Approach copied from gen_pcie_root_port.c
Previously the link defaulted to a maximum of 2.5GT/s and 1x. Enable setting
it's maximum values. The actual value after 'training' will depend on the
downstream device configuration.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
>From review of the Generic Ports support.
These properties had no description set so add one.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916174321.1843228-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From review of generic port introduction.
The value is handled as a uint32_t so store it in that type.
The value cannot in reality exceed MAX_NODES which is currently
128 but if the types are matched there is no need to rely on that
restriction.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916174237.1843213-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are very similar to the recently added Generic Initiators
but instead of representing an initiator of memory traffic they
represent an edge point beyond which may lie either targets or
initiators. Here we add these ports such that they may
be targets of hmat_lb records to describe the latency and
bandwidth from host side initiators to the port. A discoverable
mechanism such as UEFI CDAT read from CXL devices and switches
is used to discover the remainder of the path, and the OS can build
up full latency and bandwidth numbers as need for work and data
placement decisions.
Acked-by: Markus Armbruster <armbru@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916174122.1843197-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reduce the direct use of PCI internals inside ACPI table creation.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than relying on PCI internals, use the new acpi_property
to obtain the ACPI _UID values. These are still the same
as the PCI Bus numbers so no functional change.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable ACPI table creation for PCI Expander Bridges to be independent
of PCI internals. Note that the UID is currently the PCI bus number.
This is motivated by the forthcoming ACPI Generic Port SRAT entries
which can be made completely independent of PCI internals.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst ACPI SRAT Generic Initiator Afinity Structures are able to refer to
both PCI and ACPI Device Handles, the QEMU implementation only implements
the PCI Device Handle case. For now move the code into the existing
hw/acpi/pci.c file and header. If support for ACPI Device Handles is
added in the future, perhaps this will be moved again.
Also push the struct AcpiGenericInitiator down into the c file as not
used outside pci.c.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using a property allows us to hide the internal details of the PCI device
from the code to build a SRAT Generic Initiator Affinity Structure with
PCI Device Handle.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor noted that this function only builds one instance, so was rather
misleadingly named. Fix that.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than attempting to create a generic function with mess of the two
different device handle types, use a PCI handle specific variant. If the
ACPI handle form is needed then that can be introduced alongside this
with little duplicated code.
Drop the PCIDeviceHandle in favor of just passing the bus, devfn
and segment directly. devfn kept as a single byte because ARI means
that in this case it is just an 8 bit function number.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20240618142333.102be976@imammedo.users.ipa.redhat.com/
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Before making additional modification, tidy up this misleading indentation.
Reviewed-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ordering in ACPI specification [1] has bus number in the lowest byte.
As ACPI tables are little endian this is the reverse of the ordering
used by PCI_BUILD_BDF(). As a minimal fix split the QEMU BDF up
into bus and devfn and write them as single bytes in the correct
order.
[1] ACPI Spec 6.3, Table 5.80
Fixes: 0a5b5acdf2 ("hw/acpi: Implement the SRAT GI affinity structure")
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some editorial tweaks to the doc:
Add a ref link to Memory region description and Multiple Memory region
description.
Descriptions about memory regions are merged into one line.
Add extra type(64 bits) to Log description structure fields
Fix ’s to 's
Signed-off-by: luzhixing12345 <luzhixing12345@gmail.com>
Message-Id: <20240911060400.3472-1-luzhixing12345@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove dead code which always returns success, since PRCHK will have a
value of zero.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Link: https://lore.kernel.org/r/20241022222105.3609223-1-arun.kka@samsung.com
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the NPDGL and NPDAL fields to support large alignment and
granularities.
Signed-off-by: Ayush Mishra <ayush.m55@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Link: https://lore.kernel.org/r/20241001012833.3551820-1-ayush.m55@samsung.com
[k.jensen: renamed the enum values]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for the I/O Command Set Independent Namespace Data
Structure (CNS 8h and 1fh).
