It is possible to have another VLAN tag even if the packet is already
tagged.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The uses of uint8_t pointers were misleading as they are never accessed
as an array of octets and it even require more strict alignment to
access as struct eth_header.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Section 13.7.15 Receive Length Error Count says:
> Packets over 1522 bytes are oversized if LongPacketEnable is 0b
> (RCTL.LPE). If LongPacketEnable (LPE) is 1b, then an incoming packet
> is considered oversized if it exceeds 16384 bytes.
> These lengths are based on bytes in the received packet from
> <Destination Address> through <CRC>, inclusively.
As QEMU processes packets without CRC, the number of bytes for CRC
need to be subtracted. This change adds some size definitions to be used
to derive the new size thresholds to eth.h.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The old eth_setup_vlan_headers has no user so remove it and rename
eth_setup_vlan_headers_ex.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb does not properly ensure the buffer passed to
net_rx_pkt_set_protocols() is contiguous for the entire L2/L3/L4 header.
Allow it to pass scattered data to net_rx_pkt_set_protocols().
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* Enable the "bios bits" avocado test in the gitlab-CI
* Another minor fix for the redundancy DMA blocker code
-----BEGIN PGP SIGNATURE-----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=m1Px
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu into staging
* First batch of fixes to allow "make check" with "--without-default-devices"
* Enable the "bios bits" avocado test in the gitlab-CI
* Another minor fix for the redundancy DMA blocker code
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRrVhoRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUaiRAApPVveet6WPQ7Ag1448LtqHTGiwl8x2Ba
# jQ7FTKhqdTC5O+/BU7IQkvGmErPxCc8WPB7eoowwBVA/4dr8YIIBLKqO4RtP6LXs
# rtUkzsPI9ExW+iJjIMVOmHsp/shlRhuf+Tmlr8OsTObecCeA4Vbxc+RlvYXfCPhM
# 8tOuLO8n6LQY/62fgXSzI5WlLQSzIo3aDSmCeWa1QHkPLf6itvGkwsNBytMJLoUT
# pXZnBNqlXiuyPtloLp+DMfRRkpq8AHB04+Sri7TVPxi7bJL28RMZiaAXpvHSFLz8
# JR2ApRrzBthiLMK1I6A0c2ZGCbVOAi1dhNDNqWCyx8ZBASEJj0XuT/+Qse81sKmG
# zNXr57x0CzWAJ59/taBM2hjUks10rJOmxHJYxS6i1JJR7u1zTuvii7toPMmf35zX
# bM7TYjKpYGa2HneHpw1eOjpTgUYZpgla/pVXZhKqoGdfmseBMlFU424MNl/xDRng
# bxuam3Ku+ClOeQlzXt8aceL/gTApJfvy5FAIAK5yUOQDTs6HjJJL2AfcOzss8kXb
# k6IMHgV1tnLed8B7K4iml2rzvk+RT3CPGvmaNwSAkdh8SnE5/bv1I6s4fHiXMlvC
# mmfvFSoWwdhcsD5r+XOFxfke8sGrOeQIXKefp6UL3hYVV7o2NUe89BytXZCzut/Y
# 6ulR25HHtmI=
# =m1Px
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 22 May 2023 04:46:34 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu:
memory: stricter checks prior to unsetting engaged_in_io
acpi/tests/avocado/bits: enable bios bits avocado tests on gitlab CI pipeline
.gitlab-ci.d/buildtest.yml: Run full "make check" with --without-default-devices
tests/qemu-iotests/172: Run QEMU with -vga none and -nic none
tests/qtest/meson.build: Run the net filter tests only with default devices
tests/qtest: Check for the availability of virtio-ccw devices before using them
tests/qtest/virtio-ccw-test: Remove superfluous tests
tests/qtest/cdrom-test: Fix the test to also work without optional devices
tests/qtest/usb-hcd-uhci-test: Skip test if UHCI controller is not available
tests/qtest/readconfig-test: Check for the availability of USB controllers
hw/sparc64/sun4u: Use MachineClass->default_nic and MachineClass->no_parallel
hw/i386: Ignore the default parallel port if it has not been compiled into QEMU
hw/char/parallel: Move TYPE_ISA_PARALLEL to the header file
hw/sh4: Use MachineClass->default_nic in the sh4 r2d machine
hw/s390x: Use MachineClass->default_nic in the s390x machine
hw/ppc: Use MachineClass->default_nic in the ppc machines
softmmu/vl.c: Disable default NIC if it has not been compiled into the binary
hw: Move the default NIC machine class setting from the x86 to the generic one
softmmu/vl.c: Check for the availability of the VGA device before using it
hw/i386/Kconfig: ISAPC works fine without VGA_ISA
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- qcow2 spec: Rename "zlib" compression to "deflate"
- Honour graph read lock even in the main thread + prerequisite fixes
- aio-posix: do not nest poll handlers (fixes infinite recursion)
- Refactor QMP blockdev transactions
- graph-lock: Disable locking for now
- iotests/245: Check if 'compress' driver is available
-----BEGIN PGP SIGNATURE-----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=edNP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- qcow2 spec: Rename "zlib" compression to "deflate"
- Honour graph read lock even in the main thread + prerequisite fixes
- aio-posix: do not nest poll handlers (fixes infinite recursion)
- Refactor QMP blockdev transactions
- graph-lock: Disable locking for now
- iotests/245: Check if 'compress' driver is available
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRnrxURHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9aHyw/9H0xpceVb0kcC5CStOWCcq4PJHzkl/8/m
# c6ABFe0fgEuN2FCiKiCKOt6+V7qaIAw0+YLgPr/LGIsbIBzdxF3Xgd2UyIH6o4dK
# bSaIAaes6ZLTcYGIYEVJtHuwNgvzhjyBlW5qqwTpN0YArKS411eHyQ3wlUkCEVwK
# ZNmDY/MC8jq8r1xfwpPi7CaH6k1I6HhDmyl1PdURW9hmoAKZQZMhEdA5reJrUwZ9
# EhfgbLIaK0kkLLsufJ9YIkd+b/P3mUbH30kekNMOiA0XlnhWm1Djol5pxlnNiflg
# CGh6CAyhJKdXzwV567cSF11NYCsFmiY+c/l0xRIGscujwvO4iD7wFT5xk2geUAKV
# yaox8JA7Le36g7lO2CRadlS24/Ekqnle6q09g2i8s2tZwB4fS286vaZz6QDPmf7W
# VSQp9vuDj6ZcVjMsuo2+LzF3yA2Vqvgd9s032iBAjRDSGLAoOdQZjBJrreypJ0Oi
# pVFwgK+9QNCZBsqVhwVOgElSoK/3Vbl1kqpi30Ikgc0epAn0suM1g2QQPJ2Zt/MJ
# xqMlTv+48OW3vq3ebr8GXqkhvG/u0ku6I1G6ZyCrjOce89osK8QUaovERyi1eOmo
# ouoZ8UJJa6VfEkkmdhq2vF6u/MP4PeZ8MW3pYQy6qEnSOPDKpLnR30Z/s/HZCZcm
# H4QIbfQnzic=
# =edNP
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 19 May 2023 10:17:09 AM PDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (21 commits)
iotests: Test commit with iothreads and ongoing I/O
nbd/server: Fix drained_poll to wake coroutine in right AioContext
graph-lock: Disable locking for now
tested: add test for nested aio_poll() in poll handlers
aio-posix: do not nest poll handlers
iotests/245: Check if 'compress' driver is available
graph-lock: Honour read locks even in the main thread
blockjob: Adhere to rate limit even when reentered early
test-bdrv-drain: Call bdrv_co_unref() in coroutine context
test-bdrv-drain: Take graph lock more selectively
qemu-img: Take graph lock more selectively
qcow2: Unlock the graph in qcow2_do_open() where necessary
block/export: Fix null pointer dereference in error path
block: Call .bdrv_co_create(_opts) unlocked
docs/interop/qcow2.txt: fix description about "zlib" clusters
blockdev: qmp_transaction: drop extra generic layer
blockdev: use state.bitmap in block-dirty-bitmap-add action
blockdev: transaction: refactor handling transaction properties
blockdev: qmp_transaction: refactor loop to classic for
blockdev: transactions: rename some things
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are going to require the macro from other files, too, so move
this #define to the header file.
Message-Id: <20230512124033.502654-9-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are going to re-use this setting for other targets, so let's
move this to the main MachineClass.
