The field is marked as "the offset in the file (in clusters)", but it
was being used like this
`cluster_size*(nums)+mapping->info.file.offset`, which is incorrect.
Signed-off-by: Amjad Alsharafi <amjadsharafi10@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <72f19a7903886dda1aa78bcae0e17702ee939262.1721470238.git.amjadsharafi10@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 21b25a0e46)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Before this commit, the behavior when calling `commit_one_file` for
example with `offset=0x2000` (second cluster), what will happen is that
we won't fetch the next cluster from the fat, and instead use the first
cluster for the read operation.
This is due to off-by-one error here, where `i=0x2000 !< offset=0x2000`,
thus not fetching the next cluster.
Signed-off-by: Amjad Alsharafi <amjadsharafi10@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <b97c1e1f1bc2f776061ae914f95d799d124fcd73.1721470238.git.amjadsharafi10@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b881cf00c9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We neglected to clear the @data_count index on ADMA error,
allowing to trigger assertion in sdhci_read_dataport() or
sdhci_write_dataport().
Cc: qemu-stable@nongnu.org
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2455
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240730092138.32443-4-philmd@linaro.org>
(cherry picked from commit ed5a159c3d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Patch 06b1297017 ("virtio-net: fix network stall under load")
added double-check to test whether the available buffer size
can satisfy the request or not, in case the guest has added
some buffers to the avail ring simultaneously after the first
check. It will be lucky if the available buffer size becomes
okay after the double-check, then the host can send the packet
to the guest. If the buffer size still can't satisfy the request,
even if the guest has added some buffers, viritio-net would
stall at the host side forever.
The patch enables notification and checks whether the guest has
added some buffers since last check of available buffers when
the available buffers are insufficient. If no buffer is added,
return false, else recheck the available buffers in the loop.
If the available buffers are sufficient, disable notification
and return true.
Changes:
1. Change the return type of virtqueue_get_avail_bytes() from void
to int, it returns an opaque that represents the shadow_avail_idx
of the virtqueue on success, else -1 on error.
2. Add a new API: virtio_queue_enable_notification_and_check(),
it takes an opaque as input arg which is returned from
virtqueue_get_avail_bytes(). It enables notification firstly,
then checks whether the guest has added some buffers since
last check of available buffers or not by virtio_queue_poll(),
return ture if yes.
The patch also reverts patch "06b12970174".
The case below can reproduce the stall.
Guest 0
+--------+
| iperf |
---------------> | server |
Host | +--------+
+--------+ | ...
| iperf |----
| client |---- Guest n
+--------+ | +--------+
| | iperf |
---------------> | server |
+--------+
Boot many guests from qemu with virtio network:
qemu ... -netdev tap,id=net_x \
-device virtio-net-pci-non-transitional,\
iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x
Each guest acts as iperf server with commands below:
iperf3 -s -D -i 10 -p 8001
iperf3 -s -D -i 10 -p 8002
The host as iperf client:
iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000
iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000
After some time, the host loses connection to the guest,
the guest can send packet to the host, but can't receive
packet from the host.
It's more likely to happen if SWIOTLB is enabled in the guest,
allocating and freeing bounce buffer takes some CPU ticks,
copying from/to bounce buffer takes more CPU ticks, compared
with that there is no bounce buffer in the guest.
Once the rate of producing packets from the host approximates
the rate of receiveing packets in the guest, the guest would
loop in NAPI.
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
| need kick the host?
| NAPI continues
v
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
v
... ...
On the other hand, the host fetches free buf from avail
ring, if the buf in the avail ring is not enough, the
host notifies the guest the event by writing the avail
idx read from avail ring to the event idx of used ring,
then the host goes to sleep, waiting for the kick signal
from the guest.
Once the guest finds the host is waiting for kick singal
(in virtqueue_kick_prepare_split()), it kicks the host.
