Given that the block size is read from the header of the VDI file, a
wide variety of sizes might be seen. Rather than re-using a block
sized memory region when writing the VDI header, allocate an
appropriately sized buffer.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20210325112941.365238-3-pbonzini@redhat.com
Message-Id: <20210309144015.557477-3-david.edmondson@oracle.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a new bitmap entry is allocated, requiring the entire block to be
written, avoiding leaking the buffer allocated for the block should
the write fail.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20210325112941.365238-2-pbonzini@redhat.com
Message-Id: <20210309144015.557477-2-david.edmondson@oracle.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Setting the qcow2 data-file-raw bit means that you can ignore the
qcow2 metadata when reading from the external data file. It does not
mean that you have to ignore it, though. Therefore, the data read must
be the same regardless of whether you interpret the metadata or whether
you ignore it, and thus the L1/L2 tables must all be present and give a
1:1 mapping.
This patch changes 244's output: First, the qcow2 file is larger right
after creation, because of metadata preallocation. Second, the qemu-img
map output changes: Everything that was not explicitly discarded or
zeroed is now a data area.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210326145509.163455-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
mirror_top currently shares all permissions, and takes only the WRITE
permission (if some parent has taken that permission, too).
That is wrong, though; mirror_top is a filter, so it should take
permissions like any other filter does. For example, if the parent
needs CONSISTENT_READ, we need to take that, too, and if it cannot share
the WRITE permission, we cannot share it either.
The exception is when mirror_top is used for active commit, where we
cannot take CONSISTENT_READ (because it is deliberately unshared above
the base node) and where we must share WRITE (so that it is shared for
all images in the backing chain, so the mirror job can take it for the
target BB).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210211172242.146671-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Regular virtual timers are used to emulate timings
related to vCPU and peripheral states. QCOW2 uses timers
to clean the cache. These timers should have external
flag. In the opposite case they affect the execution
and it can't be recorded and replayed.
This patch adds external flag to the timer for qcow2
cache clean.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <161700516327.1141158.8366564693714562536.stgit@pasha-ThinkPad-X280>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Command block_passwd always fails since
Commit c01c214b69 "block: remove all encryption handling APIs"
(v2.10.0) turned block_passwd into a stub that always fails, and
hardcoded encryption_key_missing to false in query-named-block-nodes
and query-block.
Commit ad1324e044 "block: remove 'encryption_key_missing' flag from
QAPI" just landed. Complete the cleanup job: remove block_passwd.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323101951.3686029-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The vhost-user in-flight shmfd feature has not been tested with
qemu-storage-daemon's vhost-user-blk server. Disable this optional
feature for now because it requires MFD_ALLOW_SEALING, which is not
available in some CI environments.
If we need this feature in the future it can be re-enabled after
testing.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a curl transfer is finished, that does not mean that CURL lets go
of all the sockets it used for it. We therefore must not free a
CURLSocket object before CURL has invoked curl_sock_cb() to tell us to
remove it. Otherwise, we may get a use-after-free, as described in this
bug report: https://bugs.launchpad.net/qemu/+bug/1916501
(Reproducer from that report:
$ qemu-img convert -f qcow2 -O raw \
https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img \
out.img
)
(Alternatively, it might seem logical to force-drop all sockets that
have been used for a state when the respective transfer is done, kind of
like it is done now, but including unsetting the AIO handlers.
Unfortunately, doing so makes the driver just hang instead of crashing,
which seems to evidence that CURL still uses those sockets.)
Make the CURLSocket object independent of "its" CURLState by putting all
sockets into a hash table belonging to the BDRVCURLState instead of a
list that belongs to a CURLState. Do not touch any sockets in
curl_clean_state().
Testing, it seems like all sockets are indeed gone by the time the curl
BDS is closed, so it seems like there really was no point in freeing any
socket just because a transfer is done. libcurl does invoke
curl_sock_cb() with CURL_POLL_REMOVE for every socket it has.
Buglink: https://bugs.launchpad.net/qemu/+bug/1916501
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210309130541.37540-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A socket does not really belong to any specific state. We do not need
to store a pointer to "its" state in it, a pointer to the common
BDRVCURLState is sufficient.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210309130541.37540-2-mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image streaming block job restricts shared permissions of the nodes
it accesses. This can obviously fail when other users already got these
permissions. &error_abort is therefore wrong and can crash. Handle these
errors gracefully and just fail starting the block job.
Reported-by: Nini Gu <ngu@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210309173451.45152-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'host_device' and 'host_cdrom' drivers must be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The same data is available in the 'BlockDeviceInfo' struct.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The same information is available via the 'recording' and 'busy' fields.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This has been hardcoded to "false" since 2.10.0, since secrets required
to unlock block devices are now always provided up front instead of using
interactive prompts.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmBHlmIACgkQp6FrSiUn
Q2q2cQgAqJWNb4J/ShjvzocDDPzJ0iBitFbg0huFPfbt4DScubEZo5wBJG7vOhOW
hIHrWCRzGvRgsn0tcSfrgFaegmHKrLgjkibM7ou8ni9NC1kUBd3R/3FBNIMxhYf7
Q8Kfspl0LRfMJDKF9jdCnQ4Gxcd6h2OIYZqiWVg8V4Tc8WdCpIVOah7e7wjuW8bT
vgZvfboUWm5AmIF9j/MxuMn+HFZ4ArSuFVL80ZaXlD00vRra7u3HZ8pUfcOlOujg
7HeouM1E5j3NNE6aZSN++x/EQ3sg0zmirbWUCcgAyRfdRkAmB15uh2PUzPxEIJKH
UHUIW5LvNtz2+yzOAz2yK29OE523Yg==
=blE1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into staging
nbd patches for 2021-03-09
- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer
# gpg: Signature made Tue 09 Mar 2021 15:38:10 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2021-03-09:
block/qcow2: refactor qcow2_update_options_prepare error paths
block/qed: bdrv_qed_do_open: deal with errp
block/qcow2: simplify qcow2_co_invalidate_cache()
block/qcow2: read_cache_sizes: return status value
block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps
block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface
block/qcow2: qcow2_get_specific_info(): drop error propagation
blockjob: return status from block_job_set_speed()
block/mirror: drop extra error propagation in commit_active_start()
block: drop extra error propagation for bdrv_set_backing_hd
blockdev: fix drive_backup_prepare() missed error
block: check return value of bdrv_open_child and drop error propagation
utils: Deprecate hex-with-suffix sizes
utils: Improve qemu_strtosz() to have 64 bits of precision
utils: Enhance testsuite for do_strtosz()
nbd: server: Report holes for raw images
MAINTAINERS: add Vladimir as co-maintainer of NBD
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Keep setting ret close to setting errp and don't merge different error
paths into one. This way it's more obvious that we don't return
error without setting errp.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-15-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Always set errp on failure. The generic bdrv_open_driver supports
driver functions which can return a negative value but forget to set
errp. That's a strange thing. Let's improve bdrv_qed_do_open to not
behave this way. This allows the simplification of code in
bdrv_qed_co_invalidate_cache().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-14-vsementsov@virtuozzo.com>
[eblake: commit message grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
qcow2_do_open correctly sets errp on each failure path. So, we can
simplify code in qcow2_co_invalidate_cache() and drop explicit error
propagation.
Add ERRP_GUARD() as mandated by the documentation in
include/qapi/error.h so that error_prepend() is actually called even if
errp is &error_fatal.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-13-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to return status together with setting errp. It allows to
reduce error propagation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-12-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to return status together with setting errp. It makes
possible to avoid error propagation.
While being here, put ERRP_GUARD() to fix error_prepend(errp, ...)
usage inside qcow2_store_persistent_dirty_bitmaps() (see the comment
above ERRP_GUARD() definition in include/qapi/error.h)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-11-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's recommended for bool functions with errp to return true on success
and false on failure. Non-standard interfaces don't help to understand
the code. The change is also needed to reduce error propagation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Don't use error propagation in qcow2_get_specific_info(). For this
refactor qcow2_get_bitmap_info_list, its current interface is rather
weird.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210202124956.63146-9-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
[eblake: separate local 'tail' variable from 'info_list' parameter]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's check return value of mirror_start_job to check for failure
instead of local_err.
Rename ret to job, as ret is usually integer variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch is generated by cocci script:
@@
symbol bdrv_open_child, errp, local_err;
expression file;
@@
file = bdrv_open_child(...,
- &local_err
+ errp
);
- if (local_err)
+ if (!file)
{
...
- error_propagate(errp, local_err);
...
}
with command
spatch --sp-file x.cocci --macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80 --use-gitgrep block
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-4-vsementsov@virtuozzo.com>
[eblake: fix qcow2_do_open() to use ERRP_GUARD, necessary as the only
caller to pass allow_none=true]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210224104707.88430-5-vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to use it in more places, calculating
"s->tracks << BDRV_SECTOR_BITS" doesn't look good.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210224104707.88430-4-vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename bytes_covered_by_bitmap_cluster() to
bdrv_dirty_bitmap_serialization_coverage() and make it public.
It is needed as we are going to share it with bitmap loading in
parallels format.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20210224104707.88430-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check that the sector number and byte count are valid.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-13-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Validate discard/write zeroes the same way we do for virtio-blk. Some of
these checks are mandated by the VIRTIO specification, others are
internal to QEMU.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-11-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The driver is supposed to honor the blk_size field but the protocol
still uses 512-byte sector numbers. It is incorrect to multiply
req->sector_num by blk_size.
VIRTIO 1.1 5.2.5 Device Initialization says:
blk_size can be read to determine the optimal sector size for the
driver to use. This does not affect the units used in the protocol
(always 512 bytes), but awareness of the correct value can affect
performance.
Fixes: 3578389bcf ("block/export: vhost-user block device backend server")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-10-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use VIRTIO_BLK_SECTOR_BITS and VIRTIO_BLK_SECTOR_SIZE when dealing with
virtio-blk sector numbers. Although the values happen to be the same as
BDRV_SECTOR_BITS and BDRV_SECTOR_SIZE, they are conceptually different.
This makes it clearer when we are dealing with virtio-blk sector units.
Use VIRTIO_BLK_SECTOR_BITS in vu_blk_initialize_config(). Later patches
will use it the new constants the virtqueue request processing code
path.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-9-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The config->blk_size field is little-endian. Use the native-endian
blk_size variable to avoid double byteswapping.
Fixes: 11f60f7eae ("block/export: make vhost-user-blk config space little-endian")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-8-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the backup-top node transitions from active to inactive in
bdrv_backup_top_drop(), the BlockCopyState is freed and the filtered
child is removed, so the node effectively becomes unusable.
However, noone told its I/O functions this, so they will happily
continue accessing bs->backing and s->bcs. Prevent that by aborting
early when s->active is false.
(After the preceding patch, the node should be gone after
bdrv_backup_top_drop(), so this should largely be a theoretical problem.
But still, better to be safe than sorry, and also I think it just makes
sense to check s->active in the I/O functions.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210219153348.41861-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block job holds a reference to the backup-top node (because it is
passed as the main job BDS to block_job_create()). Therefore,
bdrv_backup_top_drop() cannot delete the backup-top node (replacing it
by its child does not affect the job parent, because that has
.stay_at_node set). That is a problem, because all of its I/O functions
assume the BlockCopyState (s->bcs) to be valid and that it has a
filtered child; but after bdrv_backup_top_drop(), neither of those
things are true.
It does not make sense to add new parents to backup-top after
backup_clean(), so we should detach it from the job before
bdrv_backup_top_drop(). Because there is no function to do that for a
single node, just detach all of the job's nodes -- the job does not do
anything past backup_clean() anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210219153348.41861-2-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This enables some simplification of vl.c via error_fatal, and improves
error messages. Before:
$ ./qemu-system-x86_64 -readconfig .
qemu-system-x86_64: error reading file
qemu-system-x86_64: -readconfig .: read config .: Invalid argument
$ /usr/libexec/qemu-kvm -readconfig foo
qemu-kvm: -readconfig foo: read config foo: No such file or directory
After:
$ ./qemu-system-x86_64 -readconfig .
qemu-system-x86_64: -readconfig .: Cannot read config file: Is a directory
$ ./qemu-system-x86_64 -readconfig foo
qemu-system-x86_64: -readconfig foo: Could not open 'foo': No such file or directory
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210226170816.231173-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the qcow initialization fails, we should remove the file if it was
already created, to avoid leaving stale files around.
We already do this for luks raw images.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201217170904.946013-4-mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function wraps bdrv_co_delete_file for the common case of removing a file,
which was just created by format driver, on an error condition.
It hides the -ENOTSUPP error, and reports all other errors otherwise.
Use it in luks driver
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201217170904.946013-3-mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the underlying block device doesn't support the
bdrv_co_delete_file interface, an 'Error' object was leaked.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201217170904.946013-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- add 'transform' member to manipulate bitmaps across migration
- work towards better error handling during bdrv_open
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmAnDQsACgkQp6FrSiUn
Q2qc5Qf/SKVdpX4j7OnHF6sBuf/8LVWz4KazSqEU0ohazBJmafgJpH2EA5pXMXR4
frZDWeanGmhj1MjMkta/++uvEBU/TMpW2z98mZvjErteXdnRQAlII/hOCI+QZJvg
viQ5t1EyrkyXzUePOjs+AwqA5KHWbCKt6QqyItQ78HvI23sw/fuvHj0G67KbVzXZ
VcSrVr0J7PXnZV/hWfg+C+Nn9Ro9tsVdn79awLYVQ7/SDro3hzylpcHMQaHMK2oe
mX4D2kNq7s21E27Zb6vlknUhQPkMdETk0gfEbpn7sTVMEc58GRLC7Tqfx7l0JIFK
5izVyA5vndKVxDGYPkbDK6VL2uDg4A==
=+Epy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2021-02-12' into staging
bitmaps patches for 2021-02-12
- add 'transform' member to manipulate bitmaps across migration
- work towards better error handling during bdrv_open
# gpg: Signature made Fri 12 Feb 2021 23:19:39 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-bitmaps-2021-02-12:
block: use return status of bdrv_append()
block: return status from bdrv_append and friends
qemu-iotests: 300: Add test case for modifying persistence of bitmap
migration: dirty-bitmap: Allow control of bitmap persistence
migration: dirty-bitmap: Use struct for alias map inner members
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now bdrv_append returns status and we can drop all the local_err things
around it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Cancel in-flight io on target to not waste the time.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Cancel in-flight io on target to not waste the time.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to cancel in-flight requests on mirror nbd target on job
cancel. Still nbd is often used not directly but as raw-format child.
