In commit 1120827fa1 we accidentally put the
"UNDEF unless FPU has double-precision support" check in
the single-precision VFM function. Put it in the dp
function where it belongs.
Fixes: 1120827fa1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617160130.3207-1-peter.maydell@linaro.org
The architecture permits FPUs which have only single-precision
support, not double-precision; Cortex-M4 and Cortex-M33 are
both like that. Add the necessary checks on the MVFR0 FPDP
field so that we UNDEF any double-precision instructions on
CPUs like this.
Note that even if FPDP==0 the insns like VMOV-to/from-gpreg,
VLDM/VSTM, VLDR/VSTR which take double precision registers
still exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190614104457.24703-3-peter.maydell@linaro.org
In several places cut and paste errors meant we were using the wrong
type for the 'arg' struct in trans_ functions called by the
decodetree decoder, because we were using the _sp version of the
struct in the _dp function. These were harmless, because the two
structs were identical and so decodetree made them typedefs of the
same underlying structure (and we'd have had a compile error if they
were not harmless), but we should clean them up anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190614104457.24703-2-peter.maydell@linaro.org
Remove the now unused TCG globals cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d.
cpu_M0 is still used by the iwmmxt code, and cpu_V0 and
cpu_V1 are used by both iwmmxt and Neon.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-13-peter.maydell@linaro.org
Remove some old constructns from NEON_2RM_VCVT_F16_F32 code:
* don't use CPU_F0s
* don't use tcg_gen_st_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-12-peter.maydell@linaro.org
Remove some old constructs from NEON_2RM_VCVT_F16_F32 code:
* don't use cpu_F0s
* don't use tcg_gen_ld_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-11-peter.maydell@linaro.org
Stop using cpu_F0s in the Neon VCVT fixed-point operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-10-peter.maydell@linaro.org
Stop using cpu_F0s for the Neon f32/s32 VCVT operations.
Since this is the last user of cpu_F0s in the Neon 2rm-op
loop, we can remove the handling code for it too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-9-peter.maydell@linaro.org
Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-8-peter.maydell@linaro.org
Stop using cpu_F0s for the NEON_2RM_VCVT[ANPM][US] ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-7-peter.maydell@linaro.org
Switch NEON_2RM_VRINT* away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-6-peter.maydell@linaro.org
Switch NEON_2RM_VABS_F away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-5-peter.maydell@linaro.org
Where Neon instructions are floating point operations, we
mostly use the old VFP utility functions like gen_vfp_abs()
which work on the TCG globals cpu_F0s and cpu_F1s. The
Neon for-each-element loop conditionally loads the inputs
into either a plain old TCG temporary for most operations
or into cpu_F0s for float operations, and similarly stores
back either cpu_F0s or the temporary.
Switch NEON_2RM_VABS_F away from using cpu_F0s, and
update neon_2rm_is_float_op() accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-4-peter.maydell@linaro.org
The AArch32 VMOV (immediate) instruction uses the same VFP encoded
immediate format we already handle in vfp_expand_imm(). Use that
function rather than hand-decoding it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-3-peter.maydell@linaro.org
We want to use vfp_expand_imm() in the AArch32 VFP decode;
move it from the a64-only header/source file to the
AArch32 one (which is always compiled even for AArch64).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-2-peter.maydell@linaro.org
Allow the DSP extension to be disabled via a CPU property for
M-profile CPUs. (A and R-profile CPUs don't have this extension
as a defined separate optional architecture extension, so
they don't need the property.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-3-peter.maydell@linaro.org
Allow VFP and neon to be disabled via a CPU property. As with
the "pmu" property, we only allow these features to be removed
from CPUs which have it by default, not added to CPUs which
don't have it.
The primary motivation here is to be able to optionally
create Cortex-M33 CPUs with no FPU, but we provide switches
for both VFP and Neon because the two interact:
* AArch64 can't have one without the other
* Some ID register fields only change if both are disabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-2-peter.maydell@linaro.org
For VFP short vectors, the VFP registers are divided into a
series of banks: for single-precision these are s0-s7, s8-s15,
s16-s23 and s24-s31; for double-precision they are d0-d3,
d4-d7, ... d28-d31. Some banks are "scalar" meaning that
use of a register within them triggers a pure-scalar or
mixed vector-scalar operation rather than a full vector
operation. The scalar banks are s0-s7, d0-d3 and d16-d19.
When using a bank as part of a vector operation, we
iterate through it, increasing the register number by
the specified stride each time, and wrapping around to
the beginning of the bank.
Unfortunately our calculation of the "increment" part of this
was incorrect:
vd = ((vd + delta_d) & (bank_mask - 1)) | (vd & bank_mask)
will only do the intended thing if bank_mask has exactly
one set high bit. For instance for doubles (bank_mask = 0xc),
if we start with vd = 6 and delta_d = 2 then vd is updated
to 12 rather than the intended 4.
This only causes problems in the unlikely case that the
starting register is not the first in its bank: if the
register number doesn't have to wrap around then the
expression happens to give the right answer.
Fix this bug by abstracting out the "check whether register
is in a scalar bank" and "advance register within bank"
operations to utility functions which use the right
bit masking operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the float-to-integer VCVT instructions to decodetree.
Since these are the last unconverted instructions, we can
delete the old decoder structure entirely now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT (between floating-point and fixed-point) instructions
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VJCVT instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT integer-to-float instructions to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT double/single precision conversion insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP round-to-integer instructions VRINTR, VRINTZ and
VRINTX to decodetree.
These instructions were only introduced as part of the "VFP misc"
additions in v8A, so we check this. The old decoder's implementation
was incorrectly providing them even for v7A CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTT and VCVTB instructions which convert from
f32 and f64 to f16 to decodetree.
Since we're no longer constrained to the old decoder's style
using cpu_F0s and cpu_F0d we can perform a direct 16 bit
store of the right half of the input single-precision register
rather than doing a load/modify/store sequence on the full
32 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTT, VCVTB instructions that deal with conversion
from half-precision floats to f32 or 64 to decodetree.
Since we're no longer constrained to the old decoder's style
using cpu_F0s and cpu_F0d we can perform a direct 16 bit
load of the right half of the input single-precision register
rather than loading the full 32 bits and then doing a
separate shift or sign-extension.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP comparison instructions to decodetree.
Note that comparison instructions should not honour the VFP
short-vector length and stride information: they are scalar-only
operations. This applies to all the 2-operand instructions except
for VMOV, VABS, VNEG and VSQRT. (In the old decoder this is
implemented via the "if (op == 15 && rn > 3) { veclen = 0; }" check.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSQRT instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VNEG instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VABS instruction to decodetree.
Unlike the 3-op versions, we don't pass fpst to the VFPGen2OpSPFn or
VFPGen2OpDPFn because none of the operations which use this format
and support short vectors will need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMOV (immediate) instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP fused multiply-add instructions (VFNMA, VFNMS,
VFMA, VFMS) to decodetree.
Note that in the old decode structure we were implementing
these to honour the VFP vector stride/length. These instructions
were introduced in VFPv4, and in the v7A architecture they
are UNPREDICTABLE if the vector stride or length are non-zero.
In v8A they must UNDEF if stride or length are non-zero, like
all VFP instructions; we choose to UNDEF always.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VDIV instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSUB instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VADD instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VNMUL instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMUL instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VNMLA instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VNMLS instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMLS instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMLA instruction to decodetree.
