The file migration code was allowing a possible -1 from a failed call
to dup() to propagate into the new QIOFileChannel::fd before checking
for validity. Coverity doesn't like that, possibly due to the the
lseek(-1, ...) call that would ensue before returning from the channel
creation routine.
Use the newly introduced qio_channel_file_dupfd() to properly check
the return of dup() before proceeding.
Fixes: CID 1539961
Fixes: CID 1539965
Fixes: CID 1539960
Fixes: 2dd7ee7a51 ("migration/multifd: Add incoming QIOChannelFile support")
Fixes: decdc76772 ("migration/multifd: Add mapped-ram support to fd: URI")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240311233335.17299-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a new helper function for creating a QIOChannelFile channel with a
duplicated file descriptor. This saves the calling code from having to
do error checking on the dup() call.
Suggested-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240311233335.17299-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmXwPUAACgkQ7wSWWzmN
YhFnIwgAgctDniJwlRxXB01eVlzXz7IulHnpSby07XEJxENSpGB8ufaeE4eK5gJy
NVK6C2+1EU2vRxm4oIdcvtN4C4/jtRbYYjiSTx7eE4FmSkqshSnR5XCV72LDqG3i
WbzInjMvYfysmcMXLfrWgxOnVew9WqEzlpEWlc7FfNKnkzBVf+JDztfqCUx0XM7H
qefw4ImjqQw993QxJpipXC7aEGUyouB0RIBB71FkCa9ihlh9x7W68evbOI/jTn5q
HWuStgS02sKHjRFliMbdbMY77FNUz4Yroo/GKSvGt64atxkQSJqPNAV+/9n18LNy
QAH5eK6cXFPOIAaYpADU5kHDVVAFiw==
=iBdx
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmXwPUAACgkQ7wSWWzmN
# YhFnIwgAgctDniJwlRxXB01eVlzXz7IulHnpSby07XEJxENSpGB8ufaeE4eK5gJy
# NVK6C2+1EU2vRxm4oIdcvtN4C4/jtRbYYjiSTx7eE4FmSkqshSnR5XCV72LDqG3i
# WbzInjMvYfysmcMXLfrWgxOnVew9WqEzlpEWlc7FfNKnkzBVf+JDztfqCUx0XM7H
# qefw4ImjqQw993QxJpipXC7aEGUyouB0RIBB71FkCa9ihlh9x7W68evbOI/jTn5q
# HWuStgS02sKHjRFliMbdbMY77FNUz4Yroo/GKSvGt64atxkQSJqPNAV+/9n18LNy
# QAH5eK6cXFPOIAaYpADU5kHDVVAFiw==
# =iBdx
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:32:16 GMT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
ebpf: Updated eBPF program and skeleton.
qmp: Added new command to retrieve eBPF blob.
virtio-net: Added property to load eBPF RSS with fds.
ebpf: Added eBPF initialization by fds.
ebpf: Added eBPF map update through mmap.
Avoid unaligned fetch in ladr_match()
e1000e: fix link state on resume
igb: fix link state on resume
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Rename hw/ide/ahci-internal.h for consistency (Zoltan)
- More convenient PCI hotplug trace events (Vladimir)
- Short CLI option to add drives for sam460ex machine (Zoltan)
- More missing ERRP_GUARD() macros (Zhao)
- Avoid faulting when unmapped I/O BAR is accessed on SPARC EBUS (Mark)
- Remove unused includes in hw/core/ (Zhao)
- New PCF8574 GPIO over I2C model (Dmitriy)
- Require ObjC on Darwin macOS by default (Peter)
- Corrected "-smp parameter=1" placement in docs/ (Zhao)
-----BEGIN PGP SIGNATURE-----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=JQg1
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240312' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Rename hw/ide/ahci-internal.h for consistency (Zoltan)
- More convenient PCI hotplug trace events (Vladimir)
- Short CLI option to add drives for sam460ex machine (Zoltan)
- More missing ERRP_GUARD() macros (Zhao)
- Avoid faulting when unmapped I/O BAR is accessed on SPARC EBUS (Mark)
- Remove unused includes in hw/core/ (Zhao)
- New PCF8574 GPIO over I2C model (Dmitriy)
- Require ObjC on Darwin macOS by default (Peter)
- Corrected "-smp parameter=1" placement in docs/ (Zhao)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXwEJkACgkQ4+MsLN6t
# wN4A3hAAngVu7VmyrfqYF6jfDMUuRGYaKf4D73/KF6R1PsU+nJdN7UAkECLj8o7g
# mkcAQu1U3fKCUssF6MJ2a3kU+rD1OkkA/ZcitzgWwEjCK8KVjtMt2HzEqX+B/X+e
# RUVjXMOMkyV48MF0+yLhJz+lQiDpEBFVxIgssPBNUz1Pw9IfoXp29Bfz+bYBThS4
# ywAdvCefNzSira0Nt6RWTnvgBHB/1+aLy1uMSt0Xu926zcqoxQJ0b//0flYL8vAf
# JuSSZuiXPw+oAc3qG3d6aPl3g8DrFn3pvPD471KlFQAnB0dlhEZZqNBPvraySpHl
# h04Y8teHYj9XfxPtaWfaEdgQCazdkKFR/q7E5c9GU00Rf469BJeuo9Pzkm4kWfbU
# sbCl8em5biVZ5DpBIOMT3/D0JOyGf7/CM8y5c3Jc92hapx2NdSszkvCicrDE1+i0
# zEr4N0P/F2x5KFVFkQ3Xzv2Jtzw+iXj6kSE5a5/64GMK29Mqu/EPaSkvwGDQOs3N
# QJ9mpa4gg47g310a0/nH0i5eVbvGVuzcCMP6VXOBVr18cJ7JFQFFiYcvoTDXNQ2m
# sq5xUelRimnWfKpawomJXkS+/j0usH61/aQBuDKfj45i8/XFRejCIk0gMWQ9hjyD
# no1HqDN8CVXtiPNSinC7ctNHU5ClS0xO/BRl0h3PGC7Bl+A2eVY=
# =JQg1
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 08:21:45 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20240312' of https://github.com/philmd/qemu:
