The vector interrupt has higher priority than interrupt_level_n.
Also check only interrupt_level_n concurency when TL > 0, the traps of
other types may be nested.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't produce stray irq 5, don't overwrite ivec_data if still busy with
processing of the previous interrupt.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A strong limitation of QOM right now is that unconverted ports
(e.g. all...) do not give a canonical path to devices that are
part of the board. This in turn makes it impossible to replace
PROP_PTR with a QOM link for example.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We want the composition tree to to be in order by the time we call
qdev_init, so that a single set of the toplevel realize property can
propagate all the way down the composition tree.
This is not the case so far. Unfortunately, this is incompatible
with calling qdev_init in the constructor wrappers for devices,
so for now we need to unattach some devices that are created through
those wrappers. This will be fixed by removing qdev_init and instead
setting the toplevel realize property after machine init.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is QOM "mkdir -p". It is useful when referring to
container objects such as "/machine".
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We never actually clear the TEMT (transmit sending register empty) flag when
populating the TSR. We set the flag, but since it's never cleared, setting it
is sort of pointless..
I found this with a unit test case.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I'm not sure if the retry logic has ever worked when not using FIFO mode. I
found this while writing a test case although code inspection confirms it is
definitely broken.
The TSR retry logic will never actually happen because it is guarded by an
'if (s->tsr_rety > 0)' but this is the only place that can ever make the
variable greater than zero. That effectively makes the retry logic an 'if (0)'.
I believe this is a typo and the intention was >= 0. Once this is fixed though,
I see double transmits with my test case. This is because in the non FIFO
case, serial_xmit may get invoked while LSR.THRE is still high because the
character was processed but the retransmit timer was still active.
We can handle this by simply checking for LSR.THRE and returning early. It's
possible that the FIFO paths also need some attention.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This bug existed since the first commit. Fortunately, the affected
registers have no functionality in qemu. This will only prevent the
following warning:
milkymist_vgafb: write access to unknown register 0x00000034
Signed-off-by: Michael Walle <michael@walle.cc>
The new version introduces the following new registers:
- SoC clock frequency: read-only of system clock used on the SoC
- debug scratchpad: 8 bit scratchpad register
- debug write lock: write once register, without any function on QEMU
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since /i440fx/piix3 is being removed from the composition tree, the
IO-APIC is placed under /i440fx. This is wrong and should be changed
as soon as the /i440fx/piix3 path is put back.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This lets the user specify the desired semantics. By default, the RTC
will follow adjustments from the host's NTP client, and will remain in
sync when the virtual machine is stopped. The previous behavior, which
provides determinism with both icount and qtest, remains available with
"-rtc clock=vm".
pl031 supports migration, so we need to convert the time base from
rtc_clock to vm_clock and back for backwards compatibility. (The
rtc_clock may not be synchronized on the two machines, especially with
savevm/loadvm, so the conversion is needed anyway. And since any time
base will do, why not pick the one base that is backwards compatible).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This lets the user specify the desired semantics. By default, the RTC
will follow adjustments from the host's NTP client. "-rtc clock=vm" will
improve determinism with both icount and qtest. Finally, the previous
behavior is available with "-rtc clock=rt".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The output of the pulse generator needs to be deterministic when
running in -icount mode, and to remain constant whenever the VM is
stopped. So the right clock to use is vm_clock.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* sstabellini/disk_io:
xen_disk: when using AIO flush after the operation is completed
xen_disk: open disk with BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NATIVE_AIO
We need to detach the blkdev from the BlockDriverState before calling
bdrv_delete.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The first console has a different location compared to other PV devices
(console, rather than device/console/0) and doesn't obey the xenstore
state protocol. We already special case the first console in con_init
and con_initialise, we should also do it in con_disconnect.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Commit 45efb16124 optimized a bit too
much. We can skip the vga_invalidate_display() in case no console
switch happened because we don't need a full redraw then. We can *not*
skip vga_hw_update() though, because the screen content will be stale
then in case nobody else calls vga_hw_update().
Trigger: vga textmode with vnc display and no client connected.
Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Tested-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* sstabellini/saverestore-8:
xen: do not allocate RAM during INMIGRATE runstate
xen mapcache: check if memory region has moved.
xen: record physmap changes to xenstore
Set runstate to INMIGRATE earlier
Introduce "xen-save-devices-state"
cirrus_vga: do not reset videoram
Conflicts:
qapi-schema.json
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
qemu-ga: for w32, fix leaked handle ov.hEvent in ga_channel_write()
ioapic: fix build with DEBUG_IOAPIC
.gitignore: add qemu-bridge-helper and option rom build products
cleanup obsolete typedef
monitor: Remove unused bool field 'qapi' in mon_cmd_t struct
ds1338: Add missing break statement
vnc: Fix packed boolean struct members
Remove type field in ModuleEntry as it's not used
* bonzini/scsi-next:
scsi: add get_dev_path
virtio-scsi: call unregister_savevm properly
scsi: copy serial number into VPD page 0x83
scsi-cd: check ready condition before processing several commands
get rid of CONFIG_VIRTIO_SCSI
Currently QEMU passes the qdev device id to the guest in an ASCII-string
designator in page 0x83. While this is fine, it does not match what
real hardware does; usually the ASCII-string designator there hosts
another copy of the serial number (there can be other designators,
for example with a world-wide name). Do the same for QEMU SCSI
disks.
ATAPI does not support VPD pages, so it does not matter there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit is more or less obvious. What it caused is less obvious:
SCSI CD drives failed to eject under Linux, though for example the
"change" command worked okay. This happens because of the autoclose
option in the Linux CD-ROM driver.
The actual chain of events is quite complex and somehow involves
udev helpers; the actual command that matters is READ TOC, though
honestly it's not really clear to me how because it should always be
invoked after autoclose, not before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-kvm/memory/urgent: (42 commits)
memory: check for watchpoints when getting code ram_addr
exec: fix write tlb entry misused as iotlb
Sparc: avoid AREG0 wrappers for memory access helpers
Sparc: avoid AREG0 for memory access helpers
TCG: add 5 arg helpers to def-helper.h
softmmu templates: optionally pass CPUState to memory access functions
i386: Remove REGPARM
sparc64: implement PCI and ISA irqs
sparc: reset CPU state on reset
apb: use normal PCI device header for PBM device
w64: Fix data type of next_tb and tcg_qemu_tb_exec
softfloat: fix for C99
vmstate: fix varrays with uint32_t indexes
Fix large memory chunks allocation with tcg_malloc.
hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region
hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state
hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state
ARM: Remove unnecessary subpage workarounds
malta: Fix display for LED array
malta: Use symbolic hardware addresses
...
Fix compilation failures on 32 bit hosts (cast from pointer to
integer of different size; %ld expects 'long int' not uint64_t).
Reported-by: Steve Langasek <steve.langasek@canonical.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
dprint is still used for qxl_init_common one time prints.
also switched parts of spice-display.c over, mainly all the callbacks to
spice server.
All qxl device trace events start with the qxl device id.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If pipe creation fails, exit, don't log and continue. Fix indentation at
the same time.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ioapic.c:198: error: format ‘%08x’ expects type ‘unsigned int’, but argument 3 has type ‘uint64_t’
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Without the break statement, case 5 sets month and year from the same
data. This does not look correct.
The missing break was reported by splint.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Generate correct trap for external interrupts. Map PCI and ISA IRQs to
RIC/UltraSPARC-IIi interrupt vectors.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region
hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state
hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state
ARM: Remove unnecessary subpage workarounds
hw/omap_i2c: Convert to qdev
* 'malta' of git://qemu.weilnetz.de/qemu:
malta: Fix display for LED array
malta: Use symbolic hardware addresses
malta: Always allocate flash memory
malta: Clean allocation of bios region alias
The qdev property release function frees any string properties. This was
resulting in a double free during hot unplug.
It manifests in network devices because block devices have a NULL romfile
property by default.
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The pxa2xx I2C controller can have its registers at an arbitrary offset
within the MemoryRegion it creates. We use this to create two controllers,
one which covers a region of size 0x10000 with registers starting at an
offset 0x1600 into that region, and a second one which covers a region
of size just 0x100 with the registers starting at the base of the region.
