Finalizing the job may cause its AioContext to change. This is noted by
job_exit(), which points at job_txn_apply() to take this fact into
account.
However, job_completed() does not necessarily invoke job_txn_apply()
(through job_completed_txn_success()), but potentially also
job_completed_txn_abort(). The latter stores the context in a local
variable, and so always acquires the same context at its end that it has
released in the beginning -- which may be a different context from the
one that job_exit() releases at its end. If it is different, qemu
aborts ("qemu_mutex_unlock_impl: Operation not permitted").
Drop the local @outer_ctx variable from job_completed_txn_abort(), and
instead re-acquire the actual job's context at the end of the function,
so job_exit() will release the same.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-2-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Mark the shakti_c machine as not user creatable.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/639
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <c617a04d4e3dd041a3427b47a1b1d5ab475a2edd.1632871759.git.alistair.francis@wdc.com>
At present the codes detect whether the DMA channel is claimed by:
claimed = !!s->chan[ch].control & CONTROL_CLAIM;
As ! has higher precedence over & (bitwise and), this is essentially
claimed = (!!s->chan[ch].control) & CONTROL_CLAIM;
which is wrong, as any non-zero bit set in the control register will
produce a result of a claimed channel.
Fixes: de7c7988d2 ("hw/dma: sifive_pdma: reset Next* registers when Control.claim is set")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210927072124.1564129-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Embed SerialMM in MchpPfSoCMMUartState and QOM-initialize it
- Alias SERIAL_MM 'chardev' property on MCHP_PFSOC_UART
- Forward SerialMM sysbus IRQ in mchp_pfsoc_mmuart_realize()
- Add DeviceReset() method
- Add vmstate structure for migration
- Register device in 'input' category
- Keep mchp_pfsoc_mmuart_create() behavior
Note, serial_mm_init() calls qdev_set_legacy_instance_id().
This call is only needed for backwards-compatibility of incoming
migration data with old versions of QEMU which implemented migration
of devices with hand-rolled code. Since this device didn't previously
handle migration at all, then it doesn't need to set the legacy
instance ID.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210925133407.1259392-4-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our device have 2 different I/O regions:
- a 16550 UART mapped for 32-bit accesses
- 13 extra registers
Instead of mapping each region on the main bus, introduce
a container, map the 2 devices regions on the container,
and map the container on the main bus.
Before:
(qemu) info mtree
...
0000000020100000-000000002010001f (prio 0, i/o): serial
0000000020100020-000000002010101f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020102000-000000002010201f (prio 0, i/o): serial
0000000020102020-000000002010301f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020104000-000000002010401f (prio 0, i/o): serial
0000000020104020-000000002010501f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020106000-000000002010601f (prio 0, i/o): serial
0000000020106020-000000002010701f (prio 0, i/o): mchp.pfsoc.mmuart
After:
(qemu) info mtree
...
0000000020100000-0000000020100fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020100000-000000002010001f (prio 0, i/o): serial
0000000020100020-0000000020100fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020102000-0000000020102fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020102000-000000002010201f (prio 0, i/o): serial
0000000020102020-0000000020102fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020104000-0000000020104fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020104000-000000002010401f (prio 0, i/o): serial
0000000020104020-0000000020104fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020106000-0000000020106fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020106000-000000002010601f (prio 0, i/o): serial
0000000020106020-0000000020106fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-id: 20210925133407.1259392-3-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current MCHP_PFSOC_MMUART_REG_SIZE definition represent the
size occupied by all the registers. However all registers are
32-bit wide, and the MemoryRegionOps handlers are restricted to
32-bit:
static const MemoryRegionOps mchp_pfsoc_mmuart_ops = {
.read = mchp_pfsoc_mmuart_read,
.write = mchp_pfsoc_mmuart_write,
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
Avoid being triskaidekaphobic, simplify by using the number of
registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210925133407.1259392-2-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The category of sifive_uart device is not set. Put it into the
'input' category.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The category of shakti_uart device is not set. Put it into the
'input' category.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The category of ibex_uart device is not set. Put it into the
'input' category.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When V=1, both vsstauts.FS and HS-level sstatus.FS are in effect.