The host may stall forever at the sequences below:
Host Guest
------------ -----------
fetch buf, send packet receive packet ---
... ... |
fetch buf, send packet add buf |
... add buf virtnet_poll
buf not enough avail idx-> add buf |
read avail idx add buf |
add buf ---
receive packet ---
write event idx ... |
wait for kick add buf virtnet_poll
... |
---
no more packet, exit NAPI
In the first loop of NAPI above, indicated in the range of
virtnet_poll above, the host is sending packets while the
guest is receiving packets and adding buffers.
step 1: The buf is not enough, for example, a big packet
needs 5 buf, but the available buf count is 3.
The host read current avail idx.
step 2: The guest adds some buf, then checks whether the
host is waiting for kick signal, not at this time.
The used ring is not empty, the guest continues
the second loop of NAPI.
step 3: The host writes the avail idx read from avail
ring to used ring as event idx via
virtio_queue_set_notification(q->rx_vq, 1).
step 4: At the end of the second loop of NAPI, recheck
whether kick is needed, as the event idx in the
used ring written by the host is beyound the
range of kick condition, the guest will not
send kick signal to the host.
Fixes: 06b1297017 ("virtio-net: fix network stall under load")
Cc: qemu-stable@nongnu.org
Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit f937309fbd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in include/hw/virtio/virtio.h)
Ensure the queue index points to a valid queue when software RSS
enabled. The new calculation matches with the behavior of Linux's TAP
device with the RSS eBPF program.
Fixes: 4474e37a5b ("virtio-net: implement RX RSS processing")
Reported-by: Zhibin Hu <huzhibin5@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit f1595ceb9a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: CVE-2024-6505
The FMOPA (widening) SME instruction takes pairs of half-precision
floating point values, widens them to single-precision, does a
two-way dot product and accumulates the results into a
single-precision destination. We don't quite correctly handle the
FPCR bits FZ and FZ16 which control flushing of denormal inputs and
outputs. This is because at the moment we pass a single float_status
value to the helper function, which then uses that configuration for
all the fp operations it does. However, because the inputs to this
operation are float16 and the outputs are float32 we need to use the
fp_status_f16 for the float16 input widening but the normal fp_status
for everything else. Otherwise we will apply the flushing control
FPCR.FZ16 to the 32-bit output rather than the FPCR.FZ control, and
incorrectly flush a denormal output to zero when we should not (or
vice-versa).
(In commit 207d30b5fd we tried to fix the FZ handling but
didn't get it right, switching from "use FPCR.FZ for everything" to
"use FPCR.FZ16 for everything".)
(Mjt: it is commit d5373d7bdb in stable-7.2)
Pass the CPU env to the sme_fmopa_h helper instead of an fp_status
pointer, and have the helper pass an extra fp_status into the
f16_dotadd() function so that we can use the right status for the
right parts of this operation.
Cc: qemu-stable@nongnu.org
Fixes: 207d30b5fd ("target/arm: Use FPST_F16 for SME FMOPA (widening)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2373
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 55f9f4ee01)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: s/tcg_env/cpu_env/ due to missingv
8.1.0-1189-gad75a51e84af "tcg: Rename cpu_env to tcg_env")
In amdvi_update_iotlb() we will only put a new entry in the hash
table if to_cache.perm is not IOMMU_NONE. However we allocate the
memory for the new AMDVIIOTLBEntry and for the hash table key
regardless. This means that in the IOMMU_NONE case we will leak the
memory we alloacted.
Move the allocations into the if() to the point where we know we're
going to add the item to the hash table.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2452
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240731170019.3590563-1-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9a45b07616)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In newer versions of Sphinx the env.doc2path() API is going to change
to return a Path object rather than a str. This was originally visible
in Sphinx 8.0.0rc1, but has been rolled back for the final 8.0.0
release. However it will probably emit a deprecation warning and is
likely to change for good in 9.0:
https://github.com/sphinx-doc/sphinx/issues/12686
Our use in depfile.py assumes a str, and if it is passed a Path
it will fall over:
Handler <function write_depfile at 0x77a1775ff560> for event 'build-finished' threw an exception (exception: unsupported operand type(s) for +: 'PosixPath' and 'str')
Wrapping the env.doc2path() call in str() will coerce a Path object
to the str we expect, and have no effect in older Sphinx versions
that do return a str.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2458
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240729120533.2486427-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 48e5b5f994)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When determining the current vector length, the SMCR_EL2.LEN and
SVCR_EL2.LEN settings should only be considered if EL2 is enabled
(compare the pseudocode CurrentSVL and CurrentNSVL which call
EL2Enabled()).
