Hi
On this PULL:
- use xxHash for calculate dirty_rate (andrei)
- Create qemu_target_pages_to_MiB() and use them (quintela)
- make dirtyrate target independent (quintela)
- Merge 5 patches from atomic counters series (quintela)
Please apply.
-----BEGIN PGP SIGNATURE-----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=8gfA
-----END PGP SIGNATURE-----
Merge tag 'migration-20230515-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request 20230515
Hi
On this PULL:
- use xxHash for calculate dirty_rate (andrei)
- Create qemu_target_pages_to_MiB() and use them (quintela)
- make dirtyrate target independent (quintela)
- Merge 5 patches from atomic counters series (quintela)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRiJoUACgkQ9IfvGFhy
# 1yO1ExAAsSStVAUh/tSgu5fhXydJVkBMO6LOj1k+tA7qylwv4QsqZ/pLNBvY8Zms
# 8/bpYtlvw1LwCSaq01oNA6RhBhkBaZ5x0PUViCY87dsJhu0hEo68Jcp0FkrkW93E
# OiIsp9NU7wpnqd88ZhzjcZ/viWebPw3660V5KY4/8ZZFVxJaKMhG+vW3pGYH8yDR
# TmZK5E5e3t5yiwDRRPrkAw3+e+GDwfwNuOBkk+NBJdL1mOZnIfVwFwxRAXWn/vEM
# f6NdT3aXplsNeKPCN1w9zrLhOJdHeu8IlhWhT/cjTgOKemBJBYzftH6dI/X9D0ix
# ghWAzFSJh1S38gw0mMef1VERJqh7JpAkTq7vT2x7J/0UIbIAru0yRiSrHbNBCcvL
# efsVFtjyseKq70qKN515uoqbK6mlnxP+eECIAUmesUx0bJI9jDWzn+KVc86xUvWy
# +98KDcPuYVxdVp4XHAIsyHYOfTY/tJwG5KI4hYgGP7uxFVr/qus3eBB/Q5BBVPOx
# X0A/760iehfV0V0UmVEt8mC7uDjI0JBouenUHcURAtbsnuGRMCz6s1kLsZYaHuGV
# NhihXq6jnwcvn2nGGnXY44TsgBWesfUrCFZOjJzbaSjGH5UpipC0SECKqh1GKoQP
# kdknvyej5h8egU2QFdS8sCUeXIfwAtHfCamtnui3b3E3iF3TSco=
# =8gfA
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 05:33:09 AM PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230515-pull-request' of https://gitlab.com/juan.quintela/qemu:
qemu-file: Remove total from qemu_file_total_transferred_*()
qemu-file: Make rate_limit_used an uint64_t
qemu-file: make qemu_file_[sg]et_rate_limit() use an uint64_t
migration: We set the rate_limit by a second
migration: A rate limit value of 0 is valid
migration: Make dirtyrate.c target independent
migration: Teach dirtyrate about qemu_target_page_bits()
migration: Teach dirtyrate about qemu_target_page_size()
Use new created qemu_target_pages_to_MiB()
softmmu: Create qemu_target_pages_to_MiB()
migration/calc-dirty-rate: replaced CRC32 with xxHash
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZGIThgAKCRBAov/yOSY+
34NVA/0b99XxYeeOnJYspjKGgVk+R51+1ilMHqPGlNEG6HB2eHyIJdDgenBDaa/h
lxqzDU9YQI4DzuvUcC75uWrShMkR5/Fb8Z0CCEToQUyAwfh2pNeAIzuB7TXHW5Ox
SRGMs3eF23q5BUSCeD7DS2Ar1Zv4Gm3ytutiMAvCxNzxJWF1aA==
=g93p
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20230515' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20230515
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZGIThgAKCRBAov/yOSY+
# 34NVA/0b99XxYeeOnJYspjKGgVk+R51+1ilMHqPGlNEG6HB2eHyIJdDgenBDaa/h
# lxqzDU9YQI4DzuvUcC75uWrShMkR5/Fb8Z0CCEToQUyAwfh2pNeAIzuB7TXHW5Ox
# SRGMs3eF23q5BUSCeD7DS2Ar1Zv4Gm3ytutiMAvCxNzxJWF1aA==
# =g93p
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 04:12:06 AM PDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230515' of https://gitlab.com/gaosong/qemu:
hw/intc: Add NULL pointer check on LoongArch ipi device
hw/loongarch/virt: Set max 256 cpus support on loongarch virt machine
hw/loongarch/virt: Modify ipi as percpu device
tests/avocado: Add LoongArch machine start test
loongarch: mark loongarch_ipi_iocsr re-entrnacy safe
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Function is already quite long.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-7-quintela@redhat.com>
Change all the functions that use it. It was already passed as
uint64_t.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-6-quintela@redhat.com>
It is really size_t. Everything else uses uint64_t, so move this to
uint64_t as well. A size can't be negative anyways.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-5-quintela@redhat.com>
That the implementation does the check every 100 milliseconds is an
implementation detail that shouldn't be seen on the interfaz.
