Commit Graph

623 Commits

Author SHA1 Message Date
Alex Williamson
954258a5f1 vfio/pci: Rework RTL8168 quirk
Another rework of this quirk, this time to update to the new quirk
structure.  We can handle the address and data registers with
separate MemoryRegions and a quirk specific data structure, making the
code much more understandable.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23 13:04:47 -06:00
Alex Williamson
6029a424be vfio/pci: Cleanup Nvidia 0x3d0 quirk
The Nvidia 0x3d0 quirk makes use of a two separate registers and gives
us our first chance to make use of separate memory regions for each to
simplify the code a bit.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23 13:04:47 -06:00
Alex Williamson
b946d28611 vfio/pci: Cleanup ATI 0x3c3 quirk
This is an easy quirk that really doesn't need a data structure if
its own.  We can pass vdev as the opaque data and access to the
MemoryRegion isn't required.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23 13:04:47 -06:00
Alex Williamson
056dfcb695 vfio/pci: Cleanup ROM blacklist quirk
Create a vendor:device ID helper that we'll also use as we rework the
rest of the quirks.  Re-reading the config entries, even if we get
more blacklist entries, is trivial overhead and only incurred during
device setup.  There's no need to typedef the blacklist structure,
it's a static private data type used once.  The elements get bumped
up to uint32_t to avoid future maintenance issues if PCI_ANY_ID gets
used for a blacklist entry (avoiding an actual hardware match).  Our
test loop is also crying out to be simplified as a for loop.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23 13:04:45 -06:00
Alex Williamson
0de70dc7ba vfio/pci: Rename MSI/X functions for easier tracing
This allows vfio_msi* tracing.  The MSI/X interrupt tracing is also
pulled out of #ifdef DEBUG_VFIO to avoid a recompile for tracing this
path.  A few cycles to read the message is hardly anything if we're
already in QEMU.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23 13:04:43 -06:00
Alex Williamson
870cb6f104 vfio/pci: Rename INTx functions for easier tracing
Rename functions and tracing callbacks so that we can trace vfio_intx*
to see all the INTx related activities.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23 13:04:43 -06:00
Alex Williamson
d451008e0f vfio/pci: Cleanup RTL8168 quirk and tracing
There's quite a bit of cleanup that can be done to the RTL8168 quirk,
as well as the tracing to prevent a spew of uninteresting accesses
for anything else the driver might choose to use the window registers
for besides the MSI-X table.  There should be no functional change,
but it's now possible to get compact and useful traces by enabling
vfio_rtl8168_quirk*, ex:

vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f000
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f000
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0xfee0100c
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f004
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f004
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f008
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f008
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x49b1
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23 13:04:42 -06:00
Peter Maydell
619622424d Merge vnc-crypto-v9
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJV+CwGAAoJEL6G67QVEE/fResQAKiHbjRRPjtCNjAvVixd2ewa
 O39TXlgQol4EiMKgsrIJf33yaEJQIj5ElNfKOUysgcLdGfL69+XWGQ5WgoHZx40d
 0Iiy8rGOTmCAQMgQYkRmJyayPTkK96jt8rl9psE0ab7JhS4CA2NbgnPWLLzVFwEx
 0BJ0SgHvzIGYy0N+9aQ7lVVUUja/Ksg64/6AAPpBHMkBZkOruk132E9B0D0mL7kL
 rka3OMgLpKqginKD4t3MKII1CnR5iSS2NNB/fJxVzrWK84Wv1/SbD1QnSlHPFWl6
 ffeD9j3F8ihFVdi0nssxK6kHYZW+dAeC8VPxpLcnFffHiNa7yU4XGQxmMuR3F/W/
 Su/R6W9JSP1dY6MCvCPjJNa2t9AW5iG0pGm4MckoZp4H6F46OPuxb0/GWoz/9prU
 S7BPLoB3h7h3otmokIL2MvqlU/5lfqUhlhW7w7ZS6fTNXUT2amFlq2UJZpFuEt0b
 3kAsAaGAq4wk5QB04lSbxW+u/F669L0dobu2FtOHiHECe3bihrCxk0OckzdA0fOP
 kZ14jIsvagXgWG2NAMQFKKXL3OCpfbObEm+mQp6JR6y108TwdXR3XYCudVHAHyK7
 GS+rhTdOtUgtQgpJG97RgdBd1nvil2dZ+NizX9DXu5EhT6le3PKijIOkq/6TLw5H
 5qAYBZCGQXl1bNrmifcH
 =6TWk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/berrange/tags/vnc-crypto-v9-for-upstream' into staging

Merge vnc-crypto-v9

# gpg: Signature made Tue 15 Sep 2015 15:32:38 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/vnc-crypto-v9-for-upstream:
  ui: convert VNC server to use QCryptoTLSSession
  ui: fix return type for VNC I/O functions to be ssize_t
  crypto: introduce new module for handling TLS sessions
  crypto: add sanity checking of TLS x509 credentials
  crypto: introduce new module for TLS x509 credentials
  crypto: introduce new module for TLS anonymous credentials
  crypto: introduce new base module for TLS credentials
  qom: allow QOM to be linked into tools binaries
  crypto: move crypto objects out of libqemuutil.la
  tests: remove repetition in unit test object deps
  qapi: allow override of default enum prefix naming

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-15 15:42:58 +01:00
Daniel P. Berrange
d321e1e526 crypto: introduce new module for handling TLS sessions
Introduce a QCryptoTLSSession object that will encapsulate
all the code for setting up and using a client/sever TLS
session. This isolates the code which depends on the gnutls
library, avoiding #ifdefs in the rest of the codebase, as
well as facilitating any possible future port to other TLS
libraries, if desired. It makes use of the previously
defined QCryptoTLSCreds object to access credentials to
use with the session. It also includes further unit tests
to validate the correctness of the TLS session handshake
and certificate validation. This is functionally equivalent
to the current TLS session handling code embedded in the
VNC server, and will obsolete it.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 15:07:43 +01:00
Daniel P. Berrange
9a2fd4347c crypto: add sanity checking of TLS x509 credentials
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.

This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.

It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.

Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 15:05:09 +01:00
Daniel P. Berrange
85bcbc789e crypto: introduce new module for TLS x509 credentials
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics

Example CLI configuration:

 $QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
               dir=/path/to/creds/dir,verify-peer=yes

The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use

 $QEMU -object tls-creds-x509,id=tls0,.... \
       -vnc 127.0.0.1:1,tls-creds=tls0

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-15 15:05:06 +01:00
Daniel P. Berrange
e00adf6c3e crypto: introduce new module for TLS anonymous credentials
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.

Simple example CLI configuration:

 $QEMU -object tls-creds-anon,id=tls0,endpoint=server

Example using pre-created diffie-hellman parameters

 $QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
               dir=/path/to/creds/dir

The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use

 $QEMU -object tls-creds-anon,id=tls0,.... \
       -vnc 127.0.0.1:1,tls-creds=tls0

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-15 15:00:20 +01:00
Daniel P. Berrange
a090187de1 crypto: introduce new base module for TLS credentials
Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.

If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.

The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.

The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 14:47:37 +01:00
Gerd Hoffmann
d531deef11 gtk: trace input grab reason
Add a reason to grab calls and trace points,
so it is easier to debug grab related ui issues.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-09-15 12:27:39 +02:00
Peter Maydell
7b9c09f7d4 xen-2015-09-10
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJV8bU4AAoJEIlPj0hw4a6QIuUP/2zKkoU+KAO1/V5f2WBTwzZc
 8X/t+yGMRaQS9ibWldg/kLJ+uqHt1O0XUDyoLFK03jfBd3bJDpGuVAKe39XQmNov
 y0f+ytGDtLCRglBw2jJT1tu29y3GbCXYxLKLj9vHEoCt4OEdh5xQlwK5ZkzT+SOF
 Qxnx+5rWMb3xnzxlfg354IJ0AGq1qZemkdhqwUJ66/mFKGRxjavn1cCqcb93tbMU
 UYKdEkoATRPRrTIhLepUnb3x3fMtlKgZJdqpVDQ3+mwXLGa2C31qJe1h/ac8HVCj
 1Rqj8h4va23LntOLS3AIYQcfDjDj1AQbfVKhpZzkYce3kPkXmJ+JwJ6CMQch0Bgw
 bD6q8/5sJ30Weyi0Yp+ZjVWH2LVXYguf1csPw510c+ZJIsYTDv+AxF63hVmmdp8G
 8B5YHhVMKkUtgrammdardjFBhl2XF+zn072RMh6KBAruI7YBAxo0hbRjoy2EWx0h
 Z93VgcBZ6n6iYNlxpQ8kNxbdnJXo4mgHMBTTe9aOkfXArvllrfJZIWsi5aScrqbb
 aP5RbFCoRWJVA2qOWywJL8W+rLtTK9244yuqwbhaxcBVw8/fH8VhJD2XxS7yozxS
 LZwoYO7pjLpqwfnnqtnXOVjWD7aVlEGKWQSe7EV9wIDPrSU/RpBhP09kIu1yCqgM
 Qki6v4d94v3S5Ounwl4n
 =7+ii
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' into staging

xen-2015-09-10

# gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"

* remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits)
  xen/pt: Don't slurp wholesale the PCI configuration registers
  xen/pt: Check for return values for xen_host_pci_[get|set] in init
  xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
  xen/pt: Make xen_pt_unregister_device idempotent
  xen/pt: Log xen_host_pci_get/set errors in MSI code.
  xen/pt: Log xen_host_pci_get in two init functions
  xen/pt: Remove XenPTReg->data field.
  xen/pt: Check if reg->init function sets the 'data' past the reg->size
  xen/pt: Sync up the dev.config and data values.
  xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
  xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.
  xen/pt/msi: Add the register value when printing logging and error messages
  xen: use errno instead of rc for xc_domain_add_to_physmap
  xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure
  xen/pt: Make xen_pt_msi_set_enable static
  xen/pt: Update comments with proper function name.
  xen/HVM: atomically access pointers in bufioreq handling
  xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting
  xen, gfx passthrough: add opregion mapping
  xen, gfx passthrough: register host bridge specific to passthrough
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-10 18:25:52 +01:00
Laszlo Ersek
0f288f854b hw/pci: fix pci_update_mappings() trace events
The current trace prototypes and (matching) trace calls lead to
"unorthodox" PCI BDF notation in at least the stderr trace backend. For
example, the four BARs of a QXL video card at 00:01.0 (bus 0, slot 1,
function 0) are traced like this (PID and timestamps removed):

  pci_update_mappings_add d=0x7f14a73bf890 00:00.1 0,0x84000000+0x4000000
  pci_update_mappings_add d=0x7f14a73bf890 00:00.1 1,0x80000000+0x4000000
  pci_update_mappings_add d=0x7f14a73bf890 00:00.1 2,0x88200000+0x2000
  pci_update_mappings_add d=0x7f14a73bf890 00:00.1 3,0xd060+0x20

The slot and function values are in reverse order.

Stick with the conventional BDF notation.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Don Koch <dkoch@verizon.com>
Cc: qemu-trivial@nongnu.org
Fixes: 7828d75045
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10 12:15:30 +03:00
Don Slutz
eeb6b13a5a xen-hvm: Add trace to ioreq
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
2015-09-08 15:20:20 +00:00
Jason J. Herne
0f5f669147 s390x: Enable new s390-storage-keys device
s390 guest initialization is modified to make use of new s390-storage-keys
device. Old code that globally allocated storage key array is removed.
The new device enables storage key access for kvm guests.

Cache storage key QOM objects in frequently used helper functions to avoid a
performance hit every time we use one of these functions.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-03 12:17:54 +02:00
Stefan Hajnoczi
cae98cb87d block/mirror: limit qiov to IOV_MAX elements
If mirror has more free buffers than IOV_MAX, preadv(2)/pwritev(2)
EINVAL failures may be encountered.

It is possible to trigger this by setting granularity to a low value
like 8192.

This patch stops appending chunks once IOV_MAX is reached.

The spurious EINVAL failure can be reproduced with a qcow2 image file
and the following QMP invocation:

  qmp.command('drive-mirror', device='virtio0', target='/tmp/r7.s1',
              granularity=8192, sync='full', mode='absolute-paths',
              format='raw')

While the guest is running dd if=/dev/zero of=/var/tmp/foo oflag=direct
bs=4k.

Cc: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435761950-26714-1-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
2015-08-06 04:41:09 -04:00
Fam Zheng
3b7031e960 milkymist-minimac2: Flush queued packets when link comes up
Drop .can_receive and move the semantics into minimac2_rx, by returning
0.

That is once minimac2_rx returns 0, incoming packets will be queued
until the queue is explicitly flushed. We do this when s->regs[R_STATE0]
or s->regs[R_STATE1] is changed in minimac2_write.

Also drop the unused trace point.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1436955553-22791-9-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-27 14:12:18 +01:00
Juan Quintela
df8961522a vmstate: Create optional sections
To make sections optional, we need to do it at the beggining of the code.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07 14:54:52 +02:00
Juan Quintela
df4b102452 migration: create new section to store global state
This includes a new section that for now just stores the current qemu state.

Right now, there are only one way to control what is the state of the
target after migration.

- If you run the target qemu with -S, it would start stopped.
- If you run the target qemu without -S, it would run just after migration finishes.

The problem here is what happens if we start the target without -S and
there happens one error during migration that puts current state as
-EIO.  Migration would ends (notice that the error happend doing block
IO, network IO, i.e. nothing related with migration), and when
migration finish, we would just "continue" running on destination,
probably hanging the guest/corruption data, whatever.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07 14:54:51 +02:00
Dr. David Alan Gilbert
e4d633207c Sort destination RAMBlocks to be the same as the source
Use the order of incoming RAMBlocks from the source to record
an index number; that then allows us to sort the destination
local RAMBlock list to match the source.

Now that the RAMBlocks are known to be in the same order, this
simplifies the RDMA Registration step which previously tried to
match RAMBlocks based on offset (which isn't guaranteed to match).

Looking at the existing compress code, I think it was erroneously
relying on an assumption of matching ordering, which this fixes.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-07-07 14:54:49 +02:00
Dr. David Alan Gilbert
03fcab3861 Allow rdma_delete_block to work without the hash
In the next patch we remove the hash on the destination,
rdma_delete_block does two things with the hash which can be avoided:
  a) The caller passes the offset and rdma_delete_block looks it up
     in the hash; fixed by getting the caller to pass the block
  b) The hash gets recreated after deletion; fixed by making that
     conditional on the hash being initialised.

While this function is currently only used during cleanup, Michael
asked that we keep it general for future dynamic block registration
work.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-07-07 14:54:48 +02:00
Dr. David Alan Gilbert
632e3a5cd8 Rework ram_control_load_hook to hook during block load
We need the names of RAMBlocks as they're loaded for RDMA,
reuse a slightly modified ram_control_load_hook:
  a) Pass a 'data' parameter to use for the name in the block-reg
     case
  b) Only some hook types now require the presence of a hook function.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-07-07 14:54:48 +02:00
Dr. David Alan Gilbert
4fb5364b90 Store block name in local blocks structure
In a later patch the block name will be used to match up two views
of the block list.  Keep a copy of the block name with the local block
list.

(At some point it could be argued that it would be best just to let
migration see the innards of RAMBlock and avoid the need to use
foreach).

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-07-07 14:54:47 +02:00
Dr. David Alan Gilbert
24ec68ef84 rdma typos
A couple of typo fixes.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-07-07 14:54:47 +02:00
Eric Auger
fb5f816499 hw/vfio/platform: add irqfd support
This patch aims at optimizing IRQ handling using irqfd framework.

Instead of handling the eventfds on user-side they are handled on
kernel side using
- the KVM irqfd framework,
- the VFIO driver virqfd framework.

the virtual IRQ completion is trapped at interrupt controller
This removes the need for fast/slow path swap.

Overall this brings significant performance improvements.

Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-07-06 12:15:14 -06:00
Kővágó, Zoltán
d95d7d802c ossaudio: use trace events instead of debug config flag
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15 12:42:48 +02:00
Kővágó, Zoltán
fbb7ef56d5 alsaaudio: use trace events instead of verbose
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15 12:42:48 +02:00
Peter Maydell
4cb618abc1 MIPS patches 2015-06-12
Changes:
 * improve dp8393x network card and rc4030 chipset emulation
 * support misaligned R6 and MSA memory accesses
 * support MIPS eXtended and Large Physical Addressing
 * add Config5.FRE bit and ERETNC instruction (Config5.LLB)
 * support ememsize on MALTA
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJVeppzAAoJEFIRjjwLKdprnk8H/1owSOreh0sMFbosvqlEhjXl
 lvjjuprWMdX+8M1JlaDvTbw6+LDB3Rihp3A6/I9A0GFiZaORmPzg7efULAI1H6ST
 0HfxMAO17eW+PJ3lvk0HidNDr01+RzTvwpizrHgQ9WJubJv0xREU+YG5yn1gPS4N
 aMMTKCAQFDba7iQQLKXUYvLz76+xyzW4VIvHVLx/SU86yPg9T7CwLpppipR8+zY5
 3BC4NUw/xLlS0LCYQGM8XmYgBiQ6lEAz/Y29bGlUg+LeYysjSgNSeoNbOs1M3kQp
 X0Hn7b28I1CjM2wZQ9GkT/ig+jhMvw27motnAe8vKood4ytfcor+dCCS13sE8fg=
 =F564
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150612' into staging

MIPS patches 2015-06-12

Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA

# gpg: Signature made Fri Jun 12 09:38:11 2015 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4  4FC0 5211 8E3C 0B29 DA6B

* remotes/lalrae/tags/mips-20150612: (29 commits)
  target-mips: enable XPA and LPA features
  target-mips: remove misleading comments in translate_init.c
  target-mips: add MTHC0 and MFHC0 instructions
  target-mips: add CP0.PageGrain.ELPA support
  target-mips: support Page Frame Number Extension field
  target-mips: extend selected CP0 registers to 64-bits in MIPS32
  target-mips: correct MFC0 for CP0.EntryLo in MIPS64
  net/dp8393x: fix hardware reset
  net/dp8393x: correctly reset in_use field
  net/dp8393x: add load/save support
  net/dp8393x: add PROM to store MAC address
  net/dp8393x: QOM'ify
  net/dp8393x: use dp8393x_ prefix for all functions
  net/dp8393x: do not use old_mmio accesses
  net/dp8393x: always calculate proper checksums
  dma/rc4030: convert to QOM
  dma/rc4030: use trace events instead of custom logging
  dma/rc4030: document register at offset 0x210
  dma/rc4030: do not use old_mmio accesses
  dma/rc4030: use AddressSpace and address_space_rw in users
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-12 12:49:40 +01:00
Dr. David Alan Gilbert
f796baa1b3 Split header writing out of qemu_savevm_state_begin
Split qemu_savevm_state_begin to:
  qemu_savevm_state_header   That writes the initial file header.
  qemu_savevm_state_begin    That sets up devices and does the first
                             device pass.

Used later in postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:54:01 +02:00
Juan Quintela
c3049a56d6 migration: move savevm.c inside migration/
Now, everything is in place.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-12 06:42:30 +02:00
Juan Quintela
56e93d26b8 migration: move ram stuff to migration/ram
For historic reasons, ram migration have been on arch_init.c.  Just
split it into migration/ram.c, the same that happened with block.c.

There is only code movement, no changes altogether.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-12 06:40:59 +02:00
Hervé Poussineau
95c357bc46 dma/rc4030: use trace events instead of custom logging
Remove also unneeded debug logs.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11 10:13:29 +01:00
Peter Maydell
0e12e61ff9 stdvga: factor out mmio subregion init
virtio-gpu: add virtio gpu core code, 2d mode
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJVd/1PAAoJEEy22O7T6HE4p8YP/3GsqlYsWtXsO0LfXFnYywk1
 1dAScMzc+zyHLPGe1/qkLuuMQVbu7wJ2wsd9Xr3QiJV8bkSIOx4MOGdP9kxe3puF
 W5D2mUo6mnY/5QYlEgvXMmUyQEswpq+h9/x9b4AjqQpKNoR3nJcGljPHadNrR8zR
 pyKeukFyJkoRu/AvBKvYCNKiSLLYSWgPGlo+ZD+dMMLtgUKvOCCJN3qyTZiqlGQs
 XPRzJ1s8inx8FN4+Qgq/Rk9fCtix0Vbg2rDi0WQtcSGWzXdDlm1uitYcmWmBo7v7
 vUFOJhd1IAuz/oh77QEVocFrf8bm8J7A/+xVbvcwTEXp3vEeuYTgnzpJ8mse7LTq
 Io61H3EWrnloYDmHe6DMHB42gTeUe2kJ9G4UwYEBnAXWGeNnvWTUrg6Gd/qAB/oF
 edXtVjOgTLnk3lainA6i1O+eJMb0b4nTTPDdi/TxWofBjXYSGMd8xbqTUAAO+B5I
 3lFN+vaOETa+8SAoihSGJHOg6q2oL9v8DcPJbeOOWt4jwE97Ug/HsPGiJclmS//b
 epyaEmNazTUgN6ovFp9seqaghiWVZ2sVOIiex/mCrOADZmsPJ8b0JE+qdw+eyqpf
 zY0mx35My+NyixFhLEkVhb7nJKnbKBWj1JdJYsMs746TB8wY1RNwXsFAri7lPlpr
 MXbM29NzWvz1dK5Eh+Fu
 =H5wW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20150610-1' into staging

stdvga: factor out mmio subregion init
virtio-gpu: add virtio gpu core code, 2d mode

# gpg: Signature made Wed Jun 10 10:03:11 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20150610-1:
  virtio-gpu/2d: add virtio gpu core code
  virtio: update headers, add virtio-gpu (2d)
  stdvga: factor out mmio subregion init
  stdvga: pass VGACommonState instead of PCIVGAState
  stdvga: fix offset in pci_vga_ioport_read

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-10 18:13:58 +01:00
Peter Maydell
3974c9d8cc fw_cfg: drop write support, qemu cmdline support, bugfixes.
bios-tables-test: fix smbios test.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJVd9lhAAoJEEy22O7T6HE41aEP/Avmt5hKB3h83U2BRAZRtta1
 s1CO6AqM94h/NiZlOInZIlH05fn87Aycp5HzyyGsl9Gjjve8/ZUNYYpbl5LPylq0
 Fbm8oOO1R3QjhOEnHCBO0WJStkzbk3U8lNNIO6xhhNFho3FgYkdGvNs1f81vG2iV
 gnCQBQI90BpqzMZA7Hr/5iAXgAmX0fo8gd/iN2LCX9rMpJfjZLCfKYzb5KaFu+Ha
 WI6gxFCLwrQz94P4hA8KsEGgGZv9C3ZEVCmRL0RDDCwTsI1VYfeQvUNwmWOumD9g
 kLEnIRj561hD+UV/b/kzpeLZw7QszluAm4aO8/0dmDvKi3/h19BIXFht3QB4BmEd
 1J4KbWYvWW2xBYe6OnpnGYs+xG9L+8qnYTNg/+/ng7Akev1nGBsccPwlOCijCojL
 jvTF7jCiQLPvGWM2ImRPwTxV09Ys644lJfoRQ8euy1yrpAKT8mAXGthKfLcprk1j
 MJ8GSmqJHKt71svtLqKquWcXX/IdK/ZTQdsAKUwffUKJ40iFpMjx2NLq22yZtoYj
 Gcec54acjf/Ej0rA09J8SG+jnEPFJqaVEAn3XcQZ99V5I3LOlOZoSy84/xjB0QTl
 bcJN4P8S3srgqIWN+j82VkjoL/D3qqYnJaEgB0LjMXiUkTbYHxJtL32sgYJhUOy/
 VDi6MmPkyrZHcyuTYbNs
 =ZUVk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-fw_cfg-20150610-1' into staging

fw_cfg: drop write support, qemu cmdline support, bugfixes.
bios-tables-test: fix smbios test.

# gpg: Signature made Wed Jun 10 07:29:53 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-fw_cfg-20150610-1:
  bios-tables-test: handle false-positive smbios signature matches
  fw_cfg: insert fw_cfg file blobs via qemu cmdline
  fw_cfg: prohibit insertion of duplicate fw_cfg file names
  fw_cfg: prevent selector key conflict
  fw_cfg: remove support for guest-side data writes
  fw_cfg: fix FW_CFG_BOOT_DEVICE update on ppc and sparc
  fw_cfg: add fw_cfg_modify_i16 (update) method
  QemuOpts: increase number of vm_config_groups

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-10 16:52:35 +01:00
Gerd Hoffmann
62232bf484 virtio-gpu/2d: add virtio gpu core code
This patch adds the core code for virtio gpu emulation,
covering 2d support.

Written by Dave Airlie and Gerd Hoffmann.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-10 11:02:00 +02:00
Gabriel L. Somlo
0eb973f915 fw_cfg: prohibit insertion of duplicate fw_cfg file names
Exit with an error (instead of simply logging a trace event)
whenever the same fw_cfg file name is added multiple times via
one of the fw_cfg_add_file[_callback]() host-side API calls.

Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-10 08:00:37 +02:00
Gabriel L. Somlo
023e314856 fw_cfg: remove support for guest-side data writes
From this point forward, any guest-side writes to the fw_cfg
data register will be treated as no-ops. This patch also removes
the unused host-side API function fw_cfg_add_callback(), which
allowed the registration of a callback to be executed each time
the guest completed a full overwrite of a given fw_cfg data item.

Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-10 08:00:37 +02:00
Eric Auger
38559979bf hw/vfio/platform: add irq assignment
This patch adds the code requested to assign interrupts to
a guest. The interrupts are mediated through user handled
eventfds only.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-08 09:25:26 -06:00
Eric Auger
0ea2730bef hw/vfio/platform: vfio-platform skeleton
Minimal VFIO platform implementation supporting register space
user mapping but not IRQ assignment.

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-08 09:25:25 -06:00
Alexey Kardashevskiy
d9d96a3cc7 spapr_iommu: Add separate trace points for PCI DMA operations
This is to reduce VIO noise while debugging PCI DMA.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:51 +02:00
Shannon Zhao
f5d8c8cd79 hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARM
Introduce a preliminary framework in virt-acpi-build.c with the main
ACPI build functions. It exposes the generated ACPI contents to
guest over fw_cfg.

The required ACPI v5.1 tables for ARM are:
- RSDP: Initial table that points to XSDT
- RSDT: Points to FADT GTDT MADT tables
- FADT: Generic information about the machine
- GTDT: Generic timer description table
- MADT: Multiple APIC description table
- DSDT: Holds all information about system devices/peripherals, pointed by FADT

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:54 +01:00
Zhu Guihua
bc09e06113 qmp-event: add event notification for memory hot unplug error
When memory hot unplug fails, this patch adds support to send
QMP event to notify mgmt about this failure.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-27 21:09:07 +02:00
Zhu Guihua
c06b2ffb02 acpi: add hardware implementation for memory hot unplug
- implements QEMU hardware part of memory hot unplug protocol
  described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-27 21:09:07 +02:00
David Hildenbrand
56dba22b7d s390x/kvm: trace all SIGP orders
This patch adds tracing code for all SIGP orders (including the destination
vcpu and the resulting condition code).

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-6-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
Peter Maydell
9c31a8219a Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  docs: add memory-hotplug.txt
  qemu-options.hx: improve -m description
  virtio-balloon: Add some trace events
  virtio-balloon: Fix balloon not working correctly when hotplug memory
  pc-dimm: add a function to calculate VM's current RAM size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-08 12:47:13 +00:00
zhanghailiang
6adfdc5a6a virtio-balloon: Add some trace events
Add some trace events for easier debugging

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-04 13:00:04 -05:00
Dr. David Alan Gilbert
ba79576185 unbreak dtrace tracing due to double _ in rdma names
It looks like the dtrace trace code gets upset if you have trace names
with __ in, which the migration/rdma.c code does.

Rename the functions and the associated traces.

Fixes: 733252deb8

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1424105885-12149-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-02 15:37:34 -06:00
Don Koch
15cae34009 Convert some debugging printfs to trace calls in pcnet.c.
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:20 +03:00
Don Koch
32c952498b Add/convert trace calls in pcnet-pci.c.
Add trace calls. Convert some #ifdef DEBUG printfs to trace.

Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:20 +03:00
Don Koch
5edab03d40 Add trace to ps2.c.
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:20 +03:00
Don Koch
91043dadc4 Add tracing to xenfb.
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:19 +03:00
Peter Lieven
95f7142abc virtio-blk: introduce multiread
this patch finally introduces multiread support to virtio-blk. While
multiwrite support was there for a long time, read support was missing.

The complete merge logic is moved into virtio-blk.c which has
been the only user of request merging ever since. This is required
to be able to merge chunks of requests and immediately invoke callbacks
for those requests. Secondly, this is required to switch to
direct invocation of coroutines which is planned at a later stage.

The following benchmarks show the performance of running fio with
4 worker threads on a local ram disk. The numbers show the average
of 10 test runs after 1 run as warmup phase.

              |        4k        |       64k        |        4k
MB/s          | rd seq | rd rand | rd seq | rd rand | wr seq | wr rand
--------------+--------+---------+--------+---------+--------+--------
master        | 1221   | 1187    | 4178   | 4114    | 1745   | 1213
multiread     | 1829   | 1189    | 4639   | 4110    | 1894   | 1216

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06 17:24:21 +01:00
Dr. David Alan Gilbert
733252deb8 Tracify migration/rdma.c
Turn all the D/DD/DDDPRINTFs into trace events
Turn most of the fprintf(stderr, into error_report

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-05 17:16:14 +01:00
Dr. David Alan Gilbert
a5df2a0222 Migration: Add lots of trace events
Mostly on the load side, so that when we get a complaint about
a migration failure we can figure out what it didn't like.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-05 17:16:14 +01:00
Peter Maydell
b00c92e3ef pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.  Also, beginning to generalize acpi build
 code for reuse by ARM.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUx465AAoJECgfDbjSjVRpzewIAI/tzV1oCR1D/YDYBYpiK68W
 85JJbyR90DpS9unjrkeUHEnJgkegCk8dMXlWJOlshpwxDw2khC2ol0yS6siwC6Z/
 1peL9E5zHz2H8KWfH6JlhqLETovZxjd5Uv3q1mWULvK+zZcPzeQDCky5I8mbEw4b
 0LGDGX8mcLlDnit9mnAbgHu7cbqGa0jtXoJTFveKdxQtHdyj4cAg0wCjOLhnEo6s
 fJP7K1TJ2Ptiwwlk2cnj8T4Z9AoJkWjpFfr94dST2KqR3z5j8OUZYYhifrZa3e8t
 qxO/UatY4IwSnsmWCn/hvzlHZFa03sc9nPIkAlj96j78sHqPafDJxCdnwlX8pF8=
 =Kfwr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.  Also, beginning to generalize acpi build
code for reuse by ARM.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 27 Jan 2015 13:12:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  pc-dimm: Add Error argument to pc_existing_dimms_capacity
  pc-dimm: Make pc_existing_dimms_capacity global
  pc: Fix DIMMs capacity calculation
  smbios: Don't report unknown CPU speed (fix SVVP regression)
  smbios: Fix dimm size calculation when RAM is multiple of 16GB
  bios-linker-loader: move source to common location
  bios-linker-loader: move header to common location
  virtio: fix feature bit checks
  bios-tables-test: split piix4 and q35 tests
  acpi: build_append_nameseg(): add padding if necessary
  acpi: update generated hex files
  acpi-test: update expected DSDT
  pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled
  pci: Split pcie_host_mmcfg_map()
  Add some trace calls to pci.c.
  ich9: add disable_s3, disable_s4, s4_val properties

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-27 13:17:30 +00:00
Don Koch
7828d75045 Add some trace calls to pci.c.
Signed-off-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-01-26 20:25:52 +02:00
Paul Durrant
3996e85c18 Xen: Use the ioreq-server API when available
The ioreq-server API added to Xen 4.5 offers better security than
the existing Xen/QEMU interface because the shared pages that are
used to pass emulation request/results back and forth are removed
from the guest's memory space before any requests are serviced.
This prevents the guest from mapping these pages (they are in a
well known location) and attempting to attack QEMU by synthesizing
its own request structures. Hence, this patch modifies configure
to detect whether the API is available, and adds the necessary
code to use the API if it is.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-01-20 14:24:10 +00:00
Eric Auger
e2c7d025ad hw/vfio: create common module
A new common module is created. It implements all functions
that have no device specificity (PCI, Platform).