So, add pass-through handler here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Just stop waiting for connection in existing requests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It will be used to stop retrying NBD requests on mirror cancel.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently bdrv_all_find_snapshot() will return 0 if it finds
a snapshot, -1 if an error occurs, or if it fails to find a
snapshot. New callers to be added want to distinguish between
the error scenario and failing to find a snapshot.
Rename it to bdrv_all_has_snapshot and make it return -1 on
error, 0 if no snapshot is found and 1 if snapshot is found.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the vmstate will be stored in the first block device that
supports snapshots. Historically this would have usually been the
root device, but with UEFI it might be the variable store. There
needs to be a way to override the choice of block device to store
the state in.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable default
behaviour, there are scenarios that are not well handled by the default
logic. Some of the conditions do not have a single correct answer.
Thus there needs to be a way for the mgmt app to provide an explicit
list of blockdevs to perform snapshots across. This can be achieved
by passing a list of node names that should be used.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
error message. In some cases multiple callers are reporting the
same error message, but with slightly different text. In the future
there will be more error scenarios for some of these methods, which
will benefit from fine grained error message reporting. So it is
helpful to push error reporting down a level.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Initialize variables]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When an NBD block driver state is moved from one aio_context to another
(e.g. when doing a drain in a migration thread),
nbd_client_attach_aio_context_bh is executed that enters the connection
coroutine.
However, the assumption that ->connection_co is always present here
appears incorrect: the connection may have encountered an error other
than -EIO in the underlying transport, and thus may have decided to quit
rather than keep trying to reconnect, and therefore it may have
terminated the connection coroutine. As a result an attempt to reassign
the client in this state (NBD_CLIENT_QUIT) to a different aio_context
leads to a null pointer dereference:
#0 qio_channel_detach_aio_context (ioc=0x0)
at /build/qemu-gYtjVn/qemu-5.0.1/io/channel.c:452
#1 0x0000562a242824b3 in bdrv_detach_aio_context (bs=0x562a268d6a00)
at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6151
#2 bdrv_set_aio_context_ignore (bs=bs@entry=0x562a268d6a00,
new_context=new_context@entry=0x562a260c9580,
ignore=ignore@entry=0x7feeadc9b780)
at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6230
#3 0x0000562a24282969 in bdrv_child_try_set_aio_context
(bs=bs@entry=0x562a268d6a00, ctx=0x562a260c9580,
ignore_child=<optimized out>, errp=<optimized out>)
at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6332
#4 0x0000562a242bb7db in blk_do_set_aio_context (blk=0x562a2735d0d0,
new_context=0x562a260c9580,
update_root_node=update_root_node@entry=true, errp=errp@entry=0x0)
at /build/qemu-gYtjVn/qemu-5.0.1/block/block-backend.c:1989
#5 0x0000562a242be0bd in blk_set_aio_context (blk=<optimized out>,
new_context=<optimized out>, errp=errp@entry=0x0)
at /build/qemu-gYtjVn/qemu-5.0.1/block/block-backend.c:2010
#6 0x0000562a23fbd953 in virtio_blk_data_plane_stop (vdev=<optimized
out>)
at /build/qemu-gYtjVn/qemu-5.0.1/hw/block/dataplane/virtio-blk.c:292
#7 0x0000562a241fc7bf in virtio_bus_stop_ioeventfd (bus=0x562a260dbf08)
at /build/qemu-gYtjVn/qemu-5.0.1/hw/virtio/virtio-bus.c:245
#8 0x0000562a23fefb2e in virtio_vmstate_change (opaque=0x562a260dbf90,
running=0, state=<optimized out>)
at /build/qemu-gYtjVn/qemu-5.0.1/hw/virtio/virtio.c:3220
#9 0x0000562a2402ebfd in vm_state_notify (running=running@entry=0,
state=state@entry=RUN_STATE_FINISH_MIGRATE)
at /build/qemu-gYtjVn/qemu-5.0.1/softmmu/vl.c:1275
#10 0x0000562a23f7bc02 in do_vm_stop (state=RUN_STATE_FINISH_MIGRATE,
send_stop=<optimized out>)
at /build/qemu-gYtjVn/qemu-5.0.1/cpus.c:1032
#11 0x0000562a24209765 in migration_completion (s=0x562a260e83a0)
at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:2914
#12 migration_iteration_run (s=0x562a260e83a0)
at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:3275
#13 migration_thread (opaque=opaque@entry=0x562a260e83a0)
at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:3439
#14 0x0000562a2435ca96 in qemu_thread_start (args=<optimized out>)
at /build/qemu-gYtjVn/qemu-5.0.1/util/qemu-thread-posix.c:519
#15 0x00007feed31466ba in start_thread (arg=0x7feeadc9c700)
at pthread_create.c:333
#16 0x00007feed2e7c41d in __GI___sysctl (name=0x0, nlen=608471908,
oldval=0x562a2452b138, oldlenp=0x0, newval=0x562a2452c5e0
<__func__.28102>, newlen=0)
at ../sysdeps/unix/sysv/linux/sysctl.c:30
#17 0x0000000000000000 in ?? ()
Fix it by checking that the connection coroutine is non-null before
trying to enter it. If it is null, no entering is needed, as the
connection is probably going down anyway.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129073859.683063-3-rvkagan@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
When the reconnect in NBD client is in progress, the iochannel used for
NBD connection doesn't exist. Therefore an attempt to detach it from
the aio_context of the parent BlockDriverState results in a NULL pointer
dereference.
The problem is triggerable, in particular, when an outgoing migration is
about to finish, and stopping the dataplane tries to move the
BlockDriverState from the iothread aio_context to the main loop. If the
NBD connection is lost before this point, and the NBD client has entered
the reconnect procedure, QEMU crashes:
#0 qemu_aio_coroutine_enter (ctx=0x5618056c7580, co=0x0)
at /build/qemu-6MF7tq/qemu-5.0.1/util/qemu-coroutine.c:109
#1 0x00005618034b1b68 in nbd_client_attach_aio_context_bh (
opaque=0x561805ed4c00) at /build/qemu-6MF7tq/qemu-5.0.1/block/nbd.c:164
#2 0x000056180353116b in aio_wait_bh (opaque=0x7f60e1e63700)
at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-wait.c:55
#3 0x0000561803530633 in aio_bh_call (bh=0x7f60d40a7e80)
at /build/qemu-6MF7tq/qemu-5.0.1/util/async.c:136
#4 aio_bh_poll (ctx=ctx@entry=0x5618056c7580)
at /build/qemu-6MF7tq/qemu-5.0.1/util/async.c:164
#5 0x0000561803533e5a in aio_poll (ctx=ctx@entry=0x5618056c7580,
blocking=blocking@entry=true)
at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-posix.c:650
#6 0x000056180353128d in aio_wait_bh_oneshot (ctx=0x5618056c7580,
cb=<optimized out>, opaque=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-wait.c:71
#7 0x000056180345c50a in bdrv_attach_aio_context (new_context=0x5618056c7580,
bs=0x561805ed4c00) at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6172
#8 bdrv_set_aio_context_ignore (bs=bs@entry=0x561805ed4c00,
new_context=new_context@entry=0x5618056c7580,
ignore=ignore@entry=0x7f60e1e63780)
at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6237
#9 0x000056180345c969 in bdrv_child_try_set_aio_context (
bs=bs@entry=0x561805ed4c00, ctx=0x5618056c7580,
ignore_child=<optimized out>, errp=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6332
#10 0x00005618034957db in blk_do_set_aio_context (blk=0x56180695b3f0,
new_context=0x5618056c7580, update_root_node=update_root_node@entry=true,
errp=errp@entry=0x0)
at /build/qemu-6MF7tq/qemu-5.0.1/block/block-backend.c:1989
#11 0x00005618034980bd in blk_set_aio_context (blk=<optimized out>,
new_context=<optimized out>, errp=errp@entry=0x0)
at /build/qemu-6MF7tq/qemu-5.0.1/block/block-backend.c:2010
#12 0x0000561803197953 in virtio_blk_data_plane_stop (vdev=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/hw/block/dataplane/virtio-blk.c:292
#13 0x00005618033d67bf in virtio_bus_stop_ioeventfd (bus=0x5618056d9f08)
at /build/qemu-6MF7tq/qemu-5.0.1/hw/virtio/virtio-bus.c:245
#14 0x00005618031c9b2e in virtio_vmstate_change (opaque=0x5618056d9f90,
running=0, state=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/hw/virtio/virtio.c:3220
#15 0x0000561803208bfd in vm_state_notify (running=running@entry=0,
state=state@entry=RUN_STATE_FINISH_MIGRATE)
at /build/qemu-6MF7tq/qemu-5.0.1/softmmu/vl.c:1275
#16 0x0000561803155c02 in do_vm_stop (state=RUN_STATE_FINISH_MIGRATE,
send_stop=<optimized out>) at /build/qemu-6MF7tq/qemu-5.0.1/cpus.c:1032
#17 0x00005618033e3765 in migration_completion (s=0x5618056e6960)
at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:2914
#18 migration_iteration_run (s=0x5618056e6960)
at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:3275
#19 migration_thread (opaque=opaque@entry=0x5618056e6960)
at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:3439
#20 0x0000561803536ad6 in qemu_thread_start (args=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/util/qemu-thread-posix.c:519
#21 0x00007f61085d06ba in start_thread ()
from /lib/x86_64-linux-gnu/libpthread.so.0
#22 0x00007f610830641d in sysctl () from /lib/x86_64-linux-gnu/libc.so.6
#23 0x0000000000000000 in ?? ()
Fix it by checking that the iochannel is non-null before trying to
detach it from the aio_context. If it is null, no detaching is needed,
and it will get reattached in the proper aio_context once the connection
is reestablished.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129073859.683063-2-rvkagan@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert now copy_range parameters which are already 64bit to signed
type.
It's safe as we don't work with requests overflowing BDRV_MAX_LENGTH
(which is less than INT64_MAX), and do check the requests in
bdrv_co_copy_range_internal() (by bdrv_check_request32(), which calls
bdrv_check_request()).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-17-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
Now, since bdrv_co_preadv_part() and bdrv_co_pwritev_part() have been
updated, update all their wrappers.
For all of them type of 'bytes' is widening, so callers are safe. We
have update request_fn in blkverify.c simultaneously. Still it's just a
pointer to one of bdrv_co_pwritev() or bdrv_co_preadv(), and type is
widening for callers of the request_fn anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-16-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_preadv_part() and bdrv_co_pwritev_part() and their
remaining dependencies now.
bdrv_pad_request() is updated simultaneously, as pointer to bytes passed
to it both from bdrv_co_pwritev_part() and bdrv_co_preadv_part().
So, all callers of bdrv_pad_request() are updated to pass 64bit bytes.
bdrv_pad_request() is already good for 64bit requests, add
corresponding assertion.
Look at bdrv_co_preadv_part() and bdrv_co_pwritev_part().
Type is widening, so callers are safe. Let's look inside the functions.
In bdrv_co_preadv_part() and bdrv_aligned_pwritev() we only pass bytes
to other already int64_t interfaces (and some obviously safe
calculations), it's OK.
In bdrv_co_do_zero_pwritev() aligned_bytes may become large now, still
it's passed to bdrv_aligned_pwritev which supports int64_t bytes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-15-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_aligned_preadv() now.
Make the bytes variable in bdrv_padding_rmw_read() int64_t, as it is
only used for pass-through to bdrv_aligned_preadv().
All bdrv_aligned_preadv() callers are safe as type is widening. Let's
look inside:
- add a new-style assertion that request is good.
- callees bdrv_is_allocated(), bdrv_co_do_copy_on_readv() supports
int64_t bytes
- conversion of bytes_remaining is OK, as we never have requests
overflowing BDRV_MAX_LENGTH
- looping through bytes_remaining is ok, num is updated to int64_t
- for bdrv_driver_preadv we have same limit of max_transfer
- qemu_iovec_memset is OK, as bytes+qiov_offset should not overflow
qiov->size anyway (thanks to bdrv_check_qiov_request())
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-14-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_do_copy_on_readv() now.
'bytes' type widening, so callers are safe. Look at the function
itself:
bytes, skip_bytes and progress become int64_t.
bdrv_round_to_clusters() is OK, cluster_bytes now may be large.
trace_bdrv_co_do_copy_on_readv() is OK
looping through cluster_bytes is still OK.
pnum is still capped to max_transfer, and to MAX_BOUNCE_BUFFER when we
are going to do COR operation. Therefor calculations in
qemu_iovec_from_buf() and bdrv_driver_preadv() should not change.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-13-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_aligned_pwritev() now and convert the dependencies:
bdrv_co_write_req_prepare() and bdrv_co_write_req_finish() to signed
type bytes.
Conversion of bdrv_co_write_req_prepare() and
bdrv_co_write_req_finish() is definitely safe, as all requests in
block/io must not overflow BDRV_MAX_LENGTH. Still add assertions.
For bdrv_aligned_pwritev() 'bytes' type is widened, so callers are
safe. Let's check usage of the parameter inside the function.
Passing to bdrv_co_write_req_prepare() and bdrv_co_write_req_finish()
is OK.
Passing to qemu_iovec_* is OK after new assertion. All other callees
are already updated to int64_t.
Checking alignment is not changed, offset + bytes and qiov_offset +
bytes calculations are safe (thanks to new assertions).
max_transfer is kept to be int for now. It has a default of INT_MAX
here, and some drivers may rely on it. It's to be refactored later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-12-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_do_pwrite_zeroes() now.