Message-Id: <20230512124033.502654-4-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CXL volatile memory support
More memslots for vhost-user on x86 and ARM.
vIOMMU support for vhost-vdpa
pcie-to-pci bridge can now be compiled out
MADT revision bumped to 3
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRniWoPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpN4MH/RqdvHmujrjvjzXbbN/gq87Njp+kQLKEooIE
ZkqdNaVUE6vjCH8iU+chjsxt4VSquSjOL9CWWrYefEIeqCFLWsuXSAY0VDAbY67x
+aes51tTYILVsx7fbb+T5mJKRgVuWW4C5KaGeQ1djSexy42nvplZUJdIJUhZr0t9
dzzOsD+mezHS7Xu2QOzSfl5QQRuOVVJnjJXkqJG/yRvHrZM5aTolatr/X7jNGedm
4oyMsVMaAcQ+dnEQigRJodf/MpFfs9DfNZAH55VwwQWsNT0t0ueD0xigR203jjaE
mJJJipAqetFax2JjC7QMXWf+LR36BnL/0/xH+x/BWb0FI42wr0I=
=ajmR
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
CXL volatile memory support
More memslots for vhost-user on x86 and ARM.
vIOMMU support for vhost-vdpa
pcie-to-pci bridge can now be compiled out
MADT revision bumped to 3
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRniWoPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpN4MH/RqdvHmujrjvjzXbbN/gq87Njp+kQLKEooIE
# ZkqdNaVUE6vjCH8iU+chjsxt4VSquSjOL9CWWrYefEIeqCFLWsuXSAY0VDAbY67x
# +aes51tTYILVsx7fbb+T5mJKRgVuWW4C5KaGeQ1djSexy42nvplZUJdIJUhZr0t9
# dzzOsD+mezHS7Xu2QOzSfl5QQRuOVVJnjJXkqJG/yRvHrZM5aTolatr/X7jNGedm
# 4oyMsVMaAcQ+dnEQigRJodf/MpFfs9DfNZAH55VwwQWsNT0t0ueD0xigR203jjaE
# mJJJipAqetFax2JjC7QMXWf+LR36BnL/0/xH+x/BWb0FI42wr0I=
# =ajmR
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 19 May 2023 07:36:26 AM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (40 commits)
hw/i386/pc: No need for rtc_state to be an out-parameter
hw/i386/pc: Create RTC controllers in south bridges
hw/cxl: Introduce cxl_device_get_timestamp() utility function
hw/cxl: rename mailbox return code type from ret_code to CXLRetCode
hw/pci-bridge: make building pcie-to-pci bridge configurable
virtio-pci: add handling of PCI ATS and Device-TLB enable/disable
hw/pci-host/pam: Make init_pam() usage more readable
hw/i386/pc: Initialize ram_memory variable directly
hw/i386/pc_{q35,piix}: Minimize usage of get_system_memory()
hw/i386/pc_{q35,piix}: Reuse MachineClass::desc as SMB product name
hw/i386/pc_q35: Reuse machine parameter
hw/pci-host/q35: Inline sysbus_add_io()
hw/pci-host/i440fx: Inline sysbus_add_io()
vhost-vdpa: Add support for vIOMMU.
vhost-vdpa: Add check for full 64-bit in region delete
vhost_vdpa: fix the input in trace_vhost_vdpa_listener_region_del()
vhost: expose function vhost_dev_has_iommu()
virtio-crypto: fix NULL pointer dereference in virtio_crypto_free_request
virtio-net: not enable vq reset feature unconditionally
vhost-user: Remove acpi-specific memslot limit
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
nbd_drained_poll() generally runs in the main thread, not whatever
iothread the NBD server coroutine is meant to run in, so it can't
directly reenter the coroutines to wake them up.
The code seems to have the right intention, it specifies the correct
AioContext when it calls qemu_aio_coroutine_enter(). However, this
functions doesn't schedule the coroutine to run in that AioContext, but
it assumes it is already called in the home thread of the AioContext.
To fix this, add a new thread-safe qio_channel_wake_read() that can be
called in the main thread to wake up the coroutine in its AioContext,
and use this in nbd_drained_poll().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230517152834.277483-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When jobs are sleeping, for example to enforce a given rate limit, they
can be reentered early, in particular in order to get paused, to update
the rate limit or to get cancelled.
Before this patch, they behave in this case as if they had fully
completed their rate limiting delay. This means that requests are sped
up beyond their limit, violating the constraints that the user gave us.
Change the block jobs to sleep in a loop until the necessary delay is
completed, while still allowing cancelling them immediately as well
pausing (handled by the pause point in job_sleep_ns()) and updating the
rate limit.
This change is also motivated by iotests cases being prone to fail
because drain operations pause and unpause them so often that block jobs
complete earlier than they are supposed to. In particular, the next
commit would fail iotests 030 without this change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-8-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are functions that modify the graph, so they must be able to take
a writer lock. This is impossible if they already hold the reader lock.
If they need a reader lock for some of their operations, they should
take it internally.
Many of them go through blk_*(), which will always take the lock itself.
Direct calls of bdrv_*() need to take the reader lock. Note that while
locking for bdrv_co_*() calls is checked by TSA, this is not the case
for the mixed_coroutine_fns bdrv_*(). Holding the lock is still required
when they are called from coroutine context like here!
This effectively reverts 4ec8df0183, but adds some internal locking
instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the RTC is created as part of the southbridges it doesn't need
to be an out-parameter any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230519084734.220480-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just like in the real hardware (and in PIIX4), create the RTC
controllers in the south bridges.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230519084734.220480-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are new users of this functionality coming shortly so factor
it out from the GET_TIMESTAMP mailbox command handling.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230423162013.4535-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to PCIe Address Translation Services specification 5.1.3.,
ATS Control Register has Enable bit to enable/disable ATS. Guest may
enable/disable PCI ATS and, accordingly, Device-TLB for the VirtIO PCI
device. So, raise/lower a flag and call a trigger function to pass this
event to a device implementation.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Message-Id: <20230512135122.70403-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unlike pam_update() which takes the subject -- PAMMemoryRegion -- as
first argument, init_pam() takes it as fifth (!) argument. This makes it
quite hard to figure out what an init_pam() invocation actually
initializes. By moving the subject to the front this should become
clearer.
While at it, lower the DeviceState parameter to Object, also
communicating more clearly that this parameter is just the owner rather
than some (heavy?) dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213162004.2797-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Going through pc_memory_init() seems quite complicated for a simple
assignment.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213162004.2797-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
1. The vIOMMU support will make vDPA can work in IOMMU mode. This
will fix security issues while using the no-IOMMU mode.
To support this feature we need to add new functions for IOMMU MR adds and
deletes.
Also since the SVQ does not support vIOMMU yet, add the check for IOMMU
in vhost_vdpa_dev_start, if the SVQ and IOMMU enable at the same time
the function will return fail.
2. Skip the iova_max check vhost_vdpa_listener_skipped_section(). While
MR is IOMMU, move this check to vhost_vdpa_iommu_map_notify()
Verified in vp_vdpa and vdpa_sim_net driver
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-5-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support vIOMMU in vdpa, need to exposed the function
vhost_dev_has_iommu, vdpa will use this function to check
if vIOMMU enable.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since it's implementation on v8.0.0-rc0, having the PCI_ERR_UNCOR_MASK
set for machine types < 8.0 will cause migration to fail if the target
QEMU version is < 8.0.0 :
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10a read: 40 device: 0 cmask: ff wmask: 0 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load e1000e:parent_obj
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:02.0/e1000e'
qemu-system-x86_64: load of migration failed: Invalid argument
The above test migrated a 7.2 machine type from QEMU master to QEMU 7.2.0,
with this cmdline:
./qemu-system-x86_64 -M pc-q35-7.2 [-incoming XXX]
In order to fix this, property x-pcie-err-unc-mask was introduced to
control when PCI_ERR_UNCOR_MASK is enabled. This property is enabled by
default, but is disabled if machine type <= 7.2.
Fixes: 010746ae1d ("hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20230503002701.854329-1-leobras@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1576
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit enables each CXL Type-3 device to contain one volatile
memory region and one persistent region.
Two new properties have been added to cxl-type3 device initialization:
[volatile-memdev] and [persistent-memdev]
The existing [memdev] property has been deprecated and will default the
memory region to a persistent memory region (although a user may assign
the region to a ram or file backed region). It cannot be used in
combination with the new [persistent-memdev] property.
Partitioning volatile memory from persistent memory is not yet supported.
Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped
at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hi
Based on latest reviewed parts of migration:
- Disable colo (vladimir)
- Migration atomic counters (juan)
Please apply.
-----BEGIN PGP SIGNATURE-----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=3x32
-----END PGP SIGNATURE-----
Merge tag 'migration-20230518-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
Hi
Based on latest reviewed parts of migration:
- Disable colo (vladimir)
- Migration atomic counters (juan)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRmXJUACgkQ9IfvGFhy
# 1yNRAxAAjDYJELL34Qovt/WE9qKhYJEvIUGTl1IMWJ22YMFnqIFKRdka57dWoU3P
# 7EK1BHmokEEtzGT7Fe1ecERXsOwQIJDIkDTJ5g8Oc8Jt1iqY1AC8h5T+LghijCar
# mbZ6qWHaSjsg2lmek/xc9quymzFGGK36PSyB5WkaLRviKQn4RIkEDpUaWny7nDbA
# Q8zJJpBqNFqKfC5/DN0ePa3QQscXQJhey3nxqFd8hYp8RFNIV5UJVW5Lf6ombtK7
# atgdWC4ckkfO2z3OsghKeo/UiMFWpPktgBVVMhDLmk+P/E6czc2gfzD6SCvrPKTj
# XowI8hro22HVmq9bEY8PtbjMOfpxrAxer+tM2KR/0O9l3UzUacFsi7KGqCJ1/trQ
# 1tSDjlgyczb8GOgLwwxj8XE+jPHPfVrzCNfDqrBKBNxz6nnZSdZUwhV5mG8FdVtm
# oVVV96BIrNXLl/lIxYIFD/Zyvl8/lrSWQdLkEHTzihYQeXaQfyvPVbV/dOLT4sii
# YUuGCuEhF+DW/qz43G1krwq5/bfxsiZoQzrMV/Odtf0wYQKkabA3KNBIda/vxBCR
# dsLQ7QtmOwKmCzjqw4LUov9vDNYOYr98o7ZqwJ3qeKL4QgFwtEZUFO3VW6UR8fnF
# arVXiTn9wVlkTpu4sT5hLm9400iadhX4Fppji7Ce0tUpLbWbghA=
# =3x32
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 10:12:53 AM PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230518-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: Fix duplicated included in meson.build
migration/multifd: Compute transferred bytes correctly
migration: We don't need the field rate_limit_used anymore
migration: Use migration_transferred_bytes() to calculate rate_limit
migration: Add a trace for migration_transferred_bytes
migration: Move migration_total_bytes() to migration-stats.c
migration: Move rate_limit_max and rate_limit_used to migration_stats
qemu-file: Account for rate_limit usage on qemu_fflush()
migration: Don't use INT64_MAX for unlimited rate
migration: process_incoming_migration_co(): move colo part to colo
migration: split migration_incoming_co
configure: add --disable-colo-proxy option
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's make better public interface for COLO: instead of
colo_process_incoming_thread and not trivial logic around creating the
thread let's make simple colo_incoming_co(), hiding implementation from
generic code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the last stage of live migration or memory slot removal, the
backup bitmap needs to be synchronized when it has been enabled.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The global dirty log synchronization is used when KVM and dirty ring
are enabled. There is a particularity for ARM64 where the backup
bitmap is used to track dirty pages in non-running-vcpu situations.
