- don't use same name for size in bytes and in entries
- use g_autofree for l2_table
- add whitespace
- fix block comment style
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We cannot write to images opened with O_DIRECT unless we allow them to
be resized so they are aligned to the sector size: Since 9c60a5d197,
bdrv_node_refresh_perm() ensures that for nodes whose length is not
aligned to the request alignment and where someone has taken a WRITE
permission, the RESIZE permission is taken, too).
Let qemu-img convert pass the BDRV_O_RESIZE flag (which causes
blk_new_open() to take the RESIZE permission) when using cache=none for
the target, so that when writing to it, it can be aligned to the target
sector size.
Without this patch, an error is returned:
$ qemu-img convert -f raw -O raw -t none foo.img /mnt/tmp/foo.img
qemu-img: Could not open '/mnt/tmp/foo.img': Cannot get 'write'
permission without 'resize': Image size is not a multiple of request
alignment
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1994266
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210819101200.64235-1-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
There is no conflict and no dependency if we have parallel writes to
different subclusters of one cluster when the cluster itself is already
allocated. So, relax extra dependency.
Measure performance:
First, prepare build/qemu-img-old and build/qemu-img-new images.
cd scripts/simplebench
./img_bench_templater.py
Paste the following to stdin of running script:
qemu_img=../../build/qemu-img-{old|new}
$qemu_img create -f qcow2 -o extended_l2=on /ssd/x.qcow2 1G
$qemu_img bench -c 100000 -d 8 [-s 2K|-s 2K -o 512|-s $((1024*2+512))] \
-w -t none -n /ssd/x.qcow2
The result:
All results are in seconds
------------------ --------- ---------
old new
-s 2K 6.7 ± 15% 6.2 ± 12%
-7%
-s 2K -o 512 13 ± 3% 11 ± 5%
-16%
-s $((1024*2+512)) 9.5 ± 4% 8.4
-12%
------------------ --------- ---------
So small writes are more independent now and that helps to keep deeper
io queue which improves performance.
271 iotest output becomes racy for three allocation in one cluster.
Second and third writes may finish in different order. Second and
third requests don't depend on each other any more. Still they both
depend on first request anyway. Filter out second and third write
offsets to cover both possible outputs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824101517.59802-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[hreitz: s/ an / and /]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
No logic change, just prepare for the following commit. While being
here do also small grammar fix in a comment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824101517.59802-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add simple grammar-parsing template benchmark. New tool consume test
template written in bash with some special grammar injections and
produces multiple tests, run them and finally print a performance
comparison table of different tests produced from one template.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824101517.59802-2-vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We must not inactivate child when parent has write permissions on
it.
Calling .bdrv_inactivate() doesn't help: actually only qcow2 has this
handler and it is used to flush caches, not for permission
manipulations.
So, let's simply check cumulative parent permissions before
inactivating the node.
This commit fixes a crash when we do migration during backup: prior to
the commit nothing prevents all nodes inactivation at migration finish
and following backup write to the target crashes on assertion
"assert(!(bs->open_flags & BDRV_O_INACTIVE));" in
bdrv_co_write_req_prepare().
After the commit, we rely on the fact that copy-before-write filter
keeps write permission on target node to be able to write to it. So
inactivation fails and migration fails as expected.
Corresponding test now passes, so, enable it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210911120027.8063-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a simple test which tries to run migration during backup.
bdrv_inactivate_all() should fail. But due to bug (see next commit with
fix) it doesn't, nodes are inactivated and continued backup crashes
on assertion "assert(!(bs->open_flags & BDRV_O_INACTIVE));" in
bdrv_co_write_req_prepare().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210911120027.8063-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In mirror_iteration() we call mirror_wait_on_conflicts() with
`self` parameter set to NULL.
Starting from commit d44dae1a7c we dereference `self` pointer in
mirror_wait_on_conflicts() without checks if it is not NULL.