Callers are safe, as converting int to int64_t is safe. Concentrate on
'bytes' usage in the function (thx to Eric Blake):
compute 'int tail' via % 'int alignment' - safe
fragmentation loop 'int num' - still fragments with a cap on
max_transfer
use of 'num' within the loop
MIN(bytes, max_transfer) as well as %alignment - still works, so
calculations in if (head) {} are safe
clamp size by 'int max_write_zeroes' - safe
drv->bdrv_co_pwrite_zeroes(int) - safe because of clamping
clamp size by 'int max_transfer' - safe
buf allocation is still clamped to max_transfer
qemu_iovec_init_buf(size_t) - safe because of clamping
bdrv_driver_pwritev(uint64_t) - safe
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver wrappers parameters which are already 64bit to
signed type.
Requests in block/io.c must never exceed BDRV_MAX_LENGTH (which is less
than INT64_MAX), which makes the conversion to signed 64bit type safe.
Add corresponding assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-10-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
All requests in block/io must not overflow BDRV_MAX_LENGTH, all
external users of BdrvTrackedRequest already have corresponding
assertions, so we are safe. Add some assertions still.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-9-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Operations with qiov add more restrictions on bytes, let's cover it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The function is called from 64bit io handlers, and bytes is just passed
to throttle_account() which is 64bit too (unsigned though). So, let's
convert intermediate argument to 64bit too.
This patch is a first in the 64-bit-blocklayer series, so we are
generally moving to int64_t for both offset and bytes parameters on all
io paths. Main motivation is realization of 64-bit write_zeroes
operation for fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
Patch-correctness audit by Eric Blake:
Caller has 32-bit, this patch now causes widening which is safe:
block/block-backend.c: blk_do_preadv() passes 'unsigned int'
block/block-backend.c: blk_do_pwritev_part() passes 'unsigned int'
block/throttle.c: throttle_co_pwrite_zeroes() passes 'int'
block/throttle.c: throttle_co_pdiscard() passes 'int'
Caller has 64-bit, this patch fixes potential bug where pre-patch
could narrow, except it's easy enough to trace that callers are still
capped at 2G actions:
block/throttle.c: throttle_co_preadv() passes 'uint64_t'
block/throttle.c: throttle_co_pwritev() passes 'uint64_t'
Implementation in question: block/throttle-groups.c
throttle_group_co_io_limits_intercept() takes 'unsigned int bytes'
and uses it: argument to util/throttle.c throttle_account(uint64_t)
All safe: it patches a latent bug, and does not introduce any 64-bit
gotchas once throttle_co_p{read,write}v are relaxed, and assuming
throttle_account() is not buggy.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201211183934.169161-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Make bdrv_pad_request() honest: return error if
qemu_iovec_init_extended() failed.
Update also bdrv_padding_destroy() to clean the structure for safety.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Prepare for the following patch when bdrv_pad_request() will be able to
fail. Update the comments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Calculation of sum may theoretically overflow, so use 64bit type and
add some good assertions.
Use int64_t constantly.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak assertion order]
Signed-off-by: Eric Blake <eblake@redhat.com>
Actually, we can't extend the io vector in all cases. Handle possible
MAX_IOV and size_t overflows.
For now add assertion to callers (actually they rely on success anyway)
and fix them in the following patch.
Add also some additional good assertions to qemu_iovec_init_slice()
while being here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix iotest 206 fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>
size_to_str() can return a size like "4.24 MiB", with a single digit
integer part and two fractional digits. This is eight characters, but
commit b39847a5 changed the format string to only reserve seven
characters for the column.
This can result in unaligned columns, which in turn changes the output of
iotests case 267 because exceeding the column size defeats the attempt
to filter the size out of the output (observed with the ppc64 emulator).
The resulting change is only a whitespace change, but since commit
f203080b this is enough for iotests to consider the test failed.
Taking a character away from the tag name column and adding it to the VM
size column doesn't change anything in the common case (the tag name is
left justified, the VM size is right justified), but fixes this case.
Fixes: b39847a505
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210202155911.179865-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
NVMe controllers implement different versions of the spec,
and different features of it. It is useful to gather this
information when debugging.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210127212137.3482291-3-philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 15b2260bef ("block/nvme: Trace controller capabilities")
misunderstood the doorbell stride value from the datasheet, use
the correct one. The 'doorbell_scale' variable used few lines
later is correct.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210127212137.3482291-2-philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently, blk_is_read_only() tells whether a given BlockBackend can
only be used in read-only mode because its root node is read-only. Some
callers actually try to answer a slightly different question: Is the
BlockBackend configured to be writable, by taking write permissions on
the root node?
This can differ, for example, for CD-ROM devices which don't take write
permissions, but may be backed by a writable image file. scsi-cd allows
write requests to the drive if blk_is_read_only() returns false.
However, the write request will immediately run into an assertion
failure because the write permission is missing.
This patch introduces separate functions for both questions.
blk_supports_write_perm() answers the question whether the block
node/image file can support writable devices, whereas blk_is_writable()
tells whether the BlockBackend is currently configured to be writable.
All calls of blk_is_read_only() are converted to one of the two new
functions.
Fixes: https://bugs.launchpad.net/bugs/1906693
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a call to fcntl(2) for the purpose of adding file locks fails
with an error other than EAGAIN or EACCES, report the error returned
by fcntl.
EAGAIN or EACCES are elided as they are considered to be common
failures, indicating that a conflicting lock is held by another
process.
No errors are elided when removing file locks.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210113164447.2545785-1-david.edmondson@oracle.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-21-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Drop unused code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-20-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This brings async request handling and block-status driven chunk sizes
to backup out of the box, which improves backup performance.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-18-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-17-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to stop use of this callback in the following commit.
Still the callback handling code will be dropped in a separate commit.
So, for now let's make it optional.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-16-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add new parameters to configure future backup features. The patch
doesn't introduce aio backup requests (so we actually have only one
worker) neither requests larger than one cluster. Still, formally we
satisfy these maximums anyway, so add the parameters now, to facilitate
further patch which will really change backup job behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-11-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add function to cancel running async block-copy call. It will be used
in backup.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to directly use one async block-copy operation for backup
job, so we need rate limiter.
We want to maintain current backup behavior: only background copying is
limited and copy-before-write operations only participate in limit
calculation. Therefore we need one rate limiter for block-copy state
and boolean flag for block-copy call state for actual limitation.
Note, that we can't just calculate each chunk in limiter after
successful copying: it will not save us from starting a lot of async
sub-requests which will exceed limit too much. Instead let's use the
following scheme on sub-request creation:
1. If at the moment limit is not exceeded, create the request and
account it immediately.
2. If at the moment limit is already exceeded, drop create sub-request
and handle limit instead (by sleep).
With this approach we'll never exceed the limit more than by one
sub-request (which pretty much matches current backup behavior).
Note also, that if there is in-flight block-copy async call,
block_copy_kick() should be used after set-speed to apply new setup
faster. For that block_copy_kick() published in this patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It simplifies debugging.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
They will be used for backup.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-5-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We'll need async block-copy invocation to use in backup directly.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Refactor common path to use BlockCopyCallState pointer as parameter, to
prepare it for use in asynchronous block-copy (at least, we'll need to
run block-copy in a coroutine, passing the whole parameters as one
pointer).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Experiments show, that copy_range is not always making things faster.
So, to make experimentation simpler, let's add a parameter. Some more
perf parameters will be added soon, so here is a new struct.
For now, add new backup qmp parameter with x- prefix for the following
reasons:
- We are going to add more performance parameters, some will be
related to the whole block-copy process, some only to background
copying in backup (ignored for copy-before-write operations).
- On the other hand, we are going to use block-copy interface in other
block jobs, which will need performance options as well.. And it
should be the same structure or at least somehow related.
So, there are too much unclean things about how the interface and now
we need the new options mostly for testing. Let's keep them
experimental for a while.
In do_backup_common() new x-perf parameter handled in a way to
make further options addition simpler.
We add use-copy-range with default=true, and we'll change the default
in further patch, after moving backup to use block-copy.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-2-vsementsov@virtuozzo.com>
[mreitz: s/5\.2/6.0/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch completes the series with the COR-filter applied to
block-stream operations.
Adding the filter makes it possible in future implement discarding
copied regions in backing files during the block-stream job, to reduce
the disk overuse (we need control on permissions).
Also, the filter now is smart enough to do copy-on-read with specified
base, so we have benefit on guest reads even when doing block-stream of
the part of the backing chain.
Several iotests are slightly modified due to filter insertion.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216061703.70908-14-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a direct link to target bs for convenience and to simplify
following commit which will insert COR filter above target bs.
This is a part of original commit written by Andrey.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-13-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The code already don't freeze base node and we try to make it prepared
for the situation when base node is changed during the operation. In
other words, block-stream doesn't own base node.
Let's introduce a new interface which should replace the current one,
which will in better relations with the code. Specifying bottom node
instead of base, and requiring it to be non-filter gives us the
following benefits:
- drop difference between above_base and base_overlay, which will be
renamed to just bottom, when old interface dropped
- clean way to work with parallel streams/commits on the same backing
chain, which otherwise become a problem when we introduce a filter
for stream job
- cleaner interface. Nobody will surprised the fact that base node may
disappear during block-stream, when there is no word about "base" in
the interface.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216061703.70908-11-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Stream in stream_prepare calls bdrv_change_backing_file() to change
backing-file in the metadata of bs.
It may use either backing-file parameter given by user or just take
filename of base on job start.
Backing file format is determined by base on job finish.
There are some problems with this design, we solve only two by this
patch:
1. Consider scenario with backing-file unset. Current concept of stream
supports changing of the base during the job (we don't freeze link to
the base). So, we should not save base filename at job start,
- let's determine name of the base on job finish.
2. Using direct base to determine filename and format is not very good:
base node may be a filter, so its filename may be JSON, and format_name
is not good for storing into qcow2 metadata as backing file format.
- let's use unfiltered_base
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: change commit subject, change logic in stream_prepare]
Message-Id: <20201216061703.70908-10-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the flag BDRV_REQ_PREFETCH was set, skip idling read/write
operations in COR-driver. It can be taken into account for the
COR-algorithms optimization. That check is being made during the
block stream job by the moment.
Add the BDRV_REQ_PREFETCH flag to the supported_read_flags of the
COR-filter.
block: Modify the comment for the flag BDRV_REQ_PREFETCH as we are
going to use it alone and pass it to the COR-filter driver for further
processing.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-9-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add the new member supported_read_flags to the BlockDriverState
structure. It will control the flags set for copy-on-read operations.
Make the block generic layer evaluate supported read flags before they
go to a block driver.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: use assert instead of abort]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an option to limit copy-on-read operations to specified sub-chain
of backing-chain, to make copy-on-read filter useful for block-stream
job.
Suggested-by: Max Reitz <mreitz@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: change subject, modified to freeze the chain,
do some fixes]
Message-Id: <20201216061703.70908-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Provide the possibility to pass the 'filter-node-name' parameter to the
block-stream job as it is done for the commit block job.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: comment indentation, s/Since: 5.2/Since: 6.0/]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-5-vsementsov@virtuozzo.com>
[mreitz: s/commit/stream/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Provide API for the COR-filter removal. Also, drop the filter child
permissions for an inactive state when the filter node is being
removed.
To insert the filter, the block generic layer function
bdrv_insert_node() can be used.
The new function bdrv_cor_filter_drop() may be considered as an
intermediate solution before the QEMU permission update system has
overhauled. Then we are able to implement the API function
bdrv_remove_node() on the block generic layer.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for the recently introduced functions
bdrv_co_preadv_part()
and
bdrv_co_pwritev_part()
to the COR-filter driver.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216061703.70908-2-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Register a yank function which shuts down the socket and sets
s->state = NBD_CLIENT_QUIT. This is the same behaviour as if an
error occured.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <b73eb07db6d1fcd00667beb13ae6117260f002c3.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
crypto/tlscreds.h includes GnuTLS headers if CONFIG_GNUTLS is set, but
GNUTLS_CFLAGS, that describe include path, are not propagated
transitively to all users of crypto and build fails if GnuTLS headers
reside in non-standard directory (which is a case for homebrew on Apple
Silicon).
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20210102125213.41279-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
cURL 7.16.0 was released in October 2006. Just remove code that is
in all likelihood not being used anywhere, and require the oldest version
found in currently supported distros, which is 7.29.0 from CentOS 7.
pkg-config is enough for QEMU, since it does not need extra information
such as the path for certicate authorities. All supported platforms
today will all have pkg-config for curl, so we can drop curl-config.
