Rename the TYPE_PPC4xx_PCI_HOST_BRIDGE define and its string value to
match each other and other similar types and to avoid confusion with
"ppc4xx-host-bridge" type defined in same file.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <c59c28ef440633dbd1de0bda0a93b7862ef91104.1688641673.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reduce the iomem region to 64K and use it for the PCI io space and map
it directly from the board without an intermediate alias that is not
really needed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <f4ad9af42197a92dd1d0b56c21316dbdad240ee4.1688641673.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The iomem memory region is better used for the PCI IO space but
currently used for registers. Stop using it for that to allow this to
be cleaned up in the next patch.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <3def68f200edd4540393d6b3b03baabe15d649f2.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some places already use get_system_memory() directly so replace the
remaining uses and drop the local variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <d134d64f13258d1f157b445fedb1e86cf3abb606.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After previous changes we can now remove the legacy init function and
move the device creation to board code.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <29aafeea9f1c871c739600a7b093c5456e8a1dc8.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of guessing controller number from dcrn_base add a property so
the device does not need knowledge about where it is used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <fdb84344025e00fadf74d0be95665fcb0ac1e039.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add separate memory regions for the mem and io spaces of the PCIe bus
to avoid different buses using the same system io region.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <b631c3a61729eee2166d899b8888164ebeb71574.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename local variable storing state struct in dcr_read_pcie() for
brevity and consistency with other functions.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <7b6f0033ada74075fc094b1397deb406e1a05741.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QOM prefers to call the parent field parent_obj, change
PPC460EXPCIEState ro match that convention.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <6995f28215d2a489a661b7d91a1783048829d467.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is shorter and more readable to wrap the complex call to
ppc_dcr_register() in a macro than to repeat it several times.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <4dec5ef8115791dc67253afdff9a703eb816a2a8.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PCIe controller model uses PPC DCRs but cannot be modeled with
TYPE_PPC4xx_DCR_DEVICE as it derives from TYPE_PCIE_HOST_BRIDGE. Add a
cpu link property to it similar to other DCR devices to allow
registering DCRs from the device model.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <a79796654deaa81a6a1c71efc874e4d88c4cafd4.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change parameter of ppc460ex_pcie_init() from env to cpu to allow
further refactoring.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <1695d7cc1a9f1070ab498c078916e2389d6e9469.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This copies ppc_pseries.py to start a set of powernv tests, including
a Linux boot test for the newly added SMT mode.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Set the TIR default value with the SMT thread index, and place some
standard limits on SMT configurations. Now powernv is able to boot
skiboot and Linux with a SMT topology, including booting a KVM guest.
There are several SPRs and other features (e.g., broadcast msgsnd)
that are not implemented, but not used by OPAL or Linux and can be
added incrementally.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
HID is a per-core shared register, skiboot sets this (e.g., setting
HILE) on one thread and that must affect all threads of the core.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Power ISA has the concept of sub-processors:
Hardware is allowed to sub-divide a multi-threaded processor into
"sub-processors" that appear to privileged programs as multi-threaded
processors with fewer threads.
POWER9 and POWER10 have two modes, either every thread is a
sub-processor or all threads appear as one multi-threaded processor. In
the user manuals these are known as "LPAR per thread" / "Thread LPAR",
and "LPAR per core" / "1 LPAR", respectively.
The practical difference is: in thread LPAR mode, non-hypervisor SPRs
are not shared between threads and msgsndp can not be used to message
siblings. In 1 LPAR mode, some SPRs are shared and msgsndp is usable.
Thrad LPAR allows multiple partitions to run concurrently on the same
core, and is a requirement for KVM to run on POWER9/10 (which does not
gang-schedule an LPAR on all threads of a core like POWER8 KVM).
Traditionally, SMT in PAPR environments including PowerVM and the
pseries QEMU machine with KVM acceleration behaves as in 1 LPAR mode.
In OPAL systems, Thread LPAR is used. When adding SMT to the powernv
machine, it is therefore preferable to emulate Thread LPAR.
