The ISA specific Spike machines have been deprecated in QEMU since 4.1,
let's finally remove them.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Make it easier to copy all the persistent bitmaps of (the top layer
of) a source image along with its guest-visible contents, by adding a
boolean flag for use with qemu-img convert. This is basically
shorthand, as the same effect could be accomplished with a series of
'qemu-img bitmap --add' and 'qemu-img bitmap --merge -b source'
commands, or by their corresponding QMP commands.
Note that this command will fail in the same scenarios where 'qemu-img
measure' omits a 'bitmaps size:' line, namely, when either the source
or the destination lacks persistent bitmap support altogether.
See also https://bugzilla.redhat.com/show_bug.cgi?id=1779893
While touching this, clean up a couple coding issues spotted in the
same function: an extra blank line, and merging back-to-back 'if
(!skip_create)' blocks.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor. But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We always miswrote the Fuloong machine... Fix its name.
Add an machine alias to the previous name for backward
compatibility.
Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-id: <20200526104726.11273-11-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Provide a minimal documentation of the Musca boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-6-peter.maydell@linaro.org
Add basic documentation of the MPS2 board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-5-peter.maydell@linaro.org
Provide a minimal documentation of the Versatile Express boards
(vexpress-a9, vexpress-a15).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-4-peter.maydell@linaro.org
Sort the board index into alphabetical order. (Note that we need to
sort alphabetically by the title text of each file, which isn't the
same ordering as sorting by the filename.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-3-peter.maydell@linaro.org
Add 'Arm' to the Integrator/CP document title, for consistency with
the titling of the other documentation of Arm devboard models
(versatile, realview).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-2-peter.maydell@linaro.org
Include actions for --add, --remove, --clear, --enable, --disable, and
--merge (note that --clear is a bit of fluff, because the same can be
accomplished by removing a bitmap and then adding a new one in its
place, but it matches what QMP commands exist). Listing is omitted,
because it does not require a bitmap name and because it was already
possible with 'qemu-img info'. A single command line can play one or
more bitmap commands in sequence on the same bitmap name (although all
added bitmaps share the same granularity, and and all merged bitmaps
come from the same source file). Merge defaults to other bitmaps in
the primary image, but can also be told to merge bitmaps from a
distinct image.
While this supports --image-opts for the file being modified, I did
not think it worth the extra complexity to support that for the source
file in a cross-file merges. Likewise, I chose to have --merge only
take a single source rather than following the QMP support for
multiple merges in one go (although you can still use more than one
--merge in the command line); in part because qemu-img is offline and
therefore atomicity is not an issue.
Upcoming patches will add iotest coverage of these commands while
also testing other features.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We already list the subcommand summaries alphabetically, we should do
the same for the documentation related to subcommand-specific
parameters.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The mapping operation of large disks especially ones stored over a
long chain of QCOW2 files can take a long time to finish.
Additionally when mapping fails there was no way recover by
restarting the mapping from the failed location.
The new options, --start-offset and --max-length allows the user to
divide these type of map operations into shorter independent tasks.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Mark Kanda <mark.kanda@oracle.com>
Co-developed-by: Yoav Elnekave <yoav.elnekave@oracle.com>
Signed-off-by: Yoav Elnekave <yoav.elnekave@oracle.com>
Signed-off-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Message-Id: <20200513133629.18508-5-eyal.moscovici@oracle.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We currently have target-endian versions of these operations,
but no easy way to force a specific endianness. This can be
helpful if the target has endian-specific operations, or a mode
that swaps endianness.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Explain how to use analyze-migration.py, this may help.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200330174852.456148-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This adds support for nvdimm hotplug events through GED
and enables nvdimm for the arm/virt. Now Guests with ACPI
can have both cold and hot plug of nvdimms.
Hot removal functionality is not yet supported.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200421125934.14952-5-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties
-----BEGIN PGP SIGNATURE-----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=ad71
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties
# gpg: Signature made Thu 30 Apr 2020 16:51:45 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qemu-storage-daemon: Fix non-string --object properties
qom: Factor out user_creatable_add_dict()
nvme: introduce PMR support from NVMe 1.4 spec
qcow2: Forward ZERO_WRITE flag for full preallocation
iotests: Test committing to short backing file
iotests: Filter testfiles out in filter_img_info()
block: truncate: Don't make backing file data visible
file-posix: Support BDRV_REQ_ZERO_WRITE for truncate
raw-format: Support BDRV_REQ_ZERO_WRITE for truncate
qcow2: Support BDRV_REQ_ZERO_WRITE for truncate
block-backend: Add flags to blk_truncate()
block: Add flags to bdrv(_co)_truncate()
block: Add flags to BlockDriver.bdrv_co_truncate()
qemu-iotests: allow qcow2 external discarded clusters to contain stale data
qcow2: Add incompatibility note between backing files and raw external data files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Backing files and raw external data files are mutually exclusive.
The documentation of the raw external data bit (in autoclear_features)
already indicates that, but we should also mention it on the other
side.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200410121816.8334-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the documentation about the clock inputs and outputs in devices.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-6-damien.hedde@greensocs.com
[PMM: Editing pass for minor grammar, style and Sphinx
formatting fixes]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For QMP commands without arguments, gen_marshal() laboriously
generates a qmp_marshal_FOO() that copes with null @args. Turns
there's just one caller that passes null instead of an empty QDict.
Adjust that caller, and simplify gen_marshal().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-7-armbru@redhat.com>
Let's add some documentation for the Protected VM functionality.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200319131921.2367-16-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Linux kernel has dropped support for allowing 32-bit Arm systems
to host KVM guests (kernel commit 541ad0150ca4aa663a2, which just
landed upstream in the 5.7 merge window). Mark QEMU's support for
this configuration as deprecated, so that we can delete that support
code in 5.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Versions of Sphinx older than 1.6 can't build all of our documentation,
because they are too picky about the syntax of the argument to the
option:: directive; see Sphinx bugs #646, #3366:
https://github.com/sphinx-doc/sphinx/issues/646https://github.com/sphinx-doc/sphinx/issues/3366
Trying to build with a 1.4.x Sphinx fails with
docs/system/images.rst:4: SEVERE: Duplicate ID: "cmdoption-qcow2-arg-encrypt"
and a 1.5.x Sphinx fails with
docs/system/invocation.rst:544: WARNING: Malformed option description '[enable=]PATTERN', should look like "opt", "-opt
args", "--opt args", "/opt args" or "+opt args"
Update our needs_sphinx setting to indicate that we require at least
1.6. This will allow configure to fall back to "don't build the
docs" rather than causing the build to fail entirely, which is
probably what most users building on a host old enough to have such
an old Sphinx would want; if they do want the docs then they'll have
a useful indication of what they need to do (upgrade Sphinx!) rather
than a confusing error message.
In theory our distro support policy would suggest that we should
support building on the Sphinx shipped in those distros, but:
* EPEL7 has Sphinx 1.2.3 (which we've never supported!)
* Debian Stretch has Sphinx 1.4.8
Trying to get our docs to work with Sphinx 1.4 is not tractable
for the 5.0 release and I'm not sure it's worthwhile effort anyway;
at least with this change the build as a whole now succeeds.
Thanks to John Snow for doing the investigation and testing to
confirm what Sphinx versions fail in what ways and what distros
shipped what.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The kernel-doc Sphinx plugin and associated script currently emit
'c:type' directives for "struct foo" documentation.
Sphinx 3.0 warns about this:
/home/petmay01/linaro/qemu-from-laptop/qemu/docs/../include/exec/memory.h:3: WARNING: Type must be either just a name or a typedef-like declaration.
If just a name:
Error in declarator or parameters
Invalid C declaration: Expected identifier in nested name, got keyword: struct [error at 6]
struct MemoryListener
------^
If typedef-like declaration:
Error in declarator or parameters
Invalid C declaration: Expected identifier in nested name. [error at 21]
struct MemoryListener
---------------------^
because it wants us to use the new-in-3.0 'c:struct' instead.
Plumb the Sphinx version through to the kernel-doc script
and use it to select 'c:struct' for newer versions than 3.0.
Fixes: LP:1872113
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The documentation of our -s and -gdb options is quite old; in
particular it still claims that it will cause QEMU to stop and wait
for the gdb connection, when this has not been true for some time:
you also need to pass -S if you want to make QEMU not launch the
guest on startup.
Improve the documentation to mention this requirement in the
executable's --help output, the documentation of the -gdb option in
the manual, and in the "GDB usage" chapter.
Includes some minor tweaks to these paragraphs of documentation
since I was editing them anyway (such as dropping the description
of our gdb support as "primitive").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200403094014.9589-1-peter.maydell@linaro.org
Some of the constraints on operand sizes have been relaxed, so adjust the
documentation.
Deprecate atomic_mb_read and atomic_mb_set; it is not really possible to
use them correctly because they do not interoperate with sequentially-consistent
RMW operations.
Finally, extend the memory barrier pairing section to cover acquire and
release semantics in general, roughly based on the KVM Forum 2016 talk,
"<atomic.h> weapons".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Raise ConfigError rather than VersionRequirementError when we detect
that the Python being used by Sphinx is too old.
Currently the way we flag the Python version problem up to the user
causes Sphinx to print an unnecessary Python stack trace as well as
the information about the problem; in most versions of Sphinx this is
unavoidable.
The upstream Sphinx developers kindly added a feature to allow
conf.py to report errors to the user without the backtrace:
be608ca231
but the exception type they chose for this was ConfigError.
Switch to ConfigError, which won't make any difference with currently
deployed Sphinx versions, but will be prettier one day when the user
is using a Sphinx version with the new feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200313163616.30674-1-peter.maydell@linaro.org
The feature table is supposed to advertise the name of all feature
bits that we support; however, we forgot to update the table for
autoclear bits. While at it, move the table to read-only memory in
code, and tweak the qcow2 spec to name the second autoclear bit.
Update iotests that are affected by the longer header length.
Fixes: 88ddffae
Fixes: 93c24936
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324174233.1622067-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add new parameter description, also:
1. Remove unsociable space.
2. Nit picking: s/two/2 in report
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200320143216.423374-1-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Although qemu-ga has supported vsock since 2016 it was not documented on
the man page.
Also add the socket address representation to the qga --help output.
Fixes: 586ef5dee7
("qga: add vsock-listen method")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Create a subdirectory for s390x under docs/system/ and move the
existing vfio-ap documentation there.
Create an initial document describing s390x system emulation.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200318103940.1169-1-cohuck@redhat.com>
Update the copyright date to 2020 for the copyright strings which are
user-facing and represent overall copyright info for all of QEMU.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200316112006.19107-1-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----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=VWQB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-03-17' into staging
QAPI patches for 2020-03-17
# gpg: Signature made Tue 17 Mar 2020 20:50:54 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-03-17: (30 commits)
net: Track netdevs in NetClientState rather than QemuOpt
net: Complete qapi-fication of netdev_add
qmp: constify QmpCommand and list
qapi: Mark deprecated QMP parts with feature 'deprecated'
qapi: New special feature flag "deprecated"
qapi: Replace qmp_dispatch()'s TODO comment by an explanation
qapi: Simplify how qmp_dispatch() gets the request ID
qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP
qapi: Inline do_qmp_dispatch() into qmp_dispatch()
qapi: Add feature flags to struct members
qapi/schema: Call QAPIDoc.connect_member() in just one place
qapi/schema: Rename QAPISchemaObjectType{Variant,Variants}
qapi/schema: Reorder classes so related ones are together
qapi/schema: Change _make_features() to a take feature list
qapi/introspect: Factor out _make_tree()
qapi/introspect: Rename *qlit* to reduce confusion
qapi: Consistently put @features parameter right after @ifcond
qapi: Add feature flags to remaining definitions
qapi/schema: Clean up around QAPISchemaEntity.connect_doc()
tests/test-qmp-event: Check event is actually emitted
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----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=BPnR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
ppc patch queue 2020-03-17
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
pseries: Update SLOF firmware image
ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
ppc/spapr: Implement FWNMI System Reset delivery
target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
ppc/spapr: Allow FWNMI on TCG
ppc/spapr: Fix FWNMI machine check interrupt delivery
ppc/spapr: Add FWNMI System Reset state
ppc/spapr: Change FWNMI names
ppc/spapr: Fix FWNMI machine check failure handling
spapr: Rename DT functions to newer naming convention
spapr: Move creation of ibm,architecture-vec-5 property
spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
spapr/rtas: Reserve space for RTAS blob and log
pseries: Update SLOF firmware image
ppc/spapr: Move GPRs setup to one place
target/ppc: Fix rlwinm on ppc64
spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
hw/scsi/spapr_vscsi: Prevent buffer overflow
hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike regular feature flags, the new special feature flag
"deprecated" is recognized by the QAPI generator. For now, it's only
permitted with commands, events, and struct members. It will be put
to use shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-26-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Doc typo fixed]
In v4.1.0, we added feature flags just to struct types (commit
6a8c0b5102^..f3ed93d545), to satisfy an immediate need (commit
c9d4070991 "file-posix: Add dynamic-auto-read-only QAPI feature"). In
v4.2.0, we added them to commands (commit 23394b4c39 "qapi: Add
feature flags to commands") to satisfy another immediate need (commit
d76744e65e "qapi: Allow introspecting fix for savevm's cooperation
with blockdev").