Suggested-by: Daniel Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows converting the dependencies to meson options one by one.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- New block filter: preallocate (which, on writes beyond an image file's
end, allocates big chunks of data so that such post-EOF writes will
occur less frequently)
- write-zeroes and block-status support for Quorum
- Implementation of truncate for the nvme block driver similarly to the
existing implementations for host block devices and iscsi devices
- Block layer refactoring: Drop the tighten_restrictions concept in the
block permission functions
- iotest fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl/cwIoSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AnvMH+gOnZCwEUKWuBxGX3Wjb/kqV1OuhAhcP
IVrKLRnqdarCYMQ9M4SZL6pedfsujHA7vClTV7NTrenXBsEIradBQ59ztQ0oDirS
4ipIjVtNqj7m86l+IRZDq5HlwOYwwFnWogmLo2bcmNJGLpPQQfrhL2vRJ1wLgFYk
WjeAVlkkYcHnTIDvs4ne9WRSlxGVBWJ4X5nSlRdZqeyUcMY9v4wL4P9Wc4ZuORmq
/5HRcT5JKGaT2bAueaqAGEdtPFGbazEP5uU7MTTK/fueDKIRAXO2d0gqhANtOOJQ
7hMmKhwOPOOhrrpCVi9nxsVwdCOHfurV0km6cOs+Iprm/Wm2UtuS/A8=
=z+7k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-12-18' into staging
Block patches:
- New block filter: preallocate (which, on writes beyond an image file's
end, allocates big chunks of data so that such post-EOF writes will
occur less frequently)
- write-zeroes and block-status support for Quorum
- Implementation of truncate for the nvme block driver similarly to the
existing implementations for host block devices and iscsi devices
- Block layer refactoring: Drop the tighten_restrictions concept in the
block permission functions
- iotest fixes
# gpg: Signature made Fri 18 Dec 2020 14:45:30 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-12-18: (30 commits)
iotests: Fix _send_qemu_cmd with bash 5.1
iotests/102: Pass $QEMU_HANDLE to _send_qemu_cmd
block/nvme: Implement fake truncate() coroutine
quorum: Implement bdrv_co_pwrite_zeroes()
quorum: Implement bdrv_co_block_status()
scripts/simplebench: add bench_prealloc.py
simplebench/results_to_text: make executable
simplebench/results_to_text: add difference line to the table
simplebench/results_to_text: improve view of the table
simplebench: move results_to_text() into separate file
simplebench: rename ascii() to results_to_text()
scripts/simplebench: use standard deviation for +- error
scripts/simplebench: support iops
scripts/simplebench: fix grammar: s/successed/succeeded/
iotests: add 298 to test new preallocate filter driver
iotests.py: execute_setup_common(): add required_fmts argument
iotests: qemu_io_silent: support --image-opts
qemu-io: add preallocate mode parameter for truncate command
block: introduce preallocate filter
block: bdrv_check_perm(): process children anyway
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-10-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-9-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pad VHDFooter as specified in the "Virtual Hard Disk Image Format
Specification" version 1.0[*]. Change footer buffers from
uint8_t[HEADER_SIZE] to VHDFooter. Their size remains the same.
The VHDFooter * variables pointing to a VHDFooter variable right next
to it are now silly. Eliminate them, and shorten the remaining
variables' names.
Most variables pointing to s->footer are now also silly. Eliminate
them, too.
[*] http://download.microsoft.com/download/f/f/e/ffef50a5-07dd-4cf8-aaa3-442c0673a029/Virtual%20Hard%20Disk%20Format%20Spec_10_18_06.doc
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-8-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-7-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pad VHDDynDiskHeader as specified in the "Virtual Hard Disk Image
Format Specification" version 1.0[*]. Change dynamic disk header
buffers from uint8_t[1024] to VHDDynDiskHeader. Their size remains
the same.
The VHDDynDiskHeader * variables pointing to a VHDDynDiskHeader
variable right next to it are now silly. Eliminate them.
[*] http://download.microsoft.com/download/f/f/e/ffef50a5-07dd-4cf8-aaa3-442c0673a029/Virtual%20Hard%20Disk%20Format%20Spec_10_18_06.doc
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-6-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some of the next commits will checksum structs. Change vpc_checksum()
to take void * instead of uint8_t, to save us pointless casts to
uint8_t *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-5-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
create_dynamic_disk() takes a buffer holding the footer as first
argument. It writes out the footer (512 bytes), then reuses the
buffer to initialize and write out the dynamic header (1024 bytes).
Works, because the caller passes a buffer that is large enough for
both purposes. I hate that.
Use a separate buffer for the dynamic header, and adjust the caller's
buffer.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-4-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
create_dynamic_disk() takes a buffer holding the footer as first
argument. It writes out the footer (512 bytes), then reuses the
buffer to initialize and write out the dynamic header (1024 bytes),
then reuses it again to initialize and write out BAT sectors (512).
Works, because the caller passes a buffer that is large enough for all
three purposes. I hate that.
Use a separate buffer for writing out BAT sectors. The next commit
will do the same for the dynamic header.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-3-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The dynamic header's size is 1024 bytes.
vpc_open() reads only the 512 bytes of the dynamic header into buf[].
Works, because it doesn't actually access the second half. However, a
colleague told me that GCC 11 warns:
../block/vpc.c:358:51: error: array subscript 'struct VHDDynDiskHeader[0]' is partly outside array bounds of 'uint8_t[512]' [-Werror=array-bounds]
Clean up to read the full header.
Rename buf[] to dyndisk_header_buf[] while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217162003.1102738-2-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
NVMe drive cannot be shrunk.
Since commit c80d8b06cf we can use the @exact parameter (set
to false) to return success if the block device is larger than
the requested offset (even if we can not be shrunk).
Use this parameter to implement the NVMe truncate() coroutine,
similarly how it is done for the iscsi and file-posix drivers
(see commit 82325ae5f2 "Evaluate @exact in protocol drivers").
Reported-by: Xueqiang Wei <xuwei@redhat.com>
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201210125202.858656-1-philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This simply calls bdrv_co_pwrite_zeroes() in all children.
bs->supported_zero_flags is also set to the flags that are supported
by all children.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <2f09c842781fe336b4c2e40036bba577b7430190.1605286097.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The quorum driver does not implement bdrv_co_block_status() and
because of that it always reports to contain data even if all its
children are known to be empty.
One consequence of this is that if we for example create a quorum with
a size of 10GB and we mirror it to a new image the operation will
write 10GB of actual zeroes to the destination image wasting a lot of
time and disk space.
Since a quorum has an arbitrary number of children of potentially
different formats there is no way to report all possible allocation
status flags in a way that makes sense, so this implementation only
reports when a given region is known to contain zeroes
(BDRV_BLOCK_ZERO) or not (BDRV_BLOCK_DATA).
If all children agree that a region contains zeroes then we can return
BDRV_BLOCK_ZERO using the smallest size reported by the children
(because all agree that a region of at least that size contains
zeroes).
If at least one child disagrees we have to return BDRV_BLOCK_DATA.
In this case we use the largest of the sizes reported by the children
that didn't return BDRV_BLOCK_ZERO (because we know that there won't
be an agreement for at least that size).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Tested-by: Tao Xu <tao3.xu@intel.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <db83149afcf0f793effc8878089d29af4c46ffe1.1605286097.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's intended to be inserted between format and protocol nodes to
preallocate additional space (expanding protocol file) on writes
crossing EOF. It improves performance for file-systems with slow
allocation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-9-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Two comment fixes, and bumped the version from 5.2 to 6.0]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add flag to make serialising request no wait: if there are conflicting
requests, just return error immediately. It's will be used in upcoming
preallocate filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We'll need a separate function, which will only "mark" request
serialising with specified align but not wait for conflicting
requests. So, it will be like old bdrv_mark_request_serialising(),
before merging bdrv_wait_serialising_requests_locked() into it.
To reduce the possible mess, let's do the following:
Public function that does both marking and waiting will be called
bdrv_make_request_serialising, and private function which will only
"mark" will be called tracked_request_set_serialising().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bs is linked in req, so no needs to pass it separately. Most of
tracked-requests API doesn't have bs argument. Actually, after this
patch only tracked_request_begin has it, but it's for purpose.
While being here, also add a comment about what "_locked" is.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201021145859.11201-5-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
To be reused in separate.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201021145859.11201-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The comments states, that on misaligned request we should have already
been waiting. But for bdrv_padding_rmw_read, we called
bdrv_mark_request_serialising with align = request_alignment, and now
we serialise with align = cluster_size. So we may have to wait again
with larger alignment.
Note, that the only user of BDRV_REQ_SERIALISING is backup which issues
cluster-aligned requests, so seems the assertion should not fire for
now. But it's wrong anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201021145859.11201-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
nfs_client_open returns the file size in sectors. This effectively
makes it impossible to open files larger than 1TB.
Fixes: c22a034545
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20201209121735.16437-1-pl@kamp.de>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
local_err is not initialized to NULL, it will cause a assert error as below:
qemu/util/error.c:59: error_setv: Assertion `*errp == NULL' failed.
Fixes: c644751069
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201023061218.2080844-8-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If bdrv_co_yield_to_drain() is called for draining a block node that
runs in a different AioContext, it keeps that AioContext locked while it
yields and schedules a BH in the AioContext to do the actual drain.
As long as executing the BH is the very next thing that the event loop
of the node's AioContext does, this actually happens to work, but when
it tries to execute something else that wants to take the AioContext
lock, it will deadlock. (In the bug report, this other thing is a
virtio-scsi device running virtio_scsi_data_plane_handle_cmd().)
Instead, always drop the AioContext lock across the yield and reacquire
it only when the coroutine is reentered. The BH needs to unconditionally
take the lock for itself now.
This fixes the 'block_resize' QMP command on a block node that runs in
an iothread.
Cc: qemu-stable@nongnu.org
Fixes: eb94b81a94
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1903511
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201203172311.68232-4-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.
It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.
So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.
And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.
Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.
Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.
So, alignment can't be greater than 2^30.
Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.
OK, then, let's apply it to block/io.
Let's consider all block/io entry points of offset/bytes:
4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().
We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.
And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:
file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values
Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.
After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.
For all io requests except for discard we keep for now old restriction
of 32bit request length.
iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move bdrv_is_inserted() calls into callers.
We are going to make bdrv_check_byte_request() a clean thing.
bdrv_is_inserted() is not about checking the request, it's about
checking the bs. So, it should be separate.
With this patch we probably change error path for some failure
scenarios. But depending on the fact that querying too big request on
empty cdrom (or corrupted qcow2 node with no drv) will result in EIO
and not ENOMEDIUM would be very strange. More over, we are going to
move to 64bit requests, so larger requests will be allowed anyway.
More over, keeping in mind that cdrom is the only driver that has
.bdrv_is_inserted() handler it's strange that we should care so much
about it in generic block layer, intuitively we should just do read and
write, and cdrom driver should return correct errors if it is not
inserted. But it's a work for another series.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-4-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-3-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should not set overlap_bytes:
1. Don't worry: it is calculated by bdrv_mark_request_serialising() and
will be equal to or greater than bytes anyway.
2. If the request was already aligned up to some greater alignment,
than we may break things: we reduce overlap_bytes, and further
bdrv_mark_request_serialising() may not help, as it will not restore
old bigger alignment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The scenario is that when accessing a volume on an NFS filesystem
without supporting the file lock, Qemu will complain "Failed to lock
byte 100", even when setting the file.locking = off.
We should do file lock related operations only when the file.locking is
enabled, otherwise, the syscall of 'fcntl' will return non-zero.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <1607341446-85506-1-git-send-email-fengli@smartx.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a relatively new feature in libfuse (available since 3.8.0,
which was released in November 2019), so we have to add a dedicated
check whether it is available before making use of it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows allocating areas after the (old) EOF as part of a growing
resize, writing zeroes, and discarding.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These will behave more like normal files in that writes beyond the EOF
will automatically grow the export size.
As an optimization, keep the RESIZE permission for growable exports so
we do not have to take it for every post-EOF write. (This permission is
not released when the export is destroyed, because at that point the
BlockBackend is destroyed altogether anyway.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes the export actually useful instead of only producing errors
whenever it is accessed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block-export-add type=fuse allows mounting block graph nodes via FUSE on
some existing regular file. That file should then appears like a raw
disk image, and accesses to it result in accesses to the exported BDS.
Right now, we only implement the necessary block export functions to set
it up and shut it down. We do not implement any access functions, so
accessing the mount point only results in errors. This will be
addressed by a followup patch.
We keep a hash table of exported mount points, because we want to be
able to detect when users try to use a mount point twice. This is
because we invoke stat() to check whether the given mount point is a
regular file, but if that file is served by ourselves (because it is
already used as a mount point), then this stat() would have to be served
by ourselves, too, which is impossible to do while we (as the caller)
are waiting for it to settle. Therefore, keep track of mount point
paths to at least catch the most obvious instances of that problem.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace manual lock()/unlock() calls with lock guard macros
(QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/iscsi.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201203075055.127773-5-ganqixin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace manual lock()/unlock() calls with lock guard macros
(QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/throttle-groups.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201203075055.127773-4-ganqixin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace manual lock()/unlock() calls with lock guard macros
(QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/curl.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201203075055.127773-3-ganqixin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace manual lock()/unlock() calls with lock guard macros
(QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/accounting.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201203075055.127773-2-ganqixin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change to "expects a THING" where that's an obvious improvement
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-11-armbru@redhat.com>
Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.
Use an explicit if statement for input validation so it cannot
accidentally be compiled out.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By making libvhost-user a subproject, check it builds
standalone (without the global QEMU cflags etc).
Note that the library still relies on QEMU include/qemu/atomic.h and
linux_headers/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-6-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 205fa50750 ("qcow2: Add subcluster support to zero_in_l2_slice()")
introduced a subtle change to code in zero_in_l2_slice:
It swapped the order of
1. qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
2. set_l2_entry(s, l2_slice, l2_index + i, QCOW_OFLAG_ZERO);
3. qcow2_free_any_clusters(bs, old_offset, 1, QCOW2_DISCARD_REQUEST);
To
1. qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
2. qcow2_free_any_clusters(bs, old_offset, 1, QCOW2_DISCARD_REQUEST);
3. set_l2_entry(s, l2_slice, l2_index + i, QCOW_OFLAG_ZERO);
It seems harmless, however the call to qcow2_free_any_clusters can
trigger a cache flush which can mark the L2 table as clean, and
assuming that this was the last write to it, a stale version of it
will remain on the disk.
Now we have a valid L2 entry pointing to a freed cluster. Oops.
