In some places we are sure we are always running in a
coroutine, therefore it's useless to call the generated_co_wrapper,
instead call directly the _co_ function.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only difference is that blk_ checks if the block is available,
but this check is already performed above in blk_check_byte_request().
This is in preparation for the graph rdlock, which will be taken
by both the callers of blk_check_byte_request() and blk_getlength().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_getlength is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Because now this function creates a new coroutine and polls, we need to
take the AioContext lock where it is missing, for the only reason that
internally co_wrapper calls AIO_WAIT_WHILE and it expects to release the
AioContext lock.
This is especially messy when a co_wrapper creates a coroutine and polls
in bdrv_open_driver, because this function has so many callers in so
many context that it can easily lead to deadlocks. Therefore the new
rule for bdrv_open_driver is that the caller must always hold the
AioContext lock of the given bs (except if it is a coroutine), because
the function calls bdrv_refresh_total_sectors() which is now a
co_wrapper.
Once the rwlock is ultimated and placed in every place it needs to be,
we will poll using AIO_WAIT_WHILE_UNLOCKED and remove the AioContext
lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The name is not good, not the least because we are going to convert this
to a generated co_wrapper, which adds a _co infix after the first part
of the name.
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_inserted() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
At the same time, add also blk_is_inserted as co_wrapper_mixed, since it
is called in both coroutine and non-coroutine contexts.
Because now this function creates a new coroutine and polls, we need to
take the AioContext lock where it is missing, for the only reason that
internally c_w_mixed_bdrv_rdlock calls AIO_WAIT_WHILE and it expects to
release the AioContext lock. Once the rwlock is ultimated and placed in
every place it needs to be, we will poll using AIO_WAIT_WHILE_UNLOCKED
and remove the AioContext lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_io_unplug is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
The only caller of this function is blk_io_unplug(), therefore make
blk_io_unplug() a co_wrapper, so that we're always running in a
coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_io_plug is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
The only caller of this function is blk_io_plug(), therefore make
blk_io_plug() a co_wrapper, so that we're always running in a coroutine
where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just omit the various 'return' when the return type is void.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that when an error happens while writing back bitmaps to the
image file in qcow2_inactivate(), 'qemu-img bitmap/commit' actually
return an error value in their exit code instead of making the operation
look successful to scripts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230112191454.169353-5-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_unref() can't report any errors that happen while closing the image.
For example, if qcow2 hits an -ENOSPC error while writing out dirty
bitmaps when it's closed, it prints error messages to stderr, but
'qemu-img bitmap' won't see any error return value and will therefore
look successful with exit code 0.
In order to fix this, manually inactivate the image first before calling
blk_unref(). This already performs the operations that would be most
likely to fail while closing the image, but it can still return errors.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1330
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230112191454.169353-4-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_unref() can't report any errors that happen while closing the image.
For example, if qcow2 hits an -ENOSPC error while writing out dirty
bitmaps when it's closed, it prints error messages to stderr, but
'qemu-img commit' won't see any error return value and will therefore
look successful with exit code 0.
In order to fix this, manually inactivate the image first before calling
blk_unref(). This already performs the operations that would be most
likely to fail while closing the image, but it can still return errors.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230112191454.169353-3-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to write the bitmap table to the image file, it is converted to
big endian. If the write fails, it is passed to clear_bitmap_table() to
free all of the clusters it had allocated before. However, if we don't
convert it back to native endianness first, we'll free things at a wrong
offset.
In practical terms, the offsets will be so high that we won't actually
free any allocated clusters, but just run into an error, but in theory
this can cause image corruption.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230112191454.169353-2-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It has only one caller---inline it and remove the function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221215130225.476477-2-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-io's do_co_pwrite_zeroes is reinventing the coroutine wrapper
blk_pwrite_zeroes. Just use the real thing directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221215130225.476477-1-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add more annotations to functions, describing valid and invalid
calls from coroutine to non-coroutine context.
When applied to a function, no_coroutine_fn advertises that it should
not be called from coroutine_fn functions. This can be because the
function blocks or, in the case of generated_co_wrapper, to enforce
that coroutine_fn functions directly call the coroutine_fn that backs
the generated_co_wrapper.
coroutine_mixed_fn instead is for function that can be called in
both coroutine and non-coroutine context, but will suspend when
called in coroutine context. Annotating them is a first step
towards enforcing that non-annotated functions are absolutely
not going to suspend.
These can be used for example with the vrc tool:
# find functions that *really* cannot be called from no_coroutine_fn
(vrc) load --loader clang libblock.fa.p/meson-generated_.._block_block-gen.c.o
(vrc) paths [no_coroutine_fn,!coroutine_mixed_fn]
bdrv_remove_persistent_dirty_bitmap
bdrv_create
bdrv_can_store_new_dirty_bitmap
# find how coroutine_fns end up calling a mixed function
(vrc) load --loader clang --force libblock.fa.p/*.c.o
(vrc) paths [coroutine_fn] [!no_coroutine_fn]* [coroutine_mixed_fn]
...
bdrv_pread <- vhdx_log_write <- vhdx_log_write_and_flush <- vhdx_co_writev
...