To account for this difference between pseries and powernv, an LPAR mode
flag is added such that SPRs can be implemented as per-LPAR shared, and
that becomes either per-thread or per-core depending on the flag.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The low-level functions to access the TIMA take a presenter object as
a first argument. When accessing the TIMA from the IC BAR,
i.e. indirect calls, we currently pass a NULL pointer for the
presenter argument. While it appears ok with the current usage, it's
dangerous. And it's pretty easy to figure out the presenter in that
context, so this patch fixes it.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230705081400.218408-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add the CPU target in the trace when reading/writing the TIMA
space. It was already done for other TIMA ops (notify, accept, ...),
only missing for those 2. Useful for debug and even more now that we
experiment with SMT.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230705110039.231148-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This also changes type of sz local variable to ssize_t because it is
used to store return value of load_elf() and load_image_targphys() that
return ssize_t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20230704181920.27B58746335@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We currently only allow 64-bit operations on the ESB CI pages. There's
no real reason for that limitation, skiboot/linux didn't need
more. However the hardware supports any size, so this patch relaxes
that restriction. It impacts both the ESB pages for "normal"
interrupts as well as the ESB pages for escalation interrupts defined
for the ENDs.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230704144848.164287-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Firmware now warns if booting in LPAR per core mode (PPC bit 62). So
this warning doesn't trigger, report the core thread state is 0.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-6-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Like the quad xscoms, add a core model for P10 to allow future
differentiation from P9.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-5-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add a PnvQuad class for the P10 powernv machine. No xscoms are
implemented yet, but this allows them to be added.
The size is reduced to avoid the quad region from overlapping with the
core region.
address-space: xscom-0
0000000000000000-00000003ffffffff (prio 0, i/o): xscom-0
0000000100000000-00000001000fffff (prio 0, i/o): xscom-quad.0
0000000100108000-0000000100907fff (prio 0, i/o): xscom-core.3
0000000100110000-000000010090ffff (prio 0, i/o): xscom-core.2
0000000100120000-000000010091ffff (prio 0, i/o): xscom-core.1
0000000100140000-000000010093ffff (prio 0, i/o): xscom-core.0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-4-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Make the existing pnv_quad_xscom_read/write be P9 specific, in
preparation for a different P10 callback.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-3-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the functions to include P9 in the name in preparation for adding
P10 versions.
Correct the unimp read message while we're changing the function.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-2-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
On the powernv9 and powernv10 machines, the PSIHB interrupts are
currently initialized with a PQ state of 0b01, i.e. interrupts are
disabled. However real hardware initializes them to 0b00 for the
PSIHB. This patch updates it, in case an hypervisor is in the mood of
checking it.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230703081215.55252-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PQ state of a xive interrupt is always initialized to Q=1, which
means the interrupt is disabled. Since a xive source can be embedded
in many objects, this patch adds a property to allow that behavior to
be refined if needed.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230703081215.55252-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Direct TIMA operations can be done through 4 pages, each with a
different privilege level dictating what fields can be accessed. On
the other hand, indirect TIMA accesses on P10 are done through a
single page, which is the equivalent of the most privileged page of
direct TIMA accesses.
The offset in the IC bar of an indirect access specifies what hw
thread is targeted (page shift bits) and the offset in the
TIMA being accessed (the page offset bits). When the indirect
access is calling the underlying direct access functions, it is
therefore important to clearly separate the 2, as the direct functions
assume any page shift bits define the privilege ring level. For
indirect accesses, those bits must be 0. This patch fixes the offset
passed to direct TIMA functions.
It didn't matter for SMT1, as the 2 least significant bits of the page
shift are part of the hw thread ID and always 0, so the direct TIMA
functions were accessing the privilege ring 0 page. With SMT4/8, it is
no longer true.
The fix is specific to P10, as indirect TIMA access on P9 was handled
differently.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230703080858.54060-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently on PPC64 qemu always dumps the guest memory in
Big Endian (BE) format even though the guest running in Little Endian
(LE) mode. So crash tool fails to load the dump as illustrated below:
Log :
$ virsh dump DOMAIN --memory-only dump.file
Domain 'DOMAIN' dumped to dump.file
$ crash vmlinux dump.file
<snip>
crash 8.0.2-1.el9
WARNING: endian mismatch:
crash utility: little-endian
dump.file: big-endian
WARNING: machine type mismatch:
crash utility: PPC64
dump.file: (unknown)
crash: dump.file: not a supported file format
<snip>
This happens because cpu_get_dump_info() passes cpu->env->has_hv_mode
to function ppc_interrupts_little_endian(), the cpu->env->has_hv_mode
always set for powerNV even though the guest is not running in hv mode.
The hv mode should be taken from msr_mask MSR_HVB bit
(cpu->env.msr_mask & MSR_HVB). This patch fixes the issue by passing
MSR_HVB value to ppc_interrupts_little_endian() in order to determine
the guest endianness.
The crash tool also expects guest kernel endianness should match the
endianness of the dump.
