Some of the TIMA Special CI operations perform the same operation at
alternative byte offsets and lengths. The following
xive2_tm_opertions[] table entries are missing when they exist for
other offsets/sizes and have been added:
- lwz@0x810 Pull/Invalidate O/S Context to register added
lwz@0x818 exists
ld @0x818 exists
- lwz@0x820 Pull Pool Context to register added
lwz@0x828 exists
ld @0x828 exists
- lwz@0x830 Pull Thread Context to register added
lbz@0x838 exists
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
PHYP uses 8-byte writes to the 2nd doubleword of the OS context
line when dispatching an OS level virtual processor. This
support was not used by OPAL/Linux and so was never added.
Without this support, the XIVE code doesn't notice that a new
context is being pushed and fails to check for unpresented
pending interrupts for that context.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Current code was updating the PIPR inside the xive_tctx_accept() function
instead of the xive_tctx_set_cppr function, which is where the HW would
have it updated.
Moved the update to the xive_tctx_set_cppr function which required
additional support for pool interrupts.
Fixes: cdd4de68ed ("ppc/xive: notify the CPU when the interrupt priority is more privileged")
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Hypervisor "pool" targets do not get their own interrupt line and instead
must share an interrupt line with the hypervisor "physical" targets.
This also means that the pool ring must use some of the registers from the
physical ring in the TIMA. Specifically, the NSR, PIPR and CPPR registers:
NSR = Notification Source Register
PIPR = Post Interrupt Priority Register
CPPR = Current Processor Priority Register
The NSR specifies that there is an active interrupt. The CPPR
specifies the priority of the context and the PIPR specifies the
priority of the interrupt. For an interrupt to be presented to
a context, the priority of the interrupt must be higher than the
priority of the context it is interrupting (value must be lower).
The existing code was not aware of the sharing of these registers.
This commit adds that support.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for single byte writes to offset 0xC38 of the TIMA address
space. When this offset is written to, the hardware disables the thread
context and copies the current state information to the odd cache line of
the pair specified by the NVT structure indexed by the THREAD CAM entry.
Note that this operation is almost identical to what we are already doing
for the "Pull OS Context to Odd Thread Reporting Line" operation except
that it also invalidates the Pool and Thread Contexts.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Some the functions that have been created are specific to a ring or context. Some
of these same functions are being changed to operate on any ring/context. This will
simplify the next patch sets that are adding additional ring/context operations.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for single byte read of offset 0x838 of the TIMA address
space. According to the XIVE2 Specification, this causes the hardware
to atomically:
1. Read the number of bytes requested (lbz or lhz are supported).
2. Reset the valid bit of the thread context.
3. Return the number of bytes requested in step 1 to a register.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When running PowerVM, the console is littered with XIVE traces regarding
invalid writes to TIMA address 0x100b6 due to a lack of support for writes
to the "TARGET" field which was added for XIVE GEN2. To fix this, we add
special op support for 1-byte writes to this field.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The 'info pic' HMP command dumps the state of the interrupt controller.
Add the dump of the NVG and NVC tables to its output to ease debug.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The 'PGoFirst' field of a Notify Virtual Processor tells if the NVP
belongs to a VP group.
Also, print the Reporting Cache Line address, if defined.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for single byte writes to offset 0x15 of the TIMA address
space. This offset holds the Logical Server Group Size (LGS) field.
The field is used to evenly distribute the interrupt load among the
members of a group, but is unused in the current implementation so we
just support the writing of the value for now.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for single byte writes to offset 0xC18 of the TIMA address
space. When this offset is written to, the hardware disables the OS
context and copies the current state information to the odd cache line
of the pair specified by the NVT structure indexed by the OS CAM entry.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The OGEN field at offset 0x1F is a new field for Gen2 TIMA. This
patch defines it.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Making some pre-requisite alignment changes ahead of the following patch
sets. Making these changes now will ease the review of the patch sets.
Checkpatch wants the closing comment '*/' on a separate line, unless it is
on the same line as the starting comment '/*'.
There are also changes to prevent lines from spanning 80 columns.