The implementation of this offsetting uses two qdev properties, "offset"
(which sets the offset which must be subtracted from the address to
get the offset into the actual register bank) and "size", which is the
size of the MemoryRegion. We were actually using "offset" for two
purposes: firstly the required one of handling the registers not being
at the base of the MemoryRegion, and secondly as a workaround for a
deficiency of QEMU. Until commit 5312bd8b3, if a MemoryRegion was mapped
at a non-page boundary, the address passed into the read and write
functions would be the offset from the start of the page, not the
offset from the start of the MemoryRegion. So when calculating the value
to set the "offset" qdev property we included a rounding to a page
boundary.
Following commit 5312bd8b3 MemoryRegion read/write functions are now
correctly passed the offset from the base of the region, and our
workaround now means we're subtracting too much from addresses, resulting
in warnings like "pxa2xx_i2c_read: Bad register 0xffffff90".
The fix for this is simply to remove the rounding to a page boundary;
this allows us to slightly simplify the expression since
base - (base & (~region_size)) == base & region_size
The qdev property "offset" itself must remain because it is still
performing its primary job of handling register banks not being at
the base of the MemoryRegion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pxa2xx LCD controller is intended to work with 32-bit bus and it has no knowledge
of system's physical address size, so it should not use target_phys_addr_t in it's
state. Convert three variables in DMAChannel state from target_phys_addr_t to uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do this safely because:
1) pxa2xx has 32-bit physical address;
2) rest of the code in file never assumes converted variables to have any size
different from uint32_t;
3) we shouldn't have used VMSTATE_UINTTL in the first place because this macro
is for target_ulong type (which can be different from target_phys_addr_t).
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pxa2xx DMA controller is a 32-bit device and it has no knowledge of system's
physical address size, so it should not use target_phys_addr_t in it's state.
Convert variables descr, src and dest from type target_phys_addr_t to uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do this safely because:
1) pxa2xx actually has 32-bit physical address size;
2) rest of the code in file never assumes descr, src and dest variables to have
size different from uint32_t;
3) we shouldn't have used VMSTATE_UINTTL in the first place because this macro
is for target_ulong type (which can be different from target_phys_addr_t).
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the ARM per-CPU peripherals (GIC, private timers, SCU, etc),
remove workarounds for subpage memory region read/write functions
being passed offsets from the start of the page rather than the
start of the region. Following commit 5312bd8b3 the masking off
of high bits of the address offset is now harmless but unnecessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
According the spec, the card works in network/host communication mode only when
both EEM1 and EEM0 are unset in 93C46 Command Register (normal op
mode). So this patch check these bits before trying to receive packets.
As some guest driver (such as linux, see cp_init_hw() in 8139cp.c)
allocate rx ring after the recevier were enabled, this would cause our
emulation codes tries to dma into guest memory when the rx descriptor
is not properly configured. This patch fixes this.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the spec, only when opmode is "Config. Register Write
Enable" could driver write to CONFIG0,1,3,4 and bits 13,12,8 of BMCR.
Currently, we allow modifying to those registers also when 8139 is in
"Auto-load" mode and "93C46 (93C56) Programming" mode. This patch
fixes this.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some drivers (such as win7) use byte read for TxStatus registers, so we need to
support this to let guest driver behave correctly.
For writing, only double-word access is allowed by spec.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The tx buffer would be re-allocated for tx descriptor with big size
and without LS bit set, this would make guest driver could easily let
qemu to allocate unlimited.
In linux host, a glib failure were easy to be triggered:
GLib-ERROR **: gmem.c:176: failed to allocate 18446744071562067968 bytes
This patch fix this by adding a limit. As the spec didn't tell the maximum size
of buffer allowed, stick it to current CP_TX_BUFFER_SIZE (65536).
Changes from V1:
Drop the while statement and s->cplus_txbuffer check.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit 5caef97a16010f818ea8b950e2ee24ba876643ad introduced
a regression: we do not make IO base/limit upper 16
bit registers writeable, so we should report a 16 bit
IO range type, not a 32 bit one.
Note that PCI_PREF_RANGE_TYPE_32 is 0x0, but PCI_IO_RANGE_TYPE_32 is 0x1.
In particular, this broke sparc64.
Note: this just reverts to behaviour prior to the commit above.
Making PCI_IO_BASE_UPPER16 and PCI_IO_LIMIT_UPPER16
registers writeable should, and seems to, work just as well, but
as no system seems to actually be interested in 32 bit IO,
let's not make unnecessary changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As we make upper bits in IO and prefetcheable memory
registers writeable, we should declare support
for 64 bit prefetcheable memory and 32 bit io
in the bridge.
