Eliminate the set_rc argument from the gen_compute_fprf utility and
the corresponding (and incorrect) implementation. Replace it with
calls to the gen_set_cr1_from_fpscr() utility.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Update the Move From FPSCR (mffs.) instruction to correctly
set CR[1] from FPSCR[FX,FEX,VX,OX].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Floating Point Move instructions (fmr., fabs., fnabs., fneg.,
and fcpsgn.) incorrectly copy FPSCR[FPCC] instead of [FX,FEX,VX,OX].
Furthermore, the current code does this via a call to gen_compute_fprf,
which is awkward since these instructions do not actually set FPRF.
Change the code to use the gen_set_cr1_from_fpscr utility.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: whitespace fixes]
Signed-off-by: Alexander Graf <agraf@suse.de>
The Power ISA square root instructions (fsqrt[s], frsqrte[s]) must
set the FPSCR[VXSQRT] flag when operating on a negative value.
However, NaNs have no sign and therefore this flag should not
be set when operating on one.
Change the order of the checks in the helper code. Move the
SNaN-to-QNaN macro to the top of the file so that it can be
re-used.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Load Vector Element Indexed and Store Vector Element Indexed
instructions compute an effective address in the usual manner.
However, they truncate that address to the natural boundary.
For example, the lvewx instruction will ignore the least significant
two bits of the address and thus load the aligned word of storage.
Fix the generators for these instruction to properly perform this
truncation.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running barebox on qemu-system-mips* with '-d unimp' overloads
stderr by very very many mips_cpu_handle_mmu_fault() messages:
mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3
mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3
mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0
So it's very difficult to find LOG_UNIMP message.
The mips_cpu_handle_mmu_fault() messages appear on enabling ANY
logging! It's not very handy.
Adding separate log category for *_cpu_handle_mmu_fault()
logging fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Move to Vector Status and Control Register (mtvscr) instruction
uses VRB as the source register. Fix the code generator to correctly
decode the VRB field. That is, use "rB(ctx->opcode)" instead of
"rD(ctx->opcode)".
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
In the previous patch, the registers were added to init_proc_G2LE
instead of init_proc_e300.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Correct the opcodes for the vrfim, vrfin and vrfiz instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of Vector Compare Bounds Single Precision.
Specifically, fix the case where the operands are unordered -- since
the result is non-zero, the CR[6] field should be set to zero.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of the Altivec shift left and shift right
instructions (vsl, vsr) which erroneously inverts shift direction
on big endian hosts.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch simplifies the AES code, by directly accessing the newly added
S-Box, InvS-Box tables instead of recreating them by using the AES_Te and
AES_Td tables.
Cc: Alexander Graf <agraf@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The MMU index is an internal detail that should not be needed by the
translator (except to generate loads and stores). Look at the MSR
directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
strncat() will append additional '\0' to destination buffer, so need
additional 1 byte for it, or may cause memory overflow, just like other
area within QEMU have done.
And can use g_strdup_printf() instead of strncat(), which may be more
easier understanding.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Opcode table has direct, indirect and double indirect handlers, but
ppc_cpu_unrealizefn() frees direct handlers which are never allocated
and never frees double indirect handlers.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Define and use macros instead of direct numbers wherever
possible in ppc opcodes table handling code.
This doesn't change any code functionality.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add a new processor type 440x5wDFPU for Virtex 5 PPC440
with an external APU FPU in double precision mode
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch remove limitation for fc[tf]id[*] on 32 bits targets and
add a new insn flag for signed integer 64 conversion PPC2_FP_CVT_S64
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Adjust the IVOR mask for generic Book E implementation to support bit 59.
This is consistent with the Power ISA.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reported-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
By mistake, QEMU uses the maximum compatibility level from the command
line instead of the value negotiated in client-architecture-support call.
This replaces @max_compat with @cpu_version. This only affects guests
which do not support the host CPU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This will match the code we use in fpu_helper.c when we flip
CRF_* bit-endianness.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It sets CR1, not CR6 (and the spec agrees).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It must return 8 and place 8 in XER, but the current code uses
i directly which is 9 at this point of the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The legacy_name is useless now, better help
information is provided by description field of property.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The descriptions can serve as documentation in the code,
and they can be used to provide better help.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Optimize mulldo by using the muls2_i64 operation rather than a helper. Eliminate
the obsolete helper code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Simplify the implementation of mullwo. For 64 bit CPUs, the result is
the concatenation of the upper and lower parts of the muls2_i32 operation,
which may be slightly better than deposit. For 32 bit CPUs, the lower part
of the muls_i32 operation is moved into the target GPR.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eliminate the unecessary ext32s TCG operation and make the multiplication
operation explicitly 32 bit.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Optimize the special case of rlwnm where MB=0 and ME=31. This can
be implemented using a ROTL.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Optimize the special case of rlwinm where MB=0 and ME=31. This can
be implemented as a 32-bit ROTL.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The special case of rlwimi where MB <= ME and SH = 31-ME can be implemented
with a single TCG deposit operation. This replaces the less general case
of SH = MB = 0 and ME = 31.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
To find out whether we support the KVM hypercall interface we need to ask KVM
on the VM level rather than the global KVM level, because Book3S HV KVM does
not support it and we play conservative when both HV and PR are loaded.
So instead, use the VM helper that falls back to global KVM enumeration. That
should cover all cases.
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the check for carry in the srad helper to properly construct
the mask -- a "1ULL" must be used (instead of "1") in order to
get the desired result.
Example:
R3 8000000000000000
R4 F3511AD4A2CD4C38
srad 3,3,4
Should *not* set XER[CA] but does without this patch.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For 64 bit implementations, the special case of a shift by zero
should result in the sign extension of the least significant 32 bits
of the source GPR (not a direct copy of the 64 bit source GPR).
Example:
R3 A6212433228F41DC
srawi 3,3,0
R3 expected : 00000000228F41DC
R3 actual : A6212433228F41DC (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the code to properly detect overflow; the 128 bit signed
product must have all zeroes or all ones in the first 65 bits
otherwise OV should be set.
Example:
R3 45F086A5D5887509
R4 0000000000000002
mulldo 3,3,4
Should set XER[OV].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For 64-bit implementations, the mullw result is the 64 bit product
of the sign-extended least significant 32 bits of the source
registers.
Fix the code to properly sign extend the source operands and produce
a 64 bit product.
Example:
R3 00000000002F37A0
R4 41C33D242F816715
mullw 3,3,4
R3 expected : 0008C3146AE0F020
R3 actual : 000000006AE0F020 (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On 64-bit implementations, the mullwo result is the 64 bit product of
the signed 32 bit operands. Fix the implementation to properly deposit
the upper 32 bits into the target register.
Example:
R3 0407DED115077586
R4 53778DF3CA992E09
mullwo 3,3,4
R3 expected : FB9D02730D7735B6
R3 actual : 000000000D7735B6 (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The rlwimi specification includes the ROTL32 operation, which is defined
to be a left rotation of two copies of the least significant 32 bits of
the source GPR.
The current implementation is incorrect on 64-bit implementations in that
it rotates a single copy of the least significant 32 bits, padding with
zeroes in the most significant bits.
Fix the code to properly implement this ROTL32 operation.
Also fix the special case of MB=31 and ME=0 to copy the entire contents
of the source GPR.
Examples:
R3 FFFFFFFFFFFFFFF0
rlwimi 3,3,29,14,1
R3 expected : 1FFFFFFE3FFFFFFE
R3 actual : 000000003FFFFFFE (without this patch)
R3 ED7EB4DD824F0853
rlwimi 3,3,10,31,0
R3 expected : 3C214E09024F0853
R3 actual : 00000000024F0853 (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The rlwnm specification includes the ROTL32 operation, which is defined
to be a left rotation of two copies of the least significant 32 bits of
the source GPR.