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Link: https://lore.kernel.org/r/20240925004407.3521406-1-arun.kka@samsung.com
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* Various fixes, improvements and additions for the functional test suite
* Restore the sh4eb target
* Fix the OpenBSD VM test
* Re-enable the pci-bridge device on s390x
* Minor clean-ups / fixes for the next-cube machine
-----BEGIN PGP SIGNATURE-----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=CTOw
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-11-04' of https://gitlab.com/thuth/qemu into staging
* Remove the redundant macOS-15 CI job
* Various fixes, improvements and additions for the functional test suite
* Restore the sh4eb target
* Fix the OpenBSD VM test
* Re-enable the pci-bridge device on s390x
* Minor clean-ups / fixes for the next-cube machine
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmcoyoQRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVwRg/+M8RWxOW5M2GmEfAj/e1IatLS2eXek6fE
# YOCPxvc5VK5rjXzcRKNqNKP53gBkF0PRho68b3IkBI6ylDOdzdRcDYsi8CSLWbG4
# O6heGJRzn9HyIS+UShAoqoj9l7lxODcZvEJK2ueiy/Hri/Zc4TpullLhSgAPKTgn
# Ln75nd+hWwS9e0df1BSOBax2iEU/2j1yuBVCcFgFHH8K39Wqrs6Xtyay9yPjYLUg
# pHNGObikrLF47KGI5yZ22/iVgwr5yhd3KzycjbxHVccCqZSsGl2xkCBwKNlIodRO
# RMhTzUhOMi/RSjvdSbM5d2Nh4aCJ5mNzzWSUklHdYWnrMOv6uECJ0h2o0ve5L4kT
# jtTGTcLe8a+JsDs+UxeVWqqlUf4w8Vv0DRky6D6ln25hcqrOveJE++o58FHFt/AX
# jEolRU5k2tMpOSMgE3wAi5BVCttpI3Idly/IC+rntMjQOTwdKPlgfcBIqQmXI6M8
# dM6oUf9WnIr/CAt7qG6QjCONjeBmuMlZV4+v7xdqFsJpwCTyo6k3LwoHx3pTC73z
# 6x0SmpeDoTzdw6B7O1HlLNllW7hd2/5GQ5qTH+E1pKAktkOf3MQeSD6qQEMjwH7T
# e7hNUV+APgtDqpnQ0xcTL5AwNAkDGKoKBmaIp0vlwGUET55fw5N0Wb6Oo9LOgeFl
# yqi5GxIuJu4=
# =CTOw
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 13:22:12 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-11-04' of https://gitlab.com/thuth/qemu:
tests/functional: Convert the OrangePi tests to the functional framework
tests/functional: Convert BananaPi tests to the functional framework
tests/functional: Convert the tcg_plugins test
next-cube: remove cpu parameter from next_scsi_init()
next-cube: fix up compilation when DEBUG_NEXT is enabled
hw/s390x: Re-enable the pci-bridge device on s390x
tests/functional: Fix the s390x and ppc64 tuxrun tests
tests/vm/openbsd: Remove the "Time appears wrong" workaround
tests/functional: Add a test for sh4eb
Revert "Remove the unused sh4eb target"
tests/functional: make cached asset files read-only
tests/functional: make tuxrun disk images writable
.gitlab-ci.d/cirrus: Remove the macos-15 job
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Please pull a single commit, which updates SeaBIOS-hppa
to version 17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZyfV0AAKCRD3ErUQojoP
X63XAP9sxLngebfWXdb9YI4+3N2xBpT772tQha3QYdejF0QvrAEAwpB8g8MFHHz3
QKZfvPERw2nBhjtpf+Dl9iexoKh8YQI=
=MjU+
-----END PGP SIGNATURE-----
Merge tag 'seabios-hppa-v17-pull-request' of https://github.com/hdeller/qemu-hppa into staging
SeaBIOS-hppa v17 pull request
Please pull a single commit, which updates SeaBIOS-hppa
to version 17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZyfV0AAKCRD3ErUQojoP
# X63XAP9sxLngebfWXdb9YI4+3N2xBpT772tQha3QYdejF0QvrAEAwpB8g8MFHHz3
# QKZfvPERw2nBhjtpf+Dl9iexoKh8YQI=
# =MjU+
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 03 Nov 2024 19:58:08 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'seabios-hppa-v17-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 17
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZyXbXgAKCRBAov/yOSY+
37a9BADZ7vI2idWNXdH+mLNDZNSOxfdKp6ggNgKS3S48Hi2zR72MEhwvR9dGlHDL
98agrbV7/jI9Z+0dLAxvlyl1MvXfnn2sXYgUuZp6IAaQzFBa11HBAK7UFh3sTA4A
gD4oPwl8AdJiFvDN6vNjS+dO0ls+j/YMaoLkAKLv15dlWtg4Rw==
=EZnr
