Instead of using s->T0 or s->T1, create a scratch register
when computing the C, NC, L or LE conditions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using s->tmp0 or s->tmp4 as the result, just extend the cc_*
registers in place. It is harmless and, if multiple setcc instructions
are used, the optimizer will be able to remove the redundant ones.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_update_cc_op must be called before control flow splits. Doing it
in gen_jmp_rel{,_csize} may hide bugs, instead assert that cc_op is
clean---even if that means a few more calls to gen_update_cc_op().
With this new invariant, setting cc_op to CC_OP_DYNAMIC is unnecessary
since the caller should have done it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_update_cc_op must be called before control flow splits. Do it
where the jump on ECX!=0 is translated.
On the other hand, remove the call before gen_jcc1, which takes care of
it already, and explain why REPZ/REPNZ need not use CC_OP_DYNAMIC---the
translation block ends before any control-flow-dependent cc_op could
be observed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Resetting cc_op to CC_OP_DYNAMIC should be done at control flow junctions,
which is not the case here. This translation block is ending and the
only effect of calling set_cc_op() would be a discard of s->cc_srcT.
This discard is useless (it's a temporary, not a global) and in fact
prevents gen_prepare_cc from returning s->cc_srcT.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the introduction of TSTEQ and TSTNE the .mask field is always -1,
so remove all the now-unnecessary code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new conditions obviously come in handy when testing individual bits
of EFLAGS, and they make it possible to remove the .mask field of
CCPrepare.
Lowering to shift+and is done by the optimizer if necessary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When testing the sign bit or equality to zero of a partial register, it
is useful to use a single TSTEQ or TSTNE operation. It can also be used
to test the parity flag, using bit 0 of the population count.
Do not do this for target_ulong-sized values however; the optimizer would
produce a comparison against zero anyway, and it avoids shifts by 64
which are undefined behavior.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Observed the following failure while booting the SEV-SNP guest and the
guest fails to boot with the smp parameters:
"-smp 192,sockets=1,dies=12,cores=8,threads=2".
qemu-system-x86_64: sev_snp_launch_update: SNP_LAUNCH_UPDATE ret=-5 fw_error=22 'Invalid parameter'
qemu-system-x86_64: SEV-SNP: CPUID validation failed for function 0x8000001e, index: 0x0.
provided: eax:0x00000000, ebx: 0x00000100, ecx: 0x00000b00, edx: 0x00000000
expected: eax:0x00000000, ebx: 0x00000100, ecx: 0x00000300, edx: 0x00000000
qemu-system-x86_64: SEV-SNP: failed update CPUID page
Reason for the failure is due to overflowing of bits used for "Node per
processor" in CPUID Fn8000001E_ECX. This field's width is 3 bits wide and
can hold maximum value 0x7. With dies=12 (0xB), it overflows and spills
over into the reserved bits. In the case of SEV-SNP, this causes CPUID
enforcement failure and guest fails to boot.
The PPR documentation for CPUID_Fn8000001E_ECX [Node Identifiers]
=================================================================
Bits Description
31:11 Reserved.
10:8 NodesPerProcessor: Node per processor. Read-only.
ValidValues:
Value Description
0h 1 node per processor.
7h-1h Reserved.
7:0 NodeId: Node ID. Read-only. Reset: Fixed,XXh.
=================================================================
As in the spec, the valid value for "node per processor" is 0 and rest
are reserved.
Looking back at the history of decoding of CPUID_Fn8000001E_ECX, noticed
that there were cases where "node per processor" can be more than 1. It
is valid only for pre-F17h (pre-EPYC) architectures. For EPYC or later
CPUs, the linux kernel does not use this information to build the L3
topology.
Also noted that the CPUID Function 0x8000001E_ECX is available only when
TOPOEXT feature is enabled. This feature is enabled only for EPYC(F17h)
or later processors. So, previous generation of processors do not not
enumerate 0x8000001E_ECX leaf.
