the usb-hid spec states that the SET_IDLE request has a 16bit value,
where the upper byte specifies the idle rate (currently unimplemented,
we handle only the 0 case, meaning infinite duration) and the lower
byte specifies the report id (0 means all reports).
In our code we do idle = value, while it should be idle = "upper byte",
especially if the guest issues a GET_IDLE, we should return only the
idle rate while we are returning only the report id.
In practice it doesn't make much difference because I have only seen
SET_VALUE with both bytes set to 0 so far, but still it is wrong.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6211 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6209 c046a42c-6fe2-441c-8c8c-71466251a162
* Process out channels immediately when the channel is started.
* Context descriptor load does not start a channel.
* Store updated descriptors after processing them regardless of eol state.
* Correct control-register area size.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6208 c046a42c-6fe2-441c-8c8c-71466251a162
Cannot believe this bug has been around for so long.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6207 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6206 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6202 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6197 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6196 c046a42c-6fe2-441c-8c8c-71466251a162
The vga reset handler overwrites some cirrus registers, causing reboots
to corrupt cirrus state to the point that guests can only bring up 640x480
resolutions.
Fix by adding a dedicated cirrus reset handler (which calls the common vga
handler).
Signed-off-by: Avi Kivity <avi@redhat.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6191 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
Attached patch implements DMA support to RC4030 chipset and simplifies
jazz IO part (at 0xf0000000), where registers contain 16 bit values.
Config register has not a clear meaning (only one value is always valid,
and sometimes another one), so use a magic value instead.
The patch also wires DMA transfers for the SCSI adapter in the Jazz
emulation (Mips Magnum 4000 and Acer Pica 61).
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6145 c046a42c-6fe2-441c-8c8c-71466251a162
Change from v1:
Avoid changing the existing coding style in certain files.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6120 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6101 c046a42c-6fe2-441c-8c8c-71466251a162
The Command register in the PCI config space has some read-only bits.
Any writes to those bits should be masked out.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6092 c046a42c-6fe2-441c-8c8c-71466251a162
The Status register in the PCI config space has some read-only bits.
Any writes to those bits should be masked out.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6091 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds HPET emulation. It can be disabled with -disable-hpet. An hpet
provides a more finely granular clocksource than otherwise available on PC.
This means that latency-dependent applications (e.g. multimedia) will generally
be smoother when using the HPET.
Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6081 c046a42c-6fe2-441c-8c8c-71466251a162
Reset a PC and tell BIOS that resume from ram is required on the next boot.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6080 c046a42c-6fe2-441c-8c8c-71466251a162
This was spotted by malc
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6075 c046a42c-6fe2-441c-8c8c-71466251a162
This adds virtio-net support. This is based on the virtio-net driver
that exists in kvm-userspace. This also adds a new qemu_sendv_packet
which virtio-net requires.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6073 c046a42c-6fe2-441c-8c8c-71466251a162
Since most IO devices are integrated into the 440EP chip, "Bamboo support"
mostly entails implementing the -kernel, -initrd, and -append options.
These options are implemented by loading the guest as if u-boot had done it,
i.e. loading a flat device tree, updating it to hold initrd addresses, ram
size, and command line, and passing the FDT address in r3.
Since we use it with KVM, we enable the virtio block driver and include hooks
necessary for KVM support.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6067 c046a42c-6fe2-441c-8c8c-71466251a162
Wire up the system-on-chip devices present on 440EP chips.
This patch is a little unusual in that qemu doesn't actually emulate the 440
core, but we use this board code with KVM (which does). If/when 440 core
emulation is supported, the kvm_enabled() hack can be removed.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6066 c046a42c-6fe2-441c-8c8c-71466251a162
The 4xx SDRAM controller supports a small number of banks, and each bank must
be one of a small set of sizes. The number of banks and the supported sizes
varies by SoC.
This function uses the user-specified RAM size to fill in the "ram_bases" and
"ram_sizes" arrays required by ppc4xx_sdram_init().
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6063 c046a42c-6fe2-441c-8c8c-71466251a162
The SDRAM controller is shared across almost all 405 and 440 embedded
processors, with some slight differences such as the sizes supported for each
memory bank.
