If the access is bigger than the MemoryRegion supports,
flatview_read/write_continue() will attempt to update the Memory Region.
but the address passed to flatview_translate() is relative to the cache, not
to the FlatView.
On arm/virt with interleaved CXL memory emulation and virtio-blk-pci this
lead to the first part of descriptor being read from the CXL memory and the
second part from PA 0x8 which happens to be a blank region
of a flash chip and all ffs on this particular configuration.
Note this test requires the out of tree ARM support for CXL, but
the problem is more general.
Avoid this by adding new address_space_read_continue_cached()
and address_space_write_continue_cached() which share all the logic
with the flatview versions except for the MemoryRegion lookup which
is unnecessary as the MemoryRegionCache only covers one MemoryRegion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240307153710.30907-5-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This code will be reused for the address_space_cached accessors
shortly.
Also reduce scope of result variable now we aren't directly
calling this in the loop.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240307153710.30907-4-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Precursor to factoring out the inner loops for reuse.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240307153710.30907-3-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The calls to flatview_read/write[_continue]() have parameters addr and
addr1 but the names give no indication of what they are addresses of.
Rename addr1 to mr_addr to reflect that it is the translated address
offset within the MemoryRegion returned by flatview_translate().
Similarly rename the parameter in address_space_read/write_cached_slow()
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240307153710.30907-2-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
In commit 3fa9642ff7 change was made to convert the RDMA backend to
accept MigrateAddress struct. However, the assignment of "host" leads
to data corruption on the target host and the failure of migration.
isock->host = rdma->host;
By allocating the memory explicitly for it with g_strdup_printf(), the
issue is fixed and the migration doesn't fail any more.
Fixes: 3fa9642ff7 ("migration: convert rdma backend to accept MigrateAddress")
Cc: qemu-stable <qemu-stable@nongnu.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/CAHEcVy4L_D6tuhJ8h=xLR4WaPaprJE3nnxZAEyUnoTrxQ6CF5w@mail.gmail.com
Signed-off-by: Yu Zhang <yu.zhang@ionos.com>
[peterx: use g_strdup() instead of g_strdup_printf(), per Zhijian]
Signed-off-by: Peter Xu <peterx@redhat.com>
Commit bc38feddeb ("io: fsync before closing a file channel") added a
fsync/fdatasync at the closing point of the QIOChannelFile to ensure
integrity of the migration stream in case of QEMU crash.
The decision to do the sync at qio_channel_close() was not the best
since that function runs in the main thread and the fsync can cause
QEMU to hang for several minutes, depending on the migration size and
disk speed.
To fix the hang, remove the fsync from qio_channel_file_close().
At this moment, the migration code is the only user of the fsync and
we're taking the tradeoff of not having a sync at all, leaving the
responsibility to the upper layers.
Fixes: bc38feddeb ("io: fsync before closing a file channel")
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240305195629.9922-1-farosas@suse.de
Link: https://lore.kernel.org/r/20240305174332.2553-1-farosas@suse.de
[peterx: add more comment to the qio_channel_close()]
Signed-off-by: Peter Xu <peterx@redhat.com>
When commit bd2270608f ("migration/ram.c: add a notifier chain for
precopy") added PRECOPY_NOTIFY_SETUP notifiers at the end of
qemu_savevm_state_setup(), it didn't take into account a possible
error in the loop calling vmstate_save() or .save_setup() handlers.
Check ret value before calling the notifiers.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240304122844.1888308-10-clg@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The SaveVMHandlers structure is still in use for complex subsystems
and devices. Document the handlers since we are going to modify a few
later.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240304122844.1888308-9-clg@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
They are only used once.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240304122844.1888308-8-clg@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This will help detect issues regarding I/O channels usage.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240304122844.1888308-7-clg@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
If a migration stream is broken, the address and flag reading can return
zero. Thus, an irrelevant flag error will be returned instead of EIO.
It can be fixed by additional check after the reading.
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Link: https://lore.kernel.org/r/20240304144203.158477-1-davydov-max@yandex-team.ru
Signed-off-by: Peter Xu <peterx@redhat.com>
VFIO migration buffer size is currently limited to 1MB. Therefore, there
is no need to check if migration rate exceeded, as in the worst case it
will exceed by only 1MB.
However, if the buffer size is later changed to a bigger value,
vfio_save_iterate() should enforce migration rate (similar to migration
RAM code).
Add a note about this in vfio_save_iterate() to serve as a reminder.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240304105339.20713-4-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently, vfio_save_state() returns 1 regardless of whether there is
more data to send or not. This was done to prevent a fast changing VFIO
device from potentially blocking other devices from sending their data,
as qemu_savevm_state_iterate() serialized devices.
