn't allow to set this
msr, and KVM used its own notion of VP index. Fortunately, the way
vCPUs are created in QEMU/KVM makes it likely that the KVM value is
equal to QEMU cpu_index.
So choose cpu_index as the value for vp_index, and push that to KVM on
kernels that support setting the msr. On older ones that don't, query
the kernel value and assert that it's in sync with QEMU.
Besides, since handling errors from vCPU init at hotplug time is
impossible, disable vCPU hotplug.
This patch also introduces accessor functions to encapsulate the mapping
between a vCPU and its vp_index.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180702134156.13404-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In Hyper-V-related code, vCPUs are identified by their VP (virtual
processor) index. Since it's customary for "vcpu_id" in QEMU to mean
APIC id, rename the respective variables to "vp_index" to make the
distinction clear.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180702134156.13404-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity warned that the false arm of conditional expression is
unreachable when it is inside an if with the same condition.
Remove the unreachable code to avoid the warning.
Fixes: CID 1394215
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 51b0d834c changed error handling to report file name in error
message but forgot to move freeing it after usage. Noticed by Coverity.
Fixes: CID 1394217
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Interrupt conditions occurring while masked are not being
signaled when later unmasked.
The fix is to raise/lower IRQs when IMASK is changed.
To avoid problems like this in future, consolidate
IRQ pin update logic in one function.
Also fix probable typo "IEVENT_TXF | IEVENT_TXF",
and update IRQ pins on reset.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Recent cleanup in commit a028dd423e dropped the ICPStateClass::reset
handler. It is now up to child ICP classes to call the DeviceClass::reset
handler of the parent class, thanks to device_class_set_parent_reset().
This is a better object programming pattern, but unfortunately it causes
QEMU to crash during CPU hotplug:
(qemu) device_add host-spapr-cpu-core,id=core1,core-id=1
Segmentation fault (core dumped)
When the hotplug path tries to reset the ICP device, we end up calling:
static void icp_kvm_reset(DeviceState *dev)
{
ICPStateClass *icpc = ICP_GET_CLASS(dev);
icpc->parent_reset(dev);
but icpc->parent_reset is NULL... This happens because icp_kvm_class_init()
calls:
device_class_set_parent_reset(dc, icp_kvm_reset,
&icpc->parent_reset);
but dc->reset, ie, DeviceClass::reset for the TYPE_ICP type, is
itself NULL.
This patch hence sets DeviceClass::reset for the TYPE_ICP type to
point to icp_reset(). It then registers a reset handler that calls
DeviceClass::reset. If the ICP subtype has configured its own reset
handler with device_class_set_parent_reset(), this ensures it will
be called first and it can then call ICPStateClass::parent_reset
safely. This fixes the reset path for the TYPE_KVM_ICP type, which
is the only subtype that defines its own reset function.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: a028dd423e
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function was introduced between v2.11 and v2.12 to replace obsolete
ways of specifying the NUMA nodes for DIMMs. It's used to find the correct
node for an LMB, by locating which DIMM object it lies within.
Unfortunately, one of the checks is inverted, so we check whether the
address is less than two different things, rather than actually checking
a range. This introduced a regression, meaning that after a reboot qemu
will advertise incorrect node information for memory to the guest.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
When the guest changes the address of the frame buffer we need to
refresh the screen to correctly display the new content. This fixes
display update problems when changing between screens on AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current BDC VPD page (page 0xb1) is too short. This can be
seen running sg_utils:
$ sg_vpd --page=bdc /dev/sda
Block device characteristics VPD page (SBC):
Block device characteristics VPD page length too short=8
By the SCSI spec, the expected size of the SBC page is 0x40.
There is no telling how the guest will behave with a shorter
message - it can ignore it, or worse, make (wrong)
assumptions.
This patch fixes the emulation by setting the size to 0x40.
