Commit Graph

1889 Commits

Author SHA1 Message Date
Richard Henderson
cd7d3cb7a2 tcg/arm: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson
41b70f220b tcg/riscv: enable dynamic TLB sizing
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:24 -08:00
Richard Henderson
4f47e338f6 tcg/s390: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson
17ff9f7801 tcg/sparc: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson
644f591ab0 tcg/ppc: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson
f7bcd96669 tcg/aarch64: enable dynamic TLB sizing
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Emilio G. Cota
54eaf40b8f tcg/i386: enable dynamic TLB sizing
As the following experiments show, this series is a net perf gain,
particularly for memory-heavy workloads. Experiments are run on an
Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz.

1. System boot + shudown, debian aarch64:

- Before (v3.1.0):
 Performance counter stats for './die.sh v3.1.0' (10 runs):

       9019.797015      task-clock (msec)         #    0.993 CPUs utilized            ( +-  0.23% )
    29,910,312,379      cycles                    #    3.316 GHz                      ( +-  0.14% )
    54,699,252,014      instructions              #    1.83  insn per cycle           ( +-  0.08% )
    10,061,951,686      branches                  # 1115.541 M/sec                    ( +-  0.08% )
       172,966,530      branch-misses             #    1.72% of all branches          ( +-  0.07% )

       9.084039051 seconds time elapsed                                          ( +-  0.23% )

- After:
 Performance counter stats for './die.sh tlb-dyn-v5' (10 runs):

       8624.084842      task-clock (msec)         #    0.993 CPUs utilized            ( +-  0.23% )
    28,556,123,404      cycles                    #    3.311 GHz                      ( +-  0.13% )
    51,755,089,512      instructions              #    1.81  insn per cycle           ( +-  0.05% )
     9,526,513,946      branches                  # 1104.641 M/sec                    ( +-  0.05% )
       166,578,509      branch-misses             #    1.75% of all branches          ( +-  0.19% )

       8.680540350 seconds time elapsed                                          ( +-  0.24% )

That is, a 4.4% perf increase.

2. System boot + shutdown, ubuntu 18.04 x86_64:

- Before (v3.1.0):
      56100.574751      task-clock (msec)         #    1.016 CPUs utilized            ( +-  4.81% )
   200,745,466,128      cycles                    #    3.578 GHz                      ( +-  5.24% )
   431,949,100,608      instructions              #    2.15  insn per cycle           ( +-  5.65% )
    77,502,383,330      branches                  # 1381.490 M/sec                    ( +-  6.18% )
       844,681,191      branch-misses             #    1.09% of all branches          ( +-  3.82% )

      55.221556378 seconds time elapsed                                          ( +-  5.01% )

- After:
      56603.419540      task-clock (msec)         #    1.019 CPUs utilized            ( +- 10.19% )
   202,217,930,479      cycles                    #    3.573 GHz                      ( +- 10.69% )
   439,336,291,626      instructions              #    2.17  insn per cycle           ( +- 14.14% )
    80,538,357,447      branches                  # 1422.853 M/sec                    ( +- 16.09% )
       776,321,622      branch-misses             #    0.96% of all branches          ( +-  3.77% )

      55.549661409 seconds time elapsed                                          ( +- 10.44% )

No improvement (within noise range). Note that for this workload,
increasing the time window too much can lead to perf degradation,
since it flushes the TLB *very* frequently.

3. x86_64 SPEC06int:

           x86_64-softmmu speedup vs. v3.1.0 for SPEC06int (test set)
            Host: Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz (Skylake)

5.5 +------------------------------------------------------------------------+
    |                   +-+                                                  |
  5 |-+.................+-+...............................tlb-dyn-v5.......+-|
    |                   * *                                                  |
4.5 |-+.................*.*................................................+-|
    |                   * *                                                  |
  4 |-+.................*.*................................................+-|
    |                   * *                                                  |
3.5 |-+.................*.*................................................+-|
    |                   * *                                                  |
  3 |-+......+-+*.......*.*................................................+-|
    |        *  *       * *                                                  |
2.5 |-+......*..*.......*.*.................................+-+*...........+-|
    |        *  *       * *                                 *  *             |
  2 |-+......*..*.......*.*.................................*..*...........+-|
    |        *  *       * *                                 *  *  +-+        |
1.5 |-+......*..*.......*.*.................................*..*.*+-+.*+-+.+-|
    |        *  * *+-+  * *  +-+       *+-+  +-+       +-+  *  * *  * *  *   |
  1 |++++-+*+*++*+*++*++*+*++*+*+++-+*+*+-++*+-++++-++++-+++*++*+*++*+*++*+++|
    |   *  * *  * *  *  * *  * *  *  * *  * *  *  * *  * *  *  * *  * *  *   |
0.5 +------------------------------------------------------------------------+
  400.perlb401.bzip403.g429445.g456.hm462.libq464.h471.omn47483.xalancbgeomean
  png: https://imgur.com/YRF90f7

That is, a 1.51x average speedup over the baseline, with a max speedup
of 5.17x.

Here's a different look at the SPEC06int results, using KVM as the baseline:

             x86_64-softmmu slowdown vs. KVM for SPEC06int (test set)
             Host: Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz (Skylake)

25 +---------------------------------------------------------------------------+
   |                   +-+                                        +-+          |
   |                   * *                             +-+      v3.1.0         |
   |                   * *                             +-+  tlb-dyn-v5         |
   |                   * *                             * *        +-+          |
20 |-+.................*.*.............................*.+-+......*.*........+-|
   |                   * *                             * # #      * *          |
   |        +-+        * *                             * # #      * *          |
   |        * *        * *                             * # #      * *          |
15 |-+......*.*........*.*.............................*.#.#......*.+-+......+-|
   |        * *        * *                             * # #      * #|#        |
   |        * *        * *        +-+                  * # #      * +-+        |
   |        * *  +-+   * *        ++-+       +-+       * # #      * # # +-+    |
   |        * *  +-+   * *        * ##       *|   +-+  * # #      * # # +-+    |
10 |-+......*.*..*.+-+.*.*........*.##.......++-+.*.+-+*.#.#......*.#.#.*.*..+-|
   |        * *  * +-+ * *        * ## +-+   *# # * # #* # # +-+  * # # * *    |
   |        * *  * # # * *  +-+   * ## * +-+ *# # * # #* # # * *  * # # *+-+   |
   |        * *  * # # * *  * +-+ * ## * # # *# # * # #* # # * *  * # # * ##   |
 5 |-+......*.+-+*.#.#.*.*..*.#.#.*.##.*.#.#.*#.#.*.#.#*.#.#.*.*..*.#.#.*.##.+-|
   |        * # #* # # * +-+* # # * ## * # # *# # * # #* # # * *  * # # * ##   |
   |        * # #* # # * # #* # # * ## * # # *# # * # #* # # * +-+* # # * ##   |
   |   ++-+ * # #* # # * # #* # # * ## * # # *# # * # #* # # * # #* # # * ##   |
   |+++*#+#+*+#+#*+#+#+*+#+#*+#+#+*+##+*+#+#+*#+#+*+#+#*+#+#+*+#+#*+#+#+*+##+++|
 0 +---------------------------------------------------------------------------+
 400.perlbe401.bzi403.gc429445.go456.h462.libqu464.h471.omne4483.xalancbmgeomean
  png: https://imgur.com/YzAMNEV

After this series, we bring down the average SPEC06int slowdown vs KVM
from 11.47x to 7.58x.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-4-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Emilio G. Cota
86e1eff8bc tcg: introduce dynamic TLB sizing
Disabled in all TCG backends for now.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
93f332a503 tcg/aarch64: Implement vector minmax arithmetic
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
d32648d445 tcg/aarch64: Implement vector saturating arithmetic
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
bc37faf4cb tcg/i386: Implement vector minmax arithmetic
The avx instruction set does not directly provide MO_64.
We can still implement 64-bit with comparison and vpblendvb.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
8ffafbcec2 tcg/i386: Implement vector saturating arithmetic
Only MO_8 and MO_16 are implemented, since that's all the
instruction set provides.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
44f1441dbe tcg/i386: Split subroutines out of tcg_expand_vec_op
This routine was becoming too large.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
dd0a0fcdd8 tcg: Add opcodes for vector minmax arithmetic
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
8afaf05066 tcg: Add opcodes for vector saturated arithmetic
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
5d6acdd4a4 tcg: Add write_aofs to GVecGen4
This allows writing 2 output, 3 input operations.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
f550805d83 tcg: Add gvec expanders for nand, nor, eqv
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson
9a9eda78e4 tcg: Add logical simplifications during gvec expand
We handle many of these during integer expansion, and the
rest of them during integer optimization.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Paolo Bonzini
7d37435bd5 avoid TABs in files that only contain a few
Most files that have TABs only contain a handful of them.  Change
them to spaces so that we don't confuse people.

disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line.  Many of them
have a majority of TABs, or were initially committed with all tabs.