This patch only consists in move (no functional changes)

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-22 09:54:51 -07:00
Eric Auger
df92ee4448 hw/vfio/pci: use name field in format strings
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-22 09:54:49 -07:00
Eric Auger
d13dd2d7a9 hw/vfio/pci: split vfio_get_device
vfio_get_device now takes a VFIODevice as argument. The function is split
into 2 parts: vfio_get_device which is generic and vfio_populate_device
which is bus specific.

3 new fields are introduced in VFIODevice to store dev_info.

vfio_put_base_device is created.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-22 09:54:38 -07:00
Eric Auger
a664477db8 hw/vfio/pci: Introduce VFIORegion
This structure is going to be shared by VFIOPCIDevice and
VFIOPlatformDevice. VFIOBAR includes it.

vfio_eoi becomes an ops of VFIODevice specialized by parent device.
This makes possible to transform vfio_bar_write/read into generic
vfio_region_write/read that will be used by VFIOPlatformDevice too.

vfio_mmap_bar becomes vfio_map_region

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-22 09:54:37 -07:00
Eric Auger
385f57cf9a vfio: migration to trace points
This patch removes all DPRINTF and replace them by trace points.
A few DPRINTF used in error cases were transformed into error_report.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-19 14:40:06 -07:00
Hannes Reinecke
7957ee71c7 megasas: Fixup MSI-X handling
MSI-X works slightly different than INTx; the doorbell
registers are not necessarily used as MSI-X interrupts
are directed anyway. So the head pointer on the
reply queue needs to be updated as soon as a frame
is completed, and we can set the doorbell only
when in INTx mode.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:29:01 +01:00
Hannes Reinecke
6df5718bd3 megasas: Rework frame queueing algorithm
Windows requires the frames to be unmapped, otherwise we run
into a race condition where the updated frame data is not
visible to the guest.
With that we can simplify the queue algorithm and use a bitmap
for tracking free frames.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:29:01 +01:00
Hannes Reinecke
aaf2a859b6 megasas: Update queue logging
Improve queue logging by displaying head and tail pointer
of the completion queue.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:29:01 +01:00
Hannes Reinecke
96f8f23a1e megasas: Ignore duplicate init_firmware commands
The windows driver is sending several init_firmware commands
when in MSI-X mode. It is, however, using only the first
queue. So disregard any additional init_firmware commands
until the HBA is reset.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:29:00 +01:00
Hannes Reinecke
8d72db68fe megasas: Clear unit attention on initial reset
The EFI firmware doesn't handle unit attentions properly,
so we need to clear the Power On/Reset unit attention upon
initial reset.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:29:00 +01:00
Hannes Reinecke
77bb6b1710 megasas: Decode register names
To ease debugging we should be decoding
the register names.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:29:00 +01:00
Hannes Reinecke
7bd908491c megasas: simplify trace event messages
The trace events already contain the function name, so the actual
message doesn't need to contain any of these informations.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:28:59 +01:00
Markus Armbruster
4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
David Hildenbrand
c9e659c9ee s390x/kvm: propagate s390 cpu state to kvm
Let QEMU propagate the cpu state to kvm. If kvm doesn't yet support it, it is
silently ignored as kvm will still handle the cpu state itself in that case.

The state is not synced back, thus kvm won't have a chance to actively modify
the cpu state. To do so, control has to be given back to QEMU (which is already
done so in all relevant cases).

Setting of the cpu state can fail either because kvm doesn't support the
interface yet, or because the state is invalid/not supported. Failed attempts
will be traced

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10 10:37:47 +02:00
David Hildenbrand
eb24f7c689 s390x/kvm: proper use of the cpu states OPERATING and STOPPED
This patch makes sure that halting a cpu and stopping a cpu are two different
things. Stopping a cpu will also set the cpu halted - this is needed for common
infrastructure to work (note that the stop and stopped flag cannot be used for
our purpose because they are already used by other mechanisms).

A cpu can be halted ("waiting") when it is operating. If interrupts are
disabled, this is called a "disabled wait", as it can't be woken up anymore. A
stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a
proper cpu state synchronization with the kvm part, we need to track the real
logical state of a cpu.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10 10:37:47 +02:00
Peter Maydell
81ab11a7a5 Usual mix of patches, the most important being Alex and Marcelo's
kvmclock fix.  This was reverted last minute for 2.1, but it is now back
 with the problematic case fixed.
 
 Note: I will soon switch to a subkey for signing purposes.  To verify
 future signed pull requests from me, please update my key with
 "gpg --recv-keys 9B4D86F2".  You should see 3 new subkeys---the
 one for signing will be a 2048-bit RSA key, 4E6B09D7.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUJXmEAAoJEBvWZb6bTYbyuZoP+gJScjcoHVL27YL6GqCsLzQ+
 swk/6TDaboR5+t3Tt1vHOWOvtXmoZlxp+sQU50ltiKS1mwRTsMAhEeTInTNPLJ6z
 aKX46QdvNib2bYdUgnl8nqOiKQAZiA6rR8os2lWJ3E8n1n6qBbeWwneQK2YvRaVf
 RMjmDm7sjhZt5h868O7SPNDSjk8k5TgYj5MOsDugFxQr6JXGxt8xmB+Ml6v6Ne+y
 ufDchXtBhANIkr1aNMeOBYdX+/wuY+fltjnG11xpuAL1a63F/b3EGvPoqUHQCZSd
 PzHmkSZV0z3rmgVTpcAHxSw2MxUEgmXLvxWAQTahrzGUi8mH3hF7z7zNqfULZWa1
 3hctUdlf9aWbIgdfEdBZqOjol58TYvgCjIa7W2upsvEf7sjctpCZnMmBi8vMM3FQ
 qv7S4139jN70+7zNY8CCnXPuOY63rsFTAs8XCPF7DL3HESzm7x8MEFgW7/7iJtwQ
 PNJVbJX8+FpDmdAy/fwkMKA8BvjmNBuIZrr9/IfFJ6uM70//brq3OXq25agToBpZ
 QYWW5CXYeQXurPBK1Q6XkGx61mNuc5zOveVS+8MhJKw9SiL/cIhQzrh3fgFtIP+e
 63LlufFPMA2+fhBJctptIoU9+XeUwalQic92ZqepuXB/OZV6vhhV9/K2zZMUMpl9
 B/Gg3cd1w5rMHg6O2kov
 =nP/e
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Usual mix of patches, the most important being Alex and Marcelo's
kvmclock fix.  This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.

Note: I will soon switch to a subkey for signing purposes.  To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2".  You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.

# gpg: Signature made Fri 26 Sep 2014 15:34:44 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream:
  kvm/valgrind: don't mark memory as initialized
  po: fix conflict with %.mo rule in rules.mak
  kvmvapic: fix migration when VM paused and when not running Windows
  serial: check if backed by a physical serial port at realize time
  serial: reset state at startup
  target-i386: update fp status fix
  hw/dma/i8257: Silence phony error message
  kvmclock: Ensure time in migration never goes backward
  kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
  Introduce cpu_clean_all_dirty
  pit: fix pit interrupt can't inject into vm after migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-26 15:41:50 +01:00
Alex Bennée
bc0d104c6a ohci: drop computed flags from trace events
This exceeded the trace argument limit for LTTNG UST and wasn't really
needed as the flags value is stored anyway. Dropping this fixes the
compile failure for UST. It can probably be merged with the previous
trace shortening patch.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26 09:43:06 +01:00
Alexey Kardashevskiy
3af8f177fa ohci: Split long traces to smaller ones
Recent traces rework introduced 2 tracepoints with 13 and 20
arguments. When dtrace backend is selected
(--enable-trace-backend=dtrace), compile fails as
sys/sdt.h defines DTRACE_PROBE up to DTRACE_PROBE12 only.

This splits long tracepoints.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26 09:43:06 +01:00
Markus Armbruster
40893768df trace-events: Fix comments pointing to source files
A few files have been renamed without updating their comment here.  A
few events have been added in the wrong place.  Clean that up.

Comments with no space after the '#' look ugly and confuse
cleanup-trace-events.pl.  Insert a space.

scripts/cleanup-trace-events.pl is now happy again.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411476811-24251-5-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26 09:34:39 +01:00
Markus Armbruster
4d249a2074 trace-events: Drop orphaned monitor trace event
Event monitor_protocol_event is unused since commit 7517517.  Drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411476811-24251-4-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26 09:34:38 +01:00
Markus Armbruster
8a55acb1e0 trace-events: Drop unused megasas trace event
Event megasas_io_read was added in commit e8f943c, but never used.
Drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411476811-24251-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26 09:34:38 +01:00
Stefan Hajnoczi
44e7ebb8bb trace-events: drop orphan iscsi trace events
iscsi_aio_write16_cb, iscsi_aio_writev, iscsi_aio_read16_cb, and
iscsi_aio_readv have not not been in use since commit
063c3378a9 ("block/iscsi: introduce
bdrv_co_{readv, writev, flush_to_disk}").

These were the only trace events in block/iscsi.c so drop the the
trace.h include.

Cc: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411394595-15300-4-git-send-email-stefanha@redhat.com
2014-09-26 09:34:38 +01:00
Stefan Hajnoczi
f4026f269a trace-events: drop orphan usb_mtp_data_out
This trace event was added in commit
840a178c94 ("usb: mtp filesharing") but
never used.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411394595-15300-3-git-send-email-stefanha@redhat.com
2014-09-26 09:34:38 +01:00
Stefan Hajnoczi
0bc375eb51 trace-events: drop orphan virtio_blk_data_plane_complete_request
This trace event has not been in use since commit
b002254dbd ("virtio-blk: Unify
{non-,}dataplane's request handlings").

Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411394595-15300-2-git-send-email-stefanha@redhat.com
2014-09-26 09:34:38 +01:00
Alexey Kardashevskiy
dc1f598845 ohci: Convert fprint/DPRINTF/print to traces
This converts many kinds of debug prints to traces.

This implements packets logging to avoid unnecessary calculations if
usb_ohci_td_pkt_short/usb_ohci_td_pkt_long is not enabled.

This makes OHCI errors (such as "DMA error") invisible by default.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:06 +02:00
Philipp Hahn
7dbb4c49bf hw/dma/i8257: Silence phony error message
Convert into trace event. Otherwise the message
	dma: unregistered DMA channel used nchan=0 dma_pos=0 dma_len=1
gets printed every time and fills up the log-file with 50 MiB / minute.

Signed-off-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16 12:35:02 +02:00
Gerd Hoffmann
30f1e661b6 console: stop using PixelFormat
With this patch the qemu console core stops using PixelFormat and pixman
format codes side-by-side, pixman format code is the primary way to
specify the DisplaySurface format:

 * DisplaySurface stops carrying a PixelFormat field.
 * qemu_create_displaysurface_from() expects a pixman format now.

Functions to convert PixelFormat to pixman_format_code_t (and back)
exist for those who still use PixelFormat.   As PixelFormat allows
easy access to masks and shifts it will probably continue to exist.

[ xenfb added by Benjamin Herrenschmidt ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-05 13:27:11 +02:00
Gonglei
d733f74c33 usb: add usb host adapters exit trace
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29 12:52:14 +02:00
Amit Shah
4ac4458076 virtio-rng: add some trace events
Add some trace events to virtio-rng for easier debugging

Signed-off-by: Amit Shah <amit.shah@redhat.com>

Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12 14:29:55 +01:00
Alex Bennée
6db8b53866 trace: add some tcg tracing support
This adds a couple of tcg specific trace-events which are useful for
tracing execution though tcg generated blocks. It's been tested with
lttng user space tracing but is generic enough for all systems. The tcg
events are:

  * translate_block - when a subject block is translated
  * exec_tb - when a translated block is entered
  * exec_tb_exit - when we exit the translated code
  * exec_tb_nocache - special case translations

Of course we can only trace the entrance to the first block of a chain
as each block will jump directly to the next when it can. See the -d
nochain patch to allow more complete tracing at the expense of
performance.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12 14:26:12 +01:00
Yang Zhiyong
bc78cff975 trace: add qemu_system_powerdown_request and qemu_system_shutdown_request trace events
We have the experience that the guest doesn't stop successfully
though it was instructed to shut down.

The root cause may be not in QEMU mostly.  However, QEMU is often
suspected at the beginning just because the issue occurred in
virtualization environment.

Therefore, we need to affirm that QEMU received the shutdown
request and raised ACPI irq from "virsh shutdown" command,
virt-manger or stopping QEMU process to the VM .
So that we can affirm the problems was belonged to the Guset OS
rather than the QEMU itself.

When we stop guests by "virsh shutdown" command or virt-manger,
or stopping QEMU process, qemu_system_powerdown_request() or
qemu_system_shutdown_request() is called. Then the below functions
in main_loop_should_exit() of Vl.c are called roughly in the
following order.

	if (qemu_powerdown_requested())
		qemu_system_powerdown()
			monitor_protocol_event(QEVENT_POWERDOWN, NULL)

	OR

	if(qemu_shutdown_requested()}
		monitor_protocol_event(QEVENT_SHUTDOWN, NULL);

The tracepoint of monitor_protocol_event() already exists, but no
tracepoints are defined for qemu_system_powerdown_request() and
qemu_system_shutdown_request(). So this patch adds two tracepoints for
the two functions. We believe that it will become much easier to
isolate the problem mentioned above by these tracepoints.

Signed-off-by: Yang Zhiyong <yangzy.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:56:13 +02:00
Alexey Kardashevskiy
9a321e9234 spapr_pci: Use XICS interrupt allocator and do not cache interrupts in PHB
Currently SPAPR PHB keeps track of all allocated MSI (here and below
MSI stands for both MSI and MSIX) interrupt because
XICS used to be unable to reuse interrupts. This is a problem for
dynamic MSI reconfiguration which happens when guest reloads a driver
or performs PCI hotplug. Another problem is that the existing
implementation can enable MSI on 32 devices maximum
(SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that.

This makes use of new XICS ability to reuse interrupts.

This reorganizes MSI information storage in sPAPRPHBState. Instead of
static array of 32 descriptors (one per a PCI function), this patch adds
a GHashTable when @config_addr is a key and (first_irq, num) pair is
a value. GHashTable can dynamically grow and shrink so the initial limit
of 32 devices is gone.

This changes migration stream as @msi_table was a static array while new
@msi_devs is a dynamic hash table. This adds temporary array which is
used for migration, it is populated in "spapr_pci"::pre_save() callback
and expanded into the hash table in post_load() callback. Since
the destination side does not know the number of MSI-enabled devices
in advance and cannot pre-allocate the temporary array to receive
migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro
which allocates the array automatically.

This resets the MSI configuration space when interrupts are released by
the ibm,change-msi RTAS call.

This fixed traces to be more informative.

This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which
was incorrect by accident. As the internal representation changed,
thus bumps migration version number.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:27 +02:00
Alexey Kardashevskiy
51bba713fe xics: Implement xics_ics_free()
This implements interrupt release function so IRQs can be returned back
to the pool for reuse in cases such as PCI hot plug.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:26 +02:00
Alexey Kardashevskiy
bee763dbfb spapr: Move interrupt allocator to xics
The current allocator returns IRQ numbers from a pool and does not
support IRQs reuse in any form as it did not keep track of what it
previously returned, it only keeps the last returned IRQ. Some use
cases such as PCI hot(un)plug may require IRQ release and reallocation.

