AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.
Introduce a new aspeed_intc class with instance_init and realize handlers.
So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.
If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).
Block diagram of GICINT132:
GICINT132
ETH1 +-----------+
+-------->+0 3|
ETH2 | 4|
+-------->+1 5|
ETH3 | 6|
+-------->+2 19| INTC GIC
UART0 | 20| +--------------------------+
+-------->+7 21| | | +--------------+
UART1 | 22| |orgate0 +----> output_pin0+----------->+GIC128 |
+-------->+8 23| | | | |
UART2 | 24| |orgate1 +----> output_pin1+----------->+GIC129 |
+-------->+9 25| | | | |
UART3 | 26| |orgate2 +----> output_pin2+----------->+GIC130 |
+--------->10 27| | | | |
UART5 | 28| |orgate3 +----> output_pin3+----------->+GIC131 |
+-------->+11 29| | | | |
UART6 | +----------->+orgate4 +----> output_pin4+----------->+GIC132 |
+-------->+12 30| | | | |
UART7 | 31| |orgate5 +----> output_pin5+----------->+GIC133 |
+-------->+13 | | | | |
UART8 | OR[0:31] | |orgate6 +----> output_pin6+----------->+GIC134 |
---------->14 | | | | |
UART9 | | |orgate7 +----> output_pin7+----------->+GIC135 |
--------->+15 | | | | |
UART10 | | |orgate8 +----> output_pin8+----------->+GIC136 |
--------->+16 | | | +--------------+
UART11 | | +--------------------------+
+-------->+17 |
UART12 | |
+--------->18 |
| |
| |
| |
+-----------+
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]
Since only root APLICs can have hw IRQ lines, aplic->parent should
be initialized first.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240409014445.278-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the GICv2 specification section 4.3.12, "Interrupt Processor
Targets Registers, GICD_ITARGETSRn":
"Any change to a CPU targets field value:
[...]
* Has an effect on any pending interrupts. This means:
- adding a CPU interface to the target list of a pending interrupt makes that
interrupt pending on that CPU interface
- removing a CPU interface from the target list of a pending interrupt
removes the pending state of that interrupt on that CPU interface."
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Message-id: 20240524113256.8102-3-sebastian.huber@embedded-brains.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the GICv2 specification section 4.3.7, "Interrupt Set-Pending
Registers, GICD_ISPENDRn":
"In a multiprocessor implementation, GICD_ISPENDR0 is banked for each connected
processor. This register holds the Set-pending bits for interrupts 0-31."
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Message-id: 20240524113256.8102-2-sebastian.huber@embedded-brains.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In gic_cpu_read() and gic_cpu_write(), we delegate the handling of
reading and writing the Non-Secure view of the GICC_APR<n> registers
to functions gic_apr_ns_view() and gic_apr_write_ns_view().
Unfortunately we got the order of the arguments wrong, swapping the
CPU number and the register number (which the compiler doesn't catch
because they're both integers).
Most guests probably didn't notice this bug because directly
accessing the APR registers is typically something only done by
firmware when it is doing state save for going into a sleep mode.
Correct the mismatched call arguments.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: 51fd06e0ee ("hw/intc/arm_gic: Fix handling of GICC_APR<n>, GICC_NSAPR<n> registers")
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
[PMM: Rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée<alex.bennee@linaro.org>
adapter_info_so_needed() treats its "opaque" parameter as a S390FLICState,
but the function belongs to a VMStateDescription that is attached to a
TYPE_VIRTIO_CCW_BUS device. This is currently causing a crash when the
user tries to save or migrate the VM state. Fix it by using s390_get_flic()
to get the correct device here instead.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: 9d1b0f5bf5 ("s390_flic: add migration-enabled property")
Message-ID: <20240517061553.564529-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The local APIC is a part of the CPU and has callbacks that are invoked
from multiple accelerators.
The IOAPIC on the other hand is optional, but ioapic_eoi_broadcast is
used by common x86 code to implement the IOAPIC's implicit EOI mode.
Add a stub in case the IOAPIC device is not included but the APIC is.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of mucking with css_migration_enabled(), add a property specific to
the FLIC device, similar to what is done for TYPE_S390_STATTRIB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement IOCSR address space get functions for MIPS/Loongson CPUs.
For MIPS/Loongson without IOCSR (i.e. Loongson-3A1000), get_cpu_iocsr_as
will return as null, and send_ipi_data will fail with MEMTX_DECODE_ERROR,
which matches expected behavior on hardware.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-3-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This device will be shared among LoongArch and MIPS
based Loongson machine, rename it as loongson_ipi
to reflect this nature.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-2-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since cpuid will be checked by ipi_getcpu anyway, there is
no point to enforce MAX_CPU here.