    bsd-user/i386/target_syscall.h
    bsd-user/x86_64/target_syscall.h
    crypto/aes.c
    hw/audio/fmopl.c
    hw/audio/fmopl.h
    hw/block/tc58128.c
    hw/display/cirrus_vga.c
    hw/display/xenfb.c
    hw/dma/etraxfs_dma.c
    hw/intc/sh_intc.c
    hw/misc/mst_fpga.c
    hw/net/pcnet.c
    hw/sh4/sh7750.c
    hw/timer/m48t59.c
    hw/timer/sh_timer.c
    include/crypto/aes.h
    include/disas/bfd.h
    include/hw/sh4/sh.h
    libdecnumber/decNumber.c
    linux-headers/asm-generic/unistd.h
    linux-headers/linux/kvm.h
    linux-user/alpha/target_syscall.h
    linux-user/arm/nwfpe/double_cpdo.c
    linux-user/arm/nwfpe/fpa11_cpdt.c
    linux-user/arm/nwfpe/fpa11_cprt.c
    linux-user/arm/nwfpe/fpa11.h
    linux-user/flat.h
    linux-user/flatload.c
    linux-user/i386/target_syscall.h
    linux-user/ppc/target_syscall.h
    linux-user/sparc/target_syscall.h
    linux-user/syscall.c
    linux-user/syscall_defs.h
    linux-user/x86_64/target_syscall.h
    slirp/cksum.c
    slirp/if.c
    slirp/ip.h
    slirp/ip_icmp.c
    slirp/ip_icmp.h
    slirp/ip_input.c
    slirp/ip_output.c
    slirp/mbuf.c
    slirp/misc.c
    slirp/sbuf.c
    slirp/socket.c
    slirp/socket.h
    slirp/tcp_input.c
    slirp/tcpip.h
    slirp/tcp_output.c
    slirp/tcp_subr.c
    slirp/tcp_timer.c
    slirp/tftp.c
    slirp/udp.c
    slirp/udp.h
    target/cris/cpu.h
    target/cris/mmu.c
    target/cris/op_helper.c
    target/sh4/helper.c
    target/sh4/op_helper.c
    target/sh4/translate.c
    tcg/sparc/tcg-target.inc.c
    tests/tcg/cris/check_addo.c
    tests/tcg/cris/check_moveq.c
    tests/tcg/cris/check_swap.c
    tests/tcg/multiarch/test-mmap.c
    ui/vnc-enc-hextile-template.h
    ui/vnc-enc-zywrle.h
    util/envlist.c
    util/readline.c

The following have only TABs:

    bsd-user/i386/target_signal.h
    bsd-user/sparc64/target_signal.h
    bsd-user/sparc64/target_syscall.h
    bsd-user/sparc/target_signal.h
    bsd-user/sparc/target_syscall.h
    bsd-user/x86_64/target_signal.h
    crypto/desrfb.c
    hw/audio/intel-hda-defs.h
    hw/core/uboot_image.h
    hw/sh4/sh7750_regnames.c
    hw/sh4/sh7750_regs.h
    include/hw/cris/etraxfs_dma.h
    linux-user/alpha/termbits.h
    linux-user/arm/nwfpe/fpopcode.h
    linux-user/arm/nwfpe/fpsr.h
    linux-user/arm/syscall_nr.h
    linux-user/arm/target_signal.h
    linux-user/cris/target_signal.h
    linux-user/i386/target_signal.h
    linux-user/linux_loop.h
    linux-user/m68k/target_signal.h
    linux-user/microblaze/target_signal.h
    linux-user/mips64/target_signal.h
    linux-user/mips/target_signal.h
    linux-user/mips/target_syscall.h
    linux-user/mips/termbits.h
    linux-user/ppc/target_signal.h
    linux-user/sh4/target_signal.h
    linux-user/sh4/termbits.h
    linux-user/sparc64/target_syscall.h
    linux-user/sparc/target_signal.h
    linux-user/x86_64/target_signal.h
    linux-user/x86_64/termbits.h
    pc-bios/optionrom/optionrom.h
    slirp/mbuf.h
    slirp/misc.h
    slirp/sbuf.h
    slirp/tcp.h
    slirp/tcp_timer.h
    slirp/tcp_var.h
    target/i386/svm.h
    target/sparc/asi.h
    target/xtensa/core-dc232b/xtensa-modules.inc.c
    target/xtensa/core-dc233c/xtensa-modules.inc.c
    target/xtensa/core-de212/core-isa.h
    target/xtensa/core-de212/xtensa-modules.inc.c
    target/xtensa/core-fsf/xtensa-modules.inc.c
    target/xtensa/core-sample_controller/core-isa.h
    target/xtensa/core-sample_controller/xtensa-modules.inc.c
    target/xtensa/core-test_kc705_be/core-isa.h
    target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
    tests/tcg/cris/check_abs.c
    tests/tcg/cris/check_addc.c
    tests/tcg/cris/check_addcm.c
    tests/tcg/cris/check_addoq.c
    tests/tcg/cris/check_bound.c
    tests/tcg/cris/check_ftag.c
    tests/tcg/cris/check_int64.c
    tests/tcg/cris/check_lz.c
    tests/tcg/cris/check_openpf5.c
    tests/tcg/cris/check_sigalrm.c
    tests/tcg/cris/crisutils.h
    tests/tcg/cris/sys.c
    tests/tcg/i386/test-i386-ssse3.c
    ui/vgafont.h

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:56 +01:00
Paolo Bonzini
eae3eb3e18 qemu/queue.h: simplify reverse access to QTAILQ
The new definition of QTAILQ does not require passing the headname,
remove it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Paolo Bonzini
b58deb344d qemu/queue.h: leave head structs anonymous unless necessary
Most list head structs need not be given a name.  In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed.  In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct.  So clean up everything, not giving a
name except in the rare case where it is necessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Richard Henderson
4250da1092 tcg: Improve call argument loading
Free the argument register only after we have verified that the
temporary is not already in that register.  This case is likely
now that we are back propagating the preferred register.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:43 +11:00
Richard Henderson
25f49c5f15 tcg: Record register preferences during liveness
With these preferences, we can arrange for function call arguments to
be computed into the proper registers instead of requiring extra moves.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:35 +11:00
Richard Henderson
ae36a246ed tcg: Add TCG_OPF_BB_EXIT
Use this to notice the opcodes that exit the TB, which implies
that local temps are really dead and need not be synced.

Previously we so marked the true end of the TB, but that was
immediately overwritten by the la_bb_end invoked by any
TCG_OPF_BB_END opcode, like exit_tb.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:20 +11:00
Richard Henderson
f65a061c39 tcg: Split out more subroutines from liveness_pass_1
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:17 +11:00
Richard Henderson
2616c80821 tcg: Rename and adjust liveness_pass_1 helpers
No need for a "tcg_" prefix for a static function; we already
have another "la_" prefix for indicating liveness analysis.
Pass in nb_globals and nb_temps, as we will already have them
in registers for other loops within the parent function.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:09 +11:00
Richard Henderson
152c35aab4 tcg: Reindent parts of liveness_pass_1
There are two blocks of the form

    if (foo) {
        stuff1;
        goto bar;
    } else {
    baz:
        stuff2;
    }

which have unnecessary and confusing indentation.
Remove the else and unindent stuff2.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:57 +11:00
Richard Henderson
1894f69a61 tcg: Dump register preference info with liveness
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:48 +11:00
Richard Henderson
d62816f2db tcg: Improve register allocation for matching constraints
Try harder to honor the output_pref.  When we're forced to allocate
a second register for the input, it does not need to use the input
constraint; that will be honored by the register we allocate for the
output and a move is already required.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:40 +11:00
Richard Henderson
69e3706d2b tcg: Add output_pref to TCGOp
Allocate storage for, but do not yet fill in, per-opcode
preferences for the output operands.  Pass it in to the
register allocation routines for output operands.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:37 +11:00
Richard Henderson
ba87719cd2 tcg: Add preferred_reg argument to tcg_reg_alloc_do_movi
Pass this through to temp_sync.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:34 +11:00
Richard Henderson
98b4e186c1 tcg: Add preferred_reg argument to temp_sync
Pass this through to tcg_reg_alloc.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:32 +11:00
Richard Henderson
b722452aef tcg: Add preferred_reg argument to temp_load
Pass this through to tcg_reg_alloc.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:29 +11:00
Richard Henderson
b016486e7b tcg: Add preferred_reg argument to tcg_reg_alloc
This new argument will aid register allocation by indicating how
the temporary will be used in future.  If the preference cannot
be satisfied, fall back to the constraints of the current insn.

Short circuit the preference when it cannot be satisfied or if
it does not further constrain the operation.

With an eye toward optimizing function call sequences, optimize
for the preferred_reg set containing a single register.

