shpc: standard hot plug controller

This adds support for SHPC interface, as defined by PCI Standard
Hot-Plug Controller and Subsystem Specification, Rev 1.0
http://www.pcisig.com/specifications/conventional/pci_hot_plug/SHPC_10

Only SHPC intergrated with a PCI-to-PCI bridge is supported,
SHPC integrated with a host bridge would need more work.

All main SHPC features are supported:
- MRL sensor
- Attention button
- Attention indicator
- Power indicator

Wake on hotplug and serr generation are stubbed out but unused
as we don't have interfaces to generate these events ATM.

One issue that isn't completely resolved is that qemu currently
expects an "eject" interface, which SHPC does not provide: it merely
removes the power to device and it's up to the user to remove the device
from slot. This patch works around that by ejecting the device
when power is removed and power LED goes off.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit is contained in:
Michael S. Tsirkin 2012-02-12 14:12:21 +02:00
parent 8a3d80faf7
commit 1dc324d20f
5 changed files with 737 additions and 0 deletions

View File

@ -215,6 +215,7 @@ hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
hw-obj-y += fw_cfg.o
hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
hw-obj-$(CONFIG_PCI) += msix.o msi.o
hw-obj-$(CONFIG_PCI) += shpc.o
hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
hw-obj-y += watchdog.o

View File

@ -126,6 +126,9 @@ enum {
/* command register SERR bit enabled */
#define QEMU_PCI_CAP_SERR_BITNR 4
QEMU_PCI_CAP_SERR = (1 << QEMU_PCI_CAP_SERR_BITNR),
/* Standard hot plug controller. */
#define QEMU_PCI_SHPC_BITNR 5
QEMU_PCI_CAP_SHPC = (1 << QEMU_PCI_SHPC_BITNR),
};
#define TYPE_PCI_DEVICE "pci-device"
@ -230,6 +233,9 @@ struct PCIDevice {
/* PCI Express */
PCIExpressDevice exp;
/* SHPC */
SHPCDevice *shpc;
/* Location of option rom */
char *romfile;
bool has_rom;

