TLB should be flushed not only for pmpcfg csr changes, but also for
pmpaddr csr changes.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230517091519.34439-10-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently only the rule addr of the same index of pmpaddr is updated
when pmpaddr CSR is modified. However, the rule addr of next PMP entry
may also be affected if its A field is PMP_AMATCH_TOR. So we should
also update it in this case.
Write to pmpaddr CSR will not affect the rule nums, So we needn't update
call pmp_update_rule_nums() in pmpaddr_csr_write().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-9-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MMWP and MML bits may affect the allowed privs of PMP entries and the
default privs, both of which may change the allowed privs of exsited
TLB entries. So we need flush TLB when they are changed.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The addr and size parameters in pmp_hart_has_privs_default() are unused.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RLB/MML/MMWP bits in mseccfg CSR are introduced by Smepmp extension.
So they can only be writable and set to 1s when cfg.epmp is true.
Then we also need't check on epmp in pmp_hart_has_privs_default().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We no longer need the pmp_index for matched PMP entry now.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Return the result directly for short cut, since We needn't do the
following check on the PMP entries if there is no PMP rules.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
pmp_get_tlb_size can be separated from get_physical_address_pmp and is only
needed when ret == TRANSLATE_SUCCESS.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PMP entries before (including) the matched PMP entry may only cover partial
of the TLB page, and this may split the page into regions with different
permissions. Such as for PMP0 (0x80000008~0x8000000F, R) and PMP1 (0x80000000~
0x80000FFF, RWX), write access to 0x80000000 will match PMP1. However we cannot
cache the translation result in the TLB since this will make the write access
to 0x80000008 bypass the check of PMP0. So we should check all of them instead
of the matched PMP entry in pmp_get_tlb_size() and set the tlb_size to 1 in
this case.
Set tlb_size to TARGET_PAGE_SIZE if PMP is not support or there is no PMP rules.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
write_misa() must use as much common logic as possible. We want to open
code just the bits that are exclusive to the CSR write operation and TCG
internals.
Our validation is done with riscv_cpu_validate_set_extensions(), but we
need a small tweak first. When enabling RVG we're doing:
env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
env->misa_ext_mask = env->misa_ext;
This works fine for realize() time but this can potentially overwrite
env->misa_ext_mask if we reutilize the function for write_misa().
Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in
misa_ext_mask as well. This won't change realize() time behavior
(misa_ext_mask will be == misa_ext) and will ensure that write_misa()
won't change misa_ext_mask by accident.
After that, rewrite write_misa() to work as follows:
- mask the write using misa_ext_mask to avoid enabling unsupported
extensions;
- suppress RVC if the next insn isn't aligned;
- disable RVG if any of RVG dependencies are being disabled by the user;
- assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On
error, rollback env->misa_ext to its original value, logging a
GUEST_ERROR to inform the user about the failed write;
- handle RVF and MSTATUS_FS and continue as usual.
Let's keep write_misa() as experimental for now until this logic gains
enough mileage.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230517135714.211809-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have 4 config settings being done in riscv_cpu_init(): ext_ifencei,
ext_icsr, mmu and pmp. This is also the constructor of the "riscv-cpu"
device, which happens to be the parent device of every RISC-V cpu.
The result is that these 4 configs are being set every time, and every
other CPU should always account for them. CPUs such as sifive_e need to
disable settings that aren't enabled simply because the parent class
happens to be enabling it.
Moving all configurations from the parent class to each CPU will
centralize the config of each CPU into its own init(), which is clearer
than having to account to whatever happens to be set in the parent
device. These settings are also being set in register_cpu_props() when
no 'misa_ext' is set, so for these CPUs we don't need changes. Named
CPUs will receive all cfgs that the parent were setting into their
init().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is no need to init timers if we're not even sure that our
extensions are valid. Execute riscv_cpu_validate_set_extensions() before
riscv_timer_init().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's remove more code that is open coded in riscv_cpu_realize() and put
it into a helper. Let's also add an error message instead of just
asserting out if env->misa_mxl_max != env->misa_mlx.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're doing env->priv_spec validation and assignment at the start of
riscv_cpu_realize(), which is fine, but then we're doing a force disable
on extensions that aren't compatible with the priv version.
This second step is being done too early. The disabled extensions might be
re-enabled again in riscv_cpu_validate_set_extensions() by accident. A
better place to put this code is at the end of
riscv_cpu_validate_set_extensions() after all the validations are
completed.
Add a new helper, riscv_cpu_disable_priv_spec_isa_exts(), to disable the
extesions after the validation is done. While we're at it, create a
riscv_cpu_validate_priv_spec() helper to host all env->priv_spec related
validation to unclog riscv_cpu_realize a bit.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Even though Zca/Zcf/Zcd can be included by C/F/D, however, their priv
version is higher than the priv version of C/F/D. So if we use check
for them instead of check for C/F/D totally, it will trigger new
problem when we try to disable the extensions based on the configured
priv version.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using implicitly enabled extensions such as Zca/Zcf/Zcd instead of their
super extensions can simplify the extension related check. However, they
may have higher priv version than their super extensions. So we should mask
them in the isa_string based on priv version to make them invisible to user
if the specified priv version is lower than their minimal priv version.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All these generic CPUs are using the latest priv available, at this
moment PRIV_VERSION_1_12_0:
- riscv_any_cpu_init()
- rv32_base_cpu_init()
- rv64_base_cpu_init()
- rv128_base_cpu_init()
Create a new PRIV_VERSION_LATEST enum and use it in those cases. I'll
make it easier to update everything at once when a new priv version is
available.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The setter is doing nothing special. Just set env->priv_ver directly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This setter is doing nothing else but setting env->vext_ver. Assign the
value directly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RVV verification will error out if fails and it's being done at the
end of riscv_cpu_validate_set_extensions(), after we've already set some
extensions that are dependent on RVV. Let's put it in its own function
and do it earlier.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zc* extensions (version 1.0) are ratified.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230510030040.20528-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function is a no-op if 'vta' is zero but we're still doing a lot of
stuff in this function regardless. vext_set_elems_1s() will ignore every
single time (since vta is zero) and we just wasted time.