This changes the default for apb, dec, but I'm guessing
they got the defaults wrong by accident.
Alternatively, we could let bridges declare lack of
64 bit support and make the upper bits read-only zero.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for a standard pci to pci bridge,
enabling support for more than 32 PCI devices in the system.
Device hotplug is supported by means of SHPC controller.
For guests with an SHPC driver, this allows robust hotplug
and even hotplug of nested bridges, up to 31 devices
per bridge.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This capability makes it possible for the guest to
report a unique chassis identifier to the user.
The spec also recommends making chassis indentifier
persist in eeprom.
This isn't implemented.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for SHPC interface, as defined by PCI Standard
Hot-Plug Controller and Subsystem Specification, Rev 1.0
http://www.pcisig.com/specifications/conventional/pci_hot_plug/SHPC_10
Only SHPC intergrated with a PCI-to-PCI bridge is supported,
SHPC integrated with a host bridge would need more work.
All main SHPC features are supported:
- MRL sensor
- Attention button
- Attention indicator
- Power indicator
Wake on hotplug and serr generation are stubbed out but unused
as we don't have interfaces to generate these events ATM.
One issue that isn't completely resolved is that qemu currently
expects an "eject" interface, which SHPC does not provide: it merely
removes the power to device and it's up to the user to remove the device
from slot. This patch works around that by ejecting the device
when power is removed and power LED goes off.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 8-LED array was already implemented in the first commit to Malta,
but this implementation was incomplete.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The patch adds definitions of some hardware addresses and uses these
definitions.
It also replaces the type of all addresses from signed to unsigned values.
This is only a cosmetic change because addresses are unsigned values,
the functions called also expect unsigned values,
and we need no sign extension here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
There is no reason why there should not be a flash memory when the
Malta emulation is started with a Linux kernel. When flash memory
is always available, the code is simpler, and it can be better tested.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Convert the omap_i2c device to qdev.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For a pci bridge device, if we don't override
the name with custom code, the bus will be addressed as
<id>.0, where id is the id specified by the user.
Since PCI Bridge devices have a single bus each, we don't need
the index: address the bus using the parent device name.
This is better since this way users don't care about
our internal bus/device distinctions.
As far as I could see, we only have built-in
bridges at this point which always override the
name. So this change will only affect ioh3420.c.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Value check in PCI Express Base Specification rev 1.1
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Actually, pci_parse_devaddr checks if the dom/bus of the PCI address exist. But
this should be the jobs of a caller. In fact, the two callers of this function
will try to retrieve the PCIBus related to the devaddr and return an error if
they cannot.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After commit 5312bd8b31 we got memory region relative offsets into our mmio
callbacks instead of page boundary based offsets.
This broke the OpenPIC emulation which expected offsets to be on page boundary
and substracted its region offset manually.
This patch gets rid of that manual substraction and lets the memory api do its
magic instead.
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, the function spapr_create_phb() uses its parameters to
initialize the correct memory windows for the new PCI Host Bridge
(PHB). This is not the way things are supposed to be done with qdevs,
and means you can't create extra PHBs easily using -device.
Since pSeries machines can and do have many PHBs with various
configurations, this is a real limitation, not just a theoretical.
This patch, therefore, alters the PHB initialization code to use qdev
properties to set these parameters of the new bridge, moving most of
the code from spapr_create_phb() to spapr_phb_init().
While we're at it, we change the naming of each PCI bus and its
associated memory regions to be less arbitrary and make it easier to
relate the guest and qemu views of memory to each other.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The pseries "xics" interrupt controller, like most interrupt
controllers can support both message (i.e. edge sensitive) interrupts
and level sensitive interrupts, but it needs to know which are which.
When I implemented the xics emulation for qemu, the only devices we
supported were the PAPR virtual IO devices. These devices only use
message interrupts, so they were the only ones I implemented in xics.
Since then, however, we have added support for PCI devices, which use
level sensitive interrupts. It turns out the message interrupt logic
still actually works most of the time for these, but there are
circumstances where we can lost interrupts due to the incorrect
interrupt logic.