This is the first of the VFP 3-operand data processing instructions,
so we include in this patch the code which loops over the elements
for an old-style VFP vector operation. The existing code to do this
looping uses the deprecated cpu_F0s/F0d/F1s/F1d TCG globals; since
we are going to be converting instructions one at a time anyway
we can take the opportunity to make the new loop use TCG temporaries,
which means we can do that conversion one operation at a time
rather than needing to do it all in one go.
We include an UNDEF check which was missing in the old code:
short-vector operations (with stride or length non-zero) were
deprecated in v7A and must UNDEF in v8A, so if the MVFR0 FPShVec
field does not indicate that support for short vectors is present
we UNDEF the operations that would use them. (This is a change
of behaviour for Cortex-A7, Cortex-A15 and the v8 CPUs, which
previously were all incorrectly allowing short-vector operations.)
Note that the conversion fixes a bug in the old code for the
case of VFP short-vector "mixed scalar/vector operations". These
happen where the destination register is in a vector bank but
but the second operand is in a scalar bank. For example
vmla.f64 d10, d1, d16 with length 2 stride 2
is equivalent to the pair of scalar operations
vmla.f64 d10, d1, d16
vmla.f64 d8, d3, d16
where the destination and first input register cycle through
their vector but the second input is scalar (d16). In the
old decoder the gen_vfp_F1_mul() operation uses cpu_F1{s,d}
as a temporary output for the multiply, which trashes the
second input operand. For the fully-scalar case (where we
never do a second iteration) and the fully-vector case
(where the loop loads the new second input operand) this
doesn't matter, but for the mixed scalar/vector case we
will end up using the wrong value for later loop iterations.
In the new code we use TCG temporaries and so avoid the bug.
This bug is present for all the multiply-accumulate insns
that operate on short vectors: VMLA, VMLS, VNMLA, VNMLS.
Note 2: the expression used to calculate the next register
number in the vector bank is not in fact correct; we leave
this behaviour unchanged from the old decoder and will
fix this bug later in the series.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Expand out the sequences in the new decoder VLDR/VSTR/VLDM/VSTM trans
functions which perform the memory accesses by going via the TCG
globals cpu_F0s and cpu_F0d, to use local TCG temps instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP load/store multiple insns to decodetree.
This includes tightening up the UNDEF checking for pre-VFPv3
CPUs which only have D0-D15 : they now UNDEF for any access
to D16-D31, not merely when the smallest register in the
transfer list is in D16-D31.
This conversion does not try to share code between the single
precision and the double precision versions; this looks a bit
duplicative of code, but it leaves the door open for a future
refactoring which gets rid of the use of the "F0" registers
by inlining the various functions like gen_vfp_ld() and
gen_mov_F0_reg() which are hiding "if (dp) { ... } else { ... }"
conditionalisation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP single load/store insns VLDR and VSTR to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP two-register transfer instructions to decodetree
(in the v8 Arm ARM these are the "Advanced SIMD and floating-point
64-bit move" encoding group).
Again, we expand out the sequences involving gen_vfp_msr() and
gen_msr_vfp().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "single-precision" register moves to decodetree:
* VMSR
* VMRS
* VMOV between general purpose register and single precision
Note that the VMSR/VMRS conversions make our handling of
the "should this UNDEF?" checks consistent between the two
instructions:
* VMSR to MVFR0, MVFR1, MVFR2 now UNDEF from EL0
(previously was a nop)
* VMSR to FPSID now UNDEFs from EL0 or if VFPv3 or better
(previously was a nop)
* VMSR to FPINST and FPINST2 now UNDEF if VFPv3 or better
(previously would write to the register, which had no
guest-visible effect because we always UNDEF reads)
We also tighten up the decode: we were previously underdecoding
some SBZ or SBO bits.
The conversion of VMOV_single includes the expansion out of the
gen_mov_F0_vreg()/gen_vfp_mrs() and gen_mov_vreg_F0()/gen_vfp_msr()
sequences into the simpler direct load/store of the TCG temp via
neon_{load,store}_reg32(): we know in the new function that we're
always single-precision, we don't need to use the old-and-deprecated
cpu_F0* TCG globals, and we don't happen to have the declaration of
gen_vfp_msr() and gen_vfp_mrs() at the point in the file where the
new function is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "double-precision" register moves to decodetree:
this covers VMOV scalar-to-gpreg, VMOV gpreg-to-scalar and VDUP.
Note that the conversion process has tightened up a few of the
UNDEF encoding checks: we now correctly forbid:
* VMOV-to-gpr with U:opc1:opc2 == 10x00 or x0x10
* VMOV-from-gpr with opc1:opc2 == 0x10
* VDUP with B:E == 11
* VDUP with Q == 1 and Vn<0> == 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
The accesses of elements < 32 bits could be improved by doing
direct ld/st of the right size rather than 32-bit read-and-shift
or read-modify-write, but we leave this for later cleanup,
since this series is generally trying to stick to fixing
the decode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The current VFP code has two different idioms for
loading and storing from the VFP register file:
1 using the gen_mov_F0_vreg() and similar functions,
which load and store to a fixed set of TCG globals
cpu_F0s, CPU_F0d, etc
2 by direct calls to tcg_gen_ld_f64() and friends
We want to phase out idiom 1 (because the use of the
fixed globals is a relic of a much older version of TCG),
but idiom 2 is quite longwinded:
tcg_gen_ld_f64(tmp, cpu_env, vfp_reg_offset(true, reg))
requires us to specify the 64-bitness twice, once in
the function name and once by passing 'true' to
vfp_reg_offset(). There's no guard against accidentally
passing the wrong flag.
Instead, let's move to a convention of accessing 64-bit
registers via the existing neon_load_reg64() and
neon_store_reg64(), and provide new neon_load_reg32()
and neon_store_reg32() for the 32-bit equivalents.
Implement the new functions and use them in the code in
translate-vfp.inc.c. We will convert the rest of the VFP
code as we do the decodetree conversion in subsequent
commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the trans_*() functions we've just created from translate.c
to translate-vfp.inc.c. This is pure code motion with no textual
changes (this can be checked with 'git show --color-moved').
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTA/VCVTN/VCVTP/VCVTM instructions to decodetree.
trans_VCVT() is temporarily left in translate.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VRINTA/VRINTN/VRINTP/VRINTM instructions to decodetree.
Again, trans_VRINT() is temporarily left in translate.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMINNM and VMAXNM instructions to decodetree.
As with VSEL, we leave the trans_VMINMAXNM() function
in translate.c for the moment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSEL instructions to decodetree.
We leave trans_VSEL() in translate.c for now as this allows
the patch to show just the changes from the old handle_vsel().
In the old code the check for "do D16-D31 exist" was hidden in
the VFP_DREG macro, and assumed that VFPv3 always implied that
D16-D31 exist. In the new code we do the correct ID register test.
This gives identical behaviour for most of our CPUs, and fixes
previously incorrect handling for Cortex-R5F, Cortex-M4 and
Cortex-M33, which all implement VFPv3 or better with only 16
double-precision registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
At the moment our -cpu max for AArch32 supports VFP short-vectors
because we always implement them, even for CPUs which should
not have them. The following commits are going to switch to
using the correct ID-register-check to enable or disable short
vector support, so we need to turn it on explicitly for -cpu max,
because Cortex-A15 doesn't implement it.
We don't enable this for the AArch64 -cpu max, because the v8A
architecture never supports short-vectors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Cortex-R5F initfn was not correctly setting up the MVFR
ID register values. Fill these in, since some subsequent patches
will use ID register checks rather than CPU feature bit checks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out the VFP access checking code so that we can use it in the
leaf functions of the decodetree decoder.
