Moving the following instructions to decodetree specification:
xvcmp{eq, gt, ge, ne}{s, d}p : XX3-form
The changes were verified by validating that the tcg-ops generated for those
instructions remain the same which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
lxv{b16, d2, h8, w4, ds, ws}x : X-form
stxv{b16, d2, h8, w4}x : X-form
The changes were verified by validating that the tcg-ops generated for those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
{l, st}xvl(l) : X-form
The changes were verified by validating that the tcg-ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also added a new function do_ea_calc_ra to calculate the effective address :
EA <- (RA == 0) ? 0 : GPR[RA], which is now used by the above-said insns,
and shall be used later by (p){lx, stx}vp insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: Fix 32-bit build]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
lxs{d, iwa, ibz, ihz, iwz, sp}x : X-form
stxs{d, ib, ih, iw, sp}x : X-form
The changes were verified by validating that the tcg-ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
xxl{and, andc, or, orc, nor, xor, nand, eqv} : XX3-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
x{s, v}{add, sub, mul, div}{s, d}p : XX3-form
xs{max, min}dp, xv{max, min}{s, d}p : XX3-form
The changes were verfied by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
v{add,sub}{u,s}{b,h,w}s : VX-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
attn is an implementation-specific instruction that on POWER (and G5/
970) can be enabled with a HID bit (disabled = illegal), and executing
it causes the host processor to stop and the service processor to be
notified. Generally used for debugging.
Implement attn and make it checkstop the system, which should be good
enough for QEMU debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the clrbhrb and mfbhrbe instructions.
Since neither instruction is believed to be critical to
performance, both instructions were implemented using helper
functions.
Access to both instructions is controlled by bits in the
HFSCR (for privileged state) and MMCR0 (for problem state).
A new function, helper_mmcr0_facility_check, was added for
checking MMCR0[BHRBA] and raising a facility_unavailable exception
if required.
NOTE: For P8 and P9, due to a performance issue, branch history will
not be kept, but the instructions will be allowed to execute
as normal with the exception that the mfbhrbe instruction will
always return a zero value.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
v{max, min}{u, s}{b, h, w, d} : VX-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
v{and, andc, nand, or, orc, nor, xor, eqv} : VX-form
The changes were verified by validating that the tcp ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
{l,st}ve{b,h,w}x,
{l,st}v{x,xl},
lvs{l,r} : X-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
andi[s]., {ori, xori}[s] : D-form
{and, andc, nand, or, orc, nor, xor, eqv}[.],
exts{b, h, w}[.], cnt{l, t}z{w, d}[.],
popcnt{b, w, d}, prty{w, d}, cmp, bpermd : X-form
With this patch, all the fixed-point logical instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
cmp{rb, eqb}, t{w, d} : X-form
t{w, d}i : D-form
isel : A-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also for CMPRB, following review comments :
Replaced repetition of arithmetic right shifting (tcg_gen_shri_i32) followed
by extraction of last 8 bits (tcg_gen_ext8u_i32) with extraction of the required
bits using offsets (tcg_gen_extract_i32).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
divd[u, e, eu][o][.] : XO-form
mod{sd, ud} : X-form
With this patch, all the fixed-point arithmetic instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also, remaned do_divwe method in fixedpoint-impl.c.inc to do_dive because it is
now used to divide doubleword operands as well, and not just words.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree :
mul{ld, ldo, hd, hdu}[.] : XO-form
madd{hd, hdu, ld} : VA-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op'
flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
neg[o][.] : XO-form
mod{sw, uw}, darn : X-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
divw[u, e, eu][o][.] : XO-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
mulli : D-form
mul{lw, lwo, hw, hwu}[.] : XO-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Also cleaned up code for mullw[o][.] as per review comments while
keeping the logic of the tcg ops generated semantically same.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This patch moves the below instructions to decodetree specification :
f{add, sub, mul, div, re, rsqrte, madd, msub, nmadd, nmsub}[s][.] : A-form
ft{div, sqrt} : X-form
With this patch, all the floating-point arithmetic instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER10 adds a new field to sync for store-store syncs, and some
new variants of the existing syncs that include persistent memory.
Implement the store-store syncs and plwsync/phwsync.
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This tries to faithfully reproduce the odd BookE logic. Note the
e206 check in gen_msync_4xx() is always false, so not carried over.