Skip it altogether in this case. Aside from the code simplification
there's a noticeable emulation performance gain by doing it. For a
regular C binary that does a vectors operation like this:
=======
#define SZ 10000000
int main ()
{
int *a = malloc (SZ * sizeof (int));
int *b = malloc (SZ * sizeof (int));
int *c = malloc (SZ * sizeof (int));
for (int i = 0; i < SZ; i++)
c[i] = a[i] + b[i];
return c[SZ - 1];
}
=======
Emulating it with qemu-riscv64 and RVV takes ~0.3 sec:
$ time ~/work/qemu/build/qemu-riscv64 \
-cpu rv64,debug=false,vext_spec=v1.0,v=true,vlen=128 ./foo.out
real 0m0.303s
user 0m0.281s
sys 0m0.023s
With this skip we take ~0.275 sec:
$ time ~/work/qemu/build/qemu-riscv64 \
-cpu rv64,debug=false,vext_spec=v1.0,v=true,vlen=128 ./foo.out
real 0m0.274s
user 0m0.252s
sys 0m0.019s
This performance gain adds up fast when executing heavy benchmarks like
SPEC.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230427205708.246679-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This queue includes several assorted fixes for target/ppc emulation and
XIVE2. It also includes an openpic fix, an avocado fix for ppc64
binaries without slipr and a Kconfig change for MAC_NEWWORLD.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC
i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw==
=EezE
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-06-10:
This queue includes several assorted fixes for target/ppc emulation and
XIVE2. It also includes an openpic fix, an avocado fix for ppc64
binaries without slipr and a Kconfig change for MAC_NEWWORLD.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC
# i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw==
# =EezE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 10 Jun 2023 06:29:30 AM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu: (29 commits)
hw/ppc/Kconfig: MAC_NEWWORLD should always select USB_OHCI_PCI
target/ppc: Implement gathering irq statistics
tests/avocado/tuxrun_baselines: Fix ppc64 tests for binaries without slirp
hw/ppc/openpic: Do not open-code ROUND_UP() macro
target/ppc: Decrementer fix BookE semantics
target/ppc: Fix decrementer time underflow and infinite timer loop
target/ppc: Rework store conditional to avoid branch
target/ppc: Remove larx/stcx. memory barrier semantics
target/ppc: Ensure stcx size matches larx
target/ppc: Fix lqarx to set cpu_reserve
target/ppc: Eliminate goto in mmubooke_check_tlb()
target/ppc: Change ppcemb_tlb_check() to return bool
target/ppc: Simplify ppcemb_tlb_search()
target/ppc: Remove some unneded line breaks
target/ppc: Move ppcemb_tlb_search() to mmu_common.c
target/ppc: Remove "ext" parameter of ppcemb_tlb_check()
target/ppc: Remove single use function
target/ppc: PMU implement PERFM interrupts
target/ppc: Support directed privileged doorbell interrupt (SDOOR)
target/ppc: Fix msgclrp interrupt type
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Count exceptions which can be queried with info irq monitor command.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606220200.7EBCC74635C@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rework store conditional to avoid a branch in the success case.
Change some of the variable names and layout while here so
gen_conditional_store more closely matches gen_stqcx_.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230605025445.161932-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
larx and stcx. are not defined to order any memory operations.
Remove the barriers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230605025445.161932-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Differently-sized larx/stcx. pairs can succeed if the starting address
matches. Add a check to require the size of stcx. exactly match the larx
that established the reservation. Use the term "reserve_length" for this
state, which matches the terminology used in the ISA.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230605025445.161932-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
lqarx does not set cpu_reserve, which causes stqcx. to never succeed.
Cc: qemu-stable@nongnu.org
Fixes: 94bf265867 ("target/ppc: Use atomic load for LQ and LQARX")
Fixes: 57b38ffd0c ("target/ppc: Use tcg_gen_qemu_{ld,st}_i128 for LQARX, LQ, STQ")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230605025445.161932-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move out checking PID registers into a separate function which makes
mmubooke_check_tlb() simpler and avoids using goto.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <bd84d5f38af0ba2983ccd5c07635db49267c828f.1685448535.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No nead to store return value and break from loop when we can return
directly.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <d470118c3adcbd41b1a91779f6bb7cbdb2b0d346.1685448535.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Make lines shorter and fix indentation in some functions prototypes.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <70952ba2d82141db1cf5cfcf4b227402be575874.1685448535.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function is the only reason why ppcemb_tlb_check() is not static
to mmu_common.c but it also better fits in mmu_common.c so move it
there.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <b64fd712a773558dea9b84945c57785546c0ae2e.1685448535.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is only used by one caller so simplify function by removing this
parameter and move the operation to the single place where it's used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <b21f11ae20e8a8c2e8b5d943f2bff12b5356005a.1685448535.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The get_physical_address() function is a trivial wrapper of
get_physical_address_wtlb() that is only used once. Remove it and call
get_physical_address_wtlb() directly instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <302697d63d26caebefaeee1e45352145ebd0318a.1685448535.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PMU raises a performance monitor exception (causing an interrupt
when MSR[EE]=1) when MMCR0[PMAO] is set, and lowers it when clear.
Wire this up and implement the interrupt delivery for books. Linux perf
record can now collect PMI-driven samples.
fire_PMC_interrupt is renamed to perfm_alert, which matches a bit closer
to the new terminology used in the ISA and distinguishes the alert
condition (e.g., counter overflow) from the PERFM (or EBB) interrupts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530134313.387252-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
BookS msgsndp instruction to self or DPDES register can cause SDOOR
interrupts which crash QEMU with exception not implemented.
Linux does not use msgsndp in SMT1, and KVM only uses DPDES to cause
doorbells when emulating a SMT guest (which is not the default), so
this has gone unnoticed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230530130526.372701-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msgclrp matches msgsndp and should clear PPC_INTERRUPT_DOORBELL.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230530130714.373215-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
FCECE does not get cleared according to the ISA v3.1B.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530134313.387252-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some of the PMU hflags bits can go out of synch, for example a store to
MMCR0 with PMCjCE=1 fails to update hflags correctly and results in
hflags mismatch:
qemu: fatal: TCG hflags mismatch (current:0x2408003d rebuilt:0x240a003d)
This can be reproduced by running perf on a recent machine.
Some of the fragility here is the duplication of PMU hflags calculations.
This change consolidates that in a single place to update pmu-related
hflags, to be called after a well defined state changes.
The post-load PMU update is pulled out of the MSR update because it does
not depend on the MSR value.
Fixes: 8b3d1c49a9 ("target/ppc: Add new PMC HFLAGS")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530130447.372617-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc hypervisors turn HEAI interrupts into program interrupts injected
into the guest that executed the illegal instruction, if the hypervisor
doesn't handle it some other way.
The nested-hv implementation failed to account for this HEAI->program
conversion. The virtual hypervisor wants to see the HEAI when running
a nested guest, so that interrupt type can be returned to its KVM
caller.
Fixes: 7cebc5db2e ("target/ppc: Introduce a vhyp framework for nested HV support")
Cc: balaton@eik.bme.hu
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230530132127.385001-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use the FloatRelation enum to hold the comparison result (missed
in commit 71bfd65c5f "softfloat: Name compare relation enum").