We were checking against ARM_FEATURE_EL2 rather than calling
arm_is_el2_enabled(), which meant that we would look at
SMCR_EL2/SVCR_EL2 when in Secure EL1 or Secure EL0 even if Secure EL2
was not enabled.
Use the correct check in sve_vqm1_for_el_sm().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-5-peter.maydell@linaro.org
(cherry picked from commit f573ac059e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function tszimm_esz() returns a shift amount, or possibly -1 in
certain cases that correspond to unallocated encodings in the
instruction set. We catch these later in the trans_ functions
(generally with an "a-esz < 0" check), but before we do the
decodetree-generated code will also call tszimm_shr() or tszimm_sl(),
which will use the tszimm_esz() return value as a shift count without
checking that it is not negative, which is undefined behaviour.
Avoid the UB by checking the return value in tszimm_shr() and
tszimm_shl().
Cc: qemu-stable@nongnu.org
Resolves: Coverity CID 1547617, 1547694
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-4-peter.maydell@linaro.org
(cherry picked from commit 76916dfa89)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The UMOPA/UMOPS instructions are supposed to multiply unsigned 8 or
16 bit elements and accumulate the products into a 64-bit element.
In the Arm ARM pseudocode, this is done with the usual
infinite-precision signed arithmetic. However our implementation
doesn't quite get it right, because in the DEF_IMOP_64() macro we do:
sum += (NTYPE)(n >> 0) * (MTYPE)(m >> 0);
where NTYPE and MTYPE are uint16_t or int16_t. In the uint16_t case,
the C usual arithmetic conversions mean the values are converted to
"int" type and the multiply is done as a 32-bit multiply. This means
that if the inputs are, for example, 0xffff and 0xffff then the
result is 0xFFFE0001 as an int, which is then promoted to uint64_t
for the accumulation into sum; this promotion incorrectly sign
extends the multiply.
Avoid the incorrect sign extension by casting to int64_t before
the multiply, so we do the multiply as 64-bit signed arithmetic,
which is a type large enough that the multiply can never
overflow into the sign bit.
(The equivalent 8-bit operations in DEF_IMOP_32() are fine, because
the 8-bit multiplies can never overflow into the sign bit of a
32-bit integer.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2372
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-3-peter.maydell@linaro.org
(cherry picked from commit ea3f5a90f0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For an instruction which accesses a 128-bit element tile when
the SVL is also 128 (for example MOV z0.Q, p0/M, ZA0H.Q[w0,0]),
we will assert in get_tile_rowcol():
qemu-system-aarch64: ../../tcg/tcg-op.c:926: tcg_gen_deposit_z_i32: Assertion `len > 0' failed.
This happens because we calculate
len = ctz32(streaming_vec_reg_size(s)) - esz;$
but if the SVL and the element size are the same len is 0, and
the deposit operation asserts.
In this case the ZA storage contains exactly one 128 bit
element ZA tile, and the horizontal or vertical slice is just
that tile. This means that regardless of the index value in
the Ws register, we always access that tile. (In pseudocode terms,
we calculate (index + offset) MOD 1, which is 0.)