We call the function full_vfp_access_check() so we can keep
the more natural vfp_access_check() for a version which doesn't
have the 'ignore_vfp_enabled' flag -- that way almost all VFP
insns will be able to use vfp_access_check(s) and only the
special-register access function will have to use
full_vfp_access_check(s, ignore_vfp_enabled).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the infrastructure for building and invoking a decodetree decoder
for the AArch32 VFP encodings. At the moment the new decoder covers
nothing, so we always fall back to the existing hand-written decode.
We need to have one decoder for the unconditional insns and one for
the conditional insns, as otherwise the patterns for conditional
insns would incorrectly match against the unconditional ones too.
Since translate.c is over 14,000 lines long and we're going to be
touching pretty much every line of the VFP code as part of the
decodetree conversion, we create a new translate-vfp.inc.c to hold
the code which deals with VFP in the new scheme. It should be
possible to convert this into a standalone translation unit
eventually, but the conversion process will be much simpler if we
simply #include it midway through translate.c to start with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The ARM pseudocode installs the error_code into the original
pointer, not the encrypted pointer. The difference applies
within the 7 bits of pac data; the result should be the sign
extension of bit 55.
Add a testcase to that effect.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NSACR register allows secure code to configure the FPU
to be inaccessible to non-secure code. If the NSACR.CP10
bit is set then:
* NS accesses to the FPU trap as UNDEF (ie to NS EL1 or EL2)
* CPACR.{CP10,CP11} behave as if RAZ/WI
* HCPTR.{TCP11,TCP10} behave as if RAO/WI
Note that we do not implement the NSACR.NSASEDIS bit which
gates only access to Advanced SIMD, in the same way that
we don't implement the equivalent CPACR.ASEDIS and HCPTR.TASE.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190510110357.18825-1-peter.maydell@linaro.org
This replaces 3 target-specific implementations for BIT, BIF, and BSL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190518191934.21887-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is ostensibly to avoid the weirdness of len looking like it might
come from a guest and sometimes being used. While we are at it fix up
the error checking for the arm-linux-user implementation of the API
which got flagged up by Coverity (CID 1401700).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
This macro is now always empty, so remove it. This leaves the
entire contents of CPUArchState under the control of the guest
architecture.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Consolidate some boilerplate from foo_cpu_initfn.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace arm_env_get_cpu with env_archcpu. The combination
CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all softmmu tlb data into this structure. Arrange the
members so that we are able to place mask+table together and
at a smaller absolute offset from ENV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.
Include this new file from exec/cpu-defs.h.
This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The documentation says the write should return the number of bytes not
written on an error (0 means everything was written). Read provides a
buffer length and the return value should be the buffer length - bytes
actually read. Remove the incorrect FIXME's and return the correct
values.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Clean-up our unimplemented bits with a proper message.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Now we have a common semihosting console interface use that for our
string output. However ARM is currently unique in also supporting
semihosting for linux-user so we need to replicate the API in
linux-user. If other architectures gain this support we can move the
file later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This cleans up a number of the block comments to fit the proper style.
While we are at it we also reference the official specification and
document what the return register value can be.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The hw/arm/arm.h header now only includes declarations relating
to boot.c code, so it is only needed by Arm board or SoC code.
Remove some unnecessary inclusions of it from target/arm files
and from hw/intc/armv7m_nvic.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-3-peter.maydell@linaro.org
Commit 89e68b575 "target/arm: Use vector operations for saturation"
causes this abort() when booting QEMU ARM with a Cortex-A15:
0 0x00007ffff4c2382f in raise () at /usr/lib/libc.so.6
1 0x00007ffff4c0e672 in abort () at /usr/lib/libc.so.6
2 0x00005555559c1839 in disas_neon_data_insn (insn=<optimized out>, s=<optimized out>) at ./target/arm/translate.c:6673
3 0x00005555559c1839 in disas_neon_data_insn (s=<optimized out>, insn=<optimized out>) at ./target/arm/translate.c:6386
4 0x00005555559cd8a4 in disas_arm_insn (insn=4081107068, s=0x7fffe59a9510) at ./target/arm/translate.c:9289
5 0x00005555559cd8a4 in arm_tr_translate_insn (dcbase=0x7fffe59a9510, cpu=<optimized out>) at ./target/arm/translate.c:13612
6 0x00005555558d1d39 in translator_loop (ops=0x5555561cc580 <arm_translator_ops>, db=0x7fffe59a9510, cpu=0x55555686a2f0, tb=<optimized out>, max_insns=<optimized out>) at ./accel/tcg/translator.c:96
7 0x00005555559d10d4 in gen_intermediate_code (cpu=cpu@entry=0x55555686a2f0, tb=tb@entry=0x7fffd7840080 <code_gen_buffer+126091347>, max_insns=max_insns@entry=512) at ./target/arm/translate.c:13901
8 0x00005555558d06b9 in tb_gen_code (cpu=cpu@entry=0x55555686a2f0, pc=3067096216, cs_base=0, flags=192, cflags=-16252928, cflags@entry=524288) at ./accel/tcg/translate-all.c:1736
9 0x00005555558ce467 in tb_find (cf_mask=524288, tb_exit=1, last_tb=0x7fffd783e640 <code_gen_buffer+126084627>, cpu=0x1) at ./accel/tcg/cpu-exec.c:407
10 0x00005555558ce467 in cpu_exec (cpu=cpu@entry=0x55555686a2f0) at ./accel/tcg/cpu-exec.c:728
11 0x000055555588b0cf in tcg_cpu_exec (cpu=0x55555686a2f0) at ./cpus.c:1431
12 0x000055555588d223 in qemu_tcg_cpu_thread_fn (arg=0x55555686a2f0) at ./cpus.c:1735
13 0x000055555588d223 in qemu_tcg_cpu_thread_fn (arg=arg@entry=0x55555686a2f0) at ./cpus.c:1709
14 0x0000555555d2629a in qemu_thread_start (args=<optimized out>) at ./util/qemu-thread-posix.c:502
15 0x00007ffff4db8a92 in start_thread () at /usr/lib/libpthread.
This patch ensures that we don't hit the abort() in the second switch
case in disas_neon_data_insn() as we will return from the first case.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: ad91b397f360b2fc7f4087e476f7df5b04d42ddb.1558021877.git.alistair.francis@wdc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mask implied by the extract is redundant with the one
implied by the deposit. Also, fix spelling of BFXIL.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190514011129.11330-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is, after all, how we implement extract2 in tcg/aarch64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190514011129.11330-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the newly introduced infrastructure for guest random numbers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This allows us to use a single syscall to initialize them all.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzVx4UdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+U1Af/b3cV5d5a1LWRdLgR
71JCPK/M3o43r2U9wCSikteXkmNBEdEoc5+WRk2SuZFLW/JB1DHDY7/gISPIhfoB
ZIza2TxD/QK1CQ5/mMWruKBlyygbYYZgsYaaNsMJRJgicgOSjTN0nuHMbIfv3tAN
mu+IlkD0LdhVjP0fz30Jpew3b3575RCjYxEPM6KQI3RxtQFjZ3FhqV5hKR4vtdP5
yLWJQzwAbaCB3SZUvvp7TN1ZsmeyLpc+Yz/YtRTqQedo7SNWWBKldLhqq4bZnH1I
AkzHbtWIOBrjWJ34ZMAgI5Q56Du9TBbBvCdM9azmrQjSu/2kdsPBPcUyOpnUCsCx
NyXo9g==
=x71l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190510' into staging
Add CPUClass::tlb_fill.
