On MIPS, QEMU requires KVM_VM_MIPS_VZ type for KVM. Report an error in
such a case as other architectures do when an error occurred during KVM
type decision.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-4-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model, which is used by libvirt to probe the availability of
KVM.
For MIPS, the existing mips_kvm_type() is reused. This function ensures
the availability of VZ which is mandatory to use KVM on the current
QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added doc comment for new function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity points out that in page_table_walk_refill() we can
shift by a negative number, which is undefined behaviour
(CID 1452918, 1452920, 1452922). We already catch the
negative directory_shift and leaf_shift as being a "bail
out early" case, but not until we've already used them to
calculated some offset values.
The shifts can be negative only if ptew > 1, so make the
bail-out-early check look directly at that, and only
calculate the shift amounts and the offsets based on them
after we have done that check. This allows
us to simplify the expressions used to calculate the
shift amounts, use an unsigned type, and avoids the
undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[PMD: Check for ptew > 1, use unsigned type]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230717213504.24777-3-philmd@linaro.org>
We already evaluated directory_shift and leaf_shift in
page_table_walk_refill(), no need to do that again: pass
as argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230717213504.24777-2-philmd@linaro.org>
Coverity reports a potential overruns (CID 1517770):
Overrunning array "mxu_gpr" of 15 8-byte elements at
element index 4294967295 (byte offset 34359738367)
using index "XRb - 1U" (which evaluates to 4294967295).
Add a gen_extract_mxu_gpr() helper similar to
gen_load_mxu_gpr() to safely extract MXU registers.
Fixes: eb79951ab6 ("target/mips/mxu: Add Q8ADDE ... insns")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-4-philmd@linaro.org>
Coverity reports a potential overrun (CID 1517769):
Overrunning array "mxu_gpr" of 15 8-byte elements at
element index 4294967295 (byte offset 34359738367)
using index "XRb - 1U" (which evaluates to 4294967295).
Use gen_load_mxu_gpr() to safely load MXU registers.
Fixes: ff7936f009 ("target/mips/mxu: Add S32SLT ... insns")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-2-philmd@linaro.org>
GINVI and GINVT operations are supported on MIPS I6400 and I6500 cores,
so indicate that properly in CP0.Config5 register bits [16:15].
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630072806.3093704-1-marcin.nowakowski@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction implements SAD (sum-absolute-difference) operation which
is used in motion estimation algorithms. The instruction handles four
8-bit data in parallel.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-34-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction shuffles 8 bytes in two registers by
one of 4 predefined patterns.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-33-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is used to parallel multiply and accumulate
four 8-bit data.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-32-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is used to determine sign of four 16-bit
packed data in parallel.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-31-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions do parallel quad 8-bit multiply and accumulate.
They are close to existing Q8MUL Q8MULSU so the generation
function modified to support all of them.
Also the patch fixes decoding of Q8MULSU according to tests on
hardware.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-30-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are:
- single 32-bit
- dual 16-bit packed
- quad 8-bit packed
conditional moves.
They are grouped in pool20 in the source code.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-29-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are counterparts for D32/Q16-SLL/SLR/SAR with
difference that the shift amount placed into GPR.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-28-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are same data shift in various directions, thus one
generation function is implemented for all three.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-27-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are same data shift in various directions, thus one
generation function is implemented for all three.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-26-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are dual 32-bit arithmetic shift right and
pack LSBs to 2x 16-bit into a MXU register.
The difference is the shift amount source: immediate or GP reg.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-25-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool16, see the grand opcode organization
tree on top of the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-24-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool15, see the grand opcode organization
tree on top of the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-23-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all load/store a halfword from memory
and put it into/get it from MXU register in various combinations.
I-suffix instructions modify the base address GPR by offset provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-22-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all load/store a byte from memory
and put it into/get it from MXU register in various combinations.
I-suffix instructions modify the base address GPR by offset provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-21-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 8-bit addition/subtraction in
various combinations. Most instructions are grouped in pool14,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-20-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 16-bit addition/subtraction in
various combinations. The instructions are grouped in pool13,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-19-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds two 32-bit values with respect
to corresponding carry flags in MXU_CR.