Backtrace:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>)
at ../block/mirror.c:172
172 self->waiting_for_op = op;
[Current thread is 1 (Thread 0x7f0908931ec0 (LWP 380249))]
(gdb) bt
#0 mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>)
at ../block/mirror.c:172
#1 0x00005610c5d9d631 in mirror_run (job=0x5610c76a2c00, errp=<optimized out>) at ../block/mirror.c:491
#2 0x00005610c5d58726 in job_co_entry (opaque=0x5610c76a2c00) at ../job.c:917
#3 0x00005610c5f046c6 in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>)
at ../util/coroutine-ucontext.c:173
#4 0x00007f0909975820 in ?? () at ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
from /usr/lib64/libc.so.6
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001404
Fixes: d44dae1a7c ("block/mirror: fix active mirror dead-lock in mirror_wait_on_conflicts")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210910124533.288318-1-sgarzare@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
297 so far does not check the named tests, which reside in the tests/
directory (i.e. full path tests/qemu-iotests/tests). Fix it.
Thanks to the previous two commits, all named tests pass its scrutiny,
so we do not have to add anything to SKIP_FILES.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210902094017.32902-6-hreitz@redhat.com>
The AbnormalShutdown exception class is not in qemu.machine, but in
qemu.machine.machine. (qemu.machine.AbnormalShutdown was enough for
Python to find it in order to run this test, but pylint complains about
it.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210902094017.32902-5-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
There are a couple of things pylint takes issue with:
- The "time" import is unused
- The import order (iotests should come last)
- get_bitmap_hash() doesn't use @self and so should be a function
- Semicolons at the end of some lines
- Parentheses after "if"
- Some lines are too long (80 characters instead of 79)
- inject_test_case()'s @name parameter shadows a top-level @name
variable
- "lambda self: mc(self)" were equivalent to just "mc", but in
inject_test_case(), it is not equivalent, so add a comment and disable
the warning locally
- Always put two empty lines after a function
- f'exec: cat > /dev/null' does not need to be an f-string
Fix them.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210902094017.32902-4-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
pylint complains that discards1_sha256 and all_discards_sha256 are first
set in non-__init__ methods.
These variables are not really class-variables anyway, so let them
instead be returned by start_postcopy(), thus silencing pylint.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902094017.32902-3-hreitz@redhat.com>
169 and 199 have been renamed and moved to tests/ (commit a44be0334b:
"iotests: rename and move 169 and 199 tests"), so we can drop them from
the skip list.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210902094017.32902-2-hreitz@redhat.com>
pylint proposes using `[]` instead of `list()` and `{}` instead of
`dict()`, because it is faster. That seems simple enough, so heed its
advice.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824153540.177128-3-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
As of recently, pylint complains when `open()` calls are missing an
`encoding=` specified. Everything we have should be UTF-8 (and in fact,
everything should be UTF-8, period (exceptions apply)), so use that.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824153540.177128-2-hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
bdrv_co_block_status() does it for us, we do not need to do it here.
The advantage of not capping *pnum is that bdrv_co_block_status() can
cache larger data regions than requested by its caller.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-7-hreitz@redhat.com>
bdrv_co_block_status() does it for us, we do not need to do it here.
The advantage of not capping *pnum is that bdrv_co_block_status() can
cache larger data regions than requested by its caller.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-6-hreitz@redhat.com>
bdrv_co_block_status() does it for us, we do not need to do it here.
The advantage of not capping *pnum is that bdrv_co_block_status() can
cache larger data regions than requested by its caller.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-5-hreitz@redhat.com>
.bdrv_co_block_status() implementations are free to return a *pnum that
exceeds @bytes, because bdrv_co_block_status() in block/io.c will clamp
*pnum as necessary.
On the other hand, if drivers' implementations return values for *pnum
that are as large as possible, our recently introduced block-status
cache will become more effective.
So, make a note in block_int.h that @bytes is no upper limit for *pnum.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210812084148.14458-4-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
As we have attempted before
(https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg06451.html,
"file-posix: Cache lseek result for data regions";
https://lists.nongnu.org/archive/html/qemu-block/2021-02/msg00934.html,
"file-posix: Cache next hole"), this patch seeks to reduce the number of
SEEK_DATA/HOLE operations the file-posix driver has to perform. The
main difference is that this time it is implemented as part of the
general block layer code.
The problem we face is that on some filesystems or in some
circumstances, SEEK_DATA/HOLE is unreasonably slow. Given the
implementation is outside of qemu, there is little we can do about its
performance.