681
hw/shpc.c Normal file
View File

@ -0,0 +1,681 @@
#include <strings.h>
#include <stdint.h>
#include "range.h"
#include "range.h"
#include "shpc.h"
#include "pci.h"
#include "pci_internals.h"
#include "msi.h"
/* TODO: model power only and disabled slot states. */
/* TODO: handle SERR and wakeups */
/* TODO: consider enabling 66MHz support */
/* TODO: remove fully only on state DISABLED and LED off.
* track state to properly record this. */
/* SHPC Working Register Set */
#define SHPC_BASE_OFFSET 0x00 /* 4 bytes */
#define SHPC_SLOTS_33 0x04 /* 4 bytes. Also encodes PCI-X slots. */
#define SHPC_SLOTS_66 0x08 /* 4 bytes. */
#define SHPC_NSLOTS 0x0C /* 1 byte */
#define SHPC_FIRST_DEV 0x0D /* 1 byte */
#define SHPC_PHYS_SLOT 0x0E /* 2 byte */
#define SHPC_PHYS_NUM_MAX 0x7ff
#define SHPC_PHYS_NUM_UP 0x2000
#define SHPC_PHYS_MRL 0x4000
#define SHPC_PHYS_BUTTON 0x8000
#define SHPC_SEC_BUS 0x10 /* 2 bytes */
#define SHPC_SEC_BUS_33 0x0
#define SHPC_SEC_BUS_66 0x1 /* Unused */
#define SHPC_SEC_BUS_MASK 0x7
#define SHPC_MSI_CTL 0x12 /* 1 byte */
#define SHPC_PROG_IFC 0x13 /* 1 byte */
#define SHPC_PROG_IFC_1_0 0x1
#define SHPC_CMD_CODE 0x14 /* 1 byte */
#define SHPC_CMD_TRGT 0x15 /* 1 byte */
#define SHPC_CMD_TRGT_MIN 0x1
#define SHPC_CMD_TRGT_MAX 0x1f
#define SHPC_CMD_STATUS 0x16 /* 2 bytes */
#define SHPC_CMD_STATUS_BUSY 0x1
#define SHPC_CMD_STATUS_MRL_OPEN 0x2
#define SHPC_CMD_STATUS_INVALID_CMD 0x4
#define SHPC_CMD_STATUS_INVALID_MODE 0x8
#define SHPC_INT_LOCATOR 0x18 /* 4 bytes */
#define SHPC_INT_COMMAND 0x1
#define SHPC_SERR_LOCATOR 0x1C /* 4 bytes */
#define SHPC_SERR_INT 0x20 /* 4 bytes */
#define SHPC_INT_DIS 0x1
#define SHPC_SERR_DIS 0x2
#define SHPC_CMD_INT_DIS 0x4
#define SHPC_ARB_SERR_DIS 0x8
#define SHPC_CMD_DETECTED 0x10000
#define SHPC_ARB_DETECTED 0x20000
/* 4 bytes * slot # (start from 0) */
#define SHPC_SLOT_REG(s) (0x24 + (s) * 4)
/* 2 bytes */
#define SHPC_SLOT_STATUS(s) (0x0 + SHPC_SLOT_REG(s))
/* Same slot state masks are used for command and status registers */
#define SHPC_SLOT_STATE_MASK 0x03
#define SHPC_SLOT_STATE_SHIFT \
(ffs(SHPC_SLOT_STATE_MASK) - 1)
#define SHPC_STATE_NO 0x0
#define SHPC_STATE_PWRONLY 0x1
#define SHPC_STATE_ENABLED 0x2
#define SHPC_STATE_DISABLED 0x3
#define SHPC_SLOT_PWR_LED_MASK 0xC
#define SHPC_SLOT_PWR_LED_SHIFT \
(ffs(SHPC_SLOT_PWR_LED_MASK) - 1)
#define SHPC_SLOT_ATTN_LED_MASK 0x30
#define SHPC_SLOT_ATTN_LED_SHIFT \
(ffs(SHPC_SLOT_ATTN_LED_MASK) - 1)
#define SHPC_LED_NO 0x0
#define SHPC_LED_ON 0x1
#define SHPC_LED_BLINK 0x2
#define SHPC_LED_OFF 0x3
#define SHPC_SLOT_STATUS_PWR_FAULT 0x40
#define SHPC_SLOT_STATUS_BUTTON 0x80
#define SHPC_SLOT_STATUS_MRL_OPEN 0x100
#define SHPC_SLOT_STATUS_66 0x200
#define SHPC_SLOT_STATUS_PRSNT_MASK 0xC00
#define SHPC_SLOT_STATUS_PRSNT_EMPTY 0x3
#define SHPC_SLOT_STATUS_PRSNT_25W 0x1
#define SHPC_SLOT_STATUS_PRSNT_15W 0x2
#define SHPC_SLOT_STATUS_PRSNT_7_5W 0x0
#define SHPC_SLOT_STATUS_PRSNT_PCIX 0x3000
/* 1 byte */
#define SHPC_SLOT_EVENT_LATCH(s) (0x2 + SHPC_SLOT_REG(s))
/* 1 byte */
#define SHPC_SLOT_EVENT_SERR_INT_DIS(d, s) (0x3 + SHPC_SLOT_REG(s))
#define SHPC_SLOT_EVENT_PRESENCE 0x01
#define SHPC_SLOT_EVENT_ISOLATED_FAULT 0x02
#define SHPC_SLOT_EVENT_BUTTON 0x04
#define SHPC_SLOT_EVENT_MRL 0x08
#define SHPC_SLOT_EVENT_CONNECTED_FAULT 0x10
/* Bits below are used for Serr/Int disable only */
#define SHPC_SLOT_EVENT_MRL_SERR_DIS 0x20
