'git shortlog d4f7d90f..ece025f5' says:
Alex Williamson (4):
seabios q35: Enable all PIRQn IRQs at startup
seabios q35: Add new PCI slot to irq routing function
seabios: Add a dummy PCI slot to irq mapping function
pciinit: Enable default VGA device
Asias He (2):
virtio-scsi: Set _DRIVER_OK flag before scsi target scanning
virtio-scsi: Pack struct virtio_scsi_{req_cmd,resp_cmd}
Avik Sil (1):
USB-EHCI: Fix null pointer assignment
Christian Gmeiner (5):
geodevga: fix errors in geode_fp_* functions
geodevga: move framebuffer setup
geodevga: move output setup to own function
geodevga: add debug to msr functions
geodevga: fix wrong define name
David Woodhouse (26):
Add macros for pushing and popping struct bregs
Clean up #if in pirtable.c. CONFIG_PIRTABLE can't be set if CONFIG_COREBOOT is
post: Export functions which will be used individually by CSM
Export callrom() for CSM to use
Export copy_smbios() from biostables.c
Import LegacyBios.h from OVMF
Complete and checksum EFI_COMPATIBILITY16_TABLE at build time
Add pic_save_mask() and pic_restore_mask() functions
Add CSM support
Add README.CSM
Add find_pmtimer() function
Enable PMTIMER for CSM build
Fix rom_reserve()/rom_confirm() for CSM oprom dispatch
Don't calibrate TSC if PMTIMER is already set up
Move find_pmtimer() to ACPI table setup where it logically belongs
Use find_pmtimer() after copying Xen ACPI tables
Use find_pmtimer() after copying coreboot ACPI tables
Unify return path for CSM to go via csm_return()
Make CONFIG_OPTIONROMS_DEPLOYED depend on CONFIG_QEMU
Implement !CONFIG_OPTIONROMS support for CSM
Implement !CONFIG_BOOT for CSM
Enable VGA output when settings bochs-specific mode
Disable CONFIG_THREAD_OPTIONROMS for CSM build
Fix return type of le64_to_cpu() and be64_to_cpu()
Rename find_pmtimer() to find_acpi_features()
Add acpi_reboot() reset method using RESET_REG
Gerd Hoffmann (6):
config: allow DEBUG_IO for !QEMU
coreboot: add qemu detection
tweak coreboot qemu detection
apm: fix shutdown
ahci: add missing check for allocation failure
fix buildversion.sh
Hu Tao (1):
Add pvpanic device driver
Kevin O'Connor (101):
pmm: Use 'struct segoff_s' in pmm header.
Minor: Update README - variable changes are now reset on soft-reboots.
Normalize POST initialization function name suffixes.
POST: Reorganize post init functions for better grouping and reusability.
Fix rebase error in commit 8a0a972f that broke LOWMEM variables.
Support calling a function other than maininit() from reloc_preinit().
Ensure exported symbols are visible in the final link
POST: Move QEMU specific ramsize and BIOS table setup to paravirt.c.
POST: Reorganize post entry and "preinit" functions.
POST: Move cpu caching and dma setup to platform_hardware_setup().
Undo incorrect assumptions about Xen in commit 6ca0460f.
Determine century during init and store in VARLOW mem during runtime.
No need to check both CONFIG_THREADS and CONFIG_THREAD_OPTIONROMS.
Add runningOnQEMU() and runningOnXen() for runtime platform detection.
Consistently use CONFIG_COREBOOT, CONFIG_QEMU, and runningOnXen().
Convert kvm_para_available() to runningOnKVM().
Minor - move definitions to paravirt.c from paravirt.h.
Only perform SMP setup on QEMU.
Start device_hardware_setup in mainint even with CONFIG_THREAD_OPTIONROMS.
The mathcp setup touches the PIC and thus move to the "setup" phase.
Update tools/acpi_extract.py to handle iasl 20130117 release.
Support skipping content when reading from QEMU fw_cfg romfile entries.
Convert fw_cfg ACPI entries into romfile entries.
Convert fw_cfg SMBIOS entries into romfile entries.
Convert basic integer fw_cfg entries into romfile entries.
Convert fw_cfg NUMA entries into a romfile entry.
Process fw_cfg e820 entries during the fw_cfg setup stage.
Integrate qemu_cfg_preinit() into qemu_romfile_init().
Group QEMU platform setup together and move to paravirt.c.
vgabios: Bochs/QEMU vgabios support should depend on CONFIG_QEMU.
Warn on unaligned PCI ROM structure in option roms.
Fix Makefile - don't reference "out/" directly, instead use "$(OUT)".
build: Don't require $(OUT) to be a sub-directory of the main directory.
Rename rom_get_top() to rom_get_max().
Report on f-segment UMB ram also.
Clarify build generated "zone low" values.
Verify CC is valid during build tests.
Disable handle_post() on CSM builds.
Remove unnecessary "export" declarations from assembler functions.
Minor assembler enhancements to __csm_return.
Introduce VARFSEG for variables that will reside in the f-segment.
Convert VAR16VISIBLE, VAR16EXPORT, and VAR32VISIBLE to VARFSEG.
Don't relocate "varlow" variable references at runtime.
Move malloc's ZoneFSeg and ZoneLow setup to malloc_init.
Calculate "RamSize" needed by 16bit interface dynamically.
Eliminate separate BiosTableSpace[] space for f-segment allocations.
Use CONFIG_ prefix for Kconfig variables; use BUILD_ for others.
Try to detect an unsuccessful hard-reboot to prevent soft-reboot loops.
Minor - fix confusing final_sec32low_start name in layoutrom.py.
Minor - introduce numeric defines for the IVT offset of hw irqs.
Separate out 16bit PCI-BIOS entry point from regular int 0x1a entry point.
Support using the "extra stack" for all 16bit irq entry points.
Minor - improve comments and grouping of handle_08().
floppy: Introduce 'struct floppy_pio_s' for floppy PIO ops.
floppy: Cleanup floppy irq wait handling.
floppy: Clean up Check Interrupt Status code.
floppy: Move recalibration and results parsing to floppy_cmd().
floppy: Improve floppy_pio() error checking.
floppy: Implement media format sensing.
floppy: Actually do controller reset in floppy_reset().
Minor - note that passing QEMU config via cmos is deprecated.
Cache boot-fail-wait to avoid romfile access after POST.
Rename src/ssdt-susp.dsl to src/ssdt-misc.dsl.
acpi: Eliminate BDAT parameter passing to DSDT code.
Add additional dependency checks to Makefile.
Don't use __FILE__ in virtio-ring.c.
shadow: Don't use PCIDevices list in make_bios_readonly().
smm: Don't use PCIDevices list in smm_setup().
Add VARVERIFY32INIT attribute for variables only available during "init".
Use VARVERIFY32INIT on global variables that point to "tmp" memory.
vgabios: Fix stdvga_perform_gray_scale_summing().
vgabios: Fix cirrus memory clear on mode switch.
Minor - add missing newline to floppy debug statement.
Fix bug in NUMA node setup - don't create SRAT if NUMA not present.
Update README - copy *.aml files for QEMU.
Add dependencies to vgafixup.py and buildversion.sh scripts.
Set ZF prior to keyboard read call in check_for_keystroke().
mptable: Don't describe pci-to-pci bridges.
mptable: Use same PCI irqs as ACPI code.
Cleanup QEMU_CFG_NUMA fw_cfg processing - split into two romfile entries.
Use container_of on romfile entries.
acpi: Move ACPI table definitions from acpi.c to acpi.h.
acpi: Remove dead code with descriptions of bit flags.
acpi: Use cpu_to_leXX() consistently.
Minor - explicitly close files in buildrom.py.
Minor - move "tracked memory alloc" code in pmm.c.
Introduce and convert pmm code to use standard list helpers.
Minor - relocate code in stacks.c to keep low-level thread code together.
Introduce helper function have_threads() in stacks.c.
Convert stacks.c to use standard list manipulation code.
Convert boot.c to use standard list manipulation code.
Convert pciinit.c to use standard list manipulation code.
Convert PCIDevices list to use standard list manipultion code.
Revert "Convert pciinit.c to use standard list manipulation code."
Fix error in hlist_for_each_entry_safe macro.
Convert pciinit.c to use standard list manipulation code.
make qemu_cfg_init depend on QEMU_HARDWARE instead of QEMU
Another fix for hlist_for_each_entry_safe.
Minor - remove debugging dprintf added to pciinit.c.
Fix USB EHCI detection that was broken in hlist conversion of PCIDevices.
Fix bug in CBFS file walking with compressed files.