This patch, therefore, implements the correct xics level-sensitive
interrupt logic. The type of the interrupt is set when a device
allocates a new xics interrupt.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The sPAPR PCI code defines a PCI device "spapr-pci-host-bridge-pci" which
is never used. This came over from the earlier bridge driver we used as
a template. Some other bridges appear on their own PCI bus as a device,
but that is not true of pSeries bridges, which are pure host to PCI with
no visible presence on the PCI side.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The 'bars' constant array was used in experimental device allocation code
which is no longer necessary now that we always run the SLOF firmware.
This patch removes the now redundant variable.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
spin_rw_ops is only used in hw/ppce500_spin.c.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
When trying to run a ppc405 guest, it segfaults quite quickly, trying to
access timers that weren't initialized. Initialize them properly instead.
Reported-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Scripted conversion:
for file in hw/xtensa_*.[hc]; do
sed -i "s/CPUState/CPUXtensaState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/sun4m.c hw/sun4u.c hw/grlib.h hw/leon3.c; do
sed -i "s/CPUState/CPUSPARCState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/sh.h hw/shix.c hw/r2d.c; do
sed -i "s/CPUState/CPUSH4State/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/s390-*.[hc]; do
sed -i "s/CPUState/CPUS390XState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/ppc*.[hc] hw/mpc8544_guts.c hw/spapr*.[hc] hw/virtex_ml507.c hw/xics.c; do
sed -i "s/CPUState/CPUPPCState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/mips_*.[hc]; do
sed -i "s/CPUState/CPUMIPSState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/microblaze_*.[hc] hw/petalogix_ml605_mmu.c hw/petalogix_s3adsp1800_mmu.c; do
sed -i "s/CPUState/CPUMBState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/an5206.c hw/dummy_m68k.c hw/mcf.h hw/mcf5206.c hw/mcf5208.c hw/mcf_intc.c; do
sed -i "s/CPUState/CPUM68KState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/lm32_boards.c hw/milkymist.c; do
sed -i "s/CPUState/CPULM32State/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/apic.h hw/kvm/apic.c hw/kvmvapic.c hw/pc.c hw/vmport.c hw/xen_machine_pv.c; do
sed -i "s/CPUState/CPUX86State/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/cris-boot.[hc] hw/cris_pic_cpu.c hw/axis_dev88.c hw/etraxfs.h hw/etraxfs_ser.c; do
sed -i "s/CPUState/CPUCRISState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in hw/alpha_*.[hc]; do
sed -i "s/CPUState/CPUAlphaState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
pc.h and apic.h are not needed; apic.h would drag in x86 CPUState and
is now included directly for TARGET_I386.
isa.h is already #included from mc146818rtc.h.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
On ppc405ep there is a register that allows for software to reset the
core, but not the whole system. Implement this reset using a reset
interrupt.
This gets rid of a bunch of #if 0'ed code.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The kvmvapic code remaps a section of ROM as RAM to allow the guest to
maintain state there. It is careful to align the section size to a page
boundary, to avoid creating subpages, but neglects to do the same for
the start address. These leads to an assert later on when the memory
core tries to create a page which is half RAM and half ROM.
Fix by aligning the start address to a page boundary.
This can be triggered by running qemu-system-x86_64 -enable-kvm -vga none.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/usb.44:
Endian fix an assertion in usb-msd
uhci: alloc can't fail, drop check.
uhci: new uhci_handle_td return code for tds still in flight
uhci: renumber uhci_handle_td return codes
uhci: use enum for uhci_handle_td return codes
uhci: tracing support
uhci: cancel on schedule stop.
uhci: fix uhci_async_cancel_all
uhci: pass addr to uhci_async_alloc
usb: improve packet state sanity checks
usb-ohci: DMA writeback bug fixes
usb-ehci: drop unused isoch_pause variable
usb: zap hw/ush-{ohic,uhci}.h + init wrappers
usb: the big rename
Currently, the "kvmclock" type is only registered when kvm_enabled().
This breaks when moving type registration to before command line
parsing (so that QOM types can be used for CPU and machine).
Since the QOM classes are lazy-initialized anyway and kvmclock_create()
has another kvm_enabled() check, simply drop the KVM check in
kvmclock_register_types().
kvm-i8259, kvm-apic and kvm-ioapic do not suffer from such a check.