It does change the handling of non-zero reserved bits outside the
defined fields from being illegal to being ignored, which the
architecture specifies ot help with backward compatibility of new
fields. The existing behaviour causes illegal instruction exceptions
when using new POWER10 sync variants that add new fields, after this
the instructions are accepted and are implemented as supersets of
the new behaviour, as intended.
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This patch moves the below instructions to decodetree specification:
{add, subf}[c,e,me,ze][o][.] : XO-form
addic[.], subfic : D-form
addex : Z23-form
This patch introduces XO form instructions into decode tree
specification, for which all the four variations([o][.]) have been
handled with a single pattern. The changes were verified by validating
that the tcg ops generated by those instructions remain the same, which
were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The following commits changed the code such that the fallback to MFSS for MFFSCRN,
MFFSCRNI, MFFSCE and MFFSL on pre 3.0 ISAs was removed and became an illegal instruction:
bf8adfd88b - target/ppc: Move mffscrn[i] to decodetree
394c2e2fda - target/ppc: Move mffsce to decodetree
3e5bce70ef - target/ppc: Move mffsl to decodetree
The hardware will handle them as a MFFS instruction as the code did previously.
This means applications that were segfaulting under qemu when encountering these
instructions which is used in glibc libm functions for example.
The fallback for MFFSCDRN and MFFSCDRNI added in a later patch was also missing.
This patch restores the fallback to MFSS for these instructions on pre 3.0s ISAs
as the hardware decoder would, fixing the segfaulting libm code. It doesn't have
the fallback for 3.0 onwards to match hardware behaviour.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230510111913.1718734-1-richard.purdie@linuxfoundation.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved XSTSTDCSP, XSTSTDCDP and XSTSTDCQP to decodetree and moved some of
its decoding away from the helper as previously the DCMX, XB and BF were
calculated in the helper with the help of cpu_env, now that part was
moved to the decodetree with the rest.
xvtstdcsp:
rept loop master patch
8 12500 1,85393600 1,94683600 (+5.0%)
25 4000 1,78779800 1,92479000 (+7.7%)
100 1000 2,12775000 2,28895500 (+7.6%)
500 200 2,99655300 3,23102900 (+7.8%)
2500 40 6,89082200 7,44827500 (+8.1%)
8000 12 17,50585500 18,95152100 (+8.3%)
xvtstdcdp:
rept loop master patch
8 12500 1,39043100 1,33539800 (-4.0%)
25 4000 1,35731800 1,37347800 (+1.2%)
100 1000 1,51514800 1,56053000 (+3.0%)
500 200 2,21014400 2,47906000 (+12.2%)
2500 40 5,39488200 6,68766700 (+24.0%)
8000 12 13,98623900 18,17661900 (+30.0%)
xvtstdcdp:
rept loop master patch
8 12500 1,35123800 1,34455800 (-0.5%)
25 4000 1,36441200 1,36759600 (+0.2%)
100 1000 1,49763500 1,54138400 (+2.9%)
500 200 2,19020200 2,46196400 (+12.4%)
2500 40 5,39265700 6,68147900 (+23.9%)
8000 12 14,04163600 18,19669600 (+29.6%)
As some values are now decoded outside the helper and passed to it as an
argument the number of arguments of the helper increased, the number
of TCGop needed to load the arguments increased. I suspect that's why
the slow-down in the tests with a high REPT but low LOOP.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-12-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved XVTSTDCSP and XVTSTDCDP to decodetree an restructured the helper
to be simpler and do all decoding in the decodetree (so XB, XT and DCMX
are all calculated outside the helper).
Obs: The tests in this one are slightly different, these are the sum of
these instructions with all possible immediate and those instructions
are repeated 10 times.
xvtstdcsp:
rept loop master patch
8 12500 2,76402100 2,70699100 (-2.1%)
25 4000 2,64867100 2,67884100 (+1.1%)
100 1000 2,73806300 2,78701000 (+1.8%)
500 200 3,44666500 3,61027600 (+4.7%)
2500 40 5,85790200 6,47475500 (+10.5%)
8000 12 15,22102100 17,46062900 (+14.7%)
xvtstdcdp:
rept loop master patch
8 12500 2,11818000 1,61065300 (-24.0%)
25 4000 2,04573400 1,60132200 (-21.7%)
100 1000 2,13834100 1,69988100 (-20.5%)
500 200 2,73977000 2,48631700 (-9.3%)
2500 40 5,05067000 5,25914100 (+4.1%)
8000 12 14,60507800 15,93704900 (+9.1%)
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-11-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved VPRTYBW and VPRTYBD to use gvec and both of them and VPRTYBQ to
decodetree. VPRTYBW and VPRTYBD now also use .fni4 and .fni8,
respectively.