Signed-off-by: Alberto Faria <afaria@redhat.com>
[Rebase, add coroutine_mixed_fn. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221216110758.559947-3-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clang has a generic __annotate__ attribute that can be used by
static analyzers to understand properties of functions and
analyze the control flow. Furthermore, unlike TSA annotations, the
__annotate__ attribute applies to function pointers as well.
As a first step towards static analysis of coroutine_fn markers,
attach the attribute to the marker when compiling with clang.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221216110758.559947-2-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently we fill the VIRT_FLASH memory space with two 64MB NOR images
when using persistent UEFI variables on virt board. Actually we only use
a very small(non-zero) part of the memory while the rest significant
large(zero) part of memory is wasted.
So this patch checks the block status and only writes the non-zero part
into memory. This requires pflash devices to use sparse files for
backends.
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
[ kraxel: rebased to latest master ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20221220084246.1984871-1-kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In downstream RHEL builds, we do not have "blkverify" enabled, so
iotest 262 is currently failing there. Thus let's list "blkverify"
as required item so that the test properly gets skipped instead if
"blkverify" is missing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230104112850.261480-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"quorum" is required by iotest 312 - if it is not compiled into the
QEMU binary, the test fails. Thus list "quorum" as required driver
so that the test gets skipped in case it is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230104114601.269351-1-thuth@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After recent header file inclusion rework the build fails when the blkio
module is enabled:
../block/blkio.c: In function ‘blkio_detach_aio_context’:
../block/blkio.c:321:24: error: implicit declaration of function ‘bdrv_get_aio_context’; did you mean ‘qemu_get_aio_context’? [-Werror=implicit-function-declaration]
321 | aio_set_fd_handler(bdrv_get_aio_context(bs),
| ^~~~~~~~~~~~~~~~~~~~
| qemu_get_aio_context
../block/blkio.c:321:24: error: nested extern declaration of ‘bdrv_get_aio_context’ [-Werror=nested-externs]
../block/blkio.c:321:24: error: passing argument 1 of ‘aio_set_fd_handler’ makes pointer from integer without a cast [-Werror=int-conversion]
321 | aio_set_fd_handler(bdrv_get_aio_context(bs),
| ^~~~~~~~~~~~~~~~~~~~~~~~
| |
| int
In file included from /home/pipo/git/qemu.git/include/qemu/job.h:33,
from /home/pipo/git/qemu.git/include/block/blockjob.h:30,
from /home/pipo/git/qemu.git/include/block/block_int-global-state.h:28,
from /home/pipo/git/qemu.git/include/block/block_int.h:27,
from ../block/blkio.c:13:
/home/pipo/git/qemu.git/include/block/aio.h:476:37: note: expected ‘AioContext *’ but argument is of type ‘int’
476 | void aio_set_fd_handler(AioContext *ctx,
| ~~~~~~~~~~~~^~~
../block/blkio.c: In function ‘blkio_file_open’:
../block/blkio.c:821:34: error: passing argument 2 of ‘blkio_attach_aio_context’ makes pointer from integer without a cast [-Werror=int-conversion]
821 | blkio_attach_aio_context(bs, bdrv_get_aio_context(bs));
| ^~~~~~~~~~~~~~~~~~~~~~~~
| |
| int
Fix it by including 'block/block-io.h' which contains the required
declarations.
Fixes: e2c1c34f13
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 2bc956011404a1ab03342aefde0087b5b4762562.1674477350.git.pkrempa@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_blk_dma_restart_cb() is tricky because the BH must deal with
virtio_blk_data_plane_start()/virtio_blk_data_plane_stop() being called.
There are two issues with the code:
1. virtio_blk_realize() should use qdev_add_vm_change_state_handler()
instead of qemu_add_vm_change_state_handler(). This ensures the
ordering with virtio_init()'s vm change state handler that calls
virtio_blk_data_plane_start()/virtio_blk_data_plane_stop() is
well-defined. Then blk's AioContext is guaranteed to be up-to-date in
virtio_blk_dma_restart_cb() and it's no longer necessary to have a
special case for virtio_blk_data_plane_start().
2. Only blk_drain() waits for virtio_blk_dma_restart_cb()'s
blk_inc_in_flight() to be decremented. The bdrv_drain() family of
functions do not wait for BlockBackend's in_flight counter to reach
zero. virtio_blk_data_plane_stop() relies on blk_set_aio_context()'s
implicit drain, but that's a bdrv_drain() and not a blk_drain().
Note that virtio_blk_reset() already correctly relies on blk_drain().
If virtio_blk_data_plane_stop() switches to blk_drain() then we can
properly wait for pending virtio_blk_dma_restart_bh() calls.
Once these issues are taken care of the code becomes simpler. This
change is in preparation for multiple IOThreads in virtio-blk where we
need to clean up the multi-threading behavior.
