qemu/hw
blueswir1 f2d81b3300 Floppy: Properly handle Sense Interrupt Status after FDC Reset
Original text below.

Attached is a patch that changes how the emulated floppy controller replies to Sense Interrupt Status commands immediately after a controller reset. The specs state that after a Reset the 82078 goes into polling mode which needs four Sense Interrupt Status commands to be issued afterwards to clear the status of each drive. Currently we always respond to Sense Interrupt Status with a SEEK END instead of POLLING. This causes a problem with the SCO Openserver installer which is expects a POLLING state after reset. This patch returns a POLLING status for four Sense Interrupt Status requests immediately after a controller reset. This approach mirrors the way Bochs handles this situation. With the attached patch applied Openserver gets further when trying to load storage drivers from the floppy disk (blocked by another issue, patch on its way). I have successfully tested the floppy drive on the following OSs after applying this patch: Windows 98, Windows XP SP2, Linux x86 (SysRescCD 1.1.3 and Ubuntu 8.10).

Justin

Changelog:

Properly handle Sense Interrupt Status after FDC Reset

Signed-off-by: Justin Chevrier <theburner1@yahoo.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6416 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-24 12:09:52 +00:00
..
ac97.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
acpi.c Always return latest pmsts instead of the old one (Xiantao Zhang) 2009-01-21 16:31:20 +00:00
adb.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
adlib.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
ads7846.c
alpha_palcode.c Convert references to logfile/loglevel to use qemu_log*() macros 2009-01-15 22:34:14 +00:00
an5206.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
apb_pci.c Add EBUS bridge 2009-01-10 11:33:32 +00:00
apic.c Add -rtc-td-hack option to fix time drift with RTC on Windows (Gleb Natapov) 2009-01-15 20:11:34 +00:00
arm_boot.c uImage: rename load_uboot() to load_uimage() (Hollis Blanchard) 2008-11-20 22:14:40 +00:00
arm_gic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
arm_pic.c
arm_sysctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
arm_timer.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
arm-misc.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
armv7m_nvic.c Fix warnings that would be caused by ld flag --warn-common 2008-09-17 19:04:14 +00:00
armv7m.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
audiodev.h
axis_dev88.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
baum.c baum: remove 2 warnings 2008-12-11 22:42:58 +00:00
baum.h
blizzard_template.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
blizzard.c Fix a warning in hw/blizzard.c 2009-01-16 20:07:19 +00:00
boards.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
bt-hci-csr.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt-hci.c Add qemu_strndup: qemu_strdup with length limit. 2008-11-09 00:28:40 +00:00
bt-hid.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt-l2cap.c Add L2CAP logic and a virtual SDP server for use in emulated devices. 2008-09-29 00:14:22 +00:00
bt-sdp.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt.h Use VHCI to allow the host os to participate in a qemu bluetooth "vlan". 2008-09-29 00:31:41 +00:00
cbus.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
cdrom.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
cirrus_vga_rop2.h
cirrus_vga_rop.h
cirrus_vga.c cirrus: unify unmapping of vram (Jan Kiszka) 2009-01-21 18:31:42 +00:00
cs4231.c Remove address masking 2008-12-02 17:47:02 +00:00
cs4231a.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
cuda.c cuda: fix crash on Windows 2009-01-18 12:16:26 +00:00
devices.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
dma.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
ds1225y.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
dummy_m68k.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
e1000_hw.h
e1000.c Implement e1000 link status (Mark McLoughlin) 2009-01-08 19:45:50 +00:00
ecc.c
eccmemctl.c Implement hw/eccmemctl.c version differences (Robert Reif) 2008-12-23 15:08:13 +00:00
eepro100.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
eeprom93xx.c
eeprom93xx.h
es1370.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
escc.c escc: allow one IRQ per serial channel 2009-01-14 14:47:56 +00:00
escc.h escc: allow one IRQ per serial channel 2009-01-14 14:47:56 +00:00
esp.c Remove address masking 2008-12-02 17:47:02 +00:00
etraxfs_dma.c ETRAX: Process out channels immediately when the channel is started. 2009-01-07 13:46:31 +00:00
etraxfs_dma.h ETRAX-FS: Make etraxfs_dmac_run local. 2008-11-04 20:29:29 +00:00
etraxfs_eth.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