The current implementation is incorrect on 64-bit implementations in that
it rotates a single copy of the least significant 32 bits, padding with
zeroes in the most significant bits.
Fix the code to properly implement this ROTL32 operation.
Example:
R3 = 0000000000000002
R4 = 7FFFFFFFFFFFFFFF
rlwnm 3,3,4,31,16
R3 expected : 0000000100000001
R3 actual : 0000000000000001 (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The rlwinm specification includes the ROTL32 operation, which is defined
to be a left rotation of two copies of the least significant 32 bits of
the source GPR.
The current implementation is incorrect on 64-bit implementations in that
it rotates a single copy of the least significant 32 bits, padding with
zeroes in the most significant bits.
Fix the code to properly implement this ROTL32 operation.
Example:
R3 = F7487D82EC6F75DF
rlwinm 3,3,5,12,4
R3 expected : 8DEEBBFD880EBBFD
R3 actual : 00000000880EBBFD (without this fix)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds hardware breakpoint and hardware watchpoint support
for ppc.
On BOOKE architecture we cannot share debug resources between QEMU
and guest because:
When QEMU is using debug resources then debug exception must
be always enabled. To achieve this we set MSR_DE and also set
MSRP_DEP so guest cannot change MSR_DE.
When emulating debug resource for guest we want guest
to control MSR_DE (enable/disable debug interrupt on need).
So above mentioned two configuration cannot be supported
at the same time. So the result is that we cannot share
debug resources between QEMU and Guest on BOOKE architecture.
In the current design QEMU gets priority over guest,
this means that if QEMU is using debug resources then guest
cannot use them and if guest is using debug resource then
qemu can overwrite them.
When QEMU is not able to handle debug exception then we inject program
exception to guest. Yes program exception NOT debug exception and the
reason is:
1) QEMU and guest not sharing debug resources
2) For software breakpoint QEMU uses a ehpriv-1 instruction;
So there cannot be any reason that we are in qemu with exit reason
KVM_EXIT_DEBUG for guest set debug exception, only possibility is
guest executed ehpriv-1 privilege instruction and that's why we are
injecting program exception.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch allow insert/remove software breakpoint.
When QEMU is not able to handle debug exception then we inject
program exception to guest because for software breakpoint QEMU
uses a ehpriv-1 instruction;
So there cannot be any reason that we are in qemu with exit reason
KVM_EXIT_DEBUG for guest set debug exception, only possibility is
guest executed ehpriv-1 privilege instruction and that's why we are
injecting program exception.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
[agraf: make deflect comment booke/book3s agnostic]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch synchronizes env->excp_vectors[] with env->iovr[].
This is required for using the existing interrupt injection mechanism
for kvm.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Get trap instruction opcode from KVM and this opcode will
be used for setting software breakpoint in following patch
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Useful for identifying the guest/host uniquely within the
guest. Adding following properties to the guest root node.
vm,uuid - uuid of the guest
host-model - Host model number
host-serial - Host machine serial number
hypervisor type - Tells its "kvm"
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements an NMI interface POWERPC SPAPR machine.
This enables an "nmi" HMP/QMP command supported on SPAPR.
This calls POWERPC_EXCP_RESET (vector 0x100) in the guest to deliver NMI
to every CPU. The expected result is XMON (in-kernel debugger) invocation.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PPC970 does not support VRMA (virtual RMA) so real memory required
for SLOF to execute must be allocated by the KVM_ALLOCATE_RMA ioctl.
Later this memory is used as a part of the guest RAM area.
The RMA allocating code also registers a memory region for this piece
of RAM.
We are going to simplify memory regions layout: RMA memory region
will be a subregion in the RAM memory region, both starting from zero.
This way we will not have to take care of start address alignment for
the piece of RAM next to the RMA.
This moves memory region business closer to the RAM memory region
creation/allocation code.
As this is a mechanical patch, no change in behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on non-kvm systems]
Signed-off-by: Alexander Graf <agraf@suse.de>
The number of threads per core is different for POWER6/7/8 CPUs.
Guest systems do not expect to see more threads per core than
a specific CPU supports so we need to limit this number.
This limit is implemented by ppc_get_compat_smt_threads().
However it has a problem as it checks for PCR (Processor Compatibility
Register) mask, 2.05 means 2 threads per core, 2.06 - 4 threads.
For POWER8 one would expect PCR_COMPAT_2_07 bit set and
ppc_get_compat_smt_threads() checking for it to return 8 threads
per core. But the latest PowerISA spec now is 2.07 and there is
no 2.07 compatibility mode defined, QEMU does not define it either
(will be in PowerISA 2.08).
Instead of relying on a PCR mask, this uses kvmppc_smt_threads()
which returns the maximum supported threads number for KVM or
1 for TCG.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
POWER8E is architecturally equal to POWER8 and POWER7+ is equal to
POWER7. Also no user space tool makes any difference for CPU node name
in the device tree (such as PowerPC,POWER7@0 vs. PowerPC,POWER7+@0).
So there is no point in emulating POWER7+ and POWER8E apart from POWER7
and POWER8. Also, the previos patch implemented multiple PVR mask support
per CPU class so POWER7 class now covers both POWER7 and POWER7+ CPUs,
same is valid for POWER8/8E.
This removes POWER7+ and POWER8E classes. This replaces references
to POWER7P/POWER8E families with POWER7/POWER8 families.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
So far it was enough to have a base PVR value and mask per CPU
family such as POWER7 or POWER8. However there CPUs which are
completely architecturally compatible but have different PVRs such
as POWER7/POWER7+ and POWER8/POWER8E. For these CPUs, top 16 bits
are CPU family and low 16 bits are the version. The families have
PVR base values different enough so defining a mask which
would cover both (or potentially more) CPUs within the family is
not possible.
This adds a pvr_match() callback to PowerPCCPUClass. The default
handler simply compares PVR defined in the class.
This implements ppc_pvr_match_power7/ppc_pvr_match_power8 callbacks
for POWER7/8 families. These check for POWER7/POWER7+ and POWER8/POWER8E.
This changes ppc_cpu_compare_class_pvr_mask() not to check masks but
use the pvr_match() callback.
Since all server CPUs use the same mask, this defines one mask
value - CPU_POWERPC_POWER_SERVER_MASK - which is used everywhere now.
This removes other mask definitions.
This removes pvr_mask from PowerPCCPUClass as it is not used anymore.
This removes pvr initialization for POWER7/8 families as it is not used
to find the class, the pvr_match() callback is used instead.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
We were truncating physical addresses to 32bit when using qemu-system-ppc
with a booke206 TLB implementation. This patch fixes that and makes the full
address space available.
Signed-off-by: Alexander Graf <agraf@suse.de>
The bswap that's needed for system mode isn't required for
user mode, and in fact breaks debugging.
Signed-off-by: Richard Henderson <rth@twiddle.net>
[agraf: fix apple gdbstub implementation]
Signed-off-by: Alexander Graf <agraf@suse.de>
The default, 970fx, doesn't support MSR_LE. So even though we set LE in
ppc_cpu_reset, it gets cleared again in hreg_store_msr. Error out if a
user-selected cpu model doesn't support LE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
[agraf: switch to POWER7 as default for BE and LE]
Signed-off-by: Alexander Graf <agraf@suse.de>
The device endianness is the cpu endianness at device reset time.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment QEMU knows about one version of POWER8 CPU with
PVR 0x4B.0000. This CPU class is defined as "POWER8". The linux
kernel names it as "POWER8E" which is different from the name QEMU uses.
