Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target: Build gdbstub-xml.o only when
TARGET_XML_FILES is not empty.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_NO_* variables replaced with the lnot logical function
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
[PMM: fixed a few CONFIG_NO_* uses that were missed]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TARGET_ARCH is generally wrong to use, there are better variables
provided in config-target.mak. The right one is usually TARGET_NAME
(previously TARGET_ARCH2), but for bsd-user we can also use TARGET_ABI_DIR
for consistency with linux-user.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For systemtap the location of the process being tapped is crucial, as a
result the existing stp file requires installation for use.
There are now two files:
$(TARGET_DIR)/$(QEMU_PROG).stp-installed: copied to $(tapdir)/$(QEMU_PROG).stp
$(TARGET_DIR)/$(QEMU_PROG).stp: pointing to the built binary, usable
without installation
To use:
stap -I $(TARGET_DIR) ...
Signed-off-by: Alon Levy <alevy@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qmp_dump_guest_memory() calls dump_init() and returns an Error when
cpu_get_dump_info() returns an error, as done by the stub.
So there is no need to have a stub for qmp_dump_guest_memory().
Enable the documentation of the always-present dump-guest-memory command.
That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure
completely out of the picture for target CPU features.
Signed-off-by: Andreas Färber <afaerber@suse.de>
dump.c:dump_init() never checked for the return code anyway.
If paging is not enabled, it will fall back to an identity map.
If paging is enabled and getting memory mapping list is not
implemented, qemu_get_guest_memory_mapping() will return an error.
Since the targets not implementing memory mapping also don't implement
dump support, we will not reach this code today and can worry about
changing cpu_paging_enabled() default when the need arises.
This allows us to drop CONFIG_HAVE_GET_MEMORY_SUPPORT.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This allows us to drop CONFIG_NO_CORE_DUMP with its indirect dependency
on CONFIG_HAVE_CORE_DUMP.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It will provide stubs for *-user targets once softmmu-specific calls
are attempted from common CPU code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The -mwindows option is not anymore in LIBS at this point of the Makefile,
it is only in libs_softmmu. Check the right variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Moving the inclusions closer to Makefile, and before rules.mak, makes
Makefile and Makefile.target more consistent with each other.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1366102238-12374-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move -lm to the end of the line, so that it can be picked up as a
dependency by pixman in the static build case.
Reviewed-by: Peter Maydell <peter.maydell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Introduce [qtest_]{read,write}[bwlq]() libqtest functions and
corresponding QTest protocol commands to replace local versions in
libi2c-omap.c.
Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-4-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short. Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...).
Consolidate these variables in a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCI no longer compiled after commit 76cad71136.
The TCI disassembler depends on data structures which are different for
each QEMU target, so it cannot be compiled as a universal-obj today.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vnc-tls.h is included by vnc.h, and it includes gnutls/gnutls.h.
Hence, GnuTLS header files are needed by all files that include
vnc.h, most notably qmp.c. Move these flags to QEMU_CFLAGS for
simplicity.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These versions of GCC require insane (>2GB) amounts of memory to compile
translate.o. As a countermeasure, disable the culprit optimization pass.
This should fix the buildbot failure for default_x86_64_fedora16. Anyway
this is a good thing to do because people will try to compile 1.3 with
less than 2GB of memory and complain.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Weak symbols were a nice idea, but they turned out not to be a good one.
Toolchain support is just too sparse, in particular llvm-gcc is totally
broken.
This patch uses a surprisingly low-tech approach: a static library.
Symbols in a static library are always overridden by symbols in an
object file. Furthermore, if you place each function in a separate
source file, object files for unused functions will not be taken in.
This means that each function can use all the dependencies that it needs
(especially QAPI stuff such as error_setg).
Thus, all stubs are placed in separate object files and put together in
a static library. The library then is linked to all programs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
After commit dcff25f2cd, Dependency file
are taken from the directories that have a Makefile.objs file. This is
not enough, since files can be included from other directories.