This is the output of the previous sg_vpd command after
applying it:
$ sg_vpd --page=bdc /dev/sda -v
inquiry cdb: 12 01 b1 00 fc 00
Block device characteristics VPD page (SBC):
[PQual=0 Peripheral device type: disk]
Medium rotation rate is not reported
Product type: Not specified
WABEREQ=0
WACEREQ=0
Nominal form factor not reported
FUAB=0
VBULS=0
To improve readability, this patch also adds the VBULS value
explictly and add comments on the existing fields we're
setting.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
PCI devices needing a ROM allocate an optional MemoryRegion with
pci_add_option_rom(). pci_del_option_rom() does the cleanup when the
device is destroyed. The only action taken by this routine is to call
vmstate_unregister_ram() which clears the id string of the optional
ROM RAMBlock and now, also flags the RAMBlock as non-migratable. This
was recently added by commit b895de5027 ("migration: discard
non-migratable RAMBlocks"), .
VFIO devices do their own loading of the PCI option ROM in
vfio_pci_size_rom(). The memory region is switched to an I/O region
and the PCI attribute 'has_rom' is set but the RAMBlock of the ROM
region is not allocated. When the associated PCI device is deleted,
pci_del_option_rom() calls vmstate_unregister_ram() which tries to
flag a NULL RAMBlock, leading to a SEGV.
It seems that 'has_rom' was set to have memory_region_destroy()
called, but since commit 469b046ead ("memory: remove
memory_region_destroy") this is not necessary anymore as the
MemoryRegion is freed automagically.
Remove the PCIDevice 'has_rom' attribute setting in vfio.
Fixes: b895de5027 ("migration: discard non-migratable RAMBlocks")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The macro CMMA_BLOCK_SIZE was defined but not used, and a hardcoded
value was instead used in the code.
This patch fixes the value of CMMA_BLOCK_SIZE and uses it in the
appropriate place in the code, and fixes another case of hardcoded
value in the KVM backend, replacing it with the more appropriate
constant KVM_S390_CMMA_SIZE_MAX.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1530787170-3101-1-git-send-email-imbrenda@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This reverts commit a7aff6dd10.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit b008326744.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 7a3099fc9c5c("numa: postpone options post-processing till machine_run_board_init()")
broke the commit 7b8be49d36fc("NUMA: Enable adding NUMA node implicitly").
The machine_run_board_init() doesn't do NUMA setup if nb_numa_nodes=0,
but the numa_complete_configuration need add a new node if memory hotplug
is enabled (slots > 0) even nb_numa_nodes=0.
So, Remove the check for numa_complete_configuration() to fix this.
Fixes 7a3099fc9c5c("numa: postpone options post-processing till machine_run_board_init()")
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Message-Id: <20180704132239.6506-1-douly.fnst@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Machines might have inititalized device_memory if they support memory
devices, so let's properly free it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180702094152.7882-1-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently we use memory_region_init_rom_nomigrate() to create
the "dp3893x-prom" memory region, and we don't manually register
it with vmstate_register_ram(). This currently means that its
contents are migrated but as a ram block whose name is the empty
string; in future it may mean they are not migrated at all. Use
memory_region_init_ram() instead.
Note that this is a a cross-version migration compatibility break
for the MIPS "magnum" and "pica61" machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.markovic@wavecomp.com>
Message-id: 20180706174309.27110-1-peter.maydell@linaro.org
DeviceClass::reset models a "cold power-on" reset which can
also be used to powercycle a device; but there is no "hot reset"
(a.k.a. soft-reset) method available.
The OMAP MMC Power-Up Control bit is not designed to powercycle
a card, but to disable it without powering it off (pseudo-reset):
Multimedia Card (MMC/SD/SDIO) Interface [SPRU765A]
MMC_CON[11] Power-Up Control (POW)
This bit must be set to 1 before any valid transaction to either
MMC/SD or SPI memory cards.
When 1, the card is considered powered-up and the controller core
is enabled.
When 0, the card is considered powered-down (system dependent),
and the controller core logic is in pseudo-reset state. This is,
the MMC_STAT flags and the FIFO pointers are reset, any access to
MMC_DATA[DATA] has no effect, a write into the MMC.CMD register
is ignored, and a setting of MMC_SPI[STR] to 1 is ignored.