etraxfs_pic.c ETRAX: Correctly update the interrupt vector when interrupts get masked. 2009-01-07 13:30:41 +00:00
etraxfs_ser.c ETRAX-FS: No need to decode the address anymore. 2008-12-06 23:19:03 +00:00
etraxfs_timer.c ETRAX: Support timer count reads and correct frequencies. 2009-01-07 13:24:40 +00:00
etraxfs.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
etraxfs.h ETRAX: Let the ethernet PHY report the current link-state. 2009-01-09 00:04:35 +00:00
fdc.c Floppy: Properly handle Sense Interrupt Status after FDC Reset 2009-01-24 12:09:52 +00:00
fdc.h
firmware_abi.h
flash.h Fill in WLAN and BT platform data in CAL area as expected by Maemo. 2008-07-29 14:19:16 +00:00
fmopl.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
fmopl.h
fw_cfg.c Allow to register a callback with fw_cfg_add_callback() 2008-12-11 17:30:50 +00:00
fw_cfg.h Add common keys to firmware configuration 2008-09-18 18:33:18 +00:00
g364fb.c G364 video adapter enhancement 2009-01-16 21:13:58 +00:00
grackle_pci.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
gt64xxx.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
gumstix.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
gus.c Add missing static qualifier 2008-12-11 00:14:28 +00:00
gusemu_hal.c
gusemu_mixer.c
gusemu.h
gustate.h
heathrow_pic.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
hpet_emul.h hpet config mask fix 2009-01-16 21:38:58 +00:00
hpet.c hpet config mask fix 2009-01-16 21:38:58 +00:00
hw.h Reintroduce migrate-to-exec: support (Charles Duffy) 2008-11-11 16:46:33 +00:00
i2c.c Fix load width for slave address in i2c_bus_load (Chris Lalancette). 2008-07-29 13:57:48 +00:00
i2c.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
i8254.c Remove trailing spaces introduced by commit 6081 2008-12-18 22:42:43 +00:00
i8259.c Special Mask Mode for i8259 PIC (Sebastian Reichelt). 2008-07-19 09:18:48 +00:00
ide.c Fix warning in ide.c 2009-01-22 18:39:53 +00:00
integratorcp.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
iommu.c add Arbiter Enable Register support to sparc iommu (Robert Reif) 2008-12-21 10:46:23 +00:00
irq.c
irq.h
isa_mmio.c
isa.h Make DMA bottom-half driven (v2) 2008-10-31 17:25:56 +00:00
jazz_led.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
lm832x.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
lsi53c895a.c LSI53C895A: Introduce CASE_GET_REG24 2009-01-14 21:42:48 +00:00
m48t59.c Register reset handlers 2008-12-28 18:27:10 +00:00
mac_dbdma.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
mac_nvram.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
macio.c Use ESCC for PowerMac serial 2009-01-12 17:40:23 +00:00
mainstone.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
mainstone.h
max111x.c
max7310.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
mc146818rtc.c Add -rtc-td-hack option to fix time drift with RTC on Windows (Gleb Natapov) 2009-01-15 20:11:34 +00:00
mcf5206.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
mcf5208.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
mcf_fec.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
mcf_intc.c
mcf_uart.c
mcf.h
mips_int.c
mips_jazz.c G364 video adapter enhancement 2009-01-16 21:13:58 +00:00
mips_malta.c mips_malta: map the CBUS UART as the third serial port 2009-01-18 14:28:20 +00:00
mips_mipssim.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
mips_r4k.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
mips_timer.c Convert references to logfile/loglevel to use qemu_log*() macros 2009-01-15 22:34:14 +00:00
mips.h G364 video adapter enhancement 2009-01-16 21:13:58 +00:00
mipsnet.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
mpcore.c Attached patch contains warning fixes. 2008-12-05 17:56:40 +00:00
mst_fpga.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
musicpal.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
nand.c Fix NAND flash save/restore. 2009-01-20 04:15:47 +00:00
ne2000.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
nseries.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
nvram.h Suppress gcc 4.x -Wpointer-sign (included in -Wall) warnings 2008-09-20 08:07:15 +00:00
omap1.c add an init function parameter to qemu_chr_open() 2009-01-18 14:08:04 +00:00
omap2.c add an init function parameter to qemu_chr_open() 2009-01-18 14:08:04 +00:00
omap_clk.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_dma.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_dss.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
omap_i2c.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_lcd_template.h
omap_lcdc.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
omap_mmc.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_sx1.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