Changed block of defines from:
#define A 1 /* original define comment is not
* preferred, but not flagged... */
#define B 2 /* Newly added define comment
* is flagged with a warning */
To:
#define A 1 /* original define comment is */
/* now fine, no warning... */
#define B 2 /* Newly added define comment */
/* is fine... */
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The length of this region can be > 32-bits, which overflows size_t on
32-bit hosts. Change to uint64_t.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently any device tree passed with -dtb option in QEMU, was ignored
by the PowerNV code.
Read and pass the passed -dtb to the kernel, thus enabling easier
debugging with custom DTBs.
The existing behaviour when -dtb is 'not' passed, is preserved as-is.
But when a '-dtb' is passed, it completely overrides any dtb nodes or
changes QEMU might have done, such as '-append' arguments to the kernel
(which are mentioned in /chosen/bootargs in the dtb), hence add warning
when -dtb is being used
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The DPDES support for doorbell emulation and handling for KVM on PAPR
guests was added in Linux via [1]. Subsequently, a new GSB (Guest State
Buffer) element for DPDES was added in Linux; the same has been missing
in TCG L0 implementation. Add support for DPDES register's APIv2 GSB
element and required handling in `spapr_nested.c`.
Currently, booting a KVM guest inside a QEMU TCG guest fails with the
following crash. The crash occurs while handling the GUEST_RUN_VCPU
hcall made in TCG L0. In the hcall handling path, map_and_getset_state()
calls getset_state(), which, in turn, calls guest_state_request_check()
to validate the GSR (Guest State Request) elements. During this process,
guest_state_request_check() iterates over the GSR elements and receives
a NULL return code from guest_state_element_type_find() for the type
variable corresponding to the DPDES register's elemetn ID (which was
unknown to TCG L0). Subsequently, getset_state() returns H_P3,
ultimately leading to the hcall failure and causing the KVM guest to
crash.
KVM: unknown exit, hardware reason ffffffffffffffea
[ ... KVM register dump ... ]
Fix this by adding the required support in TCG L0 implementation of
APIv2.
[1] https://lore.kernel.org/all/20240605113913.83715-1-gautam@linux.ibm.com/
Fixes: 4a575f9a05 ("spapr: nested: Initialize the GSB elements lookup table.")
Suggested-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Historically, the registration of sprs have been inherited alongwith
every new Power arch support being added leading to a lot of code
duplication. It's time to do necessary cleanups now to avoid further
duplication with newer arch support being added.
Signed-off-by: Harsh Prateek Bora <harshb@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
ppc_excp_apply_ail has multiple if-checks for ail which is un-necessary.
Combine them as appropriate.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As previously done for arch specific handlers, simplify var usage in
ppc_next_unmasked_interrupt by caching the env->pending_interrupts and
env->spr[SPR_LPCR] in local vars and using it later at multiple places.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Like p8 and p9, simplifying p7 exception handling rotuines to avoid
un-necessary multiple indirect accesses to env->pending_interrupts and
env->spr[SPR_LPCR].
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Most of the p8 exception handling accesses env->pending_interrupts and
env->spr[SPR_LPCR] at multiple places. Passing it directly as local
variables simplifies the code and avoids multiple indirect accesses.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently, p9 exception handling has multiple if-condition checks where
it does an indirect access to pending_interrupts and LPCR via env.
Pass the values during entry to avoid multiple indirect accesses.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The second if-condition can be true only if the first one above is true.
Enclose the latter into the former to avoid un-necessary check if first
condition fails.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cache env->spr[SPR_POWER_MMCR0] in a local variable as used in multiple
conditions to avoid multiple indirect accesses.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
hreg_compute_hflags_value already stores msr locally to be used in most
of the logic in the routine however some instances are still using
env->msr which is unnecessary. Use locally stored value as available.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add sPAPR CPU Core definition for Power11
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add CPU target code to add support for new Power11 Processor.
Power11 core is same as Power10, hence reuse functions defined for
Power10.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power11 has the same PCR (Processor Compatibility Register) value, as
Power10.