So, pick them from directories that have an object file in them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Link in oslib objects also for BSD user, but avoid using the version of
qemu_vmalloc() defined in oslib-posix.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now we create object files in a hierarchy under hw/, so the
'clean' target must also be updated to delete those object files.
Rather than using a manual list of subdirectories which will
easily drift out of date, we just delete all .o and .d files
in the target directory hierarchy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit dcff25f2cd removed too many *.d
files. The directories fpu/ and tcg/ still don't use the recursive
subdir rules.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
I think I understand enough of what's going on in these rules to ensure this is
right. But I could certainly use a second or third opinion...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no difference in oslib-obj-y between user-mode and system
targets. There used to be when user-mode could optionally be
compiled with PIE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All paths are now explicitly given, and the object tree mimics
the source tree, so there is no need to apply special vpaths.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This completes the move to nested Makefiles for virtio and a few
other files that were not part of obj-TARGET-y, but still were
compiled separately for each target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At this point we will start adding nesting behavior to other files
than Makefile.target. Because Makefile.objs is included by
Makefile.target, it is simpler to move the processing of
subdirectories there.
To enable this, only add per-target files to obj-y. Use a separate
variable for the linker dependencies, all-obj-y. This variable includes
obj-y and also all objects that are taken from other directories.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This simplifies things, because they will only be included for softmmu
targets and because the stubs are taken out-of-line in separate files,
which in the future could even be compiled only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keeping GENERATED_HEADERS dependencies up-to-date everywhere is complex.
We can simply make the Makefile depend on them, and they will be built
before all other targets.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command's usage:
dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
fd's name.
Note:
1. If you want to use gdb to process the core, please specify -p option.
The reason why the -p option is not default is:
a. guest machine in a catastrophic state can have corrupted memory,
which we cannot trust.
b. The guest machine can be in read-mode even if paging is enabled.
For example: the guest machine uses ACPI to sleep, and ACPI sleep
state goes in real-mode.
2. If you don't want to dump all guest's memory, please specify the start
physical address and the length.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The core file contains register's value. These APIs write registers to
core file, and them will be called in the following patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Walk cpu's page table and collect all virtual address and physical address mapping.
Then, add these mapping into memory mapping list. If the guest does not use paging,
it will do nothing. Note: the I/O memory will be skipped.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The memory mapping list stores virtual address and physical address mapping.
The virtual address and physical address are contiguous in the mapping.
The folloing patch will use this information to create PT_LOAD in the vmcore.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber:
Drop darwin-user
configure: add '--disable-cocoa' switch
raw-posix: Do not use CONFIG_COCOA macro
* 'qom-cpu-rest.v1' of git://github.com/afaerber/qemu-cpu:
Makefile: Simplify compilation of target-*/cpu.c
target-mips: Start QOM'ifying CPU init
target-mips: QOM'ify CPU
target-m68k: Add QOM CPU subclasses
target-m68k: Start QOM'ifying CPU init
target-m68k: QOM'ify CPU reset
target-m68k: QOM'ify CPU
target-sh4: Start QOM'ifying CPU init
target-sh4: QOM'ify CPU reset
target-sh4: QOM'ify CPU
MAINTAINERS: Downgrade target-mips and target-sh4 to Odd Fixes
MAINTAINERS: Downgrade target-m68k to Odd Fixes
It's been orphaned, not compiling for a long time and despite Apple's
drop of their Rosetta ppc emulation technology with Mac OS X Lion no one
has stepped up to fix it.
Testing necessary changes wrt QOM'ification thus is impossible, so we
might as well remove it completely.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Embed CPUMIPSState as first member of QOM MIPSCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Embed CPUM68KState as first member of QOM M68kCPU.
Drop cpu_m68k_close() in favor of object_delete().
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Laurent Vivier <Laurent@Vivier.EU>
Tested-by: Laurent Vivier <Laurent@Vivier.EU>
Embed CPUSH4State as first member of SuperHCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Autoconf concept of "datadir" is supposed to be "$prefix/share", not
"$prefix/share/PACKAGE", so using datadir for the Qemu-specific
directory is confusing.