Special case the len == 0 case to avoid hitting the assertion
in tcg_gen_deposit_z_i32().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-2-peter.maydell@linaro.org
(cherry picked from commit 56f1c0db92)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The documentation of the "Set palette" mailbox property at
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface#set-palette
says it has the form:
Length: 24..1032
Value:
u32: offset: first palette index to set (0-255)
u32: length: number of palette entries to set (1-256)
u32...: RGBA palette values (offset to offset+length-1)
We get this wrong in a couple of ways:
* we aren't checking the offset and length are in range, so the guest
can make us spin for a long time by providing a large length
* the bounds check on our loop is wrong: we should iterate through
'length' palette entries, not 'length - offset' entries
Fix the loop to implement the bounds checks and get the loop
condition right. In the process, make the variables local to
this switch case, rather than function-global, so it's clearer
what type they are when reading the code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-2-peter.maydell@linaro.org
(cherry picked from commit 0892fffc2a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix due to lack of
v9.0.0-1812-g5d5f1b60916a "hw/misc: Implement mailbox properties for customer OTP and device specific private keys"
v8.0.0-1924-g251918266666 "hw/misc/bcm2835_property: Use 'raspberrypi-fw-defs.h' definitions"
also remove now-unused local `n' variable which gets removed in the next change in this file,
v9.0.0-2720-g32f1c201eedf "hw/misc/bcm2835_property: Avoid overflow in OTP access properties")
When a bare-metal application on the raspi3 board reads the
AUX_MU_STAT_REG MMIO register while the device's buffer is
at full receive FIFO capacity
(i.e. `s->read_count == BCM2835_AUX_RX_FIFO_LEN`) the
assertion `assert(s->read_count < BCM2835_AUX_RX_FIFO_LEN)`
fails.
Reported-by: Cryptjar <cryptjar@junk.studio>
Suggested-by: Cryptjar <cryptjar@junk.studio>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/459
Signed-off-by: Frederik van Hövell <frederik@fvhovell.nl>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 546d574b11)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using int32_t meant that the address was sign-extended to uint64_t
when passing to translator_ld*, triggering an assert.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2453
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 83340193b9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The unrealize functions of the various vhost-user devices are
calling the corresponding vhost_*_set_status() functions with a
status of 0 to shut down the device correctly.
Now these vhost_*_set_status() functions all follow this scheme:
bool should_start = virtio_device_should_start(vdev, status);
if (vhost_dev_is_started(&vvc->vhost_dev) == should_start) {
return;
}
if (should_start) {
/* ... do the initialization stuff ... */
} else {
/* ... do the cleanup stuff ... */
}
The problem here is virtio_device_should_start(vdev, 0) currently
always returns "true" since it internally only looks at vdev->started
instead of looking at the "status" parameter. Thus once the device
got started once, virtio_device_should_start() always returns true
and thus the vhost_*_set_status() functions return early, without
ever doing any clean-up when being called with status == 0. This
causes e.g. problems when trying to hot-plug and hot-unplug a vhost
user devices multiple times since the de-initialization step is
completely skipped during the unplug operation.
This bug has been introduced in commit 9f6bcfd99f ("hw/virtio: move
vm_running check to virtio_device_started") which replaced
should_start = status & VIRTIO_CONFIG_S_DRIVER_OK;
with
should_start = virtio_device_started(vdev, status);
which later got replaced by virtio_device_should_start(). This blocked
the possibility to set should_start to false in case the status flag
VIRTIO_CONFIG_S_DRIVER_OK was not set.
Fix it by adjusting the virtio_device_should_start() function to
only consider the status flag instead of vdev->started. Since this
function is only used in the various vhost_*_set_status() functions
for exactly the same purpose, it should be fine to fix it in this
central place there without any risk to change the behavior of other
code.
Fixes: 9f6bcfd99f ("hw/virtio: move vm_running check to virtio_device_started")
Buglink: https://issues.redhat.com/browse/RHEL-40708
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240618121958.88673-1-thuth@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d72479b117)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
aio_context_set_thread_pool_params() takes two int64_t arguments to
set the minimum and maximum number of threads in the pool. We do
some bounds checking on these, but we don't catch the case where the
inputs are negative. This means that later in the function when we
assign these inputs to the AioContext::thread_pool_min and
::thread_pool_max fields, which are of type int, the values might
overflow the smaller type.