It means the dirty ring works with the combination of ring buffer
and backup bitmap. The dirty bits in the backup bitmap needs to
collected in the last stage of live migration.
In order to identify the last stage of live migration and pass it
down, an extra parameter is added to the relevant functions and
callbacks. This last stage indicator isn't used until the dirty
ring is enabled in the subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG will need this declaration, without all of the other
bits that come with cpu-all.h.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest tlb parameters from TCG compilation.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits,
as we need one or two host registers to represent the guest address.
Create the new opcodes and update all users. Since we have not
yet eliminated TARGET_LONG_BITS, only one of the two opcodes will
ever be used, so we can get away with treating them the same in
the backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand from TCGv to TCGTemp inline in the translators,
and validate that the size matches tcg_ctx->addr_type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand from TCGv to TCGTemp inline in the translators,
and validate that the size matches tcg_ctx->addr_type.
These inlines will eventually be seen only by target-specific code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_LONG_BITS within tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we do this inside gen_empty_mem_cb anyway, let's
do this earlier inside tcg expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Adjust tcg_out_{ld,st}_helper_args to match.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already pass uint64_t to restore_state_to_opc; this changes all
of the other uses from insn_start through the encoding to decoding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add opcodes for backend support for 128-bit memory operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Notice when Intel or AMD have guaranteed that vmovdqa is atomic.
The new variable will also be used in generated code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG backends may need to defer to a helper to implement
the atomicity required by a given operation. Mirror the
interface used in system mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This field may be used to describe the precise atomicity requirements
of the guest, which may then be used to constrain the methods by which
it may be emulated by the host.
For instance, the AArch64 LDP (32-bit) instruction changes semantics
with ARMv8.4 LSE2, from
MO_64 | MO_ATOM_IFALIGN_PAIR
(64-bits, single-copy atomic only on 4 byte units,
nonatomic if not aligned by 4),
to
MO_64 | MO_ATOM_WITHIN16
(64-bits, single-copy atomic within a 16 byte block)
The former may be implemented with two 4 byte loads, or a single 8 byte
load if that happens to be efficient on the host. The latter may not
be implemented with two 4 byte loads and may also require a helper when
misaligned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In some spots, it would be helpful to be able to use TARGET_NAME
in common (target independent) code, too. Thus introduce a wrapper
that can be called from common code, too, just like we already
have one for target_words_bigendian().
Message-Id: <20230424160434.331175-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For being able to create a universal QEMU binary one day, core
files like machine-qmp-cmds.c must not contain any "#ifdef TARGET_..."
parts. Thus let's provide the target specific function via a
function pointer in CPUClass instead, as a first step towards
making this file target independent.
Message-Id: <20230424160434.331175-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Kernel commit 292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown
for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail
if the VM is not larger than 2GiB. QEMU would attempt it and fail,
print an error message, and then proceed with a normal teardown.
Avoid attempting to use asynchronous teardown altogether when the VM is
not larger than 2 GiB. This will avoid triggering the error message and
also avoid pointless overhead; normal teardown is fast enough for small
VMs.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot")
Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230510105531.30623-2-imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix inline function parameter in pv.h]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The lifetime of the PCIBridgeWindows instance accessed via the windows pointer
in struct PCIBridge is managed separately from the PCIBridge itself.
Triggered by ./qemu-system-x86_64 -M x-remote -display none -monitor stdio
QEMU monitor: device_add cxl-downstream
In some error handling paths (such as the above due to attaching a cxl-downstream
port anything other than a cxl-upstream port) the g_free() of the PCIBridge
windows in pci_bridge_region_cleanup() is called before the final call of
flatview_uref() in address_space_set_flatview() ultimately from
drain_call_rcu()
At one stage this resulted in a crash, currently can still be observed using
valgrind which records a use after free.
When present, only one instance is allocated. pci_bridge_update_mappings()
can operate directly on an instance rather than creating a new one and
swapping it in. Thus there appears to be no reason to not directly
couple the lifetimes of the two structures by embedding the PCIBridgeWindows
within the PCIBridge removing the need for the problematic separate free.
Patch is same as was posted deep in the discussion.
https://lore.kernel.org/qemu-devel/20230403171232.000020bb@huawei.com/
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421122550.28234-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All types used are forward-declared in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405160454.97436-2-philmd@linaro.org>
[thuth: Add hw/core/cpu.h to migration/dirtyrate.c to fix compile failure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
+wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
=Q8xW
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
# c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
# yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
# +wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
# QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
# R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
# CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
# =Q8xW
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 09:04:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
docs/zoned-storage:add zoned emulation use case
virtio-blk: add some trace events for zoned emulation
block: add accounting for zone append operation
virtio-blk: add zoned storage emulation for zoned devices
block: add some trace events for zone append
qemu-iotests: test zone append operation
block: introduce zone append write for zoned devices
file-posix: add tracking of the zone write pointers
docs/zoned-storage: add zoned device documentation
block: add some trace events for new block layer APIs
iotests: test new zone operations
block: add zoned BlockDriver check to block layer
block/raw-format: add zone operations to pass through requests
block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ioctls
block/file-posix: introduce helper functions for sysfs attributes
block/block-common: add zoned device structs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hi
On this PULL:
- use xxHash for calculate dirty_rate (andrei)
- Create qemu_target_pages_to_MiB() and use them (quintela)
- make dirtyrate target independent (quintela)
- Merge 5 patches from atomic counters series (quintela)
Please apply.
-----BEGIN PGP SIGNATURE-----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=8gfA
-----END PGP SIGNATURE-----
Merge tag 'migration-20230515-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request 20230515
Hi
On this PULL:
- use xxHash for calculate dirty_rate (andrei)
- Create qemu_target_pages_to_MiB() and use them (quintela)
- make dirtyrate target independent (quintela)
- Merge 5 patches from atomic counters series (quintela)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRiJoUACgkQ9IfvGFhy
# 1yO1ExAAsSStVAUh/tSgu5fhXydJVkBMO6LOj1k+tA7qylwv4QsqZ/pLNBvY8Zms
# 8/bpYtlvw1LwCSaq01oNA6RhBhkBaZ5x0PUViCY87dsJhu0hEo68Jcp0FkrkW93E
# OiIsp9NU7wpnqd88ZhzjcZ/viWebPw3660V5KY4/8ZZFVxJaKMhG+vW3pGYH8yDR
# TmZK5E5e3t5yiwDRRPrkAw3+e+GDwfwNuOBkk+NBJdL1mOZnIfVwFwxRAXWn/vEM
# f6NdT3aXplsNeKPCN1w9zrLhOJdHeu8IlhWhT/cjTgOKemBJBYzftH6dI/X9D0ix
# ghWAzFSJh1S38gw0mMef1VERJqh7JpAkTq7vT2x7J/0UIbIAru0yRiSrHbNBCcvL
# efsVFtjyseKq70qKN515uoqbK6mlnxP+eECIAUmesUx0bJI9jDWzn+KVc86xUvWy
# +98KDcPuYVxdVp4XHAIsyHYOfTY/tJwG5KI4hYgGP7uxFVr/qus3eBB/Q5BBVPOx
# X0A/760iehfV0V0UmVEt8mC7uDjI0JBouenUHcURAtbsnuGRMCz6s1kLsZYaHuGV
# NhihXq6jnwcvn2nGGnXY44TsgBWesfUrCFZOjJzbaSjGH5UpipC0SECKqh1GKoQP
# kdknvyej5h8egU2QFdS8sCUeXIfwAtHfCamtnui3b3E3iF3TSco=
# =8gfA
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 05:33:09 AM PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230515-pull-request' of https://gitlab.com/juan.quintela/qemu:
qemu-file: Remove total from qemu_file_total_transferred_*()
qemu-file: Make rate_limit_used an uint64_t
qemu-file: make qemu_file_[sg]et_rate_limit() use an uint64_t
migration: We set the rate_limit by a second
migration: A rate limit value of 0 is valid
migration: Make dirtyrate.c target independent
migration: Teach dirtyrate about qemu_target_page_bits()
migration: Teach dirtyrate about qemu_target_page_size()
Use new created qemu_target_pages_to_MiB()
softmmu: Create qemu_target_pages_to_MiB()
migration/calc-dirty-rate: replaced CRC32 with xxHash
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A zone append command is a write operation that specifies the first
logical block of a zone as the write position. When writing to a zoned
block device using zone append, the byte offset of the call may point at
any position within the zone to which the data is being appended. Upon
completion the device will respond with the position where the data has
been written in the zone.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since Linux doesn't have a user API to issue zone append operations to
zoned devices from user space, the file-posix driver is modified to add
zone append emulation using regular writes. To do this, the file-posix
driver tracks the wp location of all zones of the device. It uses an
array of uint64_t. The most significant bit of each wp location indicates
if the zone type is conventional zones.