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
# gpg: Signature made Fri 10 May 2019 19:48:37 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190510: (27 commits)
tcg: Use tlb_fill probe from tlb_vaddr_to_host
tcg: Remove CPUClass::handle_mmu_fault
tcg: Use CPUClass::tlb_fill in cputlb.c
target/xtensa: Convert to CPUClass::tlb_fill
target/unicore32: Convert to CPUClass::tlb_fill
target/tricore: Convert to CPUClass::tlb_fill
target/tilegx: Convert to CPUClass::tlb_fill
target/sparc: Convert to CPUClass::tlb_fill
target/sh4: Convert to CPUClass::tlb_fill
target/s390x: Convert to CPUClass::tlb_fill
target/riscv: Convert to CPUClass::tlb_fill
target/ppc: Convert to CPUClass::tlb_fill
target/openrisc: Convert to CPUClass::tlb_fill
target/nios2: Convert to CPUClass::tlb_fill
target/moxie: Convert to CPUClass::tlb_fill
target/mips: Convert to CPUClass::tlb_fill
target/mips: Tidy control flow in mips_cpu_handle_mmu_fault
target/mips: Pass a valid error to raise_mmu_exception for user-only
target/microblaze: Convert to CPUClass::tlb_fill
target/m68k: Convert to CPUClass::tlb_fill
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the single opcode in .opc with a null-terminated
array in .opt_opc. We still require that all opcodes be
used with the same .vece.
Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion. Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.
Convert all existing vector aware front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most of the existing users would continue around a loop which
would fault the tlb entry in via a normal load/store.
But for AArch64 SVE we have an existing emulation bug wherein we
would mark the first element of a no-fault vector load as faulted
(within the FFR, not via exception) just because we did not have
its address in the TLB. Now we can properly only mark it as faulted
if there really is no valid, readable translation, while still not
raising an exception. (Note that beyond the first element of the
vector, the hardware may report a fault for any reason whatsoever;
with at least one element loaded, forward progress is guaranteed.)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Stop using variable length array in dc_zva
* Implement M-profile XPSR GE bits
* Don't enable ARMV7M_EXCP_DEBUG from reset
* armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
* armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
* fix various minor issues to allow building for Windows-on-ARM64
* aspeed: Set SDRAM size
* Allow system registers for KVM guests to be changed by QEMU code
* raspi: Diagnose requests for too much RAM
* virt: Support firmware configuration with -blockdev
-----BEGIN PGP SIGNATURE-----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=hcal
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190507' into staging
target-arm queue:
* Stop using variable length array in dc_zva
* Implement M-profile XPSR GE bits
* Don't enable ARMV7M_EXCP_DEBUG from reset
* armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
* armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
* fix various minor issues to allow building for Windows-on-ARM64
* aspeed: Set SDRAM size
* Allow system registers for KVM guests to be changed by QEMU code
* raspi: Diagnose requests for too much RAM
* virt: Support firmware configuration with -blockdev
# gpg: Signature made Tue 07 May 2019 12:59:30 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190507:
target/arm: Stop using variable length array in dc_zva
target/arm: Implement XPSR GE bits
hw/intc/armv7m_nvic: Don't enable ARMV7M_EXCP_DEBUG from reset
hw/intc/armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
hw/arm/armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
osdep: Fix mingw compilation regarding stdio formats
util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
qga: Fix mingw compilation warnings on enum conversion
QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
arm: aspeed: Set SDRAM size
arm: Allow system registers for KVM guests to be changed by QEMU code
hw/arm/raspi: Diagnose requests for too much RAM
hw/arm/virt: Support firmware configuration with -blockdev
pflash_cfi01: New pflash_cfi01_legacy_drive()
pc: Rearrange pc_system_firmware_init()'s legacy -drive loop
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the dc_zva helper function uses a variable length
array. In fact we know (as the comment above remarks) that
the length of this array is bounded because the architecture
limits the block size and QEMU limits the target page size.
Use a fixed array size and assert that we don't run off it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190503120448.13385-1-peter.maydell@linaro.org
In the M-profile architecture, if the CPU implements the DSP extension
then the XPSR has GE bits, in the same way as the A-profile CPSR. When
we added DSP extension support we forgot to add support for reading
and writing the GE bits, which are stored in env->GE. We did put in
the code to add XPSR_GE to the mask of bits to update in the v7m_msr
helper, but forgot it in v7m_mrs. We also must not allow the XPSR we
pull off the stack on exception return to set the nonexistent GE bits.
Correct these errors:
* read and write env->GE in xpsr_read() and xpsr_write()
* only set GE bits on exception return if DSP present
* read GE bits for MRS if DSP present
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190430131439.25251-5-peter.maydell@linaro.org
At the moment the Arm implementations of kvm_arch_{get,put}_registers()
don't support having QEMU change the values of system registers
(aka coprocessor registers for AArch32). This is because although
kvm_arch_get_registers() calls write_list_to_cpustate() to
update the CPU state struct fields (so QEMU code can read the
values in the usual way), kvm_arch_put_registers() does not
call write_cpustate_to_list(), meaning that any changes to
the CPU state struct fields will not be passed back to KVM.
The rationale for this design is documented in a comment in the
AArch32 kvm_arch_put_registers() -- writing the values in the
cpregs list into the CPU state struct is "lossy" because the
write of a register might not succeed, and so if we blindly
copy the CPU state values back again we will incorrectly
change register values for the guest. The assumption was that
no QEMU code would need to write to the registers.
However, when we implemented debug support for KVM guests, we
broke that assumption: the code to handle "set the guest up
to take a breakpoint exception" does so by updating various
guest registers including ESR_EL1.
Support this by making kvm_arch_put_registers() synchronize
CPU state back into the list. We sync only those registers
where the initial write succeeds, which should be sufficient.
This commit is the same as commit 823e1b3818 which we
had to revert in commit 942f99c825, except that the bug
which was preventing EDK2 guest firmware running has been fixed:
kvm_arm_reset_vcpu() now calls write_list_to_cpustate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Enable the FPU by default for the Cortex-M4 and Cortex-M33.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-27-peter.maydell@linaro.org
Implement the VLLDM instruction for v7M for the FPU present cas.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-26-peter.maydell@linaro.org
Implement the VLSTM instruction for v7M for the FPU present case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-25-peter.maydell@linaro.org
The M-profile architecture floating point system supports
lazy FP state preservation, where FP registers are not
pushed to the stack when an exception occurs but are instead
only saved if and when the first FP instruction in the exception
handler is executed. Implement this in QEMU, corresponding
to the check of LSPACT in the pseudocode ExecuteFPCheck().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-24-peter.maydell@linaro.org
Pushing registers to the stack for v7M needs to handle three cases:
* the "normal" case where we pend exceptions
* an "ignore faults" case where we set FSR bits but
do not pend exceptions (this is used when we are
handling some kinds of derived exception on exception entry)
* a "lazy FP stacking" case, where different FSR bits
are set and the exception is pended differently
Implement this by changing the existing flag argument that
tells us whether to ignore faults or not into an enum that
specifies which of the 3 modes we should handle.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-23-peter.maydell@linaro.org
In the v7M architecture, if an exception is generated in the process
of doing the lazy stacking of FP registers, the handling of
possible escalation to HardFault is treated differently to the normal
approach: it works based on the saved information about exception
readiness that was stored in the FPCCR when the stack frame was
created. Provide a new function armv7m_nvic_set_pending_lazyfp()
which pends exceptions during lazy stacking, and implements
this logic.