Fixes: 205fa50750 ("qcow2: Add subcluster support to zero_in_l2_slice()")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[ kwolf: Fixed to restore the correct original order from before
205fa50750; added comments like in discard_in_l2_slice(). ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201124092815.39056-1-kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- quorum: Fix crash with rewrite-corrupted and without read-write user
- io_uring: do not use pointer after free
- file-posix: Use fallback path for -EBUSY from FALLOC_FL_PUNCH_HOLE
- iotests: Fix failure on Python 3.9 due to use of a deprecated function
- char-stdio: Fix QMP default for 'signal'
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAl+zt1URHGt3b2xmQHJl
ZGhhdC5jb20ACgkQfwmycsiPL9ZxyxAAu8GIOeAb7atQvc+KpeBTUG4A+tfAXkC+
iUYdIpFeWWgmGf7myu3nlaAkeTDk6qHalmzkGRHi3yhX4eNIh5Sdff1YwPcZwf+q
GLIqFFTW0z1Bd36N8G7Mkf04nKX4QTHqp6THHtSt9jNs56h5OP3axPXVA/3v9y8B
4ZAkOOvwnwO+U94crhy5y5pX/Vwafv/Dz4DH9hEupE+EI9AuzjZLBrS+sgkxjhmu
gvHpDSqm6NXwWQA5a24J6NzCy3n/Fw/rqmnoOrN8eRz+4DSCMVDnTDDEMFLa/UoK
Ci7AqWfG/MnQ4GrGsOx80KJhAFLTmI60vfnUizKtEjL/HJyK5PDyM+VxHz+P/Tkq
4hqQsHEsll4mAQiKCrrKOOXhn+YC4DhY/5O1EzEfhqfUjI+BFE9iC7LuqQevwKPL
gytup7eoZjIHMtnKwY1B2ApAqHtodswjHkefcjEcvSlhqGi/BvwuWmeYlFXmA3r0
YO8fvbYJrwHwJy7CzMb5Rgs2461QGERmXoCsBxLAiqXU9rhpOZ6gKXIjjlYojZ8M
W0kqbaccTRPuhooFdEQ9RTPSkX7AX2bI0nOoPxfz3YD/siw35YwnUkJqvQbckvJd
vpPkCL5jt3d9sfO0z1xjSH2ey9bevSReYpCsk+kIZl7V2XoDAW0Nbi0Td3pW4j6x
dEkg/+sjF+o=
=0pFF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Patches for 5.2.0-rc2:
- quorum: Fix crash with rewrite-corrupted and without read-write user
- io_uring: do not use pointer after free
- file-posix: Use fallback path for -EBUSY from FALLOC_FL_PUNCH_HOLE
- iotests: Fix failure on Python 3.9 due to use of a deprecated function
- char-stdio: Fix QMP default for 'signal'
# gpg: Signature made Tue 17 Nov 2020 11:43:17 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests/081: Test rewrite-corrupted without WRITE
iotests/081: Filter image format after testdir
quorum: Require WRITE perm with rewrite-corrupted
io_uring: do not use pointer after free
file-posix: allow -EBUSY errors during write zeros on raw block devices
iotests: Replace deprecated ConfigParser.readfp()
char-stdio: Fix QMP default for 'signal'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using rewrite-corrupted means quorum may issue writes to its children
just from receiving read requests from its parents. Thus, it must take
the WRITE permission when rewrite-corrupted is used.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-2-mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even though only the pointer value is only printed, it is untidy
and Coverity complains.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201113154102.1460459-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Linux, fallocate(fd, FALLOC_FL_PUNCH_HOLE) when it is used on a block device,
without O_DIRECT can return -EBUSY if it races with another write to the same page.
Since this is rare and discard is not a critical operation, ignore this error
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201111153913.41840-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The --enable/disable-vhost-user-blk-server options were implemented in
./configure. There has been confusion about them and part of the problem
is that the shell syntax used for setting the default value is not easy
to read. Move the option over to meson where the conditions are easier
to understand:
have_vhost_user_blk_server = (targetos == 'linux')
if get_option('vhost_user_blk_server').enabled()
if targetos != 'linux'
error('vhost_user_blk_server requires linux')
endif
elif get_option('vhost_user_blk_server').disabled() or not have_system
have_vhost_user_blk_server = false
endif
This patch does not change behavior.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
There have some code style problems be found when read the block driver code.
So I fixes some problems of this error, ERROR: "foo* bar" should be "foo *bar".
Signed-off-by: Liyang Shi <shiliyang@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Message-Id: <3211f389-6d22-46c1-4a16-e6a2ba66f070@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
These compiling errors are fixed:
../block/nfs.c:27:10: fatal error: poll.h: No such file or directory
27 | #include <poll.h>
| ^~~~~~~~
compilation terminated.
../block/nfs.c:63:5: error: unknown type name 'blkcnt_t'
63 | blkcnt_t st_blocks;
| ^~~~~~~~
../block/nfs.c: In function 'nfs_client_open':
../block/nfs.c:550:27: error: 'struct _stat64' has no member named 'st_blocks'
550 | client->st_blocks = st.st_blocks;
| ^
../block/nfs.c: In function 'nfs_get_allocated_file_size':
../block/nfs.c:751:41: error: 'struct _stat64' has no member named 'st_blocks'
751 | return (task.ret < 0 ? task.ret : st.st_blocks * 512);
| ^
../block/nfs.c: In function 'nfs_reopen_prepare':
../block/nfs.c:805:31: error: 'struct _stat64' has no member named 'st_blocks'
805 | client->st_blocks = st.st_blocks;
| ^
../block/nfs.c: In function 'nfs_get_allocated_file_size':
../block/nfs.c:752:1: error: control reaches end of non-void function [-Werror=return-type]
752 | }
| ^
On msys2/mingw, there is no st_blocks in struct _stat64 yet, we disable the usage of it
on msys2/mingw, and create a typedef long long blkcnt_t; for further implementation
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201105123116.674-2-luoyonggang@gmail.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The QCowL2Meta structure is used to store information about a part of
a write request that touches clusters that need changes in their L2
entries. This happens with newly-allocated clusters or subclusters.
This structure has changed a bit since it was first created and its
current documentation is not quite up-to-date.
A write request can span a region consisting of a combination of
clusters of different types, and qcow2_alloc_host_offset() can
repeatedly call handle_copied() and handle_alloc() to add more
clusters to the mix as long as they all are contiguous on the image
file.
Because of this a write request has a list of QCowL2Meta structures,
one for each part of the request that needs changes in the L2
metadata.
Each one of them spans nb_clusters and has two copy-on-write regions
located immediately before and after the middle region touched by that
part of the write request. Even when those regions themselves are
empty their offsets must be correct because they are used to know the
location of the middle region.
This was not always the case but it is not a problem anymore
because the only two places where QCowL2Meta structures are created
(calculate_l2_meta() and qcow2_co_truncate()) ensure that the
copy-on-write regions are correctly defined, and so do assertions like
the ones in perform_cow().
The conditional initialization of the 'written_to' variable is
therefore unnecessary and is removed by this patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201007161323.4667-1-berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The "qemu-common.h" include is not used, remove it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Message-Id: <5F8FFB94.3030209@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+i9YMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpySQH/Ru/sxB9PncR1HsqSf0HC0tt/EMKgyZTXEwQ
FITcjkCvBDS98a1VUvvZbjzTEDEZNnoUv94MjdLeBoptJ7GtK6nPoI6Ke0p1Zqbe
mlY2BCb0FpN8FE+mthjAI03mhw6o8Qo/OPtyISQzUxCVVqUHL5TRAVAQdeidoK8n
RBQ4WogwM/h7wI0d9GGgSxAON8IRQnBYImtzJieBb6zeScwKVFTWI1tqBdOyFN0/
AhzQiNZuhZ7a1XGJIsxmWB1NK2kcXNJuOF0ANh4coIHR0JzmH3xRy+Jnf5e3dYsw
LI23DUZPSTJJXAwKPucyTG7RTX8F55N9DVHC9KDRD6Ntq1oreJ4=
=pcbN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,virtio: fixes
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 04 Nov 2020 18:40:03 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
contrib/vhost-user-blk: fix get_config() information leak
block/export: fix vhost-user-blk get_config() information leak
block/export: make vhost-user-blk config space little-endian
configure: introduce --enable-vhost-user-blk-server
libvhost-user: follow QEMU comment style
vhost-blk: set features before setting inflight feature
Revert "vhost-blk: set features before setting inflight feature"
net: Add vhost-vdpa in show_netdevs()
vhost-vdpa: Add qemu_close in vhost_vdpa_cleanup
vfio: Don't issue full 2^64 unmap
virtio-iommu: Set supported page size mask
vfio: Set IOMMU page size as per host supported page size
memory: Add interface to set iommu page size mask
virtio-iommu: Add notify_flag_changed() memory region callback
virtio-iommu: Add replay() memory region callback
virtio-iommu: Call memory notifiers in attach/detach
virtio-iommu: Add memory notifiers for map/unmap
virtio-iommu: Store memory region in endpoint struct
virtio-iommu: Fix virtio_iommu_mr()
hw/smbios: Fix leaked fd in save_opt_one() error path
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refuse get_config() requests in excess of sizeof(struct virtio_blk_config).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 devices have little-endian configuration space. The
vhost-user-blk-server.c code already uses little-endian for virtqueue
processing but not for the configuration space fields. Fix this so the
vhost-user-blk export works on big-endian hosts.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it possible to compile out the vhost-user-blk server. It is enabled
by default on Linux.
Note that vhost-user-server.c depends on libvhost-user, which requires
CONFIG_LINUX. The CONFIG_VHOST_USER dependency was erroneous since that
option controls vhost-user frontends (previously known as "master") and
not device backends (previously known as "slave").
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Completion Queue Command Identifier is a 16-bit value,
so nvme_submit_command() is unlikely to work on big-endian
hosts, as the relevant bits are truncated.
Fix by using the correct byte-swap function.
Fixes: bdd6a90a9e ("block: Add VFIO based NVMe driver")
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201029093306.1063879-25-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
qemu_vfio_pci_map_bar() calls mmap(), and mmap(2) states:
'offset' must be a multiple of the page size as returned
by sysconf(_SC_PAGE_SIZE).
In commit f68453237b we started to use an offset of 4K which
broke this contract on Aarch64 arch.
Fix by mapping at offset 0, and and accessing doorbells at offset=4K.
Fixes: f68453237b ("block/nvme: Map doorbells pages write-only")
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-24-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Make sure iov's va and size are properly aligned on the
host page size.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-23-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
In preparation of 64kB host page support, let's change the size
and alignment of the prp_list_pages so that the VFIO DMA MAP succeeds
with 64kB host page size. We align on the host page size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-22-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
In preparation of 64kB host page support, let's change the size
and alignment of the queue so that the VFIO DMA MAP succeeds.
We align on the host page size.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-21-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
In preparation of 64kB host page support, let's change the size
and alignment of the IDENTIFY command response buffer so that
the VFIO DMA MAP succeeds. We align on the host page size.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-20-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
While trying to simplify the code using a macro, we forgot
the 12-bit shift... Correct that.
Fixes: fad1eb6886 ("block/nvme: Use register definitions from 'block/nvme.h'")
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-19-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Commit bdd6a90a9e ("block: Add VFIO based NVMe driver")
sets the request_alignment in nvme_refresh_limits().
For consistency, also set it during initialization.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-18-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
As all commands use the ADMIN queue, it is pointless to pass
it as argument each time. Remove the argument, and rename the
function as nvme_admin_cmd_sync() to make this new behavior
clearer.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201029093306.1063879-17-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
We don't need to dereference from BDRVNVMeState each time.
Use a NVMeQueuePair pointer on the admin queue.
The nvme_init() becomes easier to review, matching the style
of nvme_add_io_queue().
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-16-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
From the specification chapter 3.1.8 "AQA - Admin Queue Attributes"
the Admin Submission Queue Size field is a 0’s based value:
Admin Submission Queue Size (ASQS):
Defines the size of the Admin Submission Queue in entries.
Enabling a controller while this field is cleared to 00h
produces undefined results. The minimum size of the Admin
Submission Queue is two entries. The maximum size of the
Admin Submission Queue is 4096 entries.
This is a 0’s based value.
This bug has never been hit because the device initialization
uses a single command synchronously :)
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-15-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Replace magic values by definitions, and simplifiy since the
number of queues will never reach 64K.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-14-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.
Directly pass errp as the local_err is not requested in our
case. This simplifies a bit nvme_create_queue_pair().
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-12-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.
Directly pass errp as the local_err is not requested in our
case.
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201029093306.1063879-11-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
We can not have negative queue count/size/index, use unsigned type.
Rename 'nr_queues' as 'queue_count' to match the spec naming.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-10-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
To be able to use some definitions in structure declarations,
move them earlier. No logical change.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-9-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-8-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
What we want to trace is the block driver state and the queue index.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
As we want to enable multiple queues, report the event
in each nvme_poll_queue() call, rather than once in
the callback calling nvme_poll_queues().
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-6-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Controllers have different capabilities and report them in the
CAP register. We are particularly interested by the page size
limits.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Instead of displaying warning on stderr, use warn_report()
which also displays it on the monitor.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Use the same format used for the hw/vfio/ trace events.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
In addition, fix two error format problems found by checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
+ fprintf(stderr,"%s attributes=0x%02x begin=%u size=%d\n",
^
ERROR: line over 90 characters
+ fprintf(stderr, "%d, %s (%u, %d)\n", i, commit->path ? commit->path : "(null)", commit->param.rename.cluster, commit->action);
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA12620.6030705@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow the server to expose an additional metacontext to be requested
by savvy clients. qemu-nbd adds a new option -A to expose the
qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this
can also be set via QMP when using block-export-add.
qemu as client is hacked into viewing the key aspects of this new
context by abusing the already-experimental x-dirty-bitmap option to
collapse all depths greater than 2, which results in a tri-state value
visible in the output of 'qemu-img map --output=json' (yes, that means
x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like
renaming it as it would introduce a needless break of back-compat,
even though we make no compat guarantees with x- members):
unallocated (depth 0) => "zero":false, "data":true
local (depth 1) => "zero":false, "data":false
backing (depth 2+) => "zero":true, "data":true
libnbd as client is probably a nicer way to get at the information
without having to decipher such hacks in qemu as client. ;)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-11-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
When checking for allocation across a chain, it's already easy to
count the depth within the chain at which the allocation is found.
Instead of throwing that information away, return it to the caller.
Existing callers only cared about allocated/non-allocated, but having
a depth available will be used by NBD in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-9-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
If a BDS gets deleted during blk_drain_all(), it might miss a
call to bdrv_do_drained_end(). This means missing a call to
aio_enable_external() and the AIO context remains disabled for
ever. This can cause a device to become irresponsive and to
disrupt the guest execution, ie. hang, loop forever or worse.