There could be some corner cases where the older guests could enable the
TOPOEXT feature by running with -cpu host, in which case legacy guests
might notice the topology change. To address those cases introduced a
new CPU property "legacy-multi-node". It will be true for older machine
types to maintain compatibility. By default, it will be false, so new
decoding will be used going forward.
The documentation is taken from Preliminary Processor Programming
Reference (PPR) for AMD Family 19h Model 11h, Revision B1 Processors 55901
Rev 0.25 - Oct 6, 2022.
Cc: qemu-stable@nongnu.org
Fixes: 31ada106d8 ("Simplify CPUID_8000_001E for AMD")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-ID: <0ee4b0a8293188a53970a2b0e4f4ef713425055e.1714757834.git.babu.moger@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Extract page-protection definitions to page-protection.h
- Rework in accel/tcg in preparation of extracting TCG fields from CPUState
- More uses of get_task_state() in user emulation
- Xen refactors in preparation for adding multiple map caches (Juergen & Edgar)
- MAINTAINERS updates (Aleksandar and Bin)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmY40CAACgkQ4+MsLN6t
wN5drxAA1oIsuUzpAJmlMIxZwlzbICiuexgn/HH9DwWNlrarKo7V1l4YB8jd9WOg
IKuj7c39kJKsDEB8BXApYwcly+l7DYdnAAI8Z7a+eN+ffKNl/0XBaLjsGf58RNwY
fb39/cXWI9ZxKxsHMSyjpiu68gOGvZ5JJqa30Fr+eOGuug9Fn/fOe1zC6l/dMagy
Dnym72stpD+hcsN5sVwohTBIk+7g9og1O/ctRx6Q3ZCOPz4p0+JNf8VUu43/reaR
294yRK++JrSMhOVFRzP+FH1G25NxiOrVCFXZsUTYU+qPDtdiKtjH1keI/sk7rwZ7
U573lesl7ewQFf1PvMdaVf0TrQyOe6kUGr9Mn2k8+KgjYRAjTAQk8V4Ric/+xXSU
0rd7Cz7lyQ8jm0DoOElROv+lTDQs4dvm3BopF3Bojo4xHLHd3SFhROVPG4tvGQ3H
72Q5UPR2Jr2QZKiImvPceUOg0z5XxoN6KRUkSEpMFOiTRkbwnrH59z/qPijUpe6v
8l5IlI9GjwkL7pcRensp1VC6e9KC7F5Od1J/2RLDw3UQllMQXqVw2bxD3CEtDRJL
QSZoS4d1jUCW4iAYdqh/8+2cOIPiCJ4ai5u7lSdjrIJkRErm32FV/pQLZauoHlT5
eTPUgzDoRXVgI1X1slTpVXlEEvRNbhZqSkYLkXr80MLn5hTafo0=
=3Qkg
-----END PGP SIGNATURE-----
Merge tag 'accel-20240506' of https://github.com/philmd/qemu into staging
Accelerator patches
- Extract page-protection definitions to page-protection.h
- Rework in accel/tcg in preparation of extracting TCG fields from CPUState
- More uses of get_task_state() in user emulation
- Xen refactors in preparation for adding multiple map caches (Juergen & Edgar)
- MAINTAINERS updates (Aleksandar and Bin)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmY40CAACgkQ4+MsLN6t
# wN5drxAA1oIsuUzpAJmlMIxZwlzbICiuexgn/HH9DwWNlrarKo7V1l4YB8jd9WOg
# IKuj7c39kJKsDEB8BXApYwcly+l7DYdnAAI8Z7a+eN+ffKNl/0XBaLjsGf58RNwY
# fb39/cXWI9ZxKxsHMSyjpiu68gOGvZ5JJqa30Fr+eOGuug9Fn/fOe1zC6l/dMagy
# Dnym72stpD+hcsN5sVwohTBIk+7g9og1O/ctRx6Q3ZCOPz4p0+JNf8VUu43/reaR
# 294yRK++JrSMhOVFRzP+FH1G25NxiOrVCFXZsUTYU+qPDtdiKtjH1keI/sk7rwZ7
# U573lesl7ewQFf1PvMdaVf0TrQyOe6kUGr9Mn2k8+KgjYRAjTAQk8V4Ric/+xXSU
# 0rd7Cz7lyQ8jm0DoOElROv+lTDQs4dvm3BopF3Bojo4xHLHd3SFhROVPG4tvGQ3H
# 72Q5UPR2Jr2QZKiImvPceUOg0z5XxoN6KRUkSEpMFOiTRkbwnrH59z/qPijUpe6v
# 8l5IlI9GjwkL7pcRensp1VC6e9KC7F5Od1J/2RLDw3UQllMQXqVw2bxD3CEtDRJL
# QSZoS4d1jUCW4iAYdqh/8+2cOIPiCJ4ai5u7lSdjrIJkRErm32FV/pQLZauoHlT5
# eTPUgzDoRXVgI1X1slTpVXlEEvRNbhZqSkYLkXr80MLn5hTafo0=
# =3Qkg
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 May 2024 05:42:08 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'accel-20240506' of https://github.com/philmd/qemu: (28 commits)