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241102' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241102
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZyXbXgAKCRBAov/yOSY+
# 37a9BADZ7vI2idWNXdH+mLNDZNSOxfdKp6ggNgKS3S48Hi2zR72MEhwvR9dGlHDL
# 98agrbV7/jI9Z+0dLAxvlyl1MvXfnn2sXYgUuZp6IAaQzFBa11HBAK7UFh3sTA4A
# gD4oPwl8AdJiFvDN6vNjS+dO0ls+j/YMaoLkAKLv15dlWtg4Rw==
# =EZnr
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 02 Nov 2024 07:57:18 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241102' of https://gitlab.com/gaosong/qemu:
target/loongarch: Add steal time support on migration
hw/loongarch/boot: Use warn_report when no kernel filename
linux-headers: Update to Linux v6.12-rc5
linux-headers: loongarch: Add kvm_para.h
linux-headers: Add unistd_64.h
target/loongarch/kvm: Implement LoongArch PMU extension
target/loongarch: Implement lbt registers save/restore function
target/loongarch: Add loongson binary translation feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clarify how the parameter gets configured and how it is used when
servicing DMA mapping requests targeting indirect memory regions.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Message-Id: <20240910213512.843130-1-mnissler@rivosinc.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the OrangePi tests from tests/avocado/boot_linux_console.py into
a new file dedicated for OrangePi tests in the functional framework
and update the hash sums of the assets to sha256 along the way.
For the buildroot image and the Armbian image, we've got to switch to
a newer version since the old images have been removed from the server,
and the NetBSD image has been moved to the archive, so we need to update
this URL as well.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241029092440.25021-3-thuth@redhat.com>
Move the BananaPi tests from tests/avocado/boot_linux_console.py into
a new file dedicated for Banana Pi tests in the functional framework.
Update the hash sums of the assets to sha256 along the way and fix the
broken link for the buildroot image from storage.kernelci.org.
(Note: The test_arm_bpim2u_openwrt_22_03_3 test is currently broken
due to a regression in commit 4c2c047469 ("target/arm: Fix usage of MMU
indexes when EL3 is AArch32") - it works if that commit gets reverted)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241029092440.25021-2-thuth@redhat.com>
A straight forward conversion, only the usual changes were required
here (i.e. adjustment for asset downloading, machine selection).
Message-ID: <20241023051754.813412-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The parameter is not used.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241023085852.1061031-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These were accidentally introduced by my last series.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241023085852.1061031-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e779e5c05a ("hw/pci-bridge: Add a Kconfig switch for the
normal PCI bridge") added a config switch for the pci-bridge, so
that the device is not included in the s390x target anymore (since
the pci-bridge is not really useful on s390x).
However, it seems like libvirt is still adding pci-bridge devices
automatically to the guests' XML definitions (when adding a PCI
device to a non-zero PCI bus), so these guests are now broken due
to the missing pci-bridge in the QEMU binary.
To avoid disruption of the users, let's re-enable the pci-bridge
device on s390x for the time being.
Message-ID: <20241024130405.62134-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I forgot to add the tests to the meson.build file and looks
like I even managed to somehow mix up the hashsums in the
ppc64 test!