This corresponds to the pseudocode TakePreserveFPException().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-22-peter.maydell@linaro.org
Add a new helper function which returns the MMU index to use
for v7M, where the caller specifies all of the security
state, privilege level and whether the execution priority
is negative, and reimplement the existing
arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it.
We are going to need this for the lazy-FP-stacking code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-21-peter.maydell@linaro.org
The M-profile FPCCR.ASPEN bit indicates that automatic floating-point
context preservation is enabled. Before executing any floating-point
instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits
indicate that there is no active floating point context then we
must create a new context (by initializing FPSCR and setting
FPCA/SFPA to indicate that the context is now active). In the
pseudocode this is handled by ExecuteFPCheck().
Implement this with a new TB flag which tracks whether we
need to create a new FP context.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-20-peter.maydell@linaro.org
The M-profile FPCCR.S bit indicates the security status of
the floating point context. In the pseudocode ExecuteFPCheck()
function it is unconditionally set to match the current
security state whenever a floating point instruction is
executed.
Implement this by adding a new TB flag which tracks whether
FPCCR.S is different from the current security state, so
that we only need to emit the code to update it in the
less-common case when it is not already set correctly.
Note that we will add the handling for the other work done
by ExecuteFPCheck() in later commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-19-peter.maydell@linaro.org
We are close to running out of TB flags for AArch32; we could
start using the cs_base word, but before we do that we can
economise on our usage by sharing the same bits for the VFP
VECSTRIDE field and the XScale XSCALE_CPAR field. This
works because no XScale CPU ever had VFP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-18-peter.maydell@linaro.org
Move the NS TBFLAG down from bit 19 to bit 6, which has not
been used since commit c1e3781090 in 2015, when we
started passing the entire MMU index in the TB flags rather
than just a 'privilege level' bit.
This rearrangement is not strictly necessary, but means that
we can put M-profile-only bits next to each other rather
than scattered across the flag word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-17-peter.maydell@linaro.org
Handle floating point registers in exception return.
This corresponds to pseudocode functions ValidateExceptionReturn(),
ExceptionReturn(), PopStack() and ConsumeExcStackFrame().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-16-peter.maydell@linaro.org
The magic value pushed onto the callee stack as an integrity
check is different if floating point is present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-15-peter.maydell@linaro.org
The TailChain() pseudocode specifies that a tail chaining
exception should sanitize the excReturn all-ones bits and
(if there is no FPU) the excReturn FType bits; we weren't
doing this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-14-peter.maydell@linaro.org
For v8M floating point support, transitions from Secure
to Non-secure state via BLNS and BLXNS must clear the
CONTROL.SFPA bit. (This corresponds to the pseudocode
BranchToNS() function.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-13-peter.maydell@linaro.org
Implement the code which updates the FPCCR register on an
exception entry where we are going to use lazy FP stacking.
We have to defer to the NVIC to determine whether the
various exceptions are currently ready or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190416125744.27770-12-peter.maydell@linaro.org
Handle floating point registers in exception entry.
This corresponds to the FP-specific parts of the pseudocode
functions ActivateException() and PushStack().
We defer the code corresponding to UpdateFPCCR() to a later patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-11-peter.maydell@linaro.org
Currently the code in v7m_push_stack() which detects a violation
of the v8M stack limit simply returns early if it does so. This
is OK for the current integer-only code, but won't work for the
floating point handling we're about to add. We need to continue
executing the rest of the function so that we check for other
exceptions like not having permission to use the FPU and so
that we correctly set the FPCCR state if we are doing lazy
stacking. Refactor to avoid the early return.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-10-peter.maydell@linaro.org
The M-profile CONTROL register has two bits -- SFPA and FPCA --
which relate to floating-point support, and should be RES0 otherwise.
Handle them correctly in the MSR/MRS register access code.
Neither is banked between security states, so they are stored
in v7m.control[M_REG_S] regardless of current security state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-9-peter.maydell@linaro.org
If the floating point extension is present, then the SG instruction
must clear the CONTROL_S.SFPA bit. Implement this.
(On a no-FPU system the bit will always be zero, so we don't need
to make the clearing of the bit conditional on ARM_FEATURE_VFP.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-8-peter.maydell@linaro.org
Correct the decode of the M-profile "coprocessor and
floating-point instructions" space:
* op0 == 0b11 is always unallocated
* if the CPU has an FPU then all insns with op1 == 0b101
are floating point and go to disas_vfp_insn()
For the moment we leave VLLDM and VLSTM as NOPs; in
a later commit we will fill in the proper implementation
for the case where an FPU is present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-7-peter.maydell@linaro.org
Like AArch64, M-profile floating point has no FPEXC enable
bit to gate floating point; so always set the VFPEN TB flag.
M-profile also has CPACR and NSACR similar to A-profile;
they behave slightly differently:
* the CPACR is banked between Secure and Non-Secure
* if the NSACR forces a trap then this is taken to
the Secure state, not the Non-Secure state
Honour the CPACR and NSACR settings. The NSACR handling
requires us to borrow the exception.target_el field
(usually meaningless for M profile) to distinguish the
NOCP UsageFault taken to Secure state from the more
usual fault taken to the current security state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-6-peter.maydell@linaro.org
The only "system register" that M-profile floating point exposes
via the VMRS/VMRS instructions is FPSCR, and it does not have
the odd special case for rd==15. Add a check to ensure we only
expose FPSCR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-5-peter.maydell@linaro.org
The M-profile floating point support has three associated config
registers: FPCAR, FPCCR and FPDSCR. It also makes the registers
CPACR and NSACR have behaviour other than reads-as-zero.
Add support for all of these as simple reads-as-written registers.
We will hook up actual functionality later.
The main complexity here is handling the FPCCR register, which
has a mix of banked and unbanked bits.
Note that we don't share storage with the A-profile
cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour
is quite similar, for two reasons:
* the M profile CPACR is banked between security states
* it preserves the invariant that M profile uses no state
inside the cp15 substruct
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-4-peter.maydell@linaro.org
Enforce that for M-profile various FPSCR bits which are RES0 there
but have defined meanings on A-profile are never settable. This
ensures that M-profile code can't enable the A-profile behaviour
(notably vector length/stride handling) by accident.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-2-peter.maydell@linaro.org
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These functions are not used outside helper.c
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cortex-a7 and cortex-a15 have pmus (PMUv2) and they advertise
them in ID_DFR0. Let's allow them to function. This also enables
the pmu cpu property to work with these cpu types, i.e. we can
now do '-cpu cortex-a15,pmu=off' to remove the pmu.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a QEMU NULL derefence that occurs when the guest attempts to
enable PMU counters with a non-v8 cpu model or a v8 cpu model
which has not configured a PMU.
Fixes: 4e7beb0cc0 ("target/arm: Add a timer to predict PMU counter overflow")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The second word has been loaded from the unincremented
address since the first commit.
Fixes: 44ac14b06f
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190322234302.12770-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These instructions do not trap when SVE is disabled in EL0,
causing them to be executed with wrong size information.
Signed-off-by: Amir Charif <amir.charif@cea.fr>
Message-id: 1552579248-31025-1-git-send-email-amir.charif@cea.fr
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added 'target/arm' prefix to subject]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some generic arch timer registers are Config-RW in the EL0,
which means the EL0 exception level can have write permission
if it is appropriately configured.