MAINTAINERS: Update my email address
MAINTAINERS: Update Aleksandar Rikalo email
system: Pass RAM MemoryRegion and is_write in xen_map_cache()
xen: mapcache: Break out xen_map_cache_init_single()
xen: mapcache: Break out xen_invalidate_map_cache_single()
xen: mapcache: Refactor xen_invalidate_map_cache_entry_unlocked
xen: mapcache: Refactor xen_replace_cache_entry_unlocked
xen: mapcache: Break out xen_ram_addr_from_mapcache_single
xen: mapcache: Refactor xen_remap_bucket for multi-instance
xen: mapcache: Refactor xen_map_cache for multi-instance
xen: mapcache: Refactor lock functions for multi-instance
xen: let xen_ram_addr_from_mapcache() return -1 in case of not found entry
system: let qemu_map_ram_ptr() use qemu_ram_ptr_length()
user: Use get_task_state() helper
user: Declare get_task_state() once in 'accel/tcg/vcpu-state.h'
user: Forward declare TaskState type definition
accel/tcg: Move @plugin_mem_cbs from CPUState to CPUNegativeOffsetState
accel/tcg: Restrict cpu_plugin_mem_cbs_enabled() to TCG
accel/tcg: Restrict qemu_plugin_vcpu_exit_hook() to TCG plugins
accel/tcg: Update CPUNegativeOffsetState::can_do_io field documentation
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* switch boards to "default y"
* allow building emulators without any board
* configs: list "implied" device groups in the default configs
* remove unnecessary declarations from typedefs.h
* target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY1ILsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNtIwf+MEehq2HudZvsK1M8FrvNmkB/AssO
x4tqL8DlTus23mQDBu9+rANTB93ManJdK9ybtf6NfjEwK+R8RJslLVnuy/qT+aQX
PD208L88fjZg17G8uyawwvD1VmqWzHFSN14ShmKzqB2yPXXo/1cJ30w78DbD50yC
6rw/xbC5j195CwE2u8eBcIyY4Hh2PUYEE4uyHbYVr57cMjfmmA5Pg4I4FJrpLrF3
eM2Avl/4pIbsW3zxXVB8QbAkgypxZErk3teDK1AkPJnlnBYM1jGKbt/GdKe7vcHR
V/o+7NlcbS3oHVItQ2gP3m91stjFq+NhixaZpa0VlmuqayBa3xNGl0G6OQ==
=ZbNW
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386: Introduce SapphireRapids-v3 to add missing features
* switch boards to "default y"
* allow building emulators without any board
* configs: list "implied" device groups in the default configs
* remove unnecessary declarations from typedefs.h
* target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY1ILsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNtIwf+MEehq2HudZvsK1M8FrvNmkB/AssO
# x4tqL8DlTus23mQDBu9+rANTB93ManJdK9ybtf6NfjEwK+R8RJslLVnuy/qT+aQX
# PD208L88fjZg17G8uyawwvD1VmqWzHFSN14ShmKzqB2yPXXo/1cJ30w78DbD50yC
# 6rw/xbC5j195CwE2u8eBcIyY4Hh2PUYEE4uyHbYVr57cMjfmmA5Pg4I4FJrpLrF3
# eM2Avl/4pIbsW3zxXVB8QbAkgypxZErk3teDK1AkPJnlnBYM1jGKbt/GdKe7vcHR
# V/o+7NlcbS3oHVItQ2gP3m91stjFq+NhixaZpa0VlmuqayBa3xNGl0G6OQ==
# =ZbNW
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 May 2024 10:36:59 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
qga/commands-posix: fix typo in qmp_guest_set_user_password
migration: do not include coroutine_int.h
kvm: move target-dependent interrupt routing out of kvm-all.c
pci: remove some types from typedefs.h