The zones wp can be changed due to the following operations issued:
- zone reset: change the wp to the start offset of that zone
- zone finish: change to the end location of that zone
- write to a zone
- zone append
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051510.177850-2-faithilikerun@gmail.com
[Fix errno propagation from handle_aiocb_zone_mgmt()
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Putting zoned/non-zoned BlockDrivers on top of each other is not
allowed.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-6-faithilikerun@gmail.com
Message-id: 20230324090605.28361-6-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and clarify that the check is about zoned
BlockDrivers.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use get_sysfs_str_val() to get the string value of device
zoned model. Then get_sysfs_zoned_model() can convert it to
BlockZoneModel type of QEMU.
Use get_sysfs_long_val() to get the long value of zoned device
information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-3-faithilikerun@gmail.com
Message-id: 20230324090605.28361-3-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-2-faithilikerun@gmail.com
Message-id: 20230324090605.28361-2-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add separate macro EXTIOI_CPUS for extioi interrupt controller, extioi
only supports 4 cpu. And set macro LOONGARCH_MAX_CPUS as 256 so that
loongarch virt machine supports more cpus.
Interrupts from external devices can only be routed cpu 0-3 because
of extioi limits, cpu internal interrupt such as timer/ipi can be
triggered on all cpus.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-3-gaosong@loongson.cn>
ipi is used to communicate between cpus, this patch modified
loongarch ipi device as percpu device, so that there are
2 MemoryRegions with ipi device, rather than 2*cpus
MemoryRegions, which may be large than QDEV_MAX_MMIO if
more cpus are added on loongarch virt machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-2-gaosong@loongson.cn>
Function that convert a number of target_pages into its size in MiB.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230511141208.17779-2-quintela@redhat.com>
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses have now been expunged.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expose qemu_cpu_list_lock globally so that we can use
WITH_QEMU_LOCK_GUARD and QEMU_LOCK_GUARD to simplify a few code paths
now and in future.
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-2-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-83-richard.henderson@linaro.org>
Use uint64_t for the pc, and size_t for the size.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-81-richard.henderson@linaro.org>
colo_checkpoint_notify() is mostly used in colo.c. Outside we use it
once when x-checkpoint-delay migration parameter is set. So, let's
simplify the external API to only that function - notify COLO that
parameter was set. This make external API more robust and hides
implementation details from external callers. Also this helps us to
make COLO module optional in further patch (i.e. we are going to add
possibility not build the COLO module).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_refresh_limits() need to hold a reader lock for the graph because
it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-21-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_recurse_can_replace() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-20-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_query_block_graph_info() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-19-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of amend
callbacks in BlockDriver need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-17-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_debug_event() need to hold a reader lock for the graph.
Unfortunately we cannot use a co_wrapper_bdrv_rdlock (i.e. make the
coroutine wrapper a no_coroutine_fn), because the function is called
(using the BLKDBG_EVENT macro) by mixed functions that run both in
coroutine and non-coroutine context (for example many of the functions
in qcow2-cluster.c and qcow2-refcount.c).
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-16-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_info() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-15-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_allocated_file_size() need to hold a reader lock for the
graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-14-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drivers were a bit confused about whether .bdrv_open can run in a
coroutine and whether or not it holds a graph lock.
It cannot keep a graph lock from the caller across the whole function
because it both changes the graph (requires a writer lock) and does I/O
(requires a reader lock). Therefore, it should take these locks
internally as needed.
The functions used to be called in coroutine context during image
creation. This was buggy for other reasons, and as of commit 32192301,
all block drivers go through no_co_wrappers. So it is not called in
coroutine context any more.
Fix qcow2 and qed to work with the correct assumptions: The graph lock
needs to be taken internally instead of just assuming it's already
there, and the coroutine path is dead code that can be removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-9-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
GRAPH_RDLOCK_GUARD() and GRAPH_RDLOCK_GUARD_MAINLOOP() only take a
reader lock for the graph, so the correct annotation for them to use is
TSA_ASSERT_SHARED rather than TSA_ASSERT.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-8-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For some functions, it is part of their interface to be called without
holding the graph lock. Add a new macro to document this.
The macro expands to TSA_EXCLUDES(), which is a relatively weak check
because it passes in cases where the compiler just doesn't know if the
lock is held. Function pointers can't be checked at all. Therefore, its
primary purpose is documentation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions must not be called in coroutine context, because they
need write access to the graph.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Migration code can call bdrv_activate() in coroutine context, whereas
other callers call it outside of coroutines. As it calls other code that
is not supposed to run in coroutines, standardise on running outside of
coroutines.
This adds a no_co_wrapper to switch to the main loop before calling
bdrv_activate().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need for the AioContext lock in aio_wait_bh_oneshot().
It's easy to remove the lock from existing callers and then switch from
AIO_WAIT_WHILE() to AIO_WAIT_WHILE_UNLOCKED() in aio_wait_bh_oneshot().
Document that the AioContext lock should not be held across
aio_wait_bh_oneshot(). Holding a lock across aio_poll() can cause
deadlock so we don't want callers to do that.
This is a step towards getting rid of the AioContext lock.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230404153307.458883-1-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After the recent introduction of many new coroutine callbacks,
a couple calls from non-coroutine_fn to coroutine_fn have sneaked
in; fix them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230406101752.242125-1-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit cf60ccc330 ("cutils: Introduce bundle mechanism") abandoned
compatibility with Windows older than 8 - we should reflect this
in our _WIN32_WINNT and set it to the value that corresponds to
Windows 8.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230504081351.125140-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the old type was correct in the ideal sense, some ABIs require
the argument to be zero-extended. Using uint32_t for all such values
is a decent compromise.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the old interfaces with the implicit MemOp argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230502135741.1158035-10-richard.henderson@linaro.org>
Add signature and signature-granularity properties in spike to specify the target
signatrue file and the line size for signature data.
Recgonize the signature section between begin_signature and end_signature symbols
when loading elf of ACT tests. Then dump signature data in signature section just
before the ACT tests exit.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230405095720.75848-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At least RISC-V has the need to be able to perform a read
using execute permissions, outside of translation.
Add helpers to facilitate this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-9-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-9-richard.henderson@linaro.org>
Clang 14, with --enable-tcg-interpreter errors with
include/qemu/int128.h:487:16: error: alignment of field 'i' (128 bits)
does not match the alignment of the first field in transparent union;
transparent_union attribute ignored [-Werror,-Wignored-attributes]
__int128_t i;
^
include/qemu/int128.h:486:12: note: alignment of first field is 64 bits
Int128 s;
^
1 error generated.
By placing the __uint128_t member first, this is avoided.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230501204625.277361-1-richard.henderson@linaro.org>
Add tcg expander and helper functions for rotate right
vector with scalar operand.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Message-Id: <20230428144757.57530-10-lawrence.hunter@codethink.co.uk>
[rth: Split out of larger patch; mask rotation count.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add tcg expander and helper functions for and-compliment
vector with scalar operand.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Message-Id: <20230428144757.57530-10-lawrence.hunter@codethink.co.uk>
[rth: Split out of larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is for use in the RISC-V vclz and vctz instructions (implemented in
proceeding commit).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230428144757.57530-11-lawrence.hunter@codethink.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rotates have been fixed up to only allow for reasonable rotate amounts
(ie, no rotates >7 on an 8b value etc.) This fixes a problem with riscv
vector rotate instructions.
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230428144757.57530-9-lawrence.hunter@codethink.co.uk>
[rth: Mask shifts in both directions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The arm boot.c code includes a utility function write_bootloader()
which assists in writing a boot-code fragment into guest memory,
including handling endianness and fixing it up with entry point
addresses and similar things. This is useful not just for the boot.c
code but also in board model code, so rename it to
arm_write_bootloader() and make it globally visible.
Since we are making it public, make its API a little neater: move the
AddressSpace* argument to be next to the hwaddr argument, and allow
the fixupcontext array to be const, since we never modify it in this
function.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org
[PMM: Split out from another patch by Cédric, added doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does do is force TCG emulation to put one guest instruction in each
TB, which can be useful in some situations.
Create a new HMP command 'one-insn-per-tb', so we can document that
'singlestep' is just a deprecated synonym for it, and eventually
perhaps drop it.
We aren't obliged to do deprecate-and-drop for HMP commands,
but it's easy enough to do so, so we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-9-peter.maydell@linaro.org
The only place left that looks at the old 'singlestep' global
variable is the TCG curr_cflags() function. Replace the old global
with a new 'one_insn_per_tb' which is defined in tcg-all.c and
declared in accel/tcg/internal.h. This keeps it restricted to the
TCG code, unlike 'singlestep' which was available to every file in
the system and defined in multiple different places for softmmu vs
linux-user vs bsd-user.