Laszlo Ersek (1):
Enable VGA output when setting Cirrus-specific mode
Michael S. Tsirkin (2):
acpi: make default DSDT optional
acpi: sync FADT flags from PIIX4 to Q35
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rebuild of the virtio-ccw rom containing these patches:
1. s390/ipl: Fix waiting for virtio processing
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The guest side must not manipulate the index for the used buffers. Instead,
remember the state of the used buffer locally and wait until it has moved.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
# By Alexander Graf (1) and others
# Via Alexander Graf
* agraf/s390-for-upstream:
s390: update s390-ccw.img
s390/ipl: Fix boot order
s390/IPL: Allow boot from other ssid than 0
Message-id: 1375092324-23943-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This enables the following patches:
s390/IPL: Allow boot from other ssid than 0
s390/ipl: Fix spurious errors in virtio
Signed-off-by: Alexander Graf <agraf@suse.de>
We now take the subchannel set id also into account to find the boot device.
If we want to use a subchannel set other than the default set 0, we first
need to enable the mss facility.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The new rules in Makefile allow building installers for QEMU on Windows
using NSIS, a package which is also available for Linux distributions
(so cross builds are possible).
The rules for NSIS are in qemu.nsi which also uses two new images.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Changes summary (git shortlog rel-1.7.2.2..rel-1.7.3):
Alex Williamson (4):
seabios q35: Enable all PIRQn IRQs at startup
seabios q35: Add new PCI slot to irq routing function
seabios: Add a dummy PCI slot to irq mapping function
pciinit: Enable default VGA device
Asias He (2):
virtio-scsi: Set _DRIVER_OK flag before scsi target scanning
virtio-scsi: Pack struct virtio_scsi_{req_cmd,resp_cmd}
Avik Sil (1):
USB-EHCI: Fix null pointer assignment
Christian Gmeiner (5):
geodevga: fix errors in geode_fp_* functions
geodevga: move framebuffer setup
geodevga: move output setup to own function
geodevga: add debug to msr functions
geodevga: fix wrong define name
David Woodhouse (26):
Add macros for pushing and popping struct bregs
Clean up #if in pirtable.c. CONFIG_PIRTABLE can't be set if CONFIG_COREBOOT is
post: Export functions which will be used individually by CSM
Export callrom() for CSM to use
Export copy_smbios() from biostables.c
Import LegacyBios.h from OVMF
Complete and checksum EFI_COMPATIBILITY16_TABLE at build time
Add pic_save_mask() and pic_restore_mask() functions
Add CSM support
Add README.CSM
Add find_pmtimer() function
Enable PMTIMER for CSM build
Fix rom_reserve()/rom_confirm() for CSM oprom dispatch
Don't calibrate TSC if PMTIMER is already set up
Move find_pmtimer() to ACPI table setup where it logically belongs
Use find_pmtimer() after copying Xen ACPI tables
Use find_pmtimer() after copying coreboot ACPI tables
Unify return path for CSM to go via csm_return()
Make CONFIG_OPTIONROMS_DEPLOYED depend on CONFIG_QEMU
Implement !CONFIG_OPTIONROMS support for CSM
Implement !CONFIG_BOOT for CSM
Enable VGA output when settings bochs-specific mode
Disable CONFIG_THREAD_OPTIONROMS for CSM build
Fix return type of le64_to_cpu() and be64_to_cpu()
Rename find_pmtimer() to find_acpi_features()
Add acpi_reboot() reset method using RESET_REG
Gerd Hoffmann (3):
config: allow DEBUG_IO for !QEMU
coreboot: add qemu detection
tweak coreboot qemu detection
Hu Tao (1):
Add pvpanic device driver
Kevin O'Connor (99):
pmm: Use 'struct segoff_s' in pmm header.
Minor: Update README - variable changes are now reset on soft-reboots.
Normalize POST initialization function name suffixes.
POST: Reorganize post init functions for better grouping and reusability.
Fix rebase error in commit 8a0a972f that broke LOWMEM variables.
Support calling a function other than maininit() from reloc_preinit().
Ensure exported symbols are visible in the final link
POST: Move QEMU specific ramsize and BIOS table setup to paravirt.c.
POST: Reorganize post entry and "preinit" functions.
POST: Move cpu caching and dma setup to platform_hardware_setup().
Undo incorrect assumptions about Xen in commit 6ca0460f.
Determine century during init and store in VARLOW mem during runtime.
No need to check both CONFIG_THREADS and CONFIG_THREAD_OPTIONROMS.
Add runningOnQEMU() and runningOnXen() for runtime platform detection.
Consistently use CONFIG_COREBOOT, CONFIG_QEMU, and runningOnXen().
Convert kvm_para_available() to runningOnKVM().
Minor - move definitions to paravirt.c from paravirt.h.
Only perform SMP setup on QEMU.
Start device_hardware_setup in mainint even with CONFIG_THREAD_OPTIONROMS.
The mathcp setup touches the PIC and thus move to the "setup" phase.
Update tools/acpi_extract.py to handle iasl 20130117 release.
Support skipping content when reading from QEMU fw_cfg romfile entries.
Convert fw_cfg ACPI entries into romfile entries.
Convert fw_cfg SMBIOS entries into romfile entries.
Convert basic integer fw_cfg entries into romfile entries.
Convert fw_cfg NUMA entries into a romfile entry.
Process fw_cfg e820 entries during the fw_cfg setup stage.
Integrate qemu_cfg_preinit() into qemu_romfile_init().
Group QEMU platform setup together and move to paravirt.c.
vgabios: Bochs/QEMU vgabios support should depend on CONFIG_QEMU.
Warn on unaligned PCI ROM structure in option roms.
Fix Makefile - don't reference "out/" directly, instead use "$(OUT)".
build: Don't require $(OUT) to be a sub-directory of the main directory.
Rename rom_get_top() to rom_get_max().
Report on f-segment UMB ram also.
Clarify build generated "zone low" values.
Verify CC is valid during build tests.
Disable handle_post() on CSM builds.
Remove unnecessary "export" declarations from assembler functions.
Minor assembler enhancements to __csm_return.
Introduce VARFSEG for variables that will reside in the f-segment.
Convert VAR16VISIBLE, VAR16EXPORT, and VAR32VISIBLE to VARFSEG.
Don't relocate "varlow" variable references at runtime.
Move malloc's ZoneFSeg and ZoneLow setup to malloc_init.
Calculate "RamSize" needed by 16bit interface dynamically.
Eliminate separate BiosTableSpace[] space for f-segment allocations.
Use CONFIG_ prefix for Kconfig variables; use BUILD_ for others.
Try to detect an unsuccessful hard-reboot to prevent soft-reboot loops.
Minor - fix confusing final_sec32low_start name in layoutrom.py.
Minor - introduce numeric defines for the IVT offset of hw irqs.
Separate out 16bit PCI-BIOS entry point from regular int 0x1a entry point.
Support using the "extra stack" for all 16bit irq entry points.
Minor - improve comments and grouping of handle_08().
floppy: Introduce 'struct floppy_pio_s' for floppy PIO ops.
floppy: Cleanup floppy irq wait handling.
floppy: Clean up Check Interrupt Status code.
floppy: Move recalibration and results parsing to floppy_cmd().
floppy: Improve floppy_pio() error checking.
floppy: Implement media format sensing.
floppy: Actually do controller reset in floppy_reset().
Minor - note that passing QEMU config via cmos is deprecated.
Cache boot-fail-wait to avoid romfile access after POST.
Rename src/ssdt-susp.dsl to src/ssdt-misc.dsl.
acpi: Eliminate BDAT parameter passing to DSDT code.
Add additional dependency checks to Makefile.
Don't use __FILE__ in virtio-ring.c.
shadow: Don't use PCIDevices list in make_bios_readonly().
smm: Don't use PCIDevices list in smm_setup().
Add VARVERIFY32INIT attribute for variables only available during "init".
Use VARVERIFY32INIT on global variables that point to "tmp" memory.
vgabios: Fix stdvga_perform_gray_scale_summing().
vgabios: Fix cirrus memory clear on mode switch.
Minor - add missing newline to floppy debug statement.
Fix bug in NUMA node setup - don't create SRAT if NUMA not present.
Update README - copy *.aml files for QEMU.
Add dependencies to vgafixup.py and buildversion.sh scripts.
Set ZF prior to keyboard read call in check_for_keystroke().
mptable: Don't describe pci-to-pci bridges.
mptable: Use same PCI irqs as ACPI code.
Cleanup QEMU_CFG_NUMA fw_cfg processing - split into two romfile entries.
Use container_of on romfile entries.
acpi: Move ACPI table definitions from acpi.c to acpi.h.
acpi: Remove dead code with descriptions of bit flags.
acpi: Use cpu_to_leXX() consistently.
Minor - explicitly close files in buildrom.py.
Minor - move "tracked memory alloc" code in pmm.c.
Introduce and convert pmm code to use standard list helpers.
Minor - relocate code in stacks.c to keep low-level thread code together.
Introduce helper function have_threads() in stacks.c.
Convert stacks.c to use standard list manipulation code.
Convert boot.c to use standard list manipulation code.
Convert pciinit.c to use standard list manipulation code.
Convert PCIDevices list to use standard list manipultion code.
Revert "Convert pciinit.c to use standard list manipulation code."
Fix error in hlist_for_each_entry_safe macro.
Convert pciinit.c to use standard list manipulation code.
make qemu_cfg_init depend on QEMU_HARDWARE instead of QEMU
Another fix for hlist_for_each_entry_safe.
