memory_region_present() leaks a reference to a MemoryRegion in the
case "mr == container". While fixing it, avoid reference counting
altogether for memory_region_present(), by using RCU only.
The return value could in principle be already invalid immediately
after memory_region_present returns, but presumably the caller knows
that and it's using memory_region_present to probe for devices that
are unpluggable, or something like that. The RCU critical section
is needed anyway, because it protects as->current_map.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The error checks I added used 'break' after the error, but I'm
in a switch inside the while loop, so they need to be 'goto out'.
Spotted by coverity; entries 1311368 and 1311369
Fixes: afcddefd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1436555332-19076-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case we're running on a 64-bit host, be sure to sign extend the
general purpose registers and hi/lo/pc before writing them to KVM, so as
to take advantage of MIPS32/MIPS64 compatibility.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: kvm@vger.kernel.org
Cc: qemu-stable@nongnu.org
Message-Id: <1429871214-23514-3-git-send-email-james.hogan@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix access to 32-bit registers on big endian targets. The pointer passed
to the kernel must be for the actual 32-bit value, not a temporary
64-bit value, otherwise on big endian systems the kernel will only
interpret the upper half.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: kvm@vger.kernel.org
Cc: qemu-stable@nongnu.org
Message-Id: <1429871214-23514-2-git-send-email-james.hogan@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two bug fixes:
* Memory leak due to extra g_strdup() when registering X86CPU alias properties
* Fix CPUID levels so that W10 insider can run as guest OS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=x5/Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2015-07-15
Two bug fixes:
* Memory leak due to extra g_strdup() when registering X86CPU alias properties
* Fix CPUID levels so that W10 insider can run as guest OS
# gpg: Signature made Wed Jul 15 21:26:59 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
target-i386: emulate CPUID level of real hardware
target-i386: Don't strdup() alias property name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=LY8R
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging
NUMA queue, 2015-07-15
# gpg: Signature made Wed Jul 15 21:01:37 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/numa-pull-request:
numa: Fix memory leak in numa_set_mem_node_id()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
W10 insider has a bug where it ignores CPUID level and interprets
CPUID.(EAX=07H, ECX=0H) incorrectly, because CPUID in fact returned
CPUID.(EAX=04H, ECX=0H); this resulted in execution of unsupported
instructions.
While it's a Windows bug, there is no reason to emulate incorrect level.
I used http://instlatx64.atw.hu/ as a source of CPUID and checked that
it matches Penryn Xeon X5472, Westmere Xeon W3520, SandyBridge i5-2540M,
and Haswell i5-4670T.
kvm64 and qemu64 were bumped to 0xD to allow all available features for
them (and to avoid the same Windows bug).
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now object_property_add_alias() calls g_strdup() on the target property
name, so we don't need to call g_strdup() ourselves.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The Linux kernel on aarch64 creates a page table entry at early bootup
that spans the 2MB range on memory spanning the fdt start address:
[ ALIGN_DOWN(fdt, 2MB) ... ALIGN_DOWN(fdt, 2MB) + 2MB ]
This means that when our current 4k alignment happens to fall at the end
of the aligned region, Linux tries to access memory that is not mapped.
The easy fix is to instead increase the alignment to 2MB, making Linux's
logic always succeed.
We leave the existing 4k alignment for 32bit kernels to not cause any
regressions due to space constraints.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SCTLR_EL3 cpreg definition was implicitly resetting the
register state to 0, which is both wrong and clashes with
the reset done via the SCTLR definition (since sctlr[3]
is unioned with sctlr_s). This went unnoticed until recently,
when an unrelated change (commit a903c449b4) happened to
perturb the order of enumeration through the cpregs hashtable for
reset such that the erroneous reset happened after the correct one
rather than before it. Fix this by marking SCTLR_EL3 as an alias,
so its reset is left up to the AArch32 view.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Version: GnuPG v1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=CaLG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cody/tags/jtc-for-upstream-pull-request' into staging
# gpg: Signature made Wed Jul 15 03:25:16 2015 BST using RSA key ID C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* remotes/cody/tags/jtc-for-upstream-pull-request:
block/curl: Don't lose original error when a connection fails.
mirror: correct buf_size
block: keep bitmap if incremental backup job is cancelled
blockdev: no need to drain in qmp_block_commit
block/mirror: Sleep periodically during bitmap scanning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a LWL, LWR, LDL or LDR instruction triggers a page fault, QEMU
currently reports the aligned address in CP0 BadVAddr, while the Windows
NT kernel expects the unaligned address.