When VM access registers, QEMU firstly checks whether they have RW
permission, then check whether it is appropriately configured.
If they are defined to read only in EL0, even though they have been
appropriately configured, they still do not have write permission.
So need to add the write permission according to ARMV8 spec when
define it.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 1552395177-12608-1-git-send-email-gengdongjiu@huawei.com
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the kvm_arm_get_max_vm_ipa_size() helper that returns the
number of bits in the IPA address space supported by KVM.
This capability needs to be known to create the VM with a
specific IPA max size (kvm_type passed along KVM_CREATE_VM ioctl.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-6-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will allow sharing code that adjusts rmode beyond
the existing users.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This decoding more closely matches the ARMv8.4 Table C4-6,
Encoding table for Data Processing - Register Group.
In particular, op2 == 0 is now more than just Add/sub (with carry).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We do not need an out-of-line helper for manipulating bits in pstate.
While changing things, share the implementation of gen_ss_advance.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL0+UMA check is unique to DAIF. While SPSel had avoided the
check by nature of already checking EL >= 1, the other post v8.0
extensions to MSR (imm) allow EL0 and do not require UMA. Avoid
the unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minimize the number of places that will need updating when
the virtual host extensions are added.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Found by inspection: Rn is the base register against which the
load began; I is the register within the mask being processed.
The exception return should of course be processed from the loaded PC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190301202921.21209-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219222952.22183-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219222952.22183-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219222952.22183-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that float16_to_float32 rightly squashes SNaN to QNaN.
But of course pickNaNMulAdd, for ARM, selects SNaNs first.
So we have to preserve SNaN long enough for the correct NaN
to be selected. Thus float16_to_float32_by_bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219222952.22183-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 823e1b3818,
which introduces a regression running EDK2 guest firmware
under KVM:
error: kvm run failed Function not implemented
PC=000000013f5a6208 X00=00000000404003c4 X01=000000000000003a
X02=0000000000000000 X03=00000000404003c4 X04=0000000000000000
X05=0000000096000046 X06=000000013d2ef270 X07=000000013e3d1710
X08=09010755ffaf8ba8 X09=ffaf8b9cfeeb5468 X10=feeb546409010756
X11=09010757ffaf8b90 X12=feeb50680903068b X13=090306a1ffaf8bc0
X14=0000000000000000 X15=0000000000000000 X16=000000013f872da0
X17=00000000ffffa6ab X18=0000000000000000 X19=000000013f5a92d0
X20=000000013f5a7a78 X21=000000000000003a X22=000000013f5a7ab2
X23=000000013f5a92e8 X24=000000013f631090 X25=0000000000000010
X26=0000000000000100 X27=000000013f89501b X28=000000013e3d14e0
X29=000000013e3d12a0 X30=000000013f5a2518 SP=000000013b7be0b0
PSTATE=404003c4 -Z-- EL1t
with
[ 3507.926571] kvm [35042]: load/store instruction decoding not implemented
in the host dmesg.
Revert the change for the moment until we can investigate the
cause of the regression.
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a set of VFP instructions which we implement in
disas_vfp_v8_insn() and gate on the ARM_FEATURE_V8 bit.
These were all first introduced in v8 for A-profile, but in
M-profile they appeared in v7M. Gate them on the MVFR2
FPMisc field instead, and rename the function appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190222170936.13268-3-peter.maydell@linaro.org
Instead of gating the A32/T32 FP16 conversion instructions on
the ARM_FEATURE_VFP_FP16 flag, switch to our new approach of
looking at ID register bits. In this case MVFR1 fields FPHP
and SIMDHP indicate the presence of these insns.
This change doesn't alter behaviour for any of our CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190222170936.13268-2-peter.maydell@linaro.org
Currently the Arm arm-powerctl.h APIs allow:
* arm_set_cpu_on(), which powers on a CPU and sets its
initial PC and other startup state
* arm_reset_cpu(), which resets a CPU which is already on
(and fails if the CPU is powered off)
but there is no way to say "power on a CPU as if it had
just come out of reset and don't do anything else to it".
Add a new function arm_set_cpu_on_and_reset(), which does this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219125808.25174-5-peter.maydell@linaro.org
Make the M-profile "init-svtor" property be settable after realize.
This matches the hardware, where this is a config signal which
is sampled on CPU reset and can thus be changed between one
reset and another. To do this we have to change the API we
use to add the property.
(We will need this capability for the SSE-200.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219125808.25174-4-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190215192302.27855-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed a couple of comment typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are lots of special cases within these insns. Split the
major argument decode/loading/saving into no_output (compares),
rd_is_dp, and rm_is_dp.
We still need to special case argument load for compare (rd as
input, rm as zero) and vcvt fixed (rd as input+output), but lots
of special cases do disappear.
Now that we have a full switch at the beginning, hoist the ISA
checks from the code generation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190215192302.27855-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all of the fp helpers out of helper.c into a new file.
This is code movement only. Since helper.c has no copyright
header, take the one from cpu.h for the new file.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190215192302.27855-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For opcodes 0-5, move some if conditions into the structure
of a switch statement. For opcodes 6 & 7, decode everything
at once with a second switch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190215192302.27855-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was introduced by
commit bf8d09694c
target/arm: Don't clear supported PMU events when initializing PMCEID1
and identified by Coverity (CID 1398645).
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190219144621.450-1-aaron@os.amperecomputing.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "background region" for a v8M MPU is a default which will be used
(if enabled, and if the access is privileged) if the access does
not match any specific MPU region. We were incorrectly using it
always (by putting the condition at the wrong nesting level). This
meant that we would always return the default background permissions
rather than the correct permissions for a specific region, and also
that we would not return the right information in response to a
TT instruction.
Move the check for the background region to the same place in the
logic as the equivalent v8M MPUCheck() pseudocode puts it.
This in turn means we must adjust the condition we use to detect
matches in multiple regions to avoid false-positives.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190214113408.10214-1-peter.maydell@linaro.org
Fortunately, the functions affected are so far only called from SVE,
so there is no tail to be cleared. But as we convert more of AdvSIMD
to gvec, this will matter.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For same-sign saturation, we have tcg vector operations. We can
compute the QC bit by comparing the saturated value against the
unsaturated value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the representation of this field such that it is easy
to set from vector code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Given that we mask bits properly on set, there is no reason
to mask them again on get. We failed to clear the exception
status bits, 0x9f, which means that the wrong value would be
returned on get. Except in the (probably normal) case in which
the set clears all of the bits.
Simplify the code in set to also clear the RES0 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minimize the code within a macro by splitting out a helper function.
Use deposit32 instead of manual bit manipulation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The components of this register is stored in several
different locations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are now unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 32-bit PMIN/PMAX has been decomposed to scalars,
and so can be trivially expanded inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we're now handling a == b generically, we no longer need
to do it by hand within target/arm/.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment the Arm implementations of kvm_arch_{get,put}_registers()
don't support having QEMU change the values of system registers
(aka coprocessor registers for AArch32). This is because although
kvm_arch_get_registers() calls write_list_to_cpustate() to
update the CPU state struct fields (so QEMU code can read the
values in the usual way), kvm_arch_put_registers() does not
call write_cpustate_to_list(), meaning that any changes to
the CPU state struct fields will not be passed back to KVM.
The rationale for this design is documented in a comment in the
AArch32 kvm_arch_put_registers() -- writing the values in the
cpregs list into the CPU state struct is "lossy" because the
write of a register might not succeed, and so if we blindly
copy the CPU state values back again we will incorrectly
change register values for the guest. The assumption was that
no QEMU code would need to write to the registers.