#define SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS 0x40
#define SHPC_MIN_SLOTS 1
#define SHPC_MAX_SLOTS 31
#define SHPC_SIZEOF(d) SHPC_SLOT_REG((d)->shpc->nslots)
/* SHPC Slot identifiers */
/* Hotplug supported at 31 slots out of the total 32. We reserve slot 0,
and give the rest of them physical *and* pci numbers starting from 1, so
they match logical numbers. Note: this means that multiple slots must have
different chassis number values, to make chassis+physical slot unique.
TODO: make this configurable? */
#define SHPC_IDX_TO_LOGICAL(slot) ((slot) + 1)
#define SHPC_LOGICAL_TO_IDX(target) ((target) - 1)
#define SHPC_IDX_TO_PCI(slot) ((slot) + 1)
#define SHPC_PCI_TO_IDX(pci_slot) ((pci_slot) - 1)
#define SHPC_IDX_TO_PHYSICAL(slot) ((slot) + 1)
static int roundup_pow_of_two(int x)
{
x |= (x >> 1);
x |= (x >> 2);
x |= (x >> 4);
x |= (x >> 8);
x |= (x >> 16);
return x + 1;
}
static uint16_t shpc_get_status(SHPCDevice *shpc, int slot, uint16_t msk)
{
uint8_t *status = shpc->config + SHPC_SLOT_STATUS(slot);
return (pci_get_word(status) & msk) >> (ffs(msk) - 1);
}
static void shpc_set_status(SHPCDevice *shpc,
int slot, uint8_t value, uint16_t msk)
{
uint8_t *status = shpc->config + SHPC_SLOT_STATUS(slot);
pci_word_test_and_clear_mask(status, msk);
pci_word_test_and_set_mask(status, value << (ffs(msk) - 1));
}
static void shpc_interrupt_update(PCIDevice *d)
{
SHPCDevice *shpc = d->shpc;
int slot;
int level = 0;
uint32_t serr_int;
uint32_t int_locator = 0;
/* Update interrupt locator register */
for (slot = 0; slot < shpc->nslots; ++slot) {
uint8_t event = shpc->config[SHPC_SLOT_EVENT_LATCH(slot)];
uint8_t disable = shpc->config[SHPC_SLOT_EVENT_SERR_INT_DIS(d, slot)];
uint32_t mask = 1 << SHPC_IDX_TO_LOGICAL(slot);
if (event & ~disable) {
int_locator |= mask;
}
}
serr_int = pci_get_long(shpc->config + SHPC_SERR_INT);
if ((serr_int & SHPC_CMD_DETECTED) && !(serr_int & SHPC_CMD_INT_DIS)) {
int_locator |= SHPC_INT_COMMAND;
}
pci_set_long(shpc->config + SHPC_INT_LOCATOR, int_locator);
level = (!(serr_int & SHPC_INT_DIS) && int_locator) ? 1 : 0;
if (msi_enabled(d) && shpc->msi_requested != level)
msi_notify(d, 0);
else
qemu_set_irq(d->irq[0], level);
shpc->msi_requested = level;
}
static void shpc_set_sec_bus_speed(SHPCDevice *shpc, uint8_t speed)
{
switch (speed) {
case SHPC_SEC_BUS_33:
shpc->config[SHPC_SEC_BUS] &= ~SHPC_SEC_BUS_MASK;
shpc->config[SHPC_SEC_BUS] |= speed;
break;
default:
pci_word_test_and_set_mask(shpc->config + SHPC_CMD_STATUS,
SHPC_CMD_STATUS_INVALID_MODE);
}
}
void shpc_reset(PCIDevice *d)
{
SHPCDevice *shpc = d->shpc;
int nslots = shpc->nslots;
int i;
memset(shpc->config, 0, SHPC_SIZEOF(d));
pci_set_byte(shpc->config + SHPC_NSLOTS, nslots);
pci_set_long(shpc->config + SHPC_SLOTS_33, nslots);
pci_set_long(shpc->config + SHPC_SLOTS_66, 0);
pci_set_byte(shpc->config + SHPC_FIRST_DEV, SHPC_IDX_TO_PCI(0));
pci_set_word(shpc->config + SHPC_PHYS_SLOT,
SHPC_IDX_TO_PHYSICAL(0) |
SHPC_PHYS_NUM_UP |
SHPC_PHYS_MRL |
SHPC_PHYS_BUTTON);
pci_set_long(shpc->config + SHPC_SERR_INT, SHPC_INT_DIS |
SHPC_SERR_DIS |
SHPC_CMD_INT_DIS |
SHPC_ARB_SERR_DIS);
pci_set_byte(shpc->config + SHPC_PROG_IFC, SHPC_PROG_IFC_1_0);
pci_set_word(shpc->config + SHPC_SEC_BUS, SHPC_SEC_BUS_33);
for (i = 0; i < shpc->nslots; ++i) {
pci_set_byte(shpc->config + SHPC_SLOT_EVENT_SERR_INT_DIS(d, i),
SHPC_SLOT_EVENT_PRESENCE |
SHPC_SLOT_EVENT_ISOLATED_FAULT |