For the moment, all users pass 0 for preference.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:06 +11:00
Richard Henderson
b4fc67c7af tcg: Add reachable_code_pass
Delete trivially dead code that follows unconditional branches and
noreturn helpers.  These can occur either via optimization or via
the structure of a target's translator following an exception.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:30 +11:00
Richard Henderson
d88a117eaa tcg: Reference count labels
Increment when adding branches, and decrement when removing them.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:27 +11:00
Richard Henderson
15d7409260 tcg: Add TCG_CALL_NO_RETURN
Remember which helpers have been marked noreturn.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:24 +11:00
Richard Henderson
3b50352b05 tcg: Renumber TCG_CALL_* flags
Previously, the low 4 bits were used for TCG_CALL_TYPE_MASK,
which was removed in 6a18ae2d29.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:15 +11:00
Alistair Francis
7a5549f2ae tcg/riscv: Add the target init code
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <dd6e439ab81883974b8fd91f904f6de26ab5d697.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
92c041c59b tcg/riscv: Add the prologue generation and register the JIT
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d023127967a0217d8d1eabdf5de6c0e8f8c228.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
bdf503819e tcg/riscv: Add the out op decoder
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <7c47f00cb4a9a777120456e0704b4076a5d943ab.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
03a7d0213d tcg/riscv: Add direct load and store instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <2e047a95c39c007c66cda024c095e29b0ac4c43e.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
efbea94c76 tcg/riscv: Add slowpath load and store instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1a0a7e8f3347764f212c5efa5c07c9be17efdec6.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
15840069e1 tcg/riscv: Add branch and jump instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c356657e627168d89cb5b012b7e21e4efbbe83f3.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
28ca738e9d tcg/riscv: Add the add2 and sub2 instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <5665a57809e32b35775e8e98fdab898853af37b8.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
61535d4988 tcg/riscv: Add the out load and store instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d5d88ff29163788938368bbdbd18815d59cef6a0.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
27fd64144b tcg/riscv: Add the extract instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d2afba46efefa9388cf3205fcedbb9a5fa411f.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
6cd2eda39f tcg/riscv: Add the mov and movi instruction
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <bd6a45c73a67b77ddaa2fe590a6bb8ee422b9683.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
dfa8e74f94 tcg/riscv: Add the relocation functions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <6ac4f4b0d5ea93cb0ee9a3b8b47ee9f7b3711494.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
bedf14e335 tcg/riscv: Add the instruction emitters
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c740aca183675625bb9cf3ce7b9e8b9d431ca694.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
54a9ce0f68 tcg/riscv: Add the immediate encoders
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d54dc56303fd1b0d7ed53869de2dbb59b111c7ca.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
8ce23a1312 tcg/riscv: Add support for the constraints
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <dba7315e4e20e879933f72d47ccf98f1cc612b8a.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
505e75c592 tcg/riscv: Add the tcg target registers
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <6e43abaa64361d57b9bc9439820d0e7701f2d47e.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis
fb1f70f368 tcg/riscv: Add the tcg-target.h file
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <a135ee1a88cd7bd08993a519d4d654da27785254.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Emilio G. Cota
ac1043f6d6 tcg: Drop nargs from tcg_op_insert_{before,after}
It's unused since 75e8b9b7aa.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181209193749.12277-9-cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Alistair Francis
161dec9d1b tcg/mips: Improve the add2/sub2 command to use TCG_TARGET_REG_BITS
Instead of hard coding 31 for the shift right use TCG_TARGET_REG_BITS - 1.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7dfbddf7014a595150aa79011ddb342c3cc17ec3.1544648105.git.alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
e1dcf3529d tcg: Add TCG_TARGET_HAS_MEMORY_BSWAP
For now, defined universally as true, since we previously required
backends to implement swapped memory operations.  Future patches
may now remove that support where it is onerous.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
6498594c8e tcg/optimize: Optimize bswap
Somehow we forgot these operations, once upon a time.
This will allow immediate stores to have their bswap
optimized away.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
9e821eab0a tcg: Clean up generic bswap64
Based on the only current user, Sparc:

New code uses 2 constants that take 2 insns to load from constant pool,
plus 13.  Old code used 6 constants that took 1 or 2 insns to create,
plus 21.  The result is a new total of 17 vs an old total of 29.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
a686dc71d8 tcg: Clean up generic bswap32
Based on the only current user, Sparc:

New code uses 1 constant that takes 2 insns to create, plus 8.
Old code used 2 constants that took 2 insns to create, plus 9.
The result is a new total of 10 vs an old total of 13.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
5785c17f31 tcg/i386: Add setup_guest_base_seg for FreeBSD
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
913c2bddc2 tcg/i386: Precompute all guest_base parameters
These values are constant between all qemu_ld/st invocations;
there is no need to figure this out each time.  If we cannot
use a segment or an offset directly for guest_base, load the
value into a register in the prologue.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
4810d96f03 tcg/i386: Assume 32-bit values are zero-extended
We now have an invariant that all TCG_TYPE_I32 values are
zero-extended, which means that we do not need to extend
them again during qemu_ld/st, either explicitly via a separate
tcg_out_ext32u or implicitly via P_ADDR32.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
75478279a0 tcg/i386: Implement INDEX_op_extr{lh}_i64_i32 for 32-bit guests
This preserves the invariant that all TCG_TYPE_I32 values are
zero-extended in the 64-bit host register.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
3dbc8c61de tcg/i386: Propagate is64 to tcg_out_qemu_ld_slow_path
This helps preserve the invariant that all TCG_TYPE_I32 values
are stored zero-extended in the 64-bit host registers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson
1d21d95b61 tcg/i386: Propagate is64 to tcg_out_qemu_ld_direct
This helps preserve the invariant that all TCG_TYPE_I32 values
are stored zero-extended in the 64-bit host registers.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
55dfd8fedc tcg/s390x: Return false on failure from patch_reloc
This does require an extra two checks within the slow paths
to replace the assert that we're moving.  Also add two checks
within existing functions that lacked any kind of assert for
out of range branch.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
d513290351 tcg/ppc: Return false on failure from patch_reloc
The reloc_pc{14,24}_val routines retain their asserts.
Use these directly within the slow paths.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
43fabd30e2 tcg/arm: Return false on failure from patch_reloc
This does require an extra two checks within the slow paths
to replace the assert that we're moving.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
214bfe83d5 tcg/aarch64: Return false on failure from patch_reloc
This does require an extra two checks within the slow paths
to replace the assert that we're moving.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
bec3afd5fc tcg/i386: Return false on failure from patch_reloc
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
6ac1778676 tcg: Return success from patch_reloc
This will move the assert for success from within (subroutines of)
patch_reloc into the callers.  It will also let new code do something
different when a relocation is out of range.

For the moment, all backends are trivially converted to return true.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
8c1b079279 tcg/mips: Remove retranslation code
There is no longer a need for preserving branch offset operands,
as we no longer re-translate.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
791645f022 tcg/sparc: Remove retranslation code
There is no longer a need for preserving branch offset operands,
as we no longer re-translate.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
3661612fc3 tcg/s390: Remove retranslation code
There is no longer a need for preserving branch offset operands,
as we no longer re-translate.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
f9c7246faa tcg/ppc: Fold away "noaddr" branch routines
There is no longer a need for preserving branch offset operands,
as we no longer re-translate.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
37ee93a974 tcg/arm: Fold away "noaddr" branch routines
There are one use apiece for these.  There is no longer a need for
preserving branch offset operands, as we no longer re-translate.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
2672ccc7ee tcg/arm: Remove reloc_pc24_atomic
It is unused since 3fb53fb4d1.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
733589b338 tcg/aarch64: Fold away "noaddr" branch routines
There are one use apiece for these.  There is no longer a need for
preserving branch offset operands, as we no longer re-translate.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
90d6cb7811 tcg/aarch64: Remove reloc_pc26_atomic
It is unused since b68686bd4b.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
66c0285df4 tcg/i386: Move TCG_REG_CALL_STACK from define to enum
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
5740d9f714 tcg/i386: Always use %ebp for TCG_AREG0
For x86_64, this can remove a REX prefix resulting in smaller code
when manipulating globals of type i32, as we move them between backing
store via cpu_env, aka TCG_AREG0.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson
f6823cbe37 target/sparc: Remove the constant pool
Partially reverts ab20bdc116.  The 14-bit displacement that we
allowed to reach the constant pool is not always sufficient.
Retain the tb-relative addressing, as that is how most return
values from the tb are computed.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:42 +03:00
Thomas Huth
6fa2cef205 tcg/tcg.h: Remove GCC check for tcg_debug_assert() macro
Both GCC v4.8 and Clang v3.4 (our minimum versions) support
__builtin_unreachable(), so we can remove the version check here now.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-12-12 10:01:12 +01:00
Peter Maydell
a7ce790a02 tcg/tcg-op.h: Add multiple include guard
The tcg-op.h header was missing the usual guard against multiple
inclusion; add it.

(Spotted by lgtm.com's static analyzer.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181108125256.30986-1-peter.maydell@linaro.org
2018-11-08 15:15:32 +00:00
Richard Henderson
e6cd4bb59b tcg: Split CONFIG_ATOMIC128
GCC7+ will no longer advertise support for 16-byte __atomic operations
if only cmpxchg is supported, as for x86_64.  Fortunately, x86_64 still
has support for __sync_compare_and_swap_16 and we can make use of that.
AArch64 does not have, nor ever has had such support, so open-code it.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 19:46:36 -07:00
Emilio G. Cota
72fd2efbbd tcg: distribute tcg_time into TCG contexts
When we implemented per-vCPU TCG contexts, we forgot to also
distribute the tcg_time counter, which has remained as a global
accessed without any serialization, leading to potentially missed
counts.