However, when we implemented debug support for KVM guests, we
broke that assumption: the code to handle "set the guest up
to take a breakpoint exception" does so by updating various
guest registers including ESR_EL1.
Support this by making kvm_arch_put_registers() synchronize
CPU state back into the list. We sync only those registers
where the initial write succeeds, which should be sufficient.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Dongjiu Geng <gengdongjiu@huawei.com>
There are a whole bunch more registers in the CPUID space which are
currently not used but are exposed as RAZ. To avoid too much
duplication we expand ARMCPRegUserSpaceInfo to understand glob
patterns so we only need one entry to tweak whole ranges of registers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-5-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As this is a single register we could expose it with a simple ifdef
but we use the existing modify_arm_cp_regs mechanism for consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-4-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of CPUID registers are exposed to userspace by modern Linux
kernels thanks to the "ARM64 CPU Feature Registers" ABI. For QEMU's
user-mode emulation we don't need to emulate the kernels trap but just
return the value the trap would have done. To avoid too much #ifdef
hackery we process ARMCPRegInfo with a new helper (modify_arm_cp_regs)
before defining the registers. The modify routine is driven by a
simple data structure which describes which bits are exported and
which are fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-3-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although technically not visible to userspace the kernel does make
them visible via a trap and emulate ABI. We provide a new permission
mask (PL0U_R) which maps to PL0_R for CONFIG_USER builds and adjust
the minimum permission check accordingly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The lo,hi order is different from the comments. And in commit
1ec182c333 ("target/arm: Convert to HAVE_CMPXCHG128"), it changes
the original code logic. So just restore the old code logic before this
commit:
do_paired_cmpxchg64_be():
cmpv = int128_make128(env->exclusive_high, env->exclusive_val);
newv = int128_make128(new_hi, new_lo);
This fixes a bug that would only be visible for big-endian
AArch64 guest code.
Fixes: 1ec182c333 ("target/arm: Convert to HAVE_CMPXCHG128")
Signed-off-by: Catherine Ho <catherine.hecx@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1548985244-24523-1-git-send-email-catherine.hecx@gmail.com
[PMM: added note that bug only affects BE guests]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HACR_EL2 is a register with IMPDEF behaviour, which allows
implementation specific trapping to EL2. Implement it as RAZ/WI,
since QEMU's implementation has no extra traps. This also
matches what h/w implementations like Cortex-A53 and A57 do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205181218.8995-1-peter.maydell@linaro.org
The {IOE, DZE, OFE, UFE, IXE, IDE} bits in the FPSCR/FPCR are for
enabling trapped IEEE floating point exceptions (where IEEE exception
conditions cause a CPU exception rather than updating the FPSR status
bits). QEMU doesn't implement this (and nor does the hardware we're
modelling), but for implementations which don't implement trapped
exception handling these control bits are supposed to be RAZ/WI.
This allows guest code to test for whether the feature is present
by trying to write to the bit and checking whether it sticks.
QEMU is incorrectly making these bits read as written. Make them
RAZ/WI as the architecture requires.
In particular this was causing problems for the NetBSD automatic
test suite.
Reported-by: Martin Husemann <martin@netbsd.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190131130700.28392-1-peter.maydell@linaro.org
This has been enabled in the linux kernel since v3.11
(commit d50240a5f6cea, 2013-09-03,
"arm64: mm: permit use of tagged pointers at EL0").
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enables, but does not turn on, TBI for CONFIG_USER_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-4-richard.henderson@linaro.org
[PMM: adjusted #ifdeffery to placate clang, which otherwise complains
about static functions that are unused in the CONFIG_USER_ONLY build]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will allow TBI to be used in user-only mode, as well as
avoid ping-ponging the softmmu TLB when TBI is in use. It
will also enable other armv8 extensions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out gen_top_byte_ignore in preparation of handling these
data accesses; the new tbflags field is not yet honored.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is all of the non-exception cases of DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190128223118.5255-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The branch target exception for guarded pages has high priority,
and only 8 instructions are valid for that case. Perform this
check before doing any other decode.
Clear BTYPE after all insns that neither set BTYPE nor exit via
exception (DISAS_NORETURN).
Not yet handled are insns that exit via DISAS_NORETURN for some
other reason, like direct branches.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Caching the bit means that we will not have to re-walk the
page tables to look up the bit during translation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190128223118.5255-6-richard.henderson@linaro.org
[PMM: no need to OR in guarded bit status]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Place this in its own field within ENV, as that will
make it easier to reset from within TCG generated code.
With the change to pstate_read/write, exception entry
and return are automatically handled.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also create field definitions for id_aa64pfr1 from ARMv8.5.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A flawed test lead to the instructions always being treated as
unallocated encodings.
Fixes: https://bugs.launchpad.net/bugs/1813460
Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since QEMU does not support the ARMv8.2-LVA, Large Virtual Address,
extension (yet), the VA address space is 48-bits plus a sign bit. User
mode can only handle the positive half of the address space, so that
makes a limit of 48 bits.
(With LVA, it would be 53 and 52 bits respectively.)
The incorrectly large address space conflicts with PAuth instructions,
which use bits 48-54 and 56-63 for the pointer authentication code. This
also conflicts with (as yet unsupported by QEMU) data tagging and with
the ARMv8.5-MTE extension.
Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the pac properties. This approach cannot work as written
because the properties are applied before arm_cpu_reset, which
zeros SCTLR_EL1 (amongst everything else).
We can re-introduce the properties if they turn out to be useful.
But since linux 5.0 enables all of the keys, they may not be.
Fixes: 1ae9cfbd47
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, the set_pc logic was unclear, which raised questions about
whether it should be used directly, applying a value to PC or adding
additional checks, for example, set the Thumb bit in Arm cpu. Let's set
the set_pc logic for “Configure the PC, as was done in the ELF file”
and implement synchronize_with_tb hook for preserving PC to cpu_tb_exec.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190129121817.7109-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These bits become writable with the ARMv8.3-PAuth extension.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190129143511.12311-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make PMU overflow interrupts more accurate by using a timer to predict
when they will overflow rather than waiting for an event to occur which
allows us to otherwise check them.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190124162401.5111-3-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Whenever we notice that a counter overflow has occurred, send an
interrupt. This is made more reliable with the addition of a timer in a
follow-on commit.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190124162401.5111-2-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In disas_simd_indexed(), for the case of "complex fp", each indexable
element is a complex pair, so the total size is twice that indicated
in the 'size' field in the encoding. We were trying to do this
"double the size" operation with a left shift by 1, but this is
incorrect because the 'size' field is a MO_8/MO_16/MO_32/MO_64
value, and doubling the size should be done by a simple increment.
This meant we were mishandling FCMLA (by element) of values where
the real and imaginary parts are 32-bit floats, and would incorrectly
UNDEF this encoding. (No other insns take this code path, and for
16-bit floats it happens that 1 << 1 and 1 + 1 are both the same).