Minor - remove debugging dprintf added to pciinit.c.
Laszlo Ersek (1):
Enable VGA output when setting Cirrus-specific mode
Michael S. Tsirkin (1):
acpi: make default DSDT optional
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1372018066-21822-4-git-send-email-mail@kevin-wolf.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The upper_mem field of the Multiboot information struct doesn't really
contain the RAM size - 1 MB like we used to calculate it, but only the
memory from 1 MB up to the first (upper) memory hole.
In order to correctly retrieve this information, the multiboot ROM now
looks at the mmap it creates anyway and tries to find the size of
contiguous usable memory from 1 MB.
Drop the multiboot.c definition of lower_mem and upper_mem because both
are queried at runtime now.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1372018066-21822-3-git-send-email-mail@kevin-wolf.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the BIOS returns ebx = 0, the current entry is still valid and
needs to be included in the Multiboot memory map.
Fixing this meant that using bx as the entry index doesn't work any
more because it's 0 on the last entry (and it was SeaBIOS-specific
anyway), so the whole loop had to change a bit and should be more
generic as a result (ebx can be an arbitrary continuation number now,
and the entry size returned by the BIOS is used instead of hard-coding
20 bytes).
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1372018066-21822-2-git-send-email-mail@kevin-wolf.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current icon looks pretty terrible rendered in Gnome. This
switches to a transparent SVG which looks much nicer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the ccw ipl code sometimes an error message like
"virtio: trying to map MMIO memory" or
"Guest moved used index from %u to %u" appeared. Turns out
that the ccw bios did not zero out the vring, which might
cause stale values in avail->idx and friends, especially
on reboot.
Lets zero out the relevant fields. To activate the patch we
need to rebuild s390-ccw.img as well.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1369309901-418-1-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git shortlog from 1.7.2.1
Asias He (2):
virtio-scsi: Pack struct virtio_scsi_{req_cmd,resp_cmd}
virtio-scsi: Set _DRIVER_OK flag before scsi target scanning
Kevin O'Connor (1):
Cache boot-fail-wait to avoid romfile access after POST.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390: update s390-ccw.img
S390: BIOS boot from given device
S390: Add virtio-blk boot
S390: Merging s390_ipl_cpu and s390_ipl_reset
S390: BIOS create link to src folder for .img file
S390: BIOS check for file
Use the passed device, if there is no device, use the first applicable device.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Minor SLOF fixes which are required for libvirtd to function properly:
* vio-vscsi: vscsi-report-luns can return 0
* vio-vscsi: added a proper lun parser
* SLOF: vio-vscsi: fixed bug with reported luns
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have all the source code ready, add a compiled blob into
the QEMU source tree, so that people without access to an s390 compiler
can run the s390-ccw firmware.
Signed-off-by: Alexander Graf <agraf@suse.de>
Ask the host about the configuration instead of guessing it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Try to handle at least some of the errors that may happen.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
- Use tpi + tsch to get interrupts.
- Return an error if the irb indicates problems.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
stsch is the canonical way to detect devices. As a bonus, we can
abort the loop if we get cc 3, and we need to check only the valid
devices (dnv set).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Lets fix this gcc warning:
virtio.c: In function ‘vring_send_buf’:
virtio.c:125:35: error: operation on ‘vr->next_idx’ may be undefined
[-Werror=sequence-point]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have to call strip with s390-ccw.elf as input and
s390-ccw.img as output
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
dont waste cpu power on an error condition. Lets stop the guest
with a disabled wait.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a makefile, so we can build our ccw firmware. Also
add the resulting binaries to .gitignore, so that nobody is annoyed
they might be in the tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
On s390, there is an architected boot map format that we can read to
boot a certain entry off the disk. Implement a simple reader for this
that always boots the first (default) entry.
Signed-off-by: Alexander Graf <agraf@suse.de>
Like all great programs, we have to call between different functions in
different object files. And all of them need a common ground of defines.
Provide a file that provides these defines.
Signed-off-by: Alexander Graf <agraf@suse.de>
In order to boot, we need to be able to access a virtio-blk device through
the CCW bus. Implement support for this.
Signed-off-by: Alexander Graf <agraf@suse.de>
In order to communicate with the user, we need an I/O mechanism that he
can read. Implement SCLP ASCII support, which happens to be the default
in the s390 ccw machine.
This file is missing read support for now. It can only print messages.
Signed-off-by: Alexander Graf <agraf@suse.de>
This C file is the main driving piece of the s390 ccw firmware. It
provides a search for a workable block device, sets it as the default
to boot off of and boots from it.
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to write most of our code in C, so add a small assembly
stub that jumps straight into C code for us to continue booting.
Signed-off-by: Alexander Graf <agraf@suse.de>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alex Williamson (3):
seabios q35: Enable all PIRQn IRQs at startup
seabios q35: Add new PCI slot to irq routing function
seabios: Add a dummy PCI slot to irq mapping function
Avik Sil (1):
USB-EHCI: Fix null pointer assignment
Kevin O'Connor (4):
Update tools/acpi_extract.py to handle iasl 20130117 release.
Fix Makefile - don't reference "out/" directly, instead use "$(OUT)".
build: Don't require $(OUT) to be a sub-directory of the main
directory.
Verify CC is valid during build tests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 10442558ab.
With the updated OpenBIOS image, -M g3beige fails to boot quik.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1360796292-27078-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
SeaBIOS is really close to spilling over to 256k. Until we can better
handle migration across RAM block size changes, recompile SeaBIOS with
a compiler that causes the binary to still fit in 128k.
This was built with:
gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC)
On 64-bit Fedora 18.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Not that many changes as we have a pretty recent git snapshot in master
already:
Hannes Reinecke (1):
megasas: Invert PCI device selection
Kevin O'Connor (2):
Minor: Separate UUID display from F12 boot prompt.
boot: Support "halt" in the boot order to prevent default boot attempts.
Laszlo Ersek (1):
display_uuid(): fix incomplete check after the loop
Paolo Bonzini (1):
vgabios: implement AX=1120H..1124H functions
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (40 commits)
pseries: Increase default NVRAM size
target-ppc: Don't use hwaddr to represent hardware state
PPC: e500: pci: Export slot2irq calculation
PPC: E500plat: Make a lot of PCI slots available
PPC: E500: Move PCI slot information into params
PPC: E500: Generate dt pci irq map dynamically
PPC: E500: PCI: Make IRQ calculation more generic
PPC: E500: PCI: Make first slot qdev settable
openpic: Accelerate pending irq search
openpic: fix minor coding style issues
MSI-X: Fix endianness
PPC: e500: Declare pci bridge as bridge
PPC: e500: Add MSI support
openpic: add Shared MSI support
openpic: make brr1 model specific
openpic: convert to qdev
openpic: remove irq_out
openpic: rename openpic_t to OpenPICState
openpic: convert simple reg operations to builtin bitops
openpic: remove unused type variable
...
Now that we have implemented PAPR compatible NVRAM interfaces in qemu, this
updates the SLOF firmware to actually initialize and use the NVRAM as a
PAPR guest firmware is expected to do.
This SLOF update also includes an ugly but useful workaround for a bug in
the SLES11 installer which caused it to fail under KVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch updates seabios to latest git master. Changes:
(1) q35 patches merged.
(2) some acpi cleanups.
(3) fixes irq 8 conflict.
(3) makes this a candidate for the stable branch
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* kraxel/seabios-b1c35f2:
seabios: update binaries in pc-bios/
roms: also copy the dsdt when updating seabios.
seabios: update to b1c35f2b28cc0c94ebed8176ff61ac0e0b377798
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The e801 memory sizes in the multiboot structures hard-code the available
low memory to 640. However, the value should not include the size of the
EBDA. Fill the value in the option ROM, getting the size of low memory
from the BIOS.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Update OpenBIOS PPC image to SVN r1063 to fix issues introduced by
commit 9e56edcf. The code change in this revision only affects PPC,
so OpenBIOS SPARC images are not updated.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Update OpenBIOS images to SVN r1062. Build with GCC 4.6.0
in order to avoid boot problems introduced by GCC 4.7.[01].
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This updates SLOF to handle the necessary device tree properties for MSI
and MSI-X.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch updates the SLOF version, introducing a number of fixes:
* add proper graphics support
* fix bugs with graphical terminal under grub2
* fix bugs in handling of 64-bit unit addresses
* fix VSCSI representation to be closer to PowerVM
* fix bugs which caused grub2 to crash
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Upstream seabios commit 5a023065388287e261ae9212452ff541f9fa9cd3
Major changes since 1.7.0:
- Usual share of bugfixes and cleanups ;)
- Support for 64bit PCI bars and mapping those above 4G.
- Stack switching for real mode irq handlers to reduce
seabios stack footprint.
- Support for booting from lsi scsi hba.
- Support for booting from usb attached scsi.