By splitting the 'pseudo-reset' code out of the 'power-on' reset
function, this patch fixes a latent bug in omap_mmc_write(MMC_CON)i
recently exposed by ecd219f7ab.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180706162155.8432-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the CMSDK APB timer is set up with a zero RELOAD value
then it will count down to zero, fire once and then stay
at zero. From the point of view of the ptimer system, the
timer is disabled; but the enable bit in the CTRL register
is still set and if the guest subsequently writes to the
RELOAD or VALUE registers this should cause the timer to
start counting down again.
Add code to the write paths for RELOAD and VALUE so that
we correctly restart the timer in this situation.
Conversely, if the new RELOAD and VALUE are both zero,
we should stop the ptimer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20180703171044.9503-5-peter.maydell@linaro.org
The CMSDK APB timer is currently always configured as periodic timer.
This results in the following messages when trying to boot Linux.
Timer with delta zero, disabling
If the timer limit set with the RELOAD command is 0, the timer
needs to be enabled as one-shot timer.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CMSDK timer interrupt triggers when the counter goes from 1 to 0,
so we want to trigger immediately, rather than waiting for a
clock cycle. Drop the incorrect NO_IMMEDIATE_TRIGGER setting.
We also do not want to get an interrupt if the guest sets the
counter directly to zero, so use the new TRIGGER_ONLY_ON_DECREMENT
policy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20180703171044.9503-3-peter.maydell@linaro.org
The CMSDK timer behaviour is that an interrupt is triggered when the
counter counts down from 1 to 0; however one is not triggered if the
counter is manually set to 0 by a guest write to the counter register.
Currently ptimer can't handle this; add a policy option to allow
a ptimer user to request this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20180703171044.9503-2-peter.maydell@linaro.org
smmu_iommu_mr() aims at returning the IOMMUMemoryRegion corresponding
to a given sid. The function extracts both the PCIe bus number and
the devfn to return this data. Current computation of devfn is wrong
as it only returns the PCIe function instead of slot | function.
Fixes 32cfd7f39e ("hw/arm/smmuv3: Cache/invalidate config data")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1530775623-32399-1-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sam460ex_load_device_tree() handles nearly all possible errors by simply
exiting (within helper functions and macros). It handles two early error
cases by returning an error.
There's no particular point to this, so make it handle those directly as
well, removing the need for the caller to handle a failure. As a bonus it
gives us more specific error messages.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The qemu_fdt_*() helper functions already exit with a message instead of
returning errors, so we don't need to check for errors in the caller.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a couple of places sam460ex_load_device_tree() calls "raw" libfdt
functions which can fail, but doesn't check for error codes. At best,
if these fail the guest will be silently started in a non-standard state,
or it could fail entirely.
Fix this by using the _FDT() helper macro which aborts on a libfdt failure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 29f9cef "ppc: Include vga cirrus card into the compiling process"
changed the default display adapter for all PPC machines to cirrus. Unfortunately
it missed setting the default display type to stdvga for both PReP machines
causing the display to fail to initialise under OpenHackWare.
Update the MachineClass for both prep and 40p machines so that the default
std(vga) display adapter is the default if no options are specified
which fixes the display for the PReP machines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Set the changed memory region dirty after performed a 2D operation to
ensure that the screen is updated properly.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Display updates and drawing hardware cursor did not work when frame
buffer address was non-zero. Fix this by taking the frame buffer
address into account in these cases. This fixes screen dragging on
AmigaOS. Based on patch by Sebastian Bauer.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sm501 currently implements only a very limited set of raster operation
modes. After this change, unknown raster operation modes are logged so
these can be easily spotted.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for the negated destination operation mode. This is used e.g.
by AmigaOS for the INVERSEVID drawing mode. With this change, the cursor
in the shell and non-immediate window adjustment are working now.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Before, crt_h_total was used for src_width and dst_width. This is a
property of the current display setting and not relevant for the 2D
operation that also can be done off-screen. The pitch register's purpose
is to describe line pitch relevant of the 2D operation.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Changing the palette of a color index has as an immediate effect on
all pixels with the corresponding index on real hardware. Performing a
full update after a palette change is a simple way to emulate this
effect.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Emulate the i2c part of SM501 which is used to access the EDID info
from a monitor.