Modifying the floating-point state when V=1 causes both fields to
be set to 3 (Dirty).
However, it's possible that HS-level sstatus.FS is Clean and VS-level
vsstatus.FS is Dirty at the time mark_fs_dirty() is called when V=1.
We can't early return for this case because we still need to set
sstatus.FS to Dirty according to spec.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210921020234.123448-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With the addition of Zb[abcs], we also need to add disassembler
support for these new instructions.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-17-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With everything classified as Zb[abcs] and pre-0.93 draft-B
instructions that are not part of Zb[abcs] removed, we can remove the
remaining support code for RVB.
Note that RVB has been retired for good and misa.B will neither mean
'some' or 'all of' Zb*:
https://lists.riscv.org/g/tech-bitmanip/message/532
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-16-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 1.0.0 version of Zbb does not contain pack/packu/packh. However, a
zext.h instruction is provided (built on pack/packh from pre-0.93
draft-B) is available.
This commit adds zext.h and removes the pack* instructions.
Note that the encodings for zext.h are different between RV32 and
RV64, which is handled through REQUIRE_32BIT.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-15-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 1.0.0 version of Zbb does not contain grev/grevi. Instead, a
rev8 instruction (equivalent to the rev8 pseudo-instruction built on
grevi from pre-0.93 draft-B) is available.
This commit adds the new rev8 instruction and removes grev/grevi.
Note that there is no W-form of this instruction (both a
sign-extending and zero-extending 32-bit version can easily be
synthesized by following rev8 with either a srai or srli instruction
on RV64) and that the opcode encodings for rev8 in RV32 and RV64 are
different.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-14-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With the changes to Zb[abcs], there's some encodings that are
different in RV64 and RV32 (e.g., for rev8 and zext.h). For these,
we'll need a helper macro allowing us to select on RV32, as well.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-13-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 1.0.0 version of Zbb does not contain gorc/gorci. Instead, a
orc.b instruction (equivalent to the orc.b pseudo-instruction built on
gorci from pre-0.93 draft-B) is available, mainly targeting
string-processing workloads.
This commit adds the new orc.b instruction and removed gorc/gorci.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-12-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This reassigns the instructions that are part of Zbb into it, with the
notable exceptions of the instructions (rev8, zext.w and orc.b) that
changed due to gorci, grevi and pack not being part of Zb[abcs].
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-11-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following instructions are part of Zbc:
- clmul
- clmulh
- clmulr
Note that these instructions were already defined in the pre-0.93 and
the 0.93 draft-B proposals, but had not been omitted in the earlier
addition of draft-B to QEmu.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-10-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following instructions are part of Zbs:
- b{set,clr,ext,inv}
- b{set,clr,ext,inv}i
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-9-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zb[abcs] ratification package does not include the proposed
shift-one instructions. There currently is no clear plan to whether
these (or variants of them) will be ratified as Zbo (or a different
extension) or what the timeframe for such a decision could be.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-8-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zbs 1.0.0 (just as the 0.93 draft-B before) does not provide for W-form
instructions for Zbs (single-bit instructions). Remove them.
Note that these instructions had already been removed for the 0.93
version of the draft-B extention and have not been present in the
binutils patches circulating in January 2021.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-7-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following instructions are part of Zba:
- add.uw (RV64 only)
- sh[123]add (RV32 and RV64)
- sh[123]add.uw (RV64-only)
- slli.uw (RV64-only)
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-6-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The bitmanipulation ISA extensions will be ratified as individual
small extension packages instead of a large B-extension. The first
new instructions through the door (these have completed public review)
are Zb[abcs].
This adds new 'x-zba', 'x-zbb', 'x-zbc' and 'x-zbs' properties for
these in target/riscv/cpu.[ch].
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-5-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Assume clzw being executed on a register that is not sign-extended, such
as for the following sequence that uses (1ULL << 63) | 392 as the operand
to clzw:
bseti a2, zero, 63
addi a2, a2, 392
clzw a3, a2
The correct result of clzw would be 23, but the current implementation
returns -32 (as it performs a 64bit clz, which results in 0 leading zero
bits, and then subtracts 32).