Inspired-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- Add simple tests written in C
-----BEGIN PGP SIGNATURE-----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=5m1P
-----END PGP SIGNATURE-----
Merge tag 'pull-tricore-20230607' of https://github.com/bkoppelmann/qemu into staging
- Refactor PCXI/ICR field handling in newer ISA versions
- Add simple tests written in C
# -----BEGIN PGP SIGNATURE-----
#
# iQJTBAABCgA9FiEEbmNqfoPy3Qz6bm43CtLGOWtpyhQFAmSArqkfHGtiYXN0aWFu
# QG1haWwudW5pLXBhZGVyYm9ybi5kZQAKCRAK0sY5a2nKFKKTD/0dXpexGX7K62d4
# dLZwj9AHOa/9NOD4E6+ub2UYovF7UlydSzy+mgJyxiIUGaPBHYe3dFfktHOppSwn
# OGJp9TTqeutpXYF8/zvDnmf+TDJ71DRQWM40uC0HAUXrjUO43PiK0LMh+fm5D9uG
# vRHSDGBWUNZrNxTZSj8Kx7Sb7PkqeB8qWvpIJh1AVVhIT+dyoAp5V7EkAETpwhtz
# a7qKclQpFNWdaYnthCF5wcmoMawQKMUnO96j0lQWIXfnhDP7XmrWlNM7Ry2cMPEy
# aRxAT3hTOr2dD2Cic8brF/w1NeXJjxWDz65uD7X7Rog54+SD4+SmfZiYwdAs5YMo
# 1XTkbG0qE6HwrtaO+nZDQZFc8tdvLSlDcBd/cjOonwxJyvJVX8qjR2Ufb3PSfTct
# 85R5wRBsEapSbQwicwu71fK0N8ZVkLM3fc4nFEKMxOx8I66eJm3bcTxpT/A8knEw
# OwykEVB3Xiq45JlWOV2BkyZJ1EiHeFQzZfzckW4bYFDdCnuMHlaVG9qpKEAu7mQh
# 4Ug3Y4KhYqZA0UDHG6Ik6Ms64FYU4s+zbFYic/Jhew9NC4MoMXa8oKqXJC5W7RCl
# 1HesyBPu1i/45Xk6/kneJ16YO+i4hcH+Hp/osJrRE6qFHGtbvKJ0EFy1471YHyLf
# HjRQBmsd9XW2TaYBQgST80UvCh9CkQ==
# =5m1P
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 07 Jun 2023 09:22:01 AM PDT
# gpg: using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14
# gpg: issuer "kbastian@mail.uni-paderborn.de"
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14
* tag 'pull-tricore-20230607' of https://github.com/bkoppelmann/qemu:
tests/tcg/tricore: Add recursion test for CSAs
target/tricore: Fix wrong PSW for call insns
target/tricore: Refactor PCXI/ICR register fields
tests/tcg/tricore: Add first C program
tests/tcg/tricore: Uses label for memory addresses
tests/tcg/tricore: Move asm tests into 'asm' directory
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
we were copying PSW into a local variable, updated PSW.CDE in the local
and never wrote it back. So when we called save_context_upper() we were
using the non-local version of PSW which did not contain the updated
PSW.CDE.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-6-kbastian@mail.uni-paderborn.de>
starting from ISA version 1.6.1 (previously known as 1.6P/E), some
bitfields in PCXI and ICR have changed. We also refactor these
registers using the register fields API.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1453
Message-Id: <20230526061946.54514-5-kbastian@mail.uni-paderborn.de>
Fixes the build for --disable-tcg.
This header is only needed for cross-hosting. Without CONFIG_TCG,
we know this is an AArch64 host, CONFIG_ATOMIC64 will be set, and
the TCG_OVERSIZED_GUEST block will never be compiled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* meson.build tweaks
* revert avocado update
* always upgrade/downgrade locally installed Python packages
* switch from submodules to subprojects
* remove --with-git= option
* rename --enable-pypi to --enable-download, control submodules and subprojects too
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmR/Qu8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmSwgAj5SHD8R+5D1UmptzBvI/72CfgqVv
MJa4O1LvHwUkuSmxX1MFFhRa0mo0bu6j+bPpvJ29zKS61ybVwJl87gnsRcDAMXe7
08YbcG35Chox6aZxbidUQtXm18JZ3F2aMtmxUuP0PR7LDjVXLV5FsjrHTIt8KuEZ
vUqq3IsVbc4FxCCC0ke2DzrtgpRCxYSdfPrj/t5WzAztAXId9r1zvUlCLN+FUpri
E3KIZYpkXZyOnJQ9W30KnsZo5QtDACwlIMBK6whSdoCjyNN7TwDdhNW8QkOueNO6
q3tLfwf5+u6uyEoaQTW+teE2oMXT8N4IJllRJj2RyQ1BFD49XhUUJmc33Q==
=b9QD
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* finish atomics revamp
* meson.build tweaks
* revert avocado update
* always upgrade/downgrade locally installed Python packages
* switch from submodules to subprojects
* remove --with-git= option
* rename --enable-pypi to --enable-download, control submodules and subprojects too
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmR/Qu8UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmSwgAj5SHD8R+5D1UmptzBvI/72CfgqVv
# MJa4O1LvHwUkuSmxX1MFFhRa0mo0bu6j+bPpvJ29zKS61ybVwJl87gnsRcDAMXe7
# 08YbcG35Chox6aZxbidUQtXm18JZ3F2aMtmxUuP0PR7LDjVXLV5FsjrHTIt8KuEZ
# vUqq3IsVbc4FxCCC0ke2DzrtgpRCxYSdfPrj/t5WzAztAXId9r1zvUlCLN+FUpri
# E3KIZYpkXZyOnJQ9W30KnsZo5QtDACwlIMBK6whSdoCjyNN7TwDdhNW8QkOueNO6
# q3tLfwf5+u6uyEoaQTW+teE2oMXT8N4IJllRJj2RyQ1BFD49XhUUJmc33Q==
# =b9QD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Jun 2023 07:30:07 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
configure: remove --with-git-submodules=
build: remove git submodule handling from main makefile
meson: subprojects: replace berkeley-{soft,test}float-3 with wraps
pc-bios/s390-ccw: always build network bootloader
configure: move SLOF submodule handling to pc-bios/s390-ccw
meson: subprojects: replace submodules with wrap files
build: log submodule update from git-submodule.sh
git-submodule: allow partial update of .git-submodule-status
configure: rename --enable-pypi to --enable-download, control subprojects too
configure: remove --with-git= option
mkvenv: always pass locally-installed packages to pip
tests: Use separate virtual environment for avocado
Revert "tests/requirements.txt: bump up avocado-framework version to 101.0"
scsi/qemu-pr-helper: Drop support for 'old' libmultipath API
meson.build: Use -Wno-undef only for SDL2 versions that need it
meson.build: Group the audio backend entries in a separate summary section
meson.build: Group the network backend entries in a separate summary section
meson.build: Group the UI entries in a separate summary section
scripts: remove dead file
atomics: eliminate mb_read/mb_set
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing EL0-accessible Debug Communication Channel (DCC) registers in
user mode emulation is currently enabled. However, it does not match
Linux behavior as Linux sets MDSCR_EL1.TDCC on startup to disable EL0
access to DCC (see __cpu_setup() in arch/arm64/mm/proc.S).