docs/about/deprecated.rst: Move SMP configurations item to system emulator section
meson.build: Always require an objc compiler on macos hosts
hw/gpio: introduce pcf8574 driver
hw/core: Cleanup unused included headers in numa.c
hw/core: Cleanup unused included header in machine-qmp-cmds.c
hw/core: Cleanup unused included headers in cpu-common.c
sun4u: remap ebus BAR0 to use unassigned_io_ops instead of alias to PCI IO space
hw/misc/ivshmem: Fix missing ERRP_GUARD() for error_prepend()
hw/core/qdev-properties-system: Fix missing ERRP_GUARD() for error_prepend()
hw/core/loader-fit: Fix missing ERRP_GUARD() for error_prepend()
hw/ppc/sam460ex: Support short options for adding drives
hw/pci: add some convenient trace-events for pcie and shpc hotplug
hw/ide/ahci: Rename ahci_internal.h to ahci-internal.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Avihai's fix to allow vmstate iterators to not starve for VFIO
- Maksim's fix on additional check on precopy load error
- Fabiano's fix on fdatasync() hang in mapped-ram
- Jonathan's fix on vring cached access over MMIO regions
- Cedric's cleanup patches 1-4 out of his error report series
- Yu's fix for RDMA migration (which used to be broken even for 8.2)
- Anthony's small cleanup/fix on err message
- Steve's patches on privatize migration.h
- Xiang's patchset to enable zero page detections in multifd threads
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZe9+uBIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wamaQD/SvmpMEcuRndT9LPSxzXowAGDZTBpYUfv
5XAbx80dS9IBAO8PJJgQJIBHBeacyLBjHP9CsdVtgw5/VW+wCsbfV4AB
=xavb
-----END PGP SIGNATURE-----
Merge tag 'migration-20240311-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request
- Avihai's fix to allow vmstate iterators to not starve for VFIO
- Maksim's fix on additional check on precopy load error
- Fabiano's fix on fdatasync() hang in mapped-ram
- Jonathan's fix on vring cached access over MMIO regions
- Cedric's cleanup patches 1-4 out of his error report series
- Yu's fix for RDMA migration (which used to be broken even for 8.2)
- Anthony's small cleanup/fix on err message
- Steve's patches on privatize migration.h
- Xiang's patchset to enable zero page detections in multifd threads
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZe9+uBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wamaQD/SvmpMEcuRndT9LPSxzXowAGDZTBpYUfv
# 5XAbx80dS9IBAO8PJJgQJIBHBeacyLBjHP9CsdVtgw5/VW+wCsbfV4AB
# =xavb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Mar 2024 21:59:20 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240311-pull-request' of https://gitlab.com/peterx/qemu: (34 commits)
migration/multifd: Add new migration test cases for legacy zero page checking.
migration/multifd: Enable multifd zero page checking by default.
migration/multifd: Implement ram_save_target_page_multifd to handle multifd version of MigrationOps::ram_save_target_page.
migration/multifd: Implement zero page transmission on the multifd thread.
migration/multifd: Add new migration option zero-page-detection.
migration/multifd: Allow clearing of the file_bmap from multifd
migration/multifd: Allow zero pages in file migration
migration: purge MigrationState from public interface
migration: delete unused accessors
migration: privatize colo interfaces
migration: migration_file_set_error
migration: migration_is_device
migration: migration_thread_is_self
migration: export vcpu_dirty_limit_period
migration: export migration_is_running
migration: export migration_is_active
migration: export migration_is_setup_or_active
migration: remove migration.h references
migration: export fewer options
migration: Fix format in error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Updated section name, so libbpf should init/gues proper
program type without specifications during open/load.