A negative number of threads is meaningless, so make
aio_context_set_thread_pool_params() return an error if either min or
max are negative.
Resolves: Coverity CID 1547605
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723150927.1396456-1-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 851495571d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Loongson IPI is only available in little-endian,
so use that to access the guest memory (in case
we run on a big-endian host).
Cc: qemu-stable@nongnu.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Fixes: f6783e3438 ("hw/loongarch: Add LoongArch ipi interrupt support")
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240718133312.10324-3-philmd@linaro.org>
(cherry picked from commit 2465c89fb9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixups for 7.2, for lack of:
v9.0.0-583-g91d0b151de4c "hw/intc/loongson_ipi: Implement IOCSR address space for MIPS"
v9.0.0-582-gb4a12dfc2132 "hw/intc/loongarch_ipi: Rename as loongson_ipi"
v8.2.0-545-gfdd6ee0b7653 "hw/intc/loongarch_ipi: Use MemTxAttrs interface for ipi ops")
If I use `-serial stdio` on Windows, after QEMU exits, the terminal
could not handle arrow keys and tab any more. Because stdio backend
on Windows sets console mode to virtual terminal input when starts,
but does not restore the old mode when finalize.
This small patch saves the old console mode and set it back.
Signed-off-by: Ziming Song <s.ziming@hotmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <ME3P282MB25488BE7C39BF0C35CD0DA5D8CA82@ME3P282MB2548.AUSP282.PROD.OUTLOOK.COM>
(cherry picked from commit 903cc9e117)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
sgx_epc_get_section assumes a PC platform is in use:
bool sgx_epc_get_section(int section_nr, uint64_t *addr, uint64_t *size)
{
PCMachineState *pcms = PC_MACHINE(qdev_get_machine());
However, sgx_epc_get_section is called by CPUID regardless of whether
SGX state has been initialized or which platform is in use. Check
whether the machine has the right QOM class and if not behave as if
there are no EPC sections.
Fixes: 1dec2e1f19 ("i386: Update SGX CPUID info according to hardware/KVM/user input", 2021-09-30)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2142
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 13be929aff)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The constant must be unsigned, otherwise the two's complement
overrides the other fields when a PASID is present.
Fixes: 1b2b12376c ("intel-iommu: PASID support")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-Id: <20240709142557.317271-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a3c8d7e385)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix)
QEMU crashes (Segmentation fault) when getting cxl-fmw property via
qmp:
(QEMU) qom-get path=machine property=cxl-fmw
This issue is caused by accessing wrong callback (opaque) type in
machine_get_cfmw().
cxl_machine_init() sets the callback as `CXLState *` type but
machine_get_cfmw() treats the callback as
`CXLFixedMemoryWindowOptionsList **`.
Fix this error by casting opaque to `CXLState *` type in
machine_get_cfmw().
Fixes: 03b39fcf64 ("hw/cxl: Make the CXL fixed memory window setup a machine parameter.")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Link: https://lore.kernel.org/r/20240704093404.1848132-1-zhao1.liu@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a207d5f87d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The allocated memory to hold LBA ranges leaks in the nvme_dsm function. This
happens because the allocated memory for iocb->range is not freed in all
error handling paths.
Fix this by adding a free to ensure that the allocated memory is properly freed.
ASAN log:
==3075137==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 480 byte(s) in 6 object(s) allocated from:
#0 0x55f1f8a0eddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7f531e0f6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x55f1faf1f091 in blk_aio_get block/block-backend.c:2583:12
#3 0x55f1f945c74b in nvme_dsm hw/nvme/ctrl.c:2609:30
#4 0x55f1f945831b in nvme_io_cmd hw/nvme/ctrl.c:4470:16
#5 0x55f1f94561b7 in nvme_process_sq hw/nvme/ctrl.c:7039:29
Cc: qemu-stable@nongnu.org
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit c510fe78f1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This operation has float16 inputs and thus must use
the FZ16 control not the FZ control.
