When vhost-user or vhost-kernel is handling virtio net datapath,
QEMU should not touch used ring.
But with vhost-user socket reconnect scenario, in a very rare case
(has pending kick event). VRING_USED_F_NO_NOTIFY is set by QEMU in
following code path:
#0 virtio_queue_split_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:511
#1 0x0000559d6dbf033b in virtio_queue_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:576
#2 0x0000559d6dbbbdbc in virtio_net_handle_tx_bh (vdev=0x559d703a6aa0, vq=0x7ff5f4c920a8) at ../hw/net/virtio-net.c:2801
#3 0x0000559d6dbf4791 in virtio_queue_notify_vq (vq=0x7ff5f4c920a8) at ../hw/virtio/virtio.c:2248
#4 0x0000559d6dbf79da in virtio_queue_host_notifier_read (n=0x7ff5f4c9211c) at ../hw/virtio/virtio.c:3525
#5 0x0000559d6d9a5814 in virtio_bus_cleanup_host_notifier (bus=0x559d703a6a20, n=1) at ../hw/virtio/virtio-bus.c:321
#6 0x0000559d6dbf83c9 in virtio_device_stop_ioeventfd_impl (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3774
#7 0x0000559d6d9a55c8 in virtio_bus_stop_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:259
#8 0x0000559d6d9a53e8 in virtio_bus_grab_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:199
#9 0x0000559d6dbf841c in virtio_device_grab_ioeventfd (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3783
#10 0x0000559d6d9bde18 in vhost_dev_enable_notifiers (hdev=0x559d707edd70, vdev=0x559d703a6aa0) at ../hw/virtio/vhost.c:1592
#11 0x0000559d6d89a0b8 in vhost_net_start_one (net=0x559d707edd70, dev=0x559d703a6aa0) at ../hw/net/vhost_net.c:266
#12 0x0000559d6d89a6df in vhost_net_start (dev=0x559d703a6aa0, ncs=0x559d7048d890, data_queue_pairs=31, cvq=0) at ../hw/net/vhost_net.c:412
#13 0x0000559d6dbb5b89 in virtio_net_vhost_status (n=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:311
#14 0x0000559d6dbb5e34 in virtio_net_set_status (vdev=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:392
#15 0x0000559d6dbb60d8 in virtio_net_set_link_status (nc=0x559d7048d890) at ../hw/net/virtio-net.c:455
#16 0x0000559d6da64863 in qmp_set_link (name=0x559d6f0b83d0 "hostnet1", up=true, errp=0x7ffdd76569f0) at ../net/net.c:1459
#17 0x0000559d6da7226e in net_vhost_user_event (opaque=0x559d6f0b83d0, event=CHR_EVENT_OPENED) at ../net/vhost-user.c:301
#18 0x0000559d6ddc7f63 in chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:62
#19 0x0000559d6ddc7fdc in qemu_chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:82
This issue causes guest kernel stop kicking device and traffic stop.
Add vhost_started check in virtio_net_handle_tx_bh to fix this wrong
VRING_USED_F_NO_NOTIFY set.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240402045109.97729-1-yajunw@nvidia.com>
[PMD: Use unlikely()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In xen_evtchn_soft_reset() variable flush_kvm_routes can
be used before being initialized.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Oleg Sviridov <oleg.sviridov@red-soft.ru>
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240329113939.257033-1-artem.chernyshev@red-soft.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It was noticed that my linux.vnet.ibm.com address does not
always work so dropping the vnet to see if that works better.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Message-ID: <20240328194914.2145709-1-milesg@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
../hw/nvme/ctrl.c:6081:21: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
It's not obvious that 'result' is set in all code paths. When &result is
a returned argument, it's even less clear.
Looking at various assignments, 0 seems to be a suitable default value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-ID: <20240328102052.3499331-18-marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity complains that the check introduced in commit 3f934817 suggests
that qiov could be NULL and we dereference it before reaching the check.
In fact, all of the callers pass a non-NULL pointer, so just remove the
misleading check.
Resolves: Coverity CID 1542668
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240327192750.204197-1-kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CXL is based on PCIe. In is pointless to initialize
its context on non-PCI machines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20240327161642.33574-1-philmd@linaro.org>
The commit 15002f60f7 ("util: rename qemu-error.c to match its header
name") renamed util/qemu-error.c to util/error-report.c but missed to
change the corresponding entry.
To avoid get_maintainer.pl failing, update the error-report.c entry.