Message-ID: <20241023141919.930689-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Seems like the server now reports the right time again, so we have
to drop the workaround to get the installer working again.
Message-ID: <20241023072414.827732-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we are aware of binaries that are available for sh4eb,
we should make sure that there are no regressions with this
target and test it regularly in our CI.
Message-ID: <20241024082735.42324-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 73ceb12960.
The "r2d" machine can work in big endian mode, see:
https://lore.kernel.org/qemu-devel/d6755445-1060-48a8-82b6-2f392c21f9b9@landley.net/
So the reasoning for removing sh4eb was wrong.
Message-ID: <20241024082735.42324-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Rob Landley <rob@landley.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This ensures that if a functional test runs QEMU with a writable
disk pointing to a cached asset, an error will be reported, rather
than silently modifying the cache file.
As an example, tweaking test_sbsaref.py to set snapshot=off,
results in a clear error:
Command: ./build/qemu-system-aarch64 ...snip... -drive file=/var/home/berrange/.cache/qemu/download/44cdbae275ef1bb6dab1d5fbb59473d4f741e1c8ea8a80fd9e906b531d6ad461,format=raw,snapshot=off -cpu max,pauth=off
Output: qemu-system-aarch64: Could not open '/var/home/berrange/.cache/qemu/download/44cdbae275ef1bb6dab1d5fbb59473d4f741e1c8ea8a80fd9e906b531d6ad461': Permission denied
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241025092659.2312118-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The zstd command will preserve the input archive permissions on the
output file. So when we decompress the readonly cached image, the
resulting per-test run private disk image will also be readonly.
We need it to be writable, so make it so.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241025092659.2312118-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cirrus-CI stopped providing the possibility to run macOS 15 jobs.
Quoting https://cirrus-ci.org/guide/macOS/ :
"Cirrus CI Cloud only allows ghcr.io/cirruslabs/macos-runner:sonoma image ..."
If you still try to run a Sequoia image, it gets automatically "upgraded"
to Sonoma instead. So the macos-15 job in the QEMU CI now does not
make sense anymore, thus let's remove it.
Message-ID: <20241021124722.139348-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
v2:
- Patch "migration: Move cpu-throttle.c from system to migration",
fix build on MacOS, and subject spelling
NOTE: checkpatch.pl could report a false positive on this branch:
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#21:
{include/sysemu => migration}/cpu-throttle.h | 0
That's covered by "F: migration/" entry.
Changelog:
- Peter's cleanup patch on migrate_fd_cleanup()
- Peter's cleanup patch to introduce thread name macros
- Hanna's error path fix for vmstate subsection save()s
- Hyman's auto converge enhancement on background dirty sync
- Peter's additional tracepoints for save state entries
- Thomas's build fix for OpenBSD in dirtyrate.c
- Peter's deprecation of query-migrationthreads command
- Peter's cleanup/fixes from the "export misc.h" series
- Maciej's two small patches from multifd+vfio series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZyTbVRIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wan3wD+L4TVNDc34Hy4mvWu7u1lCOePX0GBdUEc
oEeBGblwbrcBAIR8d+5z9O5YcWH1coozG1aUC4qCtSHHk5TGbJk4/UUD
=XB5Q
-----END PGP SIGNATURE-----
Merge tag 'migration-20241030-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request for softfreeze
v2:
- Patch "migration: Move cpu-throttle.c from system to migration",
fix build on MacOS, and subject spelling
NOTE: checkpatch.pl could report a false positive on this branch:
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#21:
{include/sysemu => migration}/cpu-throttle.h | 0
That's covered by "F: migration/" entry.