The vmstate structure is changed and its version is increased but
SM501 is only used on SH and PPC sam460ex machines that don't support
cross-version migration.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit efe2add7cb ("spapr/vio: deprecate the "irq" property")
introduced get/set accessors for the "irq" property to warn of its
usage, but the warning in the get pollutes the monitor 'info qtree'.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 29f9cef39e "ppc: Include vga cirrus card into the compiling process"
changed the default display adapter for all PPC machines to cirrus. Unfortunately
it missed setting the default display type to stdvga for both Mac machines
causing the display to fail to initialise under OpenBIOS.
Update the MachineClass for both Old World and New World Macs so that the
default std(vga) display adapter is the default if no options are specified
which fixes the display for the Mac machines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The vector cannot be negative. Coverity now reports this because it sees an
array access before the check, in ioapic_stat_update_irq.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Connect the Cadence GEM ethernet device. This also requires us to
expose the plic interrupt lines.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Set the interrupt-controller ndev to the correct number taken from the
HiFive Unleashed board.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
To allow Linux to ennumerate devices on the /soc/ node set it as a
"simple-bus".
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Instead of creating the interrupt in lines with qemu_allocate_irq() use
qdev_init_gpio_in() as this gives us the ability to use the qdev*gpio*()
helpers later on.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine.
We leave the SoC, RAM, device tree and reset/fdt loading as part of the
machine. All the other device creation has been moved to the SoC.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
-----BEGIN PGP SIGNATURE-----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=AHrx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' into staging
ppc patch queue 2018-07-03
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
# gpg: Signature made Tue 03 Jul 2018 06:55:22 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits)
ppc: Include vga cirrus card into the compiling process
target/ppc: Relax reserved bitmask of indexed store instructions
target/ppc: set is_jmp on ppc_tr_breakpoint_check
spapr: compute default value of "hpt-max-page-size" later
target/ppc/kvm: don't pass cpu to kvm_get_smmu_info()
target/ppc/kvm: get rid of kvm_get_fallback_smmu_info()
ppc440_uc: Basic emulation of PPC440 DMA controller
sam460ex: Add RTC device
hw/timer: Add basic M41T80 emulation
ppc4xx_i2c: Rewrite to model hardware more closely
hw/ppc: Give sam46ex its own config option
fpu_helper.c: fix setting FPSCR[FI] bit
target/ppc: Implement the rest of gen_st_atomic
target/ppc: Implement the rest of gen_ld_atomic
target/ppc: Use atomic min/max helpers
target/ppc: Use MO_ALIGN for EXIWX and ECOWX
target/ppc: Split out gen_st_atomic
target/ppc: Split out gen_ld_atomic
target/ppc: Split out gen_load_locked
target/ppc: Tidy gen_conditional_store
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/ppc/spapr.c
Move global_vmstate from vga_common_init() parameter to VGACommonState
field. Set global_vmstate to true for isa vga devices, so nothing
changes here. virtio-vga and secondary-vga already set global_vmstate
to false so no change here either. All other pci vga devices get a new
global-vmstate property, defaulting to false. A compat property flips
it to true for older machine types.