Rename only; no functional changes.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6062 c046a42c-6fe2-441c-8c8c-71466251a162
The SDRAM controller is shared across almost all 405 and 440 embedded
processors, with some slight differences such as the sizes supported for each
memory bank.
Code movement only; no functional changes.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6061 c046a42c-6fe2-441c-8c8c-71466251a162
The TSC2102 chip is not included in documentation because a patch is
pending.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6038 c046a42c-6fe2-441c-8c8c-71466251a162
I'm not familiar with this device, but I'm fairly certain the writel handler is
not supposed to recurse.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5995 c046a42c-6fe2-441c-8c8c-71466251a162
Use the defines added by the previous patch in the virtio drivers.
Also remove the pointless vendor and device args from the
virtio_blk_init() function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5987 c046a42c-6fe2-441c-8c8c-71466251a162
This sets a default PCI subsystem ID for all emulated PCI devices. PCI
specs require this, so do it.
In many cases it is enougth to know the PCI ID to handle a device
correctly. Sometimes a device driver must identify the exact piece of
hardware (via PCI Subsystem ID) though.
What does this patch to qemu devices:
Right now the emulated PCI devices have no PCI subsystem ID, only the
PCI ID. The discussed patch sets a default PCI subsystem ID for all
emulated devices. Which will make the qemu devices look pretty much
like in the laptop case: all PCI subsystem IDs will point to qemu by
default.
If a driver emulates a very specific piece of hardware where it has to
emulate more than just the PCI chip, it can overwrite the PCI subsystem
ID without problems. The es1370 driver does that for example.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5986 c046a42c-6fe2-441c-8c8c-71466251a162
Fix compiler warning on OSX, reported by Andreas Faerber.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5982 c046a42c-6fe2-441c-8c8c-71466251a162
fw_cfg_add_callback() checks if key has FW_CFG_WRITE_CHANNEL bit set
after masking the key with FW_CFG_ENTRY_MASK.
But as FW_CFG_ENTRY_MASK is ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL),
the bit is never set and function exits.
This patch corrects this by checking the bit before masking the value.
Signed-by-off: Laurent Vivier <Laurent.Vivier@bull.net>
Acked-by: Gleb Natapov <gleb@redhat.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5978 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds support for 64-bit Block Move instructions. There are multiple
modes for 64-bit Block moves, direct, indirect, and table indirect. This patch
implements Direct and Table indirect moves which are needed by 64-bit windows
and SYM_CONF_DMA_ADDRESSING_MODE=2 for the Linux sym53c8xx_2 driver respectively.
Two helper functions are included to check which mode the guest is using. For
64-bit direct moves, we fetch a 3rd DWORD and store the value in the DBMS
register. For Table Indirect moves, we look into the table for which register
contains the upper 32-bits of the 64-bit address. This selector value indicates
which register to pull the value from and into dnad64 register.
Finally, lsi_do_dma is updated to use the approriate register to build a 64-bit
DMA address if required.
With this patch, Windows XP x64, 2003 SP2 x64, can now install to scsi devices.
Linux SYM_CONF_DMA_ADDRESSING_MODE=2 need a quirk fixup in Patch 4 to function
properly.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5969 c046a42c-6fe2-441c-8c8c-71466251a162
Current implementation of memory-mapped i8042 controller is atm
implemented with an interface shift (it_shift) parameter, like most all
memory-mapped devices in Qemu.
However, this isn't suitable for MIPS Magnum, where i8042 controller is at
0x80005000 up to 0x80005fff.
Thomas Bogendoerfer (from #mipslinux) tested the behaviour of a real
machine, and found that odd addresses are for status/command register, and
even addresses for data register.
Attached patch implements this behaviour by replacing the it_shift
parameter by a mask one.
Incidentally, keyboard now works on OpenBSD 2.3, which accesses i8042
controller at 0x80005060 and 0x80005061.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5962 c046a42c-6fe2-441c-8c8c-71466251a162
MMIO exits are more expensive in KVM or Xen than in QEMU because they
involve, at least, privilege transitions. However, MMIO write
operations can be effectively batched if those writes do not have side
effects.