Also, added map_flags with explicitly declared BPF_F_MMAPABLE.
Added check for BPF_F_MMAPABLE flag to meson script and
requirements to libbpf version.
Also changed fragmentation flag check - some TCP/UDP packets
may be considered fragmented if DF flag is set.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now, the binary objects may be retrieved by id.
It would require for future qmp commands that may require specific
eBPF blob.
Added command "request-ebpf". This command returns
eBPF program encoded base64. The program taken from the
skeleton and essentially is an ELF object that can be
loaded in the future with libbpf.
The reason to use the command to provide the eBPF object
instead of a separate artifact was to avoid issues related
to finding the eBPF itself. eBPF object is an ELF binary
that contains the eBPF program and eBPF map description(BTF).
Overall, eBPF object should contain the program and enough
metadata to create/load eBPF with libbpf. As the eBPF
maps/program should correspond to QEMU, the eBPF can't
be used from different QEMU build.
The first solution was a helper that comes with QEMU
and loads appropriate eBPF objects. And the issue is
to find a proper helper if the system has several
different QEMUs installed and/or built from the source,
which helpers may not be compatible.
Another issue is QEMU updating while there is a running
QEMU instance. With an updated helper, it may not be
possible to hotplug virtio-net device to the already
running QEMU. Overall, requesting the eBPF object from
QEMU itself solves possible failures with acceptable effort.
Links:
[PATCH 3/5] qmp: Added the helper stamp check.
https://lore.kernel.org/all/20230219162100.174318-4-andrew@daynix.com/
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
eBPF RSS program and maps may now be passed during initialization.
Initially was implemented for libvirt to launch qemu without permissions,
and initialized eBPF program through the helper.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It allows using file descriptors of eBPF provided
outside of QEMU.
QEMU may be run without capabilities for eBPF and run
RSS program provided by management tool(g.e. libvirt).
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Changed eBPF map updates through mmaped array.
Mmaped arrays provide direct access to map data.
It should omit using bpf_map_update_elem() call,
which may require capabilities that are not present.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There is no guarantee that the PCNetState is allocated such that
csr[8] is allocated on an 8-byte boundary. Since not all hosts are
capable of unaligned fetches the 16-bit elements need to be fetched
individually to avoid a potential fault. Closes issue #2143
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2143
Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
On resume e1000e_vm_state_change() always calls e1000e_autoneg_resume()
that sets link_down to false, and thus activates the link even
if we have disabled it.
The problem can be reproduced starting qemu in paused state (-S) and
then set the link to down. When we resume the machine the link appears
to be up.
Reproducer:
# qemu-system-x86_64 ... -device e1000e,netdev=netdev0,id=net0 -S
{"execute": "qmp_capabilities" }
{"execute": "set_link", "arguments": {"name": "net0", "up": false}}
{"execute": "cont" }
To fix the problem, merge the content of e1000e_vm_state_change()
into e1000e_core_post_load() as e1000 does.
Buglink: https://issues.redhat.com/browse/RHEL-21867
Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation")
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
On resume igb_vm_state_change() always calls igb_autoneg_resume()
that sets link_down to false, and thus activates the link even
if we have disabled it.
The problem can be reproduced starting qemu in paused state (-S) and
then set the link to down. When we resume the machine the link appears
to be up.
Reproducer:
# qemu-system-x86_64 ... -device igb,netdev=netdev0,id=net0 -S
{"execute": "qmp_capabilities" }
{"execute": "set_link", "arguments": {"name": "net0", "up": false}}
{"execute": "cont" }
To fix the problem, merge the content of igb_vm_state_change()
into igb_core_post_load() as e1000 does.
Buglink: https://issues.redhat.com/browse/RHEL-21867
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Cc: akihiko.odaki@daynix.com
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In the commit 54c4ea8f3a ("hw/core/machine-smp: Deprecate unsupported
'parameter=1' SMP configurations"), the SMP related item is put under
the section "User-mode emulator command line arguments" instead of
"System emulator command line arguments".