Cc: qemu-stable@nongnu.org
Fixes: 3916841ac7 ("target/arm: Implement FMOPA, FMOPS (widening)")
Reported-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-3-richard.henderson@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2374
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 207d30b5fd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We made a copy above because the fp exception flags
are not propagated back to the FPST register, but
then failed to use the copy.
Cc: qemu-stable@nongnu.org
Fixes: 558e956c71 ("target/arm: Implement FMOPA, FMOPS (non-widening)")
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-2-richard.henderson@linaro.org
[rth: Split from a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 31d93fedf4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 8f9a9259d3 added ObjectType member @x-vfio-user-server with
feature unstable, but neglected to explain why it is unstable. Do
that now.
Fixes: 8f9a9259d3 (vfio-user: define vfio-user-server object)
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: John G Johnson <john.g.johnson@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240703095310.1242102-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Indentation fixed]
(cherry picked from commit 3becc93908)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: fix context and fix indentation for 7.2.x)
foo
qemu_chr_open_fd() sets stdout into non-blocking mode. Restore the old
fd flags on exit to avoid breaking unsuspecting applications that run on
the same terminal after qemu and don't expect to get EAGAIN.
While at at, also ensure term_exit is called once (at the moment it's
called both from char_stdio_finalize() and as the atexit() hook.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2423
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20240703190812.3459514-1-maxtram95@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a0124e333e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit d152cdd6f6 ("virtio: use virtio accessor to access packed event")
switched using of address_space_read_cached() to virito_lduw_phys_cached()
to access packed descriptor event.
When we used address_space_read_cached(), we needed to call
virtio_tswap16s() to handle the endianess of the field, but
virito_lduw_phys_cached() already handles it internally, so we no longer
need to call virtio_tswap16s() (as the commit had done for `off_wrap`,
but forgot for `flags`).
Fixes: d152cdd6f6 ("virtio: use virtio accessor to access packed event")
Cc: jasowang@redhat.com
Cc: qemu-stable@nongnu.org
Reported-by: Xoykie <xoykie@gmail.com>
Link: https://lore.kernel.org/qemu-devel/CAFU8RB_pjr77zMLsM0Unf9xPNxfr_--Tjr49F_eX32ZBc5o2zQ@mail.gmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240701075208.19634-1-sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7aa6492401)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When handling image filenames from legacy options such as -drive or from
tools, these filenames are parsed for protocol prefixes, including for
the json:{} pseudo-protocol.
This behaviour is intended for filenames that come directly from the
command line and for backing files, which may come from the image file
itself. Higher level management tools generally take care to verify that
untrusted images don't contain a bad (or any) backing file reference;
'qemu-img info' is a suitable tool for this.
However, for other files that can be referenced in images, such as
qcow2 data files or VMDK extents, the string from the image file is
usually not verified by management tools - and 'qemu-img info' wouldn't
be suitable because in contrast to backing files, it already opens these
other referenced files. So here the string should be interpreted as a
literal local filename. More complex configurations need to be specified
explicitly on the command line or in QMP.
This patch changes bdrv_open_inherit() so that it only parses filenames
if a new parameter parse_filename is true. It is set for the top level
in bdrv_open(), for the file child and for the backing file child. All
other callers pass false and disable filename parsing this way.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
(cherry picked from commit 7ead946998)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: backport patch to 7.2, without:
v8.0.0-2069-g8394c35ee148 "block: Fix AioContext locking in bdrv_open_child()"
v8.1.0-801-gafdaeb9ea06e "block: Mark bdrv_attach_child() GRAPH_WRLOCK"
v8.2.0-rc0-59-g6bc0bcc89f84 "block: Fix deadlocks in bdrv_graph_wrunlock()"
v8.2.0-132-g6bc30f194985 "graph-lock: remove AioContext locking"
v8.2.0-133-gb49f4755c7fa "block: remove AioContext locking")
We want to disable filename parsing for data files because it's too easy
to abuse in malicious image files. Make the test ready for the change by
passing the data file explicitly in command line options.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
(cherry picked from commit 7e1110664e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We want to disable filename parsing for data files because it's too easy
to abuse in malicious image files. Make the test ready for the change by
passing the data file explicitly in command line options.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
(cherry picked from commit 2eb42a728d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
One use case for 'qemu-img info' is verifying that untrusted images
don't reference an unwanted external file, be it as a backing file or an
external data file. To make sure that calling 'qemu-img info' can't
already have undesired side effects with a malicious image, just don't
open the data file at all with BDRV_O_NO_IO. If nothing ever tries to do
I/O, we don't need to have it open.