tcg: remove CPU* types from typedefs.h
display: remove GraphicHwOps from typedefs.h
qapi/machine: remove types from typedefs.h
monitor: remove MonitorDef from typedefs.h
migration: remove PostcopyDiscardState from typedefs.h
lockable: remove QemuLockable from typedefs.h
intc: remove PICCommonState from typedefs.h
qemu-option: remove QemuOpt from typedefs.h
net: remove AnnounceTimer from typedefs.h
numa: remove types from typedefs.h
qdev-core: remove DeviceListener from typedefs.h
fw_cfg: remove useless declarations from typedefs.h
build: do not build virtio-vga-gl if virgl/opengl not available
bitmap: Use g_try_new0/g_new0/g_renew
target/i386: Introduce SapphireRapids-v3 to add missing features
docs: document new convention for Kconfig board symbols
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
Add the missing features(ss, tsc-adjust, cldemote, movdiri, movdir64b) in
the SapphireRapids-v3 CPU model.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Message-ID: <20240424072912.43188-1-lei4.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
Continue with i386.
No changes to generated config-devices.mak files, other than
adding CONFIG_I386 to the x86_64-softmmu target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When mechanically moving the @dirty field to AccelCPUState
in commit 9ad49538c7, we neglected cpu->accel is still NULL
when we want to dereference it.
Fixes: 9ad49538c7 ("accel/whpx: Use accel-specific per-vcpu @dirty field")
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Suggested-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240429091918.27429-2-philmd@linaro.org>
When mechanically moving the @dirty field to AccelCPUState
in commit 79f1926b2d, we neglected cpu->accel is still NULL
when we want to dereference it.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Suggested-by: Volker Rümelin <vr_qemu@t-online.de>
Fixes: 79f1926b2d ("accel/nvmm: Use accel-specific per-vcpu @dirty field")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240429091918.27429-3-philmd@linaro.org>
KVM code might have to call functions on the PCIDevice that is
passed to kvm_arch_fixup_msi_route(). This fails in the case
where --without-default-devices is used and no board is
configured. While this is not really a useful configuration,
and therefore setting up stubs for CONFIG_PCI is overkill,
failing the build is impolite. Just include the PCI
subsystem if kvm_arch_fixup_msi_route() requires it, as
is the case for ARM and x86.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulated with QEMU, interrupts will never come in the following
loop. However, if the NOP instruction is uncommented, interrupts will
fire as normal.
loop:
cli
call do_sti
jmp loop
do_sti:
sti
# nop
ret
This behavior is different from that of a real processor. For example,
if KVM is enabled, interrupts will always fire regardless of whether the
NOP instruction is commented or not. Also, the Intel Software Developer
Manual states that after the STI instruction is executed, the interrupt
inhibit should end as soon as the next instruction (e.g., the RET
instruction if the NOP instruction is commented) is executed.