Fixes: 15002f60f7 ("util: rename qemu-error.c to match its header name")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240327115539.3860270-1-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since size_to_prdtl() is only used within ahci.c,
declare it statically. This removes the last use
of "inlined function with external linkage". See
previous commit and commit 9de9fa5cf2 for rationale.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240326171009.26696-4-philmd@linaro.org>
See previous commit and commit 9de9fa5cf2 ("Avoid using inlined
functions with external linkage") for rationale.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313184954.42513-3-philmd@linaro.org>
Similarly to commit 9de9fa5cf2 ("hw/arm/smmu-common: Avoid using
inlined functions with external linkage"):
None of our code base require / use inlined functions with external
linkage. Some places use internal inlining in the hot path. These
two functions are certainly not in any hot path and don't justify
any inlining, so these are likely oversights rather than intentional.
Fix:
C compiler for the host machine: clang (clang 15.0.0 "Apple clang version 15.0.0 (clang-1500.3.9.4)")
...
hw/arm/smmu-common.c:203:43: error: static function 'smmu_hash_remove_by_vmid' is
used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
g_hash_table_foreach_remove(s->iotlb, smmu_hash_remove_by_vmid, &vmid);
^
include/hw/arm/smmu-common.h:197:1: note: use 'static' to give inline function 'smmu_iotlb_inv_vmid' internal linkage
void smmu_iotlb_inv_vmid(SMMUState *s, uint16_t vmid);
^
static
hw/arm/smmu-common.c:139:17: note: 'smmu_hash_remove_by_vmid' declared here
static gboolean smmu_hash_remove_by_vmid(gpointer key, gpointer value,
^
Fixes: ccc3ee3871 ("hw/arm/smmuv3: Add CMDs related to stage-2")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240313184954.42513-2-philmd@linaro.org>
Unify with other init_excp_FOO() in the same file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240313213339.82071-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313213339.82071-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313213339.82071-3-philmd@linaro.org>
The CONFIG_SOFTMMU_GATE definition was never used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313213339.82071-2-philmd@linaro.org>
virsh qemu-monitor-command --hmp help information of
watchdog_action missing inject-nmi which already supported
in Commit 795dc6e4
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2247
Signed-off-by: Dayu Liu <liu.dayu@zte.com.cn>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Mjt: decode and word-wrap commit message and add Resolves: tag]
Change the board revision number and RAM size to 1Gb on 32-bit hosts.
On these systems, RAM has a 2047 MB limit and this breaks the tests.
Fixes: 7785e8ea22 ("hw/arm: Introduce Raspberry PI 4 machine")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240329150155.357043-1-clg@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test mangles the GPIO address and the pin number in the
qtest_add_data_func data parameter. Doing so, it assumes that the host
pointer size is always 64-bit, which breaks on 32-bit :
../tests/qtest/stm32l4x5_gpio-test.c: In function ‘test_gpio_output_mode’:
../tests/qtest/stm32l4x5_gpio-test.c:272:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
272 | unsigned int pin = ((uint64_t)data) & 0xF;
| ^
../tests/qtest/stm32l4x5_gpio-test.c:273:22: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
273 | uint32_t gpio = ((uint64_t)data) >> 32;
| ^
To fix, improve the mangling of the GPIO address and pin number fields
by using GPIO_SIZE so that the resulting value fits in a 32-bit pointer.
While at it, include some helpers to hide the details.
Cc: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Cc: Inès Varhol <ines.varhol@telecom-paris.fr>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240329092747.298259-1-clg@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the group of the highest priority pending interrupt is disabled
via ICC_IGRPEN*, the ICC_HPPIR* registers should return
INTID_SPURIOUS, not the interrupt ID. (See the GIC architecture
specification pseudocode functions ICC_HPPIR1_EL1[] and
HighestPriorityPendingInterrupt().)
Make HPPIR reads honour the group disable, the way we already do
when determining whether to preempt in icc_hppi_can_preempt().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240328153333.2522667-1-peter.maydell@linaro.org
Hardware of sbsa-ref board is nowadays defined by both BSA and SBSA
specifications. Then BBR defines firmware interface.
Added note about DeviceTree data passed from QEMU to firmware. It is
very minimal and provides only data we use in firmware.
Added NUMA information to list of things reported by DeviceTree.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20240328163851.1386176-1-marcin.juszkiewicz@linaro.org
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The HSTR_EL2 register allows the hypervisor to trap AArch32 EL1 and
EL0 accesses to cp15 registers. We incorrectly implemented this so
they trap to EL1 when we detect the need for a HSTR trap at code
generation time. (The check in access_check_cp_reg() which we do at
runtime to catch traps from EL0 is correctly routing them to EL2.)
Use the correct target EL when generating the code to take the trap.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2226
Fixes: 049edada5e ("target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240325133116.2075362-1-peter.maydell@linaro.org
TILE-Gx has been removed during the v6.0 release (see
commit 2cc1a90166 "Remove deprecated target tilegx"),
no need to mention it in the list of "supported targets".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes the invalid bInterfaceProtocol value 0x04 in the USB audio
AudioControl descriptors. It should be zero. While Linux and Windows
forgive this error, macOS 14 Sonoma does not. The usb-audio device does
not appear in macOS sound settings even though the device is recognized
and shows up in USB system information. According to the USB audio class
specs 1.0-4.0, valid values are 0x00, 0x20, 0x30 and 0x40. (Note also
that Linux prints the warning "unknown interface protocol 0x4, assuming
v1", but then proceeds as if the value was zero.)