This scenario is quite easy to encounter with virtio-scsi
on POWER when punching multiple blockdev-create QMP commands
while the guest is booting and it is still running the SLOF
firmware. This happens because SLOF disables/re-enables PCI
devices multiple times via IO/MEM/MASTER bits of PCI_COMMAND
register after the initial probe/feature negotiation, as it
tends to work with a single device at a time at various stages
like probing and running block/network bootloaders without
doing a full reset in-between. This naturally generates many
dataplane stops and starts, and thus many drain sections that
can race with blockdev_create_run(). In the end, SLOF bails
out.
It is somehow reproducible on x86 but it requires to generate
articial dataplane start/stop activity with stop/cont QMP
commands. In this case, seabios ends up looping for ever,
waiting for the virtio-scsi device to send a response to
a command it never received.
Add a helper that pairs all previously called bdrv_do_drained_begin()
with a bdrv_do_drained_end() and call it from bdrv_close().
While at it, update the "/bdrv-drain/graph-change/drain_all"
test in test-bdrv-drain so that it can catch the issue.
BugId: https://bugzilla.redhat.com/show_bug.cgi?id=1874441
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160346526998.272601.9045392804399803158.stgit@bahia.lan>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit c8bb23cbdb when a write
request results in a new allocation QEMU first tries to see if the
rest of the cluster outside the written area contains only zeroes.
In that case, instead of doing a normal copy-on-write operation and
writing explicit zero buffers to disk, the code zeroes the whole
cluster efficiently using pwrite_zeroes() with BDRV_REQ_NO_FALLBACK.
This improves performance very significantly but it only happens when
we are writing to an area that was completely unallocated before. Zero
clusters (QCOW2_CLUSTER_ZERO_*) are treated like normal clusters and
are therefore slower to allocate.
This happens because the code uses bdrv_is_allocated_above() rather
bdrv_block_status_above(). The former is not as accurate for this
purpose but it is faster. However in the case of qcow2 the underlying
call does already report zero clusters just fine so there is no reason
why we cannot use that information.
After testing 4KB writes on an image that only contains zero clusters
this patch results in almost five times more IOPS.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <6d77cab968c501c44d6e1089b9bc91b04170b49e.1603731354.git.berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a BlockDriverState supports backing files but has none then any
unallocated area reads back as zeroes.
bdrv_co_block_status() is only reporting this is if want_zero is true,
but this is an inexpensive test and there is no reason not to do it in
all cases.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <66fa0914a0e2b727ab6d1b63ca773d7cd29a9a9e.1603731354.git.berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_allocated_above wrongly handles short backing files: it reports
after-EOF space as UNALLOCATED which is wrong, as on read the data is
generated on the level of short backing file (if all overlays have
unallocated areas at that place).
Reusing bdrv_common_block_status_above fixes the issue and unifies code
path.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20200924194003.22080-5-vsementsov@virtuozzo.com
[Fix s/has/have/ as suggested by Eric Blake. Fix s/area/areas/.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are going to reuse bdrv_common_block_status_above in
bdrv_is_allocated_above. bdrv_is_allocated_above may be called with
include_base == false and still bs == base (for ex. from img_rebase()).
So, support this corner case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20200924194003.22080-4-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to reuse bdrv_common_block_status_above in
bdrv_is_allocated_above, let's support include_base parameter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200924194003.22080-3-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_co_block_status_above has several design problems with handling
short backing files:
1. With want_zeros=true, it may return ret with BDRV_BLOCK_ZERO but
without BDRV_BLOCK_ALLOCATED flag, when actually short backing file
which produces these after-EOF zeros is inside requested backing
sequence.
2. With want_zero=false, it may return pnum=0 prior to actual EOF,
because of EOF of short backing file.
Fix these things, making logic about short backing files clearer.
With fixed bdrv_block_status_above we also have to improve is_zero in
qcow2 code, otherwise iotest 154 will fail, because with this patch we
stop to merge zeros of different types (produced by fully unallocated
in the whole backing chain regions vs produced by short backing files).
Note also, that this patch leaves for another day the general problem
around block-status: misuse of BDRV_BLOCK_ALLOCATED as is-fs-allocated
vs go-to-backing.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200924194003.22080-2-vsementsov@virtuozzo.com
[Fix s/comes/come/ as suggested by Eric Blake
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow the number of queues to be configured using --export
vhost-user-blk,num-queues=N. This setting should match the QEMU --device
vhost-user-blk-pci,num-queues=N setting but QEMU vhost-user-blk.c lowers
its own value if the vhost-user-blk backend offers fewer queues than
QEMU.
The vhost-user-blk-server.c code is already capable of multi-queue. All
virtqueue processing runs in the same AioContext. No new locking is
needed.
Add the num-queues=N option and set the VIRTIO_BLK_F_MQ feature bit.
Note that the feature bit only announces the presence of the num_queues
configuration space field. It does not promise that there is more than 1
virtqueue, so we can set it unconditionally.
I tested multi-queue by running a random read fio test with numjobs=4 on
an -smp 4 guest. After the benchmark finished the guest /proc/interrupts
file showed activity on all 4 virtio-blk MSI-X. The /sys/block/vda/mq/
directory shows that Linux blk-mq has 4 queues configured.
An automated test is included in the next commit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201001144604.559733-2-stefanha@redhat.com
[Fixed accidental tab characters as suggested by Markus Armbruster
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make it possible to specify the iothread where the export will run. By
default the block node can be moved to other AioContexts later and the
export will follow. The fixed-iothread option forces strict behavior
that prevents changing AioContext while the export is active. See the
QAPI docs for details.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200929125516.186715-5-stefanha@redhat.com
[Fix stray '#' character in block-export.json and add missing "(since:
5.2)" as suggested by Eric Blake.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block exports are used by softmmu, qemu-storage-daemon, and qemu-nbd.
They are not used by other programs and are not otherwise needed in
libblock.
Undo the recent move of blockdev-nbd.c from blockdev_ss into block_ss.
Since bdrv_close_all() (libblock) calls blk_exp_close_all()
(libblockdev) a stub function is required..
Make qemu-nbd.c use signal handling utility functions instead of
duplicating the code. This helps because os-posix.c is in libblockdev
and it depends on a qemu_system_killed() symbol that qemu-nbd.c lacks.
Once we use the signal handling utility functions we also end up
providing the necessary symbol.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200929125516.186715-4-stefanha@redhat.com
[Fixed s/ndb/nbd/ typo in commit description as suggested by Eric Blake
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't compile contrib/libvhost-user/libvhost-user.c again. Instead build
the static library once and then reuse it throughout QEMU.
Also switch from CONFIG_LINUX to CONFIG_VHOST_USER, which is what the
vhost-user tools (vhost-user-gpu, etc) do.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-14-stefanha@redhat.com
[Added CONFIG_LINUX again because libvhost-user doesn't build on macOS.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers used by other subsystems are located in include/. Also add the
vhost-user-server and vhost-user-blk-server headers to MAINTAINERS.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-13-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new QAPI block exports API instead of defining our own QOM
objects.
This is a large change because the lifecycle of VuBlockDev needs to
follow BlockExportDriver. QOM properties are replaced by QAPI options
objects.
VuBlockDev is renamed VuBlkExport and contains a BlockExport field.
Several fields can be dropped since BlockExport already has equivalents.
The file names and meson build integration will be adjusted in a future
patch. libvhost-user should probably be built as a static library that
is linked into QEMU instead of as a .c file that results in duplicate
compilation.
The new command-line syntax is:
$ qemu-storage-daemon \
--blockdev file,node-name=drive0,filename=test.img \
--export vhost-user-blk,node-name=drive0,id=export0,unix-socket=/tmp/vhost-user-blk.sock
Note that unix-socket is optional because we may wish to accept chardevs
too in the future.
Markus noted that supported address families are not explicit in the
QAPI schema. It is unlikely that support for more address families will
be added since file descriptor passing is required and few address
families support it. If a new address family needs to be added, then the
QAPI 'features' syntax can be used to advertize them.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200924151549.913737-12-stefanha@redhat.com
[Skip test on big-endian host architectures because this device doesn't
support them yet (as already mentioned in a code comment).
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Propagate the flush return value since errors are possible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-11-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vu_client_trip() coroutine is leaked during AioContext switching. It
is also unsafe to destroy the vu_dev in panic_cb() since its callers
still access it in some cases.
Rework the lifecycle to solve these safety issues.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The device panic notifier callback is not used. Drop it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Only one struct is needed per request. Drop req_data and the separate
VuBlockReq instance. Instead let vu_queue_pop() allocate everything at
once.
This fixes the req_data memory leak in vu_block_virtio_process_req().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
By making use of libvhost-user, block device drive can be shared to
the connected vhost-user client. Only one client can connect to the
server one time.
Since vhost-user-server needs a block drive to be created first, delay
the creation of this object.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200918080912.321299-6-coiby.xu@gmail.com
[Shorten "vhost_user_blk_server" string to "vhost_user_blk" to avoid the
following compiler warning:
../block/export/vhost-user-blk-server.c:178:50: error: ‘%s’ directive output truncated writing 21 bytes into a region of size 20 [-Werror=format-truncation=]
and fix "Invalid size %ld ..." ssize_t format string arguments for
32-bit hosts.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this fixes non-TCG builds broken recently by replay reverse debugging.
Stub the needed functions in stub/, splitting roughly between functions
needed only by system emulation, by system emulation and tools,
and by everyone. This includes duplicating some code in replay/, and
puts the logic for non-replay related events in the replay/ module (+
the stubs), so this should be revisited in the future.
Surprisingly, only _one_ qtest was affected by this, ide-test.c, which
resulted in a buzz as the bh events were never delivered, and the bh
never executed.
Many other subsystems _should_ have been affected.
This fixes the immediate issue, however a better way to group replay
functionality to TCG-only code could be developed in the long term.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201013192123.22632-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This thread from a little over a year ago:
http://lists.wpkg.org/pipermail/sheepdog/2019-March/thread.html
states that sheepdog is no longer actively developed. The only mentioned
users are some companies who are said to have it for legacy reasons with
plans to replace it by Ceph. There is talk about cutting out existing
features to turn it into a simple demo of how to write a distributed
block service. There is no evidence of anyone working on that idea:
https://github.com/sheepdog/sheepdog/commits/master
No real commits to git since Jan 2018, and before then just some minor
technical debt cleanup.
There is essentially no activity on the mailing list aside from
patches to QEMU that get CC'd due to our MAINTAINERS entry.
Fedora packages for sheepdog failed to build from upstream source
because of the more strict linker that no longer merges duplicate
global symbols. Fedora patches it to add the missing "extern"
annotations and presumably other distros do to, but upstream source
remains broken.
There is only basic compile testing, no functional testing of the
driver.
Since there are no build pre-requisites the sheepdog driver is currently
enabled unconditionally. This would result in configure issuing a
deprecation warning by default for all users. Thus the configure default
is changed to disable it, requiring users to pass --enable-sheepdog to
build the driver.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201002113243.2347710-3-berrange@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fedora 32 gcc 10 seems to give false positives:
Compiling C object libblock.fa.p/block_vmdk.c.o
../block/vmdk.c: In function ‘vmdk_parse_extents’:
../block/vmdk.c:587:5: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
587 | g_free(extent->l1_table);
| ^~~~~~~~~~~~~~~~~~~~~~~~
../block/vmdk.c:754:17: note: ‘extent’ was declared here
754 | VmdkExtent *extent;
| ^~~~~~
../block/vmdk.c:620:11: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
620 | ret = vmdk_init_tables(bs, extent, errp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../block/vmdk.c:598:17: note: ‘extent’ was declared here
598 | VmdkExtent *extent;
| ^~~~~~
../block/vmdk.c:1178:39: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1178 | extent->flat_start_offset = flat_offset << 9;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
../block/vmdk.c: In function ‘vmdk_open_vmdk4’:
../block/vmdk.c:581:22: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
581 | extent->l2_cache =
| ~~~~~~~~~~~~~~~~~^
582 | g_malloc(extent->entry_size * extent->l2_size * L2_CACHE_SIZE);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../block/vmdk.c:872:17: note: ‘extent’ was declared here
872 | VmdkExtent *extent;
| ^~~~~~
../block/vmdk.c: In function ‘vmdk_open’:
../block/vmdk.c:620:11: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
620 | ret = vmdk_init_tables(bs, extent, errp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../block/vmdk.c:598:17: note: ‘extent’ was declared here
598 | VmdkExtent *extent;
| ^~~~~~
cc1: all warnings being treated as errors
make: *** [Makefile.ninja:884: libblock.fa.p/block_vmdk.c.o] Error 1
fix them by assigning a default value.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Message-Id: <20200930155859.303148-2-borntraeger@de.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In a recent commit 12c75e20a2 we've improved
nbd_co_reconnect_loop() to not make drain wait for additional sleep.
Similarly, we shouldn't try to connect, if previous sleep was
interrupted by drain begin, otherwise drain_begin will have to wait for
the whole connection attempt.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200903190301.367620-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
reconnect-delay has a design flaw: we handle it in the same loop where
we do connection attempt. So, reconnect-delay may be exceeded by
unpredictable time of connection attempt.
Let's instead use separate timer.
How to reproduce the bug:
1. Create an image on node1:
qemu-img create -f qcow2 xx 100M
2. Start NBD server on node1:
qemu-nbd xx
3. On node2 start qemu-io:
./build/qemu-io --image-opts \
driver=nbd,server.type=inet,server.host=192.168.100.5,server.port=10809,reconnect-delay=15
4. Type 'read 0 512' in qemu-io interface to check that connection
works
Be careful: you should make steps 5-7 in a short time, less than 15
seconds.
5. Kill nbd server on node1
6. Run 'read 0 512' in qemu-io interface again, to be sure that nbd
client goes to reconnect loop.