Changelog:
- Peter's cleanup patch on migrate_fd_cleanup()
- Peter's cleanup patch to introduce thread name macros
- Hanna's error path fix for vmstate subsection save()s
- Hyman's auto converge enhancement on background dirty sync
- Peter's additional tracepoints for save state entries
- Thomas's build fix for OpenBSD in dirtyrate.c
- Peter's deprecation of query-migrationthreads command
- Peter's cleanup/fixes from the "export misc.h" series
- Maciej's two small patches from multifd+vfio series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZyTbVRIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wan3wD+L4TVNDc34Hy4mvWu7u1lCOePX0GBdUEc
# oEeBGblwbrcBAIR8d+5z9O5YcWH1coozG1aUC4qCtSHHk5TGbJk4/UUD
# =XB5Q
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Nov 2024 13:44:53 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20241030-pull-request' of https://gitlab.com/peterx/qemu:
migration/multifd: Zero p->flags before starting filling a packet
migration/ram: Add load start trace event
migration: Drop migration_is_idle()
migration: Drop migration_is_setup_or_active()
migration: Unexport ram_mig_init()
migration: Unexport dirty_bitmap_mig_init()
migration: Take migration object refcount earlier for threads
migration: Deprecate query-migrationthreads command
migration/dirtyrate: Silence warning about strcpy() on OpenBSD
tests/migration: Add case for periodic ramblock dirty sync
migration: Support periodic RAMBlock dirty bitmap sync
migration: Remove "rs" parameter in migration_bitmap_sync_precopy
migration: Move cpu-throttle.c from system to migration
migration: Stop CPU throttling conditionally
accel/tcg/icount-common: Remove the reference to the unused header file
migration: Ensure vmstate_save() sets errp
migration: Put thread names together with macros
migration: Cleanup migrate_fd_cleanup() on accessing to_dst_file
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-ga on a NetBSD -current VM terminates with a SIGSEGV upon receiving
'guest-set-time' command...
Core was generated by `qemu-ga'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000000000cd37a40 in ga_pipe_read_str (fd=fd@entry=0xffffff922a20, str=str@entry=0xffffff922a18)
at ../qga/commands-posix.c:88
88 *str[len] = '\0';
[Current thread is 1 (process 1112)]
(gdb) bt
#0 0x000000000cd37a40 in ga_pipe_read_str (fd=fd@entry=0xffffff922a20, str=str@entry=0xffffff922a18)
at ../qga/commands-posix.c:88
#1 0x000000000cd37b60 in ga_run_command (argv=argv@entry=0xffffff922a90,
action=action@entry=0xcda34b8 "set hardware clock to system time", errp=errp@entry=0xffffff922a70, in_str=0x0)
at ../qga/commands-posix.c:164
#2 0x000000000cd380c4 in qmp_guest_set_time (has_time=<optimized out>, time_ns=<optimized out>,
errp=errp@entry=0xffffff922ad0) at ../qga/commands-posix.c:304
#3 0x000000000cd253d8 in qmp_marshal_guest_set_time (args=<optimized out>, ret=<optimized out>, errp=0xffffff922b48)
at qga/qga-qapi-commands.c:193
#4 0x000000000cd4e71c in qmp_dispatch (cmds=cmds@entry=0xcdf5b18 <ga_commands>, request=request@entry=0xf3c711a4b000,
allow_oob=allow_oob@entry=false, cur_mon=cur_mon@entry=0x0) at ../qapi/qmp-dispatch.c:220
#5 0x000000000cd36524 in process_event (opaque=0xf3c711a79000, obj=0xf3c711a4b000, err=0x0) at ../qga/main.c:677
#6 0x000000000cd526f0 in json_message_process_token (lexer=lexer@entry=0xf3c711a79018, input=0xf3c712072480,
type=type@entry=JSON_RCURLY, x=28, y=1) at ../qobject/json-streamer.c:99
#7 0x000000000cd93860 in json_lexer_feed_char (lexer=lexer@entry=0xf3c711a79018, ch=125 '}', flush=flush@entry=false)
at ../qobject/json-lexer.c:313
#8 0x000000000cd93a00 in json_lexer_feed (lexer=lexer@entry=0xf3c711a79018,
buffer=buffer@entry=0xffffff922d10 "{\"execute\":\"guest-set-time\"}\n", size=<optimized out>)