Fix this by changing the implementation to:
1. shift the original register up by 32
2. performs a target-length (64bit) clz
3. return 32 if no bits are set
Marking this instruction as 'w-form' (i.e., setting ctx->w) would not
correctly model the behaviour, as the instruction should not perform
a zero-extensions on the input (after all, it is not a .uw instruction)
and the result is always in the range 0..32 (so neither a sign-extension
nor a zero-extension on the result will ever be needed). Consequently,
we do not set ctx->w and mark the instruction as EXT_NONE.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
Message-id: 20210911140016.834071-4-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The refactored gen_clzw() uses ret as its argument, instead of arg1.
Fix it.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210911140016.834071-3-philipp.tomsich@vrull.eu
Fixes: 6090391505 ("target/riscv: Add DisasExtend to gen_unary")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Following the recent changes in translate.c, gen_add_uw() causes
failures on CF3 and SPEC2017 due to the reuse of arg1. Fix these
regressions by introducing a temporary.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210911140016.834071-2-philipp.tomsich@vrull.eu
Fixes: 191d1dafae ("target/riscv: Add DisasExtend to gen_arith*")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Change from Philippe - Remove unused TCG temp
Change from Taylor - Probe the stores in a packet at start of commit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJhXcRNAAoJEHsCRPsS3kQitBkH/0en3UJ5FYZVMbdhZW8UEsY7
Pg9I4zcLCwGWBnUSkhgdJbzjQPRDAs5rGl+fVswLrjjvtHE/528Yn4B+31s+GDwK
Ofz5RlwTM1rVfh/NW2PMhY97+/VUakH6lS6bEmcXyTmtwWx9OciEvxn8KblVENNG
a3F82cByh+G91Gw6n1fXER/Ksebtq22Cu/O3f8PAZU5UqqEbGoxStTptstG6BEDR
vPS2PBROn4S9W4YPjUUXds+RoW53TV1c/cdkAvWwa8bC2q/LJS3JqaoG9eaSQgkd
S3XObETATgaXdByXmqUYaioWsgRevRtEct44RZxG6e8qmyFuvEcLqTlDi8qqYl0=
=bmyK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20211006' into staging
Change from Philippe - Use tcg_constant_*
Change from Philippe - Remove unused TCG temp
Change from Taylor - Probe the stores in a packet at start of commit
# gpg: Signature made Wed 06 Oct 2021 08:44:13 AM PDT
# gpg: using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* remotes/quic/tags/pull-hex-20211006:
target/hexagon: Use tcg_constant_*
target/hexagon: Remove unused TCG temporary from predicated loads
Hexagon (target/hexagon) probe the stores in a packet at start of commit
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace uses of tcg_const_* with the allocate and free close together.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003004750.3608983-3-f4bug@amsat.org>
The gen_pred_cancel() function, introduced in commit a646e99cb9
(Hexagon macros) doesn't use the 'one' TCG temporary; remove it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003004750.3608983-2-f4bug@amsat.org>
When a packet has 2 stores, either both commit or neither commit.
At the beginning of gen_commit_packet, we check for multiple stores.
If there are multiple stores, call a helper that will probe each of
them before proceeding with the commit.
Note that we don't call the probe helper for packets with only one
store. Therefore, we call process_store_log before anything else
involved in committing the packet.
We also fix a typo in the comment in process_store_log.