omap.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
onenand.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
openpic.c powerpc/kvm: fix a openpic bug (Liu Yu) 2009-01-15 21:19:54 +00:00
palm.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
parallel.c Parallel port reset 2008-12-07 23:26:09 +00:00
pc.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pc.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pci_host.h Improve PCI debug support 2009-01-08 18:52:52 +00:00
pci.c Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin) 2009-01-13 19:47:10 +00:00
pci.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pckbd.c MIPS Magnum: fix memory-mapped i8042 2008-12-10 15:02:07 +00:00
pcmcia.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pcnet.c Remove unused info_str parameter to pcnet_common_init() 2009-01-17 20:47:10 +00:00
pcspk.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
pflash_cfi01.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
pflash_cfi02.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
piix_pci.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
pixel_ops.h
pl011.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl022.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl031.c Fix RTC initial date computation 2008-12-04 21:34:52 +00:00
pl050.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl061.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl080.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl110_template.h
pl110.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pl181.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pl190.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
ppc4xx_devs.c Convert references to logfile/loglevel to use qemu_log*() macros 2009-01-15 22:34:14 +00:00
ppc4xx_pci.c target-ppc: kill a few warnings 2008-12-07 23:00:00 +00:00
ppc4xx.h target-ppc: create a helper function to allow more flexible RAM allocation for PPC 4xx 2008-12-15 23:15:56 +00:00
ppc405_boards.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ppc405_uc.c target-ppc: rename ppc405_sdram_init() to ppc4xx_sdram_init() 2008-12-15 22:59:45 +00:00
ppc405.h target-ppc: move PPC4xx SDRAM controller emulation from ppc405_uc.c to ppc4xx_devs.c 2008-12-15 22:59:34 +00:00
ppc440_bamboo.c Fix warnings 2009-01-16 19:41:04 +00:00
ppc440.c target-ppc: PowerPC 440EP SoC emulation 2008-12-16 10:44:06 +00:00
ppc440.h target-ppc: PowerPC 440EP SoC emulation 2008-12-16 10:44:06 +00:00
ppc_chrp.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ppc_mac.h Use ESCC for PowerMac serial 2009-01-12 17:40:23 +00:00
ppc_oldworld.c Fix kernel_size and initrd_size sign (Francois Revol) 2009-01-24 12:00:23 +00:00
ppc_prep.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ppc.c Convert references to logfile/loglevel to use qemu_log*() macros 2009-01-15 22:34:14 +00:00
ppc.h target-ppc: move OpenBIOS machines type to ppc.h from hw/ppc_oldworld.c 2009-01-08 16:01:23 +00:00
prep_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
primecell.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ps2.c
ps2.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
ptimer.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pxa2xx_dma.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_gpio.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_keypad.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_lcd.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pxa2xx_mmci.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_pcmcia.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_pic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_template.h Fix RGBT 5:5:5 drawing on pxa2xx lcd (Lars Munch) 2008-11-03 01:08:14 +00:00
pxa2xx_timer.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pxa.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
r2d.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
rc4030.c target-mips: DMA support for RC4030 chipset 2009-01-01 13:03:36 +00:00
realview_gic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
realview.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
rtl8139.c RTL8139: Latch C+ mode state instead of inferring it from C+ Command register (Avi Kivity) 2009-01-13 15:20:14 +00:00
sb16.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sbi.c Remove address masking 2008-12-02 17:47:02 +00:00
scsi-disk.c Stop VM on error in scsi-disk (Gleb Natapov) 2009-01-22 19:52:21 +00:00
scsi-disk.h
scsi-generic.c scsi-generic: correct error management 2008-10-17 08:08:56 +00:00
scsi.h
sd.c
sd.h
serial.c serial: open a null device if the CharDriverState argument is null 2009-01-18 14:28:10 +00:00
sh7750_regnames.c
sh7750_regnames.h
sh7750_regs.h