This moves an allocator from SPAPR to XICS.

This switches IRQ users to use new API.

This uses LSI/MSI flags to know if interrupt is allocated.

The interrupt release function will be posted as a separate patch.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:26 +02:00
Igor Mammedov
2e1ac493f1 trace: pc: add PC_DIMM slot & address allocation
Add mhp_pc_dimm_assigned_slot & mhp_pc_dimm_assigned_address
events to trace which address and slot where assigned to
plugged in PC_DIMM device on target-i386 machine.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:50 +03:00
Igor Mammedov
dfe292ffc4 trace: add acpi memory hotplug IO region events
Add events for tracing accesses to memory hotplug IO ports.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:50 +03:00
Alexey Kardashevskiy
da95324ebe spapr_iommu: Enable multiple TCE requests
Currently only single TCE entry per request is supported (H_PUT_TCE).
However PAPR+ specification allows multiple entry requests such as
H_PUT_TCE_INDIRECT and H_STUFF_TCE. Having less transitions to the host
kernel via ioctls, support of these calls can accelerate IOMMU operations.

This implements H_STUFF_TCE and H_PUT_TCE_INDIRECT.

This advertises "multi-tce" capability to the guest if the host kernel
supports it (KVM_CAP_SPAPR_MULTITCE) or guest is running in TCG mode.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy
3794d5482d spapr: Implement processor compatibility in ibm, client-architecture-support
Modern Linux kernels support last POWERPC CPUs so when a kernel boots,
in most cases it can find a matching cpu_spec in the kernel's cpu_specs
list. However if the kernel is quite old, it may be missing a definition
of the actual CPU. To provide an ability for old kernels to work on modern
hardware, a Processor Compatibility Mode has been introduced
by the PowerISA specification.

>From the hardware prospective, it is supported by the Processor
Compatibility Register (PCR) which is defined in PowerISA. The register
enables one of the compatibility modes (2.05/2.06/2.07).
Since PCR is a hypervisor privileged register and cannot be
directly accessed from the guest, the mode selection is done via
ibm,client-architecture-support (CAS) RTAS call using which the guest
specifies what "raw" and "architected" CPU versions it supports.
QEMU works out the best match, changes a "cpu-version" property of
every CPU and notifies the guest about the change by setting these
properties in the buffer passed as a response on a custom H_CAS hypercall.

This implements ibm,client-architecture-support parameters parsing
(now only for PVRs) and cooks the device tree diff with new values for
"cpu-version", "ibm,ppc-interrupt-server#s" and
"ibm,ppc-interrupt-server#s" properties.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:38 +02:00
Alexey Kardashevskiy
2a6593cb6a spapr: Add ibm, client-architecture-support call
The PAPR+ specification defines a ibm,client-architecture-support (CAS)
RTAS call which purpose is to provide a negotiation mechanism for
the guest and the hypervisor to work out the best compatibility parameters.
During the negotiation process, the guest provides an array of various
options and capabilities which it supports, the hypervisor adjusts
the device tree and (optionally) reboots the guest.

At the moment the Linux guest calls CAS method at early boot so SLOF
gets called. SLOF allocates a memory buffer for the device tree changes
and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options,
composes a diff for the device tree, copies it to the buffer provided
by SLOF and returns to SLOF. SLOF updates the device tree and returns
control to the guest kernel. Only then the Linux guest parses the device
tree so it is possible to avoid unnecessary reboot in most cases.

The device tree diff is a header with an update format version
(defined as 1 in this patch) followed by a device tree with the properties
which require update.

If QEMU detects that it has to reboot the guest, it silently does so
as the guest expects reboot to happen because this is usual pHyp firmware
behavior.

This defines custom KVMPPC_H_CAS hypercall. The current SLOF already
has support for it.

This implements stub which returns very basic tree (root node,
no properties) to the guest.

As the return buffer does not contain any change, no change in behavior is
expected.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:37 +02:00
Alexey Kardashevskiy
98a8b52442 spapr: Add support for time base offset migration
This allows guests to have a different timebase origin from the host.

This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.

This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.

This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.

The feature must be present in the host kernel.

This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:35 +02:00
Dominik Dingel
4cb88c3c37 s390x/kvm: enable/reset cmma via vm attributes
Exploit the new api for userspace-controlled cmma. If supported, enable
cmma during kvm initialization and register a reset handler for cmma,
which is also called directly from the load IPL code.

The reset functionality is needed to reset the cmma state of the guest
pages, e.g. if a system reset is triggered via qemu monitor; otherwise
this could result in data corruption.

A guest triggered reboot may now lead to multiple cmma resets; this is
OK, however, as this is slowpath anyway and the simplest way to achieve
the intended effects.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-10 09:50:27 +02:00
Peter Maydell
82ea61c6da qtest: improve ehci/uhci test
usb: misc fixes, mostly for usb3/xhci
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjIziAAoJEEy22O7T6HE4HNMP/A9kbK49yK4o+/9tdemCsNnD
 KfDlt8K+NPnI1VzhOTOpbFN1ci5Oq1VQ0syw6uIwU5v8E0ZXKoS7uqIYKTx2rjfX
 w5tGSlK/gjYGLeN/VhbIOcELuBo2hdUDzYEpjdcUZ0L4xkKRVwoN30P292/KlRTu
 ZBOdaz4JlrGJRTUgb35GaVNhtSFAdIPNUHlzdyq+lJJuJq4quQh4mO3J/eQqRveJ
 EiLRKvc1FV4Z0tLZ3tzKemDYGJoA6conRCe+Xt+fmdlROm/037HjQ+/KqUyXKdFs
 hpYAj58bKrtIE9Dyo3MwD7/4R2XgkDYNGXeGlrGTgmkhwujme8vB/K57sqYlLnE1
 1iCf03gXd+Ap1zU7BTv+abFfuA/7SFnkIgs3+zU68UFfmiBKGDQgxLCnqGMWlari
 DpIf94T7ZLdNz6sc4FG4gQCP+aVJYTUjkjtunfJMfE/qz6Xb5BJQIPc3aHnAsqrb
 LG75rjJfS1rh1+SvNm7f46fC+7A9eKYOlbkbH8c3BQDCJkZyeWovnml4xIlLkvkg
 8xJB5UJVb4B4MKQW7Zi0hrDaN8/GVVyWymtt3Dl/I2iHBdV2Z/U+2/rFtLtZQ1zi
 oLl+ZteHaU3hnr5DNns3DuMSG33UT+o9gzaHsUldetwLiyGOiUC2i4P3xPD7fPID
 mJKO98266m9KMshEdw7k
 =4LqT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-8' into staging

qtest: improve ehci/uhci test
usb: misc fixes, mostly for usb3/xhci

# gpg: Signature made Mon 02 Jun 2014 15:40:34 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-8:
  xhci: order superspeed ports first
  xhci: make port reset trace point more verbose
  usb: add usb_pick_speed
  usb-host: add HAVE_STREAMS define
  usb-host: allow attaching usb3 devices to ehci
  usb: improve ehci/uhci test
  usb: move ehci register defines to header file
  usb: add uhci port status reserved bit
  usb: move uhci register defines to header file
  qtest: fix qpci_config_writel

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-02 17:07:21 +01:00
Gerd Hoffmann
4006617552 vnc: add trace events for key events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:29:01 +02:00
Gerd Hoffmann
7bd3055ffd xhci: make port reset trace point more verbose
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:29:00 +02:00
Peter Maydell
109519fd32 gtk: ui overhaul, multiwindow support.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTgvNPAAoJEEy22O7T6HE4jawQANUGoa3wgDawhjj3OGSw0Ik8
 OvcoVdGUXPYTDlBdd7165aNuQvcVobq+Ox2/ghkZozOUZWts4KUdshTNx7n51mrR
 tPDlsOwcowXuhJxwkykIbE2uT4cQ374l/G0gnpc6erV4MV5GVkm7FnBsZeCGKEBu
 +CMb8w6gWY6w7Q++BH8Sq0BBV7z+w3dIFpBRGrFgFWkBMdyRJRXCF3r9zqdkb39J
 RyoxRnwQXbzIfJx9suvSLiuXU2w7D6uQ2wQiprKlGW7MaxgDeSBihr1B6eyoT+VW
 2XEDcrY02AgwgCWkOSVDn4S/qWVoXv02o1sfWqyr4ADJNYMXaqwtuFtsI9q6F77M
 l8PmdJm8K8tkgsioAzrfcxkGZ17Yd3xZLL0pzRjOP/tsxhL0VdK/E286+Rg1Gl8w
 1rnNrZInWNm6JjQvzUc14+UVbcb8IGI5VbGmHulJxu3QovcxOkRffAbAvy+ESfRw
 q3kokMfO4eFTQ3xPL4lcoPajjaXlZ2nujkyA31XjNnMOYH0Ns7mU0W+hB5uaLWaS
 0FkmmmfNShhI5jy4dlI11DA9fIPDcEttzEgmkBr5FWft4Mz+/HjrS50CHnvL4MIA
 ma0TFgR7fgOkb1A/hS0CkqiYSIXS5CsJMKD/fNn0olLeqdaTpWpL5vF10Dh/hUPQ
 +GLzLmvcCGXsZUguJXpu
 =418E
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-gtk-7' into staging

gtk: ui overhaul, multiwindow support.

# gpg: Signature made Mon 26 May 2014 08:54:55 BST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* remotes/kraxel/tags/pull-gtk-7: (24 commits)
  gtk: workaround gtk2 vte resize issue
  gtk: window sizing overhaul
  gtk: zap unused global_state
  gtk: Add handling for the xfree86 keycodes
  gtk: enable untabify for gfx
  gtk: detached window pointer grabs
  gtk: update all windows on mouse mode changes
  gtk: fix grab checks
  gtk: update gd_update_caption
  gtk: skip keyboard grab when hover autograb is active
  gtk: keep track of grab owner
  gtk: add gd_grab trace event
  gtk: add tab to trace events
  gtk: allow moving tabs to windows and back.
  gtk: simplify resize
  gtk: use device type as label
  gtk: support multiple gfx displays
  gtk: move vga state into VirtualGfxConsole
  gtk: VirtualConsole restruction
  gtk: remove page numbering assumtions from the code
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-28 11:18:58 +01:00
Peter Maydell
4aa23452e3 input: add event routing and multiseat support.
input: misc bugfixes and minor improvements.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTguLNAAoJEEy22O7T6HE4d3MP/2+JYwz9ZiCuzBTriUDvMGpg
 ujCT5bk2Dcd3wHlrFfRX2saRxskcWstWrOuy6IwygSSpPRlqF67gLUqgByjAwFwJ
 g/JA4BGKrsFsI20XWkzB55e4FmbA+eixBEnDnuUHwvJebS1aCHNrb352E9nWFMne
 opsbpkCFkZULMXsqnELgsldqTaW0huSgdOFa0WsCPWi9rMdJL2SJjDvLgUlP4YVB
 v22AYSpZBd4TB+pSRxiUb2f4fVuAyaV5rCubJDKGLaKUuPZf3+2x664XuqYZ8RvI
 sOi6r2viamy7NuD9C6YOz2hwqeFj6A15viBo8KZmotAHB6/hi/3I0rLAQsRgxsGh
 zxNRHtOkF6n237KMWk7wh7SqGXtCr7mCe750bFru1W3FqlGlODAPYgIFODz1L50G
 51nlrXroFMkpM0FsLARtaeMoKo4k8e1o+08R9wVwkyNz+sPwlW7yoQKOlyWfmeKe
 GTTvRJWmggF3pqf6LEIQrgOQyBuArrX4SR1AeRzhYmw/H5h+Df7oeHAlv2Yx6Sus
 mAit/ExI9HeTE2BwyXCzu99LFAmogRvvB+45dbwC9INf537p9hdyKCyrFU1uQofw
 lw3cCfyNZu0BQR0YUpR2NCaFfWWkPQehi19kpKOpyiKscYy7RNJr10vaz9FuFppv
 x9nOKTuiaAMGIyJwWfmU
 =oPCg
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-9' into staging

input: add event routing and multiseat support.
input: misc bugfixes and minor improvements.

# gpg: Signature made Mon 26 May 2014 07:44:29 BST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* remotes/kraxel/tags/pull-input-9:
  docs: add multiseat.txt
  usb: add input routing support for tablet and keyboard
  sdl: pass key event source to input layer
  input: bind devices and input routing
  input: switch hid mouse and tablet to the new input layer api.
  input: switch hid keyboard to new input layer api.
  input: keymap: add meta keys
  input: add name to input_event_key_number
  input: add qemu_input_key_number_to_qcode
  input (curses): mask keycodes to remove modifier bits

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-28 10:33:05 +01:00
Gerd Hoffmann
2386a90730 input: add name to input_event_key_number
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:42:42 +02:00
Gerd Hoffmann
1c856da57b gtk: add gd_grab trace event
Input grab code is tricky, add some debug & trouble shooting aid.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:41:03 +02:00
Gerd Hoffmann
74444bc198 gtk: add tab to trace events
So you can see which of multiple displays (if present) was resized ;)

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:41:03 +02:00
Michael Walle
25156d1061 lm32: remove lm32_sys
Since we have now semihosting on the lm32 target, this device is no longer
needed. Remove it.

Signed-off-by: Michael Walle <michael@walle.cc>
2014-05-24 19:43:52 +02:00
Peter Maydell
5bc8f026dd Input code update:
- add keycode mapping helpers to core.
  - start switching devices to new input api.
  - misc bugfixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTdbOhAAoJEEy22O7T6HE4cbsP/RanYDHsykxfgrDpz5FRPtBl
 qRLJbHYNHicD9jzRyp4LoEpgT78An4OHMsnSWDxyglnJAY3wO8UxzjmSc6Si3bNb
 Yiy137u2lwhm7THX0wsR+PclLqzHxFatfSLttYomuTGBJmxAW9M3ivd2LNKd1S9/
 3sDXlZSE+nl4btyXLtHAgVPbD/l4Vpi0F3/0cV3v8DDeH4p0Wpgboxf9Kby3KXIa
 rvsLZyJ9Ast4bDP4JLHYLnU9SN4V26TY5maSg5ka8D5Ha1T8YNW8qHq7BKA2vbAY
 Ic2X9piHq2VAH9XB4wIpY7Vc4B8ZDJJflWplAZrt1D5FgHqyskGXPuHfELvPt1gW
 sNkMIB848oxplX+p6g8kE+ZvGGIn9IEUScu7gxfEHRNqkaGVLPd2fZaacTd/6yxZ
 mTMZ1t69TXrXv35NP5AJRfLg3mJEcY3+nfvKZCN1OZwjh8n91kKvND4eN0Smmg9R
 ntqQfNuFMucHpMFoaiCabzARmCl63iKZ1cis14pEKdfsWaAK3rAbZmf9E181ewSE
 Z4ns8Yhw2S7WGb+EhDuKODiDTqUG2doiEMsVDcofOpE9vI25Hb/QQ+5AaiHGrKa1
 Hh5rl3NJn0//AnVsgS5qu65X7/1KkZD93i4aCY09h46BEb0kzqKLr+Si6l92a3hn
 PrWY+YL8jiVEgNr94lOj
 =DqKI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-8' into staging

Input code update:
 - add keycode mapping helpers to core.
 - start switching devices to new input api.
 - misc bugfixes.