Fix it by distributing the field over the TCG contexts, embedding
it into TCGProfile with a field called "cpu_exec_time", which is more
descriptive than "tcg_time". Add a function to query this value
directly, and for completeness, fill in the field in
tcg_profile_snapshot, even though its callers do not use it.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181010144853.13005-5-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 18:58:10 -07:00
Emilio G. Cota
dd1d7da23b tcg: plug holes in struct TCGProfile
This plugs two 4-byte holes in 64-bit.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181010144853.13005-4-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 18:58:10 -07:00
Emilio G. Cota
c1f543b739 tcg: fix use of uninitialized variable under CONFIG_PROFILER
We forgot to initialize n in commit 15fa08f845 ("tcg: Dynamically
allocate TCGOps", 2017-12-29).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181010144853.13005-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 18:58:10 -07:00
Richard Henderson
d7f425fdea tcg: Implement CPU_LOG_TB_NOCHAIN during expansion
Rather than test NOCHAIN before linking, do not emit the
goto_tb opcode at all.  We already do this for goto_ptr.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 18:58:10 -07:00
Roman Kapl
93bf9a4273 tcg/i386: fix vector operations on 32-bit hosts
The TCG backend uses LOWREGMASK to get the low 3 bits of register numbers.
This was defined as no-op for 32-bit x86, with the assumption that we have
eight registers anyway. This assumption is not true once we have xmm regs.

Since LOWREGMASK was a no-op, xmm register indidices were wrong in opcodes
and have overflown into other opcode fields, wreaking havoc.

To trigger these problems, you can try running the "movi d8, #0x0" AArch64
instruction on 32-bit x86. "vpxor %xmm0, %xmm0, %xmm0" should be generated,
but instead TCG generated "vpxor %xmm0, %xmm0, %xmm2".

Fixes: 770c2fc7bb ("Add vector operations")
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20180824131734.18557-1-rka@sysgo.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-09-26 09:02:51 -07:00
Richard Henderson
1fb57da72a tcg/optimize: Do not skip default processing of dup_vec
If we do not opimize away dup_vec, we must mark its output as changed.

Fixes: 170ba88f45
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180805233258.31892-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-06 14:57:48 +01:00
Richard Henderson
672189cd58 tcg/i386: Mark xmm registers call-clobbered
When host vector registers and operations were introduced, I failed
to mark the registers call clobbered as required by the ABI.

Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-23 09:21:14 -07:00
Alex Bennée
e65a5f227d tcg/aarch64: limit mul_vec size
In AdvSIMD we can only do 32x32 integer multiples although SVE is
capable of larger 64 bit multiples. As a result we can end up
generating invalid opcodes. Fix this by only reprting we can emit
mul vector ops if the size is small enough.

Fixes a crash on:

  sve-all-short-v8.3+sve@vq3/insn_mul_z_zi___INC.risu.bin

When running on AArch64 hardware.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180719154248.29669-1-alex.bennee@linaro.org>
[rth: Removed the tcg_debug_assert -- there are plenty of other
cases that we do not diagnose within the insn encoding helpers.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-19 09:07:31 -07:00
Richard Henderson
499748d768 tcg: Restrict check_size_impl to multiples of the line size
Normally this is automatic in the size restrictions that are placed
on vector sizes coming from the implementation.  However, for the
legitimate size tuple [oprsz=8, maxsz=32], we need to clear the final
24 bytes of the vector register.  Without this check, do_dup selects
TCG_TYPE_V128 and clears only 16 bytes.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180705191929.30773-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-09 14:51:34 +01:00
Richard Henderson
9f75462065 tcg: Reduce max TB opcode count
Also, assert that we don't overflow any of two different offsets into
the TB. Both unwind and goto_tb both record a uint16_t for later use.

This fixes an arm-softmmu test case utilizing NEON in which there is
a TB generated that runs to 7800 opcodes, and compiles to 96k on an
x86_64 host.  This overflows the 16-bit offset in which we record the
goto_tb reset offset.  Because of that overflow, we install a jump
destination that goes to neverland.  Boom.

With this reduced op count, the same TB compiles to about 48k for
aarch64, ppc64le, and x86_64 hosts, and neither assertion fires.

Cc: qemu-stable@nongnu.org
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15 09:39:53 -10:00
Emilio G. Cota
0ac20318ce tcg: remove tb_lock
Use mmap_lock in user-mode to protect TCG state and the page descriptors.
In !user-mode, each vCPU has its own TCG state, so no locks needed.
Per-page locks are used to protect the page descriptors.

Per-TB locks are used in both modes to protect TB jumps.

Some notes:

- tb_lock is removed from notdirty_mem_write by passing a
  locked page_collection to tb_invalidate_phys_page_fast.

- tcg_tb_lookup/remove/insert/etc have their own internal lock(s),
  so there is no need to further serialize access to them.

- do_tb_flush is run in a safe async context, meaning no other
  vCPU threads are running. Therefore acquiring mmap_lock there
  is just to please tools such as thread sanitizer.

- Not visible in the diff, but tb_invalidate_phys_page already
  has an assert_memory_lock.

- cpu_io_recompile is !user-only, so no mmap_lock there.

- Added mmap_unlock()'s before all siglongjmp's that could
  be called in user-mode while mmap_lock is held.
  + Added an assert for !have_mmap_lock() after returning from
    the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic.

Performance numbers before/after:

Host: AMD Opteron(tm) Processor 6376

                 ubuntu 17.04 ppc64 bootup+shutdown time

  700 +-+--+----+------+------------+-----------+------------*--+-+
      |    +    +      +            +           +           *B    |
      |         before ***B***                            ** *    |
      |tb lock removal ###D###                         ***        |
  600 +-+                                           ***         +-+
      |                                           **         #    |
      |                                        *B*          #D    |
      |                                     *** *         ##      |
  500 +-+                                ***           ###      +-+
      |                             * ***           ###           |
      |                            *B*          # ##              |
      |                          ** *          #D#                |
  400 +-+                      **            ##                 +-+
      |                      **           ###                     |
      |                    **           ##                        |
      |                  **         # ##                          |
  300 +-+  *           B*          #D#                          +-+
      |    B         ***        ###                               |
      |    *       **       ####                                  |
      |     *   ***      ###                                      |
  200 +-+   B  *B     #D#                                       +-+
      |     #B* *   ## #                                          |
      |     #*    ##                                              |
      |    + D##D#     +            +           +            +    |
  100 +-+--+----+------+------------+-----------+------------+--+-+
           1    8      16      Guest CPUs       48           64
  png: https://imgur.com/HwmBHXe

              debian jessie aarch64 bootup+shutdown time

  90 +-+--+-----+-----+------------+------------+------------+--+-+
     |    +     +     +            +            +            +    |
     |         before ***B***                                B    |
  80 +tb lock removal ###D###                              **D  +-+
     |                                                   **###    |
     |                                                 **##       |
  70 +-+                                             ** #       +-+
     |                                             ** ##          |
     |                                           **  #            |
  60 +-+                                       *B  ##           +-+
     |                                       **  ##               |
     |                                    ***  #D                 |
  50 +-+                               ***   ##                 +-+
     |                             * **   ###                     |
     |                           **B*  ###                        |
  40 +-+                     ****  # ##                         +-+
     |                   ****     #D#                             |
     |             ***B**      ###                                |
  30 +-+    B***B**        ####                                 +-+
     |    B *   *     # ###                                       |
     |     B       ###D#                                          |
  20 +-+   D  ##D##                                             +-+
     |      D#                                                    |
     |    +     +     +            +            +            +    |
  10 +-+--+-----+-----+------------+------------+------------+--+-+
          1     8     16      Guest CPUs        48           64
  png: https://imgur.com/iGpGFtv

The gains are high for 4-8 CPUs. Beyond that point, however, unrelated
lock contention significantly hurts scalability.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15 08:18:48 -10:00
Emilio G. Cota
128ed2278c tcg: move tb_ctx.tb_phys_invalidate_count to tcg_ctx
Thereby making it per-TCGContext. Once we remove tb_lock, this will
avoid an atomic increment every time a TB is invalidated.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15 07:42:55 -10:00
Emilio G. Cota
be2cdc5e35 tcg: track TBs with per-region BST's
This paves the way for enabling scalable parallel generation of TCG code.

Instead of tracking TBs with a single binary search tree (BST), use a
BST for each TCG region, protecting it with a lock. This is as scalable
as it gets, since each TCG thread operates on a separate region.

The core of this change is the introduction of struct tcg_region_tree,
which contains a pointer to a GTree and an associated lock to serialize
accesses to it. We then allocate an array of tcg_region_tree's, adding
the appropriate padding to avoid false sharing based on
qemu_dcache_linesize.

Given a tc_ptr, we first find the corresponding region_tree. This
is done by special-casing the first and last regions first, since they
might be of size != region.size; otherwise we just divide the offset
by region.stride. I was worried about this division (several dozen
cycles of latency), but profiling shows that this is not a fast path.
Note that region.stride is not required to be a power of two; it
is only required to be a multiple of the host's page size.

Note that with this design we can also provide consistent snapshots
about all region trees at once; for instance, tcg_tb_foreach
acquires/releases all region_tree locks before/after iterating over them.
For this reason we now drop tb_lock in dump_exec_info().