Now we get another version of POWER8 which is architecturally equivalent
to POWER8E but has different PVR 0x4D.0000 so QEMU fails to find
a PPC CPU class on these machines. The linux kernel names these CPUs as
"POWER8".
This renames the existing "POWER8" to "POWER8E" to be more precise and
stay in sync with the linux kernel.
This adds a new "POWER8" family which calls POWER8E class init function
and defines own PVR mask (used to match a CPU class) and desc (used to
create dynamic version-less CPU class).
This does not change CPU class fw_name attribute as the host POWER8
firmware keeps using "PowerPC,POWER8" on both POWER8 and POWER8E.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The gen_qemu_ld8s() function is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove the definition of the IMM and d extract helpers; these seem to have
been added as part of the initial PPC support in 2003 but never actually
used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
POWER KVM supports an KVM_CAP_SPAPR_TCE capability which allows allocating
TCE tables in the host kernel memory and handle H_PUT_TCE requests
targeted to specific LIOBN (logical bus number) right in the host without
switching to QEMU. At the moment this is used for emulated devices only
and the handler only puts TCE to the table. If the in-kernel H_PUT_TCE
handler finds a LIOBN and corresponding table, it will put a TCE to
the table and complete hypercall execution. The user space will not be
notified.
Upcoming VFIO support is going to use the same sPAPRTCETable device class
so KVM_CAP_SPAPR_TCE is going to be used as well. That means that TCE
tables for VFIO are going to be allocated in the host as well.
However VFIO operates with real IOMMU tables and simple copying of
a TCE to the real hardware TCE table will not work as guest physical
to host physical address translation is requited.
So until the host kernel gets VFIO support for H_PUT_TCE, we better not
to register VFIO's TCE in the host.
This adds a place holder for KVM_CAP_SPAPR_TCE_VFIO capability. It is not
in upstream yet and being discussed so now it is always false which means
that in-kernel VFIO acceleration is not supported.
This adds a bool @vfio_accel flag to the sPAPRTCETable device telling
that sPAPRTCETable should not try allocating TCE table in the host kernel
for VFIO. The flag is false now as at the moment there is no VFIO.
This adds an vfio_accel parameter to spapr_tce_new_table(), the semantic
is the same. Since there is only emulated PCI and VIO now, the flag is set
to false. Upcoming VFIO support will set it to true.
This is a preparation patch so no change in behaviour is expected
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Apple gdbstub protocol is different from the normal gdbstub protocol
used on PowerPC. Add support for the different variant, so that we can use
Apple's gdb to debug guest code.
Keep in mind that the switch is a compile time option. We can't detect
during runtime whether a gdb connecting to us is an upstream gdb or an
Apple gdb.
Signed-off-by: Alexander Graf <agraf@suse.de>
Fixed bug in gen_mcrxr() in target-ppc/translate.c:
The XER[SO], XER[OV], and XER[CA] flags are stored in the least
significant bit (bit 0) of their respective registers. They need
to be shifted left (by their respective offsets) to generate the final
XER value. The old translation code for the 'mcrxr' instruction
was assuming that the flags are stored in bit 2, and was shifting them
right (incorrectly)
Signed-off-by: Sorav Bansal <sbansal@cse.iitd.ernet.in>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Decimal Floating Point is emulated, so add it the mask. This will
fix the erroneous message:
Warning: Disabling some instructions which are not emulated by TCG (0x0, 0x4)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
gcc reports a warning which is usually wrong:
target-ppc/dfp_helper.c: In function ‘dfp_get_digit’:
target-ppc/dfp_helper.c:417:1: warning:
control reaches end of non-void function [-Wreturn-type]
The compiler shows the warning if assert is not marked with the noreturn
attribute or if the code is compiled with -DNDEBUG.
Using g_assert_not_reached better documents the intention and does not
have these problems.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There were a few revisions of the Linux kernel that incorrectly swapped
the hcall instructions when they saw ePAPR compliant hypercalls.
We already have fixups for those in place when running with PR KVM, but
HV KVM and systems that don't implement hypercalls at all are still broken
because they fall back to the QEMU implementation of fallback hypercalls.
So let's make the fallback hypercall instruction path endian agnostic. This
only really works well for 64bit guests, but I don't think there are any 32bit
systems left that don't implement real pv hcall support, so we'll never get
into this code path.
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove the code that reduce the result to float32 as the frsqrte
instruction is defined to return a double-precision estimate of
the reciprocal square root.
Although reducing the fractional part is harmless (as the estimation
must have at least 12 bits of precision according to the old PEM),
reducing the exponent range is not correct.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
the H_SET_MODE, for POWER8 (PowerISA 2.07) only.
This defines AIL flags for LPCR special register.
This changes @excp_prefix according to the mode, takes effect in TCG.
This turns support of a new capability PPC2_ISA207S flag for TCG.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds DABRX SPR.
As DABR(X) are present in POWER CPUs till POWER7 only and POWER8 does not
have them (as it implements more powerful facility instead), this limits
DABR/DABRX registration by POWER7 (inclusive).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This hooks SPR with their "KVM set_one_reg" counterparts which enables
their migration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
POWER8 supports Event-Based Branch Facility (EBB). It is controlled via
set of SPRs access to which should generate an "Facility Unavailable"
interrupt if the facilities are not enabled in FSCR for problem state.
This adds EBB SPRs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds migration support for registers saved before Transactional
Memory (TM) transaction started.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds TM (Transactional Memory) SPRs.
This adds generic spr_read_prev_upper32()/spr_write_prev_upper32() to
handle upper half SPRs such as TEXASRU which is upper half of TEXASR.
Since this is not the only register like that and their numbers go
consequently, it makes sense to generalize the helpers.
This adds a gen_msr_facility_check() helper which purpose is to generate
the Facility Unavailable exception if the facility is disabled.
It is a copy of gen_fscr_facility_check() but it checks for enabled
facility in MSR rather than FSCR/HFSCR. It still sets the interrupt cause
in FSCR/HFSCR (whichever is passed to the helper).
This adds spr_read_tm/spr_write_tm/spr_read_tm_upper32/spr_write_tm_upper32
which are used for TM SPRs.
This adds TM-relates MSR bits definitions. This enables TM in POWER8 CPU class'
msr_mask.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds POWER8 specific PMU MMCR2/MMCRS SPRs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This makes user-privileged read/write fail if TAR facility is not enabled
in FSCR.
Since this is the very first check for enabled in FSCR facility,
this also adds gen_fscr_facility_check() for using in spr_write_tar()/
spr_read_tar().
This enables TAR in FSCR for user mode unconditionally.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds an FSCR (Facility Status and Control Register) SPR. This defines
names for FSCR bits.
This defines new exception type - POWERPC_EXCP_FU - "facility unavailable" (FU).
This registers an interrupt vector for it at 0xF60 as PowerISA defines.
This adds a TCG helper_fscr_facility_check() helper to raise an exception
if the facility is not enabled. It updates the interrupt cause field
in FSCR. This adds a TCG translation block generation code. The helper
may be used for HFSCR too as it has the same format.
The helper raising FU exceptions is not used by this patch but will be
in the next ones.
This adds gen_update_current_nip() to update NIP in DisasContext.
This helper is not used now and will be called before checking for
a condition for throwing an FU exception.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds TIR (Thread Identification Register) SPR first defined for server
CPUs in PowerISA 2.07.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This extends init_proc_book3s_64 to support POWER7 and POWER8.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This replaces gen_spr_7xx() call (which registers 32bit SPRs) with
gen_spr_book3s_pmu() call.
