'0' is used as a value to indicate an invalid (or unset)
address. Use a definition instead of a magic value.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-3-f4bug@amsat.org>
Trace addresses provided to the ERASE command.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-2-f4bug@amsat.org>
The Descriptor Table has a bit to allow the DMA to generates
Interrupt when the operation of the descriptor line is completed
(see "1.13.4. Descriptor Table" of 'SD Host Controller Simplified
Specification Version 2.00').
If we have pending interrupt and the descriptor requires it
to be generated as soon as it is completed, reschedule pending
transfers and yield to the CPU.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-5-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-4-f4bug@amsat.org>
If we have pending DMA requests scheduled, process them first.
So far we don't need to implement a bottom half to process them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-3-f4bug@amsat.org>
Add datasheet name in the file header.
We can not add the direct download link since there is a disclaimers
to agree first on the SD Association website (www.sdcard.org).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200901140411.112150-3-f4bug@amsat.org>
Add missing newline character in qemu_log_mask() format.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200901140411.112150-2-f4bug@amsat.org>
USB_XHCI does not depend on PCI any more.
USB_XHCI_SYSBUS must select USB_XHCI not USB.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-5-kraxel@redhat.com
The helper generates an acpi dsdt device entry
for the xhci sysbus device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-4-kraxel@redhat.com
Move a bunch of defines which might be needed outside core xhci
code to that place. Add XHCI_ prefixes to avoid name clashes.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-3-kraxel@redhat.com
Add stubs for aml_interrupt and aml_memory32_fixed,
these will be needed by followup patches,
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-2-kraxel@redhat.com
Setting x86ms->pci_irq_mask to zero has the same effect,
so we don't need the has_pci argument any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-6-kraxel@redhat.com
Makes sure the PCI interrupt overrides are added to the
APIC table in case PCIe is enabled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-5-kraxel@redhat.com
Add a variable to x86 machine state instead of
hard-coding the PCI interrupts.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-4-kraxel@redhat.com
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 7998beb9c2 removed the ram_size initialization in the
arm_boot_info structure, however it is used by arm_load_kernel().
Initialize the field to fix:
$ qemu-system-arm -M n800 -append 'console=ttyS1' \
-kernel meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0
qemu-system-arm: kernel 'meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0' is too large to fit in RAM (kernel size 1964608, RAM size 0)
Noticed while running the test introduced in commit 050a82f0c5
("tests/acceptance: Add a test for the N800 and N810 arm machines").
Fixes: 7998beb9c2 ("arm/nseries: use memdev for RAM")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20201019095148.1602119-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VMStateDescription.fields should be end with VMSTATE_END_OF_LIST().
However, microbit_i2c_vmstate doesn't follow it. Let's change it.
Fixes: 9d68bf564e ("arm: Stub out NRF51 TWI magnetometer/accelerometer detection")
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201019093401.2993833-1-liangpeng10@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The IRQ values are defined few lines earlier, use them instead of
the magic numbers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201017180731.1165871-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add trace events for GPU and CPU IRQs.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201017180731.1165871-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SYS_timer is not directly wired to the ARM core, but to the
SoC (peripheral) interrupt controller.
Fixes: 0e5bbd7406 ("hw/arm/bcm2835_peripherals: Use the SYS_timer")
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This peripheral has 1 free-running timer and 4 compare registers.
Only the free-running timer is implemented. Add support the
COMPARE registers (each register is wired to an IRQ).
Reference: "BCM2835 ARM Peripherals" datasheet [*]
chapter 12 "System Timer":
The System Timer peripheral provides four 32-bit timer channels
and a single 64-bit free running counter. Each channel has an
output compare register, which is compared against the 32 least
significant bits of the free running counter values. When the
two values match, the system timer peripheral generates a signal
to indicate a match for the appropriate channel. The match signal
is then fed into the interrupt controller.
This peripheral is used since Linux 3.7, commit ee4af5696720
("ARM: bcm2835: add system timer").
[*] https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20201010203709.3116542-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The variable holding the CTRL_STATUS register is misnamed
'status'. Rename it 'ctrl_status' to make it more obvious
this register is also used to control the peripheral.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the BCM2835_SYSTIMER_COUNT definition instead of the
magic '4' value.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While APEI is a generic ACPI feature (usable by X86 and ARM64), only
the 'virt' machine uses it, by enabling the RAS Virtualization. See
commit 2afa8c8519: "hw/arm/virt: Introduce a RAS machine option").
Restrict the APEI tables generation code to the single user: the virt
machine. If another machine wants to use it, it simply has to 'select
ACPI_APEI' in its Kconfig.
Fixes: aa16508f1d ("ACPI: Build related register address fields via hardware error fw_cfg blob")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201008161414.2672569-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The time to transmit a char is expressed in nanoseconds, not in ticks.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201014213601.205222-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
xen-save-devices-state doesn't currently generate a vmdesc, so restore
always triggers "Expected vmdescription section, but got 0". This is
not a problem when restore comes from a file. However, when QEMU runs
in a linux stubdom and comes over a console, EOF is not received. This
causes a delay restoring - though it does restore.
Setting suppress-vmdesc skips looking for the vmdesc during restore and
avoids the wait.
The other approach would be generate a vmdesc in qemu_save_device_state.
Since COLO shared that function, and the vmdesc is just discarded on
restore, we choose to skip it.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20201013190506.3325-1-jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Currently a single watch on /local/domain/X/backend is registered by each
QEMU process running in service domain X (where X is usually 0). The purpose
of this watch is to ensure that QEMU is notified when the Xen toolstack
creates a new device backend area.
Such a backend area is specific to a single frontend area created for a
specific guest domain and, since each QEMU process is also created to service
a specfic guest domain, it is unnecessary and inefficient to notify all QEMU
processes.
Only the QEMU process associated with the same guest domain need
receive the notification. This patch re-factors the watch registration code
such that notifications are targetted appropriately.
Reported-by: Jerome Leseinne <jerome.leseinne@gmail.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20201001081500.1026-1-paul@xen.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
There's no references in only file which includes xenguest.h
to any xen definitions. And there's no references to -lxenguest
in qemu, either. Drop it.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200727140048.19779-1-mjt@msgid.tls.msk.ru>
[perard: rebased]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The currently existing 9pfs test cases are all solely using the 9pfs 'synth'
fileystem driver, which is a very simple and purely simulated (in RAM only)
filesystem. There are issues though where the 'synth' fs driver is not
sufficient. For example the following two bugs need test cases running the
9pfs 'local' fs driver:
https://bugs.launchpad.net/qemu/+bug/1336794https://bugs.launchpad.net/qemu/+bug/1877384
This patch set for that reason introduces 9pfs test cases using the 9pfs
'local' filesystem driver along to the already existing tests on 'synth'.
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAl+NiOwXHHFlbXVfb3Nz
QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5VkIw//fP5v3Wx8PUk03Vega7aDjtFN
fpLG1hpyhv/aEYijSrvxNdwuEfT7eWae3yFnc3uEXAv+61sHCuzqsQVRYPi3mO6i
9o2072shPQq5LDgYd8kSyqSOox/06r+9dIqrIFoLh9POYDN25fJGHHmQETXhXaCw
/Vuhm0WvMryEJmuVS7kF4f9znX6dT4P9xgHpVod1tbIAB/vCKOFAqOWiNWS0vNdF
OP0nYQWoYNey9TfX7ZJt1b8av0jLlYfDTcooojQKT70ihMqUSCdOvOIdlMbJj3pU
P/z28xYwAQT1WxLCzV6DskNYCSTsxVakO4lW6JXPLSL2e4TQlzx2lwlUFGzuKKsg
Tmgy5xIB1dXa0LMfjNJ5hQHawcCNQbIYLh2Jw3Qx4Q48SAvi4el9leUtrpXlYDPG
nQ0iuwoaFGd4BHoRk9Q48AVlOj7XelkhsEpREmjXESDgdf2CTw7pQOkuc6Rx/9S6
GjjjWNN4f7MjcfBkQhcmrHVMOWJGrBUn19kgdY4/suqmcR68Tqq56OHLAF9kL55+
mWntjT3GBjML7IW3cWxLPSGvLzE3ydwCrJY8pvzZySJmVGwgeXQ5o25LtwWElmcj
Jf1zXeHQM8+g5qEkpdt1zKH2CrRfkCUofp8N4fP9tFCMmaYS3/oLEDgzGp5dUFIU
nUdUTdEUm/arxRFLd/8=
=TZ2q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20201019' into staging
9pfs: add tests using local fs driver
The currently existing 9pfs test cases are all solely using the 9pfs 'synth'
fileystem driver, which is a very simple and purely simulated (in RAM only)
filesystem. There are issues though where the 'synth' fs driver is not
sufficient. For example the following two bugs need test cases running the
9pfs 'local' fs driver:
https://bugs.launchpad.net/qemu/+bug/1336794https://bugs.launchpad.net/qemu/+bug/1877384
This patch set for that reason introduces 9pfs test cases using the 9pfs
'local' filesystem driver along to the already existing tests on 'synth'.
# gpg: Signature made Mon 19 Oct 2020 13:39:08 BST
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* remotes/cschoenebeck/tags/pull-9p-20201019:
tests/9pfs: add local Tmkdir test
tests/9pfs: add virtio_9p_test_path()
tests/9pfs: wipe local 9pfs test directory
tests/9pfs: introduce local tests
tests/9pfs: change qtest name prefix to synth
9pfs: suppress performance warnings on qtest runs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't trigger any performance warning if we're just running test cases,
because tests intentionally run for edge cases.
