Make the user path more like the system path. Prepare for more kinds
of runtime exceptions. Rename ILC to ILEN to make it clear that we
want to pass around a full instruction length, rather than a "code"
that happens to be stored one bit left in a larger field.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Lots of duplicated code replaced with a couple of tables. We no longer
attempt to manually invert the logic operation: the comments now match
the code. In the fully general test, constant propagate (1 << (3 - cc))
into (8 >> cc).
The new function will be usable by non-branch insns as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We were treating psw.mask as the 32-bit quantity it is in ESA mode.
In particular, the CC field was at the wrong place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Yes, we're about to rewrite all of this, but having this unconditional
jump recompute cc_op is a large source of "false diff errors" when
trying to examine before and after dumps.
Signed-off-by: Richard Henderson <rth@twiddle.net>
DISAS_EXCP is exit via exception; we wanted DISAS_JUMP.
This matters when we start cleaning up the TB exit paths.
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the same time, tidy other usages of tcg_gen_deposit_i64.
In some cases we can "type cast" rather than extend, and in
others we can allow tcg_gen_deposit_i64 itself to optimize
the HOST_LONG_BITS==32 case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The real gdb protocol doesn't split out pc or cc as real registers.
Those are pseudos that are extracted as needed from the PSW. Don't
modify env->cc_op during read -- that way lies heisenbugs.
Fill in the XXX for the fp registers.
Remove duplicated defines in cpu.h.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Also fix disassembly for COMPARE AND BRANCH. The table must be
sorted by primary opcode, and several were out of place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
pc-testdev.c cannot be compiled with MinGW (and other non POSIX hosts):
CC i386-softmmu/hw/i386/../pc-testdev.o
qemu/hw/i386/../pc-testdev.c:38:22: warning: sys/mman.h: file not found
qemu/hw/i386/../pc-testdev.c: In function ‘test_flush_page’:
qemu/hw/i386/../pc-testdev.c:103: warning: implicit declaration of function ‘mprotect’
...
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The interface to normalizeRoundAndPackFloat64 requires that the
high bit be clear. Perform one shift-right-and-jam if needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kraxel/acpi.2:
apci: assign memory regions to ich9 lpc device
apci: assign memory regions to piix4 acpi device
acpi: autoload dsdt
configure: also symlink *.aml files
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The spice_server pointer is a global variable and
vm_change_state_handler() therefore does not use its opaque parameter.
The vm change state handler is added with a pointer to the spice_server
pointer. This is useless and we probably would not want 2 levels of
pointers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Uri Lublin <uril@redhat.com>
instead use the correct headers that define these functions.
Requested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: John Spencer <maillist-qemu@barfooze.de>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This typically reduces the size from 512 bytes to 128 bytes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 9b9c37c364 always assume sparcv9,
the others are no longer supported. Remove --sparc_cpu option from the
configure list.
Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sys/mman.h is not needed (tested on Linux) and unavailable for MinGW,
so remove it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pc_fw_add_pflash_drv() ignores qemu_find_file() failure, and happily
creates a drive without a medium.
When pc_system_flash_init() asks for its size, bdrv_getlength() fails
with -ENOMEDIUM, which isn't checked either. It fails relatively
cleanly only because -ENOMEDIUM isn't a multiple of 4096:
$ qemu-system-x86_64 -S -vnc :0 -bios nonexistant
qemu: PC system firmware (pflash) must be a multiple of 0x1000
[Exit 1 ]
Fix by handling the qemu_find_file() failure.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prehistoric leftover, zap it. We poweroff via acpi these days.
And having a port (0x501,0x502) where any random guest write will make
qemu exit -- with no way to turn it off -- is a bad joke anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a test device which supports the kvmctl ioports,
so one can run the KVM unittest suite.
Intended Usage:
qemu-system-x86_64 -nographic \
-device pc-testdev \
-device isa-debug-exit,iobase=0xf4,iosize=0x04 \
-kernel /path/to/kvm/unittests/msr.flat
Where msr.flat is one of the KVM unittests, present on a
separate repo,
git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git
[ kraxel: more memory api + qom fixes ]
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When present it makes qemu exit on any write.