This removes SPR_7XX_PMC5/6 as they are for 32bit and gen_spr_book3s_pmu()
already registers correct PMC5/6 SPRs.
This removes explicit MMCRA registration as gen_spr_book3s_pmu() does it
anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This makes use of generic gen_spr_power5p_lpar() which registers LPCR SPR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This replaces VRSAVE registration and vscr_init() call with
gen_spr_book3s_altivec() which is generic and does the same thing if
insns_flags has PPC_ALTIVEC bit set (which POWER7/8 have set).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves SCFAR/DSCR/CTRL/PPR/PCR PRs to helpers. Later these helpers
will be called from generalized init_proc_book3s_64().
This switches init_proc_POWER7() to use generalized gen_spr_book3s_common()
which registers CRTL SPR under slightly different names. No change in
behaviour or non-debug output is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves TAR SPR to a helper. Later this helper will be
called from generalized init_proc_book3s_64().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves PIR/PURR/SPURR SPRs to helpers. Later these helpers will be
called from generalized init_proc_book3s_64().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This enabled PMU SPRs migration by hooking hypv privileged versions with
"KVM one reg" IDs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
After merging 970s into one class, check_pow_970() is used for all of them.
Since POWER5+ is no different in the matter of supported power modes,
let's use the same check_pow() callback for POWER5+ too,
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment every POWER CPU family has its own init_proc_POWERX function.
E500 already has common init function so we try to do the same thing.
This introduces BOOK3S_CPU_TYPE enum with 2 values - 970 and POWER5+.
This introduces generalized init_proc_book3s_64() which accepts a CPU type
as a parameter.
This uses new init function for 970 and POWER5+ CPU classes.
970 and POWER5+ use the same CPU class initialization except 3 things:
1. logical partitioning is controlled by LPCR (POWER5+) and HID4 (970)
SPRs;
2. 970 does not have EAR (External Access Register) SPR and PowerISA 2.03
defines one so keep it only for POWER5+;
3. POWER5+ does not have ALTIVEC so insns_flags does not have PPC_ALTIVEC
flag set and gen_spr_book3s_altivec() won't init ALTIVEC for POWER5+.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Previously LPCR was registered for the 970 class which was wrong as
it does not have LPCR. Instead, HID4 is used which this patch registers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Compared to PowerISA-compliant CPUs, 970 family has most of them plus
PMC7/8 which are only present on 970 but not on POWER5 and later CPUs.
Since we are changing SPRs for Book3s/970 families, let's add them too.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
MMCR0, MMCR1, MMCRA, PMC1..6, SIAR, SDAR are defined for 970 and PowerISA
CPUs. Since we are building common infrastructure for SPRs intialization
to share it between 970 and POWER5+/7/..., let's add missing SPRs to
the 970 family. Later rework of CPU class initialization will use those
for all PowerISA CPUs.
This adds new SPRs and enables writing to Uxxxx SPRs from supermode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since we started adding "POWER" prefix to 64bit PMU SPRs, let's finish
the transition and fix MMCRA and define a supermode version of it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This stops using 7xx common SPRs init function and adds separate set
of helpers for 970.
This does not copy ICTC SPR as neither 970 manual nor PowerISA mention it.
This defines 970/book3s PMU SPRs constants as they differs from the ones
used for 7XX.
This creates 2 helpers for PMU SPRs, one for supermode privileged SPRs and
one for user privileged SPRs as "sup" versions can be shared across
the family while "user" versions will behave different starting POWER8
(which will be addressed later).
This allows writing to Uxxxx SPRs from supermode. spr_write_ureg() is
implemented for this as a copy of already existing spr_read_ureg().
This allows writing to supervisor's SIAR - it used to be disabled
when gen_spr_7xx() was used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This changes UCTRL SPR to read from its supermode copy.
This enables reading from UCTRL in user mode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This splits one init_proc_970() into a set of small helpers. Later
init_proc_970() will be generalized and will call different set of helpers
depending on the current CPU class.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The differences between classes were:
1. SLB size, was 32 for 970 and 64 for others, should be 64 for all;
2. check_pow() callback, HID0 format is the same so should be the same
0x01C00000 which means "deep nap", "doze" and "nap" bits set;
3. LPCR - 970 does not have it but 970MP had one (by mistake).
This fixes wrong differences and makes one 970 class.
This fixes wrong registration of LPCR which is not present on 970.
This defines HID0 bits and uses them in check_pow_970().
This does not copy MSR_SHV (Hypervisor State, HV) bit from 970FX to
970 class as we do not emulate hypervisor in QEMU anyway.
This does not remove check_pow_970FX now as it is still used by POWER5+
class, this will be addressed later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
As defined in Linux kernel, PMC*, SIAR, MMCR0/1 have different numbers
for 32 and 64 bit POWERPC. We are going to support 64bit versions too so
let's rename 32bit ones to avoid confusion.
This is a mechanical patch so it does not fix obvious mistake with these
registers in POWER7 yet, this will be fixed later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix a temporary variable leak detected in the bctar instruction:
Opcode 13 10 11 (4d910460) leaked temporaries
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we have a lot of conditional code in the SPE emulation depending on
whether we have 64bit GPRs or not.
Unfortunately the assumption that we can just recycle the 64bit GPR
implementation is wrong. Normal SPE implementations maintain the upper 32 bits
on all non-SPE instructions which then only modify the low 32 bits. However
all instructions we model that adhere to the normal SF based switching don't
care whether they operate on 32 or 64 bit registers and just always use the full
64 bits.
So let's remove that dubious SPE optimization and revert everything to the same
code path the 32bit target code was taking. That way we get rid of differences
between the two implementations, but will get a slight performance hit when
emulating SPE instructions.
This fixes SPE emulation with qemu-system-ppc64 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
New kvm versions expose a PPC_FIXUP_HCALL capability. Make it visible to
machine code so we can take decisions based on it.
Signed-off-by: Alexander Graf <agraf@suse.de>
The SPE emulation code wants to access the highest 32bits of a 64bit register
and uses the andi TCG instruction for that. Unfortunately it masked with the
wrong mask. Fix the mask to actually cover the upper 32 bits.
This fixes simple multiplication tests with SPE guests for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
When we run 32bit guest CPUs (or 32bit guest code on 64bit CPUs) on
qemu-system-ppc64 the TLB lookup will use the full effective address
as pointer.
However, only the first 32bits are valid when MSR.CM = 0. Check for
that condition.
This makes QEMU boot an e500v2 guest with more than 1G of RAM for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Some modern tool chains use VSX instructions. Therefore attempt to enable the VSX MSR
bit by default, just like similar bits (FP, VEC, SPE, etc.).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows running PPC64 little-endian in user mode if target is configured
that way. In PPC64 LE user mode we set MSR.LE during initialization.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
A "mtspr SPRMMUCSR0, reg" always flushed TLB0,
because it passed the SPR number 0x3f4 to the flush routine.
But we want to flush either TLB0 or TBL1 depending on the GPR value.
Signed-off-by: Alex Zuepke <alexander.zuepke@hs-rm.de>
[agraf: change subject line, fix TCGv size mismatch]
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes window_size as it is basically a copy of nb_table
shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are
going to support windows as big as the entire RAM and this number
will be bigger that 32 capacity, we will have to do something
about @window_size anyway and removal seems to be the right way to go.
This removes dma_window_start/dma_window_size from sPAPRPHBState as
they are no longer used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently only single TCE entry per request is supported (H_PUT_TCE).