Add them to the remaining definitions: enumeration types, union types,
alternate types, and events.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-13-armbru@redhat.com>
Commit 6a8c0b5102 "qapi: Add feature flags to struct types" neglected
to update section "Client JSON Protocol introspection", and commit
23394b4c39 "qapi: Add feature flags to commands" didn't either. Make
up for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-5-armbru@redhat.com>
Mention SchemaInfo variant member "allow-oob" defaults to false.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-4-armbru@redhat.com>
A number of deprecated QMP arguments and results were missed in commit
eb22aeca65 "docs: document deprecation policy & deprecated features in
appendix" (v2.10.0):
* Commit b33945cfff "block: Accept device model name for
blockdev-open/close-tray" (v2.8.0) deprecated blockdev-open-tray,
blockdev-close-tray argument @device.
* Commit fbe2d8163e "block: Accept device model name for eject"
(v2.8.0) deprecated eject argument @device.
* Commit 70e2cb3bd7 "block: Accept device model name for
blockdev-change-medium" (v2.8.0) deprecated blockdev-change-medium
argument @device.
* Commit 7a9877a026 "block: Accept device model name for
block_set_io_throttle" (v2.8.0) deprecated block_set_io_throttle
argument @device.
* Commit c01c214b69 "block: remove all encryption handling APIs"
(v2.10.0) deprecated query-named-block-nodes result
@encryption_key_missing and query-block result @inserted member
@encryption_key_missing.
* Commit c42e8742f5 "block: Use JSON null instead of "" to disable
backing file" (v2.10.0) deprecated blockdev-add empty string
argument @backing.
Since then, we missed a few more:
* Commit 3c605f4074 "commit: Add top-node/base-node options" (v3.1.0)
deprecated block-commit arguments @base and @top.
* Commit 4db6ceb0b5 "block/dirty-bitmap: add recording and busy
properties" (v4.0.0) deprecated query-named-block-nodes result
@dirty-bitmaps member @status, not just query-block.
Make up for all that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-2-armbru@redhat.com>
An ALTERNATIVE's value can only be a type name. Arrays are not
supported, yet. The text gets it right: "The form STRING is shorthand
for { 'type': STRING }." The grammar doesn't. Fix it.
Fixes: b6c37ebaaf
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200309142638.19988-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Server class POWER CPUs have a "compat" property, which was obsoleted
by commit 7843c0d60d and replaced by a "max-cpu-compat" property on the
pseries machine type. A hack was introduced so that passing "compat" to
-cpu would still produce the desired effect, for the sake of backward
compatibility : it strips the "compat" option from the CPU properties
and applies internally it to the pseries machine. The accessors of the
"compat" property were updated to do nothing but warn the user about the
deprecated status when doing something like:
$ qemu-system-ppc64 -global POWER9-family-powerpc64-cpu.compat=power9
qemu-system-ppc64: warning: CPU 'compat' property is deprecated and has no
effect; use max-cpu-compat machine property instead
This was merged during the QEMU 2.10 timeframe, a few weeks before we
formalized our deprecation process. As a consequence, the "compat"
property fell through the cracks and was never listed in the officialy
deprecated features.
We are now eight QEMU versions later, it is largely time to mention it
in qemu-deprecated.texi. Also, since -global XXX-powerpc64-cpu.compat=
has been emitting warnings since QEMU 2.10 and the usual way of setting
CPU properties is with -cpu, completely remove the "compat" property.
Keep the hack so that -cpu XXX,compat= stays functional some more time,
as required by our deprecation process.
The now empty powerpc_servercpu_properties[] list which was introduced
for "compat" and never had any other use is removed on the way. We can
re-add it in the future if the need for a server class POWER CPU specific
property arises again.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158274357799.140275.12263135811731647490.stgit@bahia.lan>
[dwg: Convert from .texi to .rst to match upstream change]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Add the '-noTSX' variants for CascadeLake and SkyLake.
- Document the three MSR bits: 'mds-no', 'taa-no', and 'tsx-ctrl'
Two confusing things about 'mds-no' (and the first point applies to
the other two MSRs too):
(1) The 'mds-no' bit will _not_ show up in the guest's /proc/cpuinfo.
Rather it is used to fill in the guest's sysfs:
/sys/devices/system/cpu/vulnerabilities/mds:Not affected
Paolo confirmed on IRC as such.
(2) There are _three_ variants[+] of CascadeLake CPUs, with different
stepping levels: 5, 6, and 7. To quote wikichip.org[*]:
"note that while steppings 6 & 7 are fully mitigated, earlier
stepping 5 is not protected against MSBDS, MLPDS, nor MDSUM"
The above is also indicated in the Intel's document[+], as
indicated by "No" under the three columns of MFBDS, MSBDS, and
MLPDS.
I've expressed this in the docs without belabouring the details.
[+] https://software.intel.com/security-software-guidance/insights/processors-affected-microarchitectural-data-sampling
[*] https://en.wikichip.org/wiki/intel/microarchitectures/cascade_lake#Key_changes_from_Skylake
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20200225165618.6571-3-kchamart@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following command (then manual analysis, without modifying
structures only having a single flexible array member, such
QEDTable in block/qed.h):
git grep -F '[0];'
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Xunlong Orange Pi PC machine is a functional ARM machine
based on the Allwinner H3 System-on-Chip. It supports mainline
Linux, U-Boot, NetBSD and is covered by acceptance tests.
This commit adds a documentation text file with a description
of the machine and instructions for the user.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-19-nieklinnenbank@gmail.com
[PMM: moved file into docs/system/arm to match the reorg
of the arm target part of the docs; tweaked heading to
match other boards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The company 'Arm' went through a rebranding some years back
involving a recapitalization from 'ARM' to 'Arm'. As a result
our documentation is a bit inconsistent between the two forms.
It's not worth trying to update everywhere in QEMU, but it's
easy enough to make docs/ consistent.
Note that "ARMv8" and similar architecture names, and
older CPU names like "ARM926" still retain all-caps.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-6-peter.maydell@linaro.org
Now we have somewhere to put arm-specific rst documentation,
we can move arm-cpu-features.rst from the docs/ top level
directory into docs/system/arm/.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-5-peter.maydell@linaro.org
Now we've moved the various bits of per-board documentation into
their own files, the top level document is a little bare. Add
some introductory information, including a note that many
of the board models we support are currently undocumented.
(Most sections of this new text were originally written by me
for the wiki page https://wiki.qemu.org/Documentation/Platforms/ARM)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-4-peter.maydell@linaro.org
Currently the documentation for Arm system emulator targets is in a
single target-arm.rst. This describes only some of the boards and
often in a fairly abbreviated fashion. Restructure it so that each
board has its own documentation file in the docs/system/arm/
subdirectory.
This will hopefully encourage us to write board documentation that
describes the board in detail, rather than a few brief paragraphs
in a single long page. The table of contents should also help users
to find the board they care about faster.
Once the structure is in place we'll be able to move microvm.rst
from the top-level docs/ directory.
All the text from the old page is retained, except for the final
paragraph ("A Linux 2.6 test image is available on the QEMU web site.
More information is available in the QEMU mailing-list archive."),
which is deleted. The git history shows this was originally added
in reference to the integratorcp board (at that time the only
Arm board that was supported), and has subsequently gradually been
further and further separated from the integratorcp documentation
by the insertion of other board documentation sections. It's
extremely out of date and no longer accurate, since AFAICT there
isn't an integratorcp kernel on the website any more; so better
deleted than retained.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-3-peter.maydell@linaro.org
The Texinfo version of the tracing options documentation has now
been deleted, so we can remove the now-redundant comment at the top
of the rST version that was reminding us that the two should be
kept in sync.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-8-peter.maydell@linaro.org
Now that qemu-doc.html is no longer present, the ordering of manuals
within the top-level index page looks a bit odd. Reshuffle so that
the manuals the user is most likely to be interested in are at the
top of the list, and the reference material is at the bottom.
Similarly, we reorder the index.rst file used as the base of
the "all manuals in one" documentation for readthedocs.
The new order is:
* system
* user
* tools
* interop
* specs
* QMP reference (if present)
* Guest agent protocol reference (if present)
* devel (if present)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-7-peter.maydell@linaro.org
Now that none of our input .hx files have STEXI/ETEXI blocks,
we can remove the code in the Sphinx hxtool extension that
supported parsing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-5-peter.maydell@linaro.org
It's been deprecated since QEMU v3.1.0. Time to finally remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205104109.18680-1-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reworked Thomas's deprecated.texi to the rst
Mapping object-add to the command line as is doesn't result in nice
syntax because of the nesting introduced with 'props'. This becomes
nicer and more consistent with device_add and netdev_add when we accept
properties for the object on the top level instead.
'props' is still accepted after this patch, but marked as deprecated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can now delete the old .texi files, which we have been keeping in
the tree as a parallel set of documentation to the new rST sources.
The only remaining use of Texinfo is the autogenerated manuals
and HTML documents created from the QAPI JSON doc comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-33-peter.maydell@linaro.org
Stop building the old texinfo qemu-doc; all its contents are
now available in the Sphinx-generated manuals and manpages.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-32-peter.maydell@linaro.org
Generate the qemu.1 manpage using Sphinx; we do this with a new
top-level rst source file which is just the skeleton of the manpage
and which includes .rst.inc fragments where it needs to incorporate
sections from the larger HTML manuals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-30-peter.maydell@linaro.org
Sphinx doesn't have very good facilities for marking chunks
of documentation as "put this in the manpage only". So instead
we move the parts we want to put into both the HTML manuals
and the manpage into their own .rst.inc files, which we can
include from both the main manual rst files and a new toplevel
rst file that will be the skeleton of the qemu.1 manpage.
In this commit, just split out the parts of the documentation
that go in the manpage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-29-peter.maydell@linaro.org
This commit contains hand-written fixes for some issues with the
autogenerated rST fragments in qemu-options.hx:
* Sphinx complains about the UTF-8 art table in the documentation of
the -drive option. Replace it with a proper rST format table.
* rST does not like definition list entries with no actual
definition, but it is possible to work around this by putting a
single escaped literal space as the definition line.
* The "-g widthxheight" option documentation suffers particularly
badly from losing the distinction between italics and fixed-width
as a result of the auto conversion, so put it back in again.
* The script missed some places that use the |qemu_system| etc
macros and need to be marked up as parsed-literal blocks.
* The script autogenerated an expanded out version of the
contents of qemu-option-trace.texi; replace it with an
qemu-option-trace.rst.inc include.
This is sufficient that we can enable inclusion of the
option documentation from invocation.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-28-peter.maydell@linaro.org
The SPARC and PPC targets currently have a fragment of target-specific
information about the -g and -prom options which would be better placed
as part of the general documentation of those options in qemu-options.hx.
Move the relevant information to those locations.