This patch fixes access_tdcc() to check MDSCR_EL1.TDCC for EL0 and sets
MDSCR_EL1.TDCC for user mode emulation to match Linux.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: DS7PR12MB630905198DD8E69F6817544CAC4EA@DS7PR12MB6309.namprd12.prod.outlook.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DC CVAP and DC CVADP instructions can be executed in EL0 on Linux,
either directly when SCTLR_EL1.UCI == 1 or emulated by the kernel (see
user_cache_maint_handler() in arch/arm64/kernel/traps.c).
This patch enables execution of the two instructions in user mode
emulation.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Push the mte check behind the exclusive_addr check.
Document the several ways that we are still out of spec
with this implementation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_LSE2 only requires that atomic operations not cross a
16-byte boundary. Ordered operations may be completely
unaligned if SCTLR.nAA is set.
Because this alignment check is so special, do it by hand.
Make sure not to keep TCG temps live across the branch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes a bug in that with SCTLR.A set, we should raise any
alignment fault before raising any MTE check fault.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the individual memop to gen_mte_checkN.
For the moment, do nothing with it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the completed memop to gen_mte_check1_mmuidx.
For the moment, do nothing more than extract the size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is required for LSE2, where the pair must be treated atomically if
it does not cross a 16-byte boundary. But it simplifies the code to do
this always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need to duplicate this check across multiple call sites.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Round len_align to 16 instead of 8, handling an odd 8-byte as part
of the tail. Use MO_ATOM_NONE to indicate that all of these memory
ops have only byte atomicity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a bug in that these two insns should have been using atomic
16-byte stores, since MTE is ARMv8.5 and LSE2 is mandatory from ARMv8.4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we don't require 16-byte atomicity here, using a single larger
operation simplifies the code. Introduce finalize_memop_asimd for this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we don't require 16-byte atomicity here, using a single larger
load simplifies the code, and makes it a closer match to STXP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let finalize_memop_atom be the new basic function, with
finalize_memop and finalize_memop_pair testing FEAT_LSE2
to apply the appropriate atomicity.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Document the meaning of exclusive_high in a big-endian context,
and why we can't change it now.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guests can now be debugged through the gdbstub. Support is added for
single-stepping, software breakpoints, hardware breakpoints and
watchpoints. The code has been structured like the KVM counterpart.
While guest debugging is enabled, the guest can still read and write the
DBG*_EL1 registers but they don't have any effect.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging. The code has been structured like the KVM
counterpart.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-3-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These helpers will be also used for HVF. Aside from reformatting a
couple of comments for 'checkpatch.pl' and updating meson to compile
'hyp_gdbstub.c', this is just code motion.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230601153107.81955-2-fcagnin@quarkslab.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This had been pulled in via exec/translator.h,
but the include of exec-all.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in via exec/exec-all.h, via exec/translator.h,
but the include of exec-all.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/log.h.
Drop otherwise unused includes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/log.h.
Drop otherwise unused includes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that gen_icount_io_start() is a simple wrapper to
translator_io_start(), inline it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230602095439.48102-1-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From this remove, it's no longer clear what this is attempting
to protect. The last time a use of this define was added to
the source tree, as opposed to merely moved around, was 2008.
There have been many cleanups since that time and this is
no longer required for the build to succeed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_INSN_START_WORDS in tcg.c.
Split out "tcg/insn-start-words.h" and use it in target/.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes an assert in tcg_gen_code that we don't accidentally
eliminate an insn_start during optimization.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create helper-proto-common.h without the target specific portion.
Use that in tcg-op-common.h. Include helper-proto.h in target/arm
and target/hexagon before helper-info.c.inc; all other targets are
already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create helper-gen-common.h without the target specific portion.
Use that in tcg-op-common.h. Reorg headers in target/arm to
ensure that helper-gen.h is included before helper-info.c.inc.
All other targets are already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been included via tcg-op-common.h via tcg-op.h,
but that is going away. In idef-parser.y, shuffle some
tcg related includes into a more logical order.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been included via tcg-op-common.h via tcg-op.h,
but that is going away.
It is needed for inlines within translator.h, so we might as well
do it there and not individually in each translator c file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These two items are the last uses of TARGET_LONG_BITS within tcg.h,
and are more in common with the other "_tl" definitions within that file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move a use of TARGET_LONG_BITS out of tcg/tcg.h.
Include the new file only where required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The symbol is always defined, even if to 0. We wanted to test for
TCG_OVERSIZED_GUEST == 0.
This fixed, the #error is reached while building arm-softmmu, because
TCG_OVERSIZED_GUEST is not true (nor supposed to be true) for arm32
guest on a 32-bit host. But that's ok, because this feature doesn't
apply to arm32. Add an #ifdef for TARGET_AARCH64.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in from exec/cpu_ldst.h, via exec/exec-all.h,
but the include of tcg.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in from tcg/tcg.h, via exec/cpu_ldst.h,
via exec/exec-all.h, but the include of tcg.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in from tcg/tcg.h, via exec/cpu_ldst.h,
via exec/exec-all.h, but the include of tcg.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In qemu-user-s390x, /proc/cpuinfo contains:
processor 0: version = 00, identification = 000000, machine = 8561
processor 1: version = 00, identification = 400000, machine = 8561
The highest nibble is supposed to contain the CPU address, but it's off
by 2 bits. Fix the shift value and provide a symbolic constant for it.
With the fix we get:
processor 0: version = 00, identification = 000000, machine = 8561
processor 1: version = 00, identification = 100000, machine = 8561
Fixes: 076d4d39b6 ("s390x/cpumodel: wire up cpu type + id for TCG")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230605113950.1169228-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These instructions multiply 64 bits by 64 bits, not 128 bits by 64 bits.
Reported-by: Tulio Magno Quites Machado Filho <tuliom@redhat.com>
Fixes: 2b91240f95 ("target/s390x: Use Int128 for passing float128")
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2211472
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230601223027.795501-2-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
LCBB is supposed to overwrite only the bottom 32 bits, but QEMU
erroneously overwrites the entire register.