-smp is a system emulator command, so move SMP configurations item to
system emulator section.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240312071512.3283513-1-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We currently only insist that an ObjectiveC compiler is present on
macos hosts if we're building the Cocoa UI. However, since then
we've added some other parts of QEMU which are also written in ObjC:
the coreaudio audio backend, and the vmnet net backend. This means
that if you try to configure QEMU on macos with --disable-cocoa the
build will fail:
../meson.build:3741:13: ERROR: No host machine compiler for 'audio/coreaudio.m'
Since in practice any macos host will have an ObjC compiler
available, rather than trying to gate the compiler detection on an
increasingly complicated list of every bit of QEMU that uses ObjC,
just require it unconditionally on macos hosts.
Resolves https://gitlab.com/qemu-project/qemu/-/issues/2138
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240311133334.3991537-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
NXP PCF8574 and compatible ICs are simple I2C GPIO expanders.
PCF8574 incorporates quasi-bidirectional IO, and simple
communication protocol, when IO read is I2C byte read, and
IO write is I2C byte write. User can think of it as
open-drain port, when line high state is input and line low
state is output.
Signed-off-by: Dmitrii Sharikhin <d.sharikhin@yadro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <f1552d822276e878d84c01eba2cf2c7c9ebdde00.camel@yadro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove unused header in numa.c:
* qemu/bitmap.h
* migration/vmstate.h
Note: Though parse_numa_hmat_lb() has the variable named "bitmap_copy",
it doesn't use the normal bitmap ops so that it's safe to exclude
qemu/bitmap.h header.
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240311075621.3224684-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove unused header (qemu/main-loop.h) in machine-qmp-cmds.c.
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240311075621.3224684-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove unused headers in cpu-common.c:
* qemu/notify.h
* exec/cpu-common.h
* qemu/error-report.h
* qemu/qemu-print.h
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240311075621.3224684-2-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
During kernel startup OpenBSD accesses addresses mapped by BAR0 of the ebus device
but at offsets where no IO devices exist. Before commit 4aa07e8649 ("hw/sparc64/ebus:
Access memory regions via pci_address_space_io()") BAR0 was mapped to legacy IO
space which allows accesses to unmapped devices to succeed, but afterwards these
accesses to unmapped PCI IO space cause a memory fault which prevents OpenBSD from
booting.
Since no devices are mapped at the addresses accessed by OpenBSD, change ebus BAR0
from a PCI IO space alias to an IO memory region using unassigned_io_ops which allows
these accesses to succeed and so allows OpenBSD to boot once again.
Fixes: 4aa07e8649 ("hw/sparc64/ebus: Access memory regions via pci_address_space_io()")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240311064345.2531197-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The ivshmem_common_realize() passes @errp to error_prepend(), and as a
DeviceClass.realize method, there are too many possible callers to check
the impact of this defect; it may or may not be harmless. Thus it is
necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Juan Quintela <quintela@trasno.org>
Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Cc: Michael Galaxy <mgalaxy@akamai.com>
Cc: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-17-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The set_chr() passes @errp to error_prepend() without ERRP_GUARD().
As a PropertyInfo.set method, there are too many possible callers to
check the impact of this defect; it may or may not be harmless. Thus it
is necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240311033822.3142585-16-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In hw/core/loader-fit.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- fit_load_kernel()
- fit_load_fdt()
Their @errp parameters are both the pointers of the local @err virable
in load_fit().
Though they don't cause the issue like [1] said, to follow the
requirement of @errp, add missing ERRP_GUARD() at their beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Paul Burton <paulburton@kernel.org>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-15-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Having to use -drive if=none,... and -device ide-[cd,hd] is
inconvenient. Add support for shorter convenience options such as
-cdrom and -drive media=disk. Also adjust two nearby comments for code
style.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20240305225721.E9A404E6005@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add trace-events that may help to debug problems with hotplugging.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240301154146.761531-2-vsementsov@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Other headers now use dash instead of underscore. Rename
ahci_internal.h accordingly for consistency.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240227131310.C24EB4E6005@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that zero page checking is done on the multifd sender threads by
default, we still provide an option for backward compatibility. This
change adds a qtest migration test case to set the zero-page-detection
option to "legacy" and run multifd migration with zero page checking on the
migration main thread.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-8-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
1. Set default "zero-page-detection" option to "multifd". Now
zero page checking can be done in the multifd threads and this
becomes the default configuration.
2. Handle migration QEMU9.0 -> QEMU8.2 compatibility. We provide
backward compatibility where zero page checking is done from the
migration main thread.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-7-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
1. Add a dedicated handler for MigrationOps::ram_save_target_page in
multifd live migration.