# gpg: Signature made Fri 16 May 2014 07:43:45 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-8:
  input: sparc32 kbd: claim en-us layout
  input: sparc32 kbd: fix some key mappings
  input: remove sparc keymap hack
  input: switch sparc32 kbd to new input api
  input: switch ps/2 mouse to new input api
  input: switch ps/2 kbd to new input api
  input: use KeyValue directly in sendkey monitor command
  input: add qemu_input_handler_deactivate
  input: key mapping helpers
  ps2: set ps/2 output buffer size as the same as kernel

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-19 12:53:07 +01:00
Peter Maydell
6a23082b4e Merge remote-tracking branch 'remotes/bonzini/scsi-next' into staging
* remotes/bonzini/scsi-next:
  [PATCH] block/iscsi: bump year in copyright notice
  block/iscsi: allow cluster_size of 4K and greater
  block/iscsi: clarify the meaning of ISCSI_CHECKALLOC_THRES
  block/iscsi: speed up read for unallocated sectors
  block/iscsi: allow fall back to WRITE SAME without UNMAP
  MAINTAINERS: mark megasas as maintained
  megasas: Add MSI support
  megasas: Enable MSI-X support
  megasas: Implement LD_LIST_QUERY
  scsi: Improve error messages more
  scsi-disk: Improve error messager if can't get version number

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-19 12:30:06 +01:00
Gerd Hoffmann
65e7545ea3 input: switch sparc32 kbd to new input api
Nasty 0xe0 logic is gone.  We map through QKeyCode now, giving us a
nice, readable mapping table.

Quick smoke test in OpenFirmware looks ok.  Careful check from arch
maintainers would be very nice, especially on the capslock and numlock
logic.  I'm not fully sure whenever I got it translated correctly and
also what it is supposed to do in the first place ...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-16 08:30:12 +02:00
Cornelia Huck
ada4135f84 kvm: make one_reg helpers available for everyone
s390x introduced helper functions for getting/setting one_regs with
commit 860643bc. However, nothing about these is s390-specific.

Alexey Kardashevskiy had already posted a general version, so let's
merge the two patches and massage the code a bit.

CC: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-13 13:11:08 +02:00
Gerd Hoffmann
1c76551fae usb: mtp: replace debug printfs with trace points
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-05 12:57:21 +02:00
Hannes Reinecke
4522b69c6c megasas: Add MSI support
Some hardware instances do support MSI, so we should do likewise.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28 13:51:13 +02:00
Hannes Reinecke
34bb4d02e0 megasas: Implement LD_LIST_QUERY
Newer firmware implement a LD_LIST_QUERY command, and due to a driver
issue no drives might be detected if this command isn't supported.
So add emulation for this command, too.

Cc: qemu-stable@nongnu.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28 13:48:41 +02:00
Christian Borntraeger
860643bc5a s390x/kvm: rework KVM synchronize to tracing for some ONEREGS
Some ONE_REGS on s390 are not protected by a capability. Older kernels
might not provide those and return an error. Fortunately these registers
are only critical for the migration path. There is no need to error out
on reset and normal runtime. Furthermore, these kernels don't provide
a proper dirty bitmap anyway, so let's use tracing for those errors.

Also provide generic one reg helper to simplify the code.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-04-25 12:59:57 +02:00
Gerd Hoffmann
840a178c94 usb: mtp filesharing
Implementation of a USB Media Transfer Device device for easy
filesharing.  Read-only.  No access control inside qemu, it will
happily export any file it is able to open to the guest, i.e.
standard unix access rights for the qemu process apply.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-23 10:28:14 +02:00
Gerd Hoffmann
e82597f6f8 input: fix input_event_key_number trace event
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-01 10:17:45 +02:00
Alexey Kardashevskiy
9013dca553 migration: add more traces
This replaces DPRINTF macro with tracepoints.

This moves some messages from migration.c to savevm.c.

This adds tracepoint to signal about fileds failed to migrate.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-03-27 15:19:00 +05:30
Paolo Bonzini
cc8c9d6c6f mirror: fix throttling delay calculation
The throttling delay calculation was using an inaccurate sector count to
calculate the time to sleep.  This broke rate-limiting for the block
mirror job.

Move the delay calculation into mirror_iteration() where we know how
many sectors were transferred.  This lets us calculate an accurate delay
time.

Reported-by: Joaquim Barrera <jbarrera@ac.upc.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-25 14:09:50 +01:00
Alexey Kardashevskiy
464400f6a5 migration: extend section_start/end traces
This adds @idstr to savevm_section_start and savevm_section_end
tracepoints.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-08 22:22:34 +01:00
Alexey Kardashevskiy
4fed9421e9 vl: add system_wakeup_request tracepoint
It might be useful for tracing migration.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-08 22:22:34 +01:00
Peter Maydell
6fc0303b95 Input handling rewrite.
SDL2 support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTFwd4AAoJEEy22O7T6HE4+JAP/jdPnsM8Vzf58mijlKix9Qks
 I/zMLn8Uri4o/cS/BeUZfXB9OetfgqwTDD2t351MSVLURSSFVU6krTj7MGnDr9o/
 NWkHSlG0J+Uoo7EF0cE9RGZEhNi4KUhbJ20Ku2S4xV3kyFSJh0wCzXWijOBZkbc5
 TAbcoUawSjq7mgK6gBqUU5C+JgACsoUohA9pWfj/f5UeQjzdFsNKVxpE7CzH4SX7
 xwl9S+wgnZk+EYQnKkL6A88lv5+8y0hPHTexsxNO5W6JaL0EQEAuTMCcjYCPMS4S
 QqOHVM+ffMVht4iN50mxi9kde7DpuLIKYbFOlWupmjpqE5j8yqzJ6eGk3pbZTrUj
 fcDauZ/+SbM/kwKV3bzm61AM5SoJb9nQ/Jf/MVs3ZdK8yRO4I1itQS6Q7I85Djs1
 BFGhSYEoPMWNiDzh2inTXCUn1wiBArLlfO0II34aCIYn6m8R38k3366YFDyH0P44
 WdnKOi6ZOxjoxoV6b4VFngysRn3c+L+5cea36mCJQZ2ykUtjFu3gLMEtUSz7guRx
 d0iA7BJVetQ2shbnopGQejRZnPusSzd5d0k9IwVPm9hmtcE8AJ9mfDaQPoKSPljv
 niG2INtu9OiNf6G6AqyKJQSREc9VX9AQ2chxQv4GiWjOBjGOi0uUF5uFeFwf8L8n
 NtZEC4K1oWa1Sa1562Td
 =8xIt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-4' into staging

Input handling rewrite.
SDL2 support.

# gpg: Signature made Wed 05 Mar 2014 11:16:08 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-4: (38 commits)
  ui/sdl2 : initial port to SDL 2.0 (v2.0)
  console: add QemuUIInfo
  console: add head to index to qemu consoles.
  input: remove index_from_keycode (no users)
  input: move do_mouse_set to new core
  input: move qmp_query_mice to new core
  input: add input_mouse_mode tracepoint
  input: move mouse mode notifier to new core
  input-legacy: remove kbd_mouse_event
  input-legacy: remove kbd_mouse_is_absolute
  input-legacy: remove kbd_mouse_has_absolute
  input-legacy: remove kbd_put_keycode
  input: trace events
  input: mouse: switch cocoa ui to new core
  input: keyboard: switch cocoa ui to new core
  input: mouse: switch monitor to new core
  input: mouse: switch spice ui to new core
  input: mouse: switch vnc ui to new core
  input: mouse: switch sdl ui to new core
  input: mouse: switch gtk ui to new core
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-07 18:29:33 +00:00
Peter Maydell
bb2b045034 Patch queue for ppc - 2014-03-05
This pull request includes:
 
   - VSX emulation support
   - book3s pr/hv selection
   - some bug fixes
   - qdev stable numbering
   - eTSEC emulation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJTFoh7AAoJECszeR4D/txgZkQQAIBNHeYN96PR0JWziEig9a3i
 ByOC+ug2x6KH5RPy/plMFG00W8AnDt0fYO+zQebvu/stJbQtSGRA5fdOiKbRGer/
 7p0XUpeGWHTPULvgNBWrZKYbC36GOPtFvYyYShzS7oLQOhufNdbzP6Br41Lr816m
 4UdGjcItmn/WOron0TpL+yBJA1UIK6n6bmJqtDk+N3kyDSQ9XauBJoZ9yRBSRgp7
 ToabDa5lLcA7u9QLIT1b0AuTKEW+Opq8bSRwCQQDpfd9UDxLoX60pvsO8oupvu/6
 yLwiaYIdc336nI0R4jjXwgBCUacSCBubIAI0bm5xw91JH7Jo7G2i2g01ok5VfelG
 /ljzwcjcanDFYr04NfOEK1pmQhULSDyOBKDs8ZUNfiwjoGMM0+ZVmqPY8VPyTVRB
 TxViS2Fm0cnymcfBarAaP2gVJBmqZF29QMQl7KgwbkNYrn5+WM3XcOEham/hTN2+
 Q5dhiVBuWQBILKPV09SrijpEV1iNVVvJ3UNyMoQ9Ngb0MypHN3siw9X8b0rx6Dsi
 O2SxiUKowVyK7BfTai53Pep+ep8Zo6lAzXFGh1CHtEMhyme+p07FXZrh9mgPsdZU
 5C1jKzTMZDEcibmFGj/Jb52RmXVGHWpalh4OBaqRv3kooU8eEL0e0f2wRvLAGLrD
 J4firKDdB/CIPvatLD0a
 =a6Q/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging

Patch queue for ppc - 2014-03-05

This pull request includes:

  - VSX emulation support
  - book3s pr/hv selection
  - some bug fixes
  - qdev stable numbering
  - eTSEC emulation

# gpg: Signature made Wed 05 Mar 2014 02:14:19 GMT using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream: (130 commits)
  target-ppc: spapr: e500: fix to use cpu_dt_id
  target-ppc: add PowerPCCPU::cpu_dt_id
  target-ppc: Introduce hypervisor call H_GET_TCE
  target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab
  target-ppc: Change the hpte store API
  target-ppc: Fix page table lookup with kvm enabled
  target-ppc: Fix htab_mask calculation
  target-ppc: Use Additional Temporary in stqcx Case
  target-ppc: Fix Compiler Warnings Due to 64-Bit Constants Declared as UL
  PPC: sPAPR: Only use getpagesize() when we run with kvm
  target-ppc/translate.c: Use ULL suffix for 64 bit constants
  spapr-vlan: flush queue whenever can_receive can go from false to true
  target-ppc: Altivec 2.07: Vector Permute and Exclusive OR
  target-ppc: Altivec 2.07: Vector SHA Sigma Instructions
  target-ppc: Altivec 2.07: AES Instructions
  target-ppc: Altivec 2.07: Binary Coded Decimal Instructions
  target-ppc: Altivec 2.07: Vector Polynomial Multiply Sum
  target-ppc: Altivec 2.07: Vector Gather Bits by Bytes
  target-ppc: Altivec 2.07: Doubleword Compares
  target-ppc: Altivec 2.07: vbpermq Instruction
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-07 16:36:38 +00:00
Gerd Hoffmann
a8dfb1c34f input: add input_mouse_mode tracepoint
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:04 +01:00
Gerd Hoffmann
c43ce5512f input: trace events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:03 +01:00
Cornelia Huck
7e7494627f s390x/virtio-ccw: Adapter interrupt support.
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host->guest notifications will be handled
via global_indicator -> queue indicators instead of queue indicators +
subchannel I/O interrupt. Indicators for virtqueues may be present at an
offset.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-05 09:42:05 +01:00
Laurent Dufour
a0fcac9c21 target-ppc: Introduce hypervisor call H_GET_TCE
This patch introduces the hypervisor call H_GET_TCE which is basically the
reverse of H_PUT_TCE, as defined in the Power Architecture Platform
Requirements (PAPR).

The hcall H_GET_TCE is required by the kdump kernel which is calling it to
retrieve the TCE set up by the panicing kernel.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05 03:07:03 +01:00
Alexey Kardashevskiy
b36f100e17 PPC: KVM: suppress warnings about not supported SPRs
PR KVM lacks support of many SPRs in set/get one register API but it does
really break PR KVM. So convert them to switchable traces for now.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05 03:06:45 +01:00
Peter Maydell
c2cb92f9ea Several features, fixes and cleanups for kvm/s390:
- sclp event facility: cleanup structure. This allows to use
   realize/unrealize   as well as migration support via vmsd
 - reboot: Two fixes that make reboot much more reliable
 - ipl: make elf loading more robust
 - flic interrupt controller: This allows to migrate floating
   interrupts, as well as clear them on reset etc.
 - enable async_pf feature of KVM on s390
 - several sclp fixes and cleanups
 - several sigp fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTDwZVAAoJEBF7vIC1phx8lx4P/Rv+UVD9XDFFF8yHuye1am40
 NpRGjdarQ/9QUkS4gqyKwYUvIjAClk5id7U2d5zrfdc8XC49AH0ZhVFMdRupaOon
 AUqXjOXD5zAh9bfUcewg1EK1P1VuKcp0hyh0jFlIqk9Xmidw8N5guQ6iBoTqGJD5
 UYTp0PuSqIjY1RCuF4fCTCurzRd1+J2oKcQBip7BSWlVuWZlg2/hPxoIraLezlz2
 huwOU9tkSGXwSRv4C6fCcukEwlqnvkE6W0MCrHrcb2T8xYwAR2Jjs0TsscbKxb+t
 lIjZRiCxBrFwOLUqGN8DMYtZPffR+cigZ5bYb4o3PPJ0DQL4vLQVd8SPMPrdJhbb
 M7UOaeTclSTQuzmM/Uuc1pmrFc8PDq0dg50dT3weH2bW8aSgyqutYGpmUcm1Q6kq
 JLFuyswOBr1vS9o0TlBunP4+TqJJrnGvtIQ4EbRZm7zP78mBaIIrUcAZlbgOI+XI
 cSjtFXkBOCz0j28J9GSHrsWMC7RQ179TGdcH/FjDpu0dNDOxH7eH5gZPQoQDAqwC
 SjstqJdIFnd0qxOB1EqcgMUxbSqQYq3hoGvJ644ZrMA3T5trBn0fSw3J9ZU/qAK7
 EvOKRacMfcacIj4l0aEQgpwqVmktwIYnkfetX/QAKw/4AImJz/R9GRkmYgjCfOH8
 /CUfXM71zWLEdv1o5uJ5
 =toIt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' into staging

Several features, fixes and cleanups for kvm/s390:

- sclp event facility: cleanup structure. This allows to use
  realize/unrealize   as well as migration support via vmsd
- reboot: Two fixes that make reboot much more reliable
- ipl: make elf loading more robust
- flic interrupt controller: This allows to migrate floating
  interrupts, as well as clear them on reset etc.
- enable async_pf feature of KVM on s390
- several sclp fixes and cleanups
- several sigp fixes and cleanups

* remotes/borntraeger/tags/kvm-s390-20140227: (22 commits)
  s390x/ipl: Fix crash of ELF images with arbitrary entry points
  s390x/kvm: Rework priv instruction handlers
  s390x/kvm: Add missing SIGP CPU RESET order
  s390x/kvm: Rework SIGP INITIAL CPU RESET handler
  s390x/cpu: Use ioctl to reset state in the kernel
  s390-ccw.img: new binary rom to match latest fixes
  s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css
  s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx
  s390x/event-facility: exploit realize/unrealize
  s390x/event-facility: add support for live migration
  s390x/event-facility: code restructure
  s390x/event-facility: some renaming
  s390x/sclp: Fixed setting of condition code register
  s390x/sclp: Add missing checks to SCLP handler
  s390x/sclp: Fixed the size of sccb and code parameter
  s390x/eventfacility: mask out commands
  s390x/virtio-hcall: Specification exception for illegal subcodes
  s390x/virtio-hcall: Add range check for hypervisor call
  s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler
  s390x/async_pf: Check for apf extension and enable pfault
  ...