SPARC also has a bit of text about the -M option which is out of
date and provides no useful information over the generic documentation
of that option, so just delete it.
The motivation here is again to avoid having to awkwardly include
this text into the rST version of the qemu.1 manpage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-25-peter.maydell@linaro.org
Currently the per-target documentation for those targets that
implement semihosting includes a bit of text that goes into both the
manual and the manpage about options specific to the target. This
text is redundant with the earlier generic option description of the
semihosting option produced from qemu-options.hx. To avoid having
to create a lot of stub include files to include into the rST
generated qemu.1 manpage, roll target-specific bits of information
into the qemu-options.hx text, so the user doesn't have to look
in two places for this information.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-24-peter.maydell@linaro.org
In hxtool files, section headings defined with the DEFHEADING
and ARCHHEADING macros have a trailing ':'
DEFHEADING(Standard options:)
This is for the benefit of the --help output. For consistency
with the rest of the rST documentation, strip any trailing ':'
when we construct headings with the Sphinx hxtool extension.
This makes the table of contents look neater.
This only affects generation of documentation from qemu-options.hx,
which we will start doing in a later commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-23-peter.maydell@linaro.org
Add the rST versions of the documentation fragments. Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.
Note that most of the SRST fragments are 2-space indented so that the
'info foo' documentation entries appear as a sublist under the 'info'
entry in the top level list.
Again, all we need to do to put the documentation in the Sphinx manual
is a one-line hxtool-doc invocation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-22-peter.maydell@linaro.org
Add the rST versions of the documentation fragments. Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.
Since the only consumer of the hmp-commands hxtool documentation
is the HTML manual, all we need to do for the monitor command
documentation to appear in the Sphinx system manual is add the
one line that invokes the hxtool extension on the .hx file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-21-peter.maydell@linaro.org
Apart from targets.rst, which was written by hand, this is an automated
conversion obtained with the following command:
makeinfo --force -o - --docbook \
-D 'qemu_system_x86 QEMU_SYSTEM_X86_MACRO' \
-D 'qemu_system QEMU_SYSTEM_MACRO' \
$texi | pandoc -f docbook -t rst+smart | perl -e '
$/=undef;
$_ = <>;
s/^- − /- /gm;
s/QEMU_SYSTEM_MACRO/|qemu_system|/g;
s/QEMU_SYSTEM_X86_MACRO/|qemu_system_x86|/g;
s/(?=::\n\n +\|qemu)/.. parsed-literal/g;
s/:\n\n::$/::/gm;
print' > $rst
In addition, the following changes were made manually:
- target-i386.rst and target-mips.rst: replace CPU model documentation with
an include directive
- monitor.rst: replace the command section with a comment
- images.rst: add toctree
- target-arm.rst: Replace use of :math: (which Sphinx complains
about) with :sup:, and hide it behind |I2C| and |I2C| substitutions.
Content that is not @included remains exclusive to qemu-doc.texi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-20-peter.maydell@linaro.org
Message-id: 20200226113034.6741-19-pbonzini@redhat.com
[PMM: Fixed target-arm.rst use of :math:; remove out of date
note about images.rst from commit message; fixed expansion
of |qemu_system_x86|; use parsed-literal in invocation.rst
when we want to use |qemu_system_x86|; fix incorrect subsection
level for "OS requirements" in target-i386.rst; fix incorrect
syntax for making links to other sections of the manual]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We put the whole of this document into the system manual, though
technically a few parts of it apply to qemu-img or qemu-nbd which are
otherwise documented in tools/.
We only make formatting fixes, except for one use of 'appendix' which
we change to 'section' because this isn't an appendix in the Sphinx
manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-19-peter.maydell@linaro.org
Message-id: 20200226113034.6741-18-pbonzini@redhat.com
Fix one typo in the process and format more option and
command names as literal text, but make no significant
changes to the content.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-18-peter.maydell@linaro.org
Message-id: 20200226113034.6741-17-pbonzini@redhat.com
security.texi is included from qemu-doc.texi but is not used
in the qemu.1 manpage. So we can do a straightforward conversion
of the contents, which go into the system manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-17-peter.maydell@linaro.org
Message-id: 20200226113034.6741-16-pbonzini@redhat.com
This doc was originally written by Daniel P. Berrangé
<berrange@redhat.com>, introduced via commit[1]: 2544e9e4aa (docs: add
guidance on configuring CPU models for x86, 2018-06-27).
In this patch:
- 1-1 conversion of Texinfo to rST, besides a couple of minor
tweaks that are too trivial to mention. (Thanks to Stephen
Finucane on IRC for the suggestion to use rST "definition lists"
instead of bullets in some places.)
Further modifications will be done via a separate patch.
- rST and related infra changes: manual page generation, Makefile
fixes, clean up references to qemu-cpu-models.texi, update year in
the copyright notice, etc.
[1] https://git.qemu.org/?p=qemu.git;a=commit;h=2544e9e4aa
As part of the conversion, we use a more generic 'author' attribution
for the manpage than we previously had, as agreed with the original
author Dan Berrange.
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-16-peter.maydell@linaro.org
Message-id: 20200226113034.6741-15-pbonzini@redhat.com
[Move macros to defs.rst.inc, split in x86 and MIPS parts,
make qemu-cpu-models.rst a standalone document. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: Move defs.rst.inc setup to its own commit;
fix minor issues with MAINTAINERS file updates;
drop copyright date change; keep capitalization of
"QEMU Project developers" consistent with other uses;
minor Makefile fixups]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than accumulating generally useful rST substitution
definitions in individual rST files, create a defs.rst.inc where we
can define these. To start with it has the |qemu_system| definition
from qemu-block-drivers.rst.
Add a comment noting a pitfall where putting literal markup in the
definition of |qemu_system| makes it misrender manpage output; this
means the point-of-use must handle the literal markup (which is
almost always done by having it inside a parsed-literal block).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-15-peter.maydell@linaro.org
This removes the "only" directives, and lets us use the conventional
"DESCRIPTION" section in the manpage.
This temporarily drops the qemu-block-drivers documentation
from the system manual, but it will be put back (in the
right place in the toctree) in a later commit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-14-peter.maydell@linaro.org
Message-id: 20200226113034.6741-14-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Added commit message note about temporarily losing
qemu-block-drivers from the system manual]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These indices are not well-maintained, and pandoc also chokes on the
directives. Just nuke them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-13-peter.maydell@linaro.org
Message-id: 20200226113034.6741-13-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since qemu-doc.texi is mostly including files from docs/system,
move the existing include files there for consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-12-peter.maydell@linaro.org
Message-id: 20200226113034.6741-12-pbonzini@redhat.com
[PMM: update MAINTAINERS line for qemu-option-trace.texi]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only remaining content in qemu-tech.texi is a few paragraphs
about managed start up options. Move them in the main section
about full system emulation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-11-peter.maydell@linaro.org
Message-id: 20200226113034.6741-11-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-9-peter.maydell@linaro.org
Message-id: 20200226113034.6741-9-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the section on PC peripherals together with other targets.
While some x86-specific information remains in the main system
emulation chapter, it can be tackled more easily a section at a
time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-7-peter.maydell@linaro.org
Message-id: 20200226113034.6741-7-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to facilitate the reorganization of qemu-doc.texi content,
as well as the conversion to rST/Sphinx, split it in multiple .texi
files that are included from docs/system.
The "other devices" section is renamed to ivshmem and placed last.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-6-peter.maydell@linaro.org
Message-id: 20200226113034.6741-6-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MIPS CPU models end up in the middle of the PC documentation. Move
them to a separate file so that they can be placed in the right section.
The man page still includes both x86 and MIPS content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-5-peter.maydell@linaro.org
Message-id: 20200226113034.6741-5-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The final addition to the set of QEMU manuals is the user-mode emulation
manual, which right now is included in qemu-doc.texi. Extract it and
convert it to rST, so that qemu-doc.texi covers only full system emulation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-2-peter.maydell@linaro.org
Message-id: 20200226113034.6741-2-pbonzini@redhat.com
[PMM: Fix makefile conflicts; add user manual to
index.rst and index.html.in; don't specify empty man_pages
list; fixed a few comments to say 'user' rather than 'system']
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the documentation with recent changes related to the
sysbus TPM_TIS device addition and add the command line
to be used with arm VIRT.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200305165149.618-8-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Document the qemu command-line and qmp commands for continuous replication
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit 3a61c8db9d introduced CPHP_GET_CPU_ID_CMD command but
did not sufficiently describe it. Fix it by adding missing command
documentation.
Fixes: 3a61c8db9d ("acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1580306781-228371-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For good reason, vhost-user is currently built asynchronously, that
way better performance can be obtained. However, for certain use
cases such as simulation, this is problematic.
Consider an event-based simulation in which both the device and CPU
have scheduled according to a simulation "calendar". Now, consider
the CPU sending I/O to the device, over a vring in the vhost-user
protocol. In this case, the CPU must wait for the vring interrupt
to have been processed by the device, so that the device is able to
put an entry onto the simulation calendar to obtain time to handle
the interrupt. Note that this doesn't mean the I/O is actually done
at this time, it just means that the handling of it is scheduled
before the CPU can continue running.
This cannot be done with the asynchronous eventfd based vring kick
and call design.
Extend the protocol slightly, so that a message can be used for kick
and call instead, if VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS is
negotiated. This in itself doesn't guarantee synchronisation, but both
sides can also negotiate VHOST_USER_PROTOCOL_F_REPLY_ACK and thus get
a reply to this message by setting the need_reply flag, and ensure
synchronisation this way.
To really use it in both directions, VHOST_USER_PROTOCOL_F_SLAVE_REQ
is also needed.
Since it is used for simulation purposes and too many messages on
the socket can lock up the virtual machine, document that this should
only be used together with the mentioned features.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20200123081708.7817-6-johannes@sipsolutions.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move to system/, as this is mostly about configuring vfio-ap.
Message-Id: <20200213162942.14177-3-cohuck@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While at it, also fix the numbering in 'What QEMU does'.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200213162942.14177-2-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
I forgot to document the lifetime of handles in the developer
documentation. Do so now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-11-alex.bennee@linaro.org>
Move the following tools documentation files to the new tools manual:
docs/interop/qemu-img.rst
docs/interop/qemu-nbd.rst
docs/interop/virtfs-proxy-helper.rst
docs/interop/qemu-trace-stap.rst
docs/interop/virtiofsd.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200217155415.30949-4-peter.maydell@linaro.org
The qemu-option-trace.rst.inc file contains a rST documentation
fragment which describes trace options common to qemu-nbd and
qemu-img. We put this file into interop/, but we'd like to move the
qemu-nbd and qemu-img files into the tools/ manual. We could move
the .rst.inc file along with them, but we're eventually going to want
to use it for the main QEMU binary options documentation too, and
that will be in system/. So move qemu-option-trace.rst.inc to the
top-level docs/ directory, where all these files can include it via
.. include:: ../qemu-option-trace.rst.inc
This does have the slight downside that we now need to explicitly
tell Make which manuals use this file rather than relying on
a wildcard for all .rst.inc in the manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200217155415.30949-3-peter.maydell@linaro.org
Some of the documentation for QEMU "tools" which are standalone
binaries like qemu-img is an awkward fit in our current 5-manual
split. We've put it into "interop", but they're not really
about interoperability.
Create a new top level manual "tools" which will be a better
home for this documentation. This commit creates an empty
initial manual; we will move the relevant documentation
files in a subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200217155415.30949-2-peter.maydell@linaro.org
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-23-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In many cases the target of a convert operation is a newly provisioned
target that the user knows is blank (reads as zero). In this situation
there is no requirement for qemu-img to wastefully zero out the entire
device.
Add a new option, --target-is-zero, allowing the user to indicate that
an existing target device will return zeros for all reads.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200205110248.2009589-2-david.edmondson@oracle.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch adds a new additional field to the qcow2 header: compression_type,
which specifies compression type. If field is absent or zero, default
compression type is set: ZLIB, which corresponds to current behavior.
New compression type (ZSTD) is to be added in further commit.