sh7750.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sh_intc.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sh_intc.h Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sh_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sh_serial.c SH4: SCI improvement 2008-12-07 22:46:49 +00:00
sh_timer.c SH4: Eliminate P4 to A7 mangling (Takashi YOSHII). 2008-12-07 19:39:58 +00:00
sh.h SH4: Eliminate P4 to A7 mangling (Takashi YOSHII). 2008-12-07 19:39:58 +00:00
sharpsl.h
shix.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
slavio_intctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
slavio_misc.c hw/slavio_misc.c remove address from debug trace (Robert Reif) 2008-12-21 16:00:20 +00:00
slavio_timer.c Remove address masking 2008-12-02 17:47:02 +00:00
sm501_template.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sm501.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
smbus_eeprom.c
smbus.c
smbus.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
smc91c111.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
soc_dma.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
soc_dma.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
sparc32_dma.c Revert part of r5853 2008-12-15 20:24:25 +00:00
sparc32_dma.h
spitz.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ssd0303.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ssd0323.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ssi-sd.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
stellaris_enet.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
stellaris_input.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
stellaris.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
sun4c_intctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sun4m.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
sun4m.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
sun4u.c Switch to CMD646 IDE 2009-01-17 18:41:53 +00:00
tc6393xb_template.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tc6393xb.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
tc58128.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
tcx.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
tmp105.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tosa.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
tsc210x.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tsc2005.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tusb6010.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
twl92230.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
unin_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
usb-bt.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
usb-hid.c fix usb-hid SET_IDLE behaviour (Stefano Stabellini) 2009-01-07 16:41:47 +00:00
usb-hub.c
usb-msd.c Add image format option for USB mass-storage devices 2008-08-21 22:24:32 +00:00
usb-musb.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
usb-net.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
usb-ohci.c USB OHCI: add support for big endian targets 2009-01-18 20:56:30 +00:00
usb-serial.c add an init function parameter to qemu_chr_open() 2009-01-18 14:08:04 +00:00
usb-uhci.c uhci: Change default transaction lifetime to 32 frames (Max Krasnyansky) 2008-09-11 19:42:00 +00:00
usb-wacom.c
usb.c usb: generic packet handler cleanup and documentation (Max Krasnyansky) 2008-08-21 19:29:38 +00:00
usb.h Emulate a USB bluetooth dongle (or HCI Transport layer). 2008-09-29 00:40:44 +00:00
versatile_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
versatilepb.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
vga_int.h fix screendump (Stefano Stabellini) 2009-01-16 19:07:10 +00:00
vga_template.h
vga.c fix endianness problem sharing the videoram buffer 2009-01-23 19:56:19 +00:00
virtio-balloon.c pci: virtio: use pci id defines (Gerd Hoffman) 2008-12-11 21:20:03 +00:00
virtio-balloon.h Add virtio-balloon support 2008-12-04 20:33:06 +00:00
virtio-blk.c Stop VM on error in virtio-blk. (Gleb Natapov) 2009-01-22 19:52:25 +00:00
virtio-blk.h pci: virtio: use pci id defines (Gerd Hoffman) 2008-12-11 21:20:03 +00:00
virtio-console.c Add missing files from last commit. 2009-01-15 20:05:50 +00:00
virtio-console.h Add missing files from last commit. 2009-01-15 20:05:50 +00:00
virtio-net.c Make virtio_net_init() return void (Mark McLoughlin) 2009-01-13 21:09:18 +00:00
virtio-net.h Make virtio_net_init() return void (Mark McLoughlin) 2009-01-13 21:09:18 +00:00
virtio.c Rename fls to qemu_fls 2008-12-11 19:37:54 +00:00
virtio.h Make struct iovec universally available 2008-12-05 20:05:26 +00:00
vmmouse.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
vmport.c Silence vmport unless DEBUG is enabled. 2008-08-19 19:13:06 +00:00
vmware_vga.c fix screendump (Stefano Stabellini) 2009-01-16 19:07:10 +00:00
wm8750.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
zaurus.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00