This also fixes the invalid wTotalLength value in the multi-channel
setup AudioControl interface header descriptor (used when multi=on
and out.mixing-engine off). The combined length of all the descriptors
there add up to 0x37, not 0x38. In Linux, "lsusb -D ..." displays
incomplete descriptor information when this length is incorrect.
Signed-off-by: Joonas Kankaala <joonas.a.kankaala@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- Avihai's two fixes on error paths
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZgmsOxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1waYKQD9G/B4c5u94Puhkr4o+K4M3FZ3J1pSpYRd
nMAlrCWYLHQBAKV5q8DvgXbRNzT/Q+1UX7psxIsjyaqljxyJoZ+dIgAD
=hucV
-----END PGP SIGNATURE-----
Merge tag 'migration-20240331-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull for 9.0-rc2
- Avihai's two fixes on error paths
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZgmsOxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1waYKQD9G/B4c5u94Puhkr4o+K4M3FZ3J1pSpYRd
# nMAlrCWYLHQBAKV5q8DvgXbRNzT/Q+1UX7psxIsjyaqljxyJoZ+dIgAD
# =hucV
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 31 Mar 2024 19:32:27 BST
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240331-pull-request' of https://gitlab.com/peterx/qemu:
migration/postcopy: Ensure postcopy_start() sets errp if it fails
migration: Set migration error in migration_completion()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are several places where postcopy_start() fails without setting
errp. This can cause a null pointer de-reference, as in case of error,
the caller of postcopy_start() copies/prints the error set in errp.
Fix it by setting errp in all of postcopy_start() error paths.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: 908927db28 ("migration: Update error description whenever migration fails")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240328140252.16756-3-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
After commit 9425ef3f99 ("migration: Use migrate_has_error() in
close_return_path_on_source()"), close_return_path_on_source() assumes
that migration error is set if an error occurs during migration.
This may not be true if migration errors in migration_completion(). For
example, if qemu_savevm_state_complete_precopy() errors, migration error
will not be set.
This in turn, will cause a migration hang bug, similar to the bug that
was fixed by commit 22b04245f0 ("migration: Join the return path
thread before releasing to_dst_file"), as shutdown() will not be issued
for the return-path channel.
Fix it by ensuring migration error is set in case of error in
migration_completion().
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Fixes: 9425ef3f99 ("migration: Use migrate_has_error() in close_return_path_on_source()")
Acked-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240328140252.16756-2-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
-----BEGIN PGP SIGNATURE-----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=7UPB
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu into staging
Various fixes for recent regressions and new code.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmYJEQMACgkQZ7MCdqhi
# HK6l0BAAkVf/BXKJxMu3jLvCpK/fBYGytvfHBR9PdWeBwIirqsk3L8eI/Fb5qkMZ
# NMrfECyHR9LTcWb6/Pi/PGciNNWeyleN6IuVBeWfraIFyfHcxpwEKH8P+cXr5EWq
# WDg+1GUt9+FHuAC9UdGZ81UzX7qeI9VfD3wHceqJ/XRU3qjj67DPZjTpsvxuP64+
# N7MhdEM69F34uiIAn1aNCceXiS00dvtu6lDl3+18TzT8sNc6S3qdyxVcqfRhTJfY
# FMZIN3j2hQrVOElEQE9vAOeJyjAQCM+U0y3XZIZHFUw/GTwKV0tm08RFnnxprteG
# 67vR5uXrDEELnU/1PA1YeyaBMA3Z3Nc36XbGf8zTD6rKkS2z0lWMcs72pPIxbMXj
# c4FdnHaE+Q5ngy5s1p6bm5xM7WOEhrsJkgIu2N0weRroe0nAxywDWw3uQlMoV8Oc
# Xet/xM2IKdc0PLzTvFO7xKnW3oqavJ4CX/6XgrGBoMDZKO1JRqaMixGtYKmoH/1h
# 96+jdRbPTZAY8aoiFWW7t065lvdWt74A6QITcn2Kqm04j3MGJfyWMU6dakBzwuri
# PhOkf40o8qn8KN0JNfSO+IXhYVRRotLO/s9H7TEyQiXm25qrGMIF9FErnbDseZil
# rGR4eL0lcwJboYH9RSRWg0NNqpUekvqBzdnS+G0Ad3J+qaMYoik=
# =7UPB
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 31 Mar 2024 08:30:11 BST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu:
tests/avocado: ppc_hv_tests.py set alpine time before setup-alpine
tests/avocado: Fix ppc_hv_tests.py xorriso dependency guard
target/ppc: Do not clear MSR[ME] on MCE interrupts to supervisor
target/ppc: Fix GDB register indexing on secondary CPUs
target/ppc: Restore [H]DEXCR to 64-bits
target/ppc/mmu-radix64: Use correct string format in walk_tree()
hw/ppc/spapr: Include missing 'sysemu/tcg.h' header
spapr: nested: use bitwise NOT operator for flags check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the time is wrong, setup-alpine SSL certificate checks can fail.