So far performance warnings were suppressed for the 'synth' fs driver
backend only. This patch suppresses them for all 9p fs driver backends.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <a2d2ff2163f8853ea782a7a1d4e6f2afd7c29ffe.1603106145.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAl+NPIweHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIf22AH/0e9QXSd2g7YRK2D
3NY/HuHr+lZNkDtNJanIQ9FUbmyzB9fMux4xg7BabpyY89Zwd9viivc6DrkM5fGM
12Yuq1IX/JOvolRvAMszAxUdnlLcB6OHDGrNBDyNFPK4Y87DLm86RJMTviiN/J/G
vsnCDjuxyHYtBruBbB4e6W/0nYJsfFXsopZxfV9Baain3W1uytRUW8WnjHJsvhhe
c7Dl4j5LcmXINtLn577kJIiVgZruk9FqADAnAcUM7+I0QRnhebshAoTpTzYCPAIy
LmUkr5NHtujBsa3m1zI8tjevFhCjvHOYvH6vdrMG6WO8m5DnAnv1iYYuM4xzI0yB
puOyz48=
=ShX6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20201019' into staging
qemu-macppc updates
# gpg: Signature made Mon 19 Oct 2020 08:13:16 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-macppc-20201019:
mac_oldworld: Change PCI address of macio to match real hardware
mac_oldworld: Drop some variables
mac_oldworld: Drop a variable, use get_system_memory() directly
mac_newworld: Allow loading binary ROM image
mac_oldworld: Allow loading binary ROM image
m48t59: remove legacy m48t59_init() function
ppc405_boards: use qdev properties instead of legacy m48t59_init() function
sun4u: use qdev properties instead of legacy m48t59_init() function
sun4m: use qdev properties instead of legacy m48t59_init() function
m48t59-isa: remove legacy m48t59_init_isa() function
uninorth: use qdev gpios for PCI IRQs
grackle: use qdev gpios for PCI IRQs
macio: don't reference serial_hd() directly within the device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
. Fix some comment spelling errors
. Demacro some TCG helpers
. Add loongson-ext lswc2/lsdc2 group of instructions
. Log unimplemented cache opcode
. Increase number of TLB entries on the 34Kf core
. Allow the CPU to use dynamic frequencies
. Calculate the CP0 timer period using the CPU frequency
. Set CPU frequency for each machine
. Fix Malta FPGA I/O region size
. Allow running qtests when ROM is missing
. Add record/replay acceptance tests
. Update MIPS CPU documentation
. MAINTAINERS updates
CI jobs results:
https://gitlab.com/philmd/qemu/-/pipelines/203931842https://travis-ci.org/github/philmd/qemu/builds/736491461https://cirrus-ci.com/build/6272264062631936https://app.shippable.com/github/philmd/qemu/runs/886/summary/console
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl+K+NkACgkQ4+MsLN6t
wN4oPRAArZ5v0fjGrylt9g4xCAygLoSMkH3sZxltB77UVN/dCawSTLK2seKKO5g/
UtGt/j4/OAt8Ms+nF8FT+UZbknkgq+h7coOorHvz6gDEAx9UIg6/S2TRZJEx28+l
LbzkqdxvNSoHRrQDpGo43xoaxjzCxSTSOKpPfje6p2YDxWjkxdr/ahcsbKHSKc+x
uGdVdEAlLiAs/fBhkaJD3yy1VfqJKu8V5JJo1g4gSQOD1worRbZ4Us9QfuYr79Q7
Kce1Z1MQSf/TceZuDubhzZBep5lF1uW4lTywcaDby0LvGNK4K+RnH+i+t7CNhtKs
LH5j6iFQY1ecjb1Vh0IgKNAFaM2sTtO7A6fbBSOkVTO60wEp7i9fpbI5TRIjv7z/
EBkzP3n00hhbFFDci6Lnh/Ko0Xy0ODe3Um5l410sTnJe9+LK0HR5V6WH8PD/wKV2
nnKzSgb1U51KS6+FzLGLbQzDEvCgRKAJ9mwiQ+dlRfFHj+rEM6a9rlQmtsADBhKi
sEx62BKe6mM/+qQL9AOwZ5xBmFAn6wquuLYoA2Bwfg0wPIiAiFTwrz/eVSm9qYsw
O9Fer+1IMmd06T1REUtSDAh8+D2ekknKmFA3AG0818WvluD0Qm3KZp8uLLHJ/XkO
jiRtmeW+hApeh8hP4E0bzmrfJPKseBCYYP1By7XavIOoCxlqhew=
=BOxw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-next-20201017' into staging
MIPS patches queue
. Fix some comment spelling errors
. Demacro some TCG helpers
. Add loongson-ext lswc2/lsdc2 group of instructions
. Log unimplemented cache opcode
. Increase number of TLB entries on the 34Kf core
. Allow the CPU to use dynamic frequencies
. Calculate the CP0 timer period using the CPU frequency
. Set CPU frequency for each machine
. Fix Malta FPGA I/O region size
. Allow running qtests when ROM is missing
. Add record/replay acceptance tests
. Update MIPS CPU documentation
. MAINTAINERS updates
CI jobs results:
https://gitlab.com/philmd/qemu/-/pipelines/203931842https://travis-ci.org/github/philmd/qemu/builds/736491461https://cirrus-ci.com/build/6272264062631936https://app.shippable.com/github/philmd/qemu/runs/886/summary/console
# gpg: Signature made Sat 17 Oct 2020 14:59:53 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/mips-next-20201017: (44 commits)
target/mips: Increase number of TLB entries on the 34Kf core (16 -> 64)
MAINTAINERS: Remove duplicated Malta test entries
MAINTAINERS: Downgrade MIPS Boston to 'Odd Fixes', fix Paul Burton mail
MAINTAINERS: Put myself forward for MIPS target
MAINTAINERS: Remove myself
docs/system: Update MIPS CPU documentation
tests/acceptance: Add MIPS record/replay tests
hw/mips: Remove exit(1) in case of missing ROM
hw/mips: Rename TYPE_MIPS_BOSTON to TYPE_BOSTON
hw/mips: Simplify code using ROUND_UP(INITRD_PAGE_SIZE)
hw/mips: Simplify loading 64-bit ELF kernels
hw/mips/malta: Use clearer qdev style
hw/mips/malta: Move gt64120 related code together
hw/mips/malta: Fix FPGA I/O region size
target/mips/cpu: Display warning when CPU is used without input clock
hw/mips/cps: Do not allow use without input clock
hw/mips/malta: Set CPU frequency to 320 MHz
hw/mips/boston: Set CPU frequency to 1 GHz
hw/mips/cps: Expose input clock and connect it to CPU cores
hw/mips/jazz: Correct CPU frequencies
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check the value of mps to avoid potential divide-by-zero later in the function.
Since HCCHAR_MPS is guest controllable, this prevents a malicious/buggy guest
from crashing the QEMU process on the host.
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Paul Zimmerman <pauldzim@gmail.com>
Reported-by: Gaoning Pan <gaoning.pgn@antgroup.com>
Reported-by: Xingwei Lin <linyi.lxw@antfin.com>
Message-id: 20201015075957.268823-1-mcascell@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The EHCI Host Controller emulation attempt to locate the device
associated with a periodic isochronous transfer description (iTD) and
when this fail the host controller is reset.
But according the EHCI spec 1.0 section 5.15.2.4 Host System
Error, the host controller is supposed to reset itself only when it
failed to communicate with the Host (Operating System), like when
there's an error on the PCI bus. If a transaction fails, there's
nothing in the spec that say to reset the host controller.
This patch rework the error path so that the host controller can keep
working when the OS setup a bogus transaction, it also revert to the
behavior of the EHCI emulation to before commits:
e94682f1fe ("ehci: check device is not NULL before calling usb_ep_get()")
7011baece2 ("usb: remove unnecessary NULL device check from usb_ep_get()")
The issue has been found while trying to passthrough a USB device to a
Windows Server 2012 Xen guest via "usb-ehci", which prevent the USB
device from working in Windows. ("usb-ehci" alone works, windows only
setup this weird periodic iTD to device 127 endpoint 15 when the USB
device is passthrough.)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 20201014104106.2962640-1-anthony.perard@citrix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change several assert()s to qemu_log_mask(LOG_GUEST_ERROR...),
to prevent the guest from causing Qemu to assert. Also fix up
several existing qemu_log_mask()s to include the function name in
the message.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200920021449.830-1-pauldzim@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The board firmware expect these to be at fixed addresses and programs
them without probing, this patch puts the macio device at the expected
PCI address.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <f14bcaf3cf129500710ba5289980a134086bd949.1602805637.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Values not used frequently enough may not worth putting in a local
variable, especially with names almost as long as the original value
because that does not improve readability, to the contrary it makes it
harder to see what value is used. Drop a few such variables.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <d67bc8d914a366ca6822b5190c1308d31af5c9b3.1602805637.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Half of the occurances already use get_system_memory() directly
instead of sysmem variable, convert the two other uses to
get_system_memory() too which seems to be more common and drop the
variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b4c714e03690deb6f94f80f7a5b2af47d90550ae.1602805637.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fall back to load binary ROM image if loading ELF fails. This also
moves PROM_BASE and PROM_SIZE defines to board as these are matching
the ROM size and address on this board and removes the now unused
PROM_ADDR and BIOS_SIZE defines from common mac.h.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <4d58ffe7645a0c746c8fed6aa8775c0867b624e0.1602805637.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The beige G3 Power Macintosh has a 4MB firmware ROM. Fix the size of
the rom region and fall back to loading a binary image with -bios if
loading ELF image failed. This allows testing emulation with a ROM
image from real hardware as well as using an ELF OpenBIOS image.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201017155139.5A36A746331@zero.eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all of the callers of this function have been switched to use qdev
properties, this legacy init function can now be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201016182739.22875-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is no longer used within the codebase.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201016182739.22875-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently an object link property is used to pass a reference to the OpenPIC
into the PCI host bridge so that pci_unin_init_irqs() can connect the PCI
IRQs to the PIC itself.