Suggested-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200131142219.3264-3-vsementsov@virtuozzo.com>
[mreitz: s/Bits 3-63: Reserved/Bits 4-63: Reserved/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make it more obvious how to add new fields to the version 3 header and
how to interpret them.
The specification is adjusted so that for new defined optional fields:
1. Software may support some of these optional fields and ignore the
others, which means that features may be backported to downstream
Qemu independently.
2. If we want to add incompatible field (or a field, for which some of
its values would be incompatible), it must be accompanied by
incompatible feature bit.
Also the concept of "default is zero" is clarified, as it's strange to
say that the value of the field is assumed to be zero for the software
version which don't know about the field at all and don't know how to
treat it be it zero or not.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200131142219.3264-2-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
[mreitz: s/some its/some of its/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently configure's has_sphinx_build() check simply runs a dummy
sphinx-build and either passes or fails. This means that "no
sphinx-build at all" and "sphinx-build exists but is too old" are
both reported the same way.
Further, we want to assume that all the Python we write is running
with at least Python 3.5; configure checks that for our scripts, but
Sphinx extensions run with whatever Python version sphinx-build
itself is using.
Add a check to our conf.py which makes sphinx-build fail if it would
be running our extensions with an old Python, and handle this
in configure so we can report failure helpfully to the user.
This will mean that configure --enable-docs will fail like this
if the sphinx-build provided is not suitable:
Warning: sphinx-build exists but it is either too old or uses too old a Python version
ERROR: User requested feature docs
configure was not able to find it.
Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx
(As usual, the default is to simply not build the docs, as we would
if sphinx-build wasn't present at all.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-3-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Document the virtiofsd(1) program and its command-line options. This
man page is a rST conversion of the original texi documentation that I
wrote.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bold text sounds like 'knock knock'. Only bolding the
second 'not' makes it easier to read.
Fixes: dea101a1ae
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200206225148.23923-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The '-i AIO' option was accidentally placed after '-n' and '-t'. Move it
after '--flush-interval'.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200205163008.204493-1-jusual@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The option was deprecated in 4.0.0 (commit 0ae2d546); it's now been
long enough with no complaints to follow through with that process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200123164650.1741798-3-eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qtests have recently been moved to a separate subdirectory, so
the paths that are mentioned in the documentation have to be adjusted
accordingly. And some of the iotests are now always run as part of
"make check", so this information has to be adjusted here, too.
Message-Id: <20200122134511.23806-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtfs-proxy-helper documentation is currently in
fsdev/qemu-trace-stap.texi in Texinfo format, which we
present to the user as:
* a virtfs-proxy-helper manpage
* but not (unusually for QEMU) part of the HTML docs
Convert the documentation to rST format that lives in
the docs/ subdirectory, and present it to the user as:
* a virtfs-proxy-helper manpage
* part of the interop/ Sphinx manual
There are minor formatting changes to suit Sphinx, but no
content changes. In particular I've split the -u and -g
options into each having their own description text.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Greg Kurz <groug@kaod.org>
Message-id: 20200124162606.8787-9-peter.maydell@linaro.org
The qemu-trace-stap documentation is currently in
scripts/qemu-trace-stap.texi in Texinfo format, which we
present to the user as:
* a qemu-trace-stap manpage
* but not (unusually for QEMU) part of the HTML docs
Convert the documentation to rST format that lives in
the docs/ subdirectory, and present it to the user as:
* a qemu-trace-stap manpage
* part of the interop/ Sphinx manual
There are minor formatting changes to suit Sphinx, but no
content changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-8-peter.maydell@linaro.org
The qemu-img documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-img manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-img manpage
* part of the interop/ Sphinx manual
The qemu-img rST document uses the new hxtool extension
to handle pulling rST fragments out of qemu-img-cmds.hx.
The documentation of the various options and commands is rather
muddled, with some options being described inside the relevant
command description and some in a more general section near the start
of the manual. All the command synopses are replicated in the .hx
file and then again in the manual. A lot of text is also duplicated
in the qemu-img.c code for the help text. I have not attempted to
deal with any of this, but have simply transposed the existing
structure into rST.
As usual, there are some minor formatting changes but no
textual changes, except that as with one or two other conversions
I have dropped the 'see also' section since it's not very
informative and looks odd in the HTML.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-6-peter.maydell@linaro.org
Some of our documentation includes sections which are created
by assembling fragments of texinfo from a .hx source file into
a .texi file, which is then included from qemu-doc.texi or
qemu-img.texi.
For Sphinx, rather than creating a file to include, the most natural
way to handle this is to have a small custom Sphinx extension which
reads the .hx file and process it. So instead of:
* makefile produces foo.texi from foo.hx
* qemu-doc.texi says '@include foo.texi'
we have:
* qemu-doc.rst says 'hxtool-doc:: foo.hx'
* the Sphinx extension for hxtool has code that runs to handle that
Sphinx directive which reads the .hx file and emits the appropriate
documentation contents
This is pretty much the same way the kerneldoc extension works right
now. It also has the advantage that it should work for third-party
services like readthedocs that expect to build the docs directly with
sphinx rather than by invoking our makefiles.
In this commit we implement the hxtool extension.
Note that syntax errors in the rST fragments will be correctly
reported to the user with the filename and line number within the
hx file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-4-peter.maydell@linaro.org
Implement support for TPM on ppc64 by implementing the vTPM CRQ interface
as a frontend. It can use the tpm_emulator driver backend with the external
swtpm.
The Linux vTPM driver for ppc64 works with this emulation.
This TPM emulator also handles the TPM 2 case.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-4-stefanb@linux.ibm.com>
[dwg: Use device_class_set_props(), tweak Kconfig]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of recommending checking the TRACE_FOO_ENABLED macro to
skip expensive computations needed only for tracing, recommend
only using trace_event_get_state_backends(). This works for both
compile-time and run-time disabling of events, and has no extra
performance impact if the event is compile-time disabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200120151142.18954-2-peter.maydell@linaro.org
Message-Id: <20200120151142.18954-2-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
kvm-no-adjvtime is a KVM specific CPU property and a first of its
kind. To accommodate it we also add kvm_arm_add_vcpu_properties()
and a KVM specific CPU properties description to the CPU features
document.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-7-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle bit 1 write, then post event to monitor.
Suggested by Paolo, declear a new event, using GUEST_PANICKED could
cause upper layers to react by shutting down or rebooting the guest.
In advance for extention, add GuestPanicInformation in event message.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add bit 1 for pvpanic. This bit means that guest hits a panic, but
guest wants to handle error by itself. Typical case: Linux guest runs
kdump in panic. It will help us to separate the abnormal reboot from
normal operation.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-2-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
-----BEGIN PGP SIGNATURE-----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=UUVN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b' into staging
virtiofsd first pull v2
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
# gpg: Signature made Thu 23 Jan 2020 16:45:18 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b: (108 commits)
virtiofsd: add some options to the help message
virtiofsd: stop all queue threads on exit in virtio_loop()
virtiofsd/passthrough_ll: Pass errno to fuse_reply_err()
virtiofsd: Convert lo_destroy to take the lo->mutex lock itself
virtiofsd: add --thread-pool-size=NUM option
virtiofsd: fix lo_destroy() resource leaks
virtiofsd: prevent FUSE_INIT/FUSE_DESTROY races
virtiofsd: process requests in a thread pool
virtiofsd: use fuse_buf_writev to replace fuse_buf_write for better performance
virtiofsd: add definition of fuse_buf_writev()
virtiofsd: passthrough_ll: Use cache_readdir for directory open
virtiofsd: Fix data corruption with O_APPEND write in writeback mode
virtiofsd: Reset O_DIRECT flag during file open
virtiofsd: convert more fprintf and perror to use fuse log infra
virtiofsd: do not always set FUSE_FLOCK_LOCKS
virtiofsd: introduce inode refcount to prevent use-after-free
virtiofsd: passthrough_ll: fix refcounting on remove/rename
libvhost-user: Fix some memtable remap cases
virtiofsd: rename inode->refcount to inode->nlookup
virtiofsd: prevent races with lo_dirp_put()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the --print-capabilities option as per vhost-user.rst "Backend
programs conventions". Currently there are no advertised features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The qemu-block-drivers documentation is currently in
docs/qemu-block-drivers.texi in Texinfo format, which we present
to the user as:
* a qemu-block-drivers manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-block-drivers manpage
* part of the system/ Sphinx manual
This follows the same pattern we've done for qemu-ga and qemu-nbd.
We have to drop a cross-reference from the documentation of the
-cdrom option back to the qemu-block-drivers documentation, since
they're no longer within the same texinfo document.
As noted in a comment, the manpage output is slightly compromised
due to limitations in Sphinx. In an ideal world, the HTML output
would have the various headings like 'Disk image file formats'
as top-level section headings (which then appear in the overall
system manual's table-of-contents), and it would not have the
section headings which make sense only for the manpage like
'synopsis', 'description', and 'see also'. Unfortunately, the
mechanism Sphinx provides for restricting pieces of documentation
is limited to the point of being flawed: the 'only::' directive
is implemented as a filter that is applied at a very late stage
in the document processing pipeline, rather than as an early
equivalent of an #ifdef. This means that Sphinx's process of
identifying which section heading markup styles are which levels
of heading gets confused if the 'only::' directive contains
section headings which would affect the heading-level of a
later heading. I have opted to prioritise making the HTML format
look better, with the compromise being that in the manpage
the 'Disk image file formats' &c headings are top-level headings
rather than being sub-headings under the traditional 'Description'
top-level section title.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-4-peter.maydell@linaro.org
We want a user-facing manual which contains system emulation
documentation. Create an empty one which we can populate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-3-peter.maydell@linaro.org
The qemu-nbd documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-nbd manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-nbd manpage
* part of the interop/ Sphinx manual
This follows the same pattern as commit 27a296fce9 did for the
qemu-ga manpage.
All the content of the old manpage is retained, except that I have
dropped the "This is free software; see the source for copying
conditions. There is NO warranty..." text that was in the old AUTHOR
section; Sphinx's manpage builder doesn't expect that much text in
the AUTHOR section, and since none of our other manpages have it it
seems easiest to delete it rather than try to figure out where else
in the manpage to put it.
The only other textual change is that I have had to give the
--nocache option its own description ("Equivalent to --cache=none")
because Sphinx doesn't have an equivalent of using item/itemx
to share a description between two options.
Some minor aspects of the formatting have changed, to suit what is
easiest for Sphinx to output. (The most notable is that Sphinx
option section option syntax doesn't support '--option foo=bar'
with bar underlined rather than bold, so we have to switch to
'--option foo=BAR' instead.)
The contents of qemu-option-trace.texi are now duplicated in
docs/interop/qemu-option-trace.rst.inc, until such time as we complete
the conversion of the other files which use it; since it has had only
3 changes in 3 years, this shouldn't be too awkward a burden.
(We use .rst.inc because if this file fragment has a .rst extension
then Sphinx complains about not seeing it in a toctree.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-2-peter.maydell@linaro.org
Firmware can enumerate present at boot APs by broadcasting wakeup IPI,
so that woken up secondary CPUs could register them-selves.
However in CPU hotplug case, it would need to know architecture
specific CPU IDs for possible and hotplugged CPUs so it could
prepare environment for and wake hotplugged AP.
Reuse and extend existing CPU hotplug interface to return architecture
specific ID for currently selected CPU in 2 registers:
- lower 32 bits in ACPI_CPU_CMD_DATA_OFFSET_RW
- upper 32 bits in ACPI_CPU_CMD_DATA2_OFFSET_R
On x86, firmware will use CPHP_GET_CPU_ID_CMD for fetching the APIC ID
when handling hotplug SMI.
Later, CPHP_GET_CPU_ID_CMD will be used on ARM to retrieve MPIDR,
which serves the similar to APIC ID purpose.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575896942-331151-10-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Document work-flows for
* enabling/detecting modern CPU hotplug interface
* finding a CPU with pending 'insert/remove' event
* enumerating present and possible CPUs
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575896942-331151-9-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
No functional change in practice, patch only aims to properly
document (in spec and code) intended usage of the reserved space.
