A subsystem vendor ID of zero isn't allowed, so we use our
default ID.
Gerd points out that although the PCI subsystem vendor ID is
treated by the guest as the virtio vendor ID:
/* we use the subsystem vendor/device id as the virtio vendor/device
* id. this allows us to use the same PCI vendor/device id for all
* virtio devices and to identify the particular virtio driver by
* the subsytem ids */
vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
vp_dev->vdev.id.device = pci_dev->subsystem_device;
it looks like only the device ID is used right now:
# grep virtio modules.alias
alias virtio:d00000001v* virtio_net
alias virtio:d00000002v* virtio_blk
alias virtio:d00000003v* virtio_console
alias virtio:d00000004v* virtio-rng
alias virtio:d00000005v* virtio_balloon
alias pci:v00001AF4d*sv*sd*bc*sc*i* virtio_pci
alias virtio:d00000009v* 9pnet_virtio
so setting the subsystem vendor id to something != zero shouldn't cause
trouble.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6440 c046a42c-6fe2-441c-8c8c-71466251a162
Also use the existing macro for the PCI vendor ID
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6439 c046a42c-6fe2-441c-8c8c-71466251a162
Gerd added these macros a while back.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6438 c046a42c-6fe2-441c-8c8c-71466251a162
Linux changed its physical address location in the elf header from
0xc0000000 to 0 on 2.6.25, causing later kernels to fail booting
with the -kernel option.
This patch assures that the lowest segment in the elf binary is loaded
to KERNEL_LOAD_ADDR, which is where the firmware expects it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6437 c046a42c-6fe2-441c-8c8c-71466251a162
Add resource registration both for P4 and A7.
This is needed because of #5935 SH4: Eliminate P4 to A7 mangling.
Additionally, {reg,iop,mem}base which is no longer used are removed.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6433 c046a42c-6fe2-441c-8c8c-71466251a162
On the MIPS Magnum, the time that is held in the RTC's NVRAM should be
relative to midnight on 1980-01-01. This patch adds an extra parameter
to rtc_init(), allowing different epochs to be used. For the Magnum,
1980 is specified, and for all other machines, 2000 is specified.
I've not modified the handling of the century byte, as with an epoch of
1980 and a year of 2009, one could argue that it should hold either
0, 1, 19 or 20. NT 3.50 on MIPS does not read the century byte.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6429 c046a42c-6fe2-441c-8c8c-71466251a162
This avoid crash when a bigger RAM size is requested (the devices are
mapped at 0x01000000).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6419 c046a42c-6fe2-441c-8c8c-71466251a162
Original text below.
Attached is a patch that changes how the emulated floppy controller replies to Sense Interrupt Status commands immediately after a controller reset. The specs state that after a Reset the 82078 goes into polling mode which needs four Sense Interrupt Status commands to be issued afterwards to clear the status of each drive. Currently we always respond to Sense Interrupt Status with a SEEK END instead of POLLING. This causes a problem with the SCO Openserver installer which is expects a POLLING state after reset. This patch returns a POLLING status for four Sense Interrupt Status requests immediately after a controller reset. This approach mirrors the way Bochs handles this situation. With the attached patch applied Openserver gets further when trying to load storage drivers from the floppy disk (blocked by another issue, patch on its way). I have successfully tested the floppy drive on the following OSs after applying this patch: Windows 98, Windows XP SP2, Linux x86 (SysRescCD 1.1.3 and Ubuntu 8.10).
Justin
Changelog:
Properly handle Sense Interrupt Status after FDC Reset
Signed-off-by: Justin Chevrier <theburner1@yahoo.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6416 c046a42c-6fe2-441c-8c8c-71466251a162
[ The following text is in the "UTF-8" character set. ]
[ Your display is set for the "koi8-r" character set. ]
[ Some characters may be displayed incorrectly. ]
This patch fixes vga rendering when the guest endianness differs from
the host endianness: in this case we can only share the buffer if the
bpp is 32 and we must change the pixelformat accordingly.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6413 c046a42c-6fe2-441c-8c8c-71466251a162
The vm state handler needed updating after the recent vm state change
notification refactoring.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6403 c046a42c-6fe2-441c-8c8c-71466251a162
Instead of copying to a temporary buffer, map guest memory for IDE DMA
transactions.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6398 c046a42c-6fe2-441c-8c8c-71466251a162
This version of the patch adds new option "werror" to -drive flag.
Possible values are:
report - report errors to a guest as IO errors
ignore - continue as if nothing happened
stop - stop VM on any error and retry last command on resume
enospc - stop vm on ENOSPC error and retry last command on resume
all other errors are reported to a guest.
Default is "report" to maintain current behaviour.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6388 c046a42c-6fe2-441c-8c8c-71466251a162
Switc vram unmapping in map_linear_vram to the simpler pattern used by
unmap_linear_vram.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6386 c046a42c-6fe2-441c-8c8c-71466251a162
We should not re-register the cirrus io-memory regions on each reset.
Moreover, this patch removes some dead code and pushes other static
field initializations from reset to init_common.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6385 c046a42c-6fe2-441c-8c8c-71466251a162
cirrus bitblt reset will stop and start dirty logging even when there is no
need; this causes full redraws.
avoid by only updating memory access when exiting cpu-to-video update mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6384 c046a42c-6fe2-441c-8c8c-71466251a162
Cleaned-up port from kvm-userspace: We have to stop any vram logging
while doing remaps. Otherwise the logger gets confused. This reward is
enormously accelerated cirrus vga in kvm mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6383 c046a42c-6fe2-441c-8c8c-71466251a162
Fix the broken text mode after reset by unmapping potentially mapped
vram.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6382 c046a42c-6fe2-441c-8c8c-71466251a162
It may lead to the issue when booting windows guests with acpi=1
if return the old pmsts.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6375 c046a42c-6fe2-441c-8c8c-71466251a162
And use it for the malta emulation. Fix segfault introduced in
revision 6352.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6365 c046a42c-6fe2-441c-8c8c-71466251a162
I noticed that pcnet_common_init() takes an unused 'info_str'
parameter, added in r2142. Since then, we always pass "pcnet"
to register_savevm() (and never "lance").