at ../qobject/json-lexer.c:350
#9 0x000000000cd5290c in json_message_parser_feed (parser=parser@entry=0xf3c711a79000,
buffer=buffer@entry=0xffffff922d10 "{\"execute\":\"guest-set-time\"}\n", size=<optimized out>)
at ../qobject/json-streamer.c:121
#10 0x000000000cd361fc in channel_event_cb (condition=<optimized out>, data=0xf3c711a79000) at ../qga/main.c:703
#11 0x000000000cd3710c in ga_channel_client_event (channel=<optimized out>, condition=<optimized out>, data=0xf3c711b2d300)
at ../qga/channel-posix.c:94
#12 0x0000f3c7120d9bec in g_main_dispatch () from /usr/pkg/lib/libglib-2.0.so.0
#13 0x0000f3c7120dd25c in g_main_context_iterate_unlocked.constprop () from /usr/pkg/lib/libglib-2.0.so.0
#14 0x0000f3c7120ddbf0 in g_main_loop_run () from /usr/pkg/lib/libglib-2.0.so.0
#15 0x000000000cda00d8 in run_agent_once (s=0xf3c711a79000) at ../qga/main.c:1522
#16 run_agent (s=0xf3c711a79000) at ../qga/main.c:1559
#17 main (argc=<optimized out>, argv=<optimized out>) at ../qga/main.c:1671
(gdb)
The commandline options used on the host machine...
qemu-system-aarch64 \
-machine type=virt,pflash0=rom \
-m 8G \
-cpu host \
-smp 8 \
-accel hvf \
-device virtio-net-pci,netdev=unet \
-device virtio-blk-pci,drive=hd \
-drive file=netbsd.qcow2,if=none,id=hd \
-netdev user,id=unet,hostfwd=tcp::2223-:22 \
-object rng-random,filename=/dev/urandom,id=viornd0 \
-device virtio-rng-pci,rng=viornd0 \
-serial mon:stdio \
-display none \
-blockdev node-name=rom,driver=file,filename=/opt/homebrew/Cellar/qemu/9.0.2/share/qemu/edk2-aarch64-code.fd,read-only=true \
-chardev socket,path=/tmp/qga_netbsd.sock,server=on,wait=off,id=qga0 \
-device virtio-serial \
-device virtconsole,chardev=qga0,name=org.qemu.guest_agent.0
This patch rectifies the operator precedence while assigning the NUL
terminator.
Fixes: c3f32c13a3
Signed-off-by: Sunil Nimmagadda <sunil@nimmagadda.net>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/m15xppk9qg.fsf@nimmagadda.net
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reported by clang++, but not by g++.
../qga/vss-win32/provider.cpp:48:6: error: no previous prototype for function 'LockModule' [-Werror,-Wmissing-prototypes]
48 | void LockModule(BOOL lock)
| ^
../qga/vss-win32/provider.cpp:48:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
48 | void LockModule(BOOL lock)
| ^
| static
../qga/vss-win32/provider.cpp:531:13: error: no previous prototype for function 'DllMain' [-Werror,-Wmissing-prototypes]
531 | BOOL WINAPI DllMain(HINSTANCE hinstDll, DWORD dwReason, LPVOID lpReserved)
| ^
../qga/vss-win32/provider.cpp:531:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
531 | BOOL WINAPI DllMain(HINSTANCE hinstDll, DWORD dwReason, LPVOID lpReserved)
| ^
| static
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20241031040426.772604-7-pierrick.bouvier@linaro.org
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Commit e554e45b44 ("aspeed: Tune eMMC device properties to reflect
HW strapping") added support to boot from an eMMC device by setting
the boot properties of the eMMC device. This change made the
assumption that the device always has boot areas.
However, if the machine boots from the flash device (or -kernel) and
uses an eMMC device without boot areas, support would be broken. This
impacts the ast2600-evb machine which can choose to boot from flash or
eMMC using the "boot-emmc" machine option.
To provide some flexibility for Aspeed machine users to use different
flavors of eMMC devices (with or without boot areas), do not set the
eMMC device boot properties when the machine is not configured to boot
from eMMC. However, this approach makes another assumption about eMMC
devices, namely that eMMC devices from which the machine does not boot
do not have boot areas.