We have already introduced the want_zero parameter to
bdrv_co_block_status() to reduce the number of SEEK_DATA/HOLE calls
unless we really want zero information; but sometimes we do want that
information, because for files that consist largely of zero areas,
special-casing those areas can give large performance boosts. So the
real problem is with files that consist largely of data, so that
inquiring the block status does not gain us much performance, but where
such an inquiry itself takes a lot of time.
To address this, we want to cache data regions. Most of the time, when
bad performance is reported, it is in places where the image is iterated
over from start to end (qemu-img convert or the mirror job), so a simple
yet effective solution is to cache only the current data region.
(Note that only caching data regions but not zero regions means that
returning false information from the cache is not catastrophic: Treating
zeroes as data is fine. While we try to invalidate the cache on zero
writes and discards, such incongruences may still occur when there are
other processes writing to the image.)
We only use the cache for nodes without children (i.e. protocol nodes),
because that is where the problem is: Drivers that rely on block-status
implementations outside of qemu (e.g. SEEK_DATA/HOLE).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/307
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210812084148.14458-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[hreitz: Added `local_file == bs` assertion, as suggested by Vladimir]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a comment above the BDS definition stating care must be taken
to consider handling newly added fields in bdrv_append().
Actually, this comment should have said "bdrv_swap()" as of 4ddc07cac
(nine years ago), and in any case, bdrv_swap() was dropped in
8e419aefa (six years ago). So no such care is necessary anymore.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-2-hreitz@redhat.com>
gluster's block-status implementation is basically a copy of that in
block/file-posix.c, there is only one thing missing, and that is
aligning trailing data extents to the request alignment (as added by
commit 9c3db310ff).
Note that 9c3db310ff mentions that "there seems to be no other block
driver that sets request_alignment and [...]", but while block/gluster.c
does indeed not set request_alignment, block/io.c's
bdrv_refresh_limits() will still default to an alignment of 512 because
block/gluster.c does not provide a byte-aligned read function.
Therefore, unaligned tails can conceivably occur, and so we should apply
the change from 9c3db310ff to gluster's block-status implementation.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210805143603.59503-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Let the compiler decide about inlining.
Remove tcg_out_nop as unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already computed the rotated value of the imm8
portion of the complete imm12 encoding. No sense leaving
the combination of rot + rotation to the caller.
Create an encode_imm12_nofail helper that performs an assert.
This removes the final use of the local "rotl" function,
which duplicated our generic "rol32" function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand these hard-coded instructions symbolically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ARMv4T has BX as its only interworking instruction. In order
to support testing of different architecture revisions with a
qemu binary that may have been built for, say ARMv6T2, fill in
the blank required to make calls to helpers in thumb mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the Arm ARM DDI 0406C, section A1.3, the valid variants
are ARMv5T, ARMv5TE, ARMv5TEJ -- there is no ARMv5 without Thumb.
Therefore simplify the test from preprocessor ifdefs to base
architecture revision. Retain the "t" in the name to minimize churn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some of the functions specified _reg, some _imm, and some
left it blank. Make it clearer to which we are referring.
Split tcg_out_b_reg from tcg_out_bx_reg, to indicate when
we do not actually require BX semantics.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GCC since 4.8 provides the definition and we now require 7.5.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
x86_64 dotnet/runtime uses cmpxchg for code patching. When running it
under s390x qemu-linux user, cpu_signal_handler() does not recognize
this as a write and does not restore PAGE_WRITE cleared by
tb_page_add(), incorrectly forwarding the signal to the guest code.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210803221606.150103-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_get_pic_interrupt() is now unreachable from user-mode,
delete the unnecessary stubs.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-25-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All targets call TCGCPUOps::cpu_exec_interrupt() from sysemu code.
Move its declaration to restrict it to system emulation.
Extend the code guarded.
Restrict the static inlined need_replay_interrupt() method to
avoid a "defined but not used" warning.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-24-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-23-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-22-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-21-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-20-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210911165434.531552-19-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210911165434.531552-18-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-17-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-16-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-15-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-14-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Following the logic of commit 30493a030f ("i386: split seg_helper
into user-only and sysemu parts"), move x86_cpu_exec_interrupt()
under sysemu/seg_helper.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-By: Warner Losh <imp@bsdimp.com>
Message-Id: <20210911165434.531552-12-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-11-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-10-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