The new field is to be used for 2 purposes:
- detection of modern CPU hotplug interface using
CPHP_GET_NEXT_CPU_WITH_EVENT_CMD command.
procedure will be described in follow up patch:
"acpi: cpuhp: spec: add typical usecases"
- for returning upper 32 bits of architecture specific CPU ID,
for new CPHP_GET_CPU_ID_CMD command added by follow up patch:
"acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command"
Change is backward compatible with 4.2 and older machines, as field was
unconditionally reserved and always returned 0x0 if modern CPU hotplug
interface was enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575896942-331151-8-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Write section of 'Command data' register should describe what happens
when it's written into. Correct description in case the last stored
'Command field' value is equal to 0, to reflect that currently it's not
supported.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1575896942-331151-7-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Correct returned value description in case 'Command field' == 0x0,
it's not PXM but CPU selector value with pending event
In addition describe 0 blanket value in case of not supported
'Command field' value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1575896942-331151-6-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Move reserved registers to the top of the section, so reader would be
aware of effects when reading registers description.
* State registers endianness explicitly at the beginning of the section
* Describe registers behavior in case of 'CPU selector' register contains
value that doesn't point to a possible CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1575896942-331151-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This finishes the new interface began with the previous patch.
Document the interface and deprecate MMU_MODE<N>_SUFFIX.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no uses of the *_cmmu names other than the bare wrapping
within the *_code inlines. Therefore rename the functions so we
can drop the inlines.
Use abi_ptr instead of target_ulong in preparation for user-only;
the two types are identical for softmmu.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
* Build index.html for docs
-----BEGIN PGP SIGNATURE-----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=CchM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-01-12' into staging
* Move qtests into a separate directory
* Build index.html for docs
# gpg: Signature made Sun 12 Jan 2020 11:21:41 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-01-12:
docs: build an index page for the HTML docs
tests/libqos: Move the libqos files under tests/qtest/
tests/Makefile: Move qtest-related settings to a separate Makefile.include
test: Move qtests to a separate directory
tests/Makefile: Separate unit test dependencies from qtest dependencies
tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables
tests/ptimer: Remove unnecessary inclusion of libqtest.h
tests/Makefile: test-char does not need libqtest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no index.html start page for the QEMU HTML documentation. An
index page is needed so that documentation can be browsed easily on the
web.
This patch adds an index.html.in template file where the QEMU version
number is expanded. It is written in HTML instead of using the existing
sphinx (rST) and texi documentation generators because they are
heavyweight and would make this harder.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191219135620.1626608-1-stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl4TaMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpvzgH/2LyDAzCa9h93ikSJjmyUk5FUaqve38daEb3
S3JYjwKxQx7u1ydooKhvBQnBCZ2i3S+k62gfYyKB+nBv8xvjs0Eg5D1YJ5E8hciy
lf5OFGWWtX2iPDjZwQwT13kiJe0o3JRGxJJ6XqTEG+1EYOp7cky/FEv4PD030b9m
I2wROZ/Am+onB9YJX8c0Vv1CG+AryuJNXnvwQzTXEjj4U7bEYUyJwVZaCRyAdWQ3
uYXIZN9VwjVX6BFvy9ZAJbEsUVJvOM1/aQaDqcrLz+VlzRT7bRkKHi2G3vakrm1I
r5OpgyLo84132awCncbSykKDH5o8WaxLaJBjGmuBfasMz9wPzAg=
=uL1o
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: fixes, features
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (32 commits)
intel_iommu: add present bit check for pasid table entries
intel_iommu: a fix to vtd_find_as_from_bus_num()
virtio-net: delete also control queue when TX/RX deleted
virtio: reset region cache when on queue deletion
virtio-mmio: update queue size on guest write
tests: add virtio-scsi and virtio-blk seg_max_adjust test
virtio: make seg_max virtqueue size dependent
hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35
vhost-user-scsi: reset the device if supported
vhost-user: add VHOST_USER_RESET_DEVICE to reset devices
hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument
hw/pci/pci_host: Remove redundant PCI_DPRINTF()
virtio-mmio: Clear v2 transport state on soft reset
ACPI: add expected files for HMAT tests (acpihmat)
tests/bios-tables-test: add test cases for ACPI HMAT
tests/numa: Add case for QMP build HMAT
hmat acpi: Build Memory Side Cache Information Structure(s)
hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)
hmat acpi: Build Memory Proximity Domain Attributes Structure(s)
numa: Extend CLI to provide memory side cache information
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Record/replay feature of icount allows deterministic running of execution
scenarios. Some CPUs and peripheral devices read random numbers from
external sources making deterministic execution impossible.
This patch adds recording and replaying of random read operations
into guest-random module, which is used by the virtual hardware.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <157675984852.14505.15709141760677102489.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When instantiated, this object will connect to the given D-Bus bus
"addr". During migration, it will take/restore the data from
org.qemu.VMState1 instances. See documentation for details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a VHOST_USER_RESET_DEVICE message which will reset the vhost user
backend. Disabling all rings, and resetting all internal state, ready
for the backend to be reinitialized.
A backend has to report it supports this features with the
VHOST_USER_PROTOCOL_F_RESET_DEVICE protocol feature bit. If it does
so, the new message is used instead of sending a RESET_OWNER which has
had inconsistent implementations.
Signed-off-by: David Vrabel <david.vrabel@nutanix.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1572385083-5254-2-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch is to add standard commands defined in docs/interop/vhost-user.rst
For vhost-user-* program
Signed-off-by: Micky Yun Chan (michiboo) <chanmickyyun@gmail.com>
Message-Id: <20191209015331.5455-1-chanmickyyun@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The .rst files outside docs/{devel,interop,specs} aren't built yet and
therefore a few syntax errors have slipped through. Fix them.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191111094411.427174-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
By default VM build test use qemu-img from system's PATH to
create the image disk. Due the lack of qemu-img on the system
or the desire to simply use a version built with QEMU, it would
be nice to allow one to set its path. So this patch makes that
possible by reading the path to qemu-img from QEMU_IMG if set,
otherwise it fallback to default behavior.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191114134246.12073-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Create a bitops.rst which is just a container for the
kernel-doc comments in qemu/bitops.h.
This is mostly a test of the kernel-doc extension machinery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-7-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-4-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Import Linux's kernel-doc script as of commit 15e2544ed38a1e, as well
as the Sphinx extension to call kernel-doc according to the arguments
and parameters given to a reStructuredText directive.
The kernel-doc extension accepts a filename, which is relative to
the QEMU source tree root. The extension also notifies Sphinx about the
document dependency on the file, causing the document to be rebuilt when
the file has been changed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The same way the arch tag is being used as a fallback for the arch
parameter, let's do the same for QEMU's machine and avoid some boiler
plate code.
This is now possible because, since Avocado 72.0, it's possible to use
tags with names that match the machine types on QEMU.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
While we are at it fix up the quoted code sections with the inline ::
approach.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
This makes it a bit clearer what this is about.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a new section explaining the particularities of the microvm
machine type for triggering a guest-initiated shut down.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191115161338.42864-3-slp@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the alignment of the items in the "Limitations" section.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191115161338.42864-2-slp@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'the' has a tendency to double up; squash them back down.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191104185202.102504-1-dgilbert@redhat.com>
[lv: removed disas/libvixl/vixl/invalset.h change]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Allow cpu 'host' to enable SVE when it's available, unless the
user chooses to disable it with the added 'sve=off' cpu property.
Also give the user the ability to select vector lengths with the
sve<N> properties. We don't adopt 'max' cpu's other sve property,
sve-max-vq, because that property is difficult to use with KVM.
That property assumes all vector lengths in the range from 1 up
to and including the specified maximum length are supported, but
there may be optional lengths not supported by the host in that
range. With KVM one must be more specific when enabling vector
lengths.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-10-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the SVE vq map initialization and validation with KVM's
supported vector lengths when KVM is enabled. In order to determine
and select supported lengths we add two new KVM functions for getting
and setting the KVM_REG_ARM64_SVE_VLS pseudo-register.
This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-9-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce cpu properties to give fine control over SVE vector lengths.
We introduce a property for each valid length up to the current
maximum supported, which is 2048-bits. The properties are named, e.g.
sve128, sve256, sve384, sve512, ..., where the number is the number of
bits. See the updates to docs/arm-cpu-features.rst for a description
of the semantics and for example uses.
Note, as sve-max-vq is still present and we'd like to be able to
support qmp_query_cpu_model_expansion with guests launched with e.g.
-cpu max,sve-max-vq=8 on their command lines, then we do allow
sve-max-vq and sve<N> properties to be provided at the same time, but
this is not recommended, and is why sve-max-vq is not mentioned in the
document. If sve-max-vq is provided then it enables all lengths smaller
than and including the max and disables all lengths larger. It also has
the side-effect that no larger lengths may be enabled and that the max
itself cannot be disabled. Smaller non-power-of-two lengths may,
however, be disabled, e.g. -cpu max,sve-max-vq=4,sve384=off provides a
guest the vector lengths 128, 256, and 512 bits.
This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the query-cpu-model-expansion QMP command to Arm. We
do this selectively, only exposing CPU properties which represent
optional CPU features which the user may want to enable/disable.
Additionally we restrict the list of queryable cpu models to 'max',
'host', or the current type when KVM is in use. And, finally, we only
implement expansion type 'full', as Arm does not yet have a "base"
CPU type. More details and example queries are described in a new
document (docs/arm-cpu-features.rst).
Note, certainly more features may be added to the list of advertised
features, e.g. 'vfp' and 'neon'. The only requirement is that we can
detect invalid configurations and emit failures at QMP query time.
For 'vfp' and 'neon' this will require some refactoring to share a
validation function between the QMP query and the CPU realize
functions.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support to handle failover device pairs of a virtio-net
device and a (vfio-)pci device, where the virtio-net acts as the standby
device and the (vfio-)pci device as the primary.
The general idea is that we have a pair of devices, a (vfio-)pci and a
emulated (virtio-net) device. Before migration the vfio device is
unplugged and data flows to the emulated device, on the target side
another (vfio-)pci device is plugged in to take over the data-path. In the
guest the net_failover module will pair net devices with the same MAC
address.
To achieve this we need:
1. Provide a callback function for the should_be_hidden DeviceListener.
It is called when the primary device is plugged in. Evaluate the QOpt
passed in to check if it is the matching primary device. It returns
if the device should be hidden or not.
When it should be hidden it stores the device options in the VirtioNet
struct and the device is added once the VIRTIO_NET_F_STANDBY feature is
negotiated during virtio feature negotiation.
If the virtio-net devices are not realized at the time the (vfio-)pci
devices are realized, we need to connect the devices later. This way
we make sure primary and standby devices can be specified in any
order.
2. Register a callback for migration status notifier. When called it
will unplug its primary device before the migration happens.
3. Register a callback for the migration code that checks if a device
needs to be unplugged from the guest.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-11-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is mostly extracted from Emilio's more verbose commit comments
with some additional verbiage from me.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.
The changes were heavily inspired by commit 6a8c0b5102.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
Document the new microvm machine type.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Hyper-V TLFS specifies this enlightenment as:
"NoNonArchitecturalCoreSharing - Indicates that a virtual processor will never
share a physical core with another virtual processor, except for virtual
processors that are reported as sibling SMT threads. This can be used as an
optimization to avoid the performance overhead of STIBP".
However, STIBP is not the only implication. It was found that Hyper-V on
KVM doesn't pass MD_CLEAR bit to its guests if it doesn't see
NoNonArchitecturalCoreSharing bit.
KVM reports NoNonArchitecturalCoreSharing in KVM_GET_SUPPORTED_HV_CPUID to
indicate that SMT on the host is impossible (not supported of forcefully
disabled).
Implement NoNonArchitecturalCoreSharing support in QEMU as tristate:
'off' - the feature is disabled (default)
'on' - the feature is enabled. This is only safe if vCPUS are properly
pinned and correct topology is exposed. As CPU pinning is done outside
of QEMU the enablement decision will be made on a higher level.