Conflicts:
	linux-headers/linux/kvm.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04 14:50:46 +00:00
Jens Freimann
3a553fc658 s390x/kvm: implement floating-interrupt controller device
This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27 09:51:25 +01:00
Christoffer Dall
0a6a7ccaae kvm: Common device control API functions
Introduces two simple functions:
    int kvm_device_ioctl(int fd, int type, ...);
    int kvm_create_device(KVMState *s, uint64_t type, bool test);

These functions wrap the basic ioctl-based interactions with KVM in a
way similar to other KVM ioctl wrappers.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-4-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26 17:20:00 +00:00
Kevin Wolf
94783de6fe trace-events: Fix typo in "offset"
s/offet/offset/

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-19 11:14:08 +01:00
Hu Tao
16f0587e0a qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset()
n_start can be actually calculated from offset. The number of
sectors to be allocated(n_end - n_start) can be passed in in
num. By removing n_start and n_end, we can save two parameters.

The side effect is there is a bug in qcow2.c:preallocate() that
passes incorrect n_start to qcow2_alloc_cluster_offset() is
fixed. The bug can be triggerred by a larger cluster size than
the default value(65536), for example:

./qemu-img create -f qcow2 \
  -o 'cluster_size=131072,preallocation=metadata' file.img 4G

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09 09:12:39 +01:00
Gerd Hoffmann
5319dc7b42 usb: add support for microsoft os descriptors
This patch adds support for special usb descriptors used by microsoft
windows.  They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.

As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-01-16 12:59:59 +01:00
Anthony Liguori
93531372f0 Merge remote-tracking branch 'stefanha/block' into staging
# By Paolo Bonzini (17) and others
# Via Stefan Hajnoczi
* stefanha/block: (48 commits)
  qemu-iotests: filter QEMU monitor \r\n
  aio: make aio_poll(ctx, true) block with no fds
  block: clean up bdrv_drain_all() throttling comments
  qcow2: use start_of_cluster() and offset_into_cluster() everywhere
  qemu-img: decrease progress update interval on convert
  qemu-img: round down request length to an aligned sector
  qemu-img: dynamically adjust iobuffer size during convert
  block/iscsi: set bs->bl.opt_transfer_length
  block: add opt_transfer_length to BlockLimits
  block/iscsi: set bdi->cluster_size
  qemu-img: fix usage instruction for qemu-img convert
  qemu-img: add support for skipping zeroes in input during convert
  qemu-nbd: add doc for option -f
  qemu-iotests: add test for snapshot in qemu-img convert
  qemu-img: add -l for snapshot in convert
  qemu-iotests: add 058 internal snapshot export with qemu-nbd case
  qemu-nbd: support internal snapshot export
  snapshot: distinguish id and name in load_tmp
  qemu-iotests: Split qcow2 only cases in 048
  qemu-iotests: Clean up spaces in usage output
  ...

Message-id: 1386347807-27359-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-07 07:35:31 -08:00
Anthony Liguori
e679f05248 Improvements for usb3 bulk stream (usb core, xhci).
Bugfixes for uas emulation.
 Add remote wakeup support for ehci.
 Add suspend support for xhci.
 Misc minor tweaks and fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSmEXxAAoJEEy22O7T6HE47t0QALonQORRj0IUAH0cOdfAhlQ3
 tGMQksBCYevBatKt4iZQgkw6H0jwse6QfsgsG2dfznEO+ZWsrt9cxe1UrqxbK2PN
 2PY/I9Ke1iP6tjcf9ftjqt+mZcAg/FHrbua5hb8zXRQnqu2jr0y3Cp7k2Jax4j4d
 Zl2FJ+sd4lGNR3Qpb85Muxtii8XERmMqvAit72VN4VAW4iE+SQAFSOgzBC512b55
 wLVc6DrbnM8I4AVJQ8RH2pMQau0/aBHFbU8By2RKbymkJmIG2nFqLH6eSJ19QgzY
 CmX8yGDJM5LGAGRZCeDSeuilxFU/WCSoTtkL8cPcYUv4cSTm+forzxhVz+CVOeVu
 JJsWNkaIxu4mxfRyADjUKkWoKX7ACro3ErfAWHdv8hwuhZ4uD6cf2++nXVDK9dq4
 yLL2nR4YG0NTOdQNKrsUbltf9gC5cWqNRgVMJ5VfqIBGtjXdTbpGpcUEFuDDegjk
 GhfN8lcpqgnFj0U4fAGLxHYXHvJRpNeWzEEANPuEYnWr2tSrgBWKkYLaooTDHt5r
 FUE6lmKL+BzQYnXfWWqh1fZoiBzzrMaT3OkHc2vx/SrGLuO/rVWTzXsFQI+NGPHp
 XxuyocFoKZA2yGr9h6eBBp9mtd5y0oOVxBR0WbkgvmbyxkX7Zq9r2PSoDOm26oE3
 5kmApAnSij83aT06Qe8P
 =2yvC
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kraxel/tags/pull-usb-1' into staging

Improvements for usb3 bulk stream (usb core, xhci).
Bugfixes for uas emulation.
Add remote wakeup support for ehci.
Add suspend support for xhci.
Misc minor tweaks and fixes.

# gpg: Signature made Thu 28 Nov 2013 11:44:49 PM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

# By Hans de Goede (11) and others
# Via Gerd Hoffmann
* kraxel/tags/pull-usb-1:
  usb: move usb_{hi,lo} helpers to header file.
  usb: add vendor request defines
  trace-events: Clean up after removal of old usb-host code
  Revert "usb-tablet: Don't claim wakeup capability for USB-2 version"
  ehci: implement port wakeup
  xhci: Call usb_device_alloc/free_streams
  usb: Add usb_device_alloc/free_streams
  usb: Add max_streams attribute to endpoint info
  uas: s/ui/iu/
  uas: Fix response iu struct definition
  uas: Bounds check tags when using streams
  uas: Streams are numbered 1-y, rather then 0-x
  uas: Fix / cleanup usb_uas_task error handling
  uas: Only use report iu-s for task_mgmt status reporting
  scsi: Add 2 new sense codes needed by uas
  xhci: add support for suspend/resume
  xhci: Add a few missing checks for disconnected devices

Message-id: 1385712381-30918-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06 12:54:36 -08:00
Paolo Bonzini
260a82e524 raw-posix: implement write_zeroes with MAY_UNMAP for files
Writing zeroes to a file can be done by punching a hole if
MAY_UNMAP is set.

Note that in this case ENOTSUP is not ignored, but makes
the block layer fall back to the generic implementation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03 15:26:49 +01:00
Paolo Bonzini
d5ef94d43d block: add bdrv_aio_write_zeroes
This will be used by the SCSI layer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03 15:26:49 +01:00
Paolo Bonzini
94d6ff21f4 block: add flags argument to bdrv_co_write_zeroes tracepoint
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03 15:26:49 +01:00
Stefan Weil
ef0dd982cb gtk: Replace conditional debug messages by trace methods
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02 21:02:00 +04:00
Stefan Weil
5d28b0e960 console: Replace conditional debug messages by trace methods
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02 21:02:00 +04:00
Markus Armbruster
904c063039 trace-events: Clean up after removal of old usb-host code
Commit b5613fd neglected to drop the trace events along with the code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-28 15:39:27 +01:00
Gerd Hoffmann
e489df40ca ehci: implement port wakeup
Update portsc register and raise irq in case a suspended
port is woken up, so remote wakeup works on our ehci ports.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-28 15:39:27 +01:00
Anthony Liguori
2e6ae666c8 Merge remote-tracking branch 'mjt/trivial-patches' into staging
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  tests/.gitignore: ignore test-throttle
  exec: Fix broken build for MinGW (regression)
  kvm: Fix compiler warning (clang)
  tcg-sparc: Fix parenthesis warning
  Makefile: Remove some more files when cleaning
  target-i386: Fix segment cache dump
  iov: avoid "orig_len may be used unitialized" warning
  vscclient: remove unnecessary use of uninitialized variable
  trace-events: Clean up with scripts/cleanup-trace-events.pl again
  tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
  *-user: Improve documentation for lock_user function
  MAINTAINERS: Add missing entry to filelist for TCI target
  translate-all: Fix formatting of dump output
  *-user: Fix typo in comment (ulocking -> unlocking)
  docs: Fix IO port number for CPU present bitmap.
  q35: Fix typo in constant DEFUALT -> DEFAULT.
  configure: Undefine _FORTIFY_SOURCE prior using it

Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
2013-09-23 11:52:55 -05:00
Markus Armbruster
ddd0bd480f trace-events: Clean up with scripts/cleanup-trace-events.pl again
Event qxl_render_blit_guest_primary_initialized is unused since commit
c58c7b9, drop it.

Commit 42e5b4c moved hw/ppc/xics.c to hw/intc/xics.c without updating
the comment in trace-events.

"scripts/cleanup-trace-events.pl trace-events | diff trace-events" is
now clean again.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-20 20:09:24 +04:00
Alexey Kardashevskiy
4fe6e9ecb7 kvm: fix traces to use %x instead of %d
KVM request types are normally defined using hex constants but QEMU traces
print decimal values instead, which is not very convenient.

This changes the request type format from %d to %x.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-20 12:37:52 +02:00
Gerd Hoffmann
18b203850a qxl: trace io port name
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:08 +02:00
Anthony Liguori
9ea0f58fc7 Merge remote-tracking branch 'kraxel/usb.88' into staging
# By Gerd Hoffmann (10) and Marcel Apfelbaum (1)
# Via Gerd Hoffmann
* kraxel/usb.88:
  usb/dev-hid: Modified usb-tablet category from Misc to Input
  Revert "usb-hub: report status changes only once"
  usb-hub: add tracepoint for status reports
  usb: parallelize usb3 streams
  uas: add property for request logging
  xhci: reset port when disabling slot
  xhci: emulate intr endpoint intervals correctly
  xhci: fix endpoint interval calculation
  xhci: add port to slot_address tracepoint
  xhci: add tracepoint for endpoint state changes
  xhci: remove leftover debug printf

Message-id: 1378117055-29620-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:31:30 -05:00
Anthony Liguori
9889e04ac1 pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
 and a virtio bugfix for level interrupts.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
 hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
 pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
 hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
 l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
 r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
 =SytJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pc,pci,virtio fixes and cleanups

This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  virtio_pci: fix level interrupts with irqfd
  pc: reduce duplication, fix PIIX descriptions
  hw: Clean up bogus default boot order
  pci: add config space access traces
  pc: fix regression for 64 bit PCI memory
  pci: Introduce helper to retrieve a PCI device's DMA address space

Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:31:07 -05:00
Gerd Hoffmann
b8cbc1374a usb-hub: add tracepoint for status reports
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02 11:06:20 +02:00
Gerd Hoffmann
65d81ed402 xhci: add port to slot_address tracepoint
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02 11:06:19 +02:00
Gerd Hoffmann
1c82392a15 xhci: add tracepoint for endpoint state changes
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02 11:06:19 +02:00
Alexey Kardashevskiy
7e472264e9 PPC: spapr: iommu: rework traces
This converts old style fprintf to traces.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: change patch subject]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02 10:06:43 +02:00
Alexey Kardashevskiy
3bf4dfdd11 pci: add config space access traces
This adds pci_cfg_read and pci_cfg_write traces for config spaces
accesses.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-28 10:11:23 +03:00
Paolo Bonzini
55d5d04884 memory: add tracepoints for MMIO reads/writes
This is quite handy to debug softmmu targets.

Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1375016242-32651-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:10 -05:00
Paul Durrant
8fbab3b62a Xen PV Device
Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-07-29 11:13:44 +00:00
Markus Armbruster
3ba00637d0 trace-events: Fix up source file comments
They're all wrong since (at least) Paolo's big source tree
reorganization.  Need to shuffle some event declarations around to
keep them under the correct source file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-18 11:44:42 +08:00
Markus Armbruster
3ae76d23d2 trace-events: Drop unused events
Dropped event                           Unused since
mirror_cow                              884fea4
paio_complete                           47e6b25
paio_cancel                             47e6b25
usb_ehci_data                           0ce668b
megasas_qf_dequeue                      never used
megasas_handle_frame                    never used
megasas_io_continue                     never used
megasas_iovec_map_failed                never used
megasas_dcmd_map_failed                 never used
milkymist_softusb_mouse_event           4c15ba9
xen_map_block                           6506e4f
xen_unmap_block                         6506e4f
qemu_spice_start                        67be672
qemu_spice_stop                         67be672

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-18 11:44:42 +08:00
Chegu Vinod
7ca1dfad95 Force auto-convegence of live migration
If a user chooses to turn on the auto-converge migration capability
these changes detect the lack of convergence and throttle down the
guest. i.e. force the VCPUs out of the guest for some duration
and let the migration thread catchup and help converge.

Verified the convergence using the following :
 - Java Warehouse workload running on a 20VCPU/256G guest(~80% busy)
 - OLTP like workload running on a 80VCPU/512G guest (~80% busy)

Sample results with Java warehouse workload : (migrate speed set to 20Gb and
migrate downtime set to 4seconds).

 (qemu) info migrate
 capabilities: xbzrle: off auto-converge: off  <----
 Migration status: active
 total time: 1487503 milliseconds
 expected downtime: 519 milliseconds
 transferred ram: 383749347 kbytes
 remaining ram: 2753372 kbytes
 total ram: 268444224 kbytes
 duplicate: 65461532 pages
 skipped: 64901568 pages
 normal: 95750218 pages
 normal bytes: 383000872 kbytes
 dirty pages rate: 67551 pages

 ---

 (qemu) info migrate
 capabilities: xbzrle: off auto-converge: on   <----
 Migration status: completed
 total time: 241161 milliseconds
 downtime: 6373 milliseconds
 transferred ram: 28235307 kbytes
 remaining ram: 0 kbytes
 total ram: 268444224 kbytes
 duplicate: 64946416 pages
 skipped: 64903523 pages
 normal: 7044971 pages
 normal bytes: 28179884 kbytes

Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-12 20:35:08 +02:00
Dietmar Maurer
98d2c6f2cd block: add basic backup support to block driver
backup_start() creates a block job that copies a point-in-time snapshot
of a block device to a target block device.

We call backup_do_cow() for each write during backup. That function
reads the original data from the block device before it gets
overwritten.  The data is then written to the target device.

Currently backup cluster size is hardcoded to 65536 bytes.

[I made a number of changes to Dietmar's original patch and folded them
in to make code review easy.  Here is the full list:

 * Drop BackupDumpFunc interface in favor of a target block device
 * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes()
 * Use 0 delay instead of 1us, like other block jobs
 * Unify creation/start functions into backup_start()
 * Simplify cleanup, free bitmap in backup_run() instead of cb
 * function
 * Use HBitmap to avoid duplicating bitmap code
 * Use bdrv_getlength() instead of accessing ->total_sectors
 * directly
 * Delete the backup.h header file, it is no longer necessary
 * Move ./backup.c to block/backup.c
 * Remove #ifdefed out code
 * Coding style and whitespace cleanups
 * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks
 * Keep our own in-flight CowRequest list instead of using block.c
   tracked requests.  This means a little code duplication but is much
   simpler than trying to share the tracked requests list and use the
   backup block size.
 * Add on_source_error and on_target_error error handling.
 * Use trace events instead of DPRINTF()

-- stefanha]

Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:26 +02:00
Anthony Liguori
fd469df97a Merge remote-tracking branch 'bonzini/iommu-for-anthony' into staging
# By Paolo Bonzini (11) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
  memory: clean up phys_page_find
  memory: populate FlatView for new address spaces
  memory: limit sections in the radix tree to the actual address space size
  s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62
  memory: fix address space initialization/destruction
  memory: make memory_global_sync_dirty_bitmap take an AddressSpace
  memory: do not duplicate memory_region_destructor_none
  memory: Rename readable flag to romd_mode
  memory: Replace open-coded memory_region_is_romd
  memory: allow memory_region_find() to run on non-root memory regions
  memory: assert that PhysPageEntry's ptr does not overflow
  exec: eliminate stq_phys_notdirty
  exec: make qemu_get_ram_ptr private
  exec: eliminate qemu_put_ram_ptr
  exec: remove obsolete comment

Message-id: 1369414987-8839-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-24 13:47:42 -05:00
Paolo Bonzini
4f39178b3a exec: eliminate qemu_put_ram_ptr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24 18:42:19 +02:00
Stefan Hajnoczi
02ffb50448 coroutine: stop using AioContext in CoQueue
qemu_co_queue_next(&queue) arranges that the next queued coroutine is
run at a later point in time.  This deferred restart is useful because
the caller may not want to transfer control yet.