- Support for non-linear apic ids.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As mentioned in http://bugs.debian.org/660154 , finnish keyboard mapping
is kind of broken. Fix it as Timo Sirainen suggests in #660154.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now that all of the device tree bits are generated during runtime, we
can get rid of the device tree blob and instead start from scratch with
an empty device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
This is a bitmap file (32x32x4) derived from the official QEMU mascot
(which was designed by Benoît Canet). I stripped the text from the SVG
to get a nearly square image and converted the result to BMP without
any manual optimization.
The bitmap is currently used by QEMU's SDL interface and replaces the
default X icon.
v2: Add qemu-icon.bmp to Makefile.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Update roms/seabios and pc-bios/bios.bin to the 1.7.0 release.
Most noticable new feature is virtio-scsi support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that we have a hard dependency on python anyway, we can replace the
slow shell script to calculate the option ROM checksum with a fast AND
portable python version. Tested both with python 2.7 and 3.1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* qemu-kvm/memory/urgent: (42 commits)
memory: check for watchpoints when getting code ram_addr
exec: fix write tlb entry misused as iotlb
Sparc: avoid AREG0 wrappers for memory access helpers
Sparc: avoid AREG0 for memory access helpers
TCG: add 5 arg helpers to def-helper.h
softmmu templates: optionally pass CPUState to memory access functions
i386: Remove REGPARM
sparc64: implement PCI and ISA irqs
sparc: reset CPU state on reset
apb: use normal PCI device header for PBM device
w64: Fix data type of next_tb and tcg_qemu_tb_exec
softfloat: fix for C99
vmstate: fix varrays with uint32_t indexes
Fix large memory chunks allocation with tcg_malloc.
hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region
hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state
hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state
ARM: Remove unnecessary subpage workarounds
malta: Fix display for LED array
malta: Use symbolic hardware addresses
...
This patch updates the SLOF firmware image used on the pseries
machine. The new version adds support for Cirrus VGA and virtfs, as
well as including a number of bugfixes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use OPTION_ROM_START/END from the common header file, add comment to
init code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Always add a byte before the final 512-bytes alignment to reserve the
space for the ROM checksum.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The CH registers is only written, never read. So we can remove these
operations and, in case of up_set_tpr, also the ECX push/pop.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This imports and builds the original VAPIC option ROM of qemu-kvm.
Its interaction with QEMU is described in the commit that introduces the
corresponding device model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The build process of optionroms spits out an "rm ..." line. Moreover, it
removes all .o files that can be handy for debugging purposes. So
disable automatic intermediate removal.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently on the pseries machine the SLOF firmware is used normally,
but we bypass it when -kernel is specified. Having these two
different boot paths can cause some confusion.
In particular at present we need to "probe" the (emulated) PCI bus and
produce device tree nodes for the PCI devices in qemu, for the -kernel
case. In the SLOF case, it takes the device tree from qemu adds some
stuff to it then passes it on to the kernel.
It's been decided that a better approach is to always boot through
SLOF, even when using -kernel. WIth this approach we can leave PCI
probing and device node creation to SLOF in all cases which removes a
bunch of code in qemu, and avoids iterating the PCI devices from the
machine specific init code which we're not supposed to do.
This patch changes qemu to always boot through SLOF, and not to create
PCI nodes. Simultaneously it updates the included version of SLOF
(submodule and binary image) to one which supports (and requires) the
new approach.
The new SLOF version also includes a number of unrelated enhancements:
support for booting from virtio-pci devices and e1000, greatly
improved FCode support and many bugfixes. It also makes SLOF ready to
be used even when specifying a kernel on the qemu command line.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Recent dtc doesn't compile our dts anymore. Change all hex numbers to have
0x prefixes, indicate the old version and recompile using recent dtc.
This doesn't change any semantics in the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
User visible changes in seabios:
- Probe HPET existence (fix for -no-hpet)
- Probe PCI existence (fix for -machine isapc)
- usb: fix boot paths
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Most QEMU files either are pure ASCII or use UTF-8.
Convert this keymap file which still used ISO-8859-1 to UTF-8.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The rom was not added together with the sgabios device and is
not installed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is a general update to the SLOF firmware image used on the
pseries machine. This doesn't contain updates for specific features but
contains a number of bugfixes and enhancements in the main SLOF tree from
Thomas Huth.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch updates the SLOF submodule and precompiled image. The new
SLOF versions contains two changes of note:
* The previous SLOF has a bug in SCSI condition handling that was
exposed by recent updates to qemu's SCSI emulation. This update
fixes the bug.
* The previous SLOF has a bug in its addressing of SCSI devices,
which can be exposed under certain conditions. The new SLOF also
fixes this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to generate the CPU nodes in machine init code, so remove them from
the device tree definition that we precompile.
Signed-off-by: Alexander Graf <agraf@suse.de>
commit 8e301472e324b6d6496d8b4ffc66863e99d7a505
user visible changes in seabios:
* ahci is enabled by default (and thus in this build).
* bootorder support for ahci.
* two-pass pci allocator (orders bars by size for better packing).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There were some changes upstream to account for broken usage of mtmsr, so
before applying the mtmsr patch we need to update OpenBIOS, otherwise the
PPC target would break.
Signed-off-by: Alexander Graf <agraf@suse.de>
When running a PPC guest with KVM that can do PV operations, we need
to indicate the guest which instructions to use for a hypercall and
that it is running as KVM guest.
This logic was available on openbios based machines already. This patch
also adds said functionality to the mpc8544ds machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
When Linux reboots an e500 VM, it writes to a magic register in the
"global-utilities" device indicated by the device tree. We were not
emulating that device so far, rendering the VM reboot-less.
This patch implements that device with only the reboot functionality
implemented and adds it to the device tree. With this patch applied,
I can successfully reboot a -M mpc8544ds VM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
The zipl bootloader rom we have has seen some dramatic speedups upstream,
so let's update it to improve the experience when booting a guest image.
This binary is based on commit id 9a0842dd9823d529f721b418d554f17c72e009e3.
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, the emulated pSeries machine requires the use of the
-kernel parameter in order to explicitly load a guest kernel. This
means booting from the virtual disk, cdrom or network is not possible.
This patch addresses this limitation by inserting a within-partition
firmware image (derived from the "SLOF" free Open Firmware project).
If -kernel is not specified, qemu will now load the SLOF image, which
has access to the qemu boot device list through the device tree, and
can boot from any of the usual virtual devices.
In order to support the new firmware, an extension to the emulated
machine/hypervisor is necessary. Unlike Linux, which expects
multi-CPU entry to be handled kexec() style, the SLOF firmware expects
only one CPU to be active at entry, and to use a hypervisor RTAS
method to enable the other CPUs one by one.
This patch also implements this 'start-cpu' method, so that SLOF can
start the secondary CPUs and marshal them into the kexec() holding
pattern ready for entry into the guest OS. Linux should, and in the
future might directly use the start-cpu method to enable initially
disabled CPUs, but for now it does require kexec() entry.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations. On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege. For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.
This patch implements such a hypercall based RTAS for our emulated pSeries
machine. A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently linuxboot.bin and multiboot.bin option roms override int19
vector to intercept boot process. No sane option rom should do that.
Provide bev entry instead that will be called by BIOS if option rom
is selected for booting.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
- cc97564 Add config option to permit running option roms with bad checksums.
- 424f217 Add config option to disable MTRR initialization.
- fb2f10d Prep version for next release.
- f18b09b Update version to 0.6.2
- 20fcf9b lets pretend that RTC can be used to wakeup from S4
- 1efb10b Expand user configurable parameters in Kconfig.
- 3dba4c2 Support non-local build directory - allow "make OUT=abc/" to work.
- 42d9771 The vgabios build must depend on autoconf.h.
- 32aa9f3 fix parallel compilation of SeaBIOS
- 713be89 Start using Kconfig to configure SeaBIOS settings.
- b623e7c Change kconfig to emit disabled symbols in autoconf.h.
- 0da7bfd Build changes for Linux kconfig code to work in seabios dir structure.
- a4c5daf Initial commit of Kconfig build tool.
- 4d0c592 Minor boot fixes.
- 812478e Minor comment / code layout improvement to romlayout.S.
- 6fc7cf1 Fix to prevent infinite loop in build_pci_path().
- f5154e2 support T13 EDD3.0 spec
- d08eb9c Add ability to track PCI paths and add to build_pci_path().
- 89a1efd Move the CBFS payload setup to later in the boot.
- 9e881a3 Extract space trimming code from ATA and use in USB and bootorder code.
- 3c241ed seabios: acpi: add _RMV control method for PCI devices
- c2002a1 Add support for finding the boot priority of USB drives.
- a5f2b91 Extend 'usb_pipe' to track the controller and ports of each device.
- 8bf5503 Add functions for boot device path parsing.
- c4bd3b9 Use bootprio_find_named_rom() for ramdisk and cbfs payload priorities.
- ca2bc1c Remove drive->desc field.
- f13a180 Minor reorganization of some of the boot_xxx code in boot.c.
- 3da2c1c Move IPL.fw_bootorder to static variables in boot.c.
- 7bb1584 Move IPL.bev to static variables in boot.c
- baaadb6 Move IPL.checkfloppysig to a global (CheckFloppySig) in boot.c.