However PAPR+ specification allows multiple entry requests such as
H_PUT_TCE_INDIRECT and H_STUFF_TCE. Having less transitions to the host
kernel via ioctls, support of these calls can accelerate IOMMU operations.
This implements H_STUFF_TCE and H_PUT_TCE_INDIRECT.
This advertises "multi-tce" capability to the guest if the host kernel
supports it (KVM_CAP_SPAPR_MULTITCE) or guest is running in TCG mode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The popcntb instruction is erroneously encoded with opcode extension (opc1,opc2) = (0x03,0x03).
Bits 21-30 of popcntb are 122 = 0b00011-0b11010 and therefore this should be encoded
as (opc1,opc2) = (0x1A, 0x03).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The host kernel implements a KVM_REG_PPC_ARCH_COMPAT register which
this uses to enable a compatibility mode if any chosen.
This sets the KVM_REG_PPC_ARCH_COMPAT register in KVM. ppc_set_compat()
signals the caller if the mode cannot be enabled by the host kernel.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix TCG compat setting]
Signed-off-by: Alexander Graf <agraf@suse.de>
This puts a limit to the number of threads per core based on the current
compatibility mode. Although PowerISA specs do not specify the maximum
threads per core number, the linux guest still expects that
PowerISA2.05-compatible CPU supports only 2 threads per core as this
is what POWER6 (2.05 compliant CPU) implements, the same is for
POWER7 (2.06, 4 threads) and POWER8 (2.07, 8 threads).
This calls spapr_fixup_cpu_smt_dt() with the maximum allowed number of
threads which affects ibm,ppc-interrupt-server#s and
ibm,ppc-interrupt-gserver#s properties.
The number of CPU nodesremains unchanged.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This introduces PCR mask for supported compatibility modes.
This will be used later by the ibm,client-architecture-support call.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds basic support for the "compat" CPU option. By specifying
the compat property, the user can manually switch guest CPU mode from
"raw" to "architected".
This defines feature disable bits which are not used yet as, for example,
PowerISA 2.07 says if 2.06 mode is selected, the TM bit does not matter -
transactional memory (TM) will be disabled because 2.06 does not define
it at all. The same is true for VSX and 2.05 mode. So just setting a mode
must be ok.
This does not change the existing behavior as the actual compatibility
mode support is coming in next patches.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
PowerISA defines a compatibility mode for server POWERPC CPUs which
is supported by the PCR special register which is hypervisor privileged.
To support this mode for guests, SPAPR defines a set of virtual PVRs,
one per PowerISA spec version. When a hypervisor needs a guest to work in
a compatibility mode, it puts a virtual PVR value into @cpu-version
property of a CPU node.
This introduces a "compat" CPU option which defines maximal compatibility
mode enabled. The supported modes are power6/power7/power8.
This does not change the existing behaviour, new property will be used
by next patches.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
POWER7, POWER7+ and POWER8 families use the ILE bit of the LPCR
special purpose register to decide the endianness to use when
entering interrupt handlers. When running a Linux guest, this
provides a hint on the endianness used by the kernel. And when
it comes to dumping a guest, the information is needed to write
ELF headers using the kernel endianness.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[agraf: change subject line]
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix ppc64 arch specific dump code to support all combinations of little/big
endian hosts/guests. FWIW the current code is broken for altivec registers
when guest and host have a different endianness: these 128-bit registers
are written to guest memory as a two 64-bit entities and we should also swap
them.
Unit testing was done with the following program provided by Tom Musta:
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
int main(int argc, char** argv)
{
__uint128_t v = ((__uint128_t)0x0001020304050607ull << 64) |
0x08090a0b0c0d0e0full;
register void * vptr asm ("r11");
vptr = &v;
for(;;)
asm volatile ("lvx 30,0,11" );
}
When sending SIGABRT to this program and examining the core file, we get:
- ppc64 : 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- ppc64le: 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
We expect to find the very same layout in the QEMU dump since they are
real core files. This is what we get:
- ppc64 host, ppc64 guest : 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- ppc64 host, ppc64le guest : 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- x86_64 host, ppc64 guest : 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- x86_64 host, ppc64le guest: 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
We introduce a NoteFuncArg type to avoid adding extra arguments to all note
functions.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[ rebased on top of current master branch,
introduced NoteFuncArg,
use new cpu_to_dump{16,32,64} endian helpers,
fix altivec support,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows guests to have a different timebase origin from the host.
This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.
This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.
This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.
The feature must be present in the host kernel.
This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The dcbtls instruction is able to lock data inside the L1 cache.
Unfortunately we don't emulate any caches, so we have to tell the guest
that its locking attempt failed.
However, by implementing the instruction we at least don't give the
guest a program exception which it definitely does not expect.
Signed-off-by: Alexander Graf <agraf@suse.de>
There are 2 L1 cache control registers - one for data (L1CSR0) and
one for instructions (L1CSR1).
Emulate both of them well enough to give the guest the illusion that
it could actually do anything about its caches.
Signed-off-by: Alexander Graf <agraf@suse.de>
In addition to the L1 data cache configuration register L1CFG0 there is
also another one for the L1 instruction cache called L1CFG1.
Emulate that one with the same values as the data one.
Signed-off-by: Alexander Graf <agraf@suse.de>
The L1CFG0 register on e200 and e500 is "User RO" according to the
specifications. So let's make it user readable and world unwritable.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our pre-e500mc e500 CPU types didn't get instanciated with SVR information,
even though those systems do support the SVR register.
Spawn them with the SVR tag so that they don't get confused when someone tries
to read SPR_SVR.
Signed-off-by: Alexander Graf <agraf@suse.de>
When QEMU gets compiled with --enable-debug-tcg we can check for temporary
leakage. Implement the necessary target code for this and fail emulation
when we hit a leakage.
This hopefully ensures that we don't get new leaks.
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to make sure that every instruction cleans up after itself and
clears every temporary it allocated.
While checking whether this is already the case, I came across a few
cases where it isn't. This patch fixes every translation I found that
doesn't free their allocated temporaries.
Signed-off-by: Alexander Graf <agraf@suse.de>
When we select a CPU type that does not support 1TB segments, we should
not expose 1TB just because KVM supports 1TB segments. User configuration
always wins over feature availability.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch refactors the PowerPC Advanced Encryption Standard (AES) instructions
to use the common AES tables (include/qemu/aes.h).
Specifically:
- vsbox is recoded to use the AES_sbox table.
- vcipher, vcipherlast and vncipherlast are all recoded to use the optimized
AES_t[ed][0-4] tables.
- vncipher is recoded to use a combination of InvS-Box, InvShiftRows and
InvMixColumns tables. It was not possible to use AES_Td[0-4] due to a
slight difference in how PowerPC implements vncipher.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Shift Significand
Left Immediate (dscli[q][.]) and DFP Shift Significant Right Immediate
(dscri[q][.]) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Insert Biased
Exponent instructions diex[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Extract
Biased Exponent instructions dxex[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Encode Binary
Coded Decimal to Densely Packed Decimal instructions denbcd[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the Power PC Decimal Floating Point Decode
Densely Packed Decimal to Binary Coded Decimal instructions
ddedpd[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Convert to Fixed
instructions dctfix[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Convert to
Fixed instructions dctfix[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Round to DFP Short (drsp[.]) and Round to
DFP Long (drdpq[.]) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Convert to DFP Long (dctdp[.]) and
Convert to DFP Extended (dctqpq[.]) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point (DFP) Round
to FP Integer With Inexact (drintx[q][.]) and DFP Round to FP
Integer Without Inexact (drintn[q][.]) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Reround instructions
drrnd[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Quantize instructions
dquai[q][.] and dqua[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Test Significance
instructions dtstsf[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Test Exponent
instructions dtstex[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Test Data
Group instructions dtstdg[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Test Data Class
instructions dtstdc[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Compare instructions
dcmpu[q] and dcmpo[q].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Divide instructions
ddiv[q][.]