This problem is caused because the previous code may choose not to end
the TB even if the HF_INHIBIT_IRQ_MASK has just been reset (e.g., in the
case where the STI instruction is immediately followed by the RET
instruction), so that IRQs may not have a change to trigger. This commit
fixes the problem by always terminating the current TB to give IRQs a
chance to trigger when HF_INHIBIT_IRQ_MASK is reset.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Message-ID: <20240415064518.4951-4-lrh2000@pku.edu.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Printing an "x86" in front of each CPU name is not helpful at all:
It is confusing for the users since they don't know whether they
have to specify these letters for the "-cpu" parameter, too, and
it also takes some precious space in the dense output of the CPU
entries. Let's simply remove this now and use two spaces at the
beginning of the lines for the indentation of the entries instead,
like most other target architectures are doing it for their CPU help
output already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
HVF has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-4-philmd@linaro.org>
NVMM has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-3-philmd@linaro.org>
WHPX has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-2-philmd@linaro.org>
The XRSTOR instruction ends calling tlb_flush(), declared
in "exec/exec-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-13-philmd@linaro.org>
accel/tcg/ files requires the following definitions:
- TARGET_LONG_BITS
- TARGET_PAGE_BITS
- TARGET_PHYS_ADDR_SPACE_BITS
- TCG_GUEST_DEFAULT_MO
The first 3 are defined in "cpu-param.h". The last one
in "cpu.h", with a bunch of definitions irrelevant for
TCG. By moving the TCG_GUEST_DEFAULT_MO definition to
"cpu-param.h", we can simplify various accel/tcg includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20231211212003.21686-4-philmd@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
Move APIC related code split in cpu-sysemu.c and
monitor.c to cpu-apic.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240321154838.95771-4-philmd@linaro.org>
The various Intel CPU manuals claim that SGDT and SIDT can write either 24-bits
or 32-bits depending upon the operand size, but this is incorrect. Not only do
the Intel CPU manuals give contradictory information between processor
revisions, but this information doesn't even match real-life behaviour.
In fact, tests on real hardware show that the CPU always writes 32-bits for SGDT
and SIDT, and this behaviour is required for at least OS/2 Warp and WFW 3.11 with
Win32s to function correctly. Remove the masking applied due to the operand size
for SGDT and SIDT so that the TCG behaviour matches the behaviour on real
hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2198
--
MCA: Whilst I don't have a copy of OS/2 Warp handy, I've confirmed that this
patch fixes the issue in WFW 3.11 with Win32s. For more technical information I
highly recommend the excellent write-up at
https://www.os2museum.com/wp/sgdtsidt-fiction-and-reality/.
Message-ID: <20240419195147.434894-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the difference between warn_report_once() and
error_report_once() is the former has the "warning:" prefix, while the
latter does not have a similar level prefix.
At the meantime, considering that there is no error handling logic here,
and the purpose of error_report_once() is only to prompt the user with
an abnormal message, there is no need to use an error-level message here,
and instead we can just use a warning.
Therefore, downgrade the message in error_report_once() to warning, and
merge it into the previous warn_report_once().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240327103951.3853425-4-zhao1.liu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The difference between error_printf() and error_report() is the latter
may contain more information, such as the name of the program
("qemu-system-x86_64").
Thus its variant error_report_once() and warn_report()'s variant
warn_report_once() can be used here to print the information only once
without a static local variable "ht_warned".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240327103951.3853425-3-zhao1.liu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use warn_report_once() to get rid of the static local variable "warned".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240327103951.3853425-2-zhao1.liu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer 9.1 machine types will default to using the KVM_SEV_INIT2 API for
creating SEV/SEV-ES going forward. However, this API results in guest
measurement changes which are generally not expected for users of these
older guest types and can cause disruption if they switch to a newer
QEMU/kernel version. Avoid this by continuing to use the older
KVM_SEV_INIT/KVM_SEV_ES_INIT APIs for older machine types.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240409230743.962513-4-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU will currently automatically make use of the KVM_SEV_INIT2 API for
initializing SEV and SEV-ES guests verses the older
KVM_SEV_INIT/KVM_SEV_ES_INIT interfaces.
However, the older interfaces will silently avoid sync'ing FPU/XSAVE
state to the VMSA prior to encryption, thus relying on behavior and
measurements that assume the related fields to be allow zero.