- a0842f8 Remove Drives global struct in favor of independent global variables.
- ecbcf77 Don't access drive_g->desc from boot_cdrom().
- 551caa2 Simplify keyboard reading code in the interactive boot menu.
- 697e63c Call setup_translation() from map_hd_drive().
- 3c5e0e1 Rename add_ordered_drive() to add_drive() and use in map_hd_drive().
- 031ef55 Add stubs to permit devices to specify their boot priority.
- 72eee3e Simplify boot ordering by building an inclusive boot list.
- ce24be5 Populate drive_g->desc prior to calling add_bcv_internal().
- 74fd942 pciinit: fix off-by-one
- 311f887 Minor build fixes.
- bca3a87 Track the source of each optionrom deployed.
- c6629e0 Support qemu based romfile wrappers called out of order.
- d1a1746 Breakup boot_setup() bootorder code into its own function.
- f9b0930 Add romfile_loadfile() helper function.
- b9a7591 Read bootorder file into memory.
- 2e109a6 Add strchr() function.
- 1703ea2 Add romfile_name() function.
- b674152 Add BAID for ahci cdrom.
- f77e179 Provide full EDD 3.0 info for virtio disk
- 67863be Enhance layoutrom.py to work around a binutils quirk.
- 4c90a20 Create separate IPL entry for each CD/DVD
- 0e6f636 ahci: set controller id
- 1e924bb ahci: fix off-by-one in port count
- 7eb0222 ahci: enable io/mem/dma
- c19fc71 ahci: set dma feature flag
- 80c2b6e Check if capability enabled in XXX_cmd_data functions.
- f3fe3aa Require a "_cfuncXX_" symbol prefix for inter-mode c function references.
- d52fdf6 add ahci support
- 54fa8ec ata: make helpers available
- 0a80608 util: add memset_fl()
- f1f18eb pci: add helper functions for mmio bar access from real mode.
- af9629b Enhance call32() to pass a parameter to called function.
- 4057f98 Don't pass return address to transition(32,16,16big) on stack.
- e2623fc pciinit: use pci_region functions.
- 58a38e8 pci: introduce pci_region to manage pci io/memory/prefmemory regions.
- 6d5a217 mark irq9 active high in DSDT
- 9433098 Report meaningful error if pyserial not present in tools/readserial.py
- 94dc9c4 Show size of non-relocatable runtime code during build.
- 4d96edc Cleanup - it's no longer necessary to manually reset global variables.
- a899945 Allow rom to grow to 256K.
- 4a446d7 Fix typo preventing relocated space from being used for option roms.
- 0f67397 fix virtio-blk failure after reboot
- d4bded4 Add a debug method to AML code.
- 2f96800 Warn that ohci bulk is not supported.
- e826465 Enable optionroms to use freed space due to CONFIG_RELOCATE_INIT.
- 7f55fd3 Move the 32bit init code to high memory at runtime.
- 025cabd Move init code from _start() to post().
- 12fa24a Add memalign_tmp() helper function.
- 244caf8 Try to hard-reboot on rerun of post even on emulators.
- 5bd01de Don't do shadow copying of optionroms when CONFIG_OPTIONROMS_DEPLOYED.
- adaf373 Try to hard-reboot processor on rerun of post under coreboot.
- 402fd9c Enhance build to emit relocation information.
- d1b4f96 Separate out init code from the rest of the 32bit flat code.
- 1a4885e Modify tools/layoutrom.py to use classes instead of tuples.
- 6c2e781 Use str.startswith() in python scripts.
- d9c916e Prep version for next release.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
- 06d0bdd Minor build fixes.
- 33abfc0 Update version to 0.6.1.2.
- 484dd56 fix virtio-blk failure after reboot
- dd9c0d3 Update version to 0.6.1.1.
- 50ecfa8 mark irq9 active high in DSDT
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I'm using the Qemu program with VNC I/O, and I had some problems with
my keyboard layout, so I've prepared a definition to be included in
Qemu, built from Xorg description.
Signed-off-by: Frédéric Boiteux <fboiteux@free.fr>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Just compiled from vgabios git repo @ git.qemu.org,
copyed over and committed. Also added to the list
of blobs in the Makefile.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Patching the rom data during load (in qemu) now
also supports i82801 (which had no rom file).
We only need a single rom file for the whole device family,
so remove the second one which is no longer needed.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
signrom.sh has multiple bugs:
- the last byte is considered when calculating the existing checksum, but not
when computing the correction
- apprently the 'expr' expression overflows and produces incorrect results with
larger roms
- if the checksum happened to be zero, we calculated the correction byte to be
256
Instead of rewriting this in half a line of python, this patch fixes the bugs.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- 0ff9051 Update version to 0.6.1
- 9c000e6 Support Samsung SE-S084 USB DVD drive (and probably many others)
- eebe949 pciinit: remove unused variable, old_addr, in pci_set_io_region_addr().
- 06644f4 Minor - indentation change to jpeg.c.
- 2dcd9fa Enhance tools/readserial.py to support reading from a pipe.
- 7ce09ae Make tools/transdump.py more resilient to unknown input.
- 6039fc5 Update qemu_cfg_read to use "rep insb".
- 9a01a9c Only show bootsplash during boot menu.
- 5feb83c add write support to virtio-blk
- 22f6378 Don't try to talk to APIC on 486
- e2074bf Add ACPI SSDT/DSDT support for CPU hotplug.
- eb6dc78 Add additional debug status messages to bootsplash code.
- c8e4e88 Allow qemu to use bootsplash code via fwcfg interface.
- 597040d Add tools/trandump.py tool for converting hexdump() output.
- 48f5f8b Default bootsplash on (for coreboot users).
- 8d85eb1 Autodetect video mode based on bootsplash jpeg dimensions.
- b2b9d4a Rename "decdata" to "jpeg" in bootsplash - to be consistent with jpeg.c.
- bbc4722 Breakup jpeg_decode into parsing and displaying phases.
- 2976dd4 Avoid using BSS variables in jpeg.c.
- cc9e1bf Add FUNC16() helper macro for converting a 16bit func to a segoff_s.
- b4525a0 Handle unaligned sizes in iomemcpy().
- 0e27e19 Cleanup bootsplash vesa signature detection.
- cadaf0e Be sure to disable bootsplash on all BIOS boot cases.
- 2641186 Add call16_int10 helper to bootsplash.c.
- 6dc76f4 Don't do "double buffering" in bootsplash code.
- 227dc3e Check that malloc succeeds in bootsplash code.
- a576c9c Bootsplash fixes and cleanups.
- 9fd4851 Minor - clarify bit logic in mptable.c.
- abf31d3 Fix integer truncating bug in calc_future_timer().
- 1d5c333 seabios: pciinit: fix 64bit bar initilization.
- ae6924d Minor - introduce GDT_GRANLIMIT macro.
- 0f78889 Avoid code addresses >64K in big real mode.
- aec19c9 seabios: smm: move out piix4 specific smram logic to dev-i440fx.c
- 08328e7 seabios: shadow: make device finding more generic.
- 4c67f90 seabios: acpi: clean up of finding pm device.
- fe54a53 seabios: acpi: split out piix4 pm logic.
- d06afb4 seabios: acpi: move acpi definitions to acpi.h from acpi.c
- 2f54bb4 seabios: acpi: move out endian conversion helper function.
- 23173ac seabios: pci: introduce helper function to find device from table and initialize it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.
Remove video.x MoL hacks.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Update Sparc32 and Sparc64 OpenBIOS images to SVN revision 859.
Bring also pc-bios/README up to date including the update performed by
419ef5f1c6.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- 17d3e46 smbios: Allow all fields to be set via qemu_cfg_smbios_load_field()
- 0d6b8d5 seabios: pciinit: use pci device initializer helper function.
- 968d3a8 seabios: pci: introduce helper function to initialize a given device.
- 4e0daae virtio: Clear interrupt status register in virtio-blk
- af0963d seabios: pciinit: initialize pci bridge filtering registers.
- f441666 seabios: pciinit: pci bridge bus initialization.
- 5d0de15 seabios: pciinit: make bar offset calculation pci bridge aware.
- a65821d seabios: pciinit: factor out bar offset calculation.
- 0a8eada seabios: pciinit: make pci bar assigner preferchable memory aware.
- dfd94fa seabios: pciinit: make pci memory space assignment 64bit aware.
- b9e4721 seabios: pciinit: factor out pci bar region allocation logic.
- edd9911 seabios: pci: introduce foreachpci_in_bus() helper macro.
- f79a462 Add romfile_size() wrapper for accessing cbfs/qemu_cfg files.
- afbed1b Initial bootsplash support.
- 83d6ed6 Update TODO
- 1d7d893 Fix bvprintf() to respect padding for hex printing.
- e230426 Unify optionrom cbfs/qemu_cfg rom pulling code.
- 8cb8ba5 SeaBIOS VGA hooks
- 203f6f3 SeaBIOS CD/DVD abbreviations
- 12cbb43 seabios: remove iasl output file when error.