Now that qemu_savevm_state_iterate() no longer serializes devices, there
is no need for that.
Refactor vfio_save_state() to return 0 if more data is available and 1
if no more data is available.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240304105339.20713-3-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Commit 90697be889 ("live migration: Serialize vmstate saving in stage
2") introduced device serialization in qemu_savevm_state_iterate(). The
rationale behind it was to first complete migration of slower changing
block devices and only then migrate the RAM, to avoid sending fast
changing RAM pages over and over.
This commit was added a long time ago, and while it was useful back
then, it is not the case anymore:
1. Block migration is deprecated, see commit 66db46ca83 ("migration:
Deprecate block migration").
2. Today there are other iterative devices besides RAM and block, such
as VFIO, which are registered for migration after RAM. With current
serialization behavior, a fast changing device can block other
devices from sending their data, which may prevent migration from
converging in some cases.
The issue described in item 2 was observed in several VFIO migration
scenarios with switchover-ack capability enabled, where some workload on
the VM prevented RAM from ever reaching a hard zero, thus blocking VFIO
initial pre-copy data from being sent. Hence, destination could not ack
switchover and migration could not converge.
Fix that by not serializing iterative devices in
qemu_savevm_state_iterate().
Note that this still doesn't fully prevent device starvation. As
correctly pointed out by Peter [1], a fast changing device might
constantly consume all allocated bandwidth and block the following
devices. However, this scenario is more likely to happen only if
max-bandwidth is low.
[1] https://lore.kernel.org/qemu-devel/Zd6iw9dBhW6wKNxx@x1n/
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240304105339.20713-2-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
We are already in the third month of 2024 but the copyright notices still refer
to 2023. Update the date to 2024 in documentation and help texts.
Cc: peter.maydell@linaro.org
Cc: qemu-trivial@nongnu.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240311120346.9596-1-anisinha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Callers of elf64_getphdr() and elf_getphdrnum() assume phdrs are
accessible.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2202
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240307-elf2dmp-v4-19-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes crashes with truncated dumps.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20240307-elf2dmp-v4-18-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This removes the need to enumarate QEMUCPUState twice and saves code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20240307-elf2dmp-v4-17-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
rol64() is roubust against too large shift values and fixes UBSan
warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240307-elf2dmp-v4-14-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The relevant value may be unaligned and is little-endian.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240307-elf2dmp-v4-13-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes elf2dmp more robust against corrupted inputs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20240307-elf2dmp-v4-12-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Destroy PA space even if paging base couldn't be found, fixing memory
leak.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20240307-elf2dmp-v4-11-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not checking PA resolution failure can result in NULL deference.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20240307-elf2dmp-v4-10-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pa_space_create() used to return an integer to propagate error, but
it never fails so let it return void.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240307-elf2dmp-v4-4-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let fill_context() continue even if it fails to fill contexts of some
CPUs. A dump may still contain valuable information even if it lacks
contexts of some CPUs due to dump corruption or a failure before
starting CPUs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20240307-elf2dmp-v4-3-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A common construct in contrib/elf2dmp is to set "err" flag and goto
in error paths. In such a construct, there is only one successful path
while there are several error paths, so it will be more simpler to
initialize "err" flag set, and clear it in the successful path.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20240307-elf2dmp-v4-2-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
They are always evaluated to 1.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20240307-elf2dmp-v4-1-4f324ad4d99d@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU includes some models of old Arm machine types which are
a bit problematic for us because:
* they're written in a very old way that uses numerous APIs that we
would like to get away from (eg they don't use qdev, they use
qemu_system_reset_request(), they use vmstate_register(), etc)
* they've been that way for a decade plus and nobody particularly has
stepped up to try to modernise the code (beyond some occasional
work here and there)
* we often don't have test cases for them, which means that if we
do try to do the necessary refactoring work on them we have no
idea if they even still work at all afterwards
All these machine types are also of hardware that has largely passed
away into history and where I would not be surprised to find that
e.g. the Linux kernel support was never tested on real hardware
any more.