Reviewed-by: please.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no need to set the videoram to 0xff in cirrus_reset, because it
is the BIOS' job.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Avi Kivity <avi@redhat.com>
This fixes a broken endian assumption in an assertion in usb-msd.
Cc: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Step #2 (separate for better bisectability): renumber so the silly '-1'
goes away. Pick a range which doesn't overlap the old values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new function to check whenever the packet state is as expected,
log more informations in case it isn't.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes two bugs in the OHCI device where the device writes
back data to system memory that should be exclusively under the
control of the guest side driver.
In OHCI specification Section 5.2.7, it mentioned "In all cases, Host
Controller Driver is responsible for the insertion and removal of all
Endpoint Descriptors in the various Host Controller Endpoint
Descriptor lists". In the ohci_frame_boundary(), ohci_put_hcca()
writes the entire hcca back including the interrupt ED lists which
should be under driver control. This violates the specification and
can race with a host driver updating that list at the same time.
In the OHCI Spec Section 4.6, Transfer Descriptor Queue Processing, it
mentioned "Since the TD pointed to by TailP is not accessed by the HC,
the Host Controller Driver can initialize that TD and link at least
one other to it without creating a coherency or synchronization
problem". While the function ohci_put_ed() writes the entire endpoint
descriptor back including the TailP which should under driver
control. This violate the specification and can race with a host
driver updating the TD list at the same time.
In each case the solution is to make sure we don't write data which is
under driver control.
Cc: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove the uhci and ohci init wrappers, which all wrapped a
pci_create_simple() one-liner. Switch callsites to call
pci_create_simple directly. Remove the header files where
the wrappers where declared.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reorganize usb source files. Create a new hw/usb/ directory and move
all usb source code to that place. Also make filenames a bit more
descriptive. Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-". Fixup paths Makefile and include
paths to make it compile. No code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* stefanha/tracing:
vga: add trace event for ppm_save
console: add some trace events
maintainers: Add docs/tracing.txt to Tracing
docs: correct ./configure line in tracing.txt
trace: make trace_thread_create() use its function arg
tracetool: Omit useless QEMU_*_ENABLED() check
trace: Provide a per-event status define for conditional compilation
These were stored as NULL due to wrong cut-and-paste from set_pointer.
Reported-by: Gerhard Wiesinger <lists@wiesinger.com>
Tested-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Most MemoryRegionOps already had the const attribute.
This patch adds it to the remaining ones.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* stefanha/trivial-patches:
configure: Quote the configure args printed in config.log
osdep: Remove local definition of macro offsetof
libcacard: Spelling and grammar fixes in documentation
Spelling fixes in comments (it's -> its)
vnc: Add break statement
libcacard: Use format specifier %u instead of %d for unsigned values
Fix sign of sscanf format specifiers
block/vmdk: Fix warning from splint (comparision of unsigned value)
qmp: Fix spelling fourty -> forty
qom: Fix spelling in documentation
sh7750: Remove redundant 'struct' from MemoryRegionOps
* qemu-kvm/uq/master:
kvm: fill in padding to help valgrind
kvm: x86: Add user space part for in-kernel i8254
kvm: Add kvm_has_pit_state2 helper
i8254: Open-code timer restore
i8254: Factor out base class for KVM reuse
* kraxel/usb.42:
xhci: fix port status
xhci: fix control xfers
usb: add shortcut for control transfers
usb-host: enable pipelineing for bulk endpoints.
usb: add pipelining option to usb endpoints
usb: queue can have async packets
uhci_fill_queue: zap debug printf
usb: add USB_RET_IOERROR
usb: return BABBLE rather then NAK when we receive too much data
usb-ehci: Cleanup itd error handling
usb-ehci: Fix and simplify nakcnt handling
usb-ehci: Remove dead nakcnt code
usb-ehci: Fix cerr tracking
usb-ehci: Any packet completion except for NAK should set the interrupt
usb-ehci: Rip the queues when the async or period schedule is halted
usb-ehci: Drop cached qhs when the doorbell gets rung
usb-ehci: always call ehci_queues_rip_unused for period queues
usb-ehci: split our qh queue into async and periodic queues
usb-ehci: Never follow table entries with the T-bit set
usb-redir: Set ep type and interface
* it's -> its (fixed for all files)
* dont -> don't (only fixed in a line which was touched by the previous fix)
* distrub -> disturb (fixed in the same line)
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The 'struct' is not needed, and all other MemoryRegionOps don't use it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Don't signal port status change if the usb device isn't in attached
state. Happens with usb-host devices with the pass-through device
being plugged out at the host.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the new, direct control transfer submission method instead of
bypassing the usb core by calling usb_device_handle_control directly.