This patch adds a byte access with the unaligned address at the
beginning of the LWL/LWR/LDL/LDR instructions to possibly trigger a page
fault and fill the QEMU TLB.
Cc: Leon Alrae <leon.alrae@imgtec.com>
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
For the MIPS N64 ABI when QEMU reads the break/trap instruction so that
it can inspect the break/trap code it reads 8 rather than 4 bytes
which means it finds the code field from the instruction after the
break/trap instruction. This then causes the break/trap handling
code to fail because it does not understand the code number.
The fix forces QEMU to always read 4 bytes of instruction data rather
than deciding how much to read based on the ABI.
Signed-off-by: Andrew Bennett <andrew.bennett@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
UHI assert and link operations call lock_user_string() twice to obtain two
strings pointed by gpr[4] and gpr[5]. If the second lock_user_string()
fails, then the first one won't get freed. Fix this by introducing another
macro responsible for obtaining two strings and handling allocation
failure.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Make use of CMPOP in floating-point compare instructions.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Fix Debug Mode flag clearing, and when DERET is placed between LL and SC
do not make SC fail.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
When syncing the task ASID with EntryHi, correctly or the value instead
of assigning it.
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
In the Release 6 of the MIPS Architecture, LL, SC, LLD, SCD, PREF
and CACHE instructions have 9 bits offsets.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
MSACSR.Cause bits are needed to be cleared before a vector floating-point
instructions.
FEXDO.df, FEXUPL.df and FEXUPR.df were missed out.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Fix core configuration for MIPS64R6-generic to make it as close as
I6400.
I6400 core has 48-bit of Virtual Address available (SEGBITS).
MIPS SIMD Architecture is available.
Rearrange order of bits to match the specification.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g6Rf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20150715-1' into staging
migration/next for 20150715
# gpg: Signature made Wed Jul 15 11:23:33 2015 BST using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20150715-1:
migration: We also want to store the global state for savevm
migration: reduce the count of strlen call
migration: Register global state section before loadvm
migration: Write documetation for events capabilites
migration: Trace event and migration event are different things
migration: Only change state after migration has finished
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit df4b102452 introduced global_state
section. But it only filled the state while doing migration. While
doing a savevm, we stored an empty string as state. So when we did a
loadvm, it complained that state was invalid.
Fedora 21, 4.1.1, qemu 2.4.0-rc0
> ../../configure --target-list="x86_64-softmmu"
068 2s ... - output mismatch (see 068.out.bad)
--- /home/bos/jhuston/src/qemu/tests/qemu-iotests/068.out 2015-07-08
17:56:18.588164979 -0400
+++ 068.out.bad 2015-07-09 17:39:58.636651317 -0400
@@ -6,6 +6,8 @@
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm 0
(qemu) quit
+qemu-system-x86_64: Unknown savevm section or instance 'globalstate' 0
+qemu-system-x86_64: Error -22 while loading VM state
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
*** done
Failures: 068
Failed 1 of 1 tests
Actually, there were two problems here:
- we registered global_state too late for load_vm (fixed on another
patch on the list)
- we didn't store a valid state for savevm (fixed by this patch).
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
'strlen' is called three times in 'save_page_header', it's
inefficient.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We can want the trace event even without migration events enabled.
Reported-by: Wen Congyang <ghostwcy@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
On previous change, we changed state at post load time if it was not
running, special casing the "running" change. Now, we change any states
at the end of the migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently if qemu is connected to a curl source (eg. web server), and
the web server fails / times out / dies, you always see a bogus EIO
"Input/output error".
For example, choose a large file located on any local webserver which
you control:
$ qemu-img convert -p http://example.com/large.iso /tmp/test
Once it starts copying the file, stop the webserver and you will see
qemu-img fail with:
qemu-img: error while reading sector 61440: Input/output error
This patch does two things: Firstly print the actual error from curl
so it doesn't get lost. Secondly, change EIO to EPROTO. EPROTO is a
POSIX.1 compatible errno which more accurately reflects that there was
a protocol error, rather than some kind of hardware failure.
