When operating on the SCIF, process all the received characters, as long
as the FIFO can handle them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When a modifier key is pressed or released, the USB HID keyboard still
answers NAK, unless another key is also pressed or released.
The patch fixes that by calling usb_hid_changed() when a modifier key
is pressed or released.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
floatx80_is_{quiet,signaling}_nan() functions are incorrectly detecting
the type of NaN, depending on SNAN_BIT_IS_ONE, one of the two is
returning the correct value, and the other true for any kind of NaN.
This patch fixes that by applying the same kind of comparison as for
other float formats, but taking into account the explicit bit.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use this for assignment to the low byte or low word of a register.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Load/store reversed (lwr/swr) are insns that endian translate
the sub-word part of the address and byteswap the data lanes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Fix several bugs in NaN handling:
* e in fcmpe* only changes qNaN handling
* FCC is unchanged if an exception is raised
* clear previous FTT before setting it
Reported-by: Mateusz Loskot <mateusz@loskot.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add support for logging the start of instructions in TCG
code debug dumps for ARM targets.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Break the TB after reading the count register. This makes it
possible to take timer interrupts immediately after a read of
a possibly expired timer.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
When reading cp0_count from a timer with a late trigger that should
already have expired, expire it and raise the timer irq.
This makes it possible for guest code (e.g, Linux) that first read
cp0_count, then compare it with cp0_compare and check for raised
timer interrupt lines to run reliably.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reorganize for future patches, no functional change.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
These errors were reported by cppcheck:
[bsd-user/elfload.c:1108]: (error) Common realloc mistake: "syms" nulled but not freed upon failure
[bsd-user/elfload.c:1076]: (error) Memory leak: s
[bsd-user/elfload.c:1079]: (error) Memory leak: syms
v2:
* The previous fix for memory leaks was incomplete (thanks to Peter Maydell for te hint).
* Fix wrong realloc usage, too.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Linux kernel started to use the SM501 2D engine for the console, and
especially the copyrect operation.
Implement this operation so that recent kernels can be used with QEMU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On Windows, this is required to flush the remaining data in the IO stream,
otherwise Gdb do not receive the last packet.
Version 2:
Fix linux-user build error.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
The USB keyboard emulation's translation table in hw/usb-hid.c doesn't
match the codes actually sent for the Logo (a.k.a. "Windows") or Menu
keys. This results in the guest OS not being able to receive these keys
at all when the USB keyboard emulation is being used.
In particular, both the keymap in /usr/share/kvm/keymaps/modifiers and
the evdev table in x_keymap.c map these keys to 0xdb, 0xdc, and 0xdd,
while usb_hid_usage_keys[] seems to be expecting them to be mapped to
0x7d, 0x7e, and 0x7f.
The attached patch seems to fix the problem, at least in my (limited)
testing.
http://bugs.debian.org/578846http://bugs.debian.org/600593 (cloned from the above against different pkg)
https://bugs.launchpad.net/qemu/+bug/584139
Signed-Off-By: Brad Jorsch <anomie@users.sourceforge.net>
Signed-Off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With current OpenBSD, code_gen_buffer was mapped 8GB away from
text segment. Then any helpers were beyond the 2GB range of call
instruction genereated by TCG and so the calls would go nowhere,
leading to a segfault.
Fix by specifying an address for the code_gen_buffer,
hopefully free and nearby the helpers.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix wrong usage of ! and & in MMU related functions. Thanks to Blue
Swirl for reporting the issue.
Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix usage of wrong variable, spotted by clang:
/src/qemu/monitor.c:2278:36: warning: The left operand of '&' is a garbage value
prot = pde & (PG_USER_MASK | PG_RW_MASK |
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ORS=" " adds a blank to the name of the include file.
Some shells (e.g. dash) don't accept input redirection
(tr -d '\r' < $f) when $f ends with a blank, so they
print an error message instead of reading pci.mak.