The patch was tested on POWER9 box booted with Linux as host in
following cases:
Host-Endianess Qemu-Target-Machine Qemu-Generated-Guest
Memory-Dump-Format
BE powernv(OPAL/PowerNV) LE
BE powernv(OPAL/PowerNV) BE
LE powernv(OPAL/PowerNV) LE
LE powernv(OPAL/PowerNV) BE
LE pseries(OPAL/PowerNV/pSeries) KVMHV LE
LE pseries TCG LE
Fixes: 5609400a42 ("target/ppc: Set the correct endianness for powernv memory
dumps")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-ID: <20230623072506.34713-1-nnmlinux@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can get CPUState from env with env_cpu without going through
PowerPCCPU and casting that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <28424220f37f51ce97f24cadc7538a9c0d16cb45.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 7a3fe174b1 removed usage of POWERPC_SYSCALL_VECTORED, drop
the unused define as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <50adc24f9d408882128e896d8a81a1a059c41836.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some helpers only have a CPUState local to call cpu_interrupt_exittb()
but we can use env_cpu for that and remove the local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <aa34e449552c6ab52d48938ccbe762fc06adac01.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All powerpc exception handlers share some code when handling machine
check exceptions. Move this to a common function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <9cfffaa35aa894086dd092af6b0b26f2d62ff3de.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
CPUState is rarely needed by this function (only for logging a fatal
error) and it's easy to get from the env parameter so passing it
separately is not necessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <f42761401c708fd6e02f7523d9f709b1972e5863.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Booting linux on the powernv10 machine logs a few errors like:
Invalid read at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8)
Invalid write at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8)
Invalid read at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8)
Those errors happen when linux is resetting XIVE. We're trying to
read/write the enablement bit for the hardware context and qemu
doesn't allow indirect TIMA accesses of less than 8 bytes. Direct TIMA
access can go through though, as well as indirect TIMA accesses on P9.
So even though there are some restrictions regarding the address/size
combinations for TIMA access, the example above is perfectly valid.
This patch lets indirect TIMA accesses of all sizes go through. The
special operations will be intercepted and the default "raw" handlers
will pick up all other requests and complain about invalid sizes as
appropriate.
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230626094057.1192473-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The powernv machine can boot Linux to VFS mount with icount enabled.
Add a test case for it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230625103700.8992-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Several instructions and register access require icount reads and are
missing translator_io_start().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230625103700.8992-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Apple sungem devices are expected to have WOL MMIO registers.
Add a region to prevent transaction failures, and implement the
WOL-disable CSR write because the Linux driver reset writes
this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20230625201628.65231-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TFMR is the Time Facility Management Register which is specific to
POWER CPUs, and used for the purpose of timebase management (generally
by firmware, not the OS).
Add helpers for the TFMR register, which will form part of the core
timebase facility model in future but for now behaviour is unchanged.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230625120317.13877-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POWER book4 (implementation-specific) SPRs are sometimes in their own
functions, but in other cases are mixed with architected SPRs. Do some
spring cleaning on these.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230625120317.13877-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We don't emulate the gigabit ethernet part of the chip but the MorphOS
driver accesses these and expects to get some valid looking result
otherwise it hangs. Add some minimal dummy implementation to avoid rhis.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230605215145.29458746335@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No need to generate TCG-specific decodetree files
when TCG is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230626140100.67941-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The clock update logic reads the clock twice to compute the new clock
value, with a value derived from the later time subtracted from a value
derived from the earlier time. The delta causes time to be lost.
This can ultimately result in time becoming unsynchronized between CPUs
and that can cause OS lockups, timeouts, watchdogs, etc. This can be
seen running a KVM guest (that causes lots of TB updates) on a powernv
SMP machine.
Fix this by reading the clock once.
Cc: qemu-stable@nongnu.org
Fixes: dbdd25065e ("Implement time-base start/stop helpers.")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230629020713.327745-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
HDEC interrupts are edge-triggered on HDECR underflow (notably different
from DEC which is level-triggered).