7. On node1 run the following command
sudo iptables -A INPUT -p tcp --dport 10809 -j DROP
This will make the connect() call of qemu-io at node2 take a long time.
And you'll see that read command in qemu-io will hang for a long time,
more than 15 seconds specified by reconnect-delay parameter. It's the
bug.
8. Don't forget to drop iptables rule on node1:
sudo iptables -D INPUT -p tcp --dport 10809 -j DROP
Important note: Step [5] is necessary to reproduce _this_ bug. If we
miss step [5], the read command (step 6) will hang for a long time and
this commit doesn't help, because there will be not long connect() to
unreachable host, but long sendmsg() to unreachable host, which should
be fixed by enabling and adjusting keep-alive on the socket, which is a
thing for further patch set.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200903190301.367620-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Don't use nbd_client_detach_aio_context() driver handler where we want
to finalize the connection. We should directly use
qio_channel_detach_aio_context() in such cases. Driver handler may (and
will) contain another things, unrelated to the qio channel.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200903190301.367620-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We pause reconnect process during drained section. So, if we have some
requests, waiting for reconnect we should cancel them, otherwise they
deadlock the drained section.
How to reproduce:
1. Create an image:
qemu-img create -f qcow2 xx 100M
2. Start NBD server:
qemu-nbd xx
3. Start vm with second nbd disk on node2, like this:
./build/x86_64-softmmu/qemu-system-x86_64 -nodefaults -drive \
file=/work/images/cent7.qcow2 -drive \
driver=nbd,server.type=inet,server.host=192.168.100.5,server.port=10809,reconnect-delay=60 \
-vnc :0 -m 2G -enable-kvm -vga std
4. Access the vm through vnc (or some other way?), and check that NBD
drive works:
dd if=/dev/sdb of=/dev/null bs=1M count=10
- the command should succeed.
5. Now, kill the nbd server, and run dd in the guest again:
dd if=/dev/sdb of=/dev/null bs=1M count=10
Now Qemu is trying to reconnect, and dd-generated requests are waiting
for the connection (they will wait up to 60 seconds (see
reconnect-delay option above) and than fail). But suddenly, vm may
totally hang in the deadlock. You may need to increase reconnect-delay
period to catch the dead-lock.
VM doesn't respond because drain dead-lock happens in cpu thread with
global mutex taken. That's not good thing by itself and is not fixed
by this commit (true way is using iothreads). Still this commit fixes
drain dead-lock itself.
Note: probably, we can instead continue to reconnect during drained
section. To achieve this, we may move negotiation to the connect thread
to make it independent of bs aio context. But expanding drained section
doesn't seem good anyway. So, let's now fix the bug the simplest way.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200903190301.367620-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v4 changes:
- squashed format update with test output update
v7 changes:
- introduced the spaces between the fields in snapshot info output
- updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces the icount field for saving within the snapshot.
It is required for navigation between the snapshots in record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v7 changes:
- also fix the test which checks qcow2 snapshot extra data
Message-Id: <160174518284.12451.2301137308458777398.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like for read/write in a previous commit, drop extra indirection layer,
generate directly bdrv_readv_vmstate() and bdrv_writev_vmstate().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200924185414.28642-8-vsementsov@virtuozzo.com>
Now that we are not maintaining boilerplate code for coroutine
wrappers, there is no more sense in keeping the extra indirection layer
of bdrv_prwv(). Let's drop it and instead generate pure bdrv_preadv()
and bdrv_pwritev().
Currently, bdrv_pwritev() and bdrv_preadv() are returning bytes on
success, auto generated functions will instead return zero, as their
_co_ prototype. Still, it's simple to make the conversion safe: the
only external user of bdrv_pwritev() is test-bdrv-drain, and it is
comfortable enough with bdrv_co_pwritev() instead. So prototypes are
moved to local block/coroutines.h. Next, the only internal use is
bdrv_pread() and bdrv_pwrite(), which are modified to return bytes on
success.
Of course, it would be great to convert bdrv_pread() and bdrv_pwrite()
to return 0 on success. But this requires audit (and probably
conversion) of all their users, let's leave it for another day
refactoring.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200924185414.28642-7-vsementsov@virtuozzo.com>
Use code generation implemented in previous commit to generated
coroutine wrappers in block.c and block/io.c
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200924185414.28642-6-vsementsov@virtuozzo.com>
We have a very frequent pattern of creating a coroutine from a function
with several arguments:
- create a structure to pack parameters
- create _entry function to call original function taking parameters
from struct
- do different magic to handle completion: set ret to NOT_DONE or
EINPROGRESS or use separate bool field
- fill the struct and create coroutine from _entry function with this
struct as a parameter
- do coroutine enter and BDRV_POLL_WHILE loop
Let's reduce code duplication by generating coroutine wrappers.
This patch adds scripts/block-coroutine-wrapper.py together with some
friends, which will generate functions with declared prototypes marked
by the 'generated_co_wrapper' specifier.
The usage of new code generation is as follows:
1. define the coroutine function somewhere
int coroutine_fn bdrv_co_NAME(...) {...}
2. declare in some header file
int generated_co_wrapper bdrv_NAME(...);
with same list of parameters (generated_co_wrapper is
defined in "include/block/block.h").
3. Make sure the block_gen_c declaration in block/meson.build
mentions the file with your marker function.
Still, no function is now marked, this work is for the following
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924185414.28642-5-vsementsov@virtuozzo.com>
[Added encoding='utf-8' to open() calls as requested by Vladimir. Fixed
typo and grammar issues pointed out by Eric Blake. Removed clang-format
dependency that caused build test issues.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are going to keep coroutine-wrappers code (structure-packing
parameters, BDRV_POLL wrapper functions) in separate auto-generated
files. So, we'll need a header with declaration of original _co_
functions, for those which are static now. As well, we'll need
declarations for wrapper functions. Do these declarations now, as a
preparation step.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200924185414.28642-4-vsementsov@virtuozzo.com>
Most of our coroutine wrappers already follow this convention:
We have 'coroutine_fn bdrv_co_<something>(<normal argument list>)' as
the core function, and a wrapper 'bdrv_<something>(<same argument
list>)' which does parameter packing and calls bdrv_run_co().
The only outsiders are the bdrv_prwv_co and
bdrv_common_block_status_above wrappers. Let's refactor them to behave
as the others, it simplifies further conversion of coroutine wrappers.
This patch adds an indirection layer, but it will be compensated by
a further commit, which will drop bdrv_co_prwv together with the
is_write logic, to keep the read and write paths separate.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200924185414.28642-3-vsementsov@virtuozzo.com>
Use self-explicit SCALE_MS definition instead of magic value
(missed in similar commit e4f310fe7f).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-7-philmd@redhat.com>
Use the NVMe register definitions from "block/nvme.h" which
ease a bit reviewing the code while matching the datasheet.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-6-philmd@redhat.com>
NVMeRegs only contains NvmeBar. Simplify the code by using NvmeBar
directly.
This triggers a checkpatch.pl error:
ERROR: Use of volatile is usually wrong, please add a comment
#30: FILE: block/nvme.c:691:
+ volatile NvmeBar *regs;
This is a false positive as in our case we are using I/O registers,
so the 'volatile' use is justified.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-5-philmd@redhat.com>
We only access the I/O register in nvme_init().
Remove the reference in BDRVNVMeState and reduce its scope.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-4-philmd@redhat.com>
Per the datasheet sections 3.1.13/3.1.14:
"The host should not read the doorbell registers."
As we don't need read access, map the doorbells with write-only
permission. We keep a reference to this mapped address in the
BDRVNVMeState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-3-philmd@redhat.com>
Pages are currently mapped READ/WRITE. To be able to use different
protections, add a new argument to qemu_vfio_pci_map_bar().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-2-philmd@redhat.com>
We overlooked these in 02b1ecfa10
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200928162333.14998-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'writable' option is a basic option that will probably be applicable
to most if not all export types that we will implement. Move it from NBD
to the generic BlockExport layer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-26-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a simple QMP command to query the list of block exports.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-25-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every export type will need a BlockBackend, so creating it centrally in
blk_exp_add() instead of the .create driver callback avoids duplication.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-24-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every block export has a BlockBackend representing the disk that is
exported. It should live in BlockExport therefore.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-23-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clients may want to know when an export has finally disappeard
(block-export-del returns earlier than that in the general case), so add
a QAPI event for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-22-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implement a new QMP command block-export-del and make nbd-server-remove
a wrapper around it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The reference owned by the user/monitor that is created when adding the
export and dropped when removing it was tied to the 'exports' list in
nbd/server.c. Every block export will have a user reference, so move it
to the block export level and tie it to the 'block_exports' list in
block/export/export.c instead. This is necessary for introducing a QMP
command for removing exports.
Note that exports are present in block_exports even after the user has
requested shutdown. This is different from NBD's exports where exports
are immediately removed on a shutdown request, even if they are still in
the process of shutting down. In order to avoid that the user still
interacts with an export that is shutting down (and possibly removes it
a second time), we need to remember if the user actually still owns it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-20-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll need an id to identify block exports in monitor commands. This
adds one.
Note that this is different from the 'name' option in the NBD server,
which is the externally visible export name. While block export ids need
to be unique in the whole process, export names must be unique only for
the same server. Different export types or (potentially in the future)
multiple NBD servers can have the same export name externally, but still
need different block export ids internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a function to shut down all block exports, and another one to
shut down the block exports of a single type. The latter is used for now
when stopping the NBD server. As soon as we implement support for
multiple NBD servers, we'll need a per-server list of exports and it
will be replaced by a function using that.
As a side effect, the BlockExport layer has a list tracking all existing
exports now. closed_exports loses its only user and can go away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-18-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of letting the driver allocate and return the BlockExport
object, allocate it already in blk_exp_add() and pass it. This allows us
to initialise the generic part before calling into the driver so that
the driver can just use these values instead of having to parse the
options a second time.
For symmetry, move freeing the BlockExport to blk_exp_unref().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-17-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every block export needs a block node to export, so add a 'node-name'
option to BlockExportOptions and remove the replaced option 'device'
from BlockExportOptionsNbd.
To maintain compatibility in nbd-server-add, BlockExportOptionsNbd needs
to be wrapped by a new type NbdServerAddOptions that adds 'device' back
because nbd-server-add doesn't use the BlockExportOptions base type at
all (so even without changing it to a 'node-name' option in
block-export-add, this compatibility code would be necessary).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-16-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-15-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Having a refcount makes sense for all types of block exports. It is also
a prerequisite for keeping a list of all exports at the BlockExport
level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-14-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a QMP equivalent of qemu-nbd's --shared option, limiting the
maximum number of clients that can attach at the same time.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-9-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd-server-add tries to be convenient and adds two questionable
features that we don't want to share in block-export-add, even for NBD
exports:
1. When requesting a writable export of a read-only device, the export
is silently downgraded to read-only. This should be an error in the
context of block-export-add.
2. When using a BlockBackend name, unplugging the device from the guest
will automatically stop the NBD server, too. This may sometimes be
what you want, but it could also be very surprising. Let's keep
things explicit with block-export-add. If the user wants to stop the
export, they should tell us so.
Move these things into the nbd-server-add QMP command handler so that
they apply only there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to have a common set of commands for all types of block exports.
Currently, this is only NBD, but we're going to add more types.
This patch adds the basic BlockExport and BlockExportDriver structs and
a QMP command block-export-add that creates a new export based on the
given BlockExportOptions.
qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-5-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The name BlockExport will be used for the struct containing the runtime
state of block exports, so change the name of export creation options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-4-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move all block export related types and commands from block-core to the
new QAPI module block-export.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-3-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use self-explicit NANOSECONDS_PER_SECOND definition instead
of magic value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200921110145.520944-1-philmd@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the query-uuid command to machine.json pulls less
QAPI-generated code into user-mode.
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-6-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Currently at startup if using cache=none on a filesystem lacking
O_DIRECT such as tmpfs, at startup QEMU prints
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument
while at QMP level the hint is missing, so QEMU reports just
"error": {
"class": "GenericError",
"desc": "Could not open '/tmp/foo.img': Invalid argument"
}
which is close to useless for the end user trying to figure out what
they did wrong.
With this change at startup QEMU prints
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img': filesystem does not support O_DIRECT
while at the QMP level QEMU reports a massively more informative
"error": {
"class": "GenericError",
"desc": "Unable to open '/tmp/foo.img': filesystem does not support O_DIRECT"
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 19ae9ae014 ("block/rbd: Add support for ceph namespaces")
introduced namespace support for RBD, but we forgot to add the
new 'namespace' options to qemu_rbd_strong_runtime_opts[].
The 'namespace' is used to identify the image, so it is a strong
option since it can changes the data of a BDS.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1821528
Fixes: 19ae9ae014 ("block/rbd: Add support for ceph namespaces")
Cc: Florian Florensa <fflorensa@online.net>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200914190553.74871-1-sgarzare@redhat.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_alloc_cluster_offset() takes an (unaligned) guest offset and
returns the (aligned) offset of the corresponding cluster in the qcow2
image.
In practice none of the callers need to know where the cluster starts
so this patch makes the function calculate and return the final host
offset directly. The function is also renamed accordingly.
See 388e581615 for a similar change to qcow2_get_cluster_offset().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <9bfef50ec9200d752413be4fc2aeb22a28378817.1599833007.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function preallocates metadata structures and then extends the
image to its new size, but that new size calculation is wrong because
it doesn't take into account that the host_offset variable is always
cluster-aligned.
This problem can be reproduced with preallocation=metadata when the
original size is not cluster-aligned but the new size is. In this case
the final image size will be shorter than expected.
qemu-img create -f qcow2 img.qcow2 31k
qemu-img resize --preallocation=metadata img.qcow2 128k
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <adeb8b059917b141d5f5b3bd2a016262d3052c79.1599833007.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Mark compat=0.10 unsupported for iotest 125]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Introduced by d85f4222b4,
These were seemingly never used at all.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200806211345.2925343-3-jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This saw its last use in 4bfb274165.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200806211345.2925343-2-jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function checks the current status of a (sub)cluster in order to
see if an unaligned 'write zeroes' request can be done efficiently by
simply updating the L2 metadata and without having to write actual
zeroes to disk.