Notice that all callers of qemu_file_set_rate_limit() used the
division or pass 0, so this change is a NOP.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-4-quintela@redhat.com>
And it is the best way to not have rate_limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-2-quintela@redhat.com>
When ipi mailbox is used, cpu_index is decoded from iocsr register.
cpu maybe does not exist. This patch adds NULL pointer check on
ipi device.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-4-gaosong@loongson.cn>
Add separate macro EXTIOI_CPUS for extioi interrupt controller, extioi
only supports 4 cpu. And set macro LOONGARCH_MAX_CPUS as 256 so that
loongarch virt machine supports more cpus.
Interrupts from external devices can only be routed cpu 0-3 because
of extioi limits, cpu internal interrupt such as timer/ipi can be
triggered on all cpus.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-3-gaosong@loongson.cn>
ipi is used to communicate between cpus, this patch modified
loongarch ipi device as percpu device, so that there are
2 MemoryRegions with ipi device, rather than 2*cpus
MemoryRegions, which may be large than QDEV_MAX_MMIO if
more cpus are added on loongarch virt machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-2-gaosong@loongson.cn>
Add a new test in tests/avocado to check LoongArch virt machine start.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230513012744.1885728-1-gaosong@loongson.cn>
loongarch_ipi_iocsr MRs rely on re-entrant IO through the ipi_send
function. As such, mark these MRs re-entrancy-safe.
Fixes: a2e1753b80 ("memory: prevent dma-reentracy issues")
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230506112145.3563708-1-alxndr@bu.edu>
Signed-off-by: Song Gao <gaosong@loongson.cn>
After the previous two patches, there is nothing else that is target
specific.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230511141208.17779-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230511141208.17779-5-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230511141208.17779-4-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230511141208.17779-3-quintela@redhat.com>
Function that convert a number of target_pages into its size in MiB.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230511141208.17779-2-quintela@redhat.com>
This significantly reduces overhead of dirty page
rate calculation in sampling mode.
Tested using 32GiB VM on E5-2690 CPU.
With CRC32:
total_pages=8388608 sampled_pages=16384 millis=71
With xxHash:
total_pages=8388608 sampled_pages=16384 millis=14
Signed-off-by: Andrei Gudkov <gudkov.andrei@huawei.com>
Message-Id: <cd115a89fc81d5f2eeb4ea7d57a98b84f794f340.1682598010.git.gudkov.andrei@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A few fixes and updates to bring OpenRISC inline with the latest
architecture spec updates:
- Allow FPCSR to be accessed in user mode
- Select tininess detection before rounding
- Fix FPE Exception PC value
-----BEGIN PGP SIGNATURE-----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=zqbX
-----END PGP SIGNATURE-----
Merge tag 'or1k-pull-request-20230513' of https://github.com/stffrdhrn/qemu into staging
OpenRISC FPU Updates for 8.1
A few fixes and updates to bring OpenRISC inline with the latest
architecture spec updates:
- Allow FPCSR to be accessed in user mode
- Select tininess detection before rounding
- Fix FPE Exception PC value
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmRfPIEACgkQw7McLV5m
# J+RFuhAAt4xxci52fxvPpgUu/mjKU6mbYNjBEPEh+OAcb+m/BrvKhazZDACkyLMe
# ehavWtI856jfy6DsIA5wj5+zhgV8W5DR6a1mHIhmSAoVq7e+NnC5y0GJC9B0Xd/2
# FNOq/LZPtv/w7u+D1pFJaTb07hAaFVIC05Arn4dXa1k3yBuyjqIJnlrXa3Jt0pLW
# To/z1zch1rUp6RhFmGxU+8/qvTbzqkm/F3kbe8l2z34371lTd6KhPwvKaImMpTYQ
# dvULTMXjZ6Dp8BmUrDcnLMTL3NbYcPrI+qOHX1X+dwzNFyui2I8Ci7IfEKJ460ja
# Fe2Ku/aDfHSZYYayWaYSlrrZ1AH0fLLwIkHSs95+xUMsl81mtS6lIysj7fAFRnM5
# 7tU4ov1T/leupvvUCUX5N4Yje/yvbuoAqGyhjDHzJ98vIe6fDhutU4Bm8/30q6Dy
# nKnfSgRHrrTrH042xW32DJnzaN2pEWrNtOMaegLMaqZ60app2YDaKJvtHLua1VjD
# b+g+X/+xBNb34k5e/f4z+GeGPoqE2wvwMcSkD+NBE8je3idPdMS/u5lQrvqvcbI/
# DJBRoPifNME/oYoTxPVKRnrCQIWQ6YkeLWVmqMfCVpjCF97gexo+UBUawJimTXFr
# gmcIYxv87oKF4KbCn7LsLlXGSpWSihKSBTHDxFPaKiRbnYZ5ais=
# =zqbX
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 May 2023 08:30:09 AM BST
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'or1k-pull-request-20230513' of https://github.com/stffrdhrn/qemu:
target/openrisc: Setup FPU for detecting tininess before rounding
target/openrisc: Set PC to cpu state on FPU exception
target/openrisc: Allow fpcsr access in user mode
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In check_s2_mmu_setup() we have a check that is attempting to
implement the part of AArch64.S2MinTxSZ that is specific to when EL1
is AArch32:
if !s1aarch64 then
// EL1 is AArch32
min_txsz = Min(min_txsz, 24);
Unfortunately we got this wrong in two ways:
(1) The minimum txsz corresponds to a maximum inputsize, but we got
the sense of the comparison wrong and were faulting for all
inputsizes less than 40 bits
(2) We try to implement this as an extra check that happens after
we've done the same txsz checks we would do for an AArch64 EL1, but
in fact the pseudocode is *loosening* the requirements, so that txsz
values that would fault for an AArch64 EL1 do not fault for AArch32
EL1, because it does Min(old_min, 24), not Max(old_min, 24).
You can see this also in the text of the Arm ARM in table D8-8, which
shows that where the implemented PA size is less than 40 bits an
AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit
IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to
constrain the IPA to the implemented PA size.
Because of part (2), we can't do this as a separate check, but
have to integrate it into aa64_va_parameters(). Add a new argument
to that function to indicate that EL1 is 32-bit. All the existing
callsites except the one in get_phys_addr_lpae() can pass 'false',
because they are either doing a lookup for a stage 1 regime or
else they don't care about the tsz/tsz_oob fields.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230509092059.3176487-1-peter.maydell@linaro.org
On a build configured with: --disable-tcg --enable-xen it is possible
to produce a QEMU binary with no TCG nor KVM support. Skip the cdrom
boot tests if that's the case.
Fixes: 0c1ae3ff9d ("tests/qtest: Fix tests when no KVM or TCG are present")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230508181611.2621-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We cannot allow this config to be disabled at the moment as not all of
the relevant code is protected by it.
Commit 29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a
KVM-only build") moved the CONFIGs of several boards to Kconfig, so it
is now possible that nothing selects ARM_V7M (e.g. when doing a
--without-default-devices build).
Return the CONFIG_ARM_V7M entry to a state where it is always selected
whenever TCG is available.
Fixes: 29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a KVM-only build")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230508181611.2621-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Semihosting has been made a 'default y' entry in Kconfig, which does
not work because when building --without-default-devices, the
semihosting code would not be available.
Make semihosting unconditional when TCG is present.
Fixes: 29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a KVM-only build")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230508181611.2621-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity points out (in CID 1508390) that write_bootloader has
some dead code, where we assign to 'p' and then in the following
line assign to it again. This happened as a result of the
refactoring in commit cd5066f861.
Fix the dead code by removing the 'void *v' variable entirely and
instead adding a cast when calling bl_setup_gt64120_jump_kernel(), as
we do at its other callsite in write_bootloader_nanomips().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the doc sources, we have a few cross-reference targets with odd
names "pcsys_005fxyz". These are the legacy of the semi-automated
conversion of the old info docs to rST (the '005f' is because ASCII
0x5f is '_' and the old info link names had underscores in them).
Remove the targets which nothing links to, and rename the two targets
which are used to something a bit more descriptive.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230421163642.1151904-1-peter.maydell@linaro.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
When we take a PNG screenshot the ordering of the colour channels in
the data is not correct, resulting in the image having weird
colouring compared to the actual display. (Specifically, on a
little-endian host the blue and red channels are swapped; on
big-endian everything is wrong.)