As an alternative I considered implementing a concurrent BST, but this
can be tricky to get right, offers no consistent snapshots of the BST,
and performance and scalability-wise I don't think it could ever beat
having separate GTrees, given that our workload is insert-mostly (all
concurrent BST designs I've seen focus, understandably, on making
lookups fast, which comes at the expense of convoluted, non-wait-free
insertions/removals).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15 07:42:55 -10:00
John Arbuckle
1019242af1 tcg/i386: Use byte form of xgetbv instruction
The assembler in most versions of Mac OS X is pretty old and does not
support the xgetbv instruction.  To go around this problem, the raw
encoding of the instruction is used instead.

Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-Id: <20180604215102.11002-1-programmingkidx@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15 07:42:55 -10:00
Peter Maydell
163670542f tcg-next queue
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbEdLqAAoJEGTfOOivfiFfQaEH/Rq96S5bo94495KmRJY9e/jw
 lV321YYI7nx7sHtViG/B3iTkvnxzZPWcc7XbBMxyV5xmMQ/5zjS/ynZPFyy/cYRn
 zLM4W0SJ38EqhHTZpkkvw9Nle8UbNWKm5PgND2TyE4hmeuQ98OrQ6Y1GvP4MFpXs
 uQErbmMjYHMq7thbfCO6ulJjjEliRy3AJ2C3fCCCUgBQrJt6JeqbGr/Zzi2y88M9
 IhoK8RbJiWT2O5Tl95q2NOQvr11WbFlu/K0nuaVgbfTwd2tp3ygmRKPpeZ24qA52
 qtwgcIjWHHkkC5s1qaP8oW4FtoMQZdsaOwSOPw0ZBnG+VA7P/h33fWr9f5SistA=
 =UVdE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into staging

tcg-next queue

# gpg: Signature made Sat 02 Jun 2018 00:12:42 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/tcg-next-pull-request:
  tcg: Pass tb and index to tcg_gen_exit_tb separately

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 11:28:31 +01:00
Richard Henderson
07ea28b418 tcg: Pass tb and index to tcg_gen_exit_tb separately
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument.  We can also do some more
sanity checking of the index argument.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01 15:15:27 -07:00
Philippe Mathieu-Daudé
23c11b04dc target: Do not include "exec/exec-all.h" if it is not necessary
Code change produced with:
    $ git grep '#include "exec/exec-all.h"' | \
      cut -d: -f-1 | \
      xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \
      xargs sed -i.bak '/#include "exec\/exec-all.h"/d'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-10-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 14:15:10 +02:00
Emilio G. Cota
1d34982155 tcg: fix s/compliment/complement/ typos
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-20 08:25:23 +03:00
Peter Maydell
f5583c527f target-arm queue:
* hw/arm/iotkit.c: fix minor memory leak
  * softfloat: fix wrong-exception-flags bug for multiply-add corner case
  * arm: isolate and clean up DTB generation
  * implement Arm v8.1-Atomics extension
  * Fix some bugs and missing instructions in the v8.2-FP16 extension
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJa9IUCAAoJEDwlJe0UNgzeEGMQAKKjVRzZ7MBgvxQj0FJSWhSP
 BZkATf3ktid255PRpIssBZiY9oM+uY6n+/IRozAGvfDBp9eQOkrZczZjfW5hpe0B
 YsQadtk5cUOXqQzRTegSMPOoMmz8f5GaGOk4R6AEXJEX+Rug/zbOn9Q8Yx7JTd7o
 yBvU1+fys3galSiB88cffA95B9fwGfLsM7rP6OC4yNdUBYwjHf3wtY53WsxtWqX9
 oX4keEiROQkrOfbSy9wYPZzu/0iRo8v35+7wIZhvNSlf02k6yJ7a+w0C4EQIRhWm
 5zciE+aMYr7nOGpj7AEJLrRekhwnD6Ppje6aUd15yrxfNRZkpk/FeECWnaOPDis7
 QNijx5Zqg6+GyItQKi5U4vFVReMj09OB7xDyAq77xDeBj4l3lg2DNkRfRhqQZAcv
 2r4EW+pfLNj76Ah1qtQ410fprw462Sopb6bHmeuFbf1QFbQvJ4CL1+7Jl3ExrDX4
 2+iQb4sQghWDxhDLfRSLxQ7K+bX+mNfGdFW8h+jPShD/+JY42dTKkFZEl4ghNgMD
 mpj8FrQuIkSMqnDmPfoTG5MVTMERacqPU7GGM7/fxudIkByO3zTiLxJ/E+Iy8HvX
 29xKoOBjKT5FJrwJABsN6VpA3EuyAARgQIZ/dd6N5GZdgn2KAIHuaI+RHFOesKFd
 dJGM6sdksnsAAz28aUEJ
 =uXY+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180510' into staging

target-arm queue:
 * hw/arm/iotkit.c: fix minor memory leak
 * softfloat: fix wrong-exception-flags bug for multiply-add corner case
 * arm: isolate and clean up DTB generation
 * implement Arm v8.1-Atomics extension
 * Fix some bugs and missing instructions in the v8.2-FP16 extension

# gpg: Signature made Thu 10 May 2018 18:44:34 BST
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits)
  target/arm: Clear SVE high bits for FMOV
  target/arm: Fix float16 to/from int16
  target/arm: Implement vector shifted FCVT for fp16
  target/arm: Implement vector shifted SCVF/UCVF for fp16
  target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only
  target/arm: Implement CAS and CASP
  target/arm: Fill in disas_ldst_atomic
  target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode
  target/riscv: Use new atomic min/max expanders
  tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add
  tcg: Introduce atomic helpers for integer min/max
  target/xtensa: Use new min/max expanders
  target/arm: Use new min/max expanders
  tcg: Introduce helpers for integer min/max
  atomic.h: Work around gcc spurious "unused value" warning
  make sure that we aren't overwriting mc->get_hotplug_handler by accident
  arm/boot: split load_dtb() from arm_load_kernel()
  platform-bus-device: use device plug callback instead of machine_done notifier
  pc: simplify MachineClass::get_hotplug_handler handling
  softfloat: Handle default NaN mode after pickNaNMulAdd, not before
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	target/riscv/translate.c
2018-05-11 17:41:54 +01:00
Richard Henderson
5507c2bf35 tcg: Introduce atomic helpers for integer min/max
Given that this atomic operation will be used by both risc-v
and aarch64, let's not duplicate code across the two targets.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-10 18:10:57 +01:00
Richard Henderson
b87fb8cd9f tcg: Introduce helpers for integer min/max
These operations are re-invented by several targets so far.
Several supported hosts have insns for these, so place the
expanders out-of-line for a future introduction of tcg opcodes.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-10 18:10:57 +01:00
Richard Henderson
abebf92597 tcg: Limit the number of ops in a TB
In 6001f7729e we partially attempt to address the branch
displacement overflow caused by 15fa08f845.

However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c
is a testcase that contains a TB so large as to overflow anyway.
The limit here of 8000 ops produces a maximum output TB size of
24112 bytes on a ppc64le host with that test case.  This is still
much less than the maximum forward branch distance of 32764 bytes.

Cc: qemu-stable@nongnu.org
Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 08:30:57 -07:00
Peter Maydell
7eb30ef0ba tcg/i386: Fix dup_vec in non-AVX2 codepath
The VPUNPCKLD* instructions are all "non-destructive source",
indicated by "NDS" in the encoding string in the x86 ISA manual.
This means that they take two source operands, one of which is
encoded in the VEX.vvvv field. We were incorrectly treating them
as if they were destructive-source and passing 0 as the 'v'
argument of tcg_out_vex_modrm(). This meant we were always
using %xmm0 as one of the source operands, causing incorrect
results if the register allocator happened to want to use
something else. For instance the input AArch64 insn:
 DUP v26.16b, w21
which becomes TCG IR ops:
 dup_vec v128,e8,tmp2,x21
 st_vec v128,e8,tmp2,env,$0xa40
was assembled to:
0x607c568c:  c4 c1 7a 7e 86 e8 00 00  vmovq    0xe8(%r14), %xmm0
0x607c5694:  00
0x607c5695:  c5 f9 60 c8              vpunpcklbw %xmm0, %xmm0, %xmm1
0x607c5699:  c5 f9 61 c9              vpunpcklwd %xmm1, %xmm0, %xmm1
0x607c569d:  c5 f9 70 c9 00           vpshufd  $0, %xmm1, %xmm1
0x607c56a2:  c4 c1 7a 7f 8e 40 0a 00  vmovdqu  %xmm1, 0xa40(%r14)
0x607c56aa:  00

when the vpunpcklwd insn should be "%xmm1, %xmm1, %xmm1".
This resulted in our incorrectly setting the output vector to
q26=0000320000003200:0000320000003200
when given an input of x21 == 0000000002803200
rather than the expected all-zeroes.

Pass the correct source register number to tcg_out_vex_modrm()
for these insns.

Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180504153431.5169-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 08:30:57 -07:00
Laurent Vivier
6001f7729e tcg: workaround branch instruction overflow in tcg_out_qemu_ld/st
ppc64 uses a BC instruction to call the tcg_out_qemu_ld/st
slow path. BC instruction uses a relative address encoded
on 14 bits.