The later fails for async control transfers.
This patch gets xhci + usb-host combo going.
Add a more direct code path to submit control transfers. Instead of
feeding three usb packets (setup, data, ack) to usb_handle_packet and
have the do_token_* functions in usb.c poke the control transfer
parameters out of it just submit a single packet carrying the actual
data with the control xfer parameters filled into USBPacket->parameters.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With this patch applied USB drivers can enable pipelining per endpoint.
With pipelining enabled the usb core will continue submitting packets
even when there are still async transfers in flight instead of passing
them on one by one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This can happen today in case the ->complete() callback queues up the
next packet. Also we'll support pipelining soon, which allows to have
multiple packets per queue in flight (aka ASYNC) state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We already have USB_RET_NAK, but that means that a device does not want
to send/receive right now. But with host / network redirection we can
actually have a transaction fail due to some io error, rather then ie
the device just not having any data atm.
This patch adds a new error code named USB_RET_IOERROR for this, and uses
it were appropriate.
Notes:
-Currently all usb-controllers handle this the same as NODEV, but that
may change in the future, OHCI could indicate a CRC error instead for example.
-This patch does not touch hw/usb-musb.c, that is because the code in there
handles STALL and NAK specially and has a if status < 0 generic catch all
for all other errors
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All error statuses except for NAK are handled in a switch case, move the
handling of NAK into the same switch case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The nakcnt code in ehci_execute_complete() marked transactions as finished
when a packet completed with a result of USB_RET_NAK, but USB_RET_NAK
means that the device cannot receive / send data at that time and that
the transaction should be retried later, which is also what the usb-uhci
and usb-ohci code does.
Note that there already was some special code in place to handle this
for interrupt endpoints in the form of doing a return from
ehci_execute_complete() when reload == 0, but that for bulk transactions
this was not handled correctly (where as for example the usb-ccid device does
return USB_RET_NAK for bulk packets).
Besides that the code in ehci_execute_complete() decrement nakcnt by 1
on a packet result of USB_RET_NAK, but
-since the transaction got marked as finished,
nakcnt would never be decremented again
-there is no code checking for nakcnt becoming 0
-there is no use in re-trying the transaction within the same usb frame /
usb-ehci frame-timer call, since the status of emulated devices won't change
as long as the usb-ehci frame-timer is running
So we should simply set the nakcnt to 0 when we get a USB_RET_NAK, thus
claiming that we've tried reload times (or as many times as possible if
reload is 0).
Besides the code in ehci_execute_complete() handling USB_RET_NAK there
was also code handling it in ehci_state_executing(), which calls
ehci_execute_complete(), and then does its own handling on top of the handling
in ehci_execute_complete(), this code would decrement nakcnt *again* (if not
already 0), or restore the reload value (which was never changed) on success.
Since the double decrement was wrong to begin with, and is no longer needed
now that we set nakcnt directly to 0 on USB_RET_NAK, and the restore of reload
is not needed either, this patch simply removes all nakcnt handling from
ehci_state_executing().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes 2 bits of dead nakcnt code:
1) usb_ehci_execute calls ehci_qh_do_overlay which does:
nakcnt = reload;
and then has a block of code which is conditional on:
if (reload && !nakcnt) {
which ofcourse is never true now as nakcnt == reload.
2) ehci_state_fetchqh does:
nakcnt = reload;
but before nakcnt is ever used ehci_state_fetchqh is always followed
by a ehci_qh_do_overlay call which also does:
nakcnt = reload;
So doing this from ehci_state_fetchqh is redundant.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
cerr should only be decremented on errors which cause XactErr to be set, and
when that happens the failing transaction should be retried until cerr reaches
0 and only then should USBSTS_ERRINT be set (and inactive cleared and
USBSTS_INT set if requested).