With this in place you don't get a vmstate section naming conflict any
more when adding multiple pci vga devices to your vm.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180702163345.17892-1-kraxel@redhat.com>
When switching scanout from one resource to another we must update the
scanout_bitmask field for both new (set bit) and old (clear bit)
resource.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-3-kraxel@redhat.com
A couple of fixes to amd iommu, and a fix to virtio iommu.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbND4FAAoJECgfDbjSjVRpPfMH/20ND3U1FM65HtH0DNg62ABl
qGcgyQvwSTBG74IEBoDAvZPXJ7s2OPDSdcKGoHgGMGLWYU/Xno6GR6G8dKW0U9Jk
/FOfhGEITFBCBsvzXM40+HqHhL2iNkw2PGt3aJqtx8BHJEnPzBmCKEIl6NmYHi9d
dp9iMerYaJtXWDyPGwk0vEFZTsjQomRz33KyRF2jGM/8QJH5X50UuYaDGQHTA6OH
5LSIfOf39hcXxssTAR+nZjJQIbNcJ5vXHXgGWWlA0TBF0/0eoJLsFehEEVKlLjUy
1bzM/90SgrTFFbJWULm1Y/0phAl02v/4NSKWg2x2hlJDRbttHrskVg4Y5p5wmvo=
=y+sn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio: fixes
A couple of fixes to amd iommu, and a fix to virtio iommu.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 28 Jun 2018 02:46:45 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio-rng: process pending requests on DRIVER_OK
hw/i386: Fix AMDVI GATS and HATS encodings
hw/i386: Fix IVHD entry length for AMD IOMMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set xhci into error state instead of throwing a core dump.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180702162752.29233-1-kraxel@redhat.com
Fetching qtd with the NULL address most likely makes no sense so from now
on, we handle it this case similarly as if the terminate (T) bit is not
set, which is already an exception as according to section 3.6 of the EHCI
spec there is no T bit defined for the current_qtd field.
The spec is a bit vague on how an EHCI driver should initialize these
fields: "The general operational model is that the host controller can
detect whether the overlay area contains a description of an active
transfer" (p. 49). QEMU primarily uses the QTD_TOKEN_ACTIVE bit of the
queue header to infer the activity state but there are other ways
conceivable.
This change allows QEMU to boot further into AmigaOS. The public available
version of the EHCI driver recycles queue heads in some rare conditions but
only clears the current_qtd field but not the status field. This works with
many available EHCI PCI cards but e.g., not with the Freescale USB
controller's found on the P5040. On the emulated EHCI controller of QEMU
the consequence is that some garbage was read in, which resulted in a
reset of the controller. This change fixes the problem.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20180625222718.4488-1-mail@sebastianbauer.info
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drivers for this card exists on PPC-based AmigaOS guests so it is useful to
allow users to emulate the graphics card for PPC machines.
As cirrus vga is currently preferred over std(vga) in absence of any user
choice, this change also sets the default display of spapr machines to
std as otherwise qemu refuses to start these machines. Not specifying an
explicit graphics mode is for instance done by 'make check'.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is currently not possible to run a pseries-2.12 or older machine
with HV KVM. QEMU prints the following and exits right away.
qemu-system-ppc64: KVM doesn't support for base page shift 34
The "hpt-max-page-size" capability was recently added to spapr to hide
host configuration details from HPT mode guests. Its default value for
newer machine types is 64k.
For backwards compatibility, pseries-2.12 and older machine types need
a different value. This is handled as usual in a class init function.
The default value is 16G, ie, all page sizes supported by POWER7 and
newer CPUs, but HV KVM requires guest pages to be hpa contiguous as
well as gpa contiguous. The default value is the page size used to
back the guest RAM in this case.
Unfortunately kvmppc_hpt_needs_host_contiguous_pages()->kvm_enabled() is
called way before KVM init and returns false, even if the user requested
KVM. We thus end up selecting 16G, which isn't supported by HV KVM. The
default value must be set during machine init, because we can safely
assume that KVM is initialized at this point.