The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_DATADIR) for
both "datadir" and "qemu_datadir" variables.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Embed CPUMBState as first member of QOM MicroBlazeCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
[AF: Updated cpu.c to include cpu-qom.h indirectly via cpu.h]
Embed CPUCRISState as first member of QOM CRISCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
* origin/master: (27 commits)
target-arm: Move reset handling to arm_cpu_reset
target-arm: Drop cpu_reset_model_id()
target-arm: Move cache ID register setup to cpu specific init fns
target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_reset
target-arm: Move feature register setup to per-CPU init fns
target-arm: Move iWMMXT wCID reset to cpu_state_reset
target-arm: Drop JTAG_ID documentation
target-arm: Move SCTLR reset value setup to per cpu init fns
target-arm: Move CTR setup to per cpu init fns
target-arm: Move MVFR* setup to per cpu init fns
target-arm: Move FPSID config to cpu init fns
target-arm: Move feature bit settings to CPU init fns
target-arm: Add QOM subclasses for each ARM cpu implementation
target-arm: remind to keep arm features in sync with linux-user/elfload.c
tci: GETPC() macro must return an uintptr_t
gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pc
softfloat: make USE_SOFTFLOAT_STRUCT_TYPES compile
target-xtensa: add tests for LOOPNEZ and LOOPGTZ
target-xtensa: fix LOOPNEZ/LOOPGTZ translation
qtest: add m48t59 tests for Sparc
...
The versatile i2c controller implementation was separated to
its own file called versatile_i2c.c. This is done as a preparation
for adding i2c support to the versatilepb board.
Signed-off-by: Oskar Andero <oskar.andero@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tracetool script is written in shell and has hit several portability
problems due to shell quirks or external tools across host platforms.
Additionally the amount of string processing and lack of real data
structures makes it tough to implement code generator backends for
tracers that are more complex.
This patch replaces the shell version of tracetool with a Python
version. The new tracetool design is:
scripts/tracetool.py - top-level script
scripts/tracetool/backend/ - tracer backends live here (simple, ust)
scripts/tracetool/format/ - output formats live here (.c, .h)
There is common code for trace-events definition parsing so that
backends can focus on generating code rather than parsing input.
Support for all existing backends (nop, stderr, simple, ust,
and dtrace) is added back in follow-up patches.
[Commit description written by Stefan Hajnoczi]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* sstabellini/for_anthony:
xen: introduce an event channel for buffered io event notifications
xen-mapcache: don't unmap locked entry during mapcache invalidation
Xen, mapcache: Fix the compute of the size of bucket.
xen: handle backend deletion from xenstore
Xen: Add xen-apic support and hook it up.
Xen: basic HVM MSI injection support.
This is Diamond 233L Standard Core Rev.C (LE), implemented through
linux/gdb overlay.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa:
target-xtensa: Start QOM'ifying CPU init
target-xtensa: QOM'ify CPU reset
target-xtensa: QOM'ify CPU
target-xtensa: improve unit tests debugging
target-xtensa: Move helpers.h to helper.h
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm_gic: Remove stray hardcoded tab
hw/arm_gic: gic_set_pending_private() is NVIC only
hw/arm_gic: Use NVIC instead of LEGACY_INCLUDED_GIC define
hw/arm_gic: Make gic_reset a sysbus reset function
hw/arm11mpcore: Convert to using sysbus GIC device
hw/exynos4210_gic: Convert to using sysbus GIC
hw/realview_gic: switch to sysbus GIC
hw/a9mpcore: Switch to using sysbus GIC
hw/a15mpcore: switch to using sysbus GIC
hw/arm_gic: Make the GIC its own sysbus device
hw/arm_gic: Expose PPI inputs as gpio inputs
hw/arm_gic: Move gic_get_current_cpu into arm_gic.c
hw/arm_gic: Move NCPU definition to arm_gic.c
hw/exynos4210_combiner.c: Drop excessive read/write access check.
ARM: Exynos4210: Drop gic_cpu_write() after initialization.
