The MIPS ISA release 6 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-16-f4bug@amsat.org>
The MIPS ISA release 5 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-15-f4bug@amsat.org>
The MIPS ISA release 3 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-14-f4bug@amsat.org>
The MIPS ISA release 2 is common to 32/64-bit CPUs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-13-f4bug@amsat.org>
The MIPS ISA release '1' is common to 32/64-bit CPUs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-12-f4bug@amsat.org>
Use the single ISA_MIPS32R6 definition to check if the Release 6
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R6 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-11-f4bug@amsat.org>
Use the single ISA_MIPS32R5 definition to check if the Release 5
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R5 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-10-f4bug@amsat.org>
Use the single ISA_MIPS32R3 definition to check if the Release 3
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R3 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-9-f4bug@amsat.org>
Use the single ISA_MIPS32R2 definition to check if the Release 2
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R2 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-8-f4bug@amsat.org>
Use the single ISA_MIPS32 definition to check if the Release 1
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R1 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-7-f4bug@amsat.org>
Directly check if the CPU supports 64-bit with the recently
added cpu_type_is_64bit() helper (inlined).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-6-f4bug@amsat.org>
MIPS 64-bit ISA is introduced with MIPS3.
Introduce the CPU_MIPS64 definition aliased to the MIPS3 ISA,
and the cpu_type_is_64bit() method to check if a CPU supports
this ISA (thus is 64-bit).
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-5-f4bug@amsat.org>
'CPU_MIPS32' and 'CPU_MIPS64' definitions concern CPUs implementing
the "Release 1" ISA. Rename it with the 'R1' suffix, as the other
CPU definitions do.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-4-f4bug@amsat.org>
Move CPU_MIPS5 after CPU_MIPS4 :)
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-3-f4bug@amsat.org>
Remove a comment added 12 years ago but never used (commit
b6d96beda3: "Use temporary registers for the MIPS FPU emulation").
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-2-f4bug@amsat.org>
It's useful for bootloader to do I/O operations.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Message-Id: <20201215064507.30148-3-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-3-f4bug@amsat.org>
The MIPS3 and MIPS32/64 ISA use different definitions
for the CP0 Config0 register.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-2-f4bug@amsat.org>
When decodetree.py was added in commit 568ae7efae, QEMU was
using Python 2 which happily reads UTF-8 files in text mode.
Python 3 requires either UTF-8 locale or an explicit encoding
passed to open(). Now that Python 3 is required, explicit
UTF-8 encoding for decodetree source files.
To avoid further problems with the user locale, also explicit
UTF-8 encoding for the generated C files.
Explicit both input/output are plain text by using the 't' mode.
This fixes:
$ /usr/bin/python3 scripts/decodetree.py test.decode
Traceback (most recent call last):
File "scripts/decodetree.py", line 1397, in <module>
main()
File "scripts/decodetree.py", line 1308, in main
parse_file(f, toppat)
File "scripts/decodetree.py", line 994, in parse_file
for line in f:
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 80:
ordinal not in range(128)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210110000240.761122-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Improve rotrv_vec to reduce "t1 = -v2, t2 = t1 + c" to
"t1 = -v2, t2 = c - v2". This avoids a serial dependency
between t1 and t2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Improve expand_vec_shi to use sign-extraction for MO_32.
This allows a single VSPLTISB instruction to load all of
the valid shift constants.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These interfaces have been replaced by tcg_gen_dupi_vec
and tcg_constant_vec.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several ways we can expand a vector dup of a 64-bit
element on a 32-bit host.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are now completely covered by mov from a
TYPE_CONST temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The normal movi opcodes are going away. We need something
for TCI to use internally.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We must do this before we adjust tcg_out_movi_i32, lest the
under-the-hood poking that we do for icount be broken.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because we now store uint64_t in TCGTemp, we can now always
store the full 64-bit duplicate immediate. So remove the
difference between 32- and 64-bit hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allocate a large block for indexing. Instead, allocate
for each temporary as they are seen.
In general, this will use less memory, if we consider that most
TBs do not touch every target register. This also allows us to
allocate TempOptInfo for new temps created during optimization.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These will hold a single constant for the duration of the TB.
They are hashed, so that each value has one temp across the TB.
Not used yet, this is all infrastructure.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This propagates the extended value of TCGTemp.val that we did before.
In addition, it will be required for vector constants.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix this name vs our coding style.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will reduce the differences between 32-bit and 64-bit hosts,
allowing full 64-bit constants to be created with the same interface.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In most, but not all, places that we check for TEMP_FIXED,
we are really testing that we do not modify the temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The temp_fixed, temp_global, temp_local bits are all related.