While we're making this change, use qatomic_read() and qatomic_set()
on the accesses to the new global, because TCG will read it without
holding a lock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-4-peter.maydell@linaro.org
This query copies the kernel command line into the message buffer. It
was previously stubbed out to return empty, this commit makes it reflect
the arguments specified with `-append`.
I observed the following peculiarities on my Pi 3B+:
- If the buffer is shorter than the string, the response header gives
the full length, but no data is actually copied.
- No NUL terminator is added: even if the buffer is long enough to fit
one, the buffer's original contents are preserved past the string's
end.
- The VC firmware adds the following extra parameters beside the
user-supplied ones (via /boot/cmdline.txt): `video`, `vc_mem.mem_base`
and `vc_mem.mem_size`. This is currently not implemented in qemu.
Signed-off-by: Daniel Bertalan <dani@danielbertalan.dev>
Message-id: 20230425103250.56653-1-dani@danielbertalan.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about NUL and short-buffer behaviour]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
=vxou
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Fix compilation issues under Debian 10
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
# a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
# Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
# E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
# nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
# JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
# =vxou
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 29 Apr 2023 01:19:14 PM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
cpus-common: stop using mb_set/mb_read
async: Suppress GCC13 false positive in aio_bh_poll()
tests: vhost-user-test: release mutex on protocol violation
Update linux headers to v6.3rc5
update-linux-headers.sh: Add missing kernel headers.
Fix libvhost-user.c compilation.
target/i386: Add support for PREFETCHIT0/1 in CPUID enumeration
target/i386: Add support for AVX-NE-CONVERT in CPUID enumeration
target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration
target/i386: Add support for AVX-IFMA in CPUID enumeration
target/i386: Add support for AMX-FP16 in CPUID enumeration
target/i386: Add support for CMPCCXADD in CPUID enumeration
i386/cpu: Update how the EBX register of CPUID 0x8000001F is set
i386/sev: Update checks and information related to reduced-phys-bits
qemu-options.hx: Update the reduced-phys-bits documentation
qapi, i386/sev: Change the reduced-phys-bits value from 5 to 1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Devices can pass their MemoryReentrancyGuard (from their DeviceState),
when creating new BHes. Then, the async API will toggle the guard
before/after calling the BH call-back. This prevents bh->mmio reentrancy
issues.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-3-alxndr@bu.edu>
[thuth: Fix "line over 90 characters" checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit
-----BEGIN PGP SIGNATURE-----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=mpYX
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRH0b0RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y0yw/6A/vzA4TGgFUP3WIvH/sQri4/V3gyR+PT
# u3hOQUCYZ99nioTpKV91TSuUPuU/Mdspy/0NKM+K92yIXqxa9172A2zLOsGOu21l
# qKpse+nBf1zqEgB8YzUHyCBdetPz916C/f9RS26SNUCW85GCHYGHA3u7nKvWLMyV
# oKIoTlA8QOglOuEKlRoYh7hCFm7ET51NOSEftm8GsYbsW/I2Vzl8a1SHN1lHufjd
# We3+898zUrmFqNMp6Rjdhn+yZmmoGzoZqV4YQi83z7xjiv+Ms4VHVVW7X8d20xRX
# 5BLFiLHAuZ/1d26HyVhgBUr7KHyf94odocz8BylWKXGl5SXMCZun1Td1vgVKlGK+
# GRxzB2cWGWqzC2UmqSTc0Z0aIWbXukKwvcX76uBKsQZ+kB2A7jFobxHiaoQEDJ8B
# WRNEMH2+CqCAu9rsrNRinnJKhT2nXcr9F9YfwRIlagdAePGWin+EUW8huf14dDBm
# Z2Y34aKW4RQibF8xirMHeRBbOLmcq2VpKLKwNfBHUDgZB8iuD7bLn4n9nwWXMG1w
# zgNsTybkv46vLPamTpEaUoNTHfuRDTAuE7Z7lkcc7jF41Z0V1DC/DCCWcL/0LvhP
# GIxFdkYug3hetdF2U/OZhUoEfxvkqcuBnrr55LFzqheKEllQpPwPpt7UF0aH8bg3
# i/YpjHsf3xU=
# =mpYX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 02:12:29 PM BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (25 commits)
block/monitor: Fix crash when executing HMP commit
vmdk: make vmdk_is_cid_valid a coroutine_fn
qcow2: mark various functions as coroutine_fn and GRAPH_RDLOCK
tests: mark more coroutine_fns
qemu-pr-helper: mark more coroutine_fns
9pfs: mark more coroutine_fns
nbd: mark more coroutine_fns, do not use co_wrappers
mirror: make mirror_flush a coroutine_fn, do not use co_wrappers
blkdebug: add missing coroutine_fn annotation
vvfat: mark various functions as coroutine_fn
thread-pool: avoid passing the pool parameter every time
thread-pool: use ThreadPool from the running thread
io_uring: use LuringState from the running thread
linux-aio: use LinuxAioState from the running thread
block: add missing coroutine_fn to bdrv_sum_allocated_file_size()
include/block: fixup typos
monitor: convert monitor_cleanup() to AIO_WAIT_WHILE_UNLOCKED()
hmp: convert handle_hmp_command() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_drain_all_begin() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_graph_wrlock() to AIO_WAIT_WHILE_UNLOCKED()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_get_current_aio_context() where possible, since we always
submit work to the current thread anyways.
We want to also be sure that the thread submitting the work is
the same as the one processing the pool, to avoid adding
synchronization to the pool list.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-4-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LuringState.
In order to prevent mistakes from the caller side, avoid passing LuringState
in luring_io_{plug/unplug} and luring_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-3-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LinuxAioState.
In order to prevent mistakes from the caller side, avoid passing LinuxAioState
in laio_io_{plug/unplug} and laio_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-2-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixup a few minor typos
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20230313003744.55476-1-wilfred.mallawa@opensource.wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mostly just fixes, cleanups all over the place.
Some optimizations.
More control over slot_reserved_mask.
More feature bits supported for SVQ.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRHQvAPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpQc0H/RD+RXy7IAnmhkdCyjj0hM8pftPTwCJfrSCW
DLHP4c5jiKO5ngUoAv3YJdM77TBCXlJn6gceeKBrzhGUTtJ7dTLC+Udeq/jW43EF
/E2ldLLbTNFyUqW8yX7D+EVio7Jy4zXTHpczKCF5vO7MaVWS/b3QdCpmjXpEHLNb
janv24vQHHgmRwK96uIdIauJJT8aqYW0arn1po8anxuFS8ok9Tf8LTEF5uBHokJP
MriTwMaqMgRK+4rzh+b6wc7QC5GqIr44gFrsfFYuNOUY0+BizvGvUAtMt+B/XZwt
OF4RSShUh2bhsQoYwgvShfEsR/vWwOl3yMAhcsB+wMgMzMG8MUQ=
=e8DF
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
Mostly just fixes, cleanups all over the place.
Some optimizations.
More control over slot_reserved_mask.
More feature bits supported for SVQ.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRHQvAPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpQc0H/RD+RXy7IAnmhkdCyjj0hM8pftPTwCJfrSCW
# DLHP4c5jiKO5ngUoAv3YJdM77TBCXlJn6gceeKBrzhGUTtJ7dTLC+Udeq/jW43EF
# /E2ldLLbTNFyUqW8yX7D+EVio7Jy4zXTHpczKCF5vO7MaVWS/b3QdCpmjXpEHLNb
# janv24vQHHgmRwK96uIdIauJJT8aqYW0arn1po8anxuFS8ok9Tf8LTEF5uBHokJP
# MriTwMaqMgRK+4rzh+b6wc7QC5GqIr44gFrsfFYuNOUY0+BizvGvUAtMt+B/XZwt
# OF4RSShUh2bhsQoYwgvShfEsR/vWwOl3yMAhcsB+wMgMzMG8MUQ=
# =e8DF
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 04:03:12 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (31 commits)
hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEV
hw/pci-bridge: pci_expander_bridge fix type in pxb_cxl_dev_reset()
docs/specs: Convert pci-testdev.txt to rst
docs/specs: Convert pci-serial.txt to rst
docs/specs/pci-ids: Convert from txt to rST
acpi: pcihp: allow repeating hot-unplug requests
virtio: i2c: Check notifier helpers for VIRTIO_CONFIG_IRQ_IDX
docs: Remove obsolete descriptions of SR-IOV support
intel_iommu: refine iotlb hash calculation
docs/cxl: Fix sentence
MAINTAINERS: Add Eugenio Pérez as vhost-shadow-virtqueue reviewer
tests: bios-tables-test: replace memset with initializer
hw/acpi: limit warning on acpi table size to pc machines older than version 2.3
Add my old and new work email mapping and use work email to support acpi
vhost-user-blk-server: notify client about disk resize
pci: avoid accessing slot_reserved_mask directly outside of pci.c
hw: Add compat machines for 8.1
hw/i386/amd_iommu: Factor amdvi_pci_realize out of amdvi_sysbus_realize
hw/i386/amd_iommu: Set PCI static/const fields via PCIDeviceClass
hw/i386/amd_iommu: Move capab_offset from AMDVIState to AMDVIPCIState
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Previously, PXB_CXL_DEVICE, PXB_PCIE_DEVICE and PXB_DEVICE all
have PCI_DEVICE as their direct parent but share a common state
struct PXBDev. convert_to_pxb() is used to get the PXBDev
instance from which ever of these types it is called on.