After this patch is applied, the error changes to:
$ qemu-img convert -p http://example.com/large.iso /tmp/test
qemu-img: curl: transfer closed with 469989 bytes remaining to read
qemu-img: error while reading sector 16384: Protocol error
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
If bus_size is less than 0, the command fails.
If buf_size is 0, use DEFAULT_MIRROR_BUF_SIZE.
If buf_size % granularity is not 0, mirror_free_init() will
do dangerous things.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 5555A588.3080907@cn.fujitsu.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reclaim the dirty bitmap if an incremental backup block job is
cancelled. The ret variable may be 0 when the job is cancelled so it's
not enough to check ret < 0.
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1434380534-7680-1-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Draining is not necessary, I/O can happen as soon as the
commit coroutine yields. Draining can be necessary before
reopening the file for read/write, or while modifying the
backing file chain, but that is done separately in
bdrv_reopen_multiple or bdrv_close; this particular
bdrv_drain_all does nothing for that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432822903-25821-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Before, we only yield after initializing dirty bitmap, where the QMP
command would return. That may take very long, and guest IO will be
blocked.
Add sleep points like the later mirror iterations.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1431486673-19280-1-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
commit 213941d73b ("virtio-ccw: migrate ->revision") broke
migration:
2015-07-07T11:22:55.570968Z qemu-system-s390x: VQ 39 address 0x0 inconsistent with Host index 0x100
2015-07-07T11:22:55.571008Z qemu-system-s390x: error while loading state for instance 0x0 of
If thinint support is active, the config_load function returns early.
Make sure to load the revision all the time.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 213941d73b ("virtio-ccw: migrate ->revision")
Message-Id: <1436269643-66303-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The diag288 watchdog is no sysbus device, therefore it doesn't get
triggered on resets automatically using dc->reset.
Let's register the reset handler manually, so we get correctly notified
again when a system reset was requested. Also reset the watchdog on
subsystem resets that don't trigger a full system reset.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Apply the ceph settings from a config file before any ceph settings
from the command line. Since the ceph config file location may be
specified on the command line, parse it once to read the config file,
and do a second pass to apply the rest of the command line ceph
options.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To be safe, when cache=none is used ceph settings should not be able
to override it to turn on caching. This was previously possible with
rbd_cache=true in the rbd device configuration or a ceph configuration
file. Similarly, rbd settings could have turned off caching when qemu
requested it, although this would just be a performance problem.
Fix this by changing rbd's cache setting to match qemu after all other
ceph settings have been applied.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The old one still works for now, but will not work indefinitely.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RBDAIOCB.status was only used for cancel, which was removed in
7691e24dbe.
RBDAIOCB.sector_num was never used.
RADOSCB.done and rcbid were never used.
RBD_FD* are obsolete since the pipe was removed in
e04fb07fd1.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch moves bdrv_attach_child() from the individual places that add
a backing file to a BDS to bdrv_set_backing_hd(), which is called by all
of them. It also adds bdrv_detach_child() there.
For normal operation (starting with one backing file chain and not
changing it until the topmost image is closed) and live snapshots, this
constitutes no change in behaviour.
For all other cases, this is a fix for the bug that the old backing file
was still referenced as a child, and the new one wasn't referenced.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Block drivers may still want to access their child nodes in their
.bdrv_close handler. If they unref and/or detach a child by themselves,
this should not result in a double free.
There is additional code for backing files, which are just a special
case of child nodes. The same applies for them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is the counterpart for bdrv_open_child(). It decreases the
reference count of the child BDS and removes it from the list of
children of the given parent BDS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
It is the same as bdrv_open_image(), except that it doesn't only return
success or failure, but the newly created BdrvChild object for the new
child node.
As the BdrvChild object already contains a BlockDriverState pointer (and
this is supposed to become the only pointer so that bdrv_append() and
friends can just change a single pointer in BdrvChild), the pbs
parameter is removed for bdrv_open_child().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Let the callers of bdrv_open_inherit() call bdrv_attach_child(). It
needs to be called in all cases where bdrv_open_inherit() succeeds (i.e.
returns 0) and a child_role is given.
bdrv_attach_child() is moved upwards to avoid a forward declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>