Due to this, QEMU considers Power11 as a valid compat-mode for Power10,
ie. earlier it was possible to run QEMU with
'-M pseries,max-compat-mode=power11 --cpu power10'
Same PCR also introduced a regression where `-M pseries --cpu power10`
boots as Power11 (ie. logical PVR is of Power11, even though PVR is
Power10). The regression was due to 'do_client_architecture_support'
checking for valid compat modes and finding Power11 to be a valid compat
mode for Power10 (it happens even without passing 'max-compat-mode'
explicitly).
Fix compat-mode issue and regression, by ensuring a future Power
processor (with a higher logical_pvr value, eg. P11) cannot be valid
compat-mode for an older Power processor (eg. P10)
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce 'PnvChipClass::spapr_logical_pvr' to know corresponding logical
PVR of a PowerPC CPU.
This helps to have a one-to-one mapping between PVR and logical PVR for
a CPU, and used in a later commit to handle cases where PCR of two
generations of Power chip is same, which causes regressions with
compat-mode.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power9/10 initialization code consists of a lot of logical OR of
various flag bits as supported by respective Power platform during its
initialization, most of which is duplicated and only selected bits are
added or removed as needed with each new platform support being added.
Remove the duplicate code and share using common macros.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
[adityag: renamed many POWERPC_* flags to PPC_* flags, checkpatch fixes]
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 0cac0f1b96 marked pseries-2.12 machines as deprecated
with reasons mentioned in its commit log.
Removing pseries-2.12 specific code with this patch.
While at it, also remove pre-3.0-migration hacks introduced for backward
compatibility which are now turned useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 0cac0f1b96 marked pseries-2.12 machines as deprecated
with reasons mentioned in its commit log.
Removing pseries-2.12-sxxm specific code with this patch.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.11 specific code with this patch.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.10 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.9 specific code with this patch for now.
While at it, also remove the pre-2.10 migration hacks which now become
obsolete.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.8 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.7 specific code with this patch for now.
While at it, also remove pre-2.8-migration and pci/mmio hacks introduced
for backward compatibility.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.6 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.5 specific code with this patch for now.
Also drop sPAPRMachineClass::use_ohci_by_default which is now useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.4 specific code with this patch for now.
While at it, also remove SpaprMachineClass::dr_lmb_enabled which is
now turned useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.3 specific code with this patch for now.
While at it, also remove the dynamic-reconfiguration option which was
introduced to disable it by default for legacy machines until pseries-2.3.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.2 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.1 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The BookE decrementer stops at 0, meaning that it won't decremented
towards "negative" values. However, the current logic is inverted: decr
is updated solely when the resulting value would be negative.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Fixes: 8e0a5ac878 ("hw/ppc: Avoid decrementer rounding errors")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[1] deprecated -mpower8-vector, resulting in:
powerpc64-linux-gnu-gcc: warning: switch '-mpower8-vector' is no longer supported
qemu/tests/tcg/ppc64/vsx_f2i_nan.c:4:15: error: expected ';' before 'float'
4 | typedef vector float vsx_float32_vec_t;
| ^~~~~~
Use -mcpu=power8 instead. In order to properly verify that this works,
one needs a big-endian (the minimum supported CPU for 64-bit
little-endian is power8 anyway) GCC configured with --enable-checking
(see GCC commit e154242724b0 ("[RS6000] Don't pass -many to the
assembler").
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=109987
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In this commit the following coverity scan defect has been fixed
CID 1558831: Resource leaks (RESOURCE_LEAK)
Variable "rsp_payload" going out of scope leaks the storage it
points to.
Cc: qemu-stable@nongnu.org
Fixes: Coverity CID 1558831
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Fixes: b4cb930e40 ("hw/ssi: Extend SPI model")
[PMD: Rebased on previous commit (returning earlier)]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return early to simplify next commit.
No logical change intended.
Cc: qemu-stable@nongnu.org
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
pnv_spi_xfer_buffer_new() allocates %payload using g_malloc0(),
and pnv_spi_xfer_buffer_write_ptr() allocates %payload->data
using g_realloc(). Use the API equivalent g_free() to release
the buffers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