Good examples of this include VGA pixel operations when in a planar
mode. As it turns out, we can get a nice boost in other areas too.
Laurent mentioned a 9.7% performance boost in iperf with the coalesced
MMIO changes for the e1000 when he originally posted this work for KVM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5961 c046a42c-6fe2-441c-8c8c-71466251a162
Attached patch adds a reset handler to parallel port, so it gets correct
register values after a reset.
(Hervé Poussineau)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5942 c046a42c-6fe2-441c-8c8c-71466251a162
This patch simply implement one register of SH4's SCI := Serial Communication Interface.
R2D evaluation board uses SCI for SPI connection. So, Linux kernel for R2D with
default configuration causes a QEMU assertion failure when it initializes SPI driver.
This patch avoids it and reduces the kernel config modification work for QEMU.
Completing SCI implementation task is left. Other board support is desirable to confirm
this task, which uses SCI for a serial terminal.
(Shin-ichiro KAWASAKI)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5939 c046a42c-6fe2-441c-8c8c-71466251a162
Main purpose of this is to delete
*physical = address & 0x1fffffff;
at target-sh4/helper.c:449, using new mmio rule introduced by #5849
This masking is a nice trick to realize P4/A7 duality of SH registers.
But, IMHO, it is logically wrong.
Most of SH4 cpu control registers in P4 area(0xfc000000...0xffffffff) have
one more address called A7 which is usually P4 address with upper 3bits masked.
This is an address only appears in TLB's physical address part.
Current code use trick writing drivers as if they are really in A7
(that's why you see many *_A7 in hw/sh*.c), and using translation P4 to A7.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5935 c046a42c-6fe2-441c-8c8c-71466251a162
Fixes to be needed for commit #5849 "Change MMIO callbacks..."
hw/sh7750.c:
- Divide region of CPU control registers to avoid overlapping
to peripheral modules.
- Delete unused var "icr", which had moved to hw/sh_intc.c.
hw/sm501.c:
- Merge non page aligned palette registers into the region of
control registers.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5934 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds pci support to sh/r2d board.
This is the first user of PCIC support I formerly sent.
PCIC actually is inside of chip with CPU core on SH7751.
But, this code is written as if SH7750 and PCIC are on board.
I care little about physical device boundary, but fitting with qemu's
design.
This patch also adds some BSC (Bus State Controller) registers,
because PCI device driver software have to accesses them.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5932 c046a42c-6fe2-441c-8c8c-71466251a162
This adds IRQ controller in FPGA on r2d, and use it for CF.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5926 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds IRL(4bit encoded 15 level interrupt input) support
to SH using qemu_irq as a multi level (!=on/off) signal.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5925 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds emulation for a CompactFlash on sh4/r2d board.
The device is CF, but wired to be worked as True-IDE mode, and connected
directly to SH bus. So, this code is to support generally mmio based
IDEs which are supported by "pata_platform" driver in linux kernel.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5924 c046a42c-6fe2-441c-8c8c-71466251a162
Openserver 5.0.5 sends an Inquiry command to the emulated SCSI disk
expecting a response length of 40 bytes. Currently the response to an
Inquiry command is hardcoded to 36 bytes. When receiving a response of
length 36 instead of 40 Openserver panics.
Modifications to original patch based on feedback from Ryan Harper and Paul
Brook. Thanks guys.
Signed-off-by: Justin Chevrier <address@hidden>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5903 c046a42c-6fe2-441c-8c8c-71466251a162
Basically after each DMA transfer the Openserver driver would issue an
empty (0) SCRIPTS opcode. As the opcode is essentially a NOP it has no
second DWORD and therefore the DSP should only be incremented by 4 bytes
instead of the 8 bytes we currently do.