vprtybw:
rept loop master patch
8 12500 0,01198900 0,00703100 (-41.4%)
25 4000 0,01070100 0,00571400 (-46.6%)
100 1000 0,01123300 0,00678200 (-39.6%)
500 200 0,01601500 0,01535600 (-4.1%)
2500 40 0,03872900 0,05562100 (43.6%)
8000 12 0,10047000 0,16643000 (65.7%)
vprtybd:
rept loop master patch
8 12500 0,00757700 0,00788100 (4.0%)
25 4000 0,00652500 0,00669600 (2.6%)
100 1000 0,00714400 0,00825400 (15.5%)
500 200 0,01211000 0,01903700 (57.2%)
2500 40 0,03483800 0,07021200 (101.5%)
8000 12 0,09591800 0,21036200 (119.3%)
vprtybq:
rept loop master patch
8 12500 0,00675600 0,00667200 (-1.2%)
25 4000 0,00619400 0,00643200 (3.8%)
100 1000 0,00707100 0,00751100 (6.2%)
500 200 0,01199300 0,01342000 (11.9%)
2500 40 0,03490900 0,04092900 (17.2%)
8000 12 0,09588200 0,11465100 (19.6%)
I wasn't expecting such a performance lost in both VPRTYBD and VPRTYBQ,
I'm not sure if it's worth to move those instructions. Comparing the
assembly of the helper with the TCGop they are pretty similar, so
I'm not sure why vprtybd took so much more time.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-6-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch moves VADDCUW and VSUBCUW to decodtree with gvec using an
implementation based on the helper, with the main difference being
changing the -1 (aka all bits set to 1) result returned by cmp when
true to +1. It also implemented a .fni4 version of those instructions
and dropped the helper.
vaddcuw:
rept loop master patch
8 12500 0,01008200 0,00612400 (-39.3%)
25 4000 0,01091500 0,00471600 (-56.8%)
100 1000 0,01332500 0,00593700 (-55.4%)
500 200 0,01998500 0,01275700 (-36.2%)
2500 40 0,04704300 0,04364300 (-7.2%)
8000 12 0,10748200 0,11241000 (+4.6%)
vsubcuw:
rept loop master patch
8 12500 0,01226200 0,00571600 (-53.4%)
25 4000 0,01493500 0,00462100 (-69.1%)
100 1000 0,01522700 0,00455100 (-70.1%)
500 200 0,02384600 0,01133500 (-52.5%)
2500 40 0,04935200 0,03178100 (-35.6%)
8000 12 0,09039900 0,09440600 (+4.4%)
Overall there was a gain in performance, but the TCGop code was still
slightly bigger in the new version (it went from 4 to 5).
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-4-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch moves VMLADDUHM to decodetree a creates a gvec implementation
using mul_vec and add_vec.
rept loop master patch
8 12500 0,01810500 0,00903100 (-50.1%)
25 4000 0,01739400 0,00747700 (-57.0%)
100 1000 0,01843600 0,00901400 (-51.1%)
500 200 0,02574600 0,01971000 (-23.4%)
2500 40 0,05921600 0,07121800 (+20.3%)
8000 12 0,15326700 0,21725200 (+41.7%)
The significant difference in performance when REPT is low and LOOP is
high I think is due to the fact that the new implementation has a higher
translation time, as when using a helper only 5 TCGop are used but with
the patch a total of 10 TCGop are needed (Power lacks a direct mul_vec
equivalent so this instruction is implemented with the help of 5 others,
vmuleu, vmulou, vmrgh, vmrgl and vpkum).
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implementation for instructions hashstp and hashchkp, the privileged
versions of hashst and hashchk, which were added in Power ISA 3.1B.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220715205439.161110-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implementation for instructions hashst and hashchk, which were added
in Power ISA 3.1B.
It was decided to implement the hash algorithm from ground up in this
patch exactly as described in Power ISA.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220715205439.161110-3-victor.colombo@eldorado.org.br>
[danielhb: fix block comment in excp_helper.c]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