This also saved us from including loongarch board header.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-1-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Let hw/hyperv/hyperv.c and hw/intc/s390_flic.c handle (respectively)
SynIC and adapter routes, removing the code from target-independent
files. This also removes the only occurrence of AdapterInfo outside
s390 code, so remove that from typedefs.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
In vCPU Interface, if the vIRQ has the non-maskable property, report
vINMI to the corresponding vPE.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-23-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In CPU Interface, if the IRQ has the non-maskable property, report NMI to
the corresponding PE.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-22-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If GICD_CTLR_DS bit is zero and the NMI is non-secure, the NMI priority is
higher than 0x80, otherwise it is higher than 0x0. And save the interrupt
non-maskable property in hppi.nmi to deliver NMI exception. Since both GICR
and GICD can deliver NMI, it is both necessary to check whether the pending
irq is NMI in gicv3_redist_update_noirqset and gicv3_update_noirqset.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-21-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement icv_nmiar1_read() for icc_nmiar1_read(), so add definition for
ICH_LR_EL2.NMI and ICH_AP1R_EL2.NMI bit.
If FEAT_GICv3_NMI is supported, ich_ap_write() should consider ICV_AP1R_EL1.NMI
bit. In icv_activate_irq() and icv_eoir_write(), the ICV_AP1R_EL1.NMI bit
should be set or clear according to the Non-maskable property. And the RPR
priority should also update the NMI bit according to the APR priority NMI bit.
By the way, add gicv3_icv_nmiar1_read trace event.
If the hpp irq is a NMI, the icv iar read should return 1022 and trap for
NMI again
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use cs->nmi_support instead of cs->gic->nmi_support]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-20-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the NMIAR CPU interface registers which deal with acknowledging NMI.
When introduce NMI interrupt, there are some updates to the semantics for the
register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it
should return 1022 if the intid has non-maskable property. And for
ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have
non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1
register.
And the APR and RPR has NMI bits which should be handled correctly.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Separate out whether cpuif supports NMI from whether the
GIC proper (IRI) supports NMI]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add GICR_INMIR0 register and support access GICR_INMIR0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-17-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A SPI, PPI or SGI interrupt can have non-maskable property. So maintain
non-maskable property in PendingIrq and GICR/GICD. Since add new device
state, it also needs to be migrated, so also save NMI info in
vmstate_gicv3_cpu and vmstate_gicv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-16-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So far, there is no FEAT_GICv3_NMI support in the in-kernel GIC, so make it
an error to try to set has-nmi=true for the KVM GICv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-id: 20240407081733.3231820-15-ruanjinjie@huawei.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a property has-nmi to the GICv3 device, and use this to set
the NMI bit in the GICD_TYPER register. This isn't visible to
guests yet because the property defaults to false and we won't
set it in the board code until we've landed all of the changes
needed to implement FEAT_GICV3_NMI.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-14-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Augment the GICv3's QOM device interface by adding one
new set of sysbus IRQ line, to signal NMI to each CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-11-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
If the group of the highest priority pending interrupt is disabled
via ICC_IGRPEN*, the ICC_HPPIR* registers should return
INTID_SPURIOUS, not the interrupt ID. (See the GIC architecture
specification pseudocode functions ICC_HPPIR1_EL1[] and
HighestPriorityPendingInterrupt().)
Make HPPIR reads honour the group disable, the way we already do
when determining whether to preempt in icc_hppi_can_preempt().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240328153333.2522667-1-peter.maydell@linaro.org
Currently, QEMU only sets the iforce register to 0 and returns early
when claiming the iforce register. However, this may leave mip.meip
remains at 1 if a spurious external interrupt triggered by iforce
register is the only pending interrupt to be claimed, and the interrupt
cannot be lowered as expected.
This commit fixes this issue by calling riscv_aplic_idc_update() to
update the IDC status after the iforce register is claimed.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240321104951.12104-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Interrupt number in loop sentence should be base irq plus
loop index, it is missing on checking whether the irq
is pending.
Fixes: 428a6ef439 ("Add vmstate post_load support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240313093932.2653518-1-maobibo@loongson.cn>
IOAPICCommonClass implements its own private realize(), and this private
realize() allows error.
Since IOAPICCommonClass.realize() returns void, to check the error,
dereference @errp with ERRP_GUARD().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223085653.1255438-8-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Even if the error is set, the build is not aborted when the ncpus value
is wrong, the return is missing.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 6bf1478543 ("hw/intc/grlib_irqmp: add ncpus property")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308152719.591232-1-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
deliver_bitmask is allocated on the heap in apic_deliver(), but there
are many paths in the function that return before the corresponding
g_free() is reached. Fix this by switching to g_autofree and, while at
it, also switch to g_new. Do the same in apic_deliver_irq() as well
for consistency.