This can be simplified by defining the PCI IRQs as qdev gpios and then wiring
up the PCI IRQs to the PIC in the New World machine init function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201013114922.2946-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently an object link property is used to pass a reference to the Heathrow
PIC into the PCI host bridge so that grackle_init_irqs() can connect the PCI
IRQs to the PIC itself.
This can be simplified by defining the PCI IRQs as qdev gpios and then wiring
up the PCI IRQs to the PIC in the Old World machine init function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201013114922.2946-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead use qdev_prop_set_chr() to configure the ESCC serial chardevs at the
Mac Old World and New World machine level.
Also remove the now obsolete comment referring to the use of serial_hd() and
the setting of user_creatable to false accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201013114922.2946-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This patch updates MIPS-based machines to allow starting them without ROM.
In this case CPU starts to execute instructions from the empty memory,
but QEMU allows introspecting the machine configuration.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <159531210571.24117.231100997794891819.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will make the type name constant consistent with the name of
the type checking macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200902224311.1321159-19-ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of using a INITRD_PAGE_MASK definition, use the
simpler INITRD_PAGE_SIZE one which allows us to simplify
the code by using directly the self-explicit ROUND_UP()
macro.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200927163943.614604-3-f4bug@amsat.org>
Since 8279006411 ("Cast ELF datatypes properly to host 64bit types")
we don't need to sign-extend the entry_point address. Remove this
unnecessary code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200927163943.614604-2-f4bug@amsat.org>
In order to be consistent with the other code base uses,
rewrite slightly how the MIPS_MALTA object is created.
No logical change.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201012160503.3472140-3-f4bug@amsat.org>
The 'empty_slot' region created is related to the gt64120.
Move its creation close to the gt64120 instance creation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201012160503.3472140-2-f4bug@amsat.org>
The FPGA present on the CoreCard has an I/O region 1MiB wide.
Refs:
- Atlas User’s Manual (Document Number: MD00005)
- Malta User’s Manual (Document Number: MD00048)
Fixes: ea85df72b6 ("mips_malta: convert to memory API")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200905213049.761949-1-f4bug@amsat.org>
Now than all QOM users provides the input clock, do not allow
using a CPS without input clock connected.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-21-f4bug@amsat.org>
The CoreLV card with ID 0x420's CPU clocked at 320 MHz. Create
a 'cpuclk' output clock and connect it to the CPU input clock.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-20-f4bug@amsat.org>
The I6400 can run at 1 GHz or more. Create a 'cpuclk'
output clock and connect it to the CPU input clock.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-19-f4bug@amsat.org>
Expose a qdev input clock named 'clk-in', and connect it to each
core to forward-propagate the clock.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-18-f4bug@amsat.org>
The Magnum 4000PC CPU runs at 100 MHz, and the Acer PICA-61
CPU at ~134 MHz.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-17-f4bug@amsat.org>
The MIPSsim machine CPU frequency is too fast running at 200 MHz,
while it should be 12 MHz for the 24K and 6 MHz for the 5K core.
Ref: Linux commit c78cbf49c4ed
("Support for MIPSsim, the cycle accurate MIPS simulator.")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-16-f4bug@amsat.org>
The CPU frequency is normally provided by the firmware in the
"cpuclock" environment variable. The 2E board can handles up
to 660MHz, but be conservative and take the same value used
by the Linux kernel: 533 MHz.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201012095804.3335117-15-f4bug@amsat.org>
Since its introduction in commit 6af0bf9c7c,
the 'r4k' machine runs at 200 MHz.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-14-f4bug@amsat.org>
This function creates a clock and parents it to another object with a
given name. It calls clock_setup_canonical_path before returning the
new clock.
This function is useful to create clocks in devices when one doesn't
want to expose it at the qdev level (as an input or an output).
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201010135759.437903-4-luc@lmichel.fr>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of directly aborting, display a hint to help the developer
figure out the problem (likely trying to connect a clock to a device
pre-dating the Clock API, thus not expecting clocks).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20201012095804.3335117-4-f4bug@amsat.org>
Implement the ability of marking some versions deprecated. When
that CPU model is chosen, print a warning. The warning message
can be customized, e.g. suggesting an alternative CPU model to be
used instead.
The deprecation message will be printed by x86_cpu_list_entry(),
e.g. '-cpu help'.
QMP command 'query-cpu-definitions' will return a bool value
indicating the deprecation status.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-1-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword commit message]
[ehabkost: Handle NULL cpu_type]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As IRQ routing is always available on x86,
kvm_allows_irq0_override() will always return true, so we don't
need the function anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200922201922.2153598-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM_CAP_IRQ_ROUTING is always available on x86, so replace checks
for kvm_has_gsi_routing() and KVM_CAP_IRQ_ROUTING with asserts.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200922201922.2153598-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200921221045.699690-22-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
'occupied' is spelled like 'ocuppied' in the message.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006133958.600932-1-jusual@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As the 'timestamp' variable is declared as a 48-bit bitfield,
we do not need to wrap the sum result.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20201002075716.1657849-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently scsi_target_emulate_report_luns iterates over the child device list
twice, and there is no guarantee that this list is the same in both iterations.
The reason for iterating twice is that the first iteration calculates
how much memory to allocate. However if we use a dynamic array we can
avoid iterating twice, and therefore we avoid this race.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1866707
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200913160259.32145-10-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-14-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will help us to avoid the scsi device disappearing
after we took a reference to it.
It doesn't by itself forbid case when we try to access
an unrealized device
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200913160259.32145-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-13-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add scsi_device_get which finds the scsi device
and takes a reference to it.
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200913160259.32145-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-12-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The device core first places a device on the bus and then realizes it.
Make scsi_device_find avoid returing such devices to avoid
races in drivers that use an iothread (currently virtio-scsi)
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1812399
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200913160259.32145-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-11-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some code might race with placement of new devices on a bus.
We currently first place a (unrealized) device on the bus
and then realize it.
As a workaround, users that scan the child device list, can
check the realized property to see if it is safe to access such a device.
Use an atomic write here too to aid with this.
A separate discussion is what to do with devices that are unrealized:
It looks like for this case we only call the hotplug handler's unplug
callback and its up to it to unrealize the device.
An atomic operation doesn't cause harm for this code path though.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200913160259.32145-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-10-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the race between device emulation code that tries to find
a child device to dispatch the request to (e.g a scsi disk),
and hotplug of a new device to that bus.
Note that this doesn't convert all the readers of the list
but only these that might go over that list without BQL held.
This is a very small first step to make this code thread safe.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200913160259.32145-5-mlevitsk@redhat.com>
[Use RCU_READ_LOCK_GUARD in more places, adjust testcase now that
the delay in DEVICE_DELETED due to RCU is more consistent. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change will allow us to convert the bus children list to RCU,
while not changing the logic of this function
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200913160259.32145-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check if an address is free on the bus before plugging in the
device. This makes it possible to do the check without any
side effects, and to detect the problem early without having
to do it in the realize callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the FW_CFG_DATA_GENERATOR_INTERFACE is only consumed
by a device only available using system-mode (fw_cfg), it is
implemented by a crypto component (tls-cipher-suites) which
is always available when crypto is used.
Commit 69699f3055 introduced the following error in the
qemu-storage-daemon binary:
$ echo -e \
'{"execute": "qmp_capabilities"}\r\n{"execute": "qom-list-types"}\r\n{"execute": "quit"}\r\n' \
| storage-daemon/qemu-storage-daemon --chardev stdio,id=qmp0 --monitor qmp0
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 1, "major": 5}, "package": ""}, "capabilities": ["oob"]}}
{"return": {}}
missing interface 'fw_cfg-data-generator' for object 'tls-creds'
Aborted (core dumped)
Since QOM dependencies are resolved at runtime, this issue
could not be triggered at linktime, and we don't have test
running the qemu-storage-daemon binary.
Fix by always registering the QOM interface.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Fixes: 69699f3055 ("crypto/tls-cipher-suites: Produce fw_cfg consumable blob")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006111909.2302081-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent change to weak reset handling broke replay due to the use of
aio_bh_schedule_oneshot instead of the replay aware
replay_bh_schedule_oneshot_event.
Fixes: 55adb3c456 ("ide: cancel pending callbacks on SRST")
Suggested-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20201007160038.26953-4-alex.bennee@linaro.org>
In commit 102ca9667d we set "start-powered-off" on all vCPUs
included in the CPS (Coherent Processing System) but forgot to
start the vCPUS on when they are powered on in the CPC (Cluster
Power Controller).
This fixes the following tests:
$ avocado run tests/acceptance/machine_mips_malta.py
(1/3) test_mips_malta_i6400_framebuffer_logo_1core: PASS (3.67 s)
(2/3) test_mips_malta_i6400_framebuffer_logo_7cores: INTERRUPTED: Test interrupted by SIGTERM (30.22 s)
(3/3) test_mips_malta_i6400_framebuffer_logo_8cores: INTERRUPTED: Test interrupted by SIGTERM (30.25 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 2 | CANCEL 0
Fixes: 102ca9667d ("mips/cps: Use start-powered-off CPUState property")
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201007113942.2523866-1-f4bug@amsat.org>
Message-Id: <20201007160038.26953-3-alex.bennee@linaro.org>
Here's the next set of ppc related patches for qemu-5.2. There are
two main things here:
* Cleanups to error handling in spapr from Greg Kurz
* Improvements to NUMA handling for spapr from Daniel Barboza
There are also a handful of other bugfixes.