Mapped to port 0x501 by default.
Without this patch Anthony doesn't allow me to
remove the bochs bios debug ports because his
test suite uses this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 586502189e breaks libvirt pty
support because it tried to figure the pts name from stderr output.
Fix this by moving the label to the end of the line, this way the
libvirt parser does still recognise the message. libvirt looks
for "char device redirected to ${ptsname}<whitespace>".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The hw/dataplane/vring.c code includes linux/virtio_ring.h. Ensure that
we use linux-headers/ instead of the system-wide headers, which may be
out-of-date on older distros.
This resolves the following build error on Debian 6:
CC hw/dataplane/vring.o
cc1: warnings being treated as errors
hw/dataplane/vring.c: In function 'vring_enable_notification':
hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event'
hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event'
hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment
Note that we now build dataplane/ for each target instead of only once.
There is no way around this since linux-headers/ is only available for
per-target objects - and it's how virtio, vfio, kvm, and friends are
built.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Incremental builds added new lines to that file each time when configure
was run.
Now a new file with a comment line is written.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
TCI no longer compiled after commit 76cad71136.
The TCI disassembler depends on data structures which are different for
each QEMU target, so it cannot be compiled as a universal-obj today.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
savevm.c suffers from the same problem as some other files.
Some years ago savevm.c was created from vl.c, moving some
code from there into a separate file. At that time, all
includes were just copied from vl.c to savevm.c, without
checking which ones are needed and which are not.
But actually most of that stuff is _not_ needed. More, some
stuff is wrong, for example, *BSD #ifdef'ery around <util.h>
vs <libutil.h> - for one, it fails to build on Debian/kFreebsd.
Just remove all this. Maybe there's a possibility to clean
it up further - like removing <windows.h> (and maybe including
winsock.h for htons etc), and maybe it's possible to remove
some internal #includes too, but I didn't check this.
While at it, remove duplicate #include of qemu/timer.h.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Curses display requires stdin/out to stay on the terminal,
so -daemonize makes no sense in this case. Instead of
leaving display uninitialized like is done since 995ee2bf46,
explicitly detect this case earlier and error out.
-nographic can actually be used with -daemonize, by redirecting
everything to a null device, but the problem is that according
to documentation and historical behavour, -nographic redirects
guest ports to stdin/out, which, again, makes no sense in case
of -daemonize. Since -nographic is a legacy option, don't bother
fixing this case (to allow -nographic and -daemonize by redirecting
guest ports to null instead of stdin/out in this case), but disallow
it completely instead, to stop garbling host terminal.
If no display display needed and user wants to use -nographic,
the right way to go is to use
-serial null -parallel null -monitor none -display none -vga none
instead of -nographic.
Also prevent the same issue -- it was possible to get garbled
host tty after
-nographic -daemonize
and it is still possible to have it by using
-serial stdio -daemonize
Fix this by disallowing opening stdio chardev when -daemonize
is specified.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 7f6f0ae5b9 added two assertions.
One of these assertions is not needed:
The pointer ts is never NULL because it is initialized with the
address of an array element.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For the error case such as SD_RES_NO_SPACE, we shouldn't update the inode bitmap
to avoid the scenario that the object is allocated but wasn't created at the
server side. This will result in VM's IO error on the failed object.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit fbcad04d6b added fprintf statements
with wrong format specifiers.
GetLastError() returns a DWORD which is unsigned long, so %lu must be used.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img will complain when qcow or qcow2
size overflow for 64 bits, report the right
message in this condition.
$./qemu-img create -f qcow2 /tmp/foo 0x10000000000000000
before change:
qemu-img: Invalid image size specified! You may use k, M, G or T suffixes for
qemu-img: kilobytes, megabytes, gigabytes and terabytes.
after change:
qemu-img: Image size must be less than 8 EiB!
[Resolved conflict with a9300911 goto removal -- Stefan]
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
if value to be translated is larger than INT64_MAX,
this function will not be convenient for caller to
be aware of it, so change a little for this.
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