Fix bit test in Exynos4210 UART emulation to use & instead of &&
Embed CPUXtensaState as first member of XtensaCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Compile arm_gic.c as a standalone C file to produce a self contained
sysbus GIC device. Support the legacy usage by #include of the .c file
by making those users #define LEGACY_INCLUDED_GIC, so we can convert
them one by one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Evgeny Voevodin <e.voevodin@samsung.com>
Embed CPULM32State as first member of QOM LM32CPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Align QOM'ified targets, with a view to simplify Makefile.target.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Embed CPUS390XState as first member of S390CPU.
Since -cpu is being ignored, make TYPE_S390_CPU non-abstract.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
* stefanha/tracing:
tracetool: dtrace: handle in and next reserved words
tracetool: dtrace disabled-events fix
Makefile.target: code stp dependency on trace-events
* 'qom-cpu-unicore32.v3' of git://github.com/afaerber/qemu-cpu:
target-unicore32: Move CPU-dependent init into initfn
target-unicore32: QOM'ify CPU
target-unicore32: License future contributions under GPLv2+
target-unicore32: Relicense to GPLv2+
MAINTAINERS: Add entry for UniCore32
Embed CPUUniCore32State as first member of UniCore32CPU.
Contributed under GPLv2+.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Introduce only one non-abstract type TYPE_ARM_CPU and do not touch
cp15 registers to not interfere with Peter's ongoing remodelling.
Embed CPUARMState as first (additional) field of ARMCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This completes the transition away from AREG0. This patch must
be last because it requires CONFIG_TCG_PASS_AREG0 set too.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Adjust generation of load and store templates so that the functions
take a parameter for CPUState instead of relying on global env.
Remove wrappers. Move remaining memory helpers to ldst_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make memory access helpers take a parameter for CPUState instead
of relying on global env. Introduce wrappers for load and store ops.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kraxel/usb.44:
Endian fix an assertion in usb-msd
uhci: alloc can't fail, drop check.
uhci: new uhci_handle_td return code for tds still in flight
uhci: renumber uhci_handle_td return codes
uhci: use enum for uhci_handle_td return codes
uhci: tracing support
uhci: cancel on schedule stop.
uhci: fix uhci_async_cancel_all
uhci: pass addr to uhci_async_alloc
usb: improve packet state sanity checks
usb-ohci: DMA writeback bug fixes
usb-ehci: drop unused isoch_pause variable
usb: zap hw/ush-{ohic,uhci}.h + init wrappers
usb: the big rename
Link the Object base class and the module infrastructure for class
registration. Introduce $(universal-obj-y) for objects that are more
common than $(common-obj-y), so that those only get built once.
Call QOM module init for type registration.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reorganize usb source files. Create a new hw/usb/ directory and move
all usb source code to that place. Also make filenames a bit more
descriptive. Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-". Fixup paths Makefile and include
paths to make it compile. No code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This provides the required user space stubs to enable the in-kernel
i8254 emulation of KVM.
The in-kernel model supports lost tick compensation according to the
"delay" policy. This is enabled by default and can be switched off via a
device property.
Depending on the feature set of the host kernel (before 2.6.32), we may
have to disable the HPET or lack sound output from the PC speaker.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xilinx zynq-7000 machine model. Also includes device model for the zynq-specific
system level control register (SLCR) module.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Device model for cadence gem ethernet controller.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Implemented cadence Triple Timer Counter (TCC)
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Implemented cadence UART serial controller
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
factored out the copy-pasted common boot code from the two microblaze platforms
into a dedicated microblaze bootloader (microblaze_boot.o).