2. Refactor ram_save_target_page_legacy so that the legacy and multifd
handlers don't have internal functions calling into each other.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20240226195654.934709-4-hao.xiang@bytedance.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-6-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
1. Add zero_pages field in MultiFDPacket_t.
2. Implements the zero page detection and handling on the multifd
threads for non-compression, zlib and zstd compression backends.
3. Added a new value 'multifd' in ZeroPageDetection enumeration.
4. Adds zero page counters and updates multifd send/receive tracing
format to track the newly added counters.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240311180015.3359271-5-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
This new parameter controls where the zero page checking is running.
1. If this parameter is set to 'legacy', zero page checking is
done in the migration main thread.
2. If this parameter is set to 'none', zero page checking is disabled.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-4-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently only need to clear the mapped-ram file bitmap from the
migration thread during save_zero_page.
We're about to add support for zero page detection on the multifd
thread, so allow ramblock_set_file_bmap_atomic() to also clear the
bits.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240311180015.3359271-3-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently, it's an error to have no data pages in the multifd file
migration because zero page detection is done in the migration thread
and zero pages don't reach multifd. This is enforced with the
pages->num assert.
We're about to add zero page detection on the multifd thread. Fix the
file_write_ramblock_iov() to stop considering p->iovs_num=0 an error.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240311180015.3359271-2-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
Delete the MigrationState parameter from migration_is_setup_or_active
and move it to the public API in misc.h.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/1710179338-294359-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
A small number of migration options are accessed by migration clients,
but to see them clients must include all of options.h, which is mostly
for migration core code. migrate_mode() in particular will be needed by
multiple clients.
Refactor the option declarations so clients can see the necessary few via
misc.h, which already exports a portion of the client API.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1710179319-294320-1-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Xt/n
-----END PGP SIGNATURE-----
Merge tag 'qga-pull-2024-03-11-2' of https://github.com/kostyanf14/qemu into staging
qga-pull-2024-03-11-2
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmXvMF4ACgkQ711egWG6
# hOd7GQ/9H11bXH5U2HZHAyEv68rCuGxHt57yjy9GfrSGAE7kqkLJ0bHwxdgoj09A
# mmaTOakOEhM5tyrkFYsROde3ta0fAwdFQXyhqpWDHG0ZwDDCAlsNsEuDd541KXbg
# qFTue26BM4EJEwTYy94nEEhOHD+2GgEAuPIsUCF6QDhrq+sBqUts1pH3uUM+E3Sg
# 7HSXaF9O/RbgYR6J8FVA53tvNOP4WgOYZ/SZoFwKYzIOAblcaRgJvVbm600OqQDb
# DUZ96s6HUBVBazKx4t24WwPOkgcvYgp7b8QYj2VVfjRU2IHnFumv9A47KuEdJEUl
# meZlo8TsgfL+uSiYWiRvps1Eo1uoS2M4s4FYGbuOeABYviLr3XhJM7VarNyPp7nf
# lupuyeqydXCic5LFbjSg5gkpaIhFYQ9gANYr6JZjPPjX5G8hmgCeB6YsZT98Ygmi
# yG1np2luapvFGsDCPd8kgNpfTkKhOpKghUnTC3UESReV8mjBGhJHRQTd+lMV7YWJ
# reMRxlqrqNq69lDUnlNuSXOqPJX1qHHGkWuV9pdz641tFvw7vigE07qhvsCr8Y7b
# tAg6oDcw+1uuq2t3nHmfkzic6WTxb4lFmSpShsDu2sRA7MqWE3lCefNoS75R+xaI
# FebdrkjkFxdbazyl6oKXwxkOkAR7rFoTvVKKbG79DVMIBDiu4BE=
# =Xt/n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Mar 2024 16:25:02 GMT
# gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-pull-2024-03-11-2' of https://github.com/kostyanf14/qemu:
qga-win: Add support of Windows Server 2025 in get-osinfo command
qga/commands-win32: Do not set matrix_lookup_t/win_10_0_t arrays size
qga/commands-win32: Declare const qualifier before type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In file_write_ramblock_iov(), "offset" is "uintptr_t" and not
"ram_addr_t". While usually they are both equivalent, this is not the
case with CONFIG_XEN_BACKEND.
Use the right format. This will fix build on 32-bit.
Fixes: f427d90b98 ("migration/multifd: Support outgoing mapped-ram stream format")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Link: https://lore.kernel.org/r/20240311123439.16844-1-anthony.perard@citrix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