This patch switches to an explicit hierarchy based on shared
functionality. To allow use of OBJECT_DECLARE_SIMPLE_TYPE()
whilst minimizing code changes, all types are renamed to have
the postfix _DEV rather than _DEVICE. The new heirarchy
has PXB_CXL_DEV with parent PXB_PCIE_DEV which in turn
has parent PXB_DEV which continues to have parent PCI_DEVICE.
This allows simple use of PXB_DEV() etc rather than a custom function
+ removal of duplicated properties and moving the CXL specific
elements out of struct PXBDev.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230420142750.6950-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx machine versions 2.3 and newer supports dynamic ram
resizing. See commit a1666142db ("acpi-build: make ROMs RAM blocks resizeable") .
Currently supported all q35 machine types (versions 2.4 and newer) supports
resizable RAM/ROM blocks.Therefore the warning generated when the ACPI table
size exceeds a pre-defined value does not apply to those machine versions.
Add a check limiting the warning message to only those machines that does not
support expandable ram blocks (that is, i440fx machines with version 2.2
and older).
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230329045726.14028-1-anisinha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is only used there, so we can make it static.
Once there, remove spice.h that it is not used.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
fix David Edmonson ui/qemu-spice.h unintended removal
This new helper fetches file system type for a fd. Only Linux is
implemented so far. Currently only tmpfs and hugetlbfs are defined,
but it can grow as needed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
=ML27
-----END PGP SIGNATURE-----
Merge tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2023/04/20 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
# QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
# crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
# t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
# GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
# e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
# 1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
# =ML27
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm:
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
tests/avocado/aspeed: Add TPM TIS I2C test
tpm: Add support for TPM device over I2C bus
tpm: Extend common APIs to support TPM TIS I2C
docs: Add support for TPM devices over I2C bus
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
+SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
dwQ9LRDFNsA=
=8ZFL
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu into staging
* Compat machines for version 8.1
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
# doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
# 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
# dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
# UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
# R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
# dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
# dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
# gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
# 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
# +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
# dwQ9LRDFNsA=
# =8ZFL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits)
tests/vm/freebsd: Update to FreeBSD 13.2
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
MAINTAINERS: Add Juan Quintela to developer guides review
cpu: Remove parameter of list_cpus()
hw/core: Move numa.c into the target independent source set
softmmu: Move dirtylimit.c into the target independent source set
hw/display: Compile vga.c as target-independent code
softmmu: Make qtest.c target independent
include/exec: Provide the tswap() functions for target independent code, too
softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c
hw/char: Move two more files from specific_ss to softmmu_ss
target/i386: Set family/model/stepping of the "max" CPU according to LM bit
tests/migration: Only run auto_converge in slow mode
travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job
travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job
chardev: Allow setting file chardev input file on the command line
qtest: Don't assert on "-qtest chardev:myid"
test: Fix test-crypto-secret when compiling without keyring support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch provides accessor functions as replacements for direct
access to slot_reserved_mask according to the comment at the top
of include/hw/pci/pci_bus.h which advises that data structures for
PCIBus should not be directly accessed but instead be accessed using
accessor functions in pci.h.
Three accessor functions can conveniently replace all direct accesses
of slot_reserved_mask. With this patch, the new accessor functions are
used in hw/sparc64/sun4u.c and hw/xen/xen_pt.c and pci_bus.h is removed
from the included header files of the same two files.
No functional change intended.
Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <b1b7f134883cbc83e455abbe5ee225c71aa0e8d0.1678888385.git.brchuckz@aol.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [sun4u]
Add 8.1 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20230314173009.152667-1-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Optimize the virtio-balloon feature on the ARM platform by adding
a variable to keep track of the current hot-plugged pc-dimm size,
instead of traversing the virtual machine's memory modules to count
the current RAM size during the balloon inflation or deflation
process. This variable can be updated only when plugging or unplugging
the device, which will result in an increase of approximately 60%
efficiency of balloon process on the ARM platform.
We tested the total amount of time required for the balloon inflation process on ARM:
inflate the balloon to 64GB of a 128GB guest under stress.
Before: 102 seconds
After: 42 seconds
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Ming Yang yangming73@huawei.com
Message-Id: <e13bc78f96774bfab4576814c293aa52@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
When a virtqueue size is changed by the guest via
virtio_queue_set_num(), its region cache is not automatically updated.
If the size was increased, this could lead to accessing the cache out
of bounds. For example, in vring_get_used_event():
static inline uint16_t vring_get_used_event(VirtQueue *vq)
{
return vring_avail_ring(vq, vq->vring.num);
}
static inline uint16_t vring_avail_ring(VirtQueue *vq, int i)
{
VRingMemoryRegionCaches *caches = vring_get_region_caches(vq);
hwaddr pa = offsetof(VRingAvail, ring[i]);
if (!caches) {
return 0;
}
return virtio_lduw_phys_cached(vq->vdev, &caches->avail, pa);
}
vq->vring.num will be greater than caches->avail.len, which will
trigger a failed assertion down the call path of
virtio_lduw_phys_cached().
Fix this by calling virtio_init_region_cache() after
virtio_queue_set_num() if we are not already calling
virtio_queue_set_rings(). In the legacy path this is already done by
virtio_queue_update_rings().
Signed-off-by: Carlos López <clopez@suse.de>
Message-Id: <20230317002749.27379-1-clopez@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-2-stefanb@linux.ibm.com
Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.
This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
provide this string on command line.
Testing:
TPM I2C device module is tested using SWTPM (software based TPM
package). Qemu uses the rainier machine and is connected to swtpm over
the socket interface.
The command to start swtpm is as follows:
$ swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--tpm2 --log level=100
The command to start qemu is as follows:
$ qemu-system-arm -M rainier-bmc -nographic \
-kernel ${IMAGEPATH}/fitImage-linux.bin \
-dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
-initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
-drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com
Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices.
This commit includes changes for the common code.
- Added support for the new checksum registers which are required for
the I2C support. The checksum calculation is handled in the qemu
common code.
- Added wrapper function for read and write data so that I2C code can
call it without MMIO interface.
The TPM TIS I2C spec describes in the table in section "Interface Locality
Usage per Register" that the TPM_INT_ENABLE and TPM_INT_STATUS registers
must be writable for any locality even if the locality is not the active
locality. Therefore, remove the checks whether the writing locality is the
active locality for these registers.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-3-ninadpalsule@us.ibm.com
Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-5-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-3-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SOC on i.MX6UL and i.MX7 has 2 Ethernet interfaces. The PHY on each may
be connected to separate MDIO busses, or both may be connected on the same
MDIO bus using different PHY addresses. Commit 461c51ad42 ("Add a phy-num
property to the i.MX FEC emulator") added support for specifying PHY
addresses, but it did not provide support for linking the second PHY on
a given MDIO bus to the other Ethernet interface.
To be able to support two PHY instances on a single MDIO bus, two properties
are needed: First, there needs to be a flag indicating if the MDIO bus on
a given Ethernet interface is connected. If not, attempts to read from this
bus must always return 0xffff. Implement this property as phy-connected.
Second, if the MDIO bus on an interface is active, it needs a link to the
consumer interface to be able to provide PHY access for it. Implement this
property as phy-consumer.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-2-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-2-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "optarg" parameter is completely unused, so let's drop it.
Message-Id: <20230419124831.678079-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In some cases of target independent code, it would be useful to have access
to the functions that swap endianess in case it differs between guest and
host. Thus re-implement the tswapXX() functions in a new header that can be
included separately. The check whether the swapping is needed continues to
be done at compile-time for target specific code, while it is done at
run-time in target-independent code.
Message-Id: <20230411183418.1640500-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ideally, qtest.c should be independent from target specific code, so
we only have to compile it once for all targets. Thus start improving
the situation by moving the pseries related code to hw/ppc/spapr_rtas.c
instead and allow target code to register a callback handler for such
target specific commands.
Message-Id: <20230411183418.1640500-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds WDT to Allwinner-H3 and Orangepi-PC.
WDT is added as an overlay to the Timer module memory area.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-4-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-A10 and Cubieboard.
WDT is added as an overlay to the Timer module memory map.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-3-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds basic support for Allwinner WDT.
Both sun4i and sun6i variants are supported.
However, interrupt generation is not supported, so WDT can be used only to trigger system reset.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-2-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There should be no paths from a coroutine_fn to aio_poll, however in
practice coroutine_mixed_fn will call aio_poll in the !qemu_in_coroutine()
path. By marking mixed functions, we can track accurately the call paths
that execute entirely in coroutine context, and find more missing
coroutine_fn markers. This results in more accurate checks that
coroutine code does not end up blocking.
If the marking were extended transitively to all functions that call
these ones, static analysis could be done much more efficiently.
However, this is a start and makes it possible to use vrc's path-based
searches to find potential bugs where coroutine_fns call blocking functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There should be no paths from a coroutine_fn to aio_poll, however in
practice coroutine_mixed_fn will call aio_poll in the !qemu_in_coroutine()
path. By marking mixed functions, we can track accurately the call paths
that execute entirely in coroutine context, and find more missing
coroutine_fn markers. This results in more accurate checks that
coroutine code does not end up blocking.
If the marking were extended transitively to all functions that call
these ones, static analysis could be done much more efficiently.