With KVM_SEV_INIT2, this state is now synced into the VMSA, resulting in
measurements changes and, theoretically, behaviorial changes, though the
latter are unlikely to be seen in practice.
To allow a smooth transition to the newer interface, while still
providing a mechanism to maintain backward compatibility with VMs
created using the older interfaces, provide a new command-line
parameter:
-object sev-guest,legacy-vm-type=true,...
and have it default to false.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240409230743.962513-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement support for the KVM_X86_SEV_VM and KVM_X86_SEV_ES_VM virtual
machine types, and the KVM_SEV_INIT2 function of KVM_MEMORY_ENCRYPT_OP.
These replace the KVM_SEV_INIT and KVM_SEV_ES_INIT functions, and have
several advantages:
- sharing the initialization sequence with SEV-SNP and TDX
- allowing arguments including the set of desired VMSA features
- protection against invalid use of KVM_GET/SET_* ioctls for guests
with encrypted state
If the KVM_X86_SEV_VM and KVM_X86_SEV_ES_VM types are not supported,
fall back to KVM_SEV_INIT and KVM_SEV_ES_INIT (which use the
default x86 VM type).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM is introducing a new API to create confidential guests, which
will be used by TDX and SEV-SNP but is also available for SEV and
SEV-ES. The API uses the VM type argument to KVM_CREATE_VM to
identify which confidential computing technology to use.
Since there are no other expected uses of VM types, delegate
mc->kvm_type() for x86 boards to the confidential-guest-support
object pointed to by ms->cgs.
For example, if a sev-guest object is specified to confidential-guest-support,
like,
qemu -machine ...,confidential-guest-support=sev0 \
-object sev-guest,id=sev0,...
it will check if a VM type KVM_X86_SEV_VM or KVM_X86_SEV_ES_VM
is supported, and if so use them together with the KVM_SEV_INIT2
function of the KVM_MEMORY_ENCRYPT_OP ioctl. If not, it will fall back to
KVM_SEV_INIT and KVM_SEV_ES_INIT.
This is a preparatory work towards TDX and SEV-SNP support, but it
will also enable support for VMSA features such as DebugSwap, which
are only available via KVM_SEV_INIT2.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a common superclass for x86 confidential guest implementations.
It will extend ConfidentialGuestSupportClass with a method that provides
the VM type to be passed to KVM_CREATE_VM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Board reset requires writing a fresh CPU state. As far as KVM is
concerned, the only thing that blocks reset is that CPU state is
encrypted; therefore, kvm_cpus_are_resettable() can simply check
if that is the case.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far, KVM has allowed KVM_GET/SET_* ioctls to execute even if the
guest state is encrypted, in which case they do nothing. For the new
API using VM types, instead, the ioctls will fail which is a safer and
more robust approach.
The new API will be the only one available for SEV-SNP and TDX, but it
is also usable for SEV and SEV-ES. In preparation for that, require
architecture-specific KVM code to communicate the point at which guest
state is protected (which must be after kvm_cpu_synchronize_post_init(),
though that might change in the future in order to suppor migration).
From that point, skip reading registers so that cpu->vcpu_dirty is
never true: if it ever becomes true, kvm_arch_put_registers() will
fail miserably.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use confidential_guest_kvm_init() instead of calling SEV
specific sev_kvm_init(). This allows the introduction of multiple
confidential-guest-support subclasses for different x86 vendors.
As a bonus, stubs are not needed anymore since there is no
direct call from target/i386/kvm/kvm.c to SEV code.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20240229060038.606591-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register File Data Sampling (RFDS) is a CPU side-channel vulnerability
that may expose stale register value. CPUs that set RFDS_NO bit in MSR
IA32_ARCH_CAPABILITIES indicate that they are not vulnerable to RFDS.
Similarly, RFDS_CLEAR indicates that CPU is affected by RFDS, and has
the microcode to help mitigate RFDS.