Fixes: 6d9303322e ("s390x/tcg: Implement LOAD COUNT TO BLOCK BOUNDARY")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230526181240.1425579-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We currently need to select ARM_V7M unconditionally when TCG is
present in the build because some translate.c helpers and the whole of
m_helpers.c are not yet under CONFIG_ARM_V7M.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230523180525.29994-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For M-profile, there is no guest-facing A-profile format FSR, but we
still use the env->exception.fsr field to pass fault information from
the point where a fault is raised to the code in
arm_v7m_cpu_do_interrupt() which interprets it and sets the M-profile
specific fault status registers. So it doesn't matter whether we
fill in env->exception.fsr in the short format or the LPAE format, as
long as both sides agree. As it happens arm_v7m_cpu_do_interrupt()
assumes short-form.
In compute_fsr_fsc() we weren't explicitly choosing short-form for
M-profile, but instead relied on it falling out in the wash because
arm_s1_regime_using_lpae_format() would be false. This was broken in
commit 452c67a4 when we added v8R support, because we said "PMSAv8 is
always LPAE format" (as it is for v8R), forgetting that we were
implicitly using this code path on M-profile. At that point we would
hit a g_assert_not_reached():
ERROR:../../target/arm/internals.h:549:arm_fi_to_lfsc: code should not be reached
#7 0x0000555555e055f7 in arm_fi_to_lfsc (fi=0x7fffecff9a90) at ../../target/arm/internals.h:549
#8 0x0000555555e05a27 in compute_fsr_fsc (env=0x555557356670, fi=0x7fffecff9a90, target_el=1, mmu_idx=1, ret_fsc=0x7fffecff9a1c)
at ../../target/arm/tlb_helper.c:95
#9 0x0000555555e05b62 in arm_deliver_fault (cpu=0x555557354800, addr=268961344, access_type=MMU_INST_FETCH, mmu_idx=1, fi=0x7fffecff9a90)
at ../../target/arm/tlb_helper.c:132
#10 0x0000555555e06095 in arm_cpu_tlb_fill (cs=0x555557354800, address=268961344, size=1, access_type=MMU_INST_FETCH, mmu_idx=1, probe=false, retaddr=0)
at ../../target/arm/tlb_helper.c:260
The specific assertion changed when commit fcc7404eff added
"assert not M-profile" to arm_is_secure_below_el3(), because the
conditions being checked in compute_fsr_fsc() include
arm_el_is_aa64(), which will end up calling arm_is_secure_below_el3()
and asserting before we try to call arm_fi_to_lfsc():
#7 0x0000555555efaf43 in arm_is_secure_below_el3 (env=0x5555574665a0) at ../../target/arm/cpu.h:2396
#8 0x0000555555efb103 in arm_is_el2_enabled (env=0x5555574665a0) at ../../target/arm/cpu.h:2448
#9 0x0000555555efb204 in arm_el_is_aa64 (env=0x5555574665a0, el=1) at ../../target/arm/cpu.h:2509
#10 0x0000555555efbdfd in compute_fsr_fsc (env=0x5555574665a0, fi=0x7fffecff99e0, target_el=1, mmu_idx=1, ret_fsc=0x7fffecff996c)
Avoid the assertion and the incorrect FSR format selection by
explicitly making M-profile use the short-format in this function.
Fixes: 452c67a427 ("target/arm: Enable TTBCR_EAE for ARMv8-R AArch32")a
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1658
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230523131726.866635-1-peter.maydell@linaro.org
POWER9 DD2.1 and earlier had significant limitations when running KVM,
including lack of "mixed mode" MMU support (ability to run HPT and RPT
mode on threads of the same core), and a translation prefetch issue
which is worked around by disabling "AIL" mode for the guest.
These processors are not widely available, and it's difficult to deal
with all these quirks in qemu +/- KVM, so create a POWER9 DD2.2 CPU
and make it the default POWER9 CPU.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515160201.394587-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of computing an artificial "class" bitmask then converting that
to the fprf value, compute the final value from the start.
Reorder the tests to check the most likely cases first.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230523202507.688859-1-richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU's PVR value for POWER9 DD2.0 has chip type 1, which is the SMT4
"small core" type that OpenPOWER processors use. QEMU's PVR for all
other POWER9/10 have chip type 0, which "enterprise" systems use.
The difference does not really matter to QEMU (because it does not care
about SMT mode in the target), but for consistency all PVRs should use
the same chip type. We'll go with the SMT4 OpenPOWER type.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230515160131.394562-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The behaviour of the Address Translation Mode on Interrupt resource is
not consistently supported by all CPU versions or all KVM versions: KVM
HV does not support mode 2, and does not support mode 3 on POWER7 or
early POWER9 processesors. KVM PR only supports mode 0. TCG supports all
modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode.
This leads to inconsistencies in guest behaviour and could cause problems
migrating guests.
This was not noticable for Linux guests for a long time because the
kernel only uses modes 0 and 3, and it used to consider AIL-3 to be
advisory in that it would always keep the AIL-0 vectors around, so it
did not matter whether or not interrupts were delivered according to
the AIL mode. Recent Linux guests depend on AIL mode 3 working as
specified in order to support the SCV facility interrupt. If AIL-3 can
not be provided, then H_SET_MODE must return an error to Linux so it can
disable the SCV facility (failure to do so can lead to userspace being
able to crash the guest kernel).
Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0
is implied as the baseline, and AIL-2 is no longer supported by spapr.
AIL-2 is not known to be used by any software, but support in TCG could
be restored with an ail-mode-2 capability quite easily if a regression
is reported.
Modify the H_SET_MODE Address Translation Mode on Interrupt resource
handler to check capabilities and correctly return error if not
supported.
KVM has a cap to advertise support for AIL-3.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230515160216.394612-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This optional behavior was removed from the ISA in v3.0, see
Summary of Changes preface:
Data Storage Interrupt Status Register for Alignment Interrupt:
Simplifies the Alignment interrupt by remov- ing the Data Storage
Interrupt Status Register (DSISR) from the set of registers modified
by the Alignment interrupt.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230515092655.171206-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some 32-bit SPRs are incorrectly implemented as 64-bits on 64-bit
targets.
This changes VRSAVE, DSISR, HDSISR, DAWRX0, PIDR, LPIDR, DEXCR,
HDEXCR, CTRL, TSCR, MMCRH, and PMC[1-6] from to be 32-bit registers.
This only goes by the 32/64 classification in the architecture, it
does not try to implement finer details of SPR implementation (e.g.,
not all bits implemented as simple read/write storage).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515092655.171206-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The following commits changed the code such that the fallback to MFSS for MFFSCRN,
MFFSCRNI, MFFSCE and MFFSL on pre 3.0 ISAs was removed and became an illegal instruction:
bf8adfd88b - target/ppc: Move mffscrn[i] to decodetree
394c2e2fda - target/ppc: Move mffsce to decodetree
3e5bce70ef - target/ppc: Move mffsl to decodetree
The hardware will handle them as a MFFS instruction as the code did previously.