Combine them into a single enumeration.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we don't store more than tcg_target_long in TCGTemp,
we shouldn't be limited to that for code generation. We will
be able to use this for INDEX_op_dup2_vec with 2 constants.
Also pass along the minimal vece that may be said to apply
to the constant. This allows some simplification in the
various backends.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Having dupi pass though movi is confusing and arguably wrong.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
virtio-fs qualifies as a bootable device minimally under OVMF, but
currently the necessary "bootindex" property is missing. Add the property.
Expose the property only in the PCI device, for now. There is no boot
support for virtiofs on s390x (ccw) for the time being [1] [2], so leave
the CCW device unchanged. Add the property to the base device still,
because adding the alias to the CCW device later will be easier this way
[3].
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg01745.html
[2] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg01870.html
[3] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg01751.html
Example OpenFirmware device path for the "vhost-user-fs-pci" device in the
"bootorder" fw_cfg file:
/pci@i0cf8/pci-bridge@1,6/pci1af4,105a@0/filesystem@0
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ján Tomko <jtomko@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: virtio-fs@redhat.com
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210112131603.12686-1-lersek@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the slot is in steady powered-off state and the device is being
removed, there's no need to press the attention button. Nor is it
mandated by the Standard Hot-Plug Controller Specification, Rev. 1.0.
Moreover it confuses the guest, Linux in particular, as it assumes that
the attention button pressed in this state indicates that the device has
been inserted and will need to be powered on. Therefore it transitions
the slot into BLINKING_ON state for 5 seconds, and discovers at the end
that no device is actually inserted:
... unplug request
[12685.451329] shpchp 0000:01:00.0: Button pressed on Slot(2)
[12685.455478] shpchp 0000:01:00.0: PCI slot #2 - powering off due to button press
... in 5 seconds OS powers off the slot, QEMU ejects the device
[12690.632282] shpchp 0000:01:00.0: Latch open on Slot(2)
... excessive button press in steady powered-off state
[12690.634267] shpchp 0000:01:00.0: Button pressed on Slot(2)
[12690.636256] shpchp 0000:01:00.0: Card not present on Slot(2)
... the last button press spawns powering on the slot
[12690.638909] shpchp 0000:01:00.0: PCI slot #2 - powering on due to button press
... in 5 more seconds attempt to power on discovers empty slot
[12695.735986] shpchp 0000:01:00.0: No adapter on slot(2)
Worse, if the real device insertion happens within 5 seconds from the
apparent completion of the previous device removal (signaled via
DEVICE_DELETED event), the new button press will be interpreted as the
cancellation of that misguided powering on:
[13448.965295] shpchp 0000:01:00.0: Button pressed on Slot(2)
[13448.969430] shpchp 0000:01:00.0: PCI slot #2 - powering off due to button press
[13454.025107] shpchp 0000:01:00.0: Latch open on Slot(2)
[13454.027101] shpchp 0000:01:00.0: Button pressed on Slot(2)
[13454.029165] shpchp 0000:01:00.0: Card not present on Slot(2)
... the excessive button press spawns powering on the slot
... device has already been ejected by QEMU
[13454.031949] shpchp 0000:01:00.0: PCI slot #2 - powering on due to button press
... new device is inserted in the slot
[13456.861545] shpchp 0000:01:00.0: Latch close on Slot(2)
... valid button press arrives before 5 s since the wrong one
[13456.864894] shpchp 0000:01:00.0: Button pressed on Slot(2)
[13456.869211] shpchp 0000:01:00.0: Card present on Slot(2)
... the valid button press is counted as cancellation of the wrong one
[13456.873173] shpchp 0000:01:00.0: Button cancel on Slot(2)
[13456.877101] shpchp 0000:01:00.0: PCI slot #2 - action canceled due to button press
As a result, the newly inserted device isn't brought up by the guest.
Avoid this situation by not pushing the attention button when the device
in the slot is in powered-off state and is being ejected.
FWIW pcie implementation doesn't suffer from this problem.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20201102053750.2281818-1-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that all of the object property links to the heathrow PIC and OpenPIC have
been removed from the macio devices, it is safe to allow the macio-oldworld
and macio-neworld devices to be marked as user_creatable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201229175619.6051-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This both allows the wiring to be done as Ben suggested in his original comment in
gpio.c and also enables the OpenPIC object property link to be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201229175619.6051-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The OpenPIC device is located within the macio device on real hardware so make it
a child of the macio-newworld device. This also removes the need for setting and
checking a separate PIC object property link on the macio-newworld device which
currently causes the automated QOM introspection tests to fail.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20201229175619.6051-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