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Multiply instructions
dmul[q][.]
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Subtract instructions
dsub[q][.]
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Add instructions dadd[q][.]
Various GCC unused annotations are removed since it is now safe to remove them.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: move brace in function definition]
Signed-off-by: Alexander Graf <agraf@suse.de>
Add post-processing utilities to the PowerPC Decimal Floating Point
(DFP) helper code. Post-processors are small routines that execute
after a preliminary DFP result is computed. They are used, among other
things, to compute status bits.
This change defines a function type for post processors as well as a
generic routine to run a list (array) of post-processors.
Actual post-processor implementations will be added as needed by specific
DFP helpers in subsequent changes.
Some routines are annotated with the GCC unused attribute in order to
preserve build bisection. The annotation will be removed in subsequent
patches.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a new file (dfp_helper.c) to the PowerPC implementation for Decimal Floating
Point (DFP) emulation. This first version of the file declares a structure that
will be used by DFP helpers. It also implements utilities that will initialize
such a structure for either a long (64 bit) DFP instruction or an extended (128
bit, aka "quad") instruction.
Some utility functions are annotated with the unused attribute in order to preserve
build bisection.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: Add never reached assert on dfp_prepare_rounding_mode()]
Signed-off-by: Alexander Graf <agraf@suse.de>
Add decoder macros for the various Decimal Floating Point
instruction forms. Illegal instruction masks are used to not only
guard against reserved instruction field use, but also to catch
illegal quad word forms that use odd-numbered floating point registers.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add general support for generators of PowerPC Decimal Floating Point helpers.
Some utilities are annotated with GCC attribute unused in order to preserve
build bisection. These annotations will be removed in later patches.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Define a floating pointer register pointer type in the PowerPC
helper header. The type will be used to pass FPR register operands
to Decimal Floating Point (DFP) helpers. A pointer is used because
the quad word forms of PowerPC DFP instructions operate on adjacent
pairs of floating point registers and thus can be thought of as
arrays of length 2.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently migration fails if CPU version (PVR register) is different
even a bit. This check is performed at the very end of migration when
device states are sent. This is too late for management software and
we need to provide a way for the user to make sure that migration
will succeed if QEMU is started with appropritate command line parameters.
This removes the PVR check.
This resets PVR to the default value as the existing VMSTATE record
for SPR array sends all 1024 registers unconditionally and overwrites
the destination PVR.
If the user wants some guarantees for migration to succeed, then
a CPU name or "host" CPU with a "compat" option (on its way to upsteam)
should be used and KVM or TCG is expected to fail on unsupported values
at the moment of QEMU start.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use MSR mnemonics from cpu.h instead of magic numbers for the CPUPPCState.msr_mask
initialization.
There is one bit in the 401x2 (and subsequent) model that I could not find any
documentation for. It is open coded at little endian bit position 20:
pcc->msr_mask = (1ull << 20) |
(1ull << MSR_KEY) |
(1ull << MSR_POW) |
(1ull << MSR_CE) |
...
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment there are 3 versions of POWER7 CPUs defined. However
we do not emulate these CPUs diffent and it does not make much
sense to keep them all.
This removes POWER7_v2.0 and POWER7_v2.1 and leaves just one versioned
CPU per family which is POWER7_v2.3 with POWER7 alias.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves aliases lookup after CPU class lookup. This is to let new generic
CPU to be found first if it is present and only if it is not (TCG case), use
aliases.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment generic version-less CPUs are supported via hardcoded aliases.
For example, POWER7 is an alias for POWER7_v2.1. So when QEMU is started
with -cpu POWER7, the POWER7_v2.1 class instance is created.
This approach works for TCG and KVMs other than HV KVM. HV KVM cannot emulate
PVR value so the guest always sees the real PVR. HV KVM will not allow setting
PVR other that the host PVR because of that (the kernel patch for it is on
its way). So in most cases it is impossible to run QEMU with -cpu POWER7
unless the host PVR is exactly the same as the one from the alias (which
is now POWER7_v2.3). It was decided that under HV KVM QEMU should use
-cpu host.
Using "host" CPU type creates a problem for management tools such as libvirt
because they want to know in advance if the destination guest can possibly
run on the destination. Since the "host" type is really not a type and will
always work with any KVM, there is no way for libvirt to know if the migration
will success.
This registers additional CPU class derived from the host CPU family.
The name for it is taken from @desc field of the CPU family class.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch allows registers to be properly read from and written to
when using the gdbstub to debug a ppc guest running in little
endian mode.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch extracts the method to determine a register's size
into a separate function.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They do not need to be in op_helper.c. Because cputlb.c now includes
softmmu_template.h twice for each size, io_readX must be elided the
second time through.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h. This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
On the x86, some devices need access to the CPU reset pin (INIT#).
Provide a generic service to do this, using one of the internal
cpu_interrupt targets. Generalize the PPC-specific code for
CPU_INTERRUPT_RESET to other targets.
Since PPC does not support migration across QEMU versions (its
machine types are not versioned yet), I picked the value that
is used on x86, CPU_INTERRUPT_TGT_INT_1. Consequently, TGT_INT_2
and TGT_INT_3 are shifted down by one while keeping their value.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have a CPU object with a reset method, it is better to
keep the KVM reset close to the CPU reset. Using qemu_register_reset
as we do now keeps them far apart.
With this patch, PPC no longer calls the kvm_arch_ function, so
it can get removed there. Other arches call it from their CPU
reset handler, and the function gets an ARMCPU/X86CPU/S390CPU.
Note that ARM- and s390-specific functions are called kvm_arm_*
and kvm_s390_*, while x86-specific functions are called kvm_arch_*.
That follows the convention used by the different architectures.
Changing that is the topic of a separate patch.
Reviewed-by: Gleb Natapov <gnatapov@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert existing users of KVM_ENABLE_CAP to new helper.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Book3s_64 guests expect the L1 cache size in device tree, so let's give
them proper values for all CPU types we support.
This fixes a "not compliant" warning with sles11 guests on -M pseries for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
We were entering the power saving state even when interrupts (like an
external interrupt or a decrementer interrupt) were still in flight.
In case we find a pending interrupt, don't enter power saving state.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Tom Musta <tmusta@gmail.com>
There are 3 different variants of the decrementor for BookE and BookS.
The BookE variant sets TSR[DIS] to 1 when the DEC value becomes 1 or 0. TSR[DIS]
is then the indicator whether the decrementor interrupt line is asserted or not.
The old BookS variant treats DEC as an edge interrupt that gets triggered when
the DEC value's top bit turns 1 from 0.
The new BookS variant maintains the assertion bit inside DEC itself. Whenever
the DEC value becomes negative (top bit set) the DEC interrupt line is asserted.
So far we implemented mostly the old BookS variant. Let's do them all properly.
This fixes booting pseries ppc64 guest images in TCG mode for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch corrects the VSX integer to floating point conversion instructions
by using the endian correct accessors. The auxiliary "j" index used by the
existing macros is now obsolete and is removed. The JOFFSET preprocessor
macro is also obsolete and removed.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch corrects the VSX floating point to integer conversion
instructions by using the endian correct accessors. The auxiliary
"j" index used by the existing macros is now obsolete and is removed.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This change corrects the VSX double precision to single precision and
single precision to double precisions conversion routines. The endian
correct accessors are now used. The auxiliary "j" index is no longer
necessary and is eliminated.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This change fixes the VSX scalar compare instructions. The existing usage of "x.f64[0]"
is changed to "x.VsrD(0)".