Note that r6218 changed vc->info_str to "lance" for sun4m emulation.
On the assumption that it's not needed, this patch removes the
parameter. If reverting the change in r2142, and registering with
"lance" would be preferable, I can submit a patch to do so.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6362 c046a42c-6fe2-441c-8c8c-71466251a162
I discovered a bug in the hpet code that caused Windows to boot without
hpet. The config mask I was using was preventing the guest from placing
the hpet into 32 bit mode.
(Beth Kon)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6357 c046a42c-6fe2-441c-8c8c-71466251a162
This patch improves G364 video card emulation (used in MIPS Magnum machine):
- Use memory dirty tracking to not refresh whole screen each time
- Use macros for debugging messages
- Add support for hardware cursor
- Handle Y-panning
- Raise irq at each screen redraw
- Support retrieving of some registers
- Add load/save support
The emulation has been tested in Linux 2.1 and Windows NT 3.5, in
640x480, 800x600, 1024x768 and 1280x1024 resolutions.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6356 c046a42c-6fe2-441c-8c8c-71466251a162
ppm_save's signature changed so it needs updating.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6350 c046a42c-6fe2-441c-8c8c-71466251a162
This is specific to OpenHackware, and not used by OpenBIOS.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6347 c046a42c-6fe2-441c-8c8c-71466251a162
this patch fixes the screendump functionality that was recently broken;
it must be applied *after* PATCH 5, 6 and 7 of the original displaystate
change patch series.
In fact the other patches make much easier to solve the screendump
problem because they make the console switching mechanism more robust.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6345 c046a42c-6fe2-441c-8c8c-71466251a162
Patch 5/7
This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.
This patch does *not* include any required changes to any device, these
changes come with the following patches.
Patch 6/7
This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;
In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.
Patch 7/7
This patch updates the graphic device code to use the new
graphical_console_init function.
As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
r6322 introduced a warning pointed out by Jan Kiszka.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6342 c046a42c-6fe2-441c-8c8c-71466251a162
These are references to 'loglevel' that aren't on a simple 'if (loglevel &
X) qemu_log()' statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6340 c046a42c-6fe2-441c-8c8c-71466251a162
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the DisplayState interface adding support for
multiple frontends at the same time (sdl and vnc) and implements most
of the benefit of the shared_buf patch without the added complexity.
Currently DisplayState is managed by sdl (or vnc) and sdl (or vnc) is
also responsible for allocating the data and setting the depth.
Vga.c (or another backend) will do any necessary conversion.
The idea is to change it so that is vga.c (or another backend) together
with console.c that fully manage the DisplayState interface allocating
data and setting the depth (either 16 or 32 bit, if the guest uses a
different resolution or is in text mode, vga.c (or another backend) is
in charge of doing the conversion seamlessly).
The other idea is that DisplayState supports *multiple* frontends
like sdl and vnc; each of them can register some callbacks to be called
when a display event occurs.
The interesting changes are:
- the new structures and related functions in console.h and console.c
in particular the following functions are very helpful to manage a
DisplaySurface:
qemu_create_displaysurface
qemu_resize_displaysurface
qemu_create_displaysurface_from
qemu_free_displaysurface
- console_select and qemu_console_resize in console.c
this two functions manage multiple consoles on a single host display
- moving code around in hw/vga.c
as for the shared_buf patch this is necessary to be able to handle a dynamic
DisplaySurface bpp
- changes to vga_draw_graphic in hw/vga.c
this is the place where the DisplaySurface buffer is shared with the
videoram, when possible;
Compared to the last version the only changes are:
- do not remove support to dpy_copy in cirrus_vga
- change the name of the displaysurface handling functions
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6336 c046a42c-6fe2-441c-8c8c-71466251a162
Do not handle bgr host displays in the backends.
Right now a bgr flag exists so that sdl can set it, if the SDL_Surface
is bgr.
Afterwards the graphic device (e.g. vga.c) does the needed conversion.
With this patch series is sdl that is responsible for rendering the format
provided by the graphic device that must provide a DisplaySurface
(ds->surface) in 16 or 32 bpp, rgb.
Afterwards sdl creates a SDL_Surface from the given DisplaySurface and
blits it into the main SDL_Surface using SDL_BlitSurface.
Everything is handled by sdl transparently, because SDL_BlitSurface is
perfectly capable of handling bgr displays by itself.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6335 c046a42c-6fe2-441c-8c8c-71466251a162
Use macros to avoid #ifdefs on debugging code.
This patch doesn't try to merge logging macros from different files,
but just unify the debugging code #ifdefs onto a macro on each file. A
further cleanup can unify the debugging macros on a common header, later
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6332 c046a42c-6fe2-441c-8c8c-71466251a162
An external interrupt should not interrupted in-servicing interrupt with equal priority.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6328 c046a42c-6fe2-441c-8c8c-71466251a162
currently there is no way to fully disable any graphic card device for
the PC architecture.
You can have no graphical output, thanks to -nographic, but you would
have the VGA device connected to your PCI bus anyway.
There is already a convenient -vga option to choose between std, cirrus
and vmware; this patch add the new option "none" to select no graphic
card at all.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6322 c046a42c-6fe2-441c-8c8c-71466251a162