This means applications that were segfaulting under qemu when encountering these
instructions which is used in glibc libm functions for example.
The fallback for MFFSCDRN and MFFSCDRNI added in a later patch was also missing.
This patch restores the fallback to MFSS for these instructions on pre 3.0s ISAs
as the hardware decoder would, fixing the segfaulting libm code. It doesn't have
the fallback for 3.0 onwards to match hardware behaviour.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230510111913.1718734-1-richard.purdie@linuxfoundation.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some code comments refer to hex_new_value and hex_new_pred_value, which
have been transferred to DisasContext and, in the case of hex_new_value,
should now be accessed through get_result_gpr().
In order to fix this outdated comments and also avoid having to tweak
them whenever we make a variable name change in the future, let's
replace them with pseudocode.
Suggested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <8e1689e28dd7b1318369b55127cf47b82ab75921.1684939078.git.quic_mathbern@quicinc.com>
Many Hexagon python scripts call hex_common.get_tagregs(), but only one
call site use the full reg structure given by this function. To make the
code cleaner, let's make get_tagregs() filter out the unused fields
(i.e. 'toss' and 'numregs'), properly removed the unused variables at
the call sites. The hex_common.bad_register() function is also adjusted
to work exclusively with 'regtype' and 'regid' args. For the single call
site that does use toss/numregs, we provide an optional parameter to
get_tagregs() which will restore the old full behavior.
Suggested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <3ffd4ccb972879f57f499705c624e8eaba7f8b52.1684939078.git.quic_mathbern@quicinc.com>
The order in which instructions are generated by gen_insn() influences
assignment to tmp registers. During generation, tmp instructions (e.g.
generate_V6_vassign_tmp) use vreg_src_off() to determine what kind of
register to use as source. If some instruction (e.g.
generate_V6_vmpyowh_64_acc) uses a tmp register but is generated prior
to the corresponding tmp instruction, the vregs_updated_tmp bit map
isn't updated in time.
Exmple:
{ v14.tmp = v16; v25 = v14 } This works properly because
generate_V6_vassign_tmp is generated before generate_V6_vassign
and the bit map is updated.
{ v15:14.tmp = vcombine(v21, v16); v25:24 += vmpyo(v18.w,v14.h) }
This does not work properly because vmpyo is generated before
vcombine and therefore the bit map does not yet know that there's
a tmp register.
The parentheses in the decoding function were in the wrong place.
Moving them to the correct location makes shuffling of .tmp vector
registers work as expected.
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20230522174708.464197-1-quic_mliebel@quicinc.com>
The vinsgr2vr/vpickve2gr instructions need use get_src/get_dst to get
gpr registers value, not cpu_gpr[]. The $zero register does not
have cpu_gpr[0] allocated.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1662
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230525120005.2223413-1-gaosong@loongson.cn>
1.helper_asrtle_d/helper_asrtgt_d need use GETPC() to get PC;
2 LD/ST{LE/GT} need set CSR_BADV = gpr[rj];
3 ASRTLE.D/ASRTGT.D also write CSR_BADV, but this value is random
and has no reference value.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230515130042.2719712-1-gaosong@loongson.cn>
* purge qatomic_mb_read/set from monitor
* build system fixes
* OHCI fix from gitlab
* provide EPYC-Rome CPU model not susceptible to XSAVES erratum
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRvGpEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOa/Af/WS5/tmIlEYgH7UOPERQXNqf7+Jwj
bA2wgqv3ZoQwcgp5f4EVjfA8ABfpGxLZy6xIdUSbWANb8lDJNuh/nPd/em3rWUAU
LnJGGdo1vF31gfsVQnlzb7hJi3ur+e2f8JqkRVskDCk3a7YY44OCN42JdKWLrN9u
CFf2zYqxMqXHjrYrY0Kx2oTkfGDZrfwUlx0vM4dHb8IEoxaplfDd8lJXQzjO4htr
3nPBPjQ+h08EeC7mObH4XoJE0omzovR10GkBo8K4q952xGOQ041Y/2YY7JwLfx0D
na7IanVo+ZAmvTJZoJFSBwNnXkTMHvDH5+Hc45NSTsDBtz0YJhRxPw/z/A==
=A5Lp
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* hot-unplug fixes for ioport
* purge qatomic_mb_read/set from monitor
* build system fixes
* OHCI fix from gitlab
* provide EPYC-Rome CPU model not susceptible to XSAVES erratum
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRvGpEUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOa/Af/WS5/tmIlEYgH7UOPERQXNqf7+Jwj
# bA2wgqv3ZoQwcgp5f4EVjfA8ABfpGxLZy6xIdUSbWANb8lDJNuh/nPd/em3rWUAU
# LnJGGdo1vF31gfsVQnlzb7hJi3ur+e2f8JqkRVskDCk3a7YY44OCN42JdKWLrN9u
# CFf2zYqxMqXHjrYrY0Kx2oTkfGDZrfwUlx0vM4dHb8IEoxaplfDd8lJXQzjO4htr
# 3nPBPjQ+h08EeC7mObH4XoJE0omzovR10GkBo8K4q952xGOQ041Y/2YY7JwLfx0D
# na7IanVo+ZAmvTJZoJFSBwNnXkTMHvDH5+Hc45NSTsDBtz0YJhRxPw/z/A==
# =A5Lp
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 May 2023 01:21:37 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
monitor: do not use mb_read/mb_set
monitor: extract request dequeuing to a new function
monitor: introduce qmp_dispatcher_co_wake
monitor: cleanup fetching of QMP requests
monitor: cleanup detection of qmp_dispatcher_co shutting down
monitor: do not use mb_read/mb_set for suspend_cnt
monitor: add more *_locked() functions
monitor: allow calling monitor_resume under mon_lock
monitor: use QEMU_LOCK_GUARD a bit more
softmmu/ioport.c: make MemoryRegionPortioList owner of portio_list MemoryRegions
softmmu/ioport.c: QOMify MemoryRegionPortioList
softmmu/ioport.c: allocate MemoryRegionPortioList ports on the heap
usb/ohci: Set pad to 0 after frame update
meson: move -no-pie from linker to compiler
meson: fix rule for qemu-ga installer
meson.build: Fix glib -Wno-unused-function workaround
target/i386: EPYC-Rome model without XSAVES
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Based on the kernel commit "b0563468ee x86/CPU/AMD: Disable XSAVES on
AMD family 0x17", host system with EPYC-Rome can clear XSAVES capability
bit. In another words, EPYC-Rome host without XSAVES can occur. Thus, we
need an EPYC-Rome cpu model (without this feature) that matches the
solution of fixing this erratum
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-Id: <20230524213748.8918-1-davydov-max@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This had been set since the beginning, is never undefined,
and it would seem to be harmful to debugging to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create both atomic16_read_ro and atomic16_read_rw.