Here's a snippet of the log:
lsi_scsi: Data ready tag=0x100d9 len=16384
...
lsi_scsi: SCRIPTS dsp=068c5e50 opcode 01000400 arg 07a09000
lsi_scsi: DMA addr=0x07a09000 len=1024
lsi_scsi: SCRIPTS dsp=068c5e58 opcode 00000000 arg 01000400
lsi_scsi: Wrong phase got 1 expected 0
Note the 2nd DWORD after the empty opcode; the next opcode in the DMA
transfer sequence. As can be expected the address after that has the next
DMA address to use.
After the attached patch the DMA transfer is able to complete successfully:
lsi_scsi: SCRIPTS dsp=068c5e50 opcode 01000400 arg 07a0d000
lsi_scsi: DMA addr=0x07a0d000 len=1024
lsi_scsi: SCRIPTS dsp=068c5e5c opcode 01000400 arg 07a0d400
lsi_scsi: DMA addr=0x07a0d400 len=1024
...
Tested againsted Openserver 5.0.5 and Debian ARM.
Signed-off-by: Justin Chevrier <address@hidden>
Acked-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5902 c046a42c-6fe2-441c-8c8c-71466251a162
This way the registers will only be visible at the given offset instead of
every 0x100 bytes.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5899 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5898 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5897 c046a42c-6fe2-441c-8c8c-71466251a162
Vectored IO APIs will require some sort of vector argument. It makes sense to
use struct iovec and just define it globally for Windows.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5889 c046a42c-6fe2-441c-8c8c-71466251a162
For backward operations, dstpitch and srcpitch can
be negative. This leads BLTUNSAFE macro into an
overflow, and as a result, it avoids performing
operations that are perfectly valid.
The visible effect that led to that patch was the gnome-panel
bar in Fedora10. Before this patch, you could see garbage
clobbering a big portion of the bar.
After this patch, this garbage is gone.
Signed-off-by: Glauber Costa <glommer@redhat.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5880 c046a42c-6fe2-441c-8c8c-71466251a162
qemu_get_clock() returns a structure containing the time the user wants
to be set (either UTC time, a local time, or a given date). Use mktimegm()
instead of mktime() to convert it into POSIX time without taking the host
timezone into account.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5878 c046a42c-6fe2-441c-8c8c-71466251a162
Windows does not have sys/uio.h and does not have err.h.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5877 c046a42c-6fe2-441c-8c8c-71466251a162
...and fix a bug, the implementation in hw/apic.c was wrong.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5876 c046a42c-6fe2-441c-8c8c-71466251a162
This adds a VirtIO based balloon driver. It uses madvise() to actually balloon
the memory when possible.
Until 2.6.27, KVM forced memory pinning so we must disable ballooning unless the
kernel actually supports it when using KVM. It's always safe when using TCG.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5874 c046a42c-6fe2-441c-8c8c-71466251a162
TARGET_PAGE_SIZE should only be used internal to qemu, not in guest/host
interfaces. The virtio frontend code in Linux uses two constants (PFN shift
and vring alignment) for the interface, so update qemu to match.
I've tested this with PowerPC KVM and confirmed that it fixes virtio problems
when using non-TARGET_PAGE_SIZE pages in the guest.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5871 c046a42c-6fe2-441c-8c8c-71466251a162
Virtio-blk is a paravirtual block device based on VirtIO. It can be used by
specifying the if=virtio parameter to the -drive parameter.
When using -enable-kvm, it can achieve very good performance compared to IDE or
SCSI.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5870 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds core support for VirtIO. VirtIO is a paravirtualization
framework that has been in Linux since 2.6.21. A PCI transport has been
available since 2.6.25. Network drivers are also available for Windows.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5869 c046a42c-6fe2-441c-8c8c-71466251a162
This PCI controller can be found on a number of 4xx SoCs, including the 440EP.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5862 c046a42c-6fe2-441c-8c8c-71466251a162
When command is not DMA, TCMID and TCLO registers are not filled. Use command buffer len instead
Signed-off-by: Herve Poussineau <hpoussin@reactos.org>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5813 c046a42c-6fe2-441c-8c8c-71466251a162
According to http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt,
"Any bit pattern written to this register may be read back and should be identical"
Signed-off-by: Herve Poussineau <hpoussin@reactos.org>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5812 c046a42c-6fe2-441c-8c8c-71466251a162
- Fix internal fifo size (16 bytes), according to http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
- Fix values of STAT_MI and STAT_MO
- Give a scsi ID to adapter, and prevent this ID to be used by devices
- Prevent fifo overrun in esp_mem_writeb
- Add a ESP_ERROR macro, and use it where appropriate
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5811 c046a42c-6fe2-441c-8c8c-71466251a162
Virtio will want to use the geometry detection code. It doesn't belong
in ide.c anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5797 c046a42c-6fe2-441c-8c8c-71466251a162
Hypervisors like KVM perform badly while doing mmio on
a loop, because it'll generate an exit on each access.