The slow path functions are added at the end of the generated
instructions buffer, in the reverse order of the callers.
So more we have slow path functions more the distance between
the caller (BC) and the function increases.

This patch changes the behavior to generate the functions in
the same order of the callers.

Cc: qemu-stable@nongnu.org
Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20180429235840.16659-1-lvivier@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01 11:56:55 -07:00
Richard Henderson
5bfa803448 tcg: Improve TCGv_ptr support
Drop TCGV_PTR_TO_NAT and TCGV_NAT_TO_PTR internal macros.

Add tcg_temp_local_new_ptr, tcg_gen_brcondi_ptr, tcg_gen_ext_i32_ptr,
tcg_gen_trunc_i64_ptr, tcg_gen_extu_ptr_i64, tcg_gen_trunc_ptr_i32.

Use inlines instead of macros where possible.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01 11:56:16 -07:00
Richard Henderson
9a938d86b0 tcg: Allow wider vectors for cmp and mul
In db432672, we allow wide inputs for operations such as add.
However, in 212be173 and 3774030a we didn't do the same for
compare and multiply.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01 11:56:16 -07:00
Henry Wertz
3f814b8037 tcg/arm: Fix memory barrier encoding
I found with qemu 2.11.x or newer that I would get an illegal instruction
error running some Intel binaries on my ARM chromebook.  On investigation,
I found it was quitting on memory barriers.

qemu instruction:
mb $0x31
was translating as:
0x604050cc:  5bf07ff5  blpl     #0x600250a8

After patch it gives:
0x604050cc:  f57ff05b  dmb      ish

In short, I found INSN_DMB_ISH (memory barrier for ARMv7) appeared to be
correct based on online docs, but due to some endian-related shenanigans it
had to be byte-swapped to suit qemu; it appears INSN_DMB_MCR (memory
barrier for ARMv6) also should be byte swapped  (and this patch does so).
I have not checked for correctness of aarch64's barrier instruction.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Henry Wertz <hwertz10@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01 11:56:07 -07:00
Richard Henderson
d103021269 tcg: Document INDEX_mul[us]h_*
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01 11:41:56 -07:00
Peter Maydell
161dfd1e7f tcg/mips: Handle large offsets from target env to tlb_table
The MIPS TCG target makes the assumption that the offset from the
target env pointer to the tlb_table is less than about 64K. This
used to be true, but gradual addition of features to the Arm
target means that it's no longer true there. This results in
the build-time assertion failing:

In file included from /home/pm215/qemu/include/qemu/osdep.h:36:0,
                 from /home/pm215/qemu/tcg/tcg.c:28:
/home/pm215/qemu/tcg/mips/tcg-target.inc.c: In function ‘tcg_out_tlb_load’:
/home/pm215/qemu/include/qemu/compiler.h:90:36: error: static assertion failed: "not expecting: offsetof(CPUArchState, tlb_table[NB_MMU_MODES - 1][1]) > 0x7ff0 + 0x7fff"
 #define QEMU_BUILD_BUG_MSG(x, msg) _Static_assert(!(x), msg)
                                    ^
/home/pm215/qemu/include/qemu/compiler.h:98:30: note: in expansion of macro ‘QEMU_BUILD_BUG_MSG’
 #define QEMU_BUILD_BUG_ON(x) QEMU_BUILD_BUG_MSG(x, "not expecting: " #x)
                              ^
/home/pm215/qemu/tcg/mips/tcg-target.inc.c:1236:9: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
         QEMU_BUILD_BUG_ON(offsetof(CPUArchState,
         ^
/home/pm215/qemu/rules.mak:66: recipe for target 'tcg/tcg.o' failed

An ideal long term approach would be to rearrange the CPU state
so that the tlb_table was not so far along it, but this is tricky
because it would move it from the "not cleared on CPU reset" part
of the struct to the "cleared on CPU reset" part. As a simple fix
for the 2.12 release, make the MIPS TCG target handle an arbitrary
offset by emitting more add instructions. This will mean an extra
instruction in the fastpath for TCG loads and stores for the
affected guests (currently just aarch64-softmmu).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20180413142336.32163-1-peter.maydell@linaro.org
2018-04-16 11:51:37 +01:00
Richard Henderson
9743cd5736 tcg: Introduce tcg_set_insn_start_param
The parameters for tcg_gen_insn_start are target_ulong, which may be split
into two TCGArg parameters for storage in the opcode on 32-bit hosts.

Fixes the ARM target and its direct use of tcg_set_insn_param, which would
set the wrong argument in the 64-on-32 case.

Cc: qemu-stable@nongnu.org
Reported-by: alarson@ddci.com
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180410003558.2470-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-10 13:02:26 +01:00
Richard Henderson
f2f1dde751 tcg: Mark muluh_i64 and mulsh_i64 as 64-bit ops
Failure to do so results in the tcg optimizer sign-extending
any constant fold from 32-bits.  This turns out to be visible
in the RISC-V testsuite using a host that emits these opcodes
(e.g. any non-x86_64).

Reported-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-28 12:45:16 +08:00
Richard Henderson
adb196cbd5 tcg: Add choose_vector_size
This unifies 5 copies of checks for supported vector size,
and in the process fixes a missing check in tcg_gen_gvec_2s.

This lead to an assertion failure for 64-bit vector multiply,
which is not available in the AVX instruction set.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16 00:55:04 +08:00
Richard Henderson
7f34ed4bcd tcg/i386: Support INDEX_op_dup2_vec for -m32
Unknown why -m32 was passing with gcc but not clang; it should have
failed for both.  This would be used for tcg_gen_dup_i64_vec, and
visible with the right TB and an aarch64 guest.

Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16 00:55:04 +08:00
Richard Henderson
b2e3ae9452 tcg: Improve tcg_gen_muli_i32/i64
Convert multiplication by power of two to left shift.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16 00:55:04 +08:00
Richard Henderson
14e4c1e235 tcg/aarch64: Add vector operations
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:08 +00:00
Richard Henderson
770c2fc7bb tcg/i386: Add vector operations
The x86 vector instruction set is extremely irregular.  With newer
editions, Intel has filled in some of the blanks.  However, we don't
get many 64-bit operations until SSE4.2, introduced in 2009.

The subsequent edition was for AVX1, introduced in 2011, which added
three-operand addressing, and adjusts how all instructions should be
encoded.

Given the relatively narrow 2 year window between possible to support
and desirable to support, and to vastly simplify code maintainence,
I am only planning to support AVX1 and later cpus.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:08 +00:00
Richard Henderson
170ba88f45 tcg/optimize: Handle vector opcodes during optimize
Trivial move and constant propagation.  Some identity and constant
function folding, but nothing that requires knowledge of the size
of the vector element.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:06 +00:00
Richard Henderson
22fc352703 tcg: Add generic vector helpers with a scalar operand
Use dup to convert a non-constant scalar to a third vector.

Add addition, multiplication, and logical operations with an immediate.
Add addition, subtraction, multiplication, and logical operations with
a non-constant scalar.  Allow for the front-end to build operations in
which the scalar operand comes first.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:06 +00:00
Richard Henderson
f49b12c6e6 tcg: Add generic helpers for saturating arithmetic
No vector ops as yet.  SSE only has direct support for 8- and 16-bit
saturation; handling 32- and 64-bit saturation is much more expensive.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:06 +00:00
Richard Henderson
3774030a3e tcg: Add generic vector ops for multiplication
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:06 +00:00
Richard Henderson
212be173f0 tcg: Add generic vector ops for comparisons
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:05 +00:00
Richard Henderson
d0ec97967f tcg: Add generic vector ops for constant shifts
Opcodes are added for scalar and vector shifts, but considering the
varied semantics of these do not expose them to the front ends.  Do
go ahead and provide them in case they are needed for backend expansion.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:05 +00:00
Richard Henderson
db432672dc tcg: Add generic vector expanders
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:05 +00:00
Richard Henderson
474b2e8f0f tcg: Standardize integral arguments to expanders
Some functions use intN_t arguments, some use uintN_t, some just
used "unsigned".  To aid putting function pointers in tables, we
need consistency.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:05 +00:00
Richard Henderson
d2fd745fe8 tcg: Add types and basic operations for host vectors
Nothing uses or enables them yet.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:54:04 +00:00
Richard Henderson
da73a4abca tcg: Allow multiple word entries into the constant pool
This will be required for storing vector constants.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08 15:53:34 +00:00
Richard Henderson
030ffe39dd tcg/ppc: Allow a 32-bit offset to the constant pool
We recently relaxed the limit of the number of opcodes that can
appear in a TranslationBlock.  In certain cases this has resulted
in relocation overflow.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16 08:21:56 -08:00
Richard Henderson
4a64e0fd68 tcg/ppc: Support tlb offsets larger than 64k
AArch64 with SVE has an offset of 80k to the 8th TLB.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16 08:21:56 -08:00
Richard Henderson
71f9cee9d0 tcg/arm: Support tlb offsets larger than 64k
AArch64 with SVE has an offset of 80k to the 8th TLB.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16 08:21:56 -08:00
Richard Henderson
7170ac3313 tcg/arm: Fix double-word comparisons
The code sequence we were generating was only good for unsigned
comparisons.  For signed comparisions, use the sequence from gcc.