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm11mpcore: Fix broken realview_mpcore/arm11mpcore_priv properties
arm: add device tree support
arm: make sure that number of irqs can be represented in GICD_TYPER.
arm: clean up GIC constants
If compiled with CONFIG_FDT, allow user to specify a device tree file using
the -dtb argument. If the machine supports it then the dtb will be loaded
into memory and passed to the kernel on boot.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[Peter Maydell: Use machine opt rather than global to pass dtb filename]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qemu-kvm/uq/master:
pc-bios: update kvmvapic.bin
kvmvapic: Use optionrom helpers
optionsrom: Reserve space for checksum
kvmvapic: Simplify mp/up_set_tpr
kvmvapic: Introduce TPR access optimization for Windows guests
kvmvapic: Add option ROM
target-i386: Add infrastructure for reporting TPR MMIO accesses
Allow to use pause_all_vcpus from VCPU context
Process pending work while waiting for initial kick-off in TCG mode
Remove useless casts from cpu iterators
kvm: Set cpu_single_env only once
kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
This enables acceleration for MMIO-based TPR registers accesses of
32-bit Windows guest systems. It is mostly useful with KVM enabled,
either on older Intel CPUs (without flexpriority feature, can also be
manually disabled for testing) or any current AMD processor.
The approach introduced here is derived from the original version of
qemu-kvm. It was refactored, documented, and extended by support for
user space APIC emulation, both with and without KVM acceleration. The
VMState format was kept compatible, so was the ABI to the option ROM
that implements the guest-side para-virtualized driver service. This
enables seamless migration from qemu-kvm to upstream or, one day,
between KVM and TCG mode.
The basic concept goes like this:
- VAPIC PV interface consisting of I/O port 0x7e and (for KVM in-kernel
irqchip) a vmcall hypercall is registered
- VAPIC option ROM is loaded into guest
- option ROM activates TPR MMIO access reporting via port 0x7e
- TPR accesses are trapped and patched in the guest to call into option
ROM instead, VAPIC support is enabled
- option ROM TPR helpers track state in memory and invoke hypercall to
poll for pending IRQs if required
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a model of the Cortex-A15 memory mapped private peripheral
space. This is fairly simple because the only memory mapped
bit of the A15 is the GIC.
Note that we don't currently model a VGIC and therefore don't
map the VGIC related bits of the GIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exynos4210 display controller (FIMD) has 5 hardware windows with alpha and
chroma key blending functions.
Signed-off-by: Mitsyanko Igor <i.mitsyanko@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Patch adds basic model for Exynos4210 SoC PMU.
This model implements PMU registers just as a bulk of memory. Currently,
the only reason this device exists is that secondary CPU boot loader
uses PMU INFORM5 register as a holding pen.
Signed-off-by: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic support of exynos4210 UART
Signed-off-by: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add initial support of NURI and SMDKC210 boards
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Makefile, Makefile.hw, Makefile.target and libcacard/Makefile
added GLIB_CFLAGS to QEMU_CFLAGS.
Makefile.objs does this, too, and is included by all other
Makefiles, so GLIB_CFLAGS were added twice (reported by malc).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: malc <av1474@comtv.ru>
System emulation executables with SDL are typically windows
executables. Sometimes console executables are more useful,
so create both variants if linker option -mwindows was detected.
v2:
This version uses QEMU_PROGW / QEMU_PROG instead of QEMU_PROG / QEMU_PROGC.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
This class provides the main building block for QEMU Object Model and is
extensively documented in the header file. It is largely inspired by GObject.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- remove printf() in type registration
- fix typo in comment (Paolo)
- make Interface private
- move object into a new directory and move header into include/qemu/
- don't make object.h depend on qemu-common.h
- remove Type and replace it with TypeImpl * (Paolo)
- use hash table to store types (Paolo)
- aggressively cache parent type (Paolo)
- make a type_register and use it with interfaces (Paolo)
- fix interface cast comment (Paolo)
- add a few more functions required in later series
Adds support for Calxeda's Highbank SoC.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds very basic support for the xgmac ethernet core. Missing things
include:
- statistics counters
- WoL support
- rx checksum offload
- chained descriptors (only linear descriptor ring)
- broadcast and multicast handling
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove target dependencies and compile Cirrus VGA in hwlib.