Fixes: b5ee0468e9 ("apic: add support for x2APIC mode", 2024-02-14)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240304224133.267640-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The reads to in_clrip[x] registers return rectified input values of the
interrupt sources.
A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the RISC-V
AIA specification as:
"rectified input value = (incoming wire value) XOR (source is inverted)"
Update the riscv_aplic_read_input_word() implementation to match the above.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The writes to setipnum_le register in APLIC MSI-mode have special
consideration for level-triggered interrupts as-per section "4.9.2
Special consideration for level-sensitive interrupt sources" of the
RISC-V AIA specification.
Particularly, the below text from the RISC-V specification defines
the behaviour of writes to setipnum_le for level-triggered interrupts:
"A second option is for the interrupt service routine to write the
APLIC’s source identity number for the interrupt to the domain’s
setipnum register just before exiting. This will cause the interrupt’s
pending bit to be set to one again if the source is still asserting
an interrupt, but not if the source is not asserting an interrupt."
Fix setipnum_le write emulation for APLIC MSI-mode by implementing
the above behaviour in riscv_aplic_set_pending() function.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When using "--without-default-devices", the ARM_GICV3_TCG and ARM_GIC_KVM
settings currently get disabled, though the arm virt machine is only of
very limited use in that case. This also causes the migration-test to
fail in such builds. Let's make sure that we always keep the GIC switches
enabled in the --without-default-devices builds, too.
Message-ID: <20240221110059.152665-1-thuth@redhat.com>
Tested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now there is an ncpus property, use it in order to deliver the IRQ to
multiple CPU.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-5-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This implements the multiprocessor status register in grlib-irqmp and
bind it to a start signal, which will be later wired in leon3-generic
to start a cpu.
The EIRQ and BA bits are not implemented.
Based on https://gaisler.com/doc/gr712rc-usermanual.pdf, §8.3.5.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-4-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This adds a "ncpus" property to the "grlib-irqmp" device to be used
later, this required a little refactoring of how we initialize the
device (ie: use realize instead of init).
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-3-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split out the headers for each peripherals and move them in their
right hardware directory.
Update Copyright and add SPDX-License-Identifier at the same time.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-2-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
/dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
+Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
=K4b1
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
# w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
# /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
# mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
# +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
# zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
# =K4b1
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits)
MAINTAINERS: Switch to my Enfabrica email
virtio-gpu-rutabaga.c: override resource_destroy method
virtio-gpu.c: add resource_destroy class method
hw/display/virtio-gpu.c: use reset_bh class method
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Standardize all references on CXL r3.1 and minor updates
hw/cxl: Update mailbox status registers.
hw/cxl: Update RAS Capability Definitions for version 3.
hw/cxl: Update link register definitions.
hw/cxl: Update HDM Decoder capability to version 3
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
hw/mem/cxl_type3: Fix potential divide by zero reported by coverity
hw/cxl: Pass NULL for a NULL MemoryRegionOps
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
hw/cxl/mbox: Remove dead code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU populates the apic_state attribute of x86 CPUs if supported by real
hardware or if SMP is active. When handling interrupts, it just checks whether
apic_state is populated to route the interrupt to the PIC or to the APIC.
However, chapter 10.4.3 of [1] requires that:
When IA32_APIC_BASE[11] is 0, the processor is functionally equivalent to an
IA-32 processor without an on-chip APIC.
This means that when apic_state is populated, QEMU needs to check for the
MSR_IA32_APICBASE_ENABLE flag in addition. Implement this which fixes some
real-world BIOSes.
[1] Intel 64 and IA-32 Architectures Software Developer's Manual, Vol. 3A:
System Programming Guide, Part 1
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240106132546.21248-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds support for x2APIC transitions when writing to
MSR_IA32_APICBASE register and finally adds CPUID_EXT_X2APIC to
TCG_EXT_FEATURES.
The set_base in APICCommonClass now returns an integer to indicate error in
execution. apic_set_base return -1 on invalid APIC state transition,
accelerator can use this to raise appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-4-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit extends the APIC ID to 32-bit long and remove the 255 max APIC
ID limit in userspace APIC. The array that manages local APICs is now
dynamically allocated based on the max APIC ID of created x86 machine.
Also, new x2APIC IPI destination determination scheme, self IPI and x2APIC
mode register access are supported.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-3-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit creates apic_register_read/write which are used by both
apic_mem_read/write for MMIO access and apic_msr_read/write for MSR access.
The apic_msr_read/write returns -1 on error, accelerator can use this to
raise the appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-2-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use device_class_set_parent_realize() to set parent realize() directly.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Include missing headers in order to avoid when refactoring
unrelated headers:
hw/intc/xics.c: In function 'icp_realize':
hw/intc/xics.c:304:5: error: unknown type name 'PowerPCCPU'
304 | PowerPCCPU *cpu;
| ^~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