After some consultation with the Linux kernel developers, we
are going to deprecate:
All PXA2xx machines:
akita Sharp SL-C1000 (Akita) PDA (PXA270)
borzoi Sharp SL-C3100 (Borzoi) PDA (PXA270)
connex Gumstix Connex (PXA255)
mainstone Mainstone II (PXA27x)
spitz Sharp SL-C3000 (Spitz) PDA (PXA270)
terrier Sharp SL-C3200 (Terrier) PDA (PXA270)
tosa Sharp SL-6000 (Tosa) PDA (PXA255)
verdex Gumstix Verdex Pro XL6P COMs (PXA270)
z2 Zipit Z2 (PXA27x)
All OMAP2 machines:
n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
One of the OMAP1 machines:
cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
Rationale:
* for QEMU dropping individual machines is much less beneficial
than if we can drop support for an entire SoC
* the OMAP2 QEMU code in particular is large, old and unmaintained,
and none of the OMAP2 kernel maintainers said they were using
QEMU in any of their testing/development
* although there is a setup that is booting test kernels on some
of the PXA2xx machines, nobody seemed to be using them as part
of their active kernel development and my impression from the
email thread is that PXA is the closest of all these SoC families
to being dropped from the kernel soon
* nobody said they were using cheetah, so it's entirely
untested and quite probably broken
* on the other hand the OMAP1 sx1 model does seem to be being
used as part of kernel development, and there was interest
in keeping collie around
In particular, the mainstone, tosa and z2 machine types have
already been dropped from Linux.
Mark all these machine types as deprecated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240308171621.3749894-1-peter.maydell@linaro.org
Add support of Windows Server 2025 in get-osinfo command
Signed-off-by: Dehan Meng <demeng@redhat.com>
Message-ID: <20240222152835.72095-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-4-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
ga_get_win_name() iterates over all elements in the arrays by
checking the 'version' field is non-NULL. Since the arrays are
guarded by a NULL terminating element, we don't need to specify
their size:
static char *ga_get_win_name(...)
{
...
const ga_matrix_lookup_t *table = WIN_VERSION_MATRIX[tbl_idx];
const ga_win_10_0_t *win_10_0_table = ...
...
while (table->version != NULL) {
^^^^^^^^^^^^^^^
while (win_10_0_table->version != NULL) {
^^^^^^^^^^^^^^^
This will simplify maintenance when adding new entries to these
arrays.
Split WIN_VERSION_MATRIX into WIN_CLIENT_VERSION_MATRIX and
WIN_SERVER_VERSION_MATRIX because multidimensional array must
have bounds for all dimensions except the first.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240222152835.72095-3-philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-3-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Most of the code base use the 'const' qualifier *before*
the type being qualified. Use the same style to unify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240222152835.72095-2-philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-2-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
BI_CPUTYPE/BI_MMUTYPE/BI_FPUTYPE were statically assigned to the
68040 information.
This patch changes the code to set in bootinfo the information
provided by the command line '-cpu' parameter.
Bug: https://gitlab.com/qemu-project/qemu/-/issues/2091
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240223155742.2790252-1-laurent@vivier.eu>
Add reset support for mcf5208.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240309093459.984565-1-angelo@kernel-space.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The support for "parameter=0" SMP configurations is removed, and QEMU
returns error for those cases.
So add the related test cases to ensure parameters can't accept 0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-14-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The smp_props.has_clusters in MachineClass is not a user configured
field, and it indicates if user specifies "clusters" in -smp.
After -smp parsing, other module could aware if the cluster level
is configured by user. This is used when the machine has only 1 cluster
since there's only 1 cluster by default.
Add the check to cover this field.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-13-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, -smp supports up to 7-levels topology hierarchy:
-drawers/books/sockets/dies/clusters/cores/threads.
Though no machine supports all these 7 levels yet, these 7 levels have
the strict containment relationship and together form the generic CPU
topology representation of QEMU.
Also, note that the maxcpus is calculated by multiplying all 7 levels:
maxcpus = drawers * books * sockets * dies * clusters *
cores * threads.
To cover this code path, it is necessary to test the full topology case
(with all 7 levels). This also helps to avoid introducing new issues by
further expanding the CPU topology in the future.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-12-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since s390 machine supports both "drawers" and "books" in -smp, add the
"drawers" and "books" combination test case to match the actual topology
usage scenario.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-11-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Although drawer was introduced to -smp along with book by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-10-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Although book was introduced to -smp along with drawer by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-9-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, -smp supports 2 more new levels: book and drawer.
It is necessary to consider the effects of book and drawer in the test
cases to ensure that the calculations are correct. This is also the
preparation to add new book and drawer test cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-8-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The q35 machine is trying to support up to 4096 vCPUs [1], so it's
necessary to bump max_cpus in test-smp-parse to 4096 to cover the
topological needs of future machines.
[1]: https://lore.kernel.org/qemu-devel/20240228143351.3967-1-anisinha@redhat.com/
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-7-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use MAX_CPUS/MIN_CPUS macros in invalid topology case. This gives us the
flexibility to change the maximum and minimum CPU limits.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-6-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