SHPC_SLOT_EVENT_BUTTON |
SHPC_SLOT_EVENT_MRL |
SHPC_SLOT_EVENT_CONNECTED_FAULT |
SHPC_SLOT_EVENT_MRL_SERR_DIS |
SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS);
if (shpc->sec_bus->devices[PCI_DEVFN(SHPC_IDX_TO_PCI(i), 0)]) {
shpc_set_status(shpc, i, SHPC_STATE_ENABLED, SHPC_SLOT_STATE_MASK);
shpc_set_status(shpc, i, 0, SHPC_SLOT_STATUS_MRL_OPEN);
shpc_set_status(shpc, i, SHPC_SLOT_STATUS_PRSNT_7_5W,
SHPC_SLOT_STATUS_PRSNT_MASK);
shpc_set_status(shpc, i, SHPC_LED_ON, SHPC_SLOT_PWR_LED_MASK);
} else {
shpc_set_status(shpc, i, SHPC_STATE_DISABLED, SHPC_SLOT_STATE_MASK);
shpc_set_status(shpc, i, 1, SHPC_SLOT_STATUS_MRL_OPEN);
shpc_set_status(shpc, i, SHPC_SLOT_STATUS_PRSNT_EMPTY,
SHPC_SLOT_STATUS_PRSNT_MASK);
shpc_set_status(shpc, i, SHPC_LED_OFF, SHPC_SLOT_PWR_LED_MASK);
}
shpc_set_status(shpc, i, 0, SHPC_SLOT_STATUS_66);
}
shpc_set_sec_bus_speed(shpc, SHPC_SEC_BUS_33);
shpc->msi_requested = 0;
shpc_interrupt_update(d);
}
static void shpc_invalid_command(SHPCDevice *shpc)
{
pci_word_test_and_set_mask(shpc->config + SHPC_CMD_STATUS,
SHPC_CMD_STATUS_INVALID_CMD);
}
static void shpc_free_devices_in_slot(SHPCDevice *shpc, int slot)
{
int devfn;
int pci_slot = SHPC_IDX_TO_PCI(slot);
for (devfn = PCI_DEVFN(pci_slot, 0);
devfn <= PCI_DEVFN(pci_slot, PCI_FUNC_MAX - 1);
++devfn) {
PCIDevice *affected_dev = shpc->sec_bus->devices[devfn];
if (affected_dev) {
qdev_free(&affected_dev->qdev);
}
}
}
static void shpc_slot_command(SHPCDevice *shpc, uint8_t target,
uint8_t state, uint8_t power, uint8_t attn)
{
uint8_t current_state;
int slot = SHPC_LOGICAL_TO_IDX(target);
if (target < SHPC_CMD_TRGT_MIN || slot >= shpc->nslots) {
shpc_invalid_command(shpc);
return;
}
current_state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
if (current_state == SHPC_STATE_ENABLED && state == SHPC_STATE_PWRONLY) {
shpc_invalid_command(shpc);
return;
}
switch (power) {
case SHPC_LED_NO:
break;
default:
/* TODO: send event to monitor */
shpc_set_status(shpc, slot, power, SHPC_SLOT_PWR_LED_MASK);
}
switch (attn) {
case SHPC_LED_NO:
break;
default:
/* TODO: send event to monitor */
shpc_set_status(shpc, slot, attn, SHPC_SLOT_ATTN_LED_MASK);
}
if ((current_state == SHPC_STATE_DISABLED && state == SHPC_STATE_PWRONLY) ||
(current_state == SHPC_STATE_DISABLED && state == SHPC_STATE_ENABLED)) {
shpc_set_status(shpc, slot, state, SHPC_SLOT_STATE_MASK);
} else if ((current_state == SHPC_STATE_ENABLED ||
current_state == SHPC_STATE_PWRONLY) &&
state == SHPC_STATE_DISABLED) {
shpc_set_status(shpc, slot, state, SHPC_SLOT_STATE_MASK);
power = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK);
/* TODO: track what monitor requested. */
/* Look at LED to figure out whether it's ok to remove the device. */
if (power == SHPC_LED_OFF) {
shpc_free_devices_in_slot(shpc, slot);
shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN);
shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY,
SHPC_SLOT_STATUS_PRSNT_MASK);
shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
SHPC_SLOT_EVENT_BUTTON |
SHPC_SLOT_EVENT_MRL |
SHPC_SLOT_EVENT_PRESENCE;
}
}
}
static void shpc_command(SHPCDevice *shpc)
{
uint8_t code = pci_get_byte(shpc->config + SHPC_CMD_CODE);
uint8_t speed;
uint8_t target;
uint8_t attn;
uint8_t power;
uint8_t state;
int i;
/* Clear status from the previous command. */
pci_word_test_and_clear_mask(shpc->config + SHPC_CMD_STATUS,
SHPC_CMD_STATUS_BUSY |
SHPC_CMD_STATUS_MRL_OPEN |