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
A common pattern in the VSX helper code macros is the use of "x.fld[i]" where
"x" is a VSR and "fld" is an argument to a macro ("f64" or "f32" is passed).
This is not always correct on LE hosts.
This change addresses all instances of this pattern to be "x.fld" where "fld" is:
- "VsrD(0)" for scalar instructions accessing 64-bit numbers
- "VsrD(i)" for vector instructions accessing 64-bit numbers
- "VsrW(i)" for vector instructions accessing 32-bit numbers
Note that there are no instances of this pattern where a scalar instruction
accesses a 32-bit number.
Note also that it would be correct to use "VsrD(i)" for scalar instructions since
the loop index is only ever "0". I have choosen to use "VsrD(0)" instead ... it
seems a little clearer.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This change properly orders the doublewords of the VSRs 0-31. Because these
registers are constructed from separate doublewords, they must be inverted
on Little Endian hosts. The inversion is performed both when the VSR is read
and when it is written.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This change defines accessors for VSR doubleword and word fields that
are correct from a host Endian perspective. This allows code to
use the Power ISA indexing numbers in code.
For example, the xscvdpsxws instruction has a target VSR that looks
like this:
0 32 64 127
+-----------+--------+-----------+-----------+
| undefined | SW | undefined | undefined |
+-----------+--------+-----------+-----------+
VSX helper code will use VsrW(1) to access this field.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The various VSX Convert to Integer instructions should truncate the
floating point number to an integer value, which is equivalent to
a round-to-zero rounding mode. The existing VSX floating point to
integer conversion helpers are erroneously using the rounding mode set
int the PowerPC Floating Point Status and Control Register (FPSCR).
This change corrects this defect by using the appropriate
float*_to_*_round_to_zero() routines fro the softfloat library.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove MSR_POW from the msr_mask for POWER7/7P/8.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Without MSR_VSX we die early during a Linux boot.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add PPC_ISEL to insns_flags.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add MSR_LE to the msr_mask for POWER8.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This flag will be used to decide whether to emulate some bits of
H_SET_MODE hypercall because some are POWER8-only.
While we are here, add 2.05 flag to POWER8 family too. POWER7/7+ already
have it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
PowerPC kernel expects the number of SMT threads in a core to be a power
of 2. Since QEMU doesn't enforce this, it leads to an early guest kernel
crash if invalid threads count is specified.
Prevent this crash and make it a graceful exit from QEMU itself by
validating the user-supplied threads count.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
create_new_table() should allocate 0x20 opc_handler_t pointers, but
actually allocates 0x20 opc_handler_t structs. Fix this.
Signed-off-by: Stuart Brady <sdb@zubnet.me.uk>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This resets SPR values to defaults on CPU reset. This should help
with little-endian guests reboot issues.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Codespell found and fixed these new typos:
* doesnt -> doesn't
* funtion -> function
* perfomance -> performance
* remaing -> remaining
A coding style issue (line too long) was fixed manually.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
All targets using it gain the ability to set -cpu name,key=value,...
options via the default TYPE_CPU CPUClass::parse_features() implementation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Default to false.
Tidy variable naming and inline cast uses while at it.
Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commits fdfba1a298,
ab1da85791,
f606604f1c and
2c17449b30 added usages of ENV_GET_CPU()
macro in target-specific code.
Use ppc_env_get_cpu() instead.
Cc: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This makes use of @cpu_dt_id and related API in:
1. emulated XICS hypercall handlers as they receive fixed CPU indexes;
2. XICS-KVM to enable in-kernel XICS on right CPU;
3. device-tree renderer.
This removes @cpu_index fixup as @cpu_dt_id is used instead so QEMU monitor
can accept command-line CPU indexes again.
This changes kvm_arch_vcpu_id() to use ppc_get_vcpu_dt_id() as at the moment
KVM CPU id and device tree ID are calculated using the same algorithm.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Normally CPUState::cpu_index is used to pick the right CPU for various
operations. However default consecutive numbering does not always work
for POWERPC.
These indexes are reflected in /proc/device-tree/cpus/PowerPC,POWER7@XX
and used to call KVM VCPU's ioctls. In order to achieve this,
kvmppc_fixup_cpu() was introduced. Roughly speaking, it multiplies
cpu_index by the number of threads per core.
This approach has disadvantages such as:
1. NUMA configuration stays broken after the fixup;
2. CPU-targeted commands from the QEMU Monitor do not work properly as
CPU indexes have been fixed and there is no clear way for the user to
know what the new CPU indexes are.
This introduces a @cpu_dt_id field in the CPUPPCState struct which
is initialized from @cpu_index by default and can be fixed later
to meet the device tree requirements.
This adds an API to handle @cpu_dt_id.
This removes kvmppc_fixup_cpu() as it is not more needed, @cpu_dt_id
is calculated in ppc_cpu_realize().
This will be used later in machine code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This support updating htab managed by the hypervisor. Currently we don't have
any user for this feature. This actually bring the store_hpte interface
in-line with the load_hpte one. We may want to use this when we want to
emulate henter hcall in qemu for HV kvm.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ folded fix for the "warn_unused_result" build break in
kvmppc_hash64_write_pte(), Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For updating in kernel htab we need to provide both pte0 and pte1, hence update
the interface to take pte0 and pte1 together
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ ldq_phys() API change, Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
With kvm enabled, we store the hash page table information in the hypervisor.
Use ioctl to read the htab contents. Without this we get the below error when
trying to read the guest address
(gdb) x/10 do_fork
0xc000000000098660 <do_fork>: Cannot access memory at address 0xc000000000098660
(gdb)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ fixes for 32 bit build (casts!), ldq_phys() API change,
Greg Kurz <gkurz@linux.vnet.ibm.com ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Correctly update the htab_mask using the return value of
KVM_PPC_ALLOCATE_HTAB ioctl. Also we don't update sdr1
on GET_SREGS for HV. We check for external htab and if
found true, we don't need to update sdr1
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ fixed pte group offset computation in ppc_hash64_htab_lookup() that
caused TCG to fail, Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Per Alex Graf's suggestion, the recently added case to gen_conditional_store
for stqcx should use an additional temporary when accessing the second
doubleword. This avoids the mutation of the EA argument to the function,
which is counter intuitive.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch fixes 64 bit constants that were erroneously declared as "ul" instead of
"ull". The preferred form "ULL" is used.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
64 bit constants need the "ULL" suffix, not just "UL", because
on 32 bit platforms 'long' is not large enough and this will
cause a compiler warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Permuate and Exclusive OR (vpermxor)
instruction introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector SHA Sigma instructions introduced in Power
ISA Version 2.07:
- Vector SHA-512 Sigma Doubleword (vshasigmad)
- Vector SHA-256 Sigma Word (vshasigmaw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector AES instructions introduced in Power ISA
Version 2.07:
- Vector AES Cipher (vcipher)
- Vector AES Cipher Last (vcipherlast)
- Vector AES Inverse Cipher (vncipher)
- Vector AES Inverse Cipher Last (vncipherlast)
- Vector AES SubBytes (vsbox)
Note that the implementation of vncipher deviates from the RTL in
ISA V2.07. However it does match the verbal description in the
third paragraph. The RTL will be fixed in ISA V2.07B. The
implementation here has been tested against actual P8 hardware.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add the Binary Coded Decimal instructions bcdadd. and
bcdsub.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vectory Polynomial Multiply Sum instructions
introduced in Power ISA Version 2.07:
- Vectory Polynomial Multiply Sum Byte (vpmsumb)
- Vectory Polynomial Multiply Sum Halfword (vpmsumh)
- Vectory Polynomial Multiply Sum Word (vpmsumw)
- Vectory Polynomial Multiply Sum Doubleword (vpmsumd)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Gather Bits by Bytes Doubleword (vgbbd)
instruction which is introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Compare Doubleword instructions introduced
by Power ISA Version 2.07:
- Vector Compare Equal to Unsigned Doubleword (vcmpequd)
- Vector Compare Greater Than Signed Doubleword (vcmpgtsd)
- Vector Compare Greater Than Unsigned Doubleword (vcmpgtud)
These instructions are encoded with bit 31 set to 1 and so are duals with
vcmpeqfp, vcmpgtfp and vcmpbfp respectively.