- d5d02b6 Allocate cdemu buffer in low mem instead of ebda.
- 8f59aa3 Introduce memcpy_fl - a memcpy on "flat" pointers.
- 42a1d4c Rework malloc to use a "first fit" algorithm.
- 34e9cc5 Minor mptable changes.
- 0f3783b virtio: clean up memory barrier usage
- bfe4d60 virtio: remove NO_NOTIFY optimization
- bb68591 Don't use RTC to time boot menu delay.
- b5cc2ca Generalize timer based delay code.
- 144817b Rename check_time() to check_tsc().
- 9c447c3 Allow wait_irq to be called in 32bit code.
- 49cc72b Improve optionrom debugging statements.
- c65a4a6 Minor - compile out usb-msc code if CONFIG_USB_MSC not set.
- 456479e Minor ata cleanups.
- 2515a72 Make sure virtio-blk is fully compiled out if not wanted.
- c4fe135 Minor - split up virtio_blk_setup().
- 4030db0 fix two issues with virtio-blk
- ea8ac63 Minor improvements to virtio (allow irqs, allocate page aligned).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit dd4239d657 broke multiboot. It replaced the
instruction "rep insb (%dx), %es:(%edi)" by the binary output of
"addr32 rep insb (%dx), %es:(%di)".
Linuxboot calls the respective helper function in a code16 section. So the
original instruction was automatically translated to its "addr32" equivalent.
For multiboot, we're running in code32 so gcc didn't add the "addr32" which
breaks the instruction.
This patch splits that helper function in one which uses addr32 and one which
does not, so everyone's happy.
The good news is that nobody probably cared so far. The bundled multiboot.bin
binary was built before the change and is thus correct.
Please also put this patch into -stable.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds a firmware blob to the S390 target. The blob is a simple
implementation of a virtio client that tries to read the second stage
bootloader from sectors described as of offset 0x20 in the MBR.
In combination with an updated zipl this allows for booting from virtio
block devices. This firmware is built from the same sources as the second
stage bootloader. You can find a virtio capable s390-tools in this repo:
git://repo.or.cz/s390-tools.git
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
- 7d09d0e Fix virtio compile errors on various gcc versions.
- 89acfa3 Support for booting from virtio disks
- 6d66316 smbios: avoid counting io hole as ram
- e5cd945 Fix error causing USB HID "boot" protocol to not be enabled.
- 0e88576 Add support for USB mice.
- dd5a8a6 When USB keyboard active, don't send keyboard commands to ps2 port.
- 5718d56 Document usb-hid.c functions.
- e438b0c Further parallelize init when using CONFIG_THREAD_OPTIONROMS.
- f59b5ac Handle unknown function addresses in tools/checkstack.py.
- 9ba1dea Simplify build by manually resolving external symbols in layoutrom.py.
- 698d3f9 USB EHCI should yield() whil waiting for controller to ack reset.
- f9a774c Add __attribute__((__malloc__)) declaration to internal malloc funcs.
- b7045ce Minor - remove redundant check from ata_try_dma.
- 67f6d37 Fix possible unitialized variable issue in usb msc.
- a7eb8fc Some improvements to optionrom preemption support.
- d28b0fe Refactor USB hub code.
- ba28541 Prep version for next release.
- 12bffd5 Update version to 0.6.0.
- 87ab2fb Improve USB EHCI timing.
- d705e5a Disable inlining on old compilers.
- bca0736 Force use of indirect function calls in inline assembler.
- d7eb27e Don't move EBDA while an optionrom is running (CONFIG_THREAD_OPTIONROMS).
- 7415270 Call to int1552 (from int1346) should set regs->dl.
- 9dc243e Adjust debug levels of device discovery.
- d9c9361 Default CONFIG_COREBOOT_FLASH on; make depend on CONFIG_COREBOOT.
- c35e1e5 Restore segment limits in handle_1589 code.
- 11cc662 Extend time for rtc to be ready.
- 4ed378a Backup and restore registers when calling out to user funcs.
- 68c5139 Enable irqs in kbd/clock calls that caller might "spin" on.
- f628244 Process event on ps2 keyboard irq even if event already read.
- a5d8458 Revert "Unify ps2 port data processing."
- b9ed5e2 Handle variable length return of ps2 port GETID command.
- 67a9eec Prevent ps2 irqs from messing up ps2 init.
- 6704cf9 Revert "Rework disabling of ps2 port irqs."
- 808939c Fix smp cpu detect on gcc 4.5.
- a979c1c Improvements to tools/checkstack.py.
- 190cc62 Add USB EHCI controller support.
- 0770d67 Some USB UHCI and OHCI fixes and cleanups.
- bfe7ca7 Minor - USB OHCI interrupt queue should be one larger.
- 09e2f7c Reduce size of USB 'struct uhci_td'.
- 406fad6 Dynamically allocate USB controller structures.
- 4547eb9 Replace USB encoded 'u32 endp' scheme with explicit struct fields.
- 8ebcac0 Further parallelize USB init by launching a thread per usb port.
- e908665 Introduce simple "mutex" locking code.
- 3b79f8b Only compile usb-hub.c and paravirt.c with 32bit code.
- 357bdfa Prefer passing a USB "pipe" structure over a USB endp encoding.
- 7fb8ba8 Add a generic "internal error" warning function.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only two boot ROM files are needed for all devices.
* Add these GPXE ROM files using new naming convention
(as discussed on qemu-devel). Both files were created
with http://rom-o-matic.net/, PCI vendor / device ids
as in ROM filenames and option BANNER_TIMEOUT = 0.
* Remove old PXE ROM file for i82559er.
It was replaced by gpxe-eepro100-80861209.rom.
* Update pc-bios/README (and sort entries).
Full support still needs additional eepro100 fixes.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- 0360e8e Seabios e820 reservation portion v3
- 7149fc8 Initial support for booting from USB drives.
- 3c160dd Introduce helper functions for finding USB end-points.
- 9571439 USB UHCI cleanups.
- a4bd919 Minor - arrange struct drive_s to clarify field roles.
- dac46b1 Fix off by one error in strtcpy.
- d2d1de0 Don't require a valid physical cylinders/heads/spt for logical mapping.
- 76977b2 Move common "command data block" functions to new file blockcmd.c.
- d7e998f Dynamically allocate each drive_g with malloc_fseg().
- 525be69 Add *.pyc to .gitignore.
- 7d70025 Add common "block command" definitions and update cdrom code.
- 68caaa7 Optimize ntohl() code.
- 42157c8 Minor - sort ATA CMD definitions.
- 54671c1 Initial support for USB hubs.
- 7852331 Minor - increase debug level of some USB debug statements.
- ba94a68 Don't leave USB UHCI ports disabled for extended time during reset.
- 49a0aa6 Don't parallelize USB OHCI root port reset.
- cfdc13f Introduce standard warnings for allocation failures and timeouts.
- 8bbc79c Add symbolic definitions for USB delays.
- 991eaff Support USB interrupt schedules on OHCI and UHCI.
- 59c7574 Add some ASSERT32FLAT() to help compiler eliminate dead code.
- e1920be seabios: acpi: fix memory leak in build_srat().
- 84a4d4b Support USB keyboard auto-repeat.
- bf7f1f3 mptable: Pull cpuid_signature/features setting out of loop.
- 6f702dd Rework disabling of ps2 port irqs.
- 2d3f0f5 Go back to using 0xf0000000 for PCI memory start.
- 41c0957 Read APIC version from APIC instead of using a hard-coded value.
- 7a98fd0 Work around bochs floppy issue with wait_irq().
- 4d07902 Add CONFIG_ATA_DMA option; default to off for now.
- 3012af1 Fix PkgLength calculation for the SSDT.
- 92a5742 Add explicit Program Headers to linker scripts.
- 6fc91b2 Prep version for next release.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
5da6833 Update version to 0.5.1
669c991 Fix sign error preventing incorrect memory over 4gig calculation.
7e6bd3e Minor - better indent assembler in int1587.
48cf232 Add comment explaining why mptable is in low memory.
643062f Add int1589 support.
085debd Set FDPT in irq table even for small drives.
7c1b186 Reduce #ifs by weeding out some cross-chunk function definitions.
f9b25d3 Fix vgahook sign issue; add warning to build to catch future cases.
3862b2d vgabios: Fix compile error due to fixed prototypes.
1ca05b0 Be sure to add "void" to all function prototypes that take no args.
b5bb9db mptable: Reset pinmask on new bus or device.
8918989 Detect latest FC12 gcc -combine breakage.
c9d3c2d Minor vga binary cleanups.
9a8609f Make MTRR region 0xc0000-0x100000 be cached.
fdca418 Force a link error if a function is used from the wrong code chunk.
dad41d9 Add __noreturn define for __attribute__((noreturn)).
c003148 Implement native 32bit APM support.
5c99b6c Commit compiled dsdt file; misc comment updates.