SHPC_CMD_STATUS_INVALID_CMD |
SHPC_CMD_STATUS_INVALID_MODE);
switch (code) {
case 0x00 ... 0x3f:
target = shpc->config[SHPC_CMD_TRGT] & SHPC_CMD_TRGT_MAX;
state = (code & SHPC_SLOT_STATE_MASK) >> SHPC_SLOT_STATE_SHIFT;
power = (code & SHPC_SLOT_PWR_LED_MASK) >> SHPC_SLOT_PWR_LED_SHIFT;
attn = (code & SHPC_SLOT_ATTN_LED_MASK) >> SHPC_SLOT_ATTN_LED_SHIFT;
shpc_slot_command(shpc, target, state, power, attn);
break;
case 0x40 ... 0x47:
speed = code & SHPC_SEC_BUS_MASK;
shpc_set_sec_bus_speed(shpc, speed);
break;
case 0x48:
/* Power only all slots */
/* first verify no slots are enabled */
for (i = 0; i < shpc->nslots; ++i) {
state = shpc_get_status(shpc, i, SHPC_SLOT_STATE_MASK);
if (state == SHPC_STATE_ENABLED) {
shpc_invalid_command(shpc);
goto done;
}
}
for (i = 0; i < shpc->nslots; ++i) {
if (!(shpc_get_status(shpc, i, SHPC_SLOT_STATUS_MRL_OPEN))) {
shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
SHPC_STATE_PWRONLY, SHPC_LED_ON, SHPC_LED_NO);
} else {
shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
SHPC_STATE_NO, SHPC_LED_OFF, SHPC_LED_NO);
}
}
break;
case 0x49:
/* Enable all slots */
/* TODO: Spec says this shall fail if some are already enabled.
* This doesn't make sense - why not? a spec bug? */
for (i = 0; i < shpc->nslots; ++i) {
state = shpc_get_status(shpc, i, SHPC_SLOT_STATE_MASK);
if (state == SHPC_STATE_ENABLED) {
shpc_invalid_command(shpc);
goto done;
}
}
for (i = 0; i < shpc->nslots; ++i) {
if (!(shpc_get_status(shpc, i, SHPC_SLOT_STATUS_MRL_OPEN))) {
shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
SHPC_STATE_ENABLED, SHPC_LED_ON, SHPC_LED_NO);
} else {
shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
SHPC_STATE_NO, SHPC_LED_OFF, SHPC_LED_NO);
}
}
break;
default:
shpc_invalid_command(shpc);
break;
}
done:
pci_long_test_and_set_mask(shpc->config + SHPC_SERR_INT, SHPC_CMD_DETECTED);
}
static void shpc_write(PCIDevice *d, unsigned addr, uint64_t val, int l)
{
SHPCDevice *shpc = d->shpc;
int i;
if (addr >= SHPC_SIZEOF(d)) {
return;
}
l = MIN(l, SHPC_SIZEOF(d) - addr);
/* TODO: code duplicated from pci.c */
for (i = 0; i < l; val >>= 8, ++i) {
unsigned a = addr + i;
uint8_t wmask = shpc->wmask[a];
uint8_t w1cmask = shpc->w1cmask[a];
assert(!(wmask & w1cmask));
shpc->config[a] = (shpc->config[a] & ~wmask) | (val & wmask);
shpc->config[a] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
}
if (ranges_overlap(addr, l, SHPC_CMD_CODE, 2)) {
shpc_command(shpc);
}
shpc_interrupt_update(d);
}
static uint64_t shpc_read(PCIDevice *d, unsigned addr, int l)
{
uint64_t val = 0x0;
if (addr >= SHPC_SIZEOF(d)) {
return val;
}
l = MIN(l, SHPC_SIZEOF(d) - addr);
memcpy(&val, d->shpc->config + addr, l);
return val;
}
/* SHPC Bridge Capability */
#define SHPC_CAP_LENGTH 0x08
#define SHPC_CAP_DWORD_SELECT 0x2 /* 1 byte */
#define SHPC_CAP_CxP 0x3 /* 1 byte: CSP, CIP */
#define SHPC_CAP_DWORD_DATA 0x4 /* 4 bytes */
#define SHPC_CAP_CSP_MASK 0x4
#define SHPC_CAP_CIP_MASK 0x8
static uint8_t shpc_cap_dword(PCIDevice *d)
{
return pci_get_byte(d->config + d->shpc->cap + SHPC_CAP_DWORD_SELECT);
}
/* Update dword data capability register */
static void shpc_cap_update_dword(PCIDevice *d)
{
unsigned data;
data = shpc_read(d, shpc_cap_dword(d) * 4, 4);
pci_set_long(d->config + d->shpc->cap + SHPC_CAP_DWORD_DATA, data);
}
/* Add SHPC capability to the config space for the device. */
static int shpc_cap_add_config(PCIDevice *d)