I ran the reproducer from commit 49b44549ac ("virtio-blk: On restart,
process queued requests in the proper context") to check that there is
no regression.
Cc: Sergio Lopez <slp@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-id: 20221102182337.252202-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When we measure FIO read performance (cache=writethrough, bs=4k,
iodepth=64) in VMs, ~80K/s notifications (e.g., EPT_MISCONFIG) are observed
from guest to qemu.
It turns out those frequent notificatons are caused by interference from
worker threads. Worker threads queue bottom halves after completing IO
requests. Pending bottom halves may lead to either aio_compute_timeout()
zeros timeout and pass it to try_poll_mode() or run_poll_handlers() returns
no progress after noticing pending aio_notify() events. Both cause
run_poll_handlers() to call poll_set_started(false) to disable poll mode.
However, for both cases, as timeout is already zeroed, the event loop
(i.e., aio_poll()) just processes bottom halves and then starts the next
event loop iteration. So, disabling poll mode has no value but leads to
unnecessary notifications from guest.
To minimize unnecessary notifications from guest, defer disabling poll
mode to when the event loop is about to be blocked.
With this patch applied, FIO seq-read performance (bs=4k, iodepth=64,
cache=writethrough) in VMs increases from 330K/s to 413K/s IOPS.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Message-id: 20220710120849.63086-1-chao.gao@intel.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not encode the pointer as a constant in the opcode stream.
This pointer is specific to the cpu that first generated the
translation, which runs into problems with both hot-pluggable
cpus and user-only threads, as cpus are removed. It's also a
potential correctness issue in the theoretical case of a
slightly-heterogenous system, because if CPU 0 generates a
TB and then CPU 1 executes it, CPU 1 will end up using CPU 0's
hash table, which might have a wrong set of registers in it.
(All our current systems are either completely homogenous,
M-profile, or have CPUs sufficiently different that they
wouldn't be sharing TBs anyway because the differences would
show up in the TB flags, so the correctness issue is only
theoretical, not practical.)
Perform the lookup in either helper_access_check_cp_reg,
or a new helper_lookup_cp_reg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230106194451.1213153-3-richard.henderson@linaro.org
[PMM: added note in commit message about correctness issue]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ri == NULL case to the top of the function and return.
This allows the else to be removed and the code unindented.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230106194451.1213153-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qemu doesn't implement Debug Communication Channel, as well as the rest
of external debug interface. However, Microsoft Hyper-V in tries to
access some of those registers during an EL2 context switch.
Since there is no architectural way to not advertise support for external
debug, provide RAZ/WI stubs for OSDTRRX_EL1, OSDTRTX_EL1 and OSECCR_EL1
registers in the same way the rest of DCM is currently done. Do account
for access traps though with access_tda.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230120155929.32384-3-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture does not define any functionality for the CLAIM tag bits.
So we will just keep the raw bits, as per spec.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230120155929.32384-2-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In v7m_exception_taken(), for v8M we set the EXC_RETURN.ES bit if
either the exception targets Secure or if the CPU doesn't implement
the Security Extension. This is incorrect: the v8M Arm ARM specifies
that the ES bit should be RES0 if the Security Extension is not
implemented, and the pseudocode agrees.
Remove the incorrect condition, so that we leave the ES bit 0
if the Security Extension isn't implemented.
This doesn't have any guest-visible effects for our current set of
emulated CPUs, because all our v8M CPUs implement the Security
Extension; but it's worth fixing in case we add a v8M CPU without
the extension in future.
Reported-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Unify the two helper_set_pstate_{sm,za} in this function.
Do not call helper_* functions from svcr_write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230112102436.1913-8-philmd@linaro.org
Message-Id: <20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARM_SBCON_I2C() macro and ArmSbconI2CState typedef are
already declared via the QOM DECLARE_INSTANCE_CHECKER()
macro in "hw/i2c/arm_sbcon_i2c.h". Drop the VERSATILE_I2C
declarations from versatile_i2c.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to rename TYPE_VERSATILE_I2C as TYPE_ARM_SBCON_I2C
(the formal ARM naming), start renaming its state.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define TYPE_GPIO_I2C in the public "hw/i2c/bitbang_i2c.h"
header and use it in hw/arm/musicpal.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20230111085016.44551-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BASEPRI, FAULTMASK, and their _NS equivalents only exist on devices with
the Main Extension. However, the MRS instruction did not check this,
and the MSR instruction handled it inconsistently (warning BASEPRI, but
silently ignoring writes to BASEPRI_NS). Unify this behavior and always
warn when reading or writing any of these registers if the extension is
not present.
Signed-off-by: David Reiss <dreiss@meta.com>
Message-id: 167330628518.10497.13100425787268927786-0@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a 64-bit register on AArch64, even if the high 44 bits
are RES0. Because this is defined as ARM_CP_STATE_BOTH, we are
asserting that the cpreg field is 64-bits.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1400
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230115171633.3171890-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