This is the case with VGA, which results in very bad
performance.
In this patch, we map the linear frame buffer as RAM,
make sure it has dirty region tracking enabled, and then
just let the region to be written.
Cleanups suggestions by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5793 c046a42c-6fe2-441c-8c8c-71466251a162
It'll be reused later by the vga optimization.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5791 c046a42c-6fe2-441c-8c8c-71466251a162
unsigned long is too bad of a type. Use ram_addr_t instead.
aligurori: fixed a compile warning in this patch
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5790 c046a42c-6fe2-441c-8c8c-71466251a162
This patches makes SH serial emulation use qemu_irq in its interface.
* hw/sh.h (sh_serial_init): Take qemu_irq, not intc_source.
* hw/sh7750.c (sh7750_init): Adjust.
* hw/sh_intc.c (sh_intc_set_irq): Don't assert or deassert
irq more than once.
* hw/sh_serial.c (sh_serial_state): Use qemu_irq, not intc_source.
(sh_serial_clear_fifo, sh_serial_ioport_write)
(sh_serial_receive_byte): Adjust.
(sh_serial_init): Take qemu_irq, not intc_source.
(Vladimir Prus)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5769 c046a42c-6fe2-441c-8c8c-71466251a162
We're currently ignoring the e1000 VLAN tagging, stripping and filtering
features in the e1000 emulation. This patch adds backing for the
relevant registers and provides a software implementation of the
acceleration, such that a guest can make use of VLANs.
This is mostly (only?) useful for a guest on a bridge (not user mode
networking). The only caveat beyond that is that you need to make sure
the host NIC isn't doing it's own tagging, stripping, or filtering.
This generally means the host NIC on the bridge should not be part of a
VLAN.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5766 c046a42c-6fe2-441c-8c8c-71466251a162
u-boot is a firmware. uImage is an executable file format.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5764 c046a42c-6fe2-441c-8c8c-71466251a162
Return the base address at which the image was loaded so that callers may keep
track of currently occupied guest memory.
This will be required by the PPC 440 embedded code to avoid hard coding a
device model/initrd location. Other users of this function could make use of
this parameter to avoid hard coding these locations in the future too.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5763 c046a42c-6fe2-441c-8c8c-71466251a162
TARGET_FMT_plx includes a % for you. This fixes the following warning when
compiling with LSI_DEBUG enabled.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5760 c046a42c-6fe2-441c-8c8c-71466251a162
This patch tweaks the ATAPI CDROM emulation to fix an annoyance seen
when running a variety of Linux guests: the desktop GUI shows a CDROM
device as present, but is unable to automount the media and display its
contents.
The patch adds the PLAY_AUDIO capability bit to the data returned by
MODE_SENSE commands. That convinces the guest kernel to determine what
kind of media is present.
Arguably Linux could be smarter about this, but it's my guess there are
few (if any) hardware CDROM drives that don't set the bit, and there are
a large number of Linux distros that exhibit this problem.