setup-alpine is used to bring up the network, but it doesn't seem
to to set NTP time before the failing SSL checks. This test has
recently started failing presumably because the default time has
now fallen too far behind.
Fix this by setting time from the host time before running setup-alpine.
Fixes: c9cb496710 ("tests/avocado: ppc add hypervisor tests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For some reason the skipIf missing_deps() check fails to skip the test
if it comes after the skipUnless lines, causing an error running on
systems without xorriso.
Avocado implements skipUnless is just an inverted skipIf, so it's not
clear what the bug is or why this fixes it. For now it's enough to
get things working.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2246
Fixes: c9cb496710 ("tests/avocado: ppc add hypervisor tests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Hardware clears the MSR[ME] bit when delivering a machine check
interrupt, so that is what QEMU does.
The spapr environment runs in supervisor mode though, and receives
machine check interrupts after they are processed by the hypervisor,
and MSR[ME] must always be enabled in supervisor mode (otherwise it
could checkstop the system). So MSR[ME] must not be cleared when
delivering machine checks to the supervisor.
The fix to prevent supervisor mode from modifying MSR[ME] also
prevented it from re-enabling the incorrectly cleared MSR[ME] bit
when returning from handling the interrupt. Before that fix, the
problem was not very noticable with well-behaved code. So the
Fixes tag is not strictly correct, but practically they go together.
Found by kvm-unit-tests machine check tests (not yet upstream).
Fixes: 678b6f1af7 ("target/ppc: Prevent supervisor from modifying MSR[ME]")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The GDB server protocol assigns an arbitrary numbering of the SPRs.
We track this correspondence on each SPR with gdb_id, using it to
resolve any SPR requests GDB makes.
Early on we generate an XML representation of the SPRs to give GDB,
including this numbering. However the XML is cached globally, and we
skip setting the SPR gdb_id values on subsequent threads if we detect
it is cached. This causes QEMU to fail to resolve SPR requests against
secondary CPUs because it cannot find the matching gdb_id value on that
thread's SPRs.
This is a minimal fix to first assign the gdb_id values, then return
early if the XML is cached. Otherwise we generate the XML using the
now already initialised gdb_id values.
Fixes: 1b53948ff8 ("target/ppc: Use GDBFeature for dynamic XML")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The DEXCR emulation was recently changed to a 32-bit register, possibly
because it does have a 32-bit read-only view. It is a full 64-bit
SPR though, so use the corresponding 64-bit write functions.
Fixes: fbda88f7ab ("target/ppc: Fix width of some 32-bit SPRs")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
'mask', 'nlb' and 'base_addr' are all uin64_t types.
Use the corresponding PRIx64 format.
Fixes: d2066bc50d ("target/ppc: Check page dir/table base alignment")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
"sysemu/tcg.h" declares tcg_enabled(), and is implicitly included.
Include it explicitly to avoid the following error when refactoring
headers:
hw/ppc/spapr.c:2612:9: error: call to undeclared function 'tcg_enabled'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
if (tcg_enabled()) {
^
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Check for flag bit in H_GUEST_GETSET_STATE_FLAG_GUEST_WIDE need to use
bitwise NOT operator to ensure no other flag bits are set.
Resolves: Coverity CID 1540008
Resolves: Coverity CID 1540009
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Using log_pc produces the pc at the beginning of TB,
not the actual pc installed by cpu_restore_state_from_tb,
which could be any of the guest instructions within TB.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'sign' computation is attempting to locate the sign bit that has
been repeated, so that we can test if that bit is known zero. That
computation can be zero if there are no known sign repetitions.
Cc: qemu-stable@nongnu.org
Fixes: 93a967fbb5 ("tcg/optimize: Propagate sign info for shifting")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2248
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Along this path we have already skipped the insn to be
nullified, so the subsequent insn should be executed.
Cc: qemu-stable@nongnu.org
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 32-bit PA-7300LC (PCX-L2) CPU and the 64-bit PA8700 (PCX-W2) CPU
use different diag instructions to save or restore the CPU registers
to/from the shadow registers.
Implement those per-CPU architecture diag instructions to fix those
parts of the HP ODE testcases (L2DIAG and WDIAG, section 1) which test
the shadow registers.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Use decodetree to distinguish cases]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>