However, this is a start and makes it possible to use vrc's path-based
searches to find potential bugs where coroutine_fns call blocking functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There should be no paths from a coroutine_fn to aio_poll, however in
practice coroutine_mixed_fn will call aio_poll in the !qemu_in_coroutine()
path. By marking mixed functions, we can track accurately the call paths
that execute entirely in coroutine context, and find more missing
coroutine_fn markers. This results in more accurate checks that
coroutine code does not end up blocking.
If the marking were extended transitively to all functions that call
these ones, static analysis could be done much more efficiently.
However, this is a start and makes it possible to use vrc's path-based
searches to find potential bugs where coroutine_fns call blocking functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migrate rtc_ref (which only needs to be 32-bit because it is summed to
a 32-bit register), which requires bumping the migration version.
The HPPA machine does not have versioned machine types so it is okay
to block migration to old versions of QEMU.
While at it, drop the write-only field rtc from LasiState.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The introduction of the graph lock is causing blk_get_geometry, a hot function
used in the I/O path, to create a coroutine. However, the only part that really
needs to run in coroutine context is the call to bdrv_co_refresh_total_sectors,
which in turn only happens in the rare case of host CD-ROM devices.
So, write by hand the three wrappers on the path from blk_co_get_geometry to
bdrv_co_refresh_total_sectors, so that the coroutine wrapper is only created
if bdrv_nb_sectors actually calls bdrv_refresh_total_sectors.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_get_geometry is only used in blk_co_get_geometry. Inline it in
there, to reduce the number of wrappers for bs->total_sectors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-7-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fill in the field in BlockLimits directly for host devices, and
copy it from there for the raw format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-5-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At the protocol level, has_variable_length only needs to be true in the
very special case of host CD-ROM drives, so that they do not need an
explicit monitor command to read the new size when a disc is loaded
in the tray.
However, at the format level has_variable_length has to be true for all
raw blockdevs and for all filters, even though in practice the length
depends on the underlying file and thus will not change except in the
case of host CD-ROM drives.
As a first step towards computing an accurate value of has_variable_length,
add the value into the BlockLimits structure and initialize the field
from the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-2-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
CPU watchpoints can be use by non-TCG accelerators.
KVM uses them:
$ git grep CPUWatchpoint|fgrep kvm
target/arm/kvm64.c:1558: CPUWatchpoint *wp = find_hw_watchpoint(cs, debug_exit->far);
target/i386/kvm/kvm.c:5216:static CPUWatchpoint hw_watchpoint;
target/ppc/kvm.c:443:static CPUWatchpoint hw_watchpoint;
target/s390x/kvm/kvm.c:139:static CPUWatchpoint hw_watchpoint;
See for example commit e4482ab7e3 ("target-arm: kvm - add support
for HW assisted debug"):
This adds basic support for HW assisted debug. The ioctl interface
to KVM allows us to pass an implementation defined number of break
and watch point registers. [...]
This partially reverts commit 2609ec2868.
Fixes: 2609ec2868 ("softmmu: Extract watchpoint API from physmem.c")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230328173117.15226-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both cpu_check_watchpoint() and cpu_watchpoint_address_matches()
are specific to TCG system emulation. Declare them in "tcg-cpu-ops.h"
to be sure accessing them from non-TCG code is a compilation error.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230328173117.15226-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the semantics to be the last byte of the guest va, rather
than the following byte. This avoids some overflow conditions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1528
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
blk_get_geometry() eventually calls bdrv_nb_sectors(), which is a
co_wrapper_mixed_bdrv_rdlock. This means that when it is called from
coroutine context, it already assume to have the graph locked.
However, virtio_blk_sect_range_ok() in block/export/virtio-blk-handler.c
(used by vhost-user-blk and VDUSE exports) runs in a coroutine, but
doesn't take the graph lock - blk_*() functions are generally expected
to do that internally. This causes an assertion failure when accessing
an export for the first time if it runs in an iothread.
This is an example of the crash:
$ ./storage-daemon/qemu-storage-daemon --object iothread,id=th0 --blockdev file,filename=/home/kwolf/images/hd.img,node-name=disk --export vhost-user-blk,addr.type=unix,addr.path=/tmp/vhost.sock,node-name=disk,id=exp0,iothread=th0
qemu-storage-daemon: ../block/graph-lock.c:268: void assert_bdrv_graph_readable(void): Assertion `qemu_in_main_thread() || reader_count()' failed.
(gdb) bt
#0 0x00007ffff6eafe5c in __pthread_kill_implementation () from /lib64/libc.so.6
#1 0x00007ffff6e5fa76 in raise () from /lib64/libc.so.6
#2 0x00007ffff6e497fc in abort () from /lib64/libc.so.6
#3 0x00007ffff6e4971b in __assert_fail_base.cold () from /lib64/libc.so.6
#4 0x00007ffff6e58656 in __assert_fail () from /lib64/libc.so.6
#5 0x00005555556337a3 in assert_bdrv_graph_readable () at ../block/graph-lock.c:268
#6 0x00005555555fd5a2 in bdrv_co_nb_sectors (bs=0x5555564c5ef0) at ../block.c:5847
#7 0x00005555555ee949 in bdrv_nb_sectors (bs=0x5555564c5ef0) at block/block-gen.c:256
#8 0x00005555555fd6b9 in bdrv_get_geometry (bs=0x5555564c5ef0, nb_sectors_ptr=0x7fffef7fedd0) at ../block.c:5884
#9 0x000055555562ad6d in blk_get_geometry (blk=0x5555564cb200, nb_sectors_ptr=0x7fffef7fedd0) at ../block/block-backend.c:1624
#10 0x00005555555ddb74 in virtio_blk_sect_range_ok (blk=0x5555564cb200, block_size=512, sector=0, size=512) at ../block/export/virtio-blk-handler.c:44
#11 0x00005555555dd80d in virtio_blk_process_req (handler=0x5555564cbb98, in_iov=0x7fffe8003830, out_iov=0x7fffe8003860, in_num=1, out_num=0) at ../block/export/virtio-blk-handler.c:189
#12 0x00005555555dd546 in vu_blk_virtio_process_req (opaque=0x7fffe8003800) at ../block/export/vhost-user-blk-server.c:66
#13 0x00005555557bf4a1 in coroutine_trampoline (i0=-402635264, i1=32767) at ../util/coroutine-ucontext.c:177
#14 0x00007ffff6e75c20 in ?? () from /lib64/libc.so.6
#15 0x00007fffefffa870 in ?? ()
#16 0x0000000000000000 in ?? ()
Fix this by creating a new blk_co_get_geometry() that takes the lock,
and changing blk_get_geometry() to be a co_wrapper_mixed around it.
To make the resulting code cleaner, virtio-blk-handler.c can directly
call the coroutine version now (though that wouldn't be necessary for
fixing the bug, taking the lock in blk_co_get_geometry() is what fixes
it).