-----BEGIN PGP SIGNATURE-----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=dbvK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201009' into staging
ppc patch queue 2020-10-09
Here's the next set of ppc related patches for qemu-5.2. There are
two main things here:
* Cleanups to error handling in spapr from Greg Kurz
* Improvements to NUMA handling for spapr from Daniel Barboza
There are also a handful of other bugfixes.
# gpg: Signature made Fri 09 Oct 2020 07:02:29 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20201009:
specs/ppc-spapr-numa: update with new NUMA support
spapr_numa: consider user input when defining associativity
spapr_numa: change reference-points and maxdomain settings
spapr_numa: forbid asymmetrical NUMA setups
spapr: add spapr_machine_using_legacy_numa() helper
ppc/pnv: Increase max firmware size
spapr: Add a return value to spapr_check_pagesize()
spapr: Add a return value to spapr_nvdimm_validate()
spapr: Simplify error handling in spapr_cpu_core_realize()
spapr: Add a return value to spapr_set_vcpu_id()
spapr: Simplify error handling in prop_get_fdt()
spapr: Add a return value to spapr_drc_attach()
spapr: Simplify error handling in spapr_vio_busdev_realize()
spapr: Simplify error handling in do_client_architecture_support()
spapr: Get rid of cas_check_pvr() error reporting
spapr: Simplify error handling in callers of ppc_set_compat()
ppc: Fix return value in cpu_post_load() error path
ppc: Add a return value to ppc_set_compat() and ppc_set_compat_all()
spapr: Fix error leak in spapr_realize_vcpu()
spapr: Handle HPT allocation failure in nested guest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Most callers actually don't have to rely on cur_mon, but already know
for which monitor they call monitor_get_cpu_index().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-3-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A new function called spapr_numa_define_associativity_domains()
is created to calculate the associativity domains and change
the associativity arrays considering user input. This is how
the associativity domain between two NUMA nodes A and B is
calculated:
- get the distance D between them
- get the correspondent NUMA level 'n_level' for D. This is done
via a helper called spapr_numa_get_numa_level()
- all associativity arrays were initialized with their own
numa_ids, and we're calculating the distance in node_id ascending
order, starting from node id 0 (the first node retrieved by
numa_state). This will have a cascade effect in the algorithm because
the associativity domains that node 0 defines will be carried over to
other nodes, and node 1 associativities will be carried over after
taking node 0 associativities into account, and so on. This
happens because we'll assign assoc_src as the associativity domain
of dst as well, for all NUMA levels beyond and including n_level.
The PPC kernel expects the associativity domains of the first node
(node id 0) to be always 0 [1], and this algorithm will grant that
by default.
Ultimately, all of this results in a best effort approximation for
the actual NUMA distances the user input in the command line. Given
the nature of how PAPR itself interprets NUMA distances versus the
expectations risen by how ACPI SLIT works, there might be better
algorithms but, in the end, it'll also result in another way to
approximate what the user really wanted.
To keep this commit message no longer than it already is, the next
patch will update the existing documentation in ppc-spapr-numa.rst
with more in depth details and design considerations/drawbacks.
[1] https://lore.kernel.org/linuxppc-dev/5e8fbea3-8faf-0951-172a-b41a2138fbcf@gmail.com/
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-5-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the first guest visible change introduced in
spapr_numa.c. The previous settings of both reference-points
and maxdomains were too restrictive, but enough for the
existing associativity we're setting in the resources.
We'll change that in the following patches, populating the
associativity arrays based on user input. For those changes
to be effective, reference-points and maxdomains must be
more flexible. After this patch, we'll have 4 distinct
levels of NUMA (0x4, 0x3, 0x2, 0x1) and maxdomains will
allow for any type of configuration the user intends to
do - under the scope and limitations of PAPR itself, of
course.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pSeries machine does not support asymmetrical NUMA
configurations. This doesn't make much of a different
since we're not using user input for pSeries NUMA setup,
but this will change in the next patches.
To avoid breaking existing setups, gate this change by
checking for legacy NUMA support.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The changes to come to NUMA support are all guest visible. In
theory we could just create a new 5_1 class option flag to
avoid the changes to cascade to 5.1 and under. The reality is that
these changes are only relevant if the machine has more than one
NUMA node. There is no need to change guest behavior that has
been around for years needlesly.
This new helper will be used by the next patches to determine
whether we should retain the (soon to be) legacy NUMA behavior
in the pSeries machine. The new behavior will only be exposed
if:
- machine is pseries-5.2 and newer;
- more than one NUMA node is declared in NUMA state.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Builds enabling GCOV can be bigger than 4MB and the limit on FSP
systems is 16MB.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201002091440.1349326-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-14-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-13-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", add a bool return value to
spapr_realize_vcpu() and use it in spapr_cpu_core_realize()
in order to get rid of the error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-12-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-11-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the return value of visit_check_struct() and visit_check_list()
for error checking instead of local_err. This allows to get rid of
the error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-10-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-9-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the return value of spapr_irq_findone() and spapr_irq_claim()
to detect failures. This allows to reduce the error propagation
overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-8-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the return value of ppc_set_compat_all() to check failures,
which is preferred over hijacking local_err.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-7-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cas_check_pvr() function has two purposes:
- finding the "best" logical PVR, ie. the most recent one supported by
the guest for this CPU type
- checking if the guest supports the real PVR of this CPU type, which
is just an optional extra information to workaround the lack of
support for "compat" mode in PR KVM
This logic doesn't need error reporting, really. If we don't find a
suitable logical PVR, we return the special value 0 which is definitely
not a valid PVR. Let the caller decide on whether it should error out
or not.
This doesn't change the behavior.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-6-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that ppc_set_compat() indicates success/failure with a return
value, use it and reduce error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-5-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The nested KVM code does not yet support HPT guests. Calling the
KVM_CAP_PPC_ALLOC_HTAB ioctl currently leads to KVM setting the guest
as HPT and erroneously executing code in L1 that should only run in
hypervisor mode, leading to an exception in the L1 vcpu thread when it
enters the nested guest.
This can be reproduced with -machine max-cpu-compat=power8 in the L2
guest command line.
The KVM code has since been modified to fail the ioctl when running in
a nested environment so QEMU needs to be able to handle that. This
patch provides an error message informing the user about the lack of
support for HPT in nested guests.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20200911043123.204162-1-farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the KVM PMU setup part of fdt_add_pmu_nodes() to
virt_cpu_post_init(), which is a more appropriate location. Now
fdt_add_pmu_nodes() is also named more appropriately, because it
no longer does anything but fdt node creation.
No functional change intended.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We'll add more to this new function in coming patches so we also
state the gic must be created and call it below create_gic().
No functional change intended.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "BCM2835 ARM Peripherals" datasheet [*] chapter 2
("Auxiliaries: UART1 & SPI1, SPI2"), list the register
sizes as 3/8/16/32 bits. We assume this means this
peripheral allows 8-bit accesses.
This was not an issue until commit 5d971f9e67 which reverted
("memory: accept mismatching sizes in memory_region_access_valid").
The model is implemented as 32-bit accesses (see commit 97398d900c,
all registers are 32-bit) so replace MemoryRegionOps.valid as
MemoryRegionOps.impl, and re-introduce MemoryRegionOps.valid
with a 8/32-bit range.
[*] https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Fixes: 97398d900c ("bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201002181032.1899463-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Original commit did not allocate IRQs for the SMMUv3 in the irqmap
effectively using irq 0->3 (shared with other devices). Assuming
original intent was to allocate unique IRQs then add an allocation
to the irqmap.
Fixes: e9fdf45324 ("hw/arm: Add arm SBSA reference machine, devices part")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-3-graeme@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMMUv3 has an error in a previous patch where an i was transposed to a 1
meaning interrupts would not have been correctly assigned to the SMMUv3
instance.
Fixes: 48ba18e6d3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state")
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-2-graeme@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix integer handling issues handling issue reported by Coverity:
hw/ssi/npcm7xx_fiu.c: 162 in npcm7xx_fiu_flash_read()
>>> CID 1432730: Integer handling issues (NEGATIVE_RETURNS)
>>> "npcm7xx_fiu_cs_index(fiu, f)" is passed to a parameter that cannot be negative.
162 npcm7xx_fiu_select(fiu, npcm7xx_fiu_cs_index(fiu, f));
hw/ssi/npcm7xx_fiu.c: 221 in npcm7xx_fiu_flash_write()
218 cs_id = npcm7xx_fiu_cs_index(fiu, f);
219 trace_npcm7xx_fiu_flash_write(DEVICE(fiu)->canonical_path, cs_id, addr,
220 size, v);
>>> CID 1432729: Integer handling issues (NEGATIVE_RETURNS)
>>> "cs_id" is passed to a parameter that cannot be negative.
221 npcm7xx_fiu_select(fiu, cs_id);
Since the index of the flash can not be negative, return an
unsigned type.
Reported-by: Coverity (CID 1432729 & 1432730: NEGATIVE_RETURNS)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200919132435.310527-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Spec[1] defines 0 - 3 level memory side cache, however QEMU
CLI allows to specify an intermediate cache level without
specifying previous level. Such option(s) silently ignored
when building HMAT table, which leads to incomplete cache
information.
Make sure that previous level exists and error out
if it hasn't been provided.