XRa += XRb + LeftCarry flag;
XRd += XRc + RightCarry flag;
Suddenly, it doesn't modify carry flags as a result of addition.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-18-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 32-bit addition/subtraction in
various combinations. The instructions are grouped in pool12,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-17-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds/subtracts two 32-bit values in XRb and XRc.
Placing results in XRa and XRd and updates carry bits for each
path in the MXU control register.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-16-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds/subtracts four 16-bit packed in XRb and XRc.
Placing packed 16-bit results in XRa and XRd.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-15-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is similar to multiply and accumulate
but works with MXU registers set.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-14-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is similar to multiply and accumulate
but works with MXU registers set.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-13-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are close to D16MAC so common generation function
provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-12-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool3, see the grand tree above
in the file.
The instructions are close to D16MUL so common generation function
provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-11-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool2, see the grand tree above
in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-10-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This instruction is used to add/subtract quadruple
8-bit values to another quadruple in parallel.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-9-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool1, see the grand tree above
in the file. Q8ADD is part of pool1 too but belong to another
category of instructions, thus will be made in later patches.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-8-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions were designed that they overwrite source
register during partial storing of result.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-7-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are used to set bits depending on
comparison result in each byte respectively.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-6-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions used to multiply 2x32-bit GPR sources & accumulate
result into 64-bit pair of XRF registers.
These instructions stain HI/LO registers with the final result.
Their opcode is close to the MIPS32R1 MADD[U]/MSUB[U], so it have to
call decode_opc_special2_legacy when failing to find MXU opcode.
Moreover, it solves issue with reinventing MUL and malfunction
MULU/CLZ/CLO instructions.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-5-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions used to load from memory to GPR via indexed address
divided by base and index parts in GPR registers.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-4-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
XBurstR1 - is the MIPS32R1 CPU which aims to cover all Ingenic SoCs
older than JZ4770 and some newer.
XBurstR2 - is the MIPS32R2 CPU which aims to cover all Ingenic SoCs
starting from to JZ4770.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-3-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add support for emulating:
- S32LDDV and S32LDDVR
- S32STD and S32STDR
- S32STDV and S32STDVR
MXU instructions.
Add support for emulating MXU instructions with address register
post-modify counterparts:
- S32LDI and S32LDIR
- S32LDIV and S32LDIVR
- S32SDI and S32SDIR
- S32SDIV and S32SDIVR
Refactor support for emulating the S32LDD and S32LDDR instructions.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-2-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Loongson introduced CSR instructions since 3A4000, which looks
similar to IOCSR and CPUCFG instructions we seen in LoongArch.
Unfortunately we don't have much document about those instructions,
bit fields of CPUCFG instructions and IOCSR registers can be found
at 3A4000's user manual, while instruction encodings can be found
at arch/mips/include/asm/mach-loongson64/loongson_regs.h from
Linux Kernel.
Our predefined CPUCFG bits are differ from actual 3A4000, since
we can't emulate all CPUCFG features present in 3A4000 for now,
we just enable bits for what we have in TCG.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com>
[JY: Fixed typo in ase_lcsr_available(),
retrict GEN_FALSE_TRANS]
[PMD: Fix meson's mips_softmmu_ss -> mips_system_ss,
restrict AddressSpace/MemoryRegion to SysEmu]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Previous implementation of MIPS cp0_timer computes a
cp0_count_ns based on input clock. However rounding
error of cp0_count_ns can affect precision of cp0_timer.
Using clock API and a divider for cp0_timer, so we can
use clock_ns_to_ticks/clock_ns_to_ticks to avoid rounding
issue.
Also workaround the situation that in such handler flow:
count = read_c0_count()
write_c0_compare(count)
If timer had not progressed when compare was written, the
interrupt would trigger again.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230521110037.90049-1-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in via exec/exec-all.h, via exec/translator.h,
but the include of exec-all.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/log.h.
Drop otherwise unused includes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These two items are the last uses of TARGET_LONG_BITS within tcg.h,
and are more in common with the other "_tl" definitions within that file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