Previously we pretended that we had atomic16_read in system mode,
because we "know" that all ram is always writable to the host.
Now, expose read-only and read-write versions all of the time.
For aarch64, do not fall back to __atomic_read_16 even if
supported by the compiler, to work around a clang bug.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Eliminate the CONFIG_USER_ONLY specialization.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use cpu_ld16_mmu and cpu_st16_mmu to eliminate the special case,
and change all of the *_data_ra functions to match.
Note that we check the alignment of both compare and store
pointers at the top of the function, so MO_ALIGN* may be
safely removed from the individual memory operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No need to roll our own, as this is now provided by tcg.
This was the last use of retxl, so remove that too.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No need to roll our own, as this is now provided by tcg.
This was the last use of retxl, so remove that too.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This reverts commit b320e21c48,
which accidentally broke TCG, because it made the TCG -cpu max
report the presence of MTE to the guest even if the board hadn't
enabled MTE by wiring up the tag RAM. This meant that if the guest
then tried to use MTE QEMU would segfault accessing the
non-existent tag RAM:
==346473==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address (pc 0x55f328952a4a bp 0x00000213a400 sp 0x7f7871859b80 T346476)
==346473==The signal is caused by a READ memory access.
==346473==Hint: this fault was caused by a dereference of a high value address (see register values below). Disassemble the provided pc to learn which register was used.
#0 0x55f328952a4a in address_space_to_flatview /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:1108:12
#1 0x55f328952a4a in address_space_translate /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:2797:31
#2 0x55f328952a4a in allocation_tag_mem /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:176:10
#3 0x55f32895366c in helper_stgm /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:461:15
#4 0x7f782431a293 (<unknown module>)
It's also not clear that the KVM logic is correct either:
MTE defaults to on there, rather than being only on if the
board wants it on.
Revert the whole commit for now so we can sort out the issues.
(We didn't catch this in CI because we have no test cases in
avocado that use guests with MTE support.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230519145808.348701-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
=1CyJ
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230518-1' of https://github.com/quic/qemu into staging
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
# RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
# KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
# wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
# 7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
# Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
# pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
# =1CyJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 12:48:24 PM PDT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230518-1' of https://github.com/quic/qemu: (44 commits)
Hexagon (linux-user/hexagon): handle breakpoints
Hexagon (gdbstub): add HVX support
Hexagon (gdbstub): fix p3:0 read and write via stub
Hexagon: add core gdbstub xml data for LLDB
gdbstub: add test for untimely stop-reply packets
gdbstub: only send stop-reply packets when allowed to
Remove test_vshuff from hvx_misc tests
Hexagon (decode): look for pkts with multiple insns at the same slot
Hexagon (iclass): update J4_hintjumpr slot constraints
Hexagon: append eflags to unknown cpu model string
Hexagon: list available CPUs with `-cpu help`
Hexagon (target/hexagon/*.py): raise exception on reg parsing error
target/hexagon: fix = vs. == mishap
Hexagon (target/hexagon) Additional instructions handled by idef-parser
Hexagon (target/hexagon) Move items to DisasContext
Hexagon (target/hexagon) Move pkt_has_store_s1 to DisasContext
Hexagon (target/hexagon) Move pred_written to DisasContext
Hexagon (target/hexagon) Move new_pred_value to DisasContext
Hexagon (target/hexagon) Move new_value to DisasContext
Hexagon (target/hexagon) Make special new_value for USR
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Each slot in a packet can be assigned to at most one instruction.
Although the assembler generally ought to enforce this rule, we better
be safe than sorry and also do some check to properly throw an "invalid
packet" exception on wrong slot assignments.
This should also make it easier to debug possible future errors caused
by missing updates to `find_iclass_slots()` rules in
target/hexagon/iclass.c.
Co-authored-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <f8b829443523568823d062adf8bf6659bc6d4a3f.1683552984.git.quic_mathbern@quicinc.com>
The Hexagon PRM says that "The assembler automatically encodes
instructions in the packet in the proper order. In the binary encoding
of a packet, the instructions must be ordered from Slot 3 down to
Slot 0."
Prior to the architecture version v73, the slot constraints from
instruction "hintjr" only allowed it to be executed at slot 2.
With that in mind, consider the packet:
{
hintjr(r0)
nop
nop
if (!p0) memd(r1+#0) = r1:0
}
To satisfy the ordering rule quoted from the PRM, the assembler would,
thus, move one of the nops to the first position, so that it can be
assigned to slot 3 and the subsequent hintjr to slot 2.
However, since v73, hintjr can be executed at either slot 2 or 3. So
there is no need to reorder that packet and the assembler will encode it
as is. When QEMU tries to execute it, however, we end up hitting a
"misaliged store" exception because both the store and the hintjr will
be assigned to store 0, and some functions like `slot_is_predicated()`
expect the decode machinery to assign only one instruction per slot. In
particular, the mentioned function will traverse the packet until it
finds the first instruction at the desired slot which, for slot 0, will
be hintjr. Since hintjr is not predicated, the result is that we try to
execute the store regardless of the predicate. And because the predicate
is false, we had not previously loaded hex_store_addr[0] or
hex_store_width[0]. As a result, the store will decide de width based on
trash memory, causing it to be misaligned.
Update the slot constraints for hintjr so that QEMU can properly handle
such encodings.
Note: to avoid similar-but-not-identical issues in the future, we should
look for multiple instructions at the same slot during decoding time and
throw an invalid packet exception. That will be done in the subsequent
commit.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <0fcd8293642c6324119fbbab44741164bcbd04fb.1673616964.git.quic_mathbern@quicinc.com>
Currently, qemu-hexagon only models the v67 cpu. Nonetheless if we try
to get this information with `-cpu help`, qemu just exists with an error
code and no output. Let's correct that.
The code is basically a copy from target/alpha/cpu.h, but we strip the
"-hexagon-cpu" suffix before printing. This is to avoid confusing
situations like the following:
$ qemu-hexagon -cpu help
Available CPUs:
v67-hexagon-cpu
$ qemu-hexagon -cpu v67-hexagon-cpu ./prog
qemu-hexagon: unable to find CPU model 'v67-hexagon-cpu'
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <b946e17c7e17eed9095700b54c5ead36e5d55dfa.1683225804.git.quic_mathbern@quicinc.com>
Currently, the python scripts used for the hexagon building will not
abort the compilation when there is an error parsing a register. Let's
make the compilation properly fail in such cases by rasing an exception
instead of just printing a warning message, which might get lost in the
output.