This changes the output of iotests case 061, which used 'qemu-img info'
to show that opening an image with an invalid data file fails. After
this patch, it succeeds. Replace this part of the test with a qemu-io
call, but keep the final 'qemu-img info' to show that the invalid data
file is correctly displayed in the output.
Fixes: CVE-2024-4467
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
(cherry picked from commit bd385a5298)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The inner loop, bounded by eltspersegment, must not be
larger than the outer loop, bounded by elements.
Cc: qemu-stable@nongnu.org
Fixes: 18fc240578 ("target/arm: Implement SVE fp complex multiply add (indexed)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2376
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 76bccf3cb9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When QEMU is started with:
-cpu host,host-cache-info=on,l3-cache=off \
-smp 2,sockets=1,dies=1,cores=1,threads=2
Guest can't acquire maximum number of addressable IDs for processor cores in
the physical package from CPUID[04H].
When creating a CPU topology of 1 core per package, host-cache-info only
uses the Host's addressable core IDs field (CPUID.04H.EAX[bits 31-26]),
resulting in a conflict (on the multicore Host) between the Guest core
topology information in this field and the Guest's actual cores number.
Fix it by removing the unnecessary condition to cover 1 core per package
case. This is safe because cores_per_pkg will not be 0 and will be at
least 1.
Fixes: d7caf13b5f ("x86: cpu: fixup number of addressable IDs for logical processors sharing cache")
Signed-off-by: Guixiong Wei <weiguixiong@bytedance.com>
Signed-off-by: Yipeng Yin <yinyipeng@bytedance.com>
Signed-off-by: Chuang Xu <xuchuangxclwt@bytedance.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240611032314.64076-1-xuchuangxclwt@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 903916f0a0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixup for 7.2 due to other changes in this area past 8.2)
This job is failing since weeks. Let's mark it as manual until
it gets fixed.
Message-Id: <82aa015a-ca94-49ce-beec-679cc175b726@redhat.com>
Acked-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f51f90c65e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
All we are really doing here is checking that TSAN builds compile and are
therefor a tool available to developers. The benchmarks are not
representative of QEMU's actual threading behaviour and they burn
precious CI time. Indeed switching to check-unit reveals many
unaddressed issues which have been logged at:
https://gitlab.com/qemu-project/qemu/-/issues/1496
So for now disable the make check and make this a build only
test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230228190653.1602033-8-alex.bennee@linaro.org>
(cherry picked from commit 7c7d369b33)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
RHEL 9 (and thus also the derivatives) have been available since two
years now, so according to QEMU's support policy, we can drop the active
support for the previous major version 8 now.
Another reason for doing this is that Centos Stream 8 will go EOL soon:
https://blog.centos.org/2023/04/end-dates-are-coming-for-centos-stream-8-and-centos-linux-7/
"After May 31, 2024, CentOS Stream 8 will be archived
and no further updates will be provided."
Thus upgrade our CentOS Stream container to major version 9 now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 641b1efe01)
(Mjt: numerous merge conflicts due to many changes in testing framework)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Python 3.6 is at end-of-life. Update the libvirt-ci module to a
version that supports overrides for targets and package mappings;
this way, QEMU can use the newer versions provided by CentOS 8 (Python
3.8) and OpenSUSE 15.3 (Python 3.9).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d639cf79783a1eba349b7705e0fb270fa76118a4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fedora 35 is EOL.