The helper macro for integer compares is enhanced to account for 64-bit
operands.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Bit Permute Quadword (vbpermq) instruction
introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the vector doublword rotate and shift instructions
introduced in Power ISA Version 2.07:
- Vector Rotate Left Doubleword instruction (vrld)
- Vector Shift Left Doubleword (vsld)
- Vector Shift Right Doubleword (vsrd)
- Vector Shift Right Algegbraic Doubleword (vsrad)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Existing code in the VROTATE, VSL and VSR macros for the Altivec rotate and shift
helpers uses a formula to compute a bit mask used to extract the rotate/shift
amount from the VRB register. What is desired is:
mask = (1 << (3 + log2(sizeof(element)))) - 1
but what is implemented is:
mask = (1 << (3 + (sizeof(element)/2))) - 1
This produces correct answers when "element" is uint8_t, uint16_t or uint_32t. But
it breaks down when element is uint64_t.
This patch corrects the situation. Since the mask is known at compile time, the
macros are changed to simply accept the mask as an argument.
Subsequent patches in this series will add double-word variants of rotates and
shifts and thus take advantage of this fix.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Merge Even Word (vmrgew) and Vector
Merge Odd Word (vmrgow) instructions introduced in Power ISA
Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Unpack Signed Word instructions introduced in
Power ISA Version 2.07:
- Vector Unpack High Signed Word (vupkusw)
- Vector Unpack Low Signed Word (vupklsw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Pack Doubleword instructions introduced in
Power ISA Version 2.07:
- Vector Pack Signed Doubleword Signed Saturate (vpksdss)
- Vector Pack Signed Doubleword Unsigned Saturate (vpksdus)
- Vector Pack Unsigned Doubleword Unsigned Modulo (vpkudum)
- Vector Pack Unsigned Doubleword Unsigned Saturate (vpkudus)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Minimum and Maximum Doubleword instructions
that are introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Population Count instructions introduced in Power
ISA Version 2.07: vpopcntb, vpopcnth, vpopcntw and vpopcntd.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Count Leading Zeroes instructions introduced
in Power ISA Version 2.07 - vclzb, vclzh, vclzw and vclzd.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Multiply Unsigned Word Modulo (vmuluwm)
instruction.
The existing VARITH_DO macro is re-used to (trivially) instantiate
the helper code.
Since bits 21-31 of any vmuluwm instruction is 137, the instruction
is coded as a dual to vmulouw (bits 21-31 = 136).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Multilpy Even/Odd Word instructions that are introduced
in Power ISA Version 2.07:
- Vector Multiply Even Unsigned Word (vmuleuw)
- Vector Multiply Even Signed Word (vmulesw)
- Vector Multiply Odd Unsigned Word (vmulouw)
- Vector Multiply Odd Signed Word (vmulosw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This VMUL_DO macro provides support for the various vmule* and vmulo*
instructions. These instructions multiply vector elements, producing
products that are one size larger; e.g. vmuleub multiplies unsigned 8-bit
elements and produces a 16 bit unsigned element.
The existing macro works correctly for the existing instructions (8-bit,
and 16-bit source elements) but does not work correctly for 32-bit
source elements.
This patch adds an explicit cast to the multiplicands, forcing them to be
of the target element type. This is required for the forthcoming patches
that add the vmul[eo][us]w instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds two Altivec unsigned doublword modulo instructions that
are introduced in Power ISA Version V2.07:
- vaddudm : Vector Add Unsigned Doubleword Modulo
- vsubudm : Vector Subtrace Unsigned Doubleword Modulo
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Logical Instructions that are introduced
in Power ISA Version 2.07: veqv, vnand and vorc.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some Alitvec instructions introduced in Power ISA Version 2.07 use bit 31
(aka the "Rc" bit) as an opcode but also use bit 21 as an actual Rc
bit. QEMU for PowerPC typically uses bits 0-5 and 21-30 for opcodes.
This patch introduces a generator macro that injects an auxiliary handler
which decodes both bits 21 and 31 and invokes one of four standard
handlers. Since the instructions are not, in general, from the same version
of the ISA, two sets of PPC_*/PPC2_* flags are supported.
This patch also introduces a macro to insert two entries into the opcode
table -- one for bit 21 equal to 0 and one for bit 21 equal to 1.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a macro to insert an entry into the opcode table for Altivec
Power ISA Version 2.07 instructions. The macro is similar to the GEN_VXFORM macro
except that it tags the entry with the PPC2_ALTIVEC_207 flag rather than
PPC_ALTIVEC.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some Alitvec instructions introduced in Power ISA Version 2.07 use bit 31
(aka the "Rc" bit) as an opcode bit. However, QEMU for PowerPC uses
bits 0-5 and 21-30 for opcodes and not bit 31.
This patch introduces macros that will handle this situation by injecting
an auxiliary handler which decodes bit 31 in invokes one of two standard
handlers. Since the instructions are not, in general, from the same version
of the ISA, two sets of PPC_*/PPC2_* instruction tags are supported.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds generator macro for Altivec instructions that have 3
source AVR operands. The macro is similar to the 2 operand form.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch updates the ppc_avr_t data structure to include elements for
signed 64-bit integers and (conditionally) unsigned 128 bit integers.
These elements will be in instructions models later on in this patch series.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag that will be used to tag the Altivec instructions
introduced in Power ISA Version 2.07.
The flag is added to Power8 model since P8 supports these instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store Quadword Conditionl (stqcx.) instruction
which is introduced in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix compile error when !TARGET_PPC64]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load Quadword and Reserve (lqarx) instruction,
which is new in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for the Store Quadword instruction in user mode. Prior
to Power ISA 2.07, stq was legal only in privileged mode. Support for Little
Endian mode is also new in ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Book I (user space) Load Quadword (lq) instruction.
This instruction was introduced into Book I in Power ISA V2.07. Previous
versions of the architecture supported this as a privileged instruction.
Previous versions of the architecture also did not support Little Endian
mode.
Note that this patch also adds the PPC_64BX flag to the Power8 model,
which enables the lq instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a boolean function is_user_mode that can be re-used
in translation code that is sensitive to the MSR[PR] (user-mode)
state.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag to identify the load/store quadword instructions
that are introduced with Power ISA 2.07.
The flag is added to the Power8 model since P8 supports these
instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Branch Conditional to Address Register (bctar)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for the Target Address Register (TAR) to the Power8
model.
Because supported SPRs are typically identified in an init_proc_*()
function and because the Power8 model is currently just using the
init_proc_POWER7() function, a new init_proc_POWER8() function
is added and plugged into the P8 model.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