29f4b91 prevent acpi from rerouting SCI interrupt
4c94b7e enumerate all PCI buses in mptable
871e0a0 Add support for 32bit PCI BIOS entry.
eda2c83 Only add "addr32" to memory accesses that require them.
52a300f Introduce MODESEGMENT define; rename VISIBLE32 to VISIBLE32FLAT.
fe2c3ee Allocate smbios in temp space and copy into final location.
b164d2c Clear user reserved interrupts (0x60-0x66).
d9104ff Remove pci_bios_bigmem_addr; set pci_bios_mem_addr=0xe0000000
14021f2 Add initial support for ATA DMA.
8362699 Allocate mptable in temp space and copy into final location.
979862e Also report memory over 4G during init.
928d4df provide correct pci routing information in mptable
afc02da Add symbolic definitions for MTRR code.
fb214dc Fix yield() so it works from boot code.
2ceeec9 Fix potential build failure due to text16 section being too large.
a2195e4 Increase version in preparation for next release.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The PC BIOS no longer comes from Bochs.
This patch updates the related entry.
V2 - Modify SeaBIOS description and URL
(Thanks to Gleb Natapov for the hint).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gdt address calculation in linuxboot.bin is broken in two ways: first
it loads %cs into %eax, but that instruction leaves the high bits of %eax
undefined and we did not clear them. Secondly, we completely ignore the
incorrect %eax, and use the undefined %ebx instead.
With these issues fixed, linuxboot works again.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The vpath directive has two advantages over the VPATH variable:
1) it allows to skip searching of .o files; 2) the default semantics
are to append to the vpath, so there is no confusion between "VPATH=xyz"
and "VPATH+=xyz".
Since "vpath %.c %.h PATH" is not valid, I'm introducing a wrapper
macro to append one or more directories to the vpath.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The %gs segment that was used was not matching the comments.
I just moved the GDT descriptor on the stack instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While trying to run -kernel with -bios pc-bios/pcbios.bin, I realized
that I was actually writing data to %es, but only set up %ds to a 32-bit
segment we want to write to.
So at the end of the day the data hasn't actually been copied. Oops.
So here's a fix to set ES instead of DS, which makes -kernel work with
BOCHS bios again (and actually makes the code do the correct thing)!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes the following changes:
42bc394 Make sure to reenable ata interrupts even on error.
494dfc6 Move SeaBIOS post/boot stack to avoid conflict with gPXE.
3133e38 Test for broken gcc -combine on FC12.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the spirit of ff56954baf, fix the
build of linuxboot.S with old as(1) (as found in some BSD base systems)
by emitting the bytes of the insn it doesn't like instead.
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We already have a working multiboot implementation that uses fw_cfg to get
its kernel module etc. data in int19 runtime now.
So what's missing is a working linux boot option rom. While at it I figured it
would be a good idea to take the opcode generator out of pc.c and instead use
a proper option rom, like we do with multiboot.
So here it is - an fw_cfg using option rom for -kernel with linux!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We will have a linux boot option rom soon, so let's take all functionality
that might be useful for both to a header file that both roms can include.
That way we only have to write fw_cfg access code once.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Right now we load the guest kernel to RAM, fire off the BIOS, hope it
doesn't clobber memory and run an option rom that jumps into the kernel.
That breaks with SeaBIOS, as that clears memory. So let's read all
kernel, module etc. data using the fw_cfg interface when in the int19
handler.
This patch implements said mechanism for multiboot.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Rename pxe-eepro100.bin to pxe-i82559er.bin.
The other devices supported by eepro100.c need
additional pxe boot ROM images.
* Call rom_add_option during initialisation.
The code won't work with two or more different
eepro100 devices, because it only adds one option
ROM, but this use case is perhaps never needed.
Using this patch, model=i82559er at least works partially.
For full support, more eepro100 patches are needed
(will follow later, can be fetched from ar7 branch
of QEMU).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
SeaBIOS is a port of pc-bios to GCC. Besides using a more modern tool chain,
SeaBIOS introduces a number of new features including PMM support, better
BEV and BCV support, and better PnP support.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On Wed, Sep 23, 2009 at 10:55:02PM +0200, Juergen Lock wrote:
> On Wed, Sep 23, 2009 at 09:31:16PM +0100, Laurence Tratt wrote:
>[...]
> > then the above error doesn't occur, but
> > pc-bios/optionrom/multiboot.S dies as follows:
> >
> > $
> > AS optionrom/multiboot.o
> > multiboot.S: Assembler messages:
> > multiboot.S:116: Error: `%es:-4(%edi)' is not a valid 16 bit base/index
> > expression
> > $
> >
> > What little Intel assembler I ever knew has long since departed from my
> > brain, so I don't know why that error occurs, nor what a fix might be.
> >
> It occurs because of too old binutils (as(1) in this case), on FreeBSD
> we now have a port for newer ones,
> http://www.freshports.org/devel/binutils
> so I depend on that and have the optionrom Makefile use the new as
> like this: (the first change wrt CFLAGS is unrelated and has probably
> been fixed in the meantime; it caused gmake to complain about
> recursive use of CFLAGS.)
>
> Index: qemu/pc-bios/optionrom/Makefile
> @@ -9,10 +9,13 @@
>
> CFLAGS = -Wall -Wstrict-prototypes -Werror -fomit-frame-pointer -fno-builtin
> CFLAGS += -I$(SRC_PATH)
> -CFLAGS += $(call cc-option, $(CFLAGS), -fno-stack-protector,"")
> +CFLAGS := $(CFLAGS) $(call cc-option, $(CFLAGS), -fno-stack-protector,"")
>
> build-all: multiboot.bin
>
> +%.o: %.S
> + $(CC) -E $(CFLAGS) -o - -c $< |${LOCALBASE}/bin/as -V -Qy -o $@
> +
> %.img: %.o
> $(call quiet-command,$(LD) -Ttext 0 -e _start -s -o $@ $<," Building $(TARGET_DIR)$@")
>
That patch didn't seem to help on OpenBSD so I now finally got around
making another one that just emits the bytes of the offending insn
instead so people can keep using old assemblers:
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cc-option uses more make-syntax to replace the shell "if/else".
Issue with recursive += is fixed by doing the first assignment
simply-expanded, as explained in
http://www.gnu.org/software/make/manual/html_node/Appending.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With cc-option we are testing if gcc just accept a particular option, we don't need CFLAGS at all. And this fixes the recursive problem with CFLAGS
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we have to variables: QEMU_CFLAGS: flags without which we can't compile
CFLAGS: "-g -O2"
We can now run:
make CFLAGS="-fbar" foo.o
make CFLAGS="" foo.o
make CFLAGS="-O3" foo.o
And it all should work.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
The printf command takes an octal value after \, so we have to convert
our decimal representation to octal first and then write it.
This unbreaks extboot signing. Multiboot wasn't affected yet because
the checksum was < 8.
Spotted and first patch by Glauber Costa <glommer@redhat.com>.
Printf idea by Paolo Bonzini <bonzini@gnu.org>.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Glauber Costa <glommer@redhat.com>
CC: Paolo Bonzini <bonzini@gnu.org>
CC: Jan Ondrej <ondrejj@salstar.sk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Attached patch makes signrom.sh working on NetBSD.
The output of the 'od' command leads to a syntax error
which breaks the build.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We're marking the used entry bitmap in smbios_load_external() for each
type we check, regardless of whether we loaded anything. This makes
subsequent calls behave as if we've already loaded the tables from qemu
and can result in missing tables (ex. multiple type4 entries on an SMP
guest). Only mark the bitmap if we actually load something.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to not execute code we just compiled, let's replace signrom
with a shell script that does the same thing while staying compatible
to pretty much every system available.
This should make cross-compilation for windows easier.
aliguori: fix build when objdir != srcdir
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For Sparc64, this fixes the PCI bridge configuration bugs revealed by the
improved bridge handling (b7ee1603c1).
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In order to build the multiboot option rom, we need a Makefile and a tool
to sign the rom with.
Both are provided by this patch and mostly taken from the extboot source,
written by Anthony Liguori.
Once built, the resulting binary gets copied to pc-bios automatically.
Building also occurs automatically when on an x86 host.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch implements support for Multiboot on x86 for -kernel.
Multiboot is a "new" approach to get rid of different bootloaders, providing
a unified interface for the kernel. It supports command line options and
kernel modules.
The two probably best known projects using multiboot are Xen and GNU Hurd.
This implementation should be mostly feature-complete. It is missing VBE
extensions, but as no system uses them currently it does not really hurt.
To use multiboot, specify the kernel as -kernel option. Modules should be given
as -initrd options, seperated by a comma (,). -append also works.
Please bear in mind that grub also does gzip decompression, which qemu does
not do yet. To run existing images, please ungzip them first.
The guest multiboot loader code is implemented as option rom using int 19.