'auto' - copy KVM setting. As during live migration SMT settings on the
source and destination host may differ this requires us to add a migration
blocker.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20191018163908.10246-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- block: Fix crash with qcow2 partial cluster COW with small cluster
sizes (misaligned write requests with BDRV_REQ_NO_FALLBACK)
- qcow2: Fix integer overflow potentially causing corruption with huge
requests
- vhdx: Detect truncated image files
- tools: Support help options for --object
- Various block-related replay improvements
- iotests/028: Fix for long $TEST_DIRs
-----BEGIN PGP SIGNATURE-----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=gCHy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- block: Fix crash with qcow2 partial cluster COW with small cluster
sizes (misaligned write requests with BDRV_REQ_NO_FALLBACK)
- qcow2: Fix integer overflow potentially causing corruption with huge
requests
- vhdx: Detect truncated image files
- tools: Support help options for --object
- Various block-related replay improvements
- iotests/028: Fix for long $TEST_DIRs
# gpg: Signature made Mon 14 Oct 2019 17:02:54 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: Test large write request to qcow2 file
qcow2: Limit total allocation range to INT_MAX
qemu-nbd: Support help options for --object
qemu-img: Support help options for --object
qemu-io: Support help options for --object
vl: Split off user_creatable_print_help()
iotests/028: Fix for long $TEST_DIRs
block: Reject misaligned write requests with BDRV_REQ_NO_FALLBACK
replay: add BH oneshot event for block layer
replay: finish record/replay before closing the disks
replay: don't drain/flush bdrv queue while RR is working
replay: update docs for record/replay with block devices
replay: disable default snapshot for record/replay
block: implement bdrv_snapshot_goto for blkreplay
block/vhdx: add check for truncated image files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tracetool needs to know the group name ("all", "root", or a specific
subdirectory). Also remove the stdin redirection because tracetool.py
needs the path to the trace-events file. Update the documentation.
Fixes: 2098c56a9b
("trace: move setting of group name into Makefiles")
Buglink: https://bugs.launchpad.net/bugs/1844814
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191009135154.10970-1-stefanha@redhat.com>
This patch updates the description of the command lines for using
record/replay with attached block devices.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RCU_READ_LOCK_GUARD() takes the rcu_read_lock and then uses glib's
g_auto infrastructure (and thus whatever the compiler's hooks are) to
release it on all exits of the block.
WITH_RCU_READ_LOCK_GUARD() is similar but is used as a wrapper for the
lock, i.e.:
WITH_RCU_READ_LOCK_GUARD() {
stuff under lock
}
Note the 'unused' attribute is needed to work around clang bug:
https://bugs.llvm.org/show_bug.cgi?id=43482
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Documents basic concepts of ACPI Generic Event device(GED)
and interface between QEMU and the ACPI BIOS.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20190918130633.4872-10-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was pointed out we haven't documented the check-tcg part of the
build system. Attempt to rectify that now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We represent the parse tree as OrderedDict. We fetch optional dict
members with .get(). So far, so good.
We represent null literals as None. .get() returns None both for
"absent" and for "present, value is the null literal". Uh-oh.
Test features-if-invalid exposes this bug: "'if': null" is
misinterpreted as absent "if".
We added null to the schema language to "allow [...] an explicit
default value" (commit e53188ada5 "qapi: Allow true, false and null in
schema json", v2.4.0). Hasn't happened; null is still unused except
as generic invalid value in tests/.
To fix, we'd have to replace .get() by something more careful, or
represent null differently. Feasible, but we got more and bigger fish
to fry right now. Remove the null literal from the schema language.
Replace null in tests by another invalid value.
Test features-if-invalid now behaves as it should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We document the language by giving patterns of valid JSON objects.
The patterns contain placeholders we don't define anywhere; their
names have to speak for themselves. I guess they do, but I'd prefer a
bit more rigor. Provide a grammar instead, and rework the text
accordingly.
Documentation for QAPI schema conditionals (commit 967c885108,
6cc32b0e14, 87adbbffd4..3e270dcacc) and feature flags (commit
6a8c0b5102) was bolted on. The sections documenting types, commands
and events don't mention them. Section "Features" and "Configuring
the schema" then provide additional syntax for types, commands and
events. I hate that. Fix the sections documenting types, commands
and events to provide accurate syntax, and point to "Features" and
"Configuring the schema" for details.
We talk about "(top-level) expressions other than include and pragma".
Adopt more convenient terminology: a (top-level) expression is either
a directive (include or pragma) or a definition (anything else).
Avoid the terms "dictionary" and "key". Stick to JSON terminology
"object" and "member name" instead.
While there, make spacing more consistent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-16-armbru@redhat.com>
The introduction to the QAPI schema is somewhat rambling. Rewrite for
clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-15-armbru@redhat.com>
We have some compatibility advice buried in sections "Enumeration
types" and "Struct types". Compatibility is actually about commands
and events. It devolves to the types used there. All kinds of types,
not just enumerations and structs.
Replace the existing advice by a new section "Compatibility
considerations".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-14-armbru@redhat.com>
[Squash in paragraph on invisible schema changes, as per Eric's review]
Section "QMP/Guest agent schema" starts with a brief introduction,
then subsection "Comments", then subsection "Schema overview" (more
elaborate introduction), and only then talks about schema entities
like types, commands, and so forth.
Subsection "Comments" is long and tiring: almost 500 words, mostly
about doc comments. Move the doc comment part to its own subsection
"Documentation comments" at the very end of "QMP/Guest agent schema".
Subsection "Schema overview" explains naming rules at considerable
length: 250 words. Move this part to its own subsection "Naming rules
and reserved names" right after the subsections on schema entities.
Subsection "Enumeration types" is wedged between "Struct types" and
"Union types". Move it before "Struct types".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-13-armbru@redhat.com>
Absent flat union branches default to the empty struct (since commit
800877bb16 "qapi: allow empty branches in flat unions"). But an
attempt to omit all of them is rejected with "Union 'FOO' has no
branches". Harmless oddity, but it's easy to avoid, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-11-armbru@redhat.com>
[Commit message typo fixed]
The specification claims "Each expression that isn't an include
directive may be preceded by a documentation block", but the code also
rejects them for pragma directives. The code is correct. Fix the
specification.
The specification reserves member names starting with 'has_', but the
code also reserves name 'u'. Fix the specification.
The specification claims "The string 'max' is not allowed as an enum
value". Untrue. Fix the specification. While there, delete the
naming advice, because it's redundant with the naming rules in section
"Schema overview"
The specification claims "No branch of the union can be named 'max',
as this would collide with the implicit enum". Untrue. Fix the
specification.
The specification claims "It is not allowed to name an event 'MAX',
since the generator also produces a C enumeration of all event names
with a generated _MAX value at the end." Untrue. Fix the
specification.
The specification claims "All branches of the union must be complex
types", but the code permits only struct types. The code is correct.
Fix the specification.
The specification claims a command's return type "must be the string
name of a complex or built-in type, a one-element array containing the
name of a complex or built-in type" unless the command is in pragma
'returns-whitelist'. The code does not permit built-in types. Fix
the specification.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-5-armbru@redhat.com>
Commands and events can define their argument type inline (default) or
by referring to another type ('boxed': true, since commit c818408e44
"qapi: Implement boxed types for commands/events", v2.7.0). The
unboxed inline definition is an (anonymous) struct type. The boxed
type may be a struct, union, or alternate type.
The latter is problematic: docs/interop/qemu-spec.txt requires the
value of the 'data' key to be a json-object, but any non-degenerate
alternate type has at least one branch that isn't.
Fortunately, we haven't made use of alternates in this context outside
tests/. Drop support for them.
QAPISchemaAlternateType.is_empty() is now unused. Drop it, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-4-armbru@redhat.com>
Event format ending with newlines confuse the trace reports.
Forbid them.
Add a check to refuse new format added with trailing newline:
$ make
[...]
GEN hw/misc/trace.h
Traceback (most recent call last):
File "scripts/tracetool.py", line 152, in <module>
main(sys.argv)
File "scripts/tracetool.py", line 143, in main
events.extend(tracetool.read_events(fh, arg))
File "scripts/tracetool/__init__.py", line 367, in read_events
event = Event.build(line)
File "scripts/tracetool/__init__.py", line 281, in build
raise ValueError("Event format can not end with a newline character")
ValueError: Error at hw/misc/trace-events:121: Event format can not end with a newline character
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-3-philmd@redhat.com
Message-Id: <20190916095121.29506-3-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows to receive mouse and keyboard events from
a Barrier server.
This is enabled by adding the following parameter on the
command line
... -object input-barrier,id=$id,name=$name ...
Where $name is the name declared in the screens section of barrier.conf
The barrier server (barriers) must be configured and must run on the
local host.
For instance:
section: screens
localhost:
...
VM-1:
...
end
section: links
localhost:
right = VM-1
VM-1:
left = localhost
end
Then on the QEMU command line:
... -object input-barrier,id=barrie0,name=VM-1 ...
When the mouse will move out of the screen of the local host on
the right, the mouse and the keyboard will be grabbed and all
related events will be send to the guest OS.
This is usefull when qemu is configured without emulated graphic card
but with a VFIO attached graphic card.
More information about Barrier can be found at:
https://github.com/debauchee/barrier
This avoids to install the Barrier server in the guest OS,
for instance when it is not supported or during the installation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20190906083812.29487-1-laurent@vivier.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch documents the steps to use virtio pmem.
It also documents other useful information about
virtio pmem e.g use-case, comparison with Qemu NVDIMM
backend and current limitations.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190821121624.5382-1-pagupta@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Persistent backend setup requires some knowledge about nvdimm and ndctl
tool. Some users report they may struggle to gather these knowledge and
have difficulty to setup it properly.
Here we provide two examples for persistent backend and gives the link
to ndctl. By doing so, user could try it directly and do more
investigation on persistent backend setup with ndctl.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190801004053.7021-1-richardw.yang@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The qemu-ga documentation is currently in qemu-ga.texi in
Texinfo format, which we present to the user as:
* a qemu-ga manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-ga manpage
* part of the interop/ Sphinx manual
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 20190905131040.8350-1-peter.maydell@linaro.org
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- Advertise NBD_FLAG_CAN_MULTI_CONN on readonly images
- Tolerate larger set of server error responses during handshake
- More precision on handling fallocate() failures due to alignment
- Better documentation of NBD connection URIs
- Implement new extension NBD_CMD_FLAG_FAST_ZERO to benefit qemu-img convert
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl1xeUEACgkQp6FrSiUn
Q2qCTQgAh0Q8HM6qDhDCTtNZ/HxxNTZ7n1O9ZB7bTQ+S6miFPh77+qsI/Gk81rJR
iwPKv1k8JZBnWtciwl2uynBCVlxHmBtxmVlzc66BVg3TMyOx3Eedsbel9Dl5QUgp
JREwPUN0uyly+zDL8X/7WB+Xmldz2u6cbnfl8JeszCscnhJ4cFNMzW5b4gaCpi73
OYt8AU2vg8c9yDK6lb/Xcc7dGSAba1vbcTSc6GPaGGlY5nPM/JKsWjlU8Abg2krM
m/mGpQzsb72xcL/9/vY17xarFi8uz4uU+U0Ohpe5XYl+IO/RiEgjokitlgrUtMWi
LNVKWj+5E0lIsNVSwhIWLEQxQACbjw==
=P3mc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-09-05-v2' into staging
nbd patches for 2019-09-05
- Advertise NBD_FLAG_CAN_MULTI_CONN on readonly images
- Tolerate larger set of server error responses during handshake
- More precision on handling fallocate() failures due to alignment
- Better documentation of NBD connection URIs
- Implement new extension NBD_CMD_FLAG_FAST_ZERO to benefit qemu-img convert
# gpg: Signature made Thu 05 Sep 2019 22:08:17 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-09-05-v2:
nbd: Implement server use of NBD FAST_ZERO
nbd: Implement client use of NBD FAST_ZERO
nbd: Prepare for NBD_CMD_FLAG_FAST_ZERO
nbd: Improve per-export flag handling in server
docs: Update preferred NBD device syntax
block: workaround for unaligned byte range in fallocate()
nbd: Tolerate more errors to structured reply request
nbd: Use g_autofree in a few places
nbd: Advertise multi-conn for shared read-only connections
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to
avoid wasting time on a preliminary write-zero request that will later
be rewritten by actual data, if it is known that the write-zero
request will use a slow fallback; but in doing so, could not optimize
for NBD. The NBD specification is now considering an extension that
will allow passing on those semantics; this patch updates the new
protocol bits and 'qemu-nbd --list' output to recognize the bit, as
well as the new errno value possible when using the new flag; while
upcoming patches will improve the client to use the feature when
present, and the server to advertise support for it.