Signed-off-by: Gary Grebus <ggrebus@virtualiron.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5752 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes Linux machines configured with > 4G of ram and using a
SCSI device.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5750 c046a42c-6fe2-441c-8c8c-71466251a162
Avoid scheduling DMA processing when all channels are stopped or at
end-of-list.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5720 c046a42c-6fe2-441c-8c8c-71466251a162
drive_get_index() returns -1 if a drive isn't found; don't
use -1 to index drives_table.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5719 c046a42c-6fe2-441c-8c8c-71466251a162
malc found AIX headers leak "hz" and so it can't be used there. Change
the occurences in hw/.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5709 c046a42c-6fe2-441c-8c8c-71466251a162
After going through the debug log and scratching my head for quite some
time. I found the following:
The problem was with this block move:
lsi_scsi: SCRIPTS dsp=0fae8e50 opcode 01000028 arg 00f63c40
lsi_scsi: DMA addr=0x00f63c40 len=36
The number of bytes to be transferred (len) should be 40 which corresponds
to the block transfer of length 0x28 (from opcode 01000028). Instead we
have a length of 36 (0x24). The code responsible for this is (in
'lsi_do_dma'):
if (count > s->current_dma_len)
count = s->current_dma_len;
Basically we're overwriting the length 40 with the value 36 which I
think we just left over in that variable from an earlier transfer. In my
patch below I initialize s->current_dma_len to s->dbc before we begin
the DMA transfer during Data In phase.
The attached patch gets Openserver 5.0.5 past the hardware detection
(and it lists the hard drive to boot, woohoo). It appears to stop a
little while later (doesn't seem SCSI related), but it's been so long since
I've booted Openserver I'm not sure what's supposted to happen after the HW
detection using the boot/root disks.
Props go to Craig Ringer for the initial post and the code that he posted
some of which is in this patch.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5706 c046a42c-6fe2-441c-8c8c-71466251a162
Windows only flushes its cache of a CDROM if it gets a
SENSE_UNIT_ATTENTION CHECK_CONDITION response to a REQUEST_SENSE
command.
Make sure it does so after we change the CD.
Tab damage fixed by Anthony Liguori
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Steven Smith <steven.smith@citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5698 c046a42c-6fe2-441c-8c8c-71466251a162
KVM's live migration support included support for exec: URLs, allowing system
state to be written or received via an arbitrary popen()ed subprocess. This
provides a convenient way to pipe state through a compression algorithm or an
arbitrary network transport on its way to its destination, and a convenient way
to write state to disk; libvirt's qemu driver currently uses migration to exec:
targets for this latter purpose.
This version of the patch refactors now-common code from migrate-tcp.c into
migrate.c.
Signed-off-by: Charles Duffy <Charles_Duffy@messageone.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5694 c046a42c-6fe2-441c-8c8c-71466251a162
Also optimise qemu_strdup by using memcpy - using pstrcpy is usually
suboptimal.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5653 c046a42c-6fe2-441c-8c8c-71466251a162
The use of strncat and strndup was correct, pstrcpy and pstrdup wasn't.
I'll try to restore building on non-gnu OSes in a later commit.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5651 c046a42c-6fe2-441c-8c8c-71466251a162
Generate an option rom instead of using a hijacked boot sector for kernel
booting. This just requires adding a small option ROM header and a few more
instructions to the boot sector to take over the int19 vector and run our
boot code.
A disk is no longer needed when using -kernel on x86.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5650 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds minimum emulation of SM501 multifunction device,
whose main feature is 2D graphics. It is one of the peripheral
of R2D, the SH4 evaluation board. We can see TUX printed on the
QEMU console.
Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5632 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds very basic KVM support. KVM is a kernel module for Linux that
allows userspace programs to make use of hardware virtualization support. It
current supports x86 hardware virtualization using Intel VT-x or AMD-V. It
also supports IA64 VT-i, PPC 440, and S390.
This patch only implements the bare minimum support to get a guest booting. It
has very little impact the rest of QEMU and attempts to integrate nicely with
the rest of QEMU.
Even though this implementation is basic, it is significantly faster than TCG.
Booting and shutting down a Linux guest:
w/TCG: 1:32.36 elapsed 84% CPU
w/KVM: 0:31.14 elapsed 59% CPU
Right now, KVM is disabled by default and must be explicitly enabled with
-enable-kvm. We can enable it by default later when we have had better
testing.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5624 c046a42c-6fe2-441c-8c8c-71466251a162