Update to upstream lcitool, that dropped f35 and added f37.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110132700.833690-7-marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-11-alex.bennee@linaro.org>
(cherry picked from commit 0054dc8bde)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Let's safe some CI minutes by merging these two jobs. We can now
also drop "--disable-capstone" since the capstone submodule has
been removed a while ago. We should rather test --disable-fdt now
to check a compilation without the "dtc" submodule (for this we
have to drop i386-softmmu from the target list unfortunately).
Additionally, the qtests with s390x and sh4 are not read for
"--without-default-devices" yet, so we can only test mips64 and
avr here now.
Message-Id: <20230130104446.1286773-5-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit e030d08c2f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Simplify the logic for two-part, 32-bit pc-relative addresses.
Rather than assume all such fit in int32_t, do some arithmetic
and assert a result, do some arithmetic first and then check
to see if the pieces are in range.
Cc: qemu-stable@nongnu.org
Fixes: dacc51720d ("tcg/loongarch64: Implement tcg_out_mov and tcg_out_movi")
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reported-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 521d7fb3eb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in tcg/loongarch64/tcg-target.c.inc)
Like TARGET_NR_setuid, TARGET_NR_setgroups should affect only the
calling thread, and not the entire process. Therefore, implement it
using a syscall, and not a libc call.
Cc: qemu-stable@nongnu.org
Fixes: 19b84f3c35 ("added setgroups and getgroups syscalls")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240614154710.1078766-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 54b2792102)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In case the display surface uses a shared buffer (i.e. uses vga vram
directly instead of a shadow) go unshare the buffer before clearing it.
This avoids vga memory corruption, which in turn fixes unblanking not
working properly with X11.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2067
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240605131444.797896-2-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit b1cf266c82)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reproducer from https://gitlab.com/qemu-project/qemu/-/issues/1451
creates small packet (1 segment, len = 10 == n->guest_hdr_len),
then destroys queue.
"if (n->host_hdr_len != n->guest_hdr_len)" is triggered, if body creates
zero length/zero segment packet as there is nothing after guest header.
qemu_sendv_packet_async() tries to send it.
slirp discards it because it is smaller than Ethernet header,
but returns 0 because tx hooks are supposed to return total length of data.
0 is propagated upwards and is interpreted as "packet has been sent"
which is terrible because queue is being destroyed, nobody is waiting for TX
to complete and assert it triggered.
Fix is discard such empty packets instead of sending them.
Length 1 packets will go via different codepath:
virtqueue_push(q->tx_vq, elem, 0);
virtio_notify(vdev, q->tx_vq);
g_free(elem);
and aren't problematic.
Signed-off-by: Alexey Dobriyan <adobriyan@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 2c3e4e2de6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The calculation of FrameTemp is done using the size indicated by mo_pushpop()
before being written back to EBP, but the final writeback to EBP is done using
the size indicated by mo_stacksize().
In the case where mo_pushpop() is MO_32 and mo_stacksize() is MO_16 then the
final writeback to EBP is done using MO_16 which can leave junk in the top
16-bits of EBP after executing ENTER.
Change the writeback of EBP to use the same size indicated by mo_pushpop() to
ensure that the full value is written back.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2198
Message-ID: <20240606095319.229650-5-mark.cave-ayland@ilande.co.uk>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3973615e7f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
description:
loongarch_cpu_dump_state() want to dump all loongarch cpu
state registers, but there is a tiny typographical error when
printing "PRCFG2".
Cc: qemu-stable@nongnu.org
Signed-off-by: lanyanzhi <lanyanzhi22b@ict.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240604073831.666690-1-lanyanzhi22b@ict.ac.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
(cherry picked from commit 78f932ea1f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
By default, SDL disables the screen saver which prevents the host from powering
down the screen even if the screen is locked. This results in draining the
battery needlessly when the host isn't connected to a wall charger. Fix that by
enabling the screen saver.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240512095945.1879-1-shentey@gmail.com>
(cherry picked from commit 2e701e6785)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