The NBD spec recommends (but not requires) that ENOTSUP be avoided for
all but failures of a fast zero (the only time it is mandatory to
avoid an ENOTSUP failure is when fast zero is supported but not
requested during write zeroes; the questionable use is for ENOTSUP to
other actions like a normal write request). However, clients that get
an unexpected ENOTSUP will either already be treating it the same as
EINVAL, or may appreciate the extra bit of information. We were
equally loose for returning EOVERFLOW in more situations than
recommended by the spec, so if it turns out to be a problem in
practice, a later patch can tighten handling for both error codes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message, also handle EOPNOTSUPP]
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client). When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another. But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support. What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.
This patch affects qemu as server in advertising the bit. We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.
See also: https://bugzilla.redhat.com/1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
In our documentation, we use a mix of "$QEMU", "qemu-system-i386" and
"qemu-system-x86_64" when we give examples to the users how to run
QEMU. Some more consistency would be good here. Also some distributions
use different names for the QEMU binary (e.g. "qemu-kvm" in RHEL), so
providing more flexibility here would also be good. Thus let's define
some variables for the names of the QEMU command and use those in the
documentation instead: @value{qemu_system} for generic examples, and
@value{qemu_system_x86} for examples that only work with the x86
binaries.
Message-Id: <20190828093447.12441-1-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
-----BEGIN PGP SIGNATURE-----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=E+7d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' into staging
ppc patch queue for 2019-08-21
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
# gpg: Signature made Wed 21 Aug 2019 08:24:44 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits)
ppc: Fix emulated single to double denormalized conversions
ppc: Fix emulated INFINITY and NAN conversions
ppc: conform to processor User's Manual for xscvdpspn
ppc: Add support for 'mffsl' instruction
target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR
spapr/xive: Mask the EAS when allocating an IRQ
spapr: Implement better workaround in spapr-vty device
spapr/irq: Drop spapr_irq_msi_reset()
spapr/pci: Free MSIs during reset
spapr/pci: Consolidate de-allocation of MSIs
ppc: remove idle_timer logic
spapr: Implement ibm,suspend-me
i386: use machine class ->wakeup method
machine: Add wakeup method to MachineClass
ppc/xive: Improve 'info pic' support
ppc/xive: Provide silent escalation support
ppc/xive: Provide unconditional escalation support
ppc/xive: Provide escalation support
ppc/xive: Provide backlog support
ppc/xive: Implement TM_PULL_OS_CTX special command
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move query-target and its return type TargetInfo from misc.json to
machine.json, where they are covered by MAINTAINERS section "Machine
core". Also move its implementation from arch_init.c to
hw/core/machine-qmp-cmds, where it is likewise covered.
All users of SysEmuTarget are now in machine.json. Move it there from
common.json.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-3-armbru@redhat.com>
For now this only covers hcalls relating to TPM communication since
it's the only one particularly important from a QEMU perspective atm,
but others can be added here where it makes sense.
The full specification for all hcalls/ucalls will eventually be made
available in the public/OpenPower version of the PAPR specification.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20190717205842.17827-2-mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch introduces docs/devel/replay.txt which describes the rules
that should be followed to make virtual devices usable in record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgauk@ispras.ru>
--
v9: fixed external virtual clock description (reported by Artem Pisarenko)
Message-Id: <156404426119.18669.6707258931552832854.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
- preallocation=falloc/full support for LUKS
- Various minor fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl1awg0SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9Au70H/jTfnZ5HGCnuMG9Qfz592b3OJzLxAUxy
zRYZeYeQv2iBAJ8D3guJb4TIsvs9FgiZq6W+a+uXPZUfV2cPjHEcl2votnKuyWsx
udzR5wyGEbZjeMIv5lhzWMf3oqWin5MVDFQ2xUSjt9rfNDiHH4pMHuLO6AGkVaRS
MEOEs1/GEZ1mXPckG00YBJXMgmsk+7xWZ5cMjUI8Hsa1/nC2GLckh2j5y2rt3ppc
dt2he6/etnK0d8Yt8yZXyNl8xSW95f0Z+a1RefgGX5n3kCV6K/9hkRIhCTdunzDd
hULNummeZghjbn0HLyFjEnJlzSglWYprUsQj1HaXB4/LwMUwj3yNxHk=
=dDid
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-08-19' into staging
Block patches:
- preallocation=falloc/full support for LUKS
- Various minor fixes
# gpg: Signature made Mon 19 Aug 2019 16:36:45 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-08-19:
doc: Preallocation does not require writing zeroes
iotests: Fix 141 when run with qed
vpc: Do not return RAW from block_status
vmdk: Make block_status recurse for flat extents
vdi: Make block_status recurse for fixed images
iotests: Full mirror to existing non-zero image
iotests: Test convert -n to pre-filled image
iotests: Convert to preallocated encrypted qcow2
vhdx: Fix .bdrv_has_zero_init()
vdi: Fix .bdrv_has_zero_init()
qcow2: Fix .bdrv_has_zero_init()
block: Use bdrv_has_zero_init_truncate()
block: Implement .bdrv_has_zero_init_truncate()
block: Add bdrv_has_zero_init_truncate()
mirror: Fix bdrv_has_zero_init() use
qemu-img: Fix bdrv_has_zero_init() use in convert
LUKS: support preallocation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When preallocating an encrypted qcow2 image, it just lets the protocol
driver write data and then does not mark the clusters as zero.
Therefore, reading this image will yield effectively random data.
As such, we have not fulfilled the promise of always writing zeroes when
preallocating an image in a while. It seems that nobody has really
cared, so change the documentation to conform to qemu's actual behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190711132935.13070-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Call this form a "parameter", returning a value extracted
from the DisasContext.
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdOciFAAoJECgfDbjSjVRp/FwH/jNag2BkBfyvTNibuZi0V4uH
1nXmZQI9gQye6eDmkg0T0fl+8zpMNO7OIGRjhOemMOpfJ1yAYrkFI4OrbTV40lOe
UvH/6s8m5DlWPXrVvkv52esLPrV9cV4kULpS0yDfngfJ7CuQTMc/er9ZBav38iSG
kDH92LTWqIoZq08JUkdOxqjl5me8vnvQHieo/SgFNhuJon+RkGZvcN7j4zj/l1cg
ozeXoyBve27TnirGfgjY7/z3kTDTAKW8wWFj/gV2TllmPx4ReH6a6IYwPWrZaOXA
m4ZhTK0D8C2UPtbseHrfriYHkuL4eBK95OJvXc3vC/w14ZmP4tuaipOL7If9oRk=
=oU7D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc: fixes, cleanups
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 25 Jul 2019 16:19:33 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio-balloon: free pbp more aggressively
virtio-balloon: don't track subpages for the PBP
virtio-balloon: Use temporary PBP only
virtio-balloon: Rework pbp tracking data
virtio-balloon: Better names for offset variables in inflate/deflate code
virtio-balloon: Simplify deflate with pbp
virtio-balloon: Fix QEMU crashes on pagesize > BALLOON_PAGE_SIZE
virtio-balloon: Fix wrong sign extension of PFNs
i386/acpi: show PCI Express bus on pxb-pcie expanders
ioapic: kvm: Skip route updates for masked pins
i386/acpi: fix gint overflow in crs_range_compare
docs: clarify multiqueue vs multiple virtqueues
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The vhost-user specification does not explain when
VHOST_USER_PROTOCOL_F_MQ must be implemented. This may lead
implementors of vhost-user masters to believe that this protocol feature
is required for any device that has multiple virtqueues. That would be
a mistake since existing vhost-user slaves offer multiple virtqueues but
do not advertise VHOST_USER_PROTOCOL_F_MQ.
For example, a vhost-net device with one rx/tx queue pair is not
multiqueue. The slave does not need to advertise
VHOST_USER_PROTOCOL_F_MQ. Therefore the master must assume it has these
virtqueues and cannot rely on askingt the slave how many virtqueues
exist.
Extend the specification to explain the different between true
multiqueue and regular devices with a fixed virtqueue layout.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190624091304.666-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
A supposed exploit of QEMU was recently announced as CVE-2019-12928
claiming that the monitor console was insecure because the "migrate"
command enabled arbitrary command execution for a remote attacker.
To be a security risk the user launching QEMU must have configured
the monitor in a way that allows for other users to access it. The
exploit report quoted use of the "tcp" character device backend for
QMP.
This would indeed allow any network user to connect to QEMU and
execute arbitrary commands, however, this is not a flaw in QEMU.
It is the normal expected behaviour of the monitor console and the
commands it supports. Given a monitor connection, there are many
ways to access host file system content besides the migrate command.
The reality is that the monitor console (whether QMP or HMP) is
considered a privileged interface to QEMU and as such must only
be made available to trusted users. IOW, making it available with
no authentication over TCP is simply a, very serious, user
configuration error not a security flaw in QEMU itself.
The one thing this bogus security report highlights though is that
we have not clearly documented the security implications around the
use of the monitor. Add a few paragraphs of text to the security
docs explaining why the monitor is a privileged interface and making
a recommendation to only use the UNIX socket character device backend.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The annotated style json we use in QMP documentation is not strict json
and depending on the version of Sphinx (2.0+) or Pygments installed,
might cause the build to fail.
Use the new QMP lexer.
Further, some versions of Sphinx can not apply custom lexers to "code"
directives and require the use of "code-block" directives instead, so
make that change at this time as well.
Tested under:
- Sphinx 1.3.6 and Pygments 2.4
- Sphinx 1.7.6 and Pygments 2.2 (Fedora 29 packages)
- Sphinx 2.0.1 and Pygments 2.4
- Sphinx 3.0.0+/f396b3a783 and Pygments 2.4 (From Sphinx git c4f44bdd)
Reported-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20190603214653.29369-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Sphinx, through Pygments, does not like annotated json examples very
much. In some versions of Sphinx (1.7), it will render the non-json
portions of code blocks in red, but in newer versions (2.0) it will
throw an exception and not highlight the block at all. Though we can
suppress this warning, it doesn't bring back highlighting on non-strict
json blocks.
We can alleviate this by creating a custom lexer for QMP examples that
allows us to properly highlight these examples in a robust way, keeping
our directionality and elision notations.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reported-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190603214653.29369-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Pygments and Sphinx get pickier all the time; Sphinx 2.1+ now catches
these errors.
Signed-off-by: John Snow <jsnow@redhat.com>
Reported-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190603214653.29369-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- tests/vm updates and clean-ups
- tests/vm serial autobuild on host (-netbsd v3)
- ensure MacOS builds do "brew update"
- ensure we test --static user builds
- fix hyperv compile failure
- fix missing var warning for OpenBSD (v2)
This brings my testing back to green on all CI services. Please note
the BSD installs will throw out some warnings during the setup phase.