Address masking can be removed since memory API handles that now.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* qemu-kvm/uq/master:
kvm: Activate in-kernel irqchip support
kvm: x86: Add user space part for in-kernel IOAPIC
kvm: x86: Add user space part for in-kernel i8259
kvm: x86: Add user space part for in-kernel APIC
kvm: x86: Establish IRQ0 override control
kvm: Introduce core services for in-kernel irqchip support
memory: Introduce memory_region_init_reservation
ioapic: Factor out base class for KVM reuse
ioapic: Drop post-load irr initialization
i8259: Factor out base class for KVM reuse
i8259: Completely privatize PicState
apic: Open-code timer save/restore
apic: Factor out base class for KVM reuse
apic: Introduce apic_report_irq_delivered
apic: Inject external NMI events via LINT1
apic: Stop timer on reset
kvm: Move kvmclock into hw/kvm folder
msi: Generalize msix_supported to msi_supported
hyper-v: initialize Hyper-V CPUID leaves.
hyper-v: introduce Hyper-V support infrastructure.
Conflicts:
Makefile.target
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The separation of ppc440 and ppc440_bamboo makes some sense, since ppc440
is the SoC while ppc440_bamboo is the actual board. But the separation
makes things harder for us for no good reason, so let's just fold them
in together with each other.
Signed-off-by: Alexander Graf <agraf@suse.de>
This introduces the KVM-accelerated IOAPIC model 'kvm-ioapic' and
extends the IRQ routing setup by the 0->2 redirection when needed.
The kvm-ioapic model has a property that allows to define its GSI base
for injecting interrupts into the kernel model. This will allow to
disentangle PIC and IOAPIC pins for chipsets that support more
sophisticated IRQ routes than the PIIX3. So far the base is kept at 0,
i.e. PIC and IOAPIC share pins 0..15.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Introduce the alternative 'kvm-i8259' device model that exploits KVM
in-kernel acceleration.
The PIIX3 initialization code is furthermore extended by KVM specific
IRQ route setup. GSI injection differs in KVM mode from the user space
model. As we can dispatch ISA-range IRQs to both IOAPIC and PIC inside
the kernel, we do not need to inject them separately. This is reflected
by a KVM-specific GSI handler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This introduces the alternative APIC device which makes use of KVM's
in-kernel device model. External NMI injection via LINT1 is emulated by
checking the current state of the in-kernel APIC, only injecting a NMI
into the VCPU if LINT1 is unmasked and configured to DM_NMI.
MSI is not yet supported, so we disable this when the in-kernel model is
in use.
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Split up the IOAPIC analogously to APIC and i8259. KVM will share the
IOAPICCommonState, the vmstate, reset logic and certain init parts with
the user space model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The KVM in-kernel APIC model will reuse parts of the user space model
while providing the same frontend view to guest and most management
interfaces.
Factor out an APIC base class to encapsulate those parts that will be
shared by user space and KVM model. This class offers callback hooks for
init, base/tpr setting, and the external NMI delivery that will be
set via APICCommonInfo structure and implemented specifically in the
subclasses.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
More KVM-specific devices will come, so let's start with moving the
kvmclock into a dedicated folder.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* 's390-next' of git://repo.or.cz/qemu/agraf:
s390: fix cpu hotplug / cpu activity on interrupts
s390x: add TR function for EXECUTE
Expose drive_add on all architectures
Add generic drive hotplugging
Compile device-hotplug on all targets
[S390] Add hotplug support
* pmaydell/arm-devs.for-upstream:
add L2x0/PL310 cache controller device
arm: add dummy gic security registers
arm: Set frequencies for arm_timer
arm: add missing scu registers
hw/omap_gpmc: Fix region map/unmap when configuring prefetch engine
hw/omap1.c: Drop unused includes
hw/omap1.c: Separate dpll_ctl from omap_mpu_state
hw/omap1.c: Separate PWT from omap_mpu_state
hw/omap1.c: Separate PWL from omap_mpu_state
hw/omap1.c: omap_mpuio_init() need not be public
hw/pl110.c: Add post-load hook to invalidate display
hw/pl181.c: Add save/load support
This is just a dummy device for ARM L2 cache controllers, based on the
pl310. The cache type parameter can be defined by a property value
and has a meaningful default.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
[Peter Maydell: removed stray blank line at end]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.
Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration. Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.
