According to PPC440 user manual, PPC 440 supports ``mftb'' even it's a
preserved instruction:
PPC440_UM2013.pdf, p.445, table A-3
when I compile a kernel (2.6.30, bamboo_defconfig/440EP &
canyonlands/460EX), I can see ``mftb'' by using ppc-xxx-objdump
vmlinux
I have also checked the ppc 440x[456], 460S, 464, they also should support mftb.
The following patch enable mftb for all ppc 440 variants, including:
440EP, 440GP, 440x4, 440x5 and 460
Signed-off-by: Baojun Wang <wangbj@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Access to the PVR SPR is normally forbidden from userspace apps. The
Linux kernel, however, fixes up reads in the appropriate trap handler.
To permit applications that read PVR to run on QEMU, then, we need to
implement the same handling of PVR reads.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Do this so other pieces of code can make decisions based on the
capabilities of the CPU we're emulating.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
According to 604eUM_book (see 8.3.3 Reset inputs p8-54), the IP bit is set
for hreset and the vector is at offset 0x100 from the exception prefix.
No difference in this area between 604 and 604e.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Altivec and SPE both have 34 registers in their register sets, not 35
with a missing register 32.
GDB would ask for register 32 of the Altivec (resp. SPE) registers and
the code would claim it had zero width. The QEMU GDB stub code would
then return an E14 to GDB, which would complain about not being sure
whether p packets were supported or not.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6769 c046a42c-6fe2-441c-8c8c-71466251a162
Real 970 CPUs have the SLB not memory backed, but inside the CPU.
This breaks bridge mode for 970 for now, but at least keeps us from
overwriting physical addresses 0x0 - 0x300, rendering our interrupt
handlers useless.
I put in a stub for bridge mode operation that could be enabled
easily, but for now it's safer to leave that off I guess (970fx doesn't
have bridge mode AFAIK).
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6757 c046a42c-6fe2-441c-8c8c-71466251a162
Linux tries to access some SPRs on PPC64 boot. Let's just ignore those
for the 970fx for now to make it happy.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6751 c046a42c-6fe2-441c-8c8c-71466251a162
- use ctz32 instead of ffs - 1
- small optimisation of mtcrf
- add the name of both opcodes
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6669 c046a42c-6fe2-441c-8c8c-71466251a162
A real 970 CPU starts up with HIOR=0xfff00000 and triggers a reset
exception, basically ending up at IP 0xfff001000.
Later on this HIOR has to be set to 0 by the firmware in order to
enable the OS to handle interrupts on its own.
This patch maps HIOR to exec_prefix, which does the same thing
internally in qemu already.
It replaces the previous patch that changed the 970 initialization
constants, as this is the clean solution to the same problem.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6656 c046a42c-6fe2-441c-8c8c-71466251a162
The e500v1 chips only have single-precision floating point; don't say we
support the double-precision floating-point instructions on such chips.
Also add an e500v1 -cpu argument for a generic e500v1.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6576 c046a42c-6fe2-441c-8c8c-71466251a162
Single-precision and double-precision floating-point instructions should
be separated into their own categories, since some chips only support
single-precision instructions.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6575 c046a42c-6fe2-441c-8c8c-71466251a162
Don't read/write SPEFSCR until we figure out what to do about exceptions.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6425 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
Change from v1:
Avoid changing the existing coding style in certain files.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6120 c046a42c-6fe2-441c-8c8c-71466251a162
when compiling on NetBSD:
warning: array subscript has type 'char'
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5727 c046a42c-6fe2-441c-8c8c-71466251a162
Define XER bits as a single register and access them individually to
avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit
registers).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162
tend more to propagate bugged definition than simplify the code.
Check and fix PowerPC 6xx implementations definitions.
Misc fixes in PowerPC CPU list.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3707 c046a42c-6fe2-441c-8c8c-71466251a162
Use it to properly initialize the clock for the PreP target.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3701 c046a42c-6fe2-441c-8c8c-71466251a162
ie MPC5xx, MPC8xx, e200, e300, e500 and e600 cores.
Make those CPUs and PowerPC 440 available for user-mode emulation,
thus providing a way of testing their implementation specific instructions.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3681 c046a42c-6fe2-441c-8c8c-71466251a162
in order to implement Freescale cores.
Fix efsadd / efssub opcodes.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3679 c046a42c-6fe2-441c-8c8c-71466251a162
Always make the hypervisor timers available.
Remove all TARGET_PPC64H checks, keeping a few if (0) tests for cases
that cannot be properly handled with the current PowerPC CPU definition.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3656 c046a42c-6fe2-441c-8c8c-71466251a162
Implement PowerPC 601 HID0 register, needed for little-endian mode support.
As a consequence, we need to merge hflags coming from MSR with other ones.
Use little-endian mode from hflags instead of MSR during code translation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3524 c046a42c-6fe2-441c-8c8c-71466251a162