Make RFDS_CLEAR and RFDS_NO bits available to guests.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <9a38877857392b5c2deae7e7db1b170d15510314.1710341348.git.pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to table 1-2 in Intel Architecture Instruction Set Extensions and
Future Features (rev 051) [1], SierraForest has the following new features
which have already been virtualized:
- CMPCCXADD CPUID.(EAX=7,ECX=1):EAX[bit 7]
- AVX-IFMA CPUID.(EAX=7,ECX=1):EAX[bit 23]
- AVX-VNNI-INT8 CPUID.(EAX=7,ECX=1):EDX[bit 4]
- AVX-NE-CONVERT CPUID.(EAX=7,ECX=1):EDX[bit 5]
Add above features to new CPU model SierraForest. Comparing with GraniteRapids
CPU model, SierraForest bare-metal removes the following features:
- HLE CPUID.(EAX=7,ECX=0):EBX[bit 4]
- RTM CPUID.(EAX=7,ECX=0):EBX[bit 11]
- AVX512F CPUID.(EAX=7,ECX=0):EBX[bit 16]
- AVX512DQ CPUID.(EAX=7,ECX=0):EBX[bit 17]
- AVX512_IFMA CPUID.(EAX=7,ECX=0):EBX[bit 21]
- AVX512CD CPUID.(EAX=7,ECX=0):EBX[bit 28]
- AVX512BW CPUID.(EAX=7,ECX=0):EBX[bit 30]
- AVX512VL CPUID.(EAX=7,ECX=0):EBX[bit 31]
- AVX512_VBMI CPUID.(EAX=7,ECX=0):ECX[bit 1]
- AVX512_VBMI2 CPUID.(EAX=7,ECX=0):ECX[bit 6]
- AVX512_VNNI CPUID.(EAX=7,ECX=0):ECX[bit 11]
- AVX512_BITALG CPUID.(EAX=7,ECX=0):ECX[bit 12]
- AVX512_VPOPCNTDQ CPUID.(EAX=7,ECX=0):ECX[bit 14]
- LA57 CPUID.(EAX=7,ECX=0):ECX[bit 16]
- TSXLDTRK CPUID.(EAX=7,ECX=0):EDX[bit 16]
- AMX-BF16 CPUID.(EAX=7,ECX=0):EDX[bit 22]
- AVX512_FP16 CPUID.(EAX=7,ECX=0):EDX[bit 23]
- AMX-TILE CPUID.(EAX=7,ECX=0):EDX[bit 24]
- AMX-INT8 CPUID.(EAX=7,ECX=0):EDX[bit 25]
- AVX512_BF16 CPUID.(EAX=7,ECX=1):EAX[bit 5]
- fast zero-length MOVSB CPUID.(EAX=7,ECX=1):EAX[bit 10]
- fast short CMPSB, SCASB CPUID.(EAX=7,ECX=1):EAX[bit 12]
- AMX-FP16 CPUID.(EAX=7,ECX=1):EAX[bit 21]
- PREFETCHI CPUID.(EAX=7,ECX=1):EDX[bit 14]
- XFD CPUID.(EAX=0xD,ECX=1):EAX[bit 4]
- EPT_PAGE_WALK_LENGTH_5 VMX_EPT_VPID_CAP(0x48c)[bit 7]
Add all features of GraniteRapids CPU model except above features to
SierraForest CPU model.
SierraForest doesn’t support TSX and RTM but supports TAA_NO. When RTM is
not enabled in host, KVM will not report TAA_NO. So, just don't include
TAA_NO in SierraForest CPU model.
[1] https://cdrdv2.intel.com/v1/dl/getContent/671368
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20240320021044.508263-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When start L2 guest with both L1/L2 using Icelake-Server-v3 or above,
QEMU reports below warning:
"warning: host doesn't support requested feature: MSR(10AH).taa-no [bit 8]"
Reason is QEMU Icelake-Server-v3 has TSX feature disabled but enables taa-no
bit. It's meaningless that TSX isn't supported but still claim TSX is secure.
So L1 KVM doesn't expose taa-no to L2 if TSX is unsupported, then starting L2
triggers the warning.
Fix it by introducing a new version Icelake-Server-v7 which has both TSX
and taa-no features. Then guest can use TSX securely when it see taa-no.