Fixes: 8ab8140a04
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230327113959.60071-1-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bring the block files in line with the QEMU coding style, with spaces
for indentation. This patch partially resolves the issue 371.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/371
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230314095001.13801-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Bring the block files in line with the QEMU coding style, with spaces
for indentation. This patch partially resolves the issue 371.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/371
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315043229.62100-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we've broken the include loop with cpu.h,
we can bring this inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-8-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-18-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
The usage in hw/core/cpu.h only requires QEMU_PLUGIN_EV_MAX.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-7-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-17-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This had been pulled in from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-6-richard.henderson@linaro.org>
[AJB: also syscall-trace.h]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-16-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This macro is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-4-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-14-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Some API documentation was missed, rectify that.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1497
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-7-alex.bennee@linaro.org>
Close the given file descriptor, but returns the underlying SOCKET.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230320133643.1618437-2-marcandre.lureau@redhat.com>
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes the Windows build under msys2 using GCC 12 which fails with the following
error:
[184/579] Compiling C++ object qga/vss-win32/qga-vss.dll.p/install.cpp.obj
FAILED: qga/vss-win32/qga-vss.dll.p/install.cpp.obj
"c++" "-m64" "-mcx16" "-Iqga/vss-win32/qga-vss.dll.p" "-Iqga/vss-win32" "-I../src/qga/vss-win32" "-I." "-Iqapi" "-Itrace" "-Iui" "-Iui/shader" "-IC:/msys64/mingw64/include/glib-2.0" "-IC:/msys64/mingw64/lib/glib-2.0/include" "-fdiagnostics-color=auto" "-Wall" "-Winvalid-pch" "-Wnon-virtual-dtor" "-Werror" "-std=gnu++11" "-g" "-iquote" "." "-iquote" "C:/msys64/home/shentey/Projects/qemu/src" "-iquote" "C:/msys64/home/shentey/Projects/qemu/src/include" "-iquote" "C:/msys64/home/shentey/Projects/qemu/src/tcg/i386" "-D__STDC_LIMIT_MACROS" "-D__STDC_CONSTANT_MACROS" "-D__STDC_FORMAT_MACROS" "-fno-pie" "-no-pie" "-D_GNU_SOURCE" "-D_FILE_OFFSET_BITS=64" "-D_LARGEFILE_SOURCE" "-fno-strict-aliasing" "-fno-common" "-fwrapv" "-Wundef" "-Wwrite-strings" "-Wtype-limits" "-Wformat-security" "-Wformat-y2k" "-Winit-self" "-Wignored-qualifiers" "-Wempty-body" "-Wendif-labels" "-Wexpansion-to-defined" "-Wimplicit-fallthrough=2" "-Wmissing-format-attribute" "-Wno-missing-include-dirs" "-Wno-shift-negative-value" "-Wno-psabi" "-fstack-protector-strong" "-Wno-unknown-pragmas" "-Wno-delete-non-virtual-dtor" "-Wno-non-virtual-dtor" -MD -MQ qga/vss-win32/qga-vss.dll.p/install.cpp.obj -MF "qga/vss-win32/qga-vss.dll.p/install.cpp.obj.d" -o qga/vss-win32/qga-vss.dll.p/install.cpp.obj "-c" ../src/qga/vss-win32/install.cpp
In file included from C:/msys64/mingw64/lib/glib-2.0/include/glibconfig.h:9,
from C:/msys64/mingw64/include/glib-2.0/glib/gtypes.h:34,
from C:/msys64/mingw64/include/glib-2.0/glib/galloca.h:34,
from C:/msys64/mingw64/include/glib-2.0/glib.h:32,
from C:/msys64/home/shentey/Projects/qemu/src/include/glib-compat.h:32,
from C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:144,
from ../src/qga/vss-win32/install.cpp:13:
C:/msys64/mingw64/include/glib-2.0/glib/gmacros.h:1075:21: error: standard attributes in middle of decl-specifiers
1075 | # define G_NORETURN [[noreturn]]
| ^
C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:240:8: note: in expansion of macro 'G_NORETURN'
240 | extern G_NORETURN
| ^~~~~~~~~~
C:/msys64/mingw64/include/glib-2.0/glib/gmacros.h:1075:21: note: standard attributes must precede the decl-specifiers to apply to the declaration, or follow them to apply to the type
1075 | # define G_NORETURN [[noreturn]]
| ^
C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:240:8: note: in expansion of macro 'G_NORETURN'
240 | extern G_NORETURN
| ^~~~~~~~~~
C:/msys64/mingw64/include/glib-2.0/glib/gmacros.h:1075:21: error: attribute ignored [-Werror=attributes]
1075 | # define G_NORETURN [[noreturn]]
| ^
C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:240:8: note: in expansion of macro 'G_NORETURN'
240 | extern G_NORETURN
| ^~~~~~~~~~
C:/msys64/mingw64/include/glib-2.0/glib/gmacros.h:1075:21: note: an attribute that appertains to a type-specifier is ignored
1075 | # define G_NORETURN [[noreturn]]
| ^
C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:240:8: note: in expansion of macro 'G_NORETURN'
240 | extern G_NORETURN
| ^~~~~~~~~~
cc1plus.exe: all warnings being treated as errors
Apparently it also fixes the compilation with Clang 15 (see
https://gitlab.com/qemu-project/qemu/-/issues/1541 ).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1541
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230318185931.181659-1-shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
During build the kernel-doc script complains about the following issue:
src/docs/../include/exec/memory.h:1741: warning: Function parameter or member 'n' not described in 'memory_region_unmap_iommu_notifier_range'
src/docs/../include/exec/memory.h:1741: warning: Excess function parameter 'notifier' description in 'memory_region_unmap_iommu_notifier_range'
Settle on "notifier" for consistency with other memory functions.
Fixes: 7caebbf9ea
("memory: introduce memory_region_unmap_iommu_notifier_range()")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230315072552.47117-1-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Future patches will introduce EGL support on win32 (too late for 8.0
though). Having a common place for EGL initialization and error handling
will make it simpler.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Keeping the current cursor around is useful, not only for VNC, but for
other displays. Let's move it down, see the following patches for other
usages.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The naming is more conventional in QEMU code, and allows to simplify
some code by changing the API design, so it returns the input parameter,
instead of void.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The naming is more conventional in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Or else, we may randomly destroy some textures..
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These functions are no longer used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace with tcg_constant_vec*.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230306175230.7110-24-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230306175230.7110-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the tcg_temp_free_* and tcg_temp_ebb_new_* declarations
and inlines to the new header. These are private to the
implementation, and will prevent tcg_temp_free_* from creeping
back into the guest front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Manually implement a socketpair() function, using UNIX sockets and
simple peer credential checking.
QEMU doesn't make much use of socketpair, beside vhost-user which is not
available for win32 at this point. However, I intend to use it for
writing some new portable tests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230306122751.2355515-5-marcandre.lureau@redhat.com>
Use a close() wrapper instead, so that we don't need to worry about
closesocket() vs close() anymore, let's hope.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-17-marcandre.lureau@redhat.com>
The API is specific to win32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230221124802.4103554-16-marcandre.lureau@redhat.com>
Until now, a win32 SOCKET handle is often cast to an int file
descriptor, as this is what other OS use for sockets. When necessary,
QEMU eventually queries whether it's a socket with the help of
fd_is_socket(). However, there is no guarantee of conflict between the
fd and SOCKET space. Such conflict would have surprising consequences,
we shouldn't mix them.
Also, it is often forgotten that SOCKET must be closed with
closesocket(), and not close().
Instead, let's make the win32 socket wrapper functions return and take a
file descriptor, and let util/ wrappers do the fd/SOCKET conversion as
necessary. A bit of adaptation is necessary in io/ as well.
Unfortunately, we can't drop closesocket() usage, despite
_open_osfhandle() documentation claiming transfer of ownership, testing
shows bad behaviour if you forget to call closesocket().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-15-marcandre.lureau@redhat.com>
Open-code the socket registration where it's needed, to avoid
artificially used or unclear generic interface.
Furthermore, the following patches are going to make socket handling use
FD-only inside QEMU, but we need to handle win32 SOCKET from libslirp.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-12-marcandre.lureau@redhat.com>
A more explicit version of qemu_socket_select() with no events.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-8-marcandre.lureau@redhat.com>
This is a wrapper for WSAEventSelect, with Error handling. By default,
it will produce a warning, so callers don't have to be modified
now, and yet we can spot potential mis-use.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-7-marcandre.lureau@redhat.com>
This can help debugging issues or develop, when error handling is
introduced.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-6-marcandre.lureau@redhat.com>
Fortunately, qemu_fork() is no longer used since commit
a95570e3e4 ("io/command: use glib GSpawn, instead of open-coding
fork/exec"). (GSpawn uses posix_spawn() whenever possible instead)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230221124802.4103554-2-marcandre.lureau@redhat.com>
Define xtensa-specific info_is_fdpic and fill in FDPIC-specific
registers in the xtensa version of init_thread.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230205061230.544451-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
=e1yv
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
# j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
# oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
# tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
# gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
# wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
# =e1yv
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Mar 2023 14:46:14 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (72 commits)
virtio: fix reachable assertion due to stale value of cached region size
hw/virtio/vhost-user: avoid using unitialized errp
hw/pxb-cxl: Support passthrough HDM Decoders unless overridden
hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpers
hw/mem/cxl_type3: Add CXL RAS Error Injection Support.
hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use.
hw/cxl: Fix endian issues in CXL RAS capability defaults / masks
hw/mem/cxl-type3: Add AER extended capability
hw/pci-bridge/cxl_root_port: Wire up MSI
hw/pci-bridge/cxl_root_port: Wire up AER
hw/pci/aer: Add missing routing for AER errors
hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register
pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callback
pcihp: move fields enabling hotplug into AcpiPciHpState
acpi: pci: move out ACPI PCI hotplug generator from generic slot generator build_append_pci_bus_devices()
acpi: pci: move BSEL into build_append_pcihp_slots()
acpi: pci: drop BSEL usage when deciding that device isn't hotpluggable
pci: move acpi-index uniqueness check to generic PCI device code
tests: acpi: update expected blobs
tests: acpi: add non zero function device with acpi-index on non-hotpluggble bus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
igb can use this function to change its behavior depending on the
number of virtual functions currently enabled.
Signed-off-by: Gal Hammer <gal.hammer@sap.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb, a new network device emulation, will need SCTP checksum offloading.
Currently eth_get_protocols() has a bool parameter for each protocol
currently it supports, but there will be a bit too many parameters if
we add yet another protocol.
Introduce an enum type, EthL4HdrProto to represent all L4 protocols
eth_get_protocols() support with one parameter.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The values returned by eth_get_protocols() are used to perform RSS,
checksumming and segmentation. Even when a packet signals the use of the
protocols which these operations can be applied to, the headers for them
may not be present because of too short packet or fragmentation, for
example. In such a case, the operations cannot be applied safely.
Report the presence of headers instead of whether the use of the
protocols are indicated with eth_get_protocols(). This also makes
corresponding changes to the callers of eth_get_protocols() to match
with its new signature and to remove redundant checks for fragmentation.
Fixes: 75020a7021 ("Common definitions for VMWARE devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There was no proper implementation of TCP segmentation before this
change, and net_tx_pkt relied solely on IPv4 fragmentation. Not only
this is not aligned with the specification, but it also resulted in
corrupted IPv6 packets.
This is particularly problematic for the igb, a new proposed device
implementation; igb provides loopback feature for VMDq and the feature
relies on software segmentation.
Implement proper TCP segmentation in net_tx_pkt to fix such a scenario.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
filter-dump specifiees Ethernet as PCAP LinkType, which does not expect
virtio-net header. Having virtio-net header in such PCAP file breaks
PCAP unconsumable. Unfortunately currently there is no LinkType for
virtio-net so for now strip virtio-net header to convert the output to
Ethernet.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hw/net/mii.h provides common definitions for MII.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
/8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
=Al36
-----END PGP SIGNATURE-----
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
# KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
# SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
# y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
# /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
# PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
# NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
# =Al36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