{
uint8_t *config;
int config_offset;
config_offset = pci_add_capability(d, PCI_CAP_ID_SHPC,
0, SHPC_CAP_LENGTH);
if (config_offset < 0) {
return config_offset;
}
config = d->config + config_offset;
pci_set_byte(config + SHPC_CAP_DWORD_SELECT, 0);
pci_set_byte(config + SHPC_CAP_CxP, 0);
pci_set_long(config + SHPC_CAP_DWORD_DATA, 0);
d->shpc->cap = config_offset;
/* Make dword select and data writeable. */
pci_set_byte(d->wmask + config_offset + SHPC_CAP_DWORD_SELECT, 0xff);
pci_set_long(d->wmask + config_offset + SHPC_CAP_DWORD_DATA, 0xffffffff);
return 0;
}
static uint64_t shpc_mmio_read(void *opaque, target_phys_addr_t addr,
unsigned size)
{
return shpc_read(opaque, addr, size);
}
static void shpc_mmio_write(void *opaque, target_phys_addr_t addr,
uint64_t val, unsigned size)
{
shpc_write(opaque, addr, val, size);
}
static const MemoryRegionOps shpc_mmio_ops = {
.read = shpc_mmio_read,
.write = shpc_mmio_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
/* SHPC ECN requires dword accesses, but the original 1.0 spec doesn't.
* It's easier to suppport all sizes than worry about it. */
.min_access_size = 1,
.max_access_size = 4,
},
};
static int shpc_device_hotplug(DeviceState *qdev, PCIDevice *affected_dev,
PCIHotplugState hotplug_state)
{
int pci_slot = PCI_SLOT(affected_dev->devfn);
uint8_t state;
uint8_t led;
PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev);
SHPCDevice *shpc = d->shpc;
int slot = SHPC_PCI_TO_IDX(pci_slot);
if (pci_slot < SHPC_IDX_TO_PCI(0) || slot >= shpc->nslots) {
error_report("Unsupported PCI slot %d for standard hotplug "
"controller. Valid slots are between %d and %d.",
pci_slot, SHPC_IDX_TO_PCI(0),
SHPC_IDX_TO_PCI(shpc->nslots) - 1);
return -1;
}
/* Don't send event when device is enabled during qemu machine creation:
* it is present on boot, no hotplug event is necessary. We do send an
* event when the device is disabled later. */
if (hotplug_state == PCI_COLDPLUG_ENABLED) {
shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
SHPC_SLOT_STATUS_PRSNT_MASK);
return 0;
}
if (hotplug_state == PCI_HOTPLUG_DISABLED) {
shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= SHPC_SLOT_EVENT_BUTTON;
state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
led = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK);
if (state == SHPC_STATE_DISABLED && led == SHPC_LED_OFF) {
shpc_free_devices_in_slot(shpc, slot);
shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN);
shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY,
SHPC_SLOT_STATUS_PRSNT_MASK);
shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
SHPC_SLOT_EVENT_MRL |
SHPC_SLOT_EVENT_PRESENCE;
}
} else {
/* This could be a cancellation of the previous removal.
* We check MRL state to figure out. */
if (shpc_get_status(shpc, slot, SHPC_SLOT_STATUS_MRL_OPEN)) {
shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
SHPC_SLOT_STATUS_PRSNT_MASK);
shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
SHPC_SLOT_EVENT_BUTTON |
SHPC_SLOT_EVENT_MRL |
SHPC_SLOT_EVENT_PRESENCE;
} else {
/* Press attention button to cancel removal */
shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
SHPC_SLOT_EVENT_BUTTON;
}
}
shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_66);
shpc_interrupt_update(d);
return 0;
}
/* Initialize the SHPC structure in bridge's BAR. */
int shpc_init(PCIDevice *d, PCIBus *sec_bus, MemoryRegion *bar, unsigned offset)