This patch was generated with:
git grep -l "Bad register" *hexagon* | \
xargs sed -i "" -e 's/print("Bad register parse: "[, ]*\([^)]*\))/hex_common.bad_register(\1)/g'
Plus the bad_register() helper added to hex_common.py.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1f5dbd92f68fdd89e2647e4ba527a2c32cf0f070.1683217043.git.quic_mathbern@quicinc.com>
**** Changes in v2 ****
Fix yyassert's for sign and zero extends
Coverity reports a parameter that is "set but never used". This is caused
by an assignment operator being used instead of equality.
Co-authored-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230428204411.1400931-1-tsimpson@quicinc.com>
**** Changes in v3 ****
Fix bugs exposed by dpmpyss_rnd_s0 instruction
Set correct size/signedness for constants
Test cases added to tests/tcg/hexagon/misc.c
**** Changes in v2 ****
Fix bug in imm_print identified in clang build
Currently, idef-parser skips all floating point instructions. However,
there are some floating point instructions that can be handled.
The following instructions are now parsed
F2_sfimm_p
F2_sfimm_n
F2_dfimm_p
F2_dfimm_n
F2_dfmpyll
F2_dfmpylh
To make these instructions work, we fix some bugs in parser-helpers.c
gen_rvalue_extend
gen_cast_op
imm_print
lexer properly sets size/signedness of constants
Test cases added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230501203125.4025991-1-tsimpson@quicinc.com>
The following items in the CPUHexagonState are only used for bookkeeping
within the translation of a packet. With recent changes that eliminate
the need to free TCGv variables, these make more sense to be transient
and kept in DisasContext.
The following items are moved
dczero_addr
branch_taken
this_PC
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-22-tsimpson@quicinc.com>
The pkt_has_store_s1 field is only used for bookkeeping helpers with
a load. With recent changes that eliminate the need to free TCGv
variables, it makes more sense to make this transient.
These helpers already take the instruction slot as an argument. We
combine the slot and pkt_has_store_s1 into a single argument called
slotval.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-21-tsimpson@quicinc.com>
The pred_written variable in the CPUHexagonState is only used for
bookkeeping within the translation of a packet. With recent changes
that eliminate the need to free TCGv variables, these make more sense
to be transient and kept in DisasContext.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-20-tsimpson@quicinc.com>
The new_pred_value array in the CPUHexagonState is only used for
bookkeeping within the translation of a packet. With recent changes
that eliminate the need to free TCGv variables, these make more sense
to be transient and kept in DisasContext.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-19-tsimpson@quicinc.com>
The new_value array in the CPUHexagonState is only used for bookkeeping
within the translation of a packet. With recent changes that eliminate
the need to free TCGv variables, these make more sense to be transient
and kept in DisasContext.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-18-tsimpson@quicinc.com>
Precursor to moving new_value from the global state to DisasContext
USR will need to stay in the global state because some helpers will
set it's value
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-17-tsimpson@quicinc.com>
The following have overrides
S2_insert
S2_insert_rp
S2_asr_r_svw_trun
A2_swiz
These instructions have semantics that write to the destination
before all the operand reads have been completed. Therefore,
the idef-parser versions were disabled with the short-circuit patch.
Test cases added to tests/tcg/hexagon/read_write_overlap.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-16-tsimpson@quicinc.com>
The generated helpers for HVX use pass-by-reference, so they can't
short-circuit when the reads/writes overlap. The instructions with
overrides are OK because they use tcg_gen_gvec_*.
We add a flag has_hvx_helper to DisasContext and extend gen_analyze_funcs
to set the flag when the instruction is an HVX instruction with a
generated helper.
We add an override for V6_vcombine so that it can be short-circuited
along with a test case in tests/tcg/hexagon/hvx_misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-15-tsimpson@quicinc.com>
In certain cases, we can avoid the overhead of writing to future_VRegs
and write directly to VRegs. We consider HVX reads/writes when computing
ctx->need_commit. Then, we can early-exit from gen_commit_hvx.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-14-tsimpson@quicinc.com>
In certain cases, we can avoid the overhead of writing to hex_new_pred_value
and write directly to hex_pred. We consider predicate reads/writes when
computing ctx->need_commit. The get_result_pred() function uses this
field to decide between hex_new_pred_value and hex_pred. Then, we can
early-exit from gen_pred_writes.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-13-tsimpson@quicinc.com>
In certain cases, we can avoid the overhead of writing to hex_new_value
and write directly to hex_gpr. We add need_commit field to DisasContext
indicating if the end-of-packet commit is needed. If it is not needed,
get_result_gpr() and get_result_gpr_pair() can return hex_gpr.
We pass the ctx->need_commit to helpers when needed.
Finally, we can early-exit from gen_reg_writes during packet commit.
There are a few instructions whose semantics write to the result before
reading all the inputs. Therefore, the idef-parser generated code is
incompatible with short-circuit. We tell idef-parser to skip them.
For debugging purposes, we add a cpu property to turn off short-circuit.
When the short-circuit property is false, we skip the analysis and force
the end-of-packet commit.
Here's a simple example of the TCG generated for
0x004000b4: 0x7800c020 { R0 = #0x1 }
BEFORE:
---- 004000b4
movi_i32 new_r0,$0x1
mov_i32 r0,new_r0
AFTER:
---- 004000b4
movi_i32 r0,$0x1
This patch reintroduces a use of check_for_attrib, so we remove the
G_GNUC_UNUSED added earlier in this series.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20230427230012.3800327-12-tsimpson@quicinc.com>
Have gen_analyze_funcs mark the registers that are read by the
instruction. We also mark the implicit reads using instruction
attributes.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-11-tsimpson@quicinc.com>
When generating TCG, make sure we have read all the operand registers
before writing to the destination registers.
This is a prerequesite for short-circuiting where the source and dest
operands could be the same.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-10-tsimpson@quicinc.com>
Only endloop instructions will conditionally write to a predicate.
When there is an endloop instruction, we preload the values into
new_pred_value.
The only place pred_written is needed is when HEX_DEBUG is on.
We remove the last use of check_for_attrib. However, new uses will be
introduced later in this series, so we mark it with G_GNUC_UNUSED.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-9-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
The following instructions are overriden
S2_cabacdecbin
SA1_cmpeqi
Remove the log_pred_write function from op_helper.c
Remove references in macros.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-8-tsimpson@quicinc.com>
With the overrides added in prior commits, this function is not used
Remove references in macros.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-7-tsimpson@quicinc.com>
These instructions have implicit reads from p0, so we don't want
them in helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-6-tsimpson@quicinc.com>