Fixes booting of ppc64 firmware, with a patch changing the code
sequence for ppc comparisons.

Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16 08:20:39 -08:00
Richard Henderson
1df3caa946 tcg: Allow 6 arguments to TCG helpers
We already handle this in the backends, and the lifetime datum
for the TCGOp is already large enough.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29 12:43:40 -08:00
Richard Henderson
923ed17501 tcg: Add tcg_signed_cond
Complimenting the existing tcg_unsigned_cond.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29 12:43:40 -08:00
Richard Henderson
cd9090aa9d tcg: Generalize TCGOp parameters
We had two fields specific to INDEX_op_call.  Rename these and
add some macros so that the fields may be reused for other opcodes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29 12:43:39 -08:00
Richard Henderson
15fa08f845 tcg: Dynamically allocate TCGOps
With no fixed array allocation, we can't overflow a buffer.
This will be important as optimizations related to host vectors
may expand the number of ops used.

Use QTAILQ to link the ops together.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29 12:43:39 -08:00
Richard Henderson
f764718d0c tcg: Remove TCGV_UNUSED* and TCGV_IS_UNUSED*
These are now trivial sets and tests against NULL.  Unwrap.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29 12:43:39 -08:00
Richard Henderson
ba2c747992 tcg/s390x: Use constant pool for prologue
Rather than have separate code only used for guest_base,
rely on a recent change to handle constant pool entries.

Cc: qemu-s390x@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-03 09:33:45 +01:00
Richard Henderson
5b38ee3161 tcg: Allow constant pool entries in the prologue
Both ARMv6 and AArch64 currently may drop complex guest_base values
into the constant pool.  But generic code wasn't expecting that, and
the pool is not emitted.  Correct that.

Tested-by: Emilio G. Cota <cota@braap.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-03 09:33:45 +01:00
Richard Henderson
1c2adb958f tcg: Initialize cpu_env generically
This is identical for each target.  So, move the initialization to
common code.  Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.

This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
3468b59e18 tcg: enable multiple TCG contexts in softmmu
This enables parallel TCG code generation. However, we do not take
advantage of it yet since tb_lock is still held during tb_gen_code.

In user-mode we use a single TCG context; see the documentation
added to tcg_region_init for the rationale.

Note that targets do not need any conversion: targets initialize a
TCGContext (e.g. defining TCG globals), and after this initialization
has finished, the context is cloned by the vCPU threads, each of
them keeping a separate copy.

TCG threads claim one entry in tcg_ctxs[] by atomically increasing
n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's
of that variable and tcg_ctxs; they are there just to play nice with
analysis tools such as thread sanitizer.

Note that we do not allocate an array of contexts (we allocate
an array of pointers instead) because when tcg_context_init
is called, we do not know yet how many contexts we'll use since
the bool behind qemu_tcg_mttcg_enabled() isn't set yet.

Previous patches folded some TCG globals into TCGContext. The non-const
globals remaining are only set at init time, i.e. before the TCG
threads are spawned. Here is a list of these set-at-init-time globals
under tcg/:

Only written by tcg_context_init:
- indirect_reg_alloc_order
- tcg_op_defs
Only written by tcg_target_init (called from tcg_context_init):
- tcg_target_available_regs
- tcg_target_call_clobber_regs
- arm: arm_arch, use_idiv_instructions
- i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt,
        have_movbe, have_popcnt
- mips: use_movnz_instructions, use_mips32_instructions,
        use_mips32r2_instructions, got_sigill (tcg_target_detect_isa)
- ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr
- s390: tb_ret_addr, s390_facilities
- sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines),
         use_vis3_instructions

Only written by tcg_prologue_init:
- 'struct jit_code_entry one_entry'
- aarch64: tb_ret_addr
- arm: tb_ret_addr
- i386: tb_ret_addr, guest_base_flags
- ia64: tb_ret_addr
- mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
e8feb96fcc tcg: introduce regions to split code_gen_buffer
This is groundwork for supporting multiple TCG contexts.

The naive solution here is to split code_gen_buffer statically
among the TCG threads; this however results in poor utilization
if translation needs are different across TCG threads.

What we do here is to add an extra layer of indirection, assigning
regions that act just like pages do in virtual memory allocation.
(BTW if you are wondering about the chosen naming, I did not want
to use blocks or pages because those are already heavily used in QEMU).

We use a global lock to serialize allocations as well as statistics
reporting (we now export the size of the used code_gen_buffer with
tcg_code_size()). Note that for the allocator we could just use
a counter and atomic_inc; however, that would complicate the gathering
of tcg_code_size()-like stats. So given that the region operations are
not a fast path, a lock seems the most reasonable choice.

The effectiveness of this approach is clear after seeing some numbers.
I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark.
Note that I'm evaluating this after enabling per-thread TCG (which
is done by a subsequent commit).

* -smp 1, 1 region (entire buffer):
    qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357
    qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363
    qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364
    qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373
    qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373
    qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360
    qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370
    qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367

That is, 8 flushes.

* -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]:

    qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356
    qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361
    qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361
    qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375
    qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375
    qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360
    qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365
    qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368

Again, 8 flushes. Note how buffer utilization is not 100%, but it
is close. Smaller region sizes would yield higher utilization,
but we want region allocation to be rare (it acquires a lock), so
we do not want to go too small.

* -smp 8, static partitioning of 8 regions (10 MB per region):
    qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354
    qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370
    qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365
    qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377
    qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358
    qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367
    qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364
    qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358
    qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362
    qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372
    qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374
    qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376
    qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374
    qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372
    qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359
    qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362
    qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368
    qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378
    qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367
    qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364

That is, 20 flushes. Note how a static partitioning approach uses
the code buffer poorly, leading to many unnecessary flushes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
34184b0718 tcg: allocate optimizer temps with tcg_malloc
Groundwork for supporting multiple TCG contexts.

While at it, also allocate temps_used directly as a bitmap of the
required size, instead of using a bitmap of TCG_MAX_TEMPS via
TCGTempSet.

Performance-wise we lose about 1.12% in a translation-heavy workload
such as booting+shutting down debian-arm:

Performance counter stats for 'taskset -c 0 arm-softmmu/qemu-system-arm \
	-machine type=virt -nographic -smp 1 -m 4096 \
	-netdev user,id=unet,hostfwd=tcp::2222-:22 \
	-device virtio-net-device,netdev=unet \
	-drive file=die-on-boot.qcow2,id=myblock,index=0,if=none \
	-device virtio-blk-device,drive=myblock \
	-kernel kernel.img -append console=ttyAMA0 root=/dev/vda1 \
	-name arm,debug-threads=on -smp 1' (10 runs):

             exec time (s)  Relative slowdown wrt original (%)
---------------------------------------------------------------
 original     20.213321616                                  0.
 tcg_malloc   20.441130078                           1.1270214
 TCGContext   20.477846517                           1.3086662
 g_malloc     20.780527895                           2.8061013

The other two alternatives shown in the table are:
- TCGContext: embed temps[TCG_MAX_TEMPS] and TCGTempSet used_temps
  in TCGContext. This is simple enough but it isn't faster than using
  tcg_malloc; moreover, it wastes memory.
- g_malloc: allocate/deallocate both temps and used_temps every time
  tcg_optimize is executed.

Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
c3fac1138e tcg: distribute profiling counters across TCGContext's
This is groundwork for supporting multiple TCG contexts.

To avoid scalability issues when profiling info is enabled, this patch
makes the profiling info counters distributed via the following changes:

1) Consolidate profile info into its own struct, TCGProfile, which
   TCGContext also includes. Note that tcg_table_op_count is brought
   into TCGProfile after dropping the tcg_ prefix.
2) Iterate over the TCG contexts in the system to obtain the total counts.

This change also requires updating the accessors to TCGProfile fields to
use atomic_read/set whenever there may be conflicting accesses (as defined
in C11) to them.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
df2cce2968 tcg: introduce **tcg_ctxs to keep track of all TCGContext's
Groundwork for supporting multiple TCG contexts.

Note that having n_tcg_ctxs is unnecessary. However, it is
convenient to have it, since it will simplify iterating over the
array: we'll have just a for loop instead of having to iterate
over a NULL-terminated array (which would require n+1 elems)
or having to check with ifdef's for usermode/softmmu.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
26689780f8 gen-icount: fold exitreq_label into TCGContext
Groundwork for supporting multiple TCG contexts.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
b1311c4acf tcg: define tcg_init_ctx and make tcg_ctx a pointer
Groundwork for supporting multiple TCG contexts.

The core of this patch is this change to tcg/tcg.h:

> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;

Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
44ded3d048 tcg: take tb_ctx out of TCGContext
Groundwork for supporting multiple TCG contexts.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
e82d5a2460 tcg: check CF_PARALLEL instead of parallel_cpus
Thereby decoupling the resulting translated code from the current state
of the system.

The tb->cflags field is not passed to tcg generation functions. So
we add a field to TCGContext, storing there a copy of tb->cflags.