{
int i, ret;
int nslots = SHPC_MAX_SLOTS; /* TODO: qdev property? */
SHPCDevice *shpc = d->shpc = g_malloc0(sizeof(*d->shpc));
shpc->sec_bus = sec_bus;
ret = shpc_cap_add_config(d);
if (ret) {
g_free(d->shpc);
return ret;
}
if (nslots < SHPC_MIN_SLOTS) {
return 0;
}
if (nslots > SHPC_MAX_SLOTS ||
SHPC_IDX_TO_PCI(nslots) > PCI_SLOT_MAX) {
/* TODO: report an error mesage that makes sense. */
return -EINVAL;
}
shpc->nslots = nslots;
shpc->config = g_malloc0(SHPC_SIZEOF(d));
shpc->cmask = g_malloc0(SHPC_SIZEOF(d));
shpc->wmask = g_malloc0(SHPC_SIZEOF(d));
shpc->w1cmask = g_malloc0(SHPC_SIZEOF(d));
shpc_reset(d);
pci_set_long(shpc->config + SHPC_BASE_OFFSET, offset);
pci_set_byte(shpc->wmask + SHPC_CMD_CODE, 0xff);
pci_set_byte(shpc->wmask + SHPC_CMD_TRGT, SHPC_CMD_TRGT_MAX);
pci_set_byte(shpc->wmask + SHPC_CMD_TRGT, SHPC_CMD_TRGT_MAX);
pci_set_long(shpc->wmask + SHPC_SERR_INT,
SHPC_INT_DIS |
SHPC_SERR_DIS |
SHPC_CMD_INT_DIS |
SHPC_ARB_SERR_DIS);
pci_set_long(shpc->w1cmask + SHPC_SERR_INT,
SHPC_CMD_DETECTED |
SHPC_ARB_DETECTED);
for (i = 0; i < nslots; ++i) {
pci_set_byte(shpc->wmask +
SHPC_SLOT_EVENT_SERR_INT_DIS(d, i),
SHPC_SLOT_EVENT_PRESENCE |
SHPC_SLOT_EVENT_ISOLATED_FAULT |
SHPC_SLOT_EVENT_BUTTON |
SHPC_SLOT_EVENT_MRL |
SHPC_SLOT_EVENT_CONNECTED_FAULT |
SHPC_SLOT_EVENT_MRL_SERR_DIS |
SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS);
pci_set_byte(shpc->w1cmask +
SHPC_SLOT_EVENT_LATCH(i),
SHPC_SLOT_EVENT_PRESENCE |
SHPC_SLOT_EVENT_ISOLATED_FAULT |
SHPC_SLOT_EVENT_BUTTON |
SHPC_SLOT_EVENT_MRL |
SHPC_SLOT_EVENT_CONNECTED_FAULT);
}
/* TODO: init cmask */
memory_region_init_io(&shpc->mmio, &shpc_mmio_ops, d, "shpc-mmio",
SHPC_SIZEOF(d));
shpc_cap_update_dword(d);
memory_region_add_subregion(bar, offset, &shpc->mmio);
pci_bus_hotplug(sec_bus, shpc_device_hotplug, &d->qdev);
d->cap_present |= QEMU_PCI_CAP_SHPC;
return 0;
}
int shpc_bar_size(PCIDevice *d)
{
return roundup_pow_of_two(SHPC_SLOT_REG(SHPC_MAX_SLOTS));
}
void shpc_cleanup(PCIDevice *d, MemoryRegion *bar)
{
SHPCDevice *shpc = d->shpc;
d->cap_present &= ~QEMU_PCI_CAP_SHPC;
memory_region_del_subregion(bar, &shpc->mmio);
/* TODO: cleanup config space changes? */
g_free(shpc->config);
g_free(shpc->cmask);
g_free(shpc->wmask);
g_free(shpc->w1cmask);
memory_region_destroy(&shpc->mmio);
g_free(shpc);
}
void shpc_cap_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
{
if (!ranges_overlap(addr, l, d->shpc->cap, SHPC_CAP_LENGTH)) {
return;
}
if (ranges_overlap(addr, l, d->shpc->cap + SHPC_CAP_DWORD_DATA, 4)) {
unsigned dword_data;
dword_data = pci_get_long(d->shpc->config + d->shpc->cap
+ SHPC_CAP_DWORD_DATA);
shpc_write(d, shpc_cap_dword(d) * 4, dword_data, 4);
}
/* Update cap dword data in case guest is going to read it. */
shpc_cap_update_dword(d);
}
static void shpc_save(QEMUFile *f, void *pv, size_t size)
{
PCIDevice *d = container_of(pv, PCIDevice, shpc);
qemu_put_buffer(f, d->shpc->config, SHPC_SIZEOF(d));
}
static int shpc_load(QEMUFile *f, void *pv, size_t size)
{
PCIDevice *d = container_of(pv, PCIDevice, shpc);
int ret = qemu_get_buffer(f, d->shpc->config, SHPC_SIZEOF(d));
if (ret != SHPC_SIZEOF(d)) {
return -EINVAL;
}
/* Make sure we don't lose notifications. An extra interrupt is harmless. */
d->shpc->msi_requested = 0;
shpc_interrupt_update(d);
return 0;
}
VMStateInfo shpc_vmstate_info = {
.name = "shpc",
.get = shpc_load,
.put = shpc_save,
};