This happens because the pixman idea of the pixel data and the libpng
idea differ. PIXMAN_a8r8g8b8 defines that pixels are 32-bit values,
with A in bits 24-31, R in bits 16-23, G in bits 8-15 and B in bits
0-7. This means that on little-endian systems the bytes in memory
are
B G R A
and on big-endian systems they are
A R G B
libpng, on the other hand, thinks of pixels as being a series of
values for each channel, so its format PNG_COLOR_TYPE_RGB_ALPHA
always wants bytes in the order
R G B A
This isn't the same as the pixman order for either big or little
endian hosts.
The alpha channel is also unnecessary bulk in the output PNG file,
because there is no alpha information in a screenshot.
To handle the endianness issue, we already define in ui/qemu-pixman.h
various PIXMAN_BE_* and PIXMAN_LE_* values that give consistent
byte-order pixel channel formats. So we can use PIXMAN_BE_r8g8b8 and
PNG_COLOR_TYPE_RGB, which both have an in-memory byte order of
R G B
and 3 bytes per pixel.
(PPM format screenshots get this right; they already use the
PIXMAN_BE_r8g8b8 format.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1622
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230502135548.2451309-1-peter.maydell@linaro.org
I am now employed by Daynix. Although my role as a reviewer of
macOS-related change is not very relevant to the employment, I decided
to use the company email address to avoid confusions from different
addresses.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20230506072333.32510-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently don't correctly handle the VSTCR_EL2.SW and VTCR_EL2.NSW
configuration bits. These allow configuration of whether the stage 2
page table walks for Secure IPA and NonSecure IPA should do their
descriptor reads from Secure or NonSecure physical addresses. (This
is separate from how the translation table base address and other
parameters are set: an NS IPA always uses VTTBR_EL2 and VTCR_EL2
for its base address and walk parameters, regardless of the NSW bit,
and similarly for Secure.)
Provide a new function ptw_idx_for_stage_2() which returns the
MMU index to use for descriptor reads, and use it to set up
the .in_ptw_idx wherever we call get_phys_addr_lpae().
For a stage 2 walk, wherever we call get_phys_addr_lpae():
* .in_ptw_idx should be ptw_idx_for_stage_2() of the .in_mmu_idx
* .in_secure should be true if .in_mmu_idx is Stage2_S
This allows us to correct S1_ptw_translate() so that it consistently
always sets its (out_secure, out_phys) to the result it gets from the
S2 walk (either by calling get_phys_addr_lpae() or by TLB lookup).
This makes better conceptual sense because the S2 walk should return
us an (address space, address) tuple, not an address that we then
randomly assign to S or NS.
Our previous handling of SW and NSW was broken, so guest code
trying to use these bits to put the s2 page tables in the "other"
address space wouldn't work correctly.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1600
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504135425.2748672-3-peter.maydell@linaro.org
Bit 63 in a Table descriptor is only the NSTable bit for stage 1
translations; in stage 2 it is RES0. We were incorrectly looking at
it all the time.
This causes problems if:
* the stage 2 table descriptor was incorrectly setting the RES0 bit
* we are doing a stage 2 translation in Secure address space for
a NonSecure stage 1 regime -- in this case we would incorrectly
do an immediate downgrade to NonSecure
A bug elsewhere in the code currently prevents us from getting
to the second situation, but when we fix that it will be possible.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230504135425.2748672-2-peter.maydell@linaro.org
While we cannot move the main "helper.h" out of target/arm/,
due to usage by generic code, we can move the sub-includes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230504110412.1892411-3-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These files got missed when populating tcg/.
Because they are included with "", no change to the users required.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230504110412.1892411-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OpenRISC defines tininess to be detected before rounding. Setup qemu to
obey this.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Store the PC to ensure the correct value can be read in the exception
handler.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
As per OpenRISC spec 1.4 FPCSR can be read and written in user mode.
Update mtspr and mfspr helpers to support this by moving the is_user
check into the helper.
Link: https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.4-rev0.pdf
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This header is supposed to be private to tcg and in fact
does not need to be included here at all.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, use
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, pull out
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like cpu_in_exclusive_context, but also true if
there is no other cpu against which we could race.
Use it in tb_flush as a direct replacement.
Use it in cpu_loop_exit_atomic to ensure that there
is no loop against cpu_exec_step_atomic.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses have now been expunged.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark all memory operations that are not already marked with UNALIGN.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In gen_ldx/gen_stx, the only two locations for memory operations,
mark the operation as either aligned (softmmu) or unaligned
(user-only, as if emulated by the kernel).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The opposite of MO_UNALN is MO_ALIGN.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Memory operations that are not already aligned, or otherwise
marked up, require addition of ctx->default_tcg_memop_mask.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adjust the softmmu tlb to use R0+R1, not any of the normally available
registers. Since we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