This behavior was implemented using QEMUBH in the past, which meant that
CoQueue (and hence CoMutex and CoRwlock) had a dependency on the
AioContext event loop.  This hidden dependency causes trouble when we
move to a world with multiple event loops - now qemu_co_queue_next()
needs to know which event loop to schedule the QEMUBH in.

After pondering how to stash AioContext I realized the best solution is
to not use AioContext at all.  This patch implements the deferred
restart behavior purely in terms of coroutines and no longer uses
QEMUBH.

Here is how it works:

Each Coroutine has a wakeup queue that starts out empty.  When
qemu_co_queue_next() is called, the next coroutine is added to our
wakeup queue.  The wakeup queue is processed when we yield or terminate.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-24 16:17:56 +02:00
Hervé Poussineau
da4c1a7a85 osdep: fix qemu_anon_ram_free trace (+ fix compilation on 32 bit hosts)
Commit e7a09b92b7 added a trace at each
memory freeing, but unfortunately inverted size and pointer when printing
them. Fix trace.

This also led to a compilation error on 32 bit hosts:
In file included from include/trace.h:4:0,
                 from trace/generated-events.c:3:
./trace/generated-tracers.h: In function ‘trace_qemu_anon_ram_free’:
./trace/generated-tracers.h:64:9: error: format ‘%zu’ expects argument of type
‘size_t’, but argument 3 has type ‘void *’ [-Werror=format]
./trace/generated-tracers.h:64:9: error: format ‘%p’ expects argument of type
‘void *’, but argument 4 has type ‘size_t’ [-Werror=format]

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1369045989-14016-1-git-send-email-hpoussin@reactos.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-20 08:20:08 -05:00
Paolo Bonzini
e7a09b92b7 osdep: introduce qemu_anon_ram_free to free qemu_anon_ram_alloc-ed memory
We switched from qemu_memalign to mmap() but then we don't modify
qemu_vfree() to do a munmap() over free().  Which we cannot do
because qemu_vfree() frees memory allocated by qemu_{mem,block}align.

Introduce a new function that does the munmap(), luckily the size is
available in the RAMBlock.

Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-14 08:53:31 -05:00
Paolo Bonzini
6eebf958ab osdep, kvm: rename low-level RAM allocation functions
This is preparatory to the introduction of a separate freeing API.

Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-14 08:53:31 -05:00
Paolo Bonzini
fa131d94a5 qom: trace asserting casts
This provides a way to detect the cast that leads to a (reproducible)
crash even when QOM cast debugging is disabled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-13 09:52:06 -05:00
Kazuya Saito
b76ac80a5c kvm-all: add kvm_run_exit tracepoint
This patch enable us to know exit reason of KVM_RUN. It will help us
know where the trouble is caused.

Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03 13:58:09 +02:00
Kazuya Saito
9c7757290c kvm-all: add kvm_ioctl, kvm_vm_ioctl, kvm_vcpu_ioctl tracepoints
This patch adds tracepoints at ioctl to kvm. Tracing these ioctl is
useful for clarification whether the cause of troubles is qemu or kvm.

Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03 13:58:08 +02:00
Hervé Poussineau
6e860b5db4 pvscsi: fix compilation on 32 bit hosts
This fixes the following error:
In file included from qemu/include/trace.h:4:0,
                 from trace/generated-events.c:3:
./trace/generated-tracers.h: In function ‘trace_pvscsi_get_sg_list’:
./trace/generated-tracers.h:4271:9: error: format ‘%lu’ expects argument of
type ‘long unsigned int’, but argument 4 has type ‘size_t’ [-Werror=format]

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-01 21:00:20 +04:00
Gerd Hoffmann
3b7e759a41 usb: better speed mismatch error reporting
Report the supported speeds for device and port in the error message.
Also add the speeds to the tracepoint.  And while being at it drop
the redundant error message in usb_desc_attach, usb_device_attach will
report the error anyway.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-23 08:43:10 +02:00
Dmitry Fleytman
881d588a98 scsi: VMWare PVSCSI paravirtual device implementation
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
  pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19 10:44:17 +02:00
Anthony Liguori
86c7dba0d0 Merge remote-tracking branch 'kraxel/usb.80' into staging
# By Gerd Hoffmann (6) and Hans de Goede (1)
# Via Gerd Hoffmann
* kraxel/usb.80:
  use libusb for usb-host
  xhci: fix address device
  xhci: use slotid as device address
  xhci: fix portsc writes
  xhci: add xhci_cap_write
  xhci: remove leftover debug printf
  usb-serial: Remove double call to qemu_chr_add_handlers( NULL )

Message-id: 1366107190-30853-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-16 10:28:58 -05:00
Gerd Hoffmann
2b2325ff64 use libusb for usb-host
Reimplement usb-host on top of libusb.
Reasons to do this:

 (1) Largely rewritten from scratch, nice opportunity to kill historical
     cruft.
 (2) Offload usbfs handling to libusb.
 (3) Have a single portable code base instead of bsd + linux variants.
 (4) Bring usb-host support to any platform supported by libusbx.

For now this goes side-by-side to the existing code.  That is only to
simplify regression testing though, at the end of the day I want remove
the old code and support libusb exclusively.  Merge early in 1.5 cycle,
remove the old code after 1.5 release or something like this.

Thanks to qdev the old and new code can coexist nicely on linux.  Just
use "-device usb-host-linux" to use the old linux driver instead of the
libusb one (which takes over the "usb-host" name).

The bsd driver isn't qdev'ified so it isn't that easy for bsd.
I didn't bother making it runtime switchable, so you have to rebuild
qemu with --disable-libusb to get back the old code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16 12:04:09 +02:00
Gerd Hoffmann
bdfce20df1 xhci: fix portsc writes
Check for port reset first and skip everything else then.
Add sanity checks for PLS updates.
Add PLC notification when entering PLS_U0 state.

This gets host-initiated port resume going on win8.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16 11:59:08 +02:00
Gerd Hoffmann
0f7b2864d0 console: gui timer fixes
Make gui update rate adaption code in gui_update() actually work.
Sprinkle in a tracepoint so you can see the code at work.  Remove
the update rate adaption code in vnc and make vnc simply use the
generic bits instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16 09:03:49 +02:00
Gerd Hoffmann
437fe1061b console: add trace events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16 09:03:47 +02:00
Gerd Hoffmann
eb2f9b024d hw/vmware_vga.c: various vmware vga fixes.
Hardcode depth to 32 bpp.  It effectively was that way before because
that is the default surface depth, this just makes it explicit in the
code.

Rename depth to new_depth to make it consistent with the new_width +
new_height names.  In theory we can make new_depth changeable (i.e.
allow the guest to fill in -- say -- 16 there).  In practice the guests
don't try, the X-Server refuses to start if you ask it to use 16bpp
depth (via DefaultDepth in the Screen section).

Always return the correct rmask+gmask+bmask values for the given
new_depth.

Fix mode setting to also verify at new_depth to make sure we have a
correct DisplaySurface, even if the current video mode happes to be
16bpp (set by vgabios via bochs vbe interface).  While being at it
switch over to use qemu_create_displaysurface_from, so the surface is
backed by guest-visible video memory and we save a memcpy.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16 09:03:47 +02:00
Gerd Hoffmann
7a6404cd8b hw/vmware_vga.c: add tracepoints for mmio reads+writes
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16 09:03:47 +02:00
Gerd Hoffmann
0ab966cfcc xhci: remove unimplemented printfs
Replace them with a tracepoint, so they don't spam stderr by default.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-03 09:55:49 +02:00
Anthony Liguori
fde245ca7e Merge remote-tracking branch 'stefanha/block' into staging
# By Kevin Wolf (22) and Peter Lieven (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
  block: Fix direct use of protocols as driver for bdrv_open()
  qcow2: Gather clusters in a looping loop
  qcow2: Move cluster gathering to a non-looping loop
  qcow2: Allow requests with multiple l2metas
  qcow2: Use byte granularity in qcow2_alloc_cluster_offset()
  qcow2: Prepare handle_alloc/copied() for byte granularity
  qcow2: handle_copied(): Implement non-zero host_offset
  qcow2: handle_copied(): Get rid of keep_clusters parameter
  qcow2: handle_copied(): Get rid of nb_clusters parameter
  qcow2: Factor out handle_copied()
  qcow2: Clean up handle_alloc()
  qcow2: Finalise interface of handle_alloc()
  qcow2: handle_alloc(): Get rid of keep_clusters parameter
  qcow2: handle_alloc(): Get rid of nb_clusters parameter
  qcow2: Factor out handle_alloc()
  qcow2: Decouple cluster allocation from cluster reuse code
  qcow2: Change handle_dependency to byte granularity
  qcow2: Improve check for overlapping allocations
  qcow2: Handle dependencies earlier
  qcow2: Remove bogus unlock of s->lock
  ...
2013-03-28 12:57:37 -05:00
Kazuya Saito
7e8660032c vl: add runstate_set tracepoint
This patch enables us to know RunState transition. It will be userful
for investigation when the trouble occured in special event such like
live migration, shutdown, suspend, and so on.

Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28 14:20:58 +01:00
Kevin Wolf
0af729ec00 qcow2: Factor out handle_copied()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28 11:52:43 +01:00
Kevin Wolf
10f0ed8b2f qcow2: Factor out handle_alloc()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28 11:52:43 +01:00
Gerd Hoffmann
da229ef3b3 console: rework DisplaySurface handling [vga emu side]
Decouple DisplaySurface allocation & deallocation from DisplayState.
Replace dpy_gfx_resize + dpy_gfx_setdata with a dpy_gfx_replace_surface
function.

This handles the graphic hardware emulation.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18 10:21:58 +01:00
Gerd Hoffmann
7c20b4a374 console: fix displaychangelisteners interface
Split callbacks into separate Ops struct.  Pass DisplayChangeListener
pointer as first argument to all callbacks.  Uninline a bunch of
display functions and move them from console.h to console.c

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18 10:21:58 +01:00
Stefan Hajnoczi
b811203cf2 threadpool: move globals into struct ThreadPool
Move global variables into a struct so multiple thread pools can be
supported in the future.

This patch does not change thread-pool.h interfaces.  There is still a
global thread pool and it is not yet possible to create/destroy
individual thread pools.  Moving the variables into a struct first makes
later patches easier to review.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15 16:07:50 +01:00
Gerd Hoffmann
4524051c32 Add search path support for qemu data files.
This patch allows to specify multiple directories where qemu should look
for data files.  To implement that the behavior of the -L switch is
slightly different now:  Instead of replacing the data directory the
path specified will be appended to the data directory list.  So when
specifiying -L multiple times all directories specified will be checked,
in the order they are specified on the command line, instead of just the
last one.

Additionally the default paths are always appended to the directory
data list.  This allows to specify a incomplete directory (such as the
seabios out/ directory) via -L.  Anything not found there will be loaded
from the default paths, so you don't have to create a symlink farm for
all the rom blobs.

For trouble-shooting a tracepoint has been added, logging which blob
has been loaded from which location.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1362739344-8068-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12 13:42:28 -05:00
Kazuya Saito
c09e5bb1d8 migration: add migrate_set_state tracepoint
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11 13:32:01 +01:00
Paolo Bonzini
6f6710aa99 scsi: do not call scsi_read_data/scsi_write_data for a canceled request
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05 17:51:51 +01:00
Gerd Hoffmann
024426acc0 usb-xhci: usb3 streams
Add streams support to the xhci emulation.  No secondary streams yet,
only linear stream arays are supported for now.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19 13:17:48 +01:00
Cornelia Huck
a5cf2bb4e3 s390: Add new channel I/O based virtio transport.
Add a new virtio transport that uses channel commands to perform
virtio operations.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29 21:50:04 +01:00
Cornelia Huck
df1fe5bb49 s390: Virtual channel subsystem support.
Provide a mechanism for qemu to provide fully virtual subchannels to
the guest.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29 21:50:04 +01:00
Cornelia Huck
7b18aad543 s390: Add channel I/O instructions.
Provide handlers for (most) channel I/O instructions.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29 21:50:04 +01:00
Paolo Bonzini
884fea4e87 mirror: support arbitrarily-sized iterations
Yet another optimization is to extend the mirroring iteration to include more
adjacent dirty blocks.  This limits the number of I/O operations and makes
mirroring efficient even with a small granularity.  Most of the infrastructure
is already in place; we only need to put a loop around the computation of
the origin and sector count of the iteration.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:35 +01:00
Paolo Bonzini
402a47411b mirror: support more than one in-flight AIO operation
With AIO support in place, we can start copying more than one chunk
in parallel.  This patch introduces the required infrastructure for
this: the buffer is split into multiple granularity-sized chunks,
and there is a free list to access them.

Because of copy-on-write, a single operation may already require
multiple chunks to be available on the free list.

In addition, two different iterations on the HBitmap may want to
copy the same cluster.  We avoid this by keeping a bitmap of in-flight
I/O operations, and blocking until the previous iteration completes.
This should be a pretty rare occurrence, though; as long as there is
no overlap the next iteration can start before the previous one finishes.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:35 +01:00
Paolo Bonzini
bd48bde8f0 mirror: switch mirror_iteration to AIO
There is really no change in the behavior of the job here, since
there is still a maximum of one in-flight I/O operation between
the source and the target.  However, this patch already introduces
the AIO callbacks (which are unmodified in the next patch)
and some of the logic to count in-flight operations and only
complete the job when there is none.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:34 +01:00
Paolo Bonzini
b812f6719c mirror: perform COW if the cluster size is bigger than the granularity
When mirroring runs, the backing files for the target may not yet be
ready.  However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros.  Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying).  So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.

However, we want to lower the granularity for efficiency, so we need
a better solution.  The solution is to always copy a whole cluster the
first time it is touched.  The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:33 +01:00
Paolo Bonzini
8f0720ecbc block: implement dirty bitmap using HBitmap
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.

Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:33 +01:00
Paolo Bonzini
e7c033c3fa add hierarchical bitmap data type and test cases
HBitmaps provides an array of bits.  The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.

In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level.  When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).

Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):

     bits 0-57 => word in the last bitmap     | bits 58-63 => bit in the word
     bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
     bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word

So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits.  To move down, you shift the index left
similarly, and add the word index within the group.  Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.

Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.

When iterating on a bitmap, each bit (on any level) is only visited
once.  Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps.  Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:32 +01:00
Alon Levy
e0ac6097b6 qxl: stop using non revision 4 rom fields for revision < 4
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-22 11:01:06 +01:00
Markus Armbruster
089da572b9 fw_cfg: Use void *, size_t instead of uint8_t *, uint32_t for blobs
Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB.  Clean it
up anyway.  Size overflow now fails assertions.

Bonus: saves a whole bunch of silly casts.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-19 10:22:44 +00:00
Markus Armbruster
f6e3534327 fw_cfg: Replace debug prints by tracepoints
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-19 10:22:39 +00:00
Andreas Färber
63e3555e80 Merge branch 'master' of git://git.qemu.org/qemu into prep-up
Conflicts:
	hw/Makefile.objs
	hw/ppc_prep.c

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-01-10 21:52:28 +01:00
Gerd Hoffmann
89eb147c2c uhci: stop using portio lists
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-08 10:56:58 +01:00
Stefan Hajnoczi
e72f66a0a2 dataplane: add virtio-blk data plane code
virtio-blk-data-plane is a subset implementation of virtio-blk.  It only
handles read, write, and flush requests.  It does this using a dedicated
thread that executes an epoll(2)-based event loop and processes I/O
using Linux AIO.