If the situation does not allow using the fast path then the function
returns -ENOTSUP and the caller falls back to writing zeroes.
If can happen however that the aforementioned check returns an actual
error code so in this case we should pass it to the caller.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200909123739.719-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function takes an L2 entry and a number of clusters to free.
Although in principle it can free any type of cluster (using the L2
entry to determine its type) in practice the API is broken because
compressed clusters have a variable size and there is no way to free
more than one without having the L2 entry of each one of them.
The good news all callers are passing nb_clusters=1 so we can simply
get rid of that parameter.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <77cea0f4616f921d37e971b3c5b18a2faa24b173.1599573989.git.berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If qcow2_alloc_cluster_offset() or qcow2_alloc_cluster_link_l2() fail
then this function simply returns the error code, potentially leaking
the QCowL2Meta structure and leaving stale items in s->cluster_allocs.
A second problem is that this function calls qcow2_free_any_clusters()
on failure but passing a host cluster offset instead of an L2 entry.
Luckily for normal uncompressed clusters a raw offset also works like
a valid L2 entry so it works just the same, but we should be using
qcow2_free_clusters() instead.
This patch fixes both problems by using qcow2_handle_l2meta().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <cd3a6b9abd43f9c0b60be413d760f0cacc67eb66.1599573989.git.berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
block/vhdx uses qemu block layer where sector size is always 512 bytes.
This may have issues with 4K logical sector sized vhdx image.
For e.g qemu-img convert on such images fails with following assert:
$qemu-img convert -f vhdx -O raw 4KTest1.vhdx test.raw
qemu-img: util/iov.c:388: qiov_slice: Assertion `offset + len <=
qiov->size' failed.
Aborted
This patch adds an check to return ENOTSUP for vhdx images which
have logical sector size other than 512 bytes.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Message-Id: <1596794594-44531-1-git-send-email-swapnil.ingle@nutanix.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The current text corresponds to an earlier, simpler version of this
function and it does not explain how it works now.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <bb5bd06f07c5a05b0818611de0d06ec5b66c8df3.1599150873.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In the past, when a new cluster was allocated the l2meta structure was
a variable in the stack so it was necessary to have a way to tell
whether it had been initialized and contained valid data or not. The
nb_clusters field was used for this purpose. Since commit f50f88b9fe
this is no longer the case, l2meta (nowadays a pointer to a list) is
only allocated when needed and nb_clusters is guaranteed to be > 0 so
this check is unnecessary.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <ab0b67c29c7ba26e598db35f12aa5ab5982539c1.1599150873.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When a write request needs to allocate new clusters (or change the L2
bitmap of existing ones) a QCowL2Meta structure is created so the L2
metadata can be later updated and any copy-on-write can be performed
if necessary.
A write request can span a region consisting of an arbitrary
combination of previously unallocated and allocated clusters, and if
the unallocated ones can be put contiguous to the existing ones then
QEMU will do so in order to minimize the number of write operations.
In practice this means that a write request has not just one but a
number of QCowL2Meta structures. All of them are added to the
cluster_allocs list that is stored in BDRVQcow2State and is used to
detect overlapping requests. After the write request finishes all its
associated QCowL2Meta are removed from that list. calculate_l2_meta()
takes care of creating and putting those structures in the list, and
qcow2_handle_l2meta() takes care of removing them.
The problem is that the error path in handle_alloc() also tries to
remove an item in that list, a remnant from the time when this was
handled there (that code would not even be correct anymore because
it only removes one struct and not all the ones from the same write
request).
This can trigger a double removal of the same item from the list,
causing a crash. This is not easy to reproduce in practice because
it requires that do_alloc_cluster_offset() fails after a successful
previous allocation during the same write request, but it can be
reproduced with the included test case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <3440a1c4d53c4fe48312b478c96accb338cbef7c.1599150873.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch replaces instances of sizeof(uint64_t) in the qcow2 driver
with macros that indicate what those sizes are actually referring to.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200828110828.13833-1-berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we remove the child with the highest index from the quorum,
decrement s->next_child_index. This way we get stable children
names as long as we only remove the last child.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Fixes: https://bugs.launchpad.net/bugs/1881231
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <5d5f930424c1c770754041aa8ad6421dc4e2b58e.1596536719.git.lukasstraub2@web.de>
Signed-off-by: Max Reitz <mreitz@redhat.com>
- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory
-----BEGIN PGP SIGNATURE-----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=gaaW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory
# gpg: Signature made Thu 10 Sep 2020 10:11:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (65 commits)
block/qcow2-cluster: Add missing "fallthrough" annotation
block/nvme: Pair doorbell registers
block/nvme: Use generic NvmeBar structure
block/nvme: Group controller registers in NVMeRegs structure
file-win32: Fix "locking" option
iotests: Allow running from different directory
iotests: Test committing to overridden backing
iotests: Add test for commit in sub directory
iotests: Add filter mirror test cases
iotests: Add filter commit test cases
iotests: Let complete_and_wait() work with commit
iotests: Test that qcow2's data-file is flushed
block: Leave BDS.backing_{file,format} constant
block: Inline bdrv_co_block_status_from_*()
blockdev: Fix active commit choice
block: Drop backing_bs()
qemu-img: Use child access functions
nbd: Use CAF when looking for dirty bitmap
commit: Deal with filters
backup: Deal with filters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When compiling with -Werror=implicit-fallthrough, the compiler currently
complains:
../../devel/qemu/block/qcow2-cluster.c: In function ‘cluster_needs_new_alloc’:
../../devel/qemu/block/qcow2-cluster.c:1320:12: error: this statement may fall
through [-Werror=implicit-fallthrough=]
if (l2_entry & QCOW_OFLAG_COPIED) {
^
../../devel/qemu/block/qcow2-cluster.c:1323:5: note: here
case QCOW2_CLUSTER_UNALLOCATED:
^~~~
It's quite obvious that the fallthrough is intended here, so let's add
a comment to silence the compiler warning.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200908070028.193298-1-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For each queue doorbell registers are paired as:
- Submission Queue Tail Doorbell
- Completion Queue Head Doorbell
Reflect that in the NVMeRegs structure, and adapt
nvme_create_queue_pair() accordingly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200904124130.583838-4-philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3c507adcd ("NVMe: Initial commit for new storage interface")
introduced the NvmeBar structure. Unfortunately in commit bdd6a90a9e
("block: Add VFIO based NVMe driver") we duplicated it.
Apparently in commit a3d9a352d4 ("block: Move NVMe constants to
a separate header") we tried to unify headers but forgot to remove
the structure declared in the block/nvme.c source file.
Do it now, and remove the structure size check which is redundant
with the header check added in commit 74e18435c0 ("hw/block/nvme:
Align I/O BAR to 4 KiB").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200904124130.583838-3-philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to use the NvmeBar structure from "block/nvme.h" in the
next commit. As a preliminary step, group all the NVMe controller
registers in the 'ctrl' field, keeping the doorbells registers
out of it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200904124130.583838-2-philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The intended behaviour was that locking=off/auto work and have no
effect (to remain compatible with file-posix), whereas locking=on would
return an error. Unfortunately, the code forgot to remove "locking" from
the options QDict, so any attempt to use the option would fail.
Replace the option parsing code for "locking" with something that is
part of the raw_runtime_opts QemuOptsList (so it is properly removed
from the QDict) and looks more like file-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200907092739.9988-1-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracked down with the help of scripts/cleanup-trace-events.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Parts of the block layer treat BDS.backing_file as if it were whatever
the image header says (i.e., if it is a relative path, it is relative to
the overlay), other parts treat it like a cache for
bs->backing->bs->filename (relative paths are relative to the CWD).
Considering bs->backing->bs->filename exists, let us make it mean the
former.
Among other things, this now allows the user to specify a base when
using qemu-img to commit an image file in a directory that is not the
CWD (assuming, everything uses relative filenames).
Before this patch:
$ ./qemu-img create -f qcow2 foo/bot.qcow2 1M
$ ./qemu-img create -f qcow2 -b bot.qcow2 foo/mid.qcow2
$ ./qemu-img create -f qcow2 -b mid.qcow2 foo/top.qcow2
$ ./qemu-img commit -b mid.qcow2 foo/top.qcow2
qemu-img: Did not find 'mid.qcow2' in the backing chain of 'foo/top.qcow2'
$ ./qemu-img commit -b foo/mid.qcow2 foo/top.qcow2
qemu-img: Did not find 'foo/mid.qcow2' in the backing chain of 'foo/top.qcow2'
$ ./qemu-img commit -b $PWD/foo/mid.qcow2 foo/top.qcow2
qemu-img: Did not find '[...]/foo/mid.qcow2' in the backing chain of 'foo/top.qcow2'
After this patch:
$ ./qemu-img commit -b mid.qcow2 foo/top.qcow2
Image committed.
$ ./qemu-img commit -b foo/mid.qcow2 foo/top.qcow2
qemu-img: Did not find 'foo/mid.qcow2' in the backing chain of 'foo/top.qcow2'
$ ./qemu-img commit -b $PWD/foo/mid.qcow2 foo/top.qcow2
Image committed.
With this change, bdrv_find_backing_image() must look at whether the
user has overridden a BDS's backing file. If so, it can no longer use
bs->backing_file, but must instead compare the given filename against
the backing node's filename directly.
Note that this changes the QAPI output for a node's backing_file. We
had very inconsistent output there (sometimes what the image header
said, sometimes the actual filename of the backing image). This
inconsistent output was effectively useless, so we have to decide one
way or the other. Considering that bs->backing_file usually at runtime
contained the path to the image relative to qemu's CWD (or absolute),
this patch changes QAPI's backing_file to always report the
bs->backing->bs->filename from now on. If you want to receive the image
header information, you have to refer to full-backing-filename.
This necessitates a change to iotest 228. The interesting information
it really wanted is the image header, and it can get that now, but it
has to use full-backing-filename instead of backing_file. Because of
this patch's changes to bs->backing_file's behavior, we also need some
reference output changes.
Along with the changes to bs->backing_file, stop updating
BDS.backing_format in bdrv_backing_attach() as well. This way,
ImageInfo's backing-filename and backing-filename-format fields will
represent what the image header says and nothing else.
iotest 245 changes in behavior: With the backing node no longer
overriding the parent node's backing_file string, you can now omit the
@backing option when reopening a node with neither a default nor a
current backing file even if it used to have a backing node at some
point.
273 also changes: The base image is opened without a format layer, so
ImageInfo.backing-filename-format used to report "file" for the base
image's overlay after blockdev-snapshot. However, the image header
never says "file" anywhere, so it now reports $IMGFMT.
Signed-off-by: Max Reitz <mreitz@redhat.com>
With bdrv_filter_bs(), we can easily handle this default filter behavior
in bdrv_co_block_status().
blkdebug wants to have an additional assertion, so it keeps its own
implementation, except bdrv_co_block_status_from_file() needs to be
inlined there.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
This includes some permission limiting (for example, we only need to
take the RESIZE permission if the base is smaller than the top).
Signed-off-by: Max Reitz <mreitz@redhat.com>
This includes some permission limiting (for example, we only need to
take the RESIZE permission for active commits where the base is smaller
than the top).
base_overlay is introduced so we can query bdrv_is_allocated_above() on
it - we cannot do that with base itself, because a filter's block_status
is the same as its child node, so if there are filters on base,
bdrv_is_allocated_above() on base would return information including
base.
Use this opportunity to rename qmp_drive_mirror()'s "source" BDS to
"target_backing_bs", because that is what it really refers to.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
query-block, query-named-block-nodes, and query-blockstats now return
any filtered child under "backing", not just bs->backing or COW
children. This is so that filters do not interrupt the reported backing
chain. This changes the output for iotest 184, as the throttled node
now appears as a backing child.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
It makes no sense to report the block stats of a purely metadata-storing
child in query-blockstats. So if the primary child does not have any
data, try to find a unique data-storing child.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
It is trivial, so we might as well do it.
Remove _filter_actual_image_size from iotest 184, so we get to see the
result in its reference output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the top node's driver does not provide snapshot functionality and we
want to fall back to a node down the chain, we need to snapshot all
non-COW children. For simplicity's sake, just do not fall back if there
is more than one such child. Furthermore, we really only can fall back
to bs->file and bs->backing, because bdrv_snapshot_goto() has to modify
the child link (notably, set it to NULL).
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
If a node whose driver does not provide VM state functions has a
metadata child, the VM state should probably go there; if it is a
filter, the VM state should probably go there. It follows that we
should generally go down to the primary child.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Instead of looking at just bs->file and bs->backing, we should look at
all children that could end up receiving forwarded requests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Before HEAD^, we needed this because bdrv_co_flush() by itself would
only flush bs->file. With HEAD^, bdrv_co_flush() will flush all
children on which a WRITE or WRITE_UNCHANGED permission has been taken.
Thus, vmdk no longer needs to do it itself.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
If the driver does not support .bdrv_co_flush() so bdrv_co_flush()
itself has to flush the children of the given node, it should not flush
just bs->file->bs, but in fact all children that might have been written
to (judging from the permissions taken on them).
This is a bug fix for qcow2 images with an external data file, as they
so far did not flush that data_file node.
In any case, the BLKDBG_EVENT() should be emitted on the primary child,
because that is where a blkdebug node would be if there is any.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
The condition modified here is not about potentially filtered children,
but only about COW sources (i.e. traditional backing files).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Because of the (not so recent anymore) changes that make the stream job
independent of the base node and instead track the node above it, we
have to split that "bottom" node into two cases: The bottom COW node,
and the node directly above the base node (which may be an R/W filter
or the bottom COW node).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Places that use patterns like
if (bs->drv->is_filter && bs->file) {
... something about bs->file->bs ...
}
should be
BlockDriverState *filtered = bdrv_filter_bs(bs);
if (filtered) {
... something about @filtered ...
}
instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