1) ACPI 6.2A 5.2.27.5 Memory Side Cache Information Structure
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1842877
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201006150002.1601845-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
cpu_common_reset() uses tcg_flush_softmmu_tlb() which is
declared in "exec/cpu-common.h". Add the missing header
to avoid when refactoring other headers:
hw/core/cpu.c: In function ‘cpu_common_reset’:
hw/core/cpu.c:273:9: error: implicit declaration of function ‘tcg_flush_softmmu_tlb’ [-Werror=implicit-function-declaration]
273 | tcg_flush_softmmu_tlb(cpu);
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908123433.105706-1-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move properties specific to machines into a separate file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930164949.1425294-9-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We are going to split this file and reuse these static functions.
Declare them in the local "qdev-prop-internal.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930164949.1425294-8-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We are going to split this file and reuse these static functions.
Add the local "qdev-prop-internal.h" header declaring them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930164949.1425294-6-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We will soon move this code, fix its style to avoid checkpatch.pl
to complain.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930164949.1425294-5-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Replace strtoul() by qemu_strtoul() so checkpatch.pl won't complain
if we move this code later.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930164949.1425294-4-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The MACAddr structure contains an array of uint8_t. Previously
if a value was out of the [0..255] range, it was silently casted
and no input validation was done.
Replace strtol() by qemu_strtol() -- so checkpatch.pl won't
complain if we move this code later -- and return EINVAL if the
input is invalid.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930164949.1425294-3-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
kvm: uses the generic handler
qtest: uses the generic handler
whpx: changed to use the generic handler (identical implementation)
hax: changed to use the generic handler (identical implementation)
hvf: changed to use the generic handler (identical implementation)
tcg: adapt tcg-cpus to point to the tcg-specific handler
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new interface starts unused, will start being used by the
next patches.
It provides methods for each accelerator to start a vcpu, kick a vcpu,
synchronize state, get cpu virtual clock and elapsed ticks.
In qemu_wait_io_event, make it clear that APC is used only for HAX
on Windows.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vfio_get_dev_region_info() unconditionally allocates memory
for a passed-in vfio_region_info structure (and does not re-use
an already allocated structure). Therefore, we have to free
the structure we pass to that function in vfio_ccw_get_region()
for every region we successfully obtained information for.
Fixes: 8fadea24de ("vfio-ccw: support async command subregion")
Fixes: 46ea3841ed ("vfio-ccw: Add support for the schib region")
Fixes: f030532f2a ("vfio-ccw: Add support for the CRW region and IRQ")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200928101701.13540-1-cohuck@redhat.com>
DIAGNOSE 0x318 (diag318) is an s390 instruction that allows the storage
of diagnostic information that is collected by the firmware in the case
of hardware/firmware service events.
QEMU handles the instruction by storing the info in the CPU state. A
subsequent register sync will communicate the data to the hypervisor.
QEMU handles the migration via a VM State Description.
This feature depends on the Extended-Length SCCB (els) feature. If
els is not present, then a warning will be printed and the SCLP bit
that allows the Linux kernel to execute the instruction will not be
set.
Availability of this instruction is determined by byte 134 (aka fac134)
bit 0 of the SCLP Read Info block. This coincidentally expands into the
space used for CPU entries, which means VMs running with the diag318
capability may not be able to read information regarding all CPUs
unless the guest kernel supports an extended-length SCCB.
This feature is not supported in protected virtualization mode.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-9-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As more features and facilities are added to the Read SCP Info (RSCPI)
response, more space is required to store them. The space used to store
these new features intrudes on the space originally used to store CPU
entries. This means as more features and facilities are added to the
RSCPI response, less space can be used to store CPU entries.
With the Extended-Length SCCB (ELS) facility, a KVM guest can execute
the RSCPI command and determine if the SCCB is large enough to store a
complete reponse. If it is not large enough, then the required length
will be set in the SCCB header.
The caller of the SCLP command is responsible for creating a
large-enough SCCB to store a complete response. Proper checking should
be in place, and the caller should execute the command once-more with
the large-enough SCCB.
This facility also enables an extended SCCB for the Read CPU Info
(RCPUI) command.
When this facility is enabled, the boundary violation response cannot
be a result from the RSCPI, RSCPI Forced, or RCPUI commands.
In order to tolerate kernels that do not yet have full support for this
feature, a "fixed" offset to the start of the CPU Entries within the
Read SCP Info struct is set to allow for the original 248 max entries
when this feature is disabled.
Additionally, this is introduced as a CPU feature to protect the guest
from migrating to a machine that does not support storing an extended
SCCB. This could otherwise hinder the VM from being able to read all
available CPU entries after migration (such as during re-ipl).
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-7-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The start of the CPU entry region in the Read SCP Info response data is
denoted by the offset_cpu field. As such, QEMU needs to begin creating
entries at this address.
This is in preparation for when Read SCP Info inevitably introduces new
bytes that push the start of the CPUEntry field further away.
Read CPU Info is unlikely to ever change, so let's not bother
accounting for the offset there.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-6-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The SCCB must be checked for a sufficient length before it is filled
with any data. If the length is insufficient, then the SCLP command
is suppressed and the proper response code is set in the SCCB header.
While we're at it, let's cleanup the length check by placing the
calculation inside a macro.
Fixes: 832be0d8a3 ("s390x: sclp: Report insufficient SCCB length")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-5-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The header contained within the SCCB passed to the SCLP service call
contains the actual length of the SCCB. Instead of allocating a static
4K size for the work sccb, let's allow for a variable size determined
by the value in the header. The proper checks are already in place to
ensure the SCCB length is sufficent to store a full response and that
the length does not cross any explicitly-set boundaries.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-4-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Functions within read scp/cpu info will need access to the machine
state. Let's make a call to retrieve the machine state once and
pass the appropriate data to the respective functions.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-2-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The SRST implementation did not keep up with the rest of IDE; it is
possible to perform a weak reset on an IDE device to remove the BSY/DRQ
bits, and then issue writes to the control/device registers which can
cause chaos with the state machine.
Fix that by actually performing a real reset.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: https://bugs.launchpad.net/qemu/+bug/1878253
Fixes: https://bugs.launchpad.net/qemu/+bug/1887303
Fixes: https://bugs.launchpad.net/qemu/+bug/1887309
Signed-off-by: John Snow <jsnow@redhat.com>
Not known to fix any bug, but I couldn't help but notice that ATA
specifies that writing to this register should clear an interrupt.
ATA7: Section 5.3.3 (Command register - Effect)
ATA6: Section 7.4.4 (Command register - Effect)
ATA5: Section 7.4.4 (Command register - Effect)
ATA4: Section 7.4.4 (Command register - Effect)
ATA3: Section 5.2.2 (Command register)
Other editions: try searching for the phrase "Writing this register".
Signed-off-by: John Snow <jsnow@redhat.com>
(In QEMU, we call this the "select" register.)
My memory isn't good enough to memorize what these magic runes
do. Label them to prevent mixups from happening in the future.
Side note: I assume it's safe to always set 0xA0 even though ATA2 claims
these bits are reserved, because ATA3 immediately reinstated that these
bits should be always on. ATA4 and subsequent specs only claim that the
fields are obsolete, so I assume it's safe to leave these set and that
it should work with the widest array of guests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reorder these just a pinch to make them more obvious at a glance what
the addressing mode is.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
I have been staring at this FIXME for years and I never knew what it
meant. I finally stumbled across it!
When writing to the command registers, the old value is shifted into a
HOB copy of the register and the new value is written into the primary
register. When reading registers, the value retrieved is dependent on
the HOB bit in the CONTROL register.
By setting bit 7 (0x80) in CONTROL, any register read will, if it has
one, yield the HOB value for that register instead.
Our code has a problem: We were using bit 7 of the DEVICE register to
model this. We use bus->cmd roughly as the control register already, as
it stores the value from ide_ctrl_write.
Lastly, all command register writes reset the HOB, so fix that, too.
Signed-off-by: John Snow <jsnow@redhat.com>
In real ISA operation, register writes go out to an entire bus channel
and all listening devices receive the write. The devices do not toggle
the DEV bit based on their own configuration, nor does the HBA
intermediate or tamper with that value.
The reality of the matter is that DEV0/DEV1 accordingly will react to
command register writes based on whether or not the device was selected.
This does not fix a known bug, but it makes the code slightly simpler
and more obvious.
Signed-off-by: John Snow <jsnow@redhat.com>
It's the Control register, part of the Control block -- Command is
misleading here. Rename all related functions and constants.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
libFuzzer triggered the following assertion:
cat << EOF | qemu-system-i386 -M pc-q35-5.0 \
-nographic -monitor none -serial none -qtest stdio
outl 0xcf8 0x8000fa24
outl 0xcfc 0xe1068000
outl 0xcf8 0x8000fa04
outw 0xcfc 0x7
outl 0xcf8 0x8000fb20
write 0xe1068304 0x1 0x21
write 0xe1068318 0x1 0x21
write 0xe1068384 0x1 0x21
write 0xe1068398 0x2 0x21
EOF
qemu-system-i386: exec.c:3621: address_space_unmap: Assertion `mr != NULL' failed.
Aborted (core dumped)
This is because we don't check the return value from dma_memory_map()
which can return NULL, then we call dma_memory_unmap(NULL) which is
illegal. Fix by only unmap if the value is not NULL (and the size is
not the expected one).