Most architectures have <= 32 registers, which results in a 4-byte hole
in TCGContext. Use this hole for the new field.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
4e2ca83e71 tcg: define CF_PARALLEL and use it for TB hashing along with CF_COUNT_MASK
This will enable us to decouple code translation from the value
of parallel_cpus at any given time. It will also help us minimize
TB flushes when generating code via EXCP_ATOMIC.

Note that the declaration of parallel_cpus is brought to exec-all.h
to be able to define there the "curr_cflags" inline.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:41 -07:00
Richard Henderson
e89b28a635 tcg: Use offsets not indices for TCGv_*
Using the offset of a temporary, relative to TCGContext, rather than
its index means that we don't use 0.  That leaves offset 0 free for
a NULL representation without having to leave index 0 unused.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:36 -07:00
Richard Henderson
11f4e8f8bf tcg: Remove TCGV_EQUAL*
When we used structures for TCGv_*, we needed a macro in order to
perform a comparison.  Now that we use pointers, this is just clutter.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 21:50:15 +02:00
Richard Henderson
dc41aa7d34 tcg: Remove GET_TCGV_* and MAKE_TCGV_*
The GET and MAKE functions weren't really specific enough.
We now have a full complement of functions that convert exactly
between temporaries, arguments, tcgv pointers, and indices.

The target/sparc change is also a bug fix, which would have affected
a host that defines TCG_TARGET_HAS_extr[lh]_i64_i32, i.e. MIPS64.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 21:49:30 +02:00
Richard Henderson
085272b35e tcg: Introduce temp_tcgv_{i32,i64,ptr}
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 21:48:59 +02:00
Richard Henderson
ae8b75dc6e tcg: Introduce tcgv_{i32,i64,ptr}_{arg,temp}
Transform TCGv_* to an "argument" or a temporary.
For now, an argument is simply the temporary index.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 21:47:46 +02:00
Richard Henderson
960c50e077 tcg: Push tcg_ctx into tcg_gen_callN
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 21:47:29 +02:00
Richard Henderson
b7e8b17a77 tcg: Push tcg_ctx into generator functions
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 21:45:07 +02:00
Richard Henderson
6349039d0b tcg: Use per-temp state data in optimize
While we're touching many of the lines anyway, adjust the naming
of the functions to better distinguish when "TCGArg" vs "TCGTemp"
should be used.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:45:07 +02:00
Richard Henderson
54534d7cfd tcg: Remove unused TCG_CALL_DUMMY_TCGV
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:45:07 +02:00
Richard Henderson
2272e4a791 tcg: Change temp_allocate_frame arg to TCGTemp
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:44:52 +02:00
Richard Henderson
ac3b88911e tcg: Avoid loops against variable bounds
Copy s->nb_globals or s->nb_temps to a local variable for the purposes
of iteration.  This should allow the compiler to use low-overhead
looping constructs on some hosts.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:44:34 +02:00
Richard Henderson
b83eabeac0 tcg: Use per-temp state data in liveness
This avoids having to allocate external memory for each temporary.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:44:34 +02:00
Richard Henderson
1807f4c400 tcg: Introduce temp_arg, export temp_idx
At the same time, drop the TCGContext argument and use tcg_ctx instead.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:44:12 +02:00
Richard Henderson
c6c7d84df8 tcg: Return NULL temp for TCG_CALL_DUMMY_ARG
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:44:02 +02:00
Richard Henderson
fa477d2547 tcg: Add temp_global bit to TCGTemp
This avoids needing to test the index of a temp against nb_globals.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:43:50 +02:00
Richard Henderson
434391390b tcg: Introduce arg_temp
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:43:36 +02:00
Richard Henderson
dd18629201 tcg: Propagate TCGOp down to allocators
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:34:47 +02:00
Richard Henderson
efee3746fa tcg: Propagate args to op->args in tcg.c
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:34:47 +02:00
Richard Henderson
acd937019b tcg: Propagate args to op->args in optimizer
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:34:47 +02:00
Richard Henderson
75e8b9b7aa tcg: Merge opcode arguments into TCGOp
Rather than have a separate buffer of 10*max_ops entries,
give each opcode 10 entries.  The result is actually a bit
smaller and should have slightly more cache locality.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-10-24 21:34:47 +02:00
Jiang Biao
8df8d529ed tcg/mips: delete commented out extern keyword.
Delete commented out extern keyword on link_error().

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Message-Id: <1506762042-32145-1-git-send-email-jiang.biao2@zte.com.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 09:45:01 -07:00
Emilio G. Cota
a505785cd2 tcg: define TCG_HIGHWATER
Will come in handy very soon.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 09:45:00 -07:00
Emilio G. Cota
619205fd1f tcg: take .helpers out of TCGContext
Groundwork for supporting multiple TCG contexts.

The hash table becomes read-only after it is filled in,
so we can save space by keeping just a global pointer to it.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 07:37:10 -07:00
Emilio G. Cota
5e75150cdf tci: move tci_regs to tcg_qemu_tb_exec's stack
Groundwork for supporting multiple TCG contexts.

Compile-tested for all targets on an x86_64 host.

Suggested-by: Richard Henderson <rth@twiddle.net>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 07:37:10 -07:00
Emilio G. Cota
e7e168f413 exec-all: extract tb->tc_* into a separate struct tc_tb
In preparation for adding tc.size to be able to keep track of
TB's using the binary search tree implementation from glib.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 07:37:10 -07:00
Emilio G. Cota
7f11636dbe tcg: remove addr argument from lookup_tb_ptr
It is unlikely that we will ever want to call this helper passing
an argument other than the current PC. So just remove the argument,
and use the pc we already get from cpu_get_tb_cpu_state.

This change paves the way to having a common "tb_lookup" function.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 07:37:10 -07:00
Emilio G. Cota
d453ec7825 tcg/mips: constify tcg_target_callee_save_regs
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 07:37:10 -07:00
Emilio G. Cota
e268f4c036 tcg/i386: constify tcg_target_callee_save_regs
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 07:37:10 -07:00
Richard Henderson
89b2e37e65 tcg/mips: Fully convert tcg_target_op_def
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
9be44a16c2 tcg/sparc: Fully convert tcg_target_op_def
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
6cb3658a04 tcg/ppc: Fully convert tcg_target_op_def
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
7536b82d28 tcg/arm: Fully convert tcg_target_op_def
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
1897cc2eb8 tcg/aarch64: Fully convert tcg_target_op_def
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
80a8b9a910 tcg: Fix types in tcg_regset_{set,reset}_reg
There was a potential problem here with an ILP32 host
with 64 host registers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
f46934df66 tcg: Remove tcg_regset_set32
It's not even clear what the interface REG and VAL32 were supposed to mean.
All uses had REG = 0 and VAL32 was the bitset assigned to the destination.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
07ddf036fa tcg: Remove tcg_regset_{or,and,andnot,not}
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
d21369f5fb tcg: Remove tcg_regset_set
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
ccb1bb66ea tcg: Remove tcg_regset_clear
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Richard Henderson
be0f34b584 tcg: Add tcg_op_supported
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Philippe Mathieu-Daudé
61a3f8f6c0 accel/tcg: move tcg-runtime to accel/tcg/
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911213328.9701-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Philippe Mathieu-Daudé
ba026602a6 tcg/ppc: disable atomic write check on ppc32
This fixes building for ppc64 on ppc32 (changed in 5964fca8a1):

tcg/ppc/tcg-target.inc.c: In function 'tb_target_set_jmp_target':
include/qemu/compiler.h:86:30: error: static assertion failed: \
  "not expecting: sizeof(*(uint64_t *)jmp_addr) > ATOMIC_REG_SIZE"
	QEMU_BUILD_BUG_ON(sizeof(*ptr) > ATOMIC_REG_SIZE); \
	^
tcg/ppc/tcg-target.inc.c:1377:9: note: in expansion of macro 'atomic_set'
	atomic_set((uint64_t *)jmp_addr, pair);
	^

Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911204936.5020-1-f4bug@amsat.org>
[rth: Added commentary requested by pmm.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00
Philippe Mathieu-Daudé
04ef33052c tcg/tci: do not use ldst label (never implemented)
changed in 659ef5cbb8, this fixes building with --enable-tcg-interpreter:

/home/travis/build/qemu/qemu/tcg/tcg.c:116:14: error: ‘tcg_out_ldst_finalize’ used but never defined [-Werror]
 static bool tcg_out_ldst_finalize(TCGContext *s);
              ^

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170911022839.23231-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-11 19:24:05 +01:00
Richard Henderson
53c89efd02 tcg/ppc: Use constant pool for movi
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07 11:57:35 -07:00
Richard Henderson
77bfc7c0b4 tcg/ppc: Look for shifted constants
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07 11:57:35 -07:00
Richard Henderson
5964fca8a1 tcg/ppc: Change TCG_REG_RA to TCG_REG_TB
At this point the conversion is a wash.  Loading of TB+ofs is
smaller, but the actual return address from exit_tb is larger.
There are a few more insns required to transition between TBs.

But the expectation is that accesses to the constant pool will
on the whole be smaller.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07 11:57:35 -07:00
Richard Henderson
afe74dbd6a tcg/arm: Use constant pool for call
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07 11:57:35 -07:00