Test case added in tests/tcg/hexagon/hex_sigsegv.c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1633036599-7637-1-git-send-email-tsimpson@quicinc.com>
- Fix I/O errors because of incorrectly detected max_iov
- Fix not white-listed copy-before-write
- qemu-storage-daemon: Only display FUSE help when FUSE is built-in
- iotests: update environment and linting configuration
-----BEGIN PGP SIGNATURE-----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=Azhw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kwolf/tags/for-upstream' into staging
Block layer patches
- Fix I/O errors because of incorrectly detected max_iov
- Fix not white-listed copy-before-write
- qemu-storage-daemon: Only display FUSE help when FUSE is built-in
- iotests: update environment and linting configuration
# gpg: Signature made Wed 06 Oct 2021 03:58:10 AM PDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* remotes/kwolf/tags/for-upstream:
iotests: Update for pylint 2.11.1
iotests/migrate-bitmaps-test: delint
iotests/mirror-top-perms: Adjust imports
iotests/linters: check mypy files all at once
iotests: add 'qemu' package location to PYTHONPATH in testenv
block: introduce max_hw_iov for use in scsi-generic
iotests/image-fleecing: declare requirement of copy-before-write
block: bdrv_insert_node(): don't use bdrv_open()
block: bdrv_insert_node(): doc and style
block: bdrv_insert_node(): fix and improve error handling
block: implement bdrv_new_open_driver_opts()
qemu-storage-daemon: Only display FUSE help when FUSE is built-in
include/block.h: remove outdated comment
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
1. Ignore the new f-strings warning, we're not interested in doing a
full conversion at this time.
2. Just mute the unbalanced-tuple-unpacking warning, it's not a real
error in this case and muting the dozens of callsites is just not
worth it.
3. Add encodings to read_text().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-7-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mostly uninteresting stuff. Move the test injections under a function
named main() so that the variables used during that process aren't in
the global scope.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-6-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to import subpackages from the qemu namespace package; importing
the namespace package alone doesn't bring the subpackages with it --
unless someone else (like iotests.py) imports them too.
Adjust the imports.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-5-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can circumvent the '__main__' redefinition problem by passing
--scripts-are-modules. Take mypy out of the loop per-filename and check
everything in one go: it's quite a bit faster.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-4-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can drop the sys.path hacking in various places by doing
this. Additionally, by doing it in one place right up top, we can print
interesting warnings in case the environment does not look correct. (See
next commit.)
If we ever decide to change how the environment is crafted, all of the
"help me find my python packages" goop is all in one place, right in one
function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-2-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now test fails if copy-before-write is not white-listed.
Let's skip test instead.
Fixes: c060598569
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210920115538.264372-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use bdrv_new_open_driver_opts() instead of complicated bdrv_open().
Among other extra things bdrv_open() also check for white-listed
formats, which we don't want for internal node creation: currently
backup doesn't work when copy-before-write filter is not white-listed.
As well block-stream doesn't work when copy-on-read is not
white-listed.
Fixes: 751cec7a26
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2004812
Reported-by: Yanan Fu
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210920115538.264372-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- options & flags is common pair for open-like functions, let's use it
- add a comment that specifies use of @options
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210920115538.264372-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- use ERRP_GUARD(): function calls error_prepend(), so it must use
ERRP_GUARD(), otherwise error_prepend() would not be called when
passed errp is error_fatal
- drop error propagation, handle return code instead
- for symmetry, do error_prepend() for the second failure
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210920115538.264372-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add version of bdrv_new_open_driver() that supports QDict options.
We'll use it in further commit.
Simply add one more argument to bdrv_new_open_driver() is worse, as
there are too many invocations of bdrv_new_open_driver() to update
then.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210920115538.264372-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When configuring QEMU with --disable-fuse, the qemu-storage-daemon
still reports FUSE command line options in its help:
$ qemu-storage-daemon -h
Usage: qemu-storage-daemon [options]
QEMU storage daemon
--export [type=]fuse,id=<id>,node-name=<node-name>,mountpoint=<file>
[,growable=on|off][,writable=on|off]
export the specified block node over FUSE
Remove this help message when FUSE is disabled, to avoid:
$ qemu-storage-daemon --export fuse
qemu-storage-daemon: --export fuse: Invalid parameter 'fuse'
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210816180442.2000642-1-philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are a couple of errors in bdrv_drained_begin header comment:
- block_job_pause does not exist anymore, it has been replaced
with job_pause in b15de82867
- job_pause is automatically invoked as a .drained_begin callback
(child_job_drained_begin) by the child_job BdrvChildClass struct
in blockjob.c. So no additional pause should be required.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210903113800.59970-1-eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The unsigned saturations are handled via generic code
using min/max. The signed saturations are expanded using
double-sized arithmetic and a saturating pack.
Since all operations are done via expansion, do not
actually set TCG_TARGET_HAS_sat_vec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