This is a non-fatal error because pci.mak does not
contain an include line. It was introduced by commit
5d6b423c5c.
Using printf avoids adding a blank and is also supported
by older awk versions (this solution was suggested by
Paolo Bonzini, thank you).
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Tested-by: Andreas Färber <andreas.faerber@web.de>
The MAINTAINERS file was lacking entries concerning the TCG code, add
them based on the git history.
For the common TCG code, is probably better to keep qemu-devel@non-gnu.org
as this code can break easily, so it's better to get it reviewed by a few
persons.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since nobody else seems interested in maintaining MIPS and SH4 targets,
and as I have done most of the recent code changes, let officialize
that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We were not correctly restoring the IT bits when resuming execution
after taking an unexpected exception in the middle of an IT block.
Fix this by tracking them along with PC changes and restoring in
gen_pc_load().
This fixes bug https://bugs.launchpad.net/qemu/+bug/581335
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When invoking a signal handler for an ARM target, make sure the IT
bits in the CPSR are cleared. (This would otherwise cause incorrect
execution if the IT state was non-zero when an exception occured.
This bug has been masked previously because we weren't getting the
IT state bits at exception entry right anyway.)
Also use the proper cpsr_read()/cpsr_write() interface to update
the CPSR rather than manipulating CPUState fields directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Create a new function which does the common sequence of gen_set_condexec,
gen_set_pc_im, gen_exception, set is_jmp to DISAS_JUMP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a redundant call to gen_set_condexec() in the translation of Thumb
mode SWI. (SWI and WFI generate "exceptions" which happen after the
execution of the instruction, ie when PC and IT bits have updated.
So the condexec bits at this point are not correct. However, the code
that handles finishing the translation of the TB will write the correct
value of the condexec bits later, so the only effect was that a conditional
Thumb SWI would generate slightly worse code than necessary.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating, get the user/priv state from the TB flags, not
the CPUState.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
M profile ARM cores don't have a CPSR mode field. Set the bit in the
TB flags that indicates non-user mode correctly for these cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating, the condexec bits for the TB are in the TB flags;
the CPUState condexec bits may be different.
This patch fixes https://bugs.launchpad.net/bugs/604872 where we might
segfault if we took an exception in the middle of a TB with an IT
block, because when we came to retranslate in cpu_restore_state()
the CPUState condexec bits would have advanced compared to the start
of the TB and we would generate different (wrong) code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Thumb/ARM state for the TB being translated should come from
the TB flags, not the CPUState.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating, the VFP vector length and stride for this TB are encoded
in the TB flags; the CPUState copies may be different and must not be used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating code, whether the VFP unit is enabled for this TB
is stored in a bit in the TB flags. Use this rather than incorrectly
reading the FPEXC from the CPUState passed to translation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add symbolic constants for the bitfields we use in the TB flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating the SRS instruction, handle the "store registers
to stack of current mode" case in the helper function rather than
inline. This means the generated code does not make assumptions
about the current CPU mode which might not be valid when the TB
is executed later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VSQRTS always uses the standard FPSCR value as it is a Neon instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support to the ARM helper routines for a second fp_status value
which should be used for operations which the ARM ARM indicates use
"ARM standard floating-point arithmetic" rather than being controlled
by the rounding/flush/NaN settings in the FPSCR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The implementation of the ARM VRSQRTS instruction (which calculates
(3 - op1 * op2) / 2) was missing the division operation. It also
did not handle the special cases of (0,inf) and (inf,0).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a utility function to softfloat to test whether a float32
is zero or denormal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
lsi_ram_read*() and lsi_ram_write*() are not consistent, one uses
leXX_to_cpu() the other uses nothing. As the comment above the RAM
declaration says: "Script ram is stored as 32-bit words in host
byteorder.", remove the leXX_to_cpu() calls.
This fixes the boot of an ARM versatile machine on MIPS and PowerPC
hosts.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