A preferable alternative would be to add support for user creatable
eMMC devices and define the device boot properties on the QEMU command
line :
-blockdev node-name=emmc0,driver=file,filename=mmc-ast2600-evb.raw \
-device emmc,bus=sdhci-bus.2,drive=emmc0,boot-partition-size=1048576,boot-config=8
This is a global change requiring more thinking. Nevertheless, in the
case of the ast2600-evb machine booting from an eMMC device and when
default devices are created, the proposed change still makes sense
since the device is required to have boot areas.
Cc: Jan Luebbe <jlu@pengutronix.de>
Fixes: e554e45b44 ("aspeed: Tune eMMC device properties to reflect
HW strapping")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a "if-statement" in aspeed_minibmc_machine_init function. If users add
"-nodefaults" in command line, the flash devices should be created by users
setting. Otherwise, the flash devices are created at machine init.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The size of SDHCI capabilities register is 64bits, so introduces new
Capabilities Register 2 for SD slot 0 (0x144) and SD slot1 (0x244).
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[ clg: Fixed code alignment ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of AST2600 description, interrupt status set by HW
and clear to "0" by software writing "1" on the specific bit.
Therefore, if firmware set the specific bit "1" in the interrupt status
register(0x34), the specific bit of "s->irq_sts" should be cleared 0.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Fixes: fadefada4d ("aspeed/timer: Add support for IRQ status register on the AST2600")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The RTC controller between AST2600 and AST2700 are identical. Add RTC model for
AST2700 RTC support. The RTC controller registers base address is start at
0x12C0_F000 and its alarm interrupt is connected to GICINT13.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
When calculating the index into the GIC's GPIO array for per-CPU
interrupts, we have to start with the number of SPIs. The code
currently hard-codes this to 'NUM_IRQS = 256'. However the number of
SPIs is set separately and implicitly by the value of
AST2700_MAX_IRQ, which is the number of SPIs plus 32 (since it is
what we set the GIC num-irq property to).
Define AST2700_MAX_IRQ as the total number of SPIs; this brings
AST2700 into line with AST2600, which defines AST2600_MAX_IRQ as the
number of SPIs not including the 32 internal interrupts. We can then
use AST2700_MAX_IRQ instead of the hardcoded 256.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use the private peripheral interrupt definitions from bsa.h instead
of defining them locally.
Note that bsa.h defines these values as INTID values, which are all
16 greater than the PPI values that we were previously using. So we
refactor the code to use INTID-based values to match that.
This is the same thing we did in commit d40ab068c0 for sbsa-ref.
It removes the "same constant, different values" confusion where this
board code and bsa.h both define an ARCH_GIC_MAINT_IRQ, and allows us
to use symbolic names for the timer interrupt IDs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The sd_bootpart_offset() function calculates the *runtime* offset which
changes as the guest switches between accessing the main user data area
and the boot partitions by writing to the EXT_CSD_PART_CONFIG_ACC_MASK
bits, so it shouldn't be used to calculate the main user data area size.
Instead, subtract the boot_part_size directly (twice, as there are two
identical boot partitions defined by the eMMC spec).
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Fixes: c8cb19876d ("hw/sd/sdcard: Support boot area in emmc image")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Enable AT24C with ASPEED in the KConfig because the boards build this
device.
Signed-off-by: Patrick Leis <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I've now well and truly moved on from ppc and qemu maintenance. I'm
occupied with other things and am pretty much just ignoring mails on these
topics I'm CCed on. Time to remove myself.
I'm still listed as a reviewer for Device Tree, I'll keep this for now,
since I do have some interest and it's lower volume.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Working on XIVE has been one of the most complex and fascinating
experiences for me. It's been a real journey, and now it's time for
IBM to take over and guide its future. I'm stepping back as the
maintainer of XIVE.
Cc: Michael Kowal <kowal@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Frédéric Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