Cc: qemu-stable@nongnu.org
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200718072854.7001-1-f4bug@amsat.org
Fixes: f6ad2e32f8 ("ahci: add ahci emulation")
BugLink: https://bugs.launchpad.net/qemu/+bug/1884693
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
* Make isar_feature_aa32_fp16_arith() handle M-profile
* Fix SVE splice
* Fix SVE LDR/STR
* Remove ignore_memory_transaction_failures on the raspi2
* raspi: Various cleanup/refactoring
-----BEGIN PGP SIGNATURE-----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=vKOh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201001' into staging
target-arm queue:
* Make isar_feature_aa32_fp16_arith() handle M-profile
* Fix SVE splice
* Fix SVE LDR/STR
* Remove ignore_memory_transaction_failures on the raspi2
* raspi: Various cleanup/refactoring
# gpg: Signature made Thu 01 Oct 2020 15:46:47 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20201001:
hw/arm/raspi: Remove use of the 'version' value in the board code
hw/arm/raspi: Use RaspiProcessorId to set the firmware load address
hw/arm/raspi: Introduce RaspiProcessorId enum
hw/arm/raspi: Use more specific machine names
hw/arm/raspi: Avoid using TypeInfo::class_data pointer
hw/arm/raspi: Move arm_boot_info structure to RaspiMachineState
hw/arm/raspi: Load the firmware on the first core
hw/arm/raspi: Display the board revision in the machine description
hw/arm/raspi: Remove ignore_memory_transaction_failures on the raspi2
hw/arm/bcm2835: Add more unimplemented peripherals
hw/arm/raspi: Define various blocks base addresses
target/arm: Fix SVE splice
target/arm: Fix sve ldr/str
target/arm: Make isar_feature_aa32_fp16_arith() handle M-profile
target/arm: Add ID register values for Cortex-M0
hw/intc/armv7m_nvic: Only show ID register values for Main Extension CPUs
target/arm: Move id_pfr0, id_pfr1 into ARMISARegisters
target/arm: Replace ARM_FEATURE_PXN with ID_MMFR0.VMSA check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We expected the 'version' ID to match the board processor ID,
but this is not always true (for example boards with revision
id 0xa02042/0xa22042 are Raspberry Pi 2 with a BCM2837 SoC).
This was not important because we were not modelling them, but
since the recent refactor now allow to model these boards, it
is safer to check the processor id directly. Remove the version
check.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The firmware load address depends on the SoC ("processor id") used,
not on the version of the board.
Suggested-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we only support a reduced set of the REV_CODE_PROCESSOR id
encoded in the board revision, define the PROCESSOR_ID values
as an enum. We can simplify the board_soc_type and cores_count
methods.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we can instantiate different machines based on their
board_rev register value, we can have various raspi2 and raspi3.
In commit fc78a990ec we corrected the machine description.
Correct the machine names too. For backward compatibility, add
an alias to the previous generic name.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using class_data pointer to create a MachineClass is not
the recommended way anymore. The correct way is to open-code
the MachineClass::fields in the class_init() method.
We can not use TYPE_RASPI_MACHINE::class_base_init() because
it is called *before* each machine class_init(), therefore the
board_rev field is not populated. We have to manually call
raspi_machine_class_common_init() for each machine.
This partly reverts commit a03bde3674.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm_boot_info structure belong to the machine,
move it to RaspiMachineState.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'first_cpu' is more a QEMU accelerator-related concept
than a variable the machine requires to use.
Since the machine is aware of its CPUs, directly use the
first one to load the firmware.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Display the board revision in the machine description.
Before:
$ qemu-system-aarch64 -M help | fgrep raspi
raspi2 Raspberry Pi 2B
raspi3 Raspberry Pi 3B
After:
raspi2 Raspberry Pi 2B (revision 1.1)
raspi3 Raspberry Pi 3B (revision 1.2)
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 1c3db49d39 added the raspi3, which uses the same peripherals
than the raspi2 (but with different ARM cores). The raspi3 was
introduced without the ignore_memory_transaction_failures flag.
Almost 2 years later, the machine is usable running U-Boot and
Linux.
In commit 00cbd5bd74 we mapped a lot of unimplemented devices,
commit d442d95f added thermal block and commit 0e5bbd7406 the
system timer.
As we are happy with the raspi3, let's remove this flag on the
raspi2.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200921034729.432931-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The bcm2835-v3d is used since Linux 4.7, see commit
49ac67e0c39c ("ARM: bcm2835: Add VC4 to the device tree"),
and the bcm2835-txp since Linux 4.19, see commit
b7dd29b401f5 ("ARM: dts: bcm283x: Add Transposer block").
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200921034729.432931-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
M-profile CPUs only implement the ID registers as guest-visible if
the CPU implements the Main Extension (all our current CPUs except
the Cortex-M0 do).
Currently we handle this by having the Cortex-M0 leave the ID
register values in the ARMCPU struct as zero, but this conflicts with
our design decision to make QEMU behaviour be keyed off ID register
fields wherever possible.
Explicitly code the ID registers in the NVIC to return 0 if the Main
Extension is not implemented, so we can make the M0 model set the
ARMCPU struct fields to obtain the correct behaviour without those
values becoming guest-visible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-4-peter.maydell@linaro.org
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters
sub-struct. We're going to want id_pfr1 for an isar_features
check, and moving both at the same time avoids an odd
inconsistency.
Changes other than the ones to cpu.h and kvm64.c made
automatically with:
perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
The original CAN_PCI config option enables multiple SJA1000 PCI boards
emulation build. These boards bridge SJA1000 into I/O or memory
address space of the host CPU and depend on SJA1000 emulation.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <dd332de687bfe52bbec37f5de1d861fb8e620d74.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the model of complete open-source/design/hardware
CAN FD controller. The IP core project has been started and is maintained
by Ondrej Ille at Czech Technical University in Prague.
CTU CAN FD project pages:
https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
CAN bus CTU FEE Projects Listing page:
http://canbus.pages.fel.cvut.cz/
The core is mapped to PCIe card same as on one of its real hardware
adaptations. The device implementing two CTU CAN FD ip cores
is instantiated after CAN bus definition
-object can-bus,id=canbus0-bus
by QEMU parameters
-device ctucan_pci,canbus0=canbus0-bus,canbus1=canbus0-bus
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <23e3ca4dcb2cc9900991016910a6cab7686c0e31.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Definitions of registers and CAN FD frame message box of CTU CAN FD
IP core are generated the specification in CACTUS/IP-XACT format.
CTU CAN FD IP core repository
https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
The location of the CTU CAN IP core specification within
IP core design
spec/CTU/ip/CAN_FD_IP_Core/2.1/CAN_FD_IP_Core.2.1.xml
The header files are generated by pyXact_generator designed
by Ondrej Ille which is based on ipyxact_parser.
The specification is source of header files for driver and emulation,
documentation and VHDL registers map implementation.
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <97ae620f724bf1d76f127aaf628f7aec3af0a11c.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's kvmclock device is only created when KVM PV feature bits for
kvmclock (KVM_FEATURE_CLOCKSOURCE/KVM_FEATURE_CLOCKSOURCE2) are
exposed to the guest. With 'kvm=off' cpu flag the device is not
created and we don't call KVM_GET_CLOCK/KVM_SET_CLOCK upon migration.
It was reported that without these call at least Hyper-V TSC page
clocksouce (which can be enabled independently) gets broken after
migration.
Switch to creating kvmclock QEMU device unconditionally, it seems
to always make sense to call KVM_GET_CLOCK/KVM_SET_CLOCK on migration.
Use KVM_CAP_ADJUST_CLOCK check instead of CPUID feature bits.
Reported-by: Antoine Damhet <antoine.damhet@blade-group.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200922151934.899555-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_hvm_init() is restricted to the X86 architecture.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_hvm_init() is only meanful to initialize a X86/PC machine,
rename it as xen_hvm_init_pc().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xen accelerator requires specific changes to a machine to be able
to use it. See for example the 'Xen PC' machine configure its PCI
bus calling pc_xen_hvm_init_pci(). There is no 'Xen Q35' machine
declared. This code was probably added while introducing the Q35
machine, based on the existing PC machine (see commit df2d8b3ed4
"Introduce q35 pc based chipset emulator"). Remove the unreachable
code to simplify this file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200722082517.18708-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently in 'megasas_map_sgl' when 'iov_count=0' will just return
success however the 'cmd' doens't contain any iov. This will cause
the assert in 'scsi_dma_complete' failed. This is because in
'dma_blk_cb' the 'dbs->sg_cur_index == dbs->sg->nsg' will be true
and just call 'dma_complete'. However now there is no aiocb returned.
This fixes the LP#1878263:
-->https://bugs.launchpad.net/qemu/+bug/1878263
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200815141940.44025-3-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The caller of 'megasas_map_sgl' will only check if the return
is zero or not. If it return 0 it means success, as in the next
patch we will consider 'iov_count=0' is an error, so let's
return -1 to indicate a failure.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200815141940.44025-2-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several important steps during device scan depend on SCSI type of the
device. For example, max_transfer property is only determined and
assigned if the device has the type of TYPE_DISK.
Host-managed ZBC disks retain most of the properties of regular SCSI
drives, but they have their own SCSI device type, 0x14. This prevents
the proper assignment of max_transfer property for HM-zoned devices in
scsi-generic driver leading to I/O errors if the maximum i/o size
calculated at the guest exceeds the host value.
To fix this, define TYPE_ZBC to have the standard value from SCSI ZBC
standard spec. Several scan steps that were previously done only for
TYPE_DISK devices, are now performed for the SCSI devices having
TYPE_ZBC too.
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200811225122.17342-3-dmitry.fomichev@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of overwritting the properties of the generic 'state'
object, alias them.
Note we can now propagate the "baudbase" property.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907015535.827885-7-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the "wakeup" property introduced in commit 9826fd597d
("suspend: make serial ports wakeup the guest") a boolean.
As we want to reuse the generic serial properties in the
ISA model (next commit), expose this property.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907015535.827885-6-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The serial_mm_read/write() handlers from the TYPE_SERIAL_MM device
call the serial_ioport_read/write() handlers with shifted offset.