They shouldn't re-occur once the images are built. NetBSD has been
dropped for now given slow install issues.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl0fIzkACgkQ+9DbCVqe
KkQ5rggAivGftiInedQmF0M8F+vBHSQNUSVrB19e/mBgA/Z4WopFrZNUltAMry84
HwvQFmzAkq9OwqkOxeGcM3ABSa4Eum6lyxURg767TxK5NswKknEacgpt83FsXAJU
nckTJPdeIGWIWntyBhu4TdREGVvYR1hk3aDBcb81V5Y5ZVkNaOp//td0eMDHuP0/
EIGFfZt78kCgxs3Yblhen8ayx4XiEF2oICMZi+jZZnjcmOfHsYzHASq7saWDS+ne
2fPgYLl6E/q5VgrUa4mziNu1bUPSfdidp8028Kc8FrpY/vVqvkU3TANDrTP8ag8w
MwvRpyOrm9zC1Oe+diBk+uAfI7GmcA==
=4Lin
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-050719-3' into staging
Various testing fixes:
- tests/vm updates and clean-ups
- tests/vm serial autobuild on host (-netbsd v3)
- ensure MacOS builds do "brew update"
- ensure we test --static user builds
- fix hyperv compile failure
- fix missing var warning for OpenBSD (v2)
This brings my testing back to green on all CI services. Please note
the BSD installs will throw out some warnings during the setup phase.
They shouldn't re-occur once the images are built. NetBSD has been
dropped for now given slow install issues.
# gpg: Signature made Fri 05 Jul 2019 11:15:21 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-050719-3:
migration: move port_attr inside CONFIG_LINUX
target/i386: fix feature check in hyperv-stub.c
Makefile: Rename the 'vm-test' target as 'vm-help'
.travis.yml: force a brew update for MacOS builds
.travis.yml: default the --disable-system build to --static
tests/vm: ubuntu.i386: apt proxy setup
tests/vm: fedora autoinstall, using serial console
tests/vm: freebsd autoinstall, using serial console
tests/vm: openbsd autoinstall, using serial console
tests/vm: serial console support helpers
tests/vm: add vm-boot-{ssh,serial}-<guest> targets
tests/vm: proper guest shutdown
tests/vm: run test builds on snapshot
tests/vm: use ssh with pty unconditionally
tests/vm: send proxy environment variables over ssh
tests/vm: add source repos on ubuntu.i386
tests/vm: pin ubuntu.i386 image
tests/vm: avoid image presence check and removal
tests/vm: avoid extra compressed image copy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEbBAABAgAGBQJdHmkBAAoJECgfDbjSjVRpEAIH+Kmy8n5Et9NzsnmNqHAiC/pg
3V5wGyp9M4ZJVPXC0z/Q1sYJ3YYP6dBd4tjj2/7LzYZSlqlQIs83UlQCo0XTiliH
/jZD/IaAZABnfB7vAeZW67WNT2a20xG2Jr83083lSaDUI/pfIdvbMelIbBLmo/kd
tWdAAWT0kcGYjyz4xQQgtAH6zAQUleKE7ECUJ2TpJQbSMLxdI/YTaoYqek471YdP
ju5OLBO3WbNkSE9JYz4MJqTudYK0sKu568UqBVF8JdpFd5Cv+X/OI+bCsc4QK8KN
DTtFVVvbm1KGPSceqc9rwsDjO4Wd8ThvuZxrB029AahD6vT82F13IHpi/S29Fw==
=WAFb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc, pci: features, fixes, cleanups
virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 04 Jul 2019 22:00:49 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (22 commits)
docs: avoid vhost-user-net specifics in multiqueue section
libvhost-user: implement VHOST_USER_PROTOCOL_F_MQ
libvhost-user: support many virtqueues
libvhost-user: add vmsg_set_reply_u64() helper
pc: Move compat_apic_id_mode variable to PCMachineClass
virtio: Don't change "started" flag on virtio_vmstate_change()
virtio: Make sure we get correct state of device on handle_aio_output()
virtio: Set "start_on_kick" on virtio_set_features()
virtio: Set "start_on_kick" for legacy devices
virtio: add "use-started" property
virtio-pci: fix missing device properties
pc: Support for virtio-pmem-pci
numa: Handle virtio-pmem in NUMA stats
hmp: Handle virtio-pmem when printing memory device infos
virtio-pci: Proxy for virtio-pmem
virtio-pmem: sync linux headers
virtio-pci: Allow to specify additional interfaces for the base type
virtio-pmem: add virtio device
pcie: minor cleanups for slot control/status
pcie: work around for racy guest init
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "Multiple queue support" section makes references to vhost-user-net
"queue pairs". This is confusing for two reasons:
1. This actually applies to all device types, not just vhost-user-net.
2. VHOST_USER_GET_QUEUE_NUM returns the number of virtqueues, not the
number of queue pairs.
Reword the section so that the vhost-user-net specific part is relegated
to the very end: we acknowledge that vhost-user-net historically
automatically enabled the first queue pair.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have 'make check-help', use the 'make vm-help' form
to display helps about VM testing. Keep the old target to not
bother old customs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190531064341.29730-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Older KVMs on POWER9 don't support destroying/recreating a KVM XICS
device, which is required by 'dual' interrupt controller mode. This
causes QEMU to emit a warning when the guest is rebooted and to fall
back on XICS emulation:
qemu-system-ppc64: warning: kernel_irqchip allowed but unavailable:
Error on KVM_CREATE_DEVICE for XICS: File exists
If kernel irqchip is required, QEMU will thus exit when the guest is
first rebooted. Failing QEMU this late may be a painful experience
for the user.
Detect that and exit at machine init instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156044430517.125694.6207865998817342638.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This includes various small updates and a better description of the
chosen interrupt mode resulting from the combination of the 'ic-mode'
machine option, the 'kernel_irqchip' option, guest support and KVM
support.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190612160425.27670-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts
Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).
Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>
Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Hyper-V on KVM can only use Synthetic timers with Direct Mode (opting for
an interrupt instead of VMBus message). This new capability is only
announced in KVM_GET_SUPPORTED_HV_CPUID.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In many case we just want to give Windows guests all currently supported
Hyper-V enlightenments and that's where this new mode may come handy. We
pass through what was returned by KVM_GET_SUPPORTED_HV_CPUID.
hv_cpuid_check_and_set() is modified to also set cpu->hyperv_* flags as
we may want to check them later (and we actually do for hv_runtime,
hv_synic,...).
'hv-passthrough' is a development only feature, a migration blocker is
added to prevent issues while migrating between hosts with different
feature sets.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, there is no doc describing hv-* CPU flags, people are
encouraged to get the information from Microsoft Hyper-V Top Level
Functional specification (TLFS). There is, however, a bit of QEMU
specifics.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have a monitor/ subdirectory, let's move hmp.c and qmp.c
from the root directory there. As they contain implementations of
monitor commands, rename them to {hmp,qmp}-cmds.c, so that {hmp,qmp}.c
are free for the HMP and QMP infrastructure.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-9-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Create a new monitor/ subdirectory and move monitor.c there. As the plan
is to move the monitor core into separate files, use the chance to
rename it to misc.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-8-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now we have some rST format docs in the docs/specs/ manual, we should
actually build and install it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190610152444.20859-3-peter.maydell@linaro.org
The docs/specs/index.rst has a couple of minor issues which
we didn't notice because we weren't building the manual:
* the ToC entry for the new PPC XIVE docs points to
a nonexistent file
* the initial comment needs to be marked by '..', not '.',
or it will appear in the output
* the title doesn't match the capitialization used by
the existing interop or devel manuals, and uses
'full-system emulation' rather than the 'system emulation'
that the interop manual title uses
Fix these minor issues before we start trying to build the manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190610152444.20859-2-peter.maydell@linaro.org
Our user-facing manual currently has a section "translator internals"
which has some high-level information about the design of the
TCG translator. This should really be in our new devel/ manual.
Convert it to RST format and move it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190607152827.18003-2-peter.maydell@linaro.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190605131221.29432-1-marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes, the behaviour of QEMU changes without a change in the QMP
syntax (usually by allowing values or operations that previously
resulted in an error). QMP clients may still need to know whether
they can rely on the changed behavior.
Let's add feature flags to the QAPI schema language, so that we can make
such changes visible with schema introspection.
An example for a schema definition using feature flags looks like this:
{ 'struct': 'TestType',
'data': { 'number': 'int' },
'features': [ 'allow-negative-numbers' ] }
Introspection information then looks like this:
{ "name": "TestType", "meta-type": "object",
"members": [
{ "name": "number", "type": "int" } ],
"features": [ "allow-negative-numbers" ] }
This patch implements feature flags only for struct types. We'll
implement them more widely as needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-2-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The default-configs/ example added in 717171bd20 is no
more accurate since fa212a2b8b (and various further other
commits).
The Kconfig build system is now in place.
Use the aarch64-softmmu config as example.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190529140504.21580-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All callers of bdrv_set_aio_context() are eliminated now, they have
moved to bdrv_try_set_aio_context() and related safe functions. Remove
bdrv_set_aio_context().
With this, we can now know that the .set_aio_ctx callback must be
present in bdrv_set_aio_context_ignore() because
bdrv_can_set_aio_context() would have returned false previously, so
instead of checking the condition, we can assert it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
-----BEGIN PGP SIGNATURE-----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=2q3B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190529' into staging
ppc patch queue 2019-05-29
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
ppc/pnv: add dummy XSCOM registers for PRD initialization
ppc/pnv: introduce new skiboot platform properties
spapr: Don't migrate the hpt_maxpagesize cap to older machine types
spapr: change default interrupt mode to 'dual'
spapr/xive: fix multiple resets when using the 'dual' interrupt mode
docs: provide documentation on the POWER9 XIVE interrupt controller
spapr/irq: add KVM support to the 'dual' machine
ppc/xics: fix irq priority in ics_set_irq_type()
spapr/irq: initialize the IRQ device only once
spapr/irq: introduce a spapr_irq_init_device() helper
spapr: check for the activation of the KVM IRQ device
spapr: introduce routines to delete the KVM IRQ device
sysbus: add a sysbus_mmio_unmap() helper
spapr/xive: activate KVM support
spapr/xive: add migration support for KVM
spapr/xive: introduce a VM state change handler
spapr/xive: add state synchronization with KVM
spapr/xive: add hcall support when under KVM
spapr/xive: add KVM support
spapr: Print out extra hints when CAS negotiation of interrupt mode fails
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new vhost-user message to give a unix socket to a vhost-user
backend for GPU display updates.
Back when I started that work, I added a new GPU channel because the
vhost-user protocol wasn't bidirectional. Since then, there is a
vhost-user-slave channel for the slave to send requests to the master.
We could extend it with GPU messages. However, the GPU protocol is
quite orthogonal to vhost-user, thus I chose to have a new dedicated
channel.
See vhost-user-gpu.rst for the protocol details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This documents the overall XIVE architecture and the XIVE support for
sPAPR guest machines (pseries).
It also provides documentation on the 'info pic' command.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190521082411.24719-1-clg@kaod.org>
Reviewed-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Update x86 CPU model guidance to recommend that the md-clear feature is
manually enabled with all Intel CPU models, when supported by the host
microcode.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190515141011.5315-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190315180735.13096-1-marcandre.lureau@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Makefile tries to include device Kconfig dependencies via
-include $(SUBDIR_DEVICES_MAK_DEP)
and thus expects files that match *-softmmu/config-devices.mak.d ...
however, the minikconf script currently generates files a la
"*-softmmu-config.devices.mak.d" instead, so the dependency files
simply got ignored so far. For example, after a "touch hw/arm/Kconfig",
the arm-softmmu/config-devices.mak file is currently not re-generated.
Fix it by putting the dependency files in the *-softmmu folders now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This new chapter in the QEMU documentation covers the security
requirements that QEMU is designed to meet and principles for securely
deploying QEMU.
It is just a starting point that can be extended in the future with more
information.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190509121820.16294-3-stefanha@redhat.com
Message-Id: <20190509121820.16294-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At KVM Forum 2018 I gave a presentation on security in QEMU:
https://www.youtube.com/watch?v=YAdRf_hwxU8 (video)
https://vmsplice.net/~stefan/stefanha-kvm-forum-2018.pdf (slides)
This patch adds a guide to secure coding practices. This document
covers things that developers should know about security in QEMU. It is
just a starting point that we can expand on later. I hope it will be
useful as a resource for new contributors and will save code reviewers
from explaining the same concepts many times.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190509121820.16294-2-stefanha@redhat.com
Message-Id: <20190509121820.16294-2-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