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190129140411.682-3-peter.maydell@linaro.org
The FCMLA (by element) instruction exists in the
"vector x indexed element" encoding group, but not in
the "scalar x indexed element" group. Correctly UNDEF
the unallocated encodings.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190129140411.682-2-peter.maydell@linaro.org
In the AdvSIMD scalar x indexed element and vector x indexed element
encoding group, the SDOT and UDOT instructions are vector only,
and their opcode is unallocated in the scalar group. Correctly
UNDEF this unallocated encoding.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190125182626.9221-8-peter.maydell@linaro.org
In the encoding groups
* floating-point data-processing (1 source)
* floating-point data-processing (2 source)
* floating-point data-processing (3 source)
* floating-point immediate
* floating-point compare
* floating-ponit conditional compare
* floating-point conditional select
bit 31 is M and bit 29 is S (and bit 30 is 0, already checked at
this point in the decode). None of these groups allocate any
encoding for M=1 or S=1. We checked this in disas_fp_compare(),
disas_fp_ccomp() and disas_fp_csel(), but missed it in disas_fp_1src(),
disas_fp_2src(), disas_fp_3src() and disas_fp_imm().
We also missed that in the fp immediate encoding the imm5 field
must be all zeroes.
Correctly UNDEF the unallocated encodings here.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190125182626.9221-7-peter.maydell@linaro.org
In the "add/subtract (extended register)" encoding group, the "opt"
field in bits [23:22] must be zero. Correctly UNDEF the unallocated
encodings where this field is not zero.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190125182626.9221-6-peter.maydell@linaro.org
In the AdvSIMD load/store single structure encodings, the
non-post-indexed case should have zeroes in [20:16] (which is the
Rm field for the post-indexed case). Bit 31 must also be zero
(a check we got right in ldst_multiple but not here). Correctly
UNDEF these unallocated encodings.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190125182626.9221-5-peter.maydell@linaro.org
In the AdvSIMD load/store multiple structures encodings,
the non-post-indexed case should have zeroes in [20:16]
(which is the Rm field for the post-indexed case).
Correctly UNDEF the currently unallocated encodings which
have non-zeroes in those bits.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190125182626.9221-4-peter.maydell@linaro.org
The PRFM prefetch insn in the load/store with imm9 encodings
requires idx field 0b00; we were underdecoding this by
only checking !is_unpriv (which is equivalent to idx != 2).
Correctly UNDEF the unallocated encodings where idx == 0b01
and 0b11 as well as 0b10.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190125182626.9221-3-peter.maydell@linaro.org
The "system instructions" and "system register move" subcategories
of "branches, exception generating and system instructions" for A64
only apply if bits [23:22] are zero; other values are currently
unallocated. Correctly UNDEF these unallocated encodings.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190125182626.9221-2-peter.maydell@linaro.org
A bug was introduced during a respin of:
commit 57a4a11b2b
target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0
This patch introduced two calls to get_pmceid() during CPU
initialization - one each for PMCEID0 and PMCEID1. In addition to
building the register values, get_pmceid() clears an internal array
mapping event numbers to their implementations (supported_event_map)
before rebuilding it. This is an optimization since much of the logic is
shared. However, since it was called twice, the contents of
supported_event_map reflect only the events in PMCEID1 (the second call
to get_pmceid()).
Fix this bug by moving the initialization of PMCEID0 and PMCEID1 back
into a single function call, and name it more appropriately since it is
doing more than simply generating the contents of the PMCEID[01]
registers.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190123195814.29253-1-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current behavior of v8m_security_lookup in helper.c only checks whether the
IDAU specifies a higher security if the SAU is enabled. If SAU.ALLNS is set to
1, this will lead to addresses being treated as non-secure, even though the
IDAU indicates that they must be secure.
This patch changes the behavior to also check the IDAU if the SAU is currently
disabled.
(This brings the behaviour here into line with the v8M Arm ARM
SecurityCheck() pseudocode.)
Signed-off-by: Thomas Roth <code@stacksmashing.net>
Message-id: CAGGekkuc+-tvp5RJP7CM+Jy_hJF7eiRHZ96132sb=hPPCappKg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added pseudocode ref to the commit message, fixed comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When tsz == 0, aarch32 selects the address space via exclusion,
and there are no "top_bits" remaining that require validation.
Fixes: ba97be9f4a
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190125184913.5970-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This both advertises that we support four counters and enables them
because the pmu_num_counters() reads this value from PMCR.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-13-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The instruction event is only enabled when icount is used, cycles are
always supported. Always defining get_cycle_count (but altering its
behavior depending on CONFIG_USER_ONLY) allows us to remove some
CONFIG_USER_ONLY #defines throughout the rest of the code.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-12-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add arrays to hold the registers, the definitions themselves, access
functions, and logic to reset counters when PMCR.P is set. Update
filtering code to support counters other than PMCCNTR. Support migration
with raw read/write functions.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-11-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit doesn't add any supported events, but provides the framework
for adding them. We store the pm_event structs in a simple array, and
provide the mapping from the event numbers to array indexes in the
supported_event_map array. Because the value of PMCEID[01] depends upon
which events are supported at runtime, generate it dynamically.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-10-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is immediately necessary for the PMUv3 implementation to check
ID_DFR0.PerfMon to enable/disable specific features, but defines the
full complement of fields for possible future use elsewhere.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-8-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an array for PMOVSSET so we only define it for v7ve+ platforms
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-7-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only
return 'true' if the specified counter is enabled and neither prohibited
or filtered.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-5-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because of the PMU's design, many register accesses have side effects
which are inter-related, meaning that the normal method of saving CP
registers can result in inconsistent state. These side-effects are
largely handled in pmu_op_start/finish functions which can be called
before and after the state is saved/restored. By doing this and adding
raw read/write functions for the affected registers, we avoid
migration-related inconsistencies.
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-4-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pmccntr_read and pmccntr_write contained duplicate code that was already
being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to
c15_ccnt in CPUARMState so that we can simultaneously save both the
architectural register value and the last underlying cycle count - this
ensures time isn't lost and will also allow us to access the 'old'
architectural register value in order to detect overflows in later
patches.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-3-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can perform this with fewer operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add 4 attributes that controls the EL1 enable bits, as we may not
always want to turn on pointer authentication with -cpu max.
However, by default they are enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the main crypto routine, an implementation of QARMA.
This matches, as much as possible, ARM pseudocode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-28-richard.henderson@linaro.org
[PMM: fixed minor checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is not really functional yet, because the crypto is not yet
implemented. This, however follows the AddPAC pseudo function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is not really functional yet, because the crypto is not yet
implemented. This, however follows the Auth pseudo function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stripping out the authentication data does not require any crypto,
it merely requires the virtual address parameters.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm_regime_tbi{0,1} functions are replacable with the new function
by giving the lowest and highest address.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use TBID in aa64_va_parameters depending on the data parameter.
This automatically updates all existing users of the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will want to check TBI for I and D simultaneously.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to reuse this from helper-a64.c. Provide a stub
definition for CONFIG_USER_ONLY. This matches the stub
definitions that we removed for arm_regime_tbi{0,1} before.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly want to talk about TBI as it relates to data.
Passing around a pair of variables is less convenient than a
single variable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out functions to extract the virtual address parameters.
Let the functions choose T0 or T1 address space half, if present.
Extract (most of) the control bits that vary between EL or Tx.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-19-richard.henderson@linaro.org
[PMM: fixed minor checkpatch comment nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we could expose stage_1_mmu_idx, the combination is
probably going to be more useful.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pattern
ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false));
is computing the full ARMMMUIdx, stripping off the ARM bits,
and then putting them back.
Avoid the extra two steps with the appropriate helper function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is, or will shortly become, too big to inline.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not that there are any stores involved, but why argue with ARM's
naming convention.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-15-richard.henderson@linaro.org
[fixed trivial comment nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will enable PAuth decode in a subsequent patch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is only used by AArch64. Code movement only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