This matches the production Icelake which supports TSX and isn't susceptible
to TSX Async Abort (TAA) vulnerabilities, a.k.a, taa-no.
Ideally, TSX should have being enabled together with taa-no since v3, but for
compatibility, we'd better to add v7 to enable it.
Fixes: d965dc3559 ("target/i386: Add ARCH_CAPABILITIES related bits into Icelake-Server CPU model")
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-ID: <20240320093138.80267-2-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the architectural (for lack of a better term) CPUID leaf generation
to a separate helper so that the generation code can be reused by TDX,
which needs to generate a canonical VM-scoped configuration.
For now this is just a cleanup, so keep the function static.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20240229063726.610065-23-xiaoyao.li@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Query kvm for supported guest physical address bits, in cpuid
function 80000008, eax[23:16]. Usually this is identical to host
physical address bits. With NPT or EPT being used this might be
restricted to 48 (max 4-level paging address space size) even if
the host cpu supports more physical address bits.
When set pass this to the guest, using cpuid too. Guest firmware
can use this to figure how big the usable guest physical address
space is, so PCI bar mapping are actually reachable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240318155336.156197-2-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allows to set guest-phys-bits (cpuid leaf 80000008, eax[23:16])
via -cpu $model,guest-phys-bits=$nr.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240318155336.156197-3-kraxel@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When aborting translation of the current insn, restore the
previous value of insn_start.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Jørgen Hansen <Jorgen.Hansen@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
See previous commit and commit 9de9fa5cf2 ("Avoid using inlined
functions with external linkage") for rationale.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313184954.42513-3-philmd@linaro.org>
CXL emulation of interleave requires read and write hooks due to
requirement for subpage granularity. The Linux kernel stack now enables
using this memory as conventional memory in a separate NUMA node. If a
process is deliberately forced to run from that node
$ numactl --membind=1 ls
the page table walk on i386 fails.
Useful part of backtrace:
(cpu=cpu@entry=0x555556fd9000, fmt=fmt@entry=0x555555fe3378 "cpu_io_recompile: could not find TB for pc=%p")
at ../../cpu-target.c:359
(retaddr=0, addr=19595792376, attrs=..., xlat=<optimized out>, cpu=0x555556fd9000, out_offset=<synthetic pointer>)
at ../../accel/tcg/cputlb.c:1339
(cpu=0x555556fd9000, full=0x7fffee0d96e0, ret_be=ret_be@entry=0, addr=19595792376, size=size@entry=8, mmu_idx=4, type=MMU_DATA_LOAD, ra=0) at ../../accel/tcg/cputlb.c:2030
(cpu=cpu@entry=0x555556fd9000, p=p@entry=0x7ffff56fddc0, mmu_idx=<optimized out>, type=type@entry=MMU_DATA_LOAD, memop=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/cputlb.c:2356
(cpu=cpu@entry=0x555556fd9000, addr=addr@entry=19595792376, oi=oi@entry=52, ra=ra@entry=0, access_type=access_type@entry=MMU_DATA_LOAD) at ../../accel/tcg/cputlb.c:2439
at ../../accel/tcg/ldst_common.c.inc:301
at ../../target/i386/tcg/sysemu/excp_helper.c:173
(err=0x7ffff56fdf80, out=0x7ffff56fdf70, mmu_idx=0, access_type=MMU_INST_FETCH, addr=18446744072116178925, env=0x555556fdb7c0)
at ../../target/i386/tcg/sysemu/excp_helper.c:578
(cs=0x555556fd9000, addr=18446744072116178925, size=<optimized out>, access_type=MMU_INST_FETCH, mmu_idx=0, probe=<optimized out>, retaddr=0) at ../../target/i386/tcg/sysemu/excp_helper.c:604
Avoid this by plumbing the address all the way down from
x86_cpu_tlb_fill() where is available as retaddr to the actual accessors
which provide it to probe_access_full() which already handles MMIO accesses.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2180
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2220
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20240307155304.31241-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