Signed-off-by: Avi Kivity <avi@redhat.com>
All guest targets could potentially implement hotplugging. With the next
patches in this set I will also reflect this in the monitor interface.
So let's always compile it in. It shouldn't hurt.
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove some dependency rules which aren't necessary (the automatically
generated .d files cover all these). These were leftovers from dyngen
days, when the object files also had a dependency on some generated
files.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The Symbian Virtual Platform was an ARM-based development and debugging
board. Since Symbian has been disbanded and the code is no longer being
used it can now be removed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Turn the ARM MPcore private timer/watchdog blocks into separate
qdev devices. This will allow us to share them neatly between
11MPCore and A9MPcore.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the out of date comment, i.e., "# libqemu" since libqemu.a is not
available anymore.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* 'tci' of git://qemu.weilnetz.de/qemu:
tcg: Add tcg interpreter to configure / make
tcg: Add tci disassembler
tcg: Add interpreter for bytecode
tcg: Add bytecode generator for tcg interpreter
tcg: Make ARRAY_SIZE(tcg_op_defs) globally available
tcg: TCG targets may define tcg_qemu_tb_exec
* 'ppc-next' of git://repo.or.cz/qemu/agraf: (24 commits)
pseries: Add partial support for PCI
ppc: Alter CPU state to mask out TCG unimplemented instructions as appropriate
pseries: Allow writes to KVM accelerated TCE table
KVM: PPC: Override host vmx/vsx/dfp only when information known
ppc: Fix up usermode only builds
pseries: Correct vmx/dfp handling in both KVM and TCG cases
PPC: Fail configure when libfdt is not available
ppc: Avoid decrementer related kvm exits
PPC: Disable non-440 CPUs for ppcemb target
PPC: Bump qemu-system-ppc to 64-bit physical address space
pseries: Under kvm use guest cpu = host cpu by default
ppc: Add cpu defs for POWER7 revisions 2.1 and 2.3
ppc: First cut implementation of -cpu host
ppc: Remove broken partial PVR matching
pseries: Update SLOF firmware image
pseries: Add device tree properties for VMX/VSX and DFP under kvm
ppc: Generalize the kvmppc_get_clockfreq() function
Set an invalid-bits mask for each SPE instructions
pseries: Update SLOF firmware image
pseries: Use Book3S-HV TCE acceleration capabilities
...
This driver emulates the ARM AACI interface (PL041) connected to a LM4549 codec.
It enables audio playback for the Versatile/PB platform.
Limitations:
- Supports only a playback on one channel (Versatile/Vexpress)
- Supports only one TX FIFO in compact-mode or non-compact mode.
- Supports playback of 12, 16, 18 and 20 bits samples.
- Record is not supported.
- The PL041 is hardwired to a LM4549 codec.
Versatile/PB test build:
linux-2.6.38.5
buildroot-2010.11
alsa-lib-1.0.22
alsa-utils-1.0.22
mpg123-0.66
Qemu host: Ubuntu 10.04 in Vmware/OS X
Playback tested successfully with speaker-test/aplay/mpg123.
Signed-off-by: Mathieu Sonet <contact@elasticsheep.com>
[Peter Maydell: fixed typo in code clearing SL1RXBUSY/SL2RXBUSY
bits, as spotted by Andrzej Zaborowski]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
This patch adds a PCI bus to the pseries machine. This instantiates
the qemu generic PCI bus code, advertises a PCI host bridge in the
guest's device tree and implements the RTAS methods specified by PAPR
to access PCI config space. It also sets up the memory regions we
need to provide windows into the PCI memory and IO space, and
advertises those to the guest.
However, because qemu can't yet emulate an IOMMU, which is mandatory on
pseries, PCI devices which use DMA (i.e. most of them) will not work with
this code alone. Still, this is enough to support the virtio_pci device
(which probably _should_ use emulated PCI DMA, but is specced to use
direct hypervisor access to guest physical memory instead).
[agraf] remove typedef which could cause compile errors
Signed-off-by: Alexey Kardashevskiy <aik@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