Since we don't have any hardware level errors (and in case of redirection
the real hardware has already retried), re-trying makes no sense, so
immediately set cerr to 0 on errors which set XactErr.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As clearly stated in the 2.3.2 of the EHCI spec, any time USBERRINT get
sets then if the td has its IOC bit set USBINT should be set as well.
This means that for any status except for USB_RET_NAK we should set
USBINT if the IOC bit is set.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The purpose of the IAAD bit / the doorbell is to make the ehci controller
forget about cached qhs, this is mainly used when cancelling transactions,
the qh is unlinked from the async schedule and then the doorbell gets rung,
once the doorbell is acked by the controller the hcd knows that the qh is
no longer in use and that it can do something else with the memory, such
as re-use it for a new qh! But we keep our struct representing this qh around
for circa 250 ms. This allows for a (mightily large) race window where the
following could happen:
-hcd submits a qh at address 0xdeadbeef
-our ehci code sees the qh, sends a request to a usb-device, gets a result
of USB_RET_ASYNC, sets the async_state of the qh to EHCI_ASYNC_INFLIGHT
-hcd unlinks the qh at address 0xdeadbeef
-hcd rings the doorbell, wait for us to ack it
-hcd re-uses the qh at address 0xdeadbeef
-our ehci code sees the qh, looks in the async_queue, sees there already is
a qh at address 0xdeadbeef there with async_state of EHCI_ASYNC_INFLIGHT,
does nothing
-the *original* (which the hcd thinks it has cancelled) transaction finishes
-our ehci code sees the qh on yet another pass through the async list,
looks in the async_queue, sees there already is a qh at address 0xdeadbeef
there with async_state of EHCI_ASYNC_COMPLETED, and finished the transaction
with the results of the *original* transaction.
Not good (tm), this patch fixes this race by removing all qhs which have not
been seen during the last cycle through the async list immidiately when the
doorbell is rung.
Note this patch does not fix any actually observed problem, but upon
reading of the EHCI spec it became apparent to me that the above race could
happen and the usb-ehci behavior from before this patch is not good.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch USB 2 devices with interrupt endpoints were not working
properly. The problem is that to avoid loops we stop processing as soon
as we encounter a queue-head (qh) we've already seen since qhs can be linked
in a circular fashion, this is tracked by the seen flag in our qh struct.
The resetting of the seen flag is done from ehci_queues_rip_unused which
before this patch was only called when executing the statemachine for the
async schedule.
But packets for interrupt endpoints are part of the periodic schedule! So what
would happen is that when there were no ctrl or bulk packets for a USB 2
device with an interrupt endpoint, the async schedule would become non
active, then ehci_queues_rip_unused would no longer get called and when
processing the qhs for the interrupt endpoints from the periodic schedule
their seen bit would still be 1 and they would be skipped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qhs can be part of both the async and the periodic schedule, as is shown
in later patches in this series it is useful to keep track of the qhs on
a per schedule basis.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch the T-bit was not checked in 2 places, while it should be.
Once we properly check the T-bit everywhere we no longer need the weird
entry < 0x1000 and entry > 0x1000 checks, so this patch removes them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This provides the required user space stubs to enable the in-kernel
i8254 emulation of KVM.
The in-kernel model supports lost tick compensation according to the
"delay" policy. This is enabled by default and can be switched off via a
device property.
Depending on the feature set of the host kernel (before 2.6.32), we may
have to disable the HPET or lack sound output from the PC speaker.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Same as for the APIC: To enable migration between accelerated and
non-accelerated models, we need to arm the channel 0 timer only inside
the emulated PIT model. The common code just saves/restores that timer
to the the next_transition_time field.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Applying the concept used for the *PICs once again: establish a base
class for the i8254 that can be used both by the current user space
emulation and the upcoming KVM in-kernel version. We share most of the
public interface of the i8254, specifically to the pcspk, vmstate, reset
and certain init parts.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xilinx zynq-7000 machine model. Also includes device model for the zynq-specific
system level control register (SLCR) module.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Device model for cadence gem ethernet controller.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Implemented cadence Triple Timer Counter (TCC)
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Implemented cadence UART serial controller
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Use the -dtb argument for passing is a custom dtb rather than the old
hardcoded "mb.dtb"
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
defined macros for the addresses of the peripherals in machine model
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