HDEC interrupts already clear the irq on delivery so that does not need
to be changed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230625122045.15544-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
skiboot only uses mmio to access the PSI registers (once the BAR is
set) but we don't have any reason to block the accesses through
xscom. This patch enables xscom access to the PSI registers. It
converts the xscom addresses to mmio addresses, which requires a bit
of care for the PSIHB, then reuse the existing mmio ops.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230630102609.193214-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* Add raw_writes ops for register whose write induce TLB maintenance
* hw/arm/sbsa-ref: use XHCI to replace EHCI
* Avoid splitting Zregs across lines in dump
* Dump ZA[] when active
* Fix SME full tile indexing
* Handle IC IVAU to improve compatibility with JITs
* xlnx-canfd-test: Fix code coverity issues
* gdbstub: Guard M-profile code with CONFIG_TCG
* allwinner-sramc: Set class_size
* target/xtensa: Assert that interrupt level is within bounds
* Avoid over-length shift in arm_cpu_sve_finalize() error case
* Define new 'neoverse-v1' CPU type
-----BEGIN PGP SIGNATURE-----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=/MkB
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230706' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Add raw_writes ops for register whose write induce TLB maintenance
* hw/arm/sbsa-ref: use XHCI to replace EHCI
* Avoid splitting Zregs across lines in dump
* Dump ZA[] when active
* Fix SME full tile indexing
* Handle IC IVAU to improve compatibility with JITs
* xlnx-canfd-test: Fix code coverity issues
* gdbstub: Guard M-profile code with CONFIG_TCG
* allwinner-sramc: Set class_size
* target/xtensa: Assert that interrupt level is within bounds
* Avoid over-length shift in arm_cpu_sve_finalize() error case
* Define new 'neoverse-v1' CPU type
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmSmwEEZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vBcD/4vKUw6klRV7vyz/KBr2AOi
# Z1FnkLmOhwdp7CKvAVfU58TbPEJ8Fjo7OjziByV5nn/Ht9XrXcdl/E+0JamgrJ/n
# G90ZfpoY3Boan4XBukBz/KX63sT1erF4io1NxbvqLxZ2mbZWNb0D1v2qkxC5zPFE
# 97knlbSle4/VB8N6VgaPaWKVy5gmBZQwl7NUlFtB8TTZp3HPo0V77E9p1Wqpwpls
# BNbqdtgUre3dlJci2f24PmXHYraKa68qk9xGnsSae96EY2+pOHbKhoZ/Fobaor2C
# u+dfgQ3fY3aLDVKx8UESIUoqkGoVqwEbmt+pWG2rJiljLkdsI3ZsVq7p3+VGbLAN
# berL14kCC2vRQYeNUwxeh5wdNVXc58xhWI5KXQRe8hr1dKWS5LQEHWgr7g7mb0+m
# zPHqbdF4FR1DAV29vQ9WyK4zttrinFAYl+zvLyd8dX2ogoUeivR+4o3YX4hlFr4H
# vcrglZbCGqAb3oKQG3PSGliS9GYtBwodLqKEH8PfcwfOP5PIcnSVc0Kl9DSzf7um
# dAuYpaK/XW3MPx5qpWjnip4dRWUV5m/6nSCJr+fELEv3A0sGZY4pywv5NS/Yg1wE
# nXdi8D+nyx9+AAiWTcB+ePsLuDEO2gYtubfqed99TFoJbL6/b4NbH8YE6cF3N/gY
# lqFyvEIYNJZ9klf7XKnX2w==
# =/MkB
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Jul 2023 02:23:13 PM BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20230706' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Avoid over-length shift in arm_cpu_sve_finalize() error case
target/arm: Define neoverse-v1
target/arm: Suppress more TCG unimplemented features in ID registers
target/xtensa: Assert that interrupt level is within bounds
hw: arm: allwinner-sramc: Set class_size
target/arm: gdbstub: Guard M-profile code with CONFIG_TCG
tests/qtest: xlnx-canfd-test: Fix code coverity issues
target/arm: Handle IC IVAU to improve compatibility with JITs
target/arm: Fix SME full tile indexing
target/arm: Dump ZA[] when active
target/arm: Avoid splitting Zregs across lines in dump
tests/tcg/aarch64/sysregs.c: Use S syntax for id_aa64zfr0_el1 and id_aa64smfr0_el1
hw/arm/sbsa-ref: use XHCI to replace EHCI
target/arm: Add raw_writes ops for register whose write induce TLB maintenance
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If you build QEMU with the clang sanitizer enabled, you can see it
fire when running the arm-cpu-features test:
$ QTEST_QEMU_BINARY=./build/arm-clang/qemu-system-aarch64 ./build/arm-clang/tests/qtest/arm-cpu-features
[...]
../../target/arm/cpu64.c:125:19: runtime error: shift exponent 64 is too large for 64-bit type 'unsigned long long'
[...]
This happens because the user can specify some incorrect SVE
properties that result in our calculating a max_vq of 0. We catch
this and error out, but before we do that we calculate
vq_mask = MAKE_64BIT_MASK(0, max_vq);$
and the MAKE_64BIT_MASK() call is only valid for lengths that are
greater than zero, so we hit the undefined behaviour.
Change the logic so that if max_vq is 0 we specifically set vq_mask
to 0 without going via MAKE_64BIT_MASK(). This lets us drop the
max_vq check from the error-exit logic, because if max_vq is 0 then
vq_map must now be 0.
The UB only happens in the case where the user passed us an incorrect
set of SVE properties, so it's not a big problem in practice.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230704154332.3014896-1-peter.maydell@linaro.org
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