We fix this by moving the logic to default_caps_with_cpu(). Since the
user cannot pass cap-hpt-max-page-size=0, we set the default to 0 in
the pseries-2.12 class init function and use that as a flag to do the
real work.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PPC440 SoCs such as the AMCC 460EX have a DMA controller which is used
by AmigaOS on the sam460ex. Implement the parts used by AmigaOS so it
can get further booting on the sam460ex machine.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Sam460ex has an M41T80 serial RTC chip on I2C bus 0 at address 0x68.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Basic emulation of the M41T80 serial (I2C) RTC chip. Only getting time
of day is implemented. Setting time and RTC alarm are not supported.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rewrite to make it closer to how real device works so that guest OS
drivers can access I2C devices. Previously this was only a hack to
allow U-Boot to get past accessing SPD EEPROMs but to support other
I2C devices and allow guests to access them we need to model real
device more properly.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present the Sam460ex board is activated by the general CONFIG_PPC4XX
option. However that includes the board for both ppc-softmmu and
(deprecated) ppcemb-softmmu builds. As Sam460ex is developed, that would
require adding more things into ppcemb-softmmu, which we don't want to do.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit d35aefa9ae ("ppc/pnv: introduce a new intc_create() operation
to the chip model") changed the object link in the pnv_core_realize()
routine but a return was forgotten in case of error, which can lead to
more problems afterwards (segv)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the previous changes, we can now let the ICS_KVM class inherit
directly from ICS_BASE class and not from the intermediate ICS_SIMPLE.
It makes the class hierarchy much cleaner.
What is left in the top classes is the low level interface to access
the KVM XICS device in ICS_KVM and the XICS emulating handlers in
ICS_SIMPLE.
This should not break migration compatibility.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Just like for the realize handlers, this makes possible to move the
common ICSState code of the reset handlers in the ics-base class.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This makes possible to move the common ICSState code of the realize
handlers in the ics-base class.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This changes the ICP realize and reset handlers in DeviceRealize and
DeviceReset handlers. parent handlers are now called from the
inheriting classes which is a cleaner object pattern.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
sam460ex (or at least this emulation) does not support the "ibm,cpm" power
management. As a result, Linux crashes when trying to access it. Remove
its device tree node. Also, if/when we boot the Linux kernel directly,
serial port clock frequencies in the device tree file will be unset, and
serial port initialization will fail. Add valid frequency values to
the serial ports to be able to use it. Also set valid values for the other
clock nodes otherwise set by u-boot.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 84051eb400 "adb: add property to disable direct reg 3 writes" added a
workaround for MacOS 9 incorrectly setting the mouse address during boot of
PMU machines.
Further testing has shown that since fb6649f172 "adb: fix read reg 3 byte
ordering" this can still sometimes happen with the CUDA mac99 machine,
so let's enable this workaround for all New World machines using ADB for now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This enables us to apply the same filter in DEBUG_DBDMA_CHANMASK to the
DBDMA command execution debug output.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- add bpb/ppa15 features to default cpu model for z196 and later
- rework TOD handling and fix cpu hotplug under tcg
- various fixes
-----BEGIN PGP SIGNATURE-----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=GF+m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180702' into staging
s390x updates:
- add bpb/ppa15 features to default cpu model for z196 and later
- rework TOD handling and fix cpu hotplug under tcg
- various fixes
# gpg: Signature made Mon 02 Jul 2018 12:09:40 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180702:
s390x/tcg: fix locking problem with tcg_s390_tod_updated
s390x/kvm: indicate alignment in legacy_s390_alloc()
s390x/kvm: legacy_s390_alloc() only supports one allocation
s390x/tcg: fix CPU hotplug with single-threaded TCG
s390x/tcg: rearm the CKC timer during migration
s390x/tcg: implement SET CLOCK
s390x/tcg: SET CLOCK COMPARATOR can clear CKC interrupts
s390x/tcg: properly implement the TOD
s390x/tcg: drop tod_basetime
s390x/tod: factor out TOD into separate device
s390x/kvm: pass values instead of pointers to kvm_s390_set_clock_*()
s390x/tcg: avoid overflows in time2tod/tod2time
s390x/cpumodel: default enable bpb and ppa15 for z196 and later
loader: Check access size when calling rom_ptr() to avoid crashes
s390/ipl: fix ipl with -no-reboot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-38-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-37-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-36-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20180625124238.25339-35-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '[<>][<>]=? ?[1-5]0' hw/ include/hw/
and modified manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20180625124238.25339-33-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-30-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-29-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael Walle <michael@walle.cc>
Message-Id: <20180625124238.25339-28-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-27-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-26-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