When looking at the trace events from this MMIO device, it is
confusing to read the accesses as I/O. Simplify using generic
trace event names which make sense the various uses.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907015535.827885-5-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All useful DPRINTF() calls have been converted to trace
events. Remove a pointless one in the IOEventHandler,
and drop the DEBUG_SERIAL ifdef'ry.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200907015535.827885-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the old debug PRINTF() call to display the UART
baudrate to a trace event.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200907015535.827885-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The serial device has 8 registers, each 8-bit. The MemoryRegionOps
'serial_io_ops' is initialized with max_access_size=1, and all
memory_region_init_io() callers correctly set the region size to
8 bytes:
- serial_io_realize
- serial_isa_realizefn
- serial_pci_realize
- multi_serial_pci_realize
It is safe to assert the offset argument of serial_ioport_read()
and serial_ioport_write() is always less than 8.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907015535.827885-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, and it is
not used anymore. Remove it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907011538.818996-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'mipssim' is not a real hardware, it is a simulator.
There is an ISA MMIO space mapped at 0x1fd00000, however
this is not a real ISA bus (no ISA IRQ). So can not use
the TYPE_ISA_SERIAL device...
Instead we have been using a plain MMIO device, but named
it IO.
TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, using
regshift=0 and endianness=DEVICE_LITTLE_ENDIAN.
Directly use the TYPE_SERIAL_MM device, enforcing the
regshift/endianness values. 'regshift' default is already
'0'. 'endianness' is meaningless for 8-bit accesses.
This change breaks migration back compatibility, but
this is not an issue for the mipssim machine.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907011538.818996-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
current code permits only nodeids in [0..MAX_NODES) range
due to nodeid check in
parse_numa_node()
if (nodenr >= MAX_NODES) {
error_setg(errp, "Max number of NUMA nodes reached: %"
so subj fixup is not reachable, drop it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-4-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it was deprecated since 4.1
commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes)
Users of existing VMs, wishing to preserve the same RAM distribution,
should configure it explicitly using ``-numa node,memdev`` options.
Current RAM distribution can be retrieved using HMP command
`info numa` and if separate memory devices (pc|nv-dimm) are present
use `info memory-device` and subtract device memory from output of
`info numa`.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200715084326.678715-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Qemu will send GET_INFLIGHT_FD and SET_INFLIGH_FD to backend, and
the backend setup the inflight memory to track the io.
Change-Id: I805d6189996f7a1b44c65f0b12ef7473b1789510
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20200909122021.1055174-1-fengli@smartx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place the 64bit window at the top of the physical address space, assign
25% of the avaiable address space. Force cpu.host-phys-bits=on for
microvm machine typs so this actually works reliable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-7-kraxel@redhat.com
Uses the existing gpex device which is also used as pcie host bridge on
arm/aarch64. For now only a 32bit mmio window and no ioport support.
It is disabled by default, use "-machine microvm,pcie=on" to enable.
ACPI support must be enabled too because the bus is declared in the
DSDT table.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-6-kraxel@redhat.com
Fill gpex config struct from memory map, then call the new
acpi_dsdt_add_gpex helper function. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-4-kraxel@redhat.com
Add helper function to generate dsdt aml code for the gpex pci host.
Largely copied from arm/virt. Configuration is handled by passing
a config struct instead of looked up from memory map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-3-kraxel@redhat.com
It is defined twice already. Move to a common header file to
remove duplication and make it available to everybody.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-2-kraxel@redhat.com
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Extracting the PCI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-9-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the memory commands to machine.json pulls less
QAPI-generated code into user-mode.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-7-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the query-vm-generation-id command to machine.json pulls
less QAPI-generated code into user-mode.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-5-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Restricting LostTickPolicy to machine.json pulls slightly less
QAPI-generated code into user-mode.
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-2-philmd@redhat.com>
[Add rationale to commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl9y3aEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpIgIH/2jGMi7hJ4CEs36pNdxaTfaTsX9IzlTv3/jb
ZuC3VV1PAdXyg0Z29QG0dzCkngN+D5ikC2KrBwUibKqBq6PqYie0dZYUYM5aEr/D
0v+afBBJkLtyOonLe3cG36D3cy7BeGpzXnNhm5muSl0+zaRutreWULMlF6sTmtMh
Vc/bp06IWdgj5eCp8cNzHItuzHtzXIrLsNuO2UDFPg/LFPl0gEcqXFDCB/9N6AfV
4D4XIXtWRd3umzQci0JNQUDDq5NTWnWaZDrK+6jeAhMfYFCYMxZqyT2AsEn636wm
H7klBm2Zs6gcLUX6on4RtALKyWAxRMWQenaJ4tjIB9QO2+7LsaE=
=3BXA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,acpi: fixes, tests
Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Sep 2020 08:09:21 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (48 commits)
libvhost-user: return on error in vu_log_queue_fill()
libvhost-user: return early on virtqueue errors
hw: virtio-pmem: detach the element fromt the virtqueue when error occurs
tests/acpi: update golden master DSDT binary table blobs for q35
piix4: don't reserve hw resources when hotplug is off globally
Add ACPI DSDT tables for q35 that are being updated by the next patch
tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
tests/acpi: list added acpi table binary file for pci bridge hotplug test
i440fx/acpi: do not add hotplug related amls for cold plugged bridges
Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
tests/acpi: add a new ACPI table in order to test root pci hotplug on/off
tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
vhost-user: save features of multiqueues if chardev is closed
qemu-options: document SMBIOS type 11 settings
hw/smbios: report error if table size is too large
hw/smbios: support loading OEM strings values from a file
tests: acpi: update acpi blobs with new AML
x68: acpi: trigger SMI before sending hotplug Notify event to OSPM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allows to switch the (vga mode) framebuffer into bigendian mode
by setting the property, simliar to stdvga.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-2-kraxel@redhat.com
Replace dpi with width_mm/height_mm in qemu_edid_info.
Use it when set (non-zero) to compute the DPI and generate the EDID.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Divide the resolution by the DPI, and multiply to mm.
Note the computation done for edid[21/22] is correct (in cm).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When resetting virtio-gpu, virgl_renderer_reset() should be
called to ensure that the virglrenderer status is correct.
Signed-off-by: Guoqing Zhang <zhangguoqing.kernel@bytedance.com>
Reviewed-by: Qi Liu<liuqi.16@bytedance.com>
Message-id: 20200918111632.37354-1-zhangguoqing.kernel@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200813165125.59928-1-liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5f503cd9f3 ("virtio-pmem: add virtio device")
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.
In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.
As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:
tests/data/acpi/q35/DSDT
tests/data/acpi/q35/DSDT.acpihmat
tests/data/acpi/q35/DSDT.bridge
tests/data/acpi/q35/DSDT.cphp
tests/data/acpi/q35/DSDT.dimmpxm
tests/data/acpi/q35/DSDT.ipmibt
tests/data/acpi/q35/DSDT.memhp
tests/data/acpi/q35/DSDT.mmio64
tests/data/acpi/q35/DSDT.numamem
tests/data/acpi/q35/DSDT.tis
These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-11-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.
In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.
As a result of the patch, the following are the changes to the DSDT ACPI
table:
@@ -858,38 +858,33 @@
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
- Name (_SUN, 0x03) // _SUN: Slot User Number
Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1148,37 +1143,32 @@
PCEJ (BSEL, _SUN)
}
}
Device (SF8)
{
Name (_SUN, 0x1F) // _SUN: Slot User Number
Name (_ADR, 0x001F0000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Method (DVNT, 2, NotSerialized)
{
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
If ((Arg0 & 0x10))
{
Notify (S20, Arg1)
}
If ((Arg0 & 0x20))
{
Notify (S28, Arg1)
}
If ((Arg0 & 0x40))
{
Notify (S30, Arg1)
}
If ((Arg0 & 0x80))
While at it, I have also updated a stale comment.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Suggested-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus").
As a result, when acpi_pcihp_find_hotplug_bus() is called
with bsel set to 0, it may return the root bus. This can cause devices
attached to the root bus to get hot-unplugged if the user issues the following
set of commmands:
outl 0xae10 0
outl 0xae08 your_slot
Thanks to Julia for pointing this out here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html
In this patch, we fix the issue in this function by checking if the bus which
is returned by the function is actually hotpluggable. If not, we simply return
NULL. This avoids the scenario where we were returning a non-hotpluggable bus.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The SMBIOS 2.1 entry point uses a uint16 data type for reporting the
total length of the tables. If the user passes -smbios configuration to
QEMU that causes the table size to exceed this limit then various bad
behaviours result, including
- firmware hangs in an infinite loop
- firmware triggers a KVM crash on bad memory access
- firmware silently discards user's SMBIOS data replacing it with
a generic data set.
Limiting the size to 0xffff in QEMU avoids triggering most of these
problems. There is a remaining bug in SeaBIOS which tries to prepend its
own data for table 0, and does not check whether there is sufficient
space before attempting this.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-3-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.
This introduces the "path" parameter allowing for:
$ echo -n "thisthing" > mydata.txt
$ qemu-system-x86_64 \
-smbios type=11,value=something \
-smbios type=11,path=mydata.txt \
-smbios type=11,value=somemore \
...other args...
Now in the guest
$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: something
String 2: thisthing
String 3: somemore
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-2-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case firmware has negotiated CPU hotplug SMI feature, generate
AML to describe SMI IO port region and send SMI to firmware
on each CPU hotplug SCI in case new CPUs were hotplugged.
Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running
we can't send SMI before new CPUs are fetched from QEMU as it
could cause sending Notify to a CPU that firmware hasn't seen yet.
So fetch new CPUs into local cache first, then send SMI and
after that send Notify events to cached CPUs. This should ensure
that Notify is sent only to CPUs which were processed by firmware
first.