Parts of the work are based on efforts by Rene Rebe, who originally ported
my code to int 19.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This isn't the most ideal layout, but it makes -L /path/to/git/pc-bios Just
Work which is very convenient.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Bit 0 is the enable bit, which we not only don't want to set, but
it will stick and make us think it's an I/O port resource.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
uses the QEMU firmware configuration interfacce to send the NUMA
topology to the BIOS, which has to setup the tables. Only one firmware
configuration channel is used.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7212 c046a42c-6fe2-441c-8c8c-71466251a162
Create a new -smbios option (x86-only) to allow binary SMBIOS entries
to be passed through to the BIOS or modify the default values of
individual fields of type 0 and 1 entries on the command line.
Binary SMBIOS entries can be generated as follows:
dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | \
perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin
These can then be passed to the BIOS using this switch:
-smbios file=smbios_type_1.bin
Command line generation supports the following syntax:
-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
[,uuid=$(uuidgen)][,sku=str][,family=str]
For instance, to add a serial number to the type 1 table:
-smbios type=1,serial=0123456789
Interface is extensible to support more fields/tables as needed.
aliguori: remove texi formatting from help output
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7163 c046a42c-6fe2-441c-8c8c-71466251a162
From the documentation I can find, this register is supposed to be read-only.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7070 c046a42c-6fe2-441c-8c8c-71466251a162
Use firmware configuration device for boot device, kernel, initrd and
kernel command line parameters on PPC, Sparc32 and Sparc64.
Update OpenBIOS images to r479 which supports the change.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6777 c046a42c-6fe2-441c-8c8c-71466251a162
mpc8544ds.dts is copied from kerenl.
Non-supported devices has been removed.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6664 c046a42c-6fe2-441c-8c8c-71466251a162
This is needed to dynamically add SLIC tables with Windows
activation keys.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6650 c046a42c-6fe2-441c-8c8c-71466251a162
A number of patches were merged since we last pulled.
Thanks to Marcelo Tosatti for rebasing the existing patches and testing.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6589 c046a42c-6fe2-441c-8c8c-71466251a162
The VNC protocol contains quite some constants, some of which are
currently hardcoded in the vnc.c code. This is not exactly pretty.
Let's move all those constants out to vnc.h, so they are clearly
separated. While at it, I also included other defines that will be
used later in this patch series.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6493 c046a42c-6fe2-441c-8c8c-71466251a162
See each patch for individual Signed-off-by's/commit logs
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6392 c046a42c-6fe2-441c-8c8c-71466251a162
They have applied all of our patches and they have an additional HPET fix.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6289 c046a42c-6fe2-441c-8c8c-71466251a162
A number of our patches have been merged so we can now remove them from our
queue.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6117 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori: did a little indenting and motion for aesthics.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6109 c046a42c-6fe2-441c-8c8c-71466251a162
Apparently, guests are very tolerant of corrupt ACPI tables because our
tables have been badly corrupted for some time now. A version of
Knoppix using a 2.6.11 kernel refused to boot and it turned out it was
due to the interrupt override table introduced by the recent HPET
commit.
This patch updates the BIOS and introduces a patch to pack the ACPI
tables. If you have a guest that used to work and is broken by the this
commit, let me know. We have some weird hacks in the tables that I
suspect are work arounds for this bug.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6108 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds HPET emulation. It can be disabled with -disable-hpet. An hpet
provides a more finely granular clocksource than otherwise available on PC.
This means that latency-dependent applications (e.g. multimedia) will generally
be smoother when using the HPET.
Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6081 c046a42c-6fe2-441c-8c8c-71466251a162
Now built from the kernel.org git tree.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6079 c046a42c-6fe2-441c-8c8c-71466251a162
mirror is updated more regularly and reliably.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6078 c046a42c-6fe2-441c-8c8c-71466251a162
Update the PC BIOS to the latest version, split out the patches into
patch series, and update the README to point to the new location of the
Bochs BIOS source tree.
Also update the gitignore to allow the patch queue directory to be used.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6077 c046a42c-6fe2-441c-8c8c-71466251a162
Since most IO devices are integrated into the 440EP chip, "Bamboo support"
mostly entails implementing the -kernel, -initrd, and -append options.
These options are implemented by loading the guest as if u-boot had done it,
i.e. loading a flat device tree, updating it to hold initrd addresses, ram
size, and command line, and passing the FDT address in r3.
Since we use it with KVM, we enable the virtio block driver and include hooks
necessary for KVM support.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6067 c046a42c-6fe2-441c-8c8c-71466251a162
Changes:
r219: Fix #size-cells for HelenOS, add /openprom/version node
r220: Fix typo
r221: More realistic mmu_translate
r222: Fix device names to allow Net/OpenBSD to boot
r223: add set-callback for Aurora 2.0
r224: Switch keyboard controller to translated mode so it works as expected
r225: Add mmu release (claim added in r219)
r226: Set variable defaults before nvram_init also for Sparc64 (cf. r136)
r227: Use nvram boot-args and boot-device variables also for Sparc64 (cf. r137)
r228: Fix compilation on OpenBSD: avoid accidental system include file use
r229: Rename /packages/client-iface to /openprom/client-services
r230
From Igor V. Kovalenko:
This openbios-grubfs-ext2fs-block.patch fixes a problem where inode
pointer is truncated to 32bit integer and then sign-extended to 64bit
integer while passing second pointer argument to ext2_rdfsb.
r231: Fix pad alignment
r232: Remove package finding code that finds unrelated packages
r233: Fix virtual to physical address translation (Igor Kovalenko)
r234: Implement itlb/dtlb directed writes (Igor Kovalenko)
r235: Fix warnings that would be caused by ld flag --warn-common
r236: Enable ld flag --warn-common
r237: Use the firmware device introduced in Qemu SVN r5256
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5262 c046a42c-6fe2-441c-8c8c-71466251a162
r186: Revert broken r161, fix identification string printing (Igor Kovalenko)
r187: Fix NetBSD reset problem
r188: Add a TODO for Sparc
r189: Fix some Sparc32 compile warnings
r190: Fix some Sparc64 compile warnings
r191: Add prototypes for [v]snprintf
r192: Add a common header file for libgcc functions
r193: Implement obmem for NetBSD loader
r194: Add Make dependencies for some files, unify Sparc32/64 build.xml files
r195: Remove debug messages
r196: Add a.out support for SILO
r198: Add a CPU node
r199: Add (bogus) memory nodes
r200: Add idprom node
r201: Make serial console usable
r202: Add MMU node and ops
r203: Add trap table setting function to client interface
r204: Fix MMU translation
r205: Handle 32 bit windows, remove now unused files
r206: Support for simple boot device selection
r207: Fix TLB entry generation
r208: Fix printing of exception messages
r209: Set up tick_cmpr, update assembly flags
r210: Add a clock-frequency node
r211:
Fix available and total memory
Implement a static list of mmu translations
Map more pages
Add a fake unmap method
r212: Fix builtin.c dependencies
r213: Add FCode boot loader for Solaris etc.
r214: Add correct reset vectors
r215: Add T1 and T2 CPUs
r216: Fix wrong translations
r217: Add bootargs property for kernel command line
r218:
Finally fix the very obscure problem which prevented normal and especially
FCode boot: too small heap (used for Forth memory)!
Remove forced arch_init and boot hacks
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4983 c046a42c-6fe2-441c-8c8c-71466251a162
r182: Add handlers for timer interrupts
r183: Print a message and halt if Sun4c or Sun4d
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3875 c046a42c-6fe2-441c-8c8c-71466251a162
r177:
Reset fixes:
* recalculate CRC to avoid error message and halt after reset
* fix bug that crashed SS10/SMP when reset
r178: Remove unused variable
r179: Improved Module ID generation
r180: Add support for eccmemctl
r181: Add support for SPARCstation 20 machine type
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3804 c046a42c-6fe2-441c-8c8c-71466251a162
r172: Enable boot mode in the exception handler for both SuperSparc and TurboSparc
r173: More CPU definitions
r174: Add Sparc64 CPU identification
r175: Add SPARCserver 600MP emulation
r176: Update OHW interface to version 3.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3649 c046a42c-6fe2-441c-8c8c-71466251a162
r150: Try to fix system reset for SMP and SS-10 cases
r151: Fix obp_dumb_memalloc
r152: Fix mapping more than 2G memory
r153: Get a real memory allocator for Sparc, based on PPC ofmem
r154: Update totavail when memory is allocated by dumb memory allocator
r155: Fix pop_fstr_copy memory leaks
- console one prevented Debian 3.1r1 from installing in console=prom mode
- fixing this also needed the real malloc/free
r156: Hack for building on CIFS directory
r157: Allow boot start PC to be different from virtual location (boot mode)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3029 c046a42c-6fe2-441c-8c8c-71466251a162
r145: Fix power-management location for SS-10
r146: Fix overallocation
r147: NetBSD and OpenBSD fixes:
- Correct timer and interrupt controller mappings
- Add ESP clock frequency to avoid division by zero
- CS4231 exists only in SS5
- Disable BPP for now, it's not emulated by Qemu anyway
With these fixes, one NetBSD kernel even got to root device prompt on SS5.
r148: Update vsprintf.c from Linux to get 64-bit output
r149: Use full 36-bit physical address space on SS10
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2831 c046a42c-6fe2-441c-8c8c-71466251a162