48
hw/shpc.h Normal file
View File

@ -0,0 +1,48 @@
#ifndef SHPC_H
#define SHPC_H
#include "qemu-common.h"
#include "memory.h"
#include "vmstate.h"
struct SHPCDevice {
/* Capability offset in device's config space */
int cap;
/* # of hot-pluggable slots */
int nslots;
/* SHPC WRS: working register set */
uint8_t *config;
/* Used to enable checks on load. Note that writable bits are
* never checked even if set in cmask. */
uint8_t *cmask;
/* Used to implement R/W bytes */
uint8_t *wmask;
/* Used to implement RW1C(Write 1 to Clear) bytes */
uint8_t *w1cmask;
/* MMIO for the SHPC BAR */
MemoryRegion mmio;
/* Bus controlled by this SHPC */
PCIBus *sec_bus;
/* MSI already requested for this event */
int msi_requested;
};
void shpc_reset(PCIDevice *d);
int shpc_bar_size(PCIDevice *dev);
int shpc_init(PCIDevice *dev, PCIBus *sec_bus, MemoryRegion *bar, unsigned off);
void shpc_cleanup(PCIDevice *dev, MemoryRegion *bar);
void shpc_cap_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int len);
extern VMStateInfo shpc_vmstate_info;
#define SHPC_VMSTATE(_field, _type) \
VMSTATE_BUFFER_UNSAFE_INFO(_field, _type, 0, shpc_vmstate_info, 0)
#endif

View File

@ -260,6 +260,7 @@ typedef struct SSIBus SSIBus;
typedef struct EventNotifier EventNotifier;
typedef struct VirtIODevice VirtIODevice;
typedef struct QEMUSGList QEMUSGList;
typedef struct SHPCDevice SHPCDevice;
typedef uint64_t pcibus_t;