Any CPUs that were hotplugged after caching will be processed
by the next CPU_SCAN_METHOD, when pending SCI is handled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When CPU hotplug with SMI has been negotiated, describe the SMI
register block in the DSDT. Pass the ACPI name of the SMI control
register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the
register in the next patch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Translate the "CPU hotplug with SMI" feature bit, from the property
added in the last patch, to a dedicated boolean in AcpiPmInfo.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose the "smi_negotiated_features" field of ICH9LPCState as
a QOM property.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPU hot-unplug with SMM requires firmware participation to prevent
guest crash (i.e. CPU can be removed only after OS _and_ firmware
were prepared for the action).
Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT
feature bit, which is advertised by firmware when it has support
for CPU hot-unplug. Use it to check if guest is able to handle
unplug and make device_del fail gracefully if hot-unplug feature
hasn't been negotiated.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There were reports of guest crash on CPU hotplug, when using q35 machine
type and OVMF with SMM, due to hotplugged CPU trying to process SMI at
default SMI handler location without it being relocated by firmware first.
Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with
SMI support while SMI broadcast is in use.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-3-imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will allow firmware to notify QEMU that firmware requires SMI
being triggered on CPU hot[un]plug, so that it would be able to account
for hotplugged CPU and relocate it to new SMM base and/or safely remove
CPU on unplug.
Using negotiated features, follow up patches will insert SMI upcall
into AML code, to make sure that firmware processes hotplug before
guest OS would attempt to use new CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current the 'virtio_set_features' only update the 'MemorRegionCaches'
when the 'virtio_set_features_nocheck' return '0' which means it is
not bad features. However the guest can still trigger the access of the
used vring after set bad features. In this situation it will cause assert
failure in 'ADDRESS_SPACE_ST_CACHED'.
Buglink: https://bugs.launchpad.net/qemu/+bug/1890333
Fixes: db812c4073 ("virtio: update MemoryRegionCaches when guest negotiates features")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200919082706.6703-1-liq3ea@163.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 as done for vhost-vsock-pci.
To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).
Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-5-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-user-vsock-pci device:
$ ./qemu-system-x86_64 ... \
-chardev socket,id=char0,reconnect=0,path=/tmp/vhost4.socket \
-device vhost-user-vsock-pci,chardev=char0
qemu-system-x86_64: -device vhost-user-vsock-pci,chardev=char0:
device is modern-only, use disable-legacy=on
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 and removes the 'transitional_name'
property, as done for vhost-vsock-pci, removing the need to specify
'disable-legacy=on' on vhost-user-vsock-pci device.
Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-4-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-vsock-pci device:
$ ./qemu-system-x86_64 ... -device vhost-vsock-pci,guest-cid=5
qemu-system-x86_64: -device vhost-vsock-pci,guest-cid=5:
device is modern-only, use disable-legacy=on
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
In addition Cornelia verified that forcing a legacy mode on
vhost-vsock-pci device using x86-64 host and s390x guest, so with
different endianness, produces strange behaviours.
This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
vhost-vsock-pci device.
To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).
As the transitional device name is not commonly used, we do not
provide compatibility handling for it.
Cc: qemu-stable@nongnu.org
Reported-by: Qian Cai <caiqian@redhat.com>
Reported-by: Qinghua Cheng <qcheng@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1868449
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally
on") added a check that returns an error if legacy support is on, but the
device does not support legacy.
Unfortunately some devices were wrongly declared legacy capable even if
they were not (e.g vhost-vsock).
To avoid migration issues, we add a virtio-device property
(x-disable-legacy-check) to skip the legacy error, printing a warning
instead, for machine types < 5.1.
Cc: qemu-stable@nongnu.org
Fixes: 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on")
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add trace functions in vhost-vdpa.c.
All traces from this file can be enabled with '-trace vhost_vdpa*'.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-3-lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu fails with below error when trying to run with virtio pmem:
(qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1:
device is modern-only, use disable-legacy=on
This patch fixes this by forcing virtio 1 with virtio-pmem.
fixes: adf0748a49 ("virtio-pci: Proxy for virtio-pmem")
Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Message-Id: <20200925102251.7216-1-pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on virtio-iommu-pci:
qemu-system-aarch64: -device virtio-iommu-pci: device is modern-only,
use disable-legacy=on
virtio-iommu was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
virtio-iommu-pci device.
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If realize fails, domains and endpoints trees may be NULL. On
unrealize(), this produces assertions:
"GLib: g_tree_destroy: assertion 'tree != NULL' failed"
Check that the trees are non NULL before destroying them.
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vhost-user-blk daemon provides only one virtqueue, but device was
added with several queues, then QEMU will send more VHOST-USER command
than expected by daemon side. The vhost_virtqueue_start() routine
handles such case by checking the return value from the
virtio_queue_get_desc_addr() function call. Add the same check to the
vhost_dev_set_log() routine.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user devices can get a disconnect in the middle of the VHOST-USER
handshake on the migration start. If disconnect event happened right
before sending next VHOST-USER command, then the vhost_dev_set_log()
call in the vhost_migration_log() function will return error. This error
will lead to the assert() and close the QEMU migration source process.
For the vhost-user devices the disconnect event should not break the
migration process, because:
- the device will be in the stopped state, so it will not be changed
during migration
- if reconnect will be made the migration log will be reinitialized as
part of reconnect/init process:
#0 vhost_log_global_start (listener=0x563989cf7be0)
at hw/virtio/vhost.c:920
#1 0x000056398603d8bc in listener_add_address_space (listener=0x563989cf7be0,
as=0x563986ea4340 <address_space_memory>)
at softmmu/memory.c:2664
#2 0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0,
as=0x563986ea4340 <address_space_memory>)
at softmmu/memory.c:2740
#3 0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8,
opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER,
busyloop_timeout=0)
at hw/virtio/vhost.c:1385
#4 0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990)
at hw/block/vhost-user-blk.c:315
#5 0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990,
event=CHR_EVENT_OPENED)
at hw/block/vhost-user-blk.c:379
Update the vhost-user-blk device with the internal started_vu field which
will be used for initialization (vhost_user_blk_start) and clean up
(vhost_user_blk_stop). This additional flag in the VhostUserBlk structure
will be used to track whether the device really needs to be stopped and
cleaned up on a vhost-user level.
The disconnect event will set the overall VHOST device (not vhost-user) to
the stopped state, so it can be used by the general vhost_migration_log
routine.
Such approach could be propogated to the other vhost-user devices, but
better idea is just to make the same connect/disconnect code for all the
vhost-user devices.
This migration issue was slightly discussed earlier:
- https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html
- https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <9fbfba06791a87813fcee3e2315f0b904cc6789a.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.
Cc: qemu-stable@nongnu.org # v5.1
Fixes: 195784a0cf (numa: Auto-enable NUMA when any memory devices are possible)
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200820094828.30348-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200816142245.17556-1-liq3ea@163.com>
Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To speed up the memory mapping updating between vhost-vDPA and vDPA
device driver, this patch passes the IOTLB batching flags via IOTLB
API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint
that a bathced IOTLB updating may be initiated from the
userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished
the updating:
VHOST_IOTLB_BATCH_BEGIN
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE
...
VHOST_IOTLB_BATCH_END
Vhost-vDPA can then know that all mappings has been set and can do
optimization like passing all the mappings to the vDPA device driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tries to switch to use new kernel IOTLB format V2. Previous
version may have inconsistent ABI between 32bit and 64bit machines
because of the hole after type field. Refer kernel commit
("429711aec282 vhost: switch to use new message format") for more
information.
To enable this feature, qemu need to use a new ioctl
VHOST_SET_BACKEND_FEATURE with VHOST_BACKEND_F_IOTLB_MSG_V2 bit. A new
vhost setting backend features ops was introduced. And when we try to
set features for vhost dev, we will examine the support of new IOTLB
format and enable it. This process is total transparent to guest,
which means we can have different IOTLB message type in src and dst
during migration.
The conversion of IOTLB message is straightforward, just check the
type and behave accordingly.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
and one for removing unused address variables from load_elf.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9wl2IACgkQIeENKd+X
cFSN7gf8CtertCR9QCXELwY/4qOZq5/yLBX1cQkNYMGrkZ9n3hpGUifHBnmKvNkH
VvhhuJAX0BnSftSaSSlWezFdwn/hwTRiVYaLnTC/sLrv3hBgoAqykKIDS1ncAgGx
U7VwZH0oQVhQjBzMeYYMOhIwyOFeY1+5Odhs1uuyzHZ7qBGbtm+1EDrG4hXHJNBj
oQnqtr093SzpR20uPQo1Dm1+6aF9Iw/9Kb8jBAChduTF0uEVvbl/WEtUB/7r+Dme
ishAtZi4OxVJCZhDLlIAUM/4lsLv32OPcD5JjKlZpPBnziZg1jubI1nhVGnWY1g+
m+b9MjNrZ7u1jgegLng3c+SvAxAd2Q==
=Ma9R
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-register-20200927' into staging
Two small patches. One with a fix for the register API instance_size
and one for removing unused address variables from load_elf.
# gpg: Signature made Sun 27 Sep 2020 14:45:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-register-20200927:
core/register: Specify instance_size in the TypeInfo
load_elf: Remove unused address variables from callers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use XHCI as sysbus device, add memory region property to get the
address space instance for dma read/write.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-5-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch sets the base to use xhci as sysbus model, for which pci
specific hooks are moved to hcd-xhci-pci.c. As a part of this requirment
msi/msix interrupts handling is moved under XHCIPCIState. Made required
changes for qemu-xhci-nec.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