This approach performs very well but can be used for raw image files
only.  The number of IOPS achieved has been reported to be several times
higher than the existing virtio-blk implementation.

Eventually it should be possible to unify virtio-blk-data-plane with the
main body of QEMU code once the block layer and hardware emulation is
able to run outside the global mutex.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:47 +01:00
Stefan Hajnoczi
88807f89d9 dataplane: add virtqueue vring code
The virtio-blk-data-plane cannot access memory using the usual QEMU
functions since it executes outside the global mutex and the memory APIs
are this time are not thread-safe.

This patch introduces a virtqueue module based on the kernel's vhost
vring code.  The trick is that we map guest memory ahead of time and
access it cheaply outside the global mutex.

Once the hardware emulation code can execute outside the global mutex it
will be possible to drop this code.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:55:47 +01:00
Marc-André Lureau
5a49d3e9a7 spice-qemu-char: add spiceport chardev
Add a new spice chardev to allow arbitrary communication between the
host and the Spice client via the spice server.

Examples:

This allows the Spice client to have a special port for the qemu
monitor:

... -chardev spiceport,name=org.qemu.monitor,id=monitorport
    -mon chardev=monitorport

v2:
- remove support for chardev to chardev linking
- conditionnaly compile with SPICE_SERVER_VERSION

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-17 14:01:41 +01:00
David Gibson
500efa2319 pseries: Add tracepoints to the XICS interrupt controller
This patch adds tracing / debugging calls to the XICS interrupt controller
implementation used on the pseries machine.

Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14 13:12:54 +01:00
Gerd Hoffmann
8c908fca58 usb-host: update tracing
Now that we have separate status and length fields in USBPacket
update the completion tracepoint to log both.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-16 11:27:32 +01:00
Gerd Hoffmann
55903f1d2d ehci: handle dma errors
Starting with commit 1c380f9460 dma
transfers can actually fail.  This patch makes ehci keep track
of the busmaster bit in pci config space, by setting/clearing the
dma_context pointer.  Attempts to dma without context will result
in raising HSE (Host System Error) interrupt and stopping the host
controller.

This patch fixes WinXP not booting with a usb stick attached to ehci.
Root cause is seabios activating ehci so you can boot from the stick,
and WinXP clearing the busmaster bit before resetting the host
controller, leading to ehci actually trying dma while it is disabled.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-16 11:27:32 +01:00
Alon Levy
511aefb0c6 hw/qxl: qxl_send_events: nop if stopped
Added a trace point for easy logging.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=870972

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-05 11:49:22 +01:00
Anthony Liguori
de0a36cd01 Merge remote-tracking branch 'kraxel/usb.69' into staging
* kraxel/usb.69: (31 commits)
  usb-redir: Allow redirecting super speed devices to high speed controllers
  usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
  usb-redir: Use reject rather the disconnect on bad ep info
  usb-redir: Add an usbredir_setup_usb_eps() helper function
  usb-redir: Add support for input pipelining
  usb-redir: Add support for 32 bits bulk packet length
  combined-packet: Add a workaround for Linux usbfs + live migration
  usb: Add packet combining functions
  uhci: Don't crash on device disconnect
  uhci: Add a uhci_handle_td_error() helper function
  usb/ehci-pci: add helper to create ich9 usb controllers
  usb/ehci-pci: add ich9 00:1a.* variant
  usb/ehci-pci: dynamic type generation
  uhci: add ich9 00:1a.* variants
  uhci: stick irq routing info into UHCIInfo too.
  uhci: dynamic type generation
  xilinx_zynq: add USB controllers
  usb/ehci: add sysbus variant
  usb/ehci: split into multiple source files
  usb/ehci: Guard definition of EHCI_DEBUG
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-01 14:34:13 -05:00
Gerd Hoffmann
4f47f0f82e xhci: add port trace points
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01 13:10:09 +01:00
Paolo Bonzini
f563a5d7a8 Merge remote-tracking branch 'origin/master' into threadpool
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-31 10:42:51 +01:00
Paolo Bonzini
d354c7eccf aio: add generic thread-pool facility
Add a generic thread-pool.  The code is roughly based on posix-aio-compat.c,
with some changes, especially the following:

- use QemuSemaphore instead of QemuCond;

- separate the state of the thread from the return code of the worker
function.  The return code is totally opaque for the thread pool;

- do not busy wait when doing cancellation.

A more generic threadpool (but still specific to I/O so that in the future
it can use special scheduling classes or PI mutexes) can have many uses:
it allows more flexibility in raw-posix.c and can more easily be extended
to Win32, and it will also be used to do an msync of the persistent bitmap.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-31 10:37:48 +01:00
Anthony Liguori
6b0e6468e3 Merge remote-tracking branch 'kraxel/usb.68' into staging
* kraxel/usb.68: (36 commits)
  xhci: fix usb name in caps
  xhci: make number of interrupters and slots configurable
  xhci: allow disabling interrupters
  xhci: flush endpoint context unconditinally
  xhci: fix function name in error message
  uhci: Use only one queue for ctrl endpoints
  uhci: Retry to fill the queue while waiting for td completion
  uhci: Always mark a queue valid when we encounter it
  uhci: When the guest marks a pending td non-active, cancel the queue
  uhci: Detect guest td re-use
  uhci: Verify queue has not been changed by guest
  uhci: Immediately free queues on device disconnect
  uhci: Store ep in UHCIQueue
  uhci: Make uhci_fill_queue() actually operate on an UHCIQueue
  uhci: Add uhci_read_td() helper function
  uhci: Rename UHCIAsync->td to UHCIAsync->td_addr
  uhci: Move emptying of the queue's asyncs' queue to uhci_queue_free
  uhci: Drop unnecessary forward declaration of some static functions
  uhci: Don't retry on error
  uhci: cleanup: Add an unlink call to uhci_async_cancel()
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-29 10:34:29 -05:00
Hans de Goede
66a08cbe6a uhci: Verify queue has not been changed by guest
According to the spec a guest can unlink a qh, and then as soon as frindex
has changed by 1 since the unlink, assume it is idle and re-use it. However
for various reasons, we cannot simply consider a qh as unlinked if we've not
seen it for 1 frame. This means that it is possible for a guest to re-use /
restart the queue while we still see its old state. This patch adds a safety
check for this, and "early" retires queues when they were changed by the guest.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-25 09:08:11 +02:00
Paolo Bonzini
893f7ebafe mirror: introduce mirror job
This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background.  This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program.  It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.

The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.

The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.

In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source.  (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).

It is not yet possible to complete the job and switch over to the target
disk.  The next patches will fix this and add many refinements to the
basic idea introduced here.  These include improved error management,
some tunable knobs and performance optimizations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Paolo Bonzini
aeae883baf block: add block-job-complete
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.

Add a new block job command that manually completes background operations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Juan Quintela
3c12193d99 ram: create trace event for migration sync bitmap
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:58 +02:00
Paolo Bonzini
6e37fb811a qmp: add block-job-pause and block-job-resume
Add QMP commands matching the functionality.

Paused jobs cannot be canceled without first resuming them.  This
ensures that I/O errors are never missed by management.  However, an
optional force argument can be specified to allow that.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:14:32 +02:00
Jeff Cody
9abf2dbaf6 blockdev: rename block_stream_cb to a generic block_job_cb
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 18:23:16 +02:00
Jeff Cody
747ff60263 block: add live block commit functionality
This adds the live commit coroutine.  This iteration focuses on the
commit only below the active layer, and not the active layer itself.

The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base.  At the end, intermediate images are deleted, and the
chain stitched together.  Images are restored to their original open
flags upon completion.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 18:23:12 +02:00
Aurelien Jarno
cfb75cb980 Merge branch 'usb.65' of git://git.kraxel.org/qemu
* 'usb.65' of git://git.kraxel.org/qemu:
  uhci: Don't queue up packets after one with the SPD flag set
  usb-redir: Revert usb-redir part of commit 93bfef4c
  usb-redir: Add chardev open / close debug logging
  usb-redir: Add support for migration
  usb-redir: Store max_packet_size in endp_data
  usb-redir: Add an already_in_flight packet-id queue
  usb-redir: Change cancelled packet code into a generic packet-id queue
  ehci: Walk async schedule before and after migration
  ehci: Don't set seen to 0 when removing unseen queue-heads
  configure: usbredir fixes
  ehci: Don't process too much frames in 1 timer tick (v2)
  ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
  ehci: switch to new-style memory ops
  usb-host: allow emulated (non-async) control requests without USBPacket
2012-09-21 19:53:26 +02:00
Alon Levy
a639ab0482 hw/qxl: support client monitor configuration via device
Until now we used only the agent to change the monitor count and each
monitor resolution. This patch introduces the qemu part of using the
device as the mediator instead of the agent via virtio-serial.

Spice (>=0.11.5) calls the new QXLInterface::client_monitors_config,
which returns wether the interrupt is enabled, and if so and given a non
NULL monitors config will
generate an interrupt QXL_INTERRUPT_CLIENT_MONITORS_CONFIG with crc
checksum for the guest to verify a second call hasn't interfered.

The maximal number of monitors is limited on the QXLRom to 64.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-13 07:31:31 +02:00
Alon Levy
1a1bc08568 qxl: add trace-event for QXL_IO_LOG
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-13 07:31:30 +02:00
Alon Levy
917ae08ca1 hw/qxl: tracing fixes
Add two new trace events:
qxl_send_events(int qid, uint32_t events) "%d %d"
qxl_set_guest_bug(int qid) "%d"

Change qxl_io_unexpected_vga_mode parameters to be equivalent to those
of qxl_io_write for easier grouping under a single systemtap probe.

Change d to qxl in one place.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-13 07:31:30 +02:00
Gerd Hoffmann
3e4f910c8d ehci: switch to new-style memory ops
Also register different memory regions for capabilities,
operational registers and port status registers.  Create
separate tracepoints for operational regs and port status
regs.  Ditch a bunch of sanity checks because the memory
core will do this for us now.

Offloading the byte, word and dword access handling to the
memory core also has the side effect of fixing ehci register
access on bigendian hosts.

Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-12 08:09:49 +02:00
Gerd Hoffmann
962d11e172 xhci: add XHCIInterrupter
Move all state belonging to the (single) interrupter into a separate
struct.  First step in adding support for multiple interrupters.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:02 +02:00
Gerd Hoffmann
4c47f80063 xhci: add msix support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:02 +02:00
Gerd Hoffmann
2077469b58 usb3: bos decriptor
Add support for creating BOS descriptor and
device cappability descriptors.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:01 +02:00
Gerd Hoffmann
d829fde97d xhci: add trace_usb_xhci_ep_set_dequeue
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:01 +02:00
Gerd Hoffmann
873123fe09 xhci: trace cc codes in cleartext
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:01 +02:00
Gerd Hoffmann
d5a15814b4 xhci: drop buffering
This patch splits the xhci_xfer_data function into three.
The xhci_xfer_data function used to do does two things:

  (1) copy transfer data between guest memory and a temporary buffer.
  (2) report transfer results to the guest using events.

Now we three functions to handle this:

  (1) xhci_xfer_map creates a scatter list for the transfer and
      uses that (instead of the temporary buffer) to build a
      USBPacket.
  (2) xhci_xfer_unmap undoes the mapping.
  (3) xhci_xfer_report sends out events.

The patch also fixes reporting of transaction errors which must be
reported unconditinally, not only in case the guest asks for it
using the ISP flag.

[ v2: fix warning ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:01 +02:00
Gerd Hoffmann
1defcbd1e8 ehci: add doorbell trace events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:42:59 +02:00
Gerd Hoffmann
5c514681ab ehci: trace guest bugs
make qemu_queue_{cancel,reset} return the number of packets released,
so the caller can figure whenever there have been active packets even
though there shouldn't have been any.  Add tracepoint to log this.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:42:59 +02:00
Alon Levy
020af1c45f qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.

[ kraxel: 3 continues to be the default revision.  Once we have a new
          stable spice-server release and the qemu patches to enable
          the new bits merged we'll go flip the switch and make rev4
          the default ]

This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.

On migration reissue spice_qxl_monitors_config_async.

RHBZ: 770842

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

fixup

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05 17:11:55 +02:00
Hervé Poussineau
1ae41f447d prep: Add pc87312 Super I/O emulation
This provides floppy and IDE controllers as well as serial and parallel
ports. However, dynamic configuration of devices is not yet supported.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: QOM'ify, split out header, create CharDriverState if absent]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-08-15 22:10:58 +02:00
Alexey Kardashevskiy
0ee2c058a3 pseries: Add PCI MSI/MSI-X support
This patch implements MSI and MSI-X support for the pseries PCI host
bridge.  To do this it adds:

 * A "config_space_address to msi_table" map, since the MSI RTAS calls
take a PCI config space address as an identifier.

 * A MSIX memory region to catch msi_notify()/msix_notiry() from
virtio-pci and pass them to the guest via qemu_irq_pulse().

 * RTAS call "ibm,change-msi" which sets up MSI vectors for a
device. Note that this call may configure and return lesser number of
vectors than requested.

 * RTAS call "ibm,query-interrupt-source-number" which translates MSI
vector to interrupt controller (XICS) IRQ number.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix error case ndev < 0]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15 19:43:16 +02:00
Alexey Kardashevskiy
a2950fb6e7 pseries: Add trace event for PCI irqs
This adds a trace event in the pseries PCI specific set_irq() function to
assist in debugging.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: add trace.h include]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15 19:43:16 +02:00
Paolo Bonzini
e48e84ea80 scsi: establish precedence levels for unit attention
When a device is resized, we will report a unit attention condition
for CAPACITY DATA HAS CHANGED.  However, we should ensure that this
condition does not override a more important unit attention condition.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-27 08:25:25 +02:00
Paolo Bonzini
814589c450 scsi: add tracepoint for scsi_req_cancel
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-27 08:25:24 +02:00
Hannes Reinecke
10d6530c64 megasas: Replace trace_megasas_dcmd_dump_frame()
trace_megasas_dcmd_dump_frame() takes 9 arguments, which is
rather much. Plus the trace infrastructure doesn't support
it.  As we can get the information via other means it's pointless
to have it in the driver, so rather use some proper trace
point here and remove the old one.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-26 17:44:07 +02:00
Anthony Liguori
dfe1ce5d80 Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (41 commits)
  fdc-test: Clean up a bit
  fdc-test: introduce test_relative_seek
  fdc: fix relative seek
  qemu-iotests: Valgrind support
  coroutine-ucontext: Help valgrind understand coroutines
  qemu-io: Fix memory leaks
  hw/block-common: Factor out fall back to legacy -drive cyls=...
  blockdev: Don't limit DriveInfo serial to 20 characters
  hw/block-common: Factor out fall back to legacy -drive serial=...
  hw/block-common: Move BlockConf & friends from block.h
  Relax IDE CHS limits from 16383,16,63 to 65535,16,255
  blockdev: Drop redundant CHS validation for if=ide
  hd-geometry: Compute BIOS CHS translation in one place
  qtest: Test we don't put hard disk info into CMOS for a CD-ROM
  ide pc: Put hard disk info into CMOS only for hard disks
  block: Geometry and translation hints are now useless, purge them
  qtest: Cover qdev property for BIOS CHS translation
  ide: qdev property for BIOS CHS translation
  qdev: New property type chs-translation
  qdev: Collect private helpers in one place
  ...
2012-07-18 14:44:50 -05:00
Anthony Liguori
83199ca43c Merge remote-tracking branch 'kraxel/usb.57' into staging
* kraxel/usb.57:
  ehci: improve expire time calculation
  ehci: implement Interrupt Threshold Control support
  ehci: raise irq in the frame timer
  uhci: initialize expire_time when loading v1 vmstate
  usb: add usb attached scsi emulation
  scsi: add free_request callback
2012-07-18 14:44:27 -05:00
Markus Armbruster
1f24d7b47e hd-geometry: Switch to uint32_t to match BlockConf
Best to use the same type, to avoid unwanted truncation or sign
extension.

BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17 16:48:30 +02:00