MacOS (un)helpfully leaves the FIFO engine running even when all the samples have
been written to the hardware, and expects the FIFO status flags and IRQ to be
updated continuously.
There is an additional problem in that not all audio backends guarantee an
all-zero output when there is no FIFO data available, in particular the Windows
dsound backend which re-uses its internal circular buffer causing the last played
sound to loop indefinitely.
Whilst this is effectively a bug in the Windows dsound backend, work around it
for now using a simple heuristic: if the FIFO remains empty for half a cycle
(~23ms) then continuously fill the generated buffer with empty silence.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Apple Sound Chip was primarily used by the Macintosh II to generate sound
in hardware which was previously handled by the toolbox ROM with software
interrupts.
Implement both the standard ASC and also the enhanced ASC (EASC) functionality
which is used in the Quadra 800.
Note that whilst real ASC hardware uses AUDIO_FORMAT_S8, this implementation uses
AUDIO_FORMAT_U8 instead because AUDIO_FORMAT_S8 is rarely used and not supported
by some audio backends like PulseAudio and DirectSound when played directly with
-audiodev out.mixing-engine=off.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Co-developed-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231004083806.757242-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MacOS attempts a series of writes and reads over the entire RAM area in order
to determine the amount of RAM within the machine. Allow accesses to the
entire RAM area ignoring writes and always reading zero for areas where there
is no physical RAM installed to allow MacOS to detect the memory size without
faulting.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It is needed because it defines the BIOSConfig area.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20231004083806.757242-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MacOS reads this address to identify the hardware.
This is a basic implementation returning the ID of Quadra 800.
Details:
http://mess.redump.net/mess/driver_info/mac_technical_notes
"There are 3 ID schemes [...]
The third and most scalable is a machine ID register at 0x5ffffffc.
The top word must be 0xa55a to be valid. Then bits 15-11 are 0 for
consumer Macs, 1 for portables, 2 for high-end 68k, and 3 for high-end
PowerPC. Bit 10 is 1 if additional ID bits appear elsewhere (e.g. in VIA1).
The rest of the bits are a per-model identifier.
Model Lower 16 bits of ID
...
Quadra/Centris 610/650/800 0x2BAD"
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The djMEMC controller is used to store information related to the physical memory
configuration.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmUd4/YPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpyM8H/02cRbJcQOjYt7j68zPW6GaDXxBI/UmdWDyG
15LZZbGNOPjyjNd3Vz1M7stQ5rhoKcgo/RdI+0E60a78svgW5JvpXoXR3pksc3Dx
v28B/akXwHUErYFSZQ+2VHNc8OhCd0v2ehxZxbwPEAYIOAj3hcCIVoPGXTnKJmAJ
imr5hjH0wZUc0+xdsmn8Vfdv5NTzpwfVObbGiMZejeJsaoh0y6Rt8RANBMY67KQD
S7/HPlVuDYf/y43t4ZEHNYuV9RaCdZZYlLWwV1scdKaYcofgmtJOKbOdCjHRXgj+
004Afb3rggIoCfnCzOFzhGx+MLDtLjvEn2N4oLEWCLi+k/3huaA=
=GAvH
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci: features, cleanups
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...
Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd ("hw/core: remove needless
includes") because it removed an adjacent #include.
Add three new vhost-user protocol
`VHOST_USER_BACKEND_SHARED_OBJECT_* messages`.
These new messages are sent from vhost-user
back-ends to interact with the virtio-dmabuf
table in order to add or remove themselves as
virtio exporters, or lookup for virtio dma-buf
shared objects.
The action taken in the front-end depends
on the type stored in the virtio shared
object hash table.
When the table holds a pointer to a vhost
backend for a given UUID, the front-end sends
a VHOST_USER_GET_SHARED_OBJECT to the
backend holding the shared object.
The messages can only be sent after successfully
negotiating a new VHOST_USER_PROTOCOL_F_SHARED_OBJECT
vhost-user protocol feature bit.
Finally, refactor code to send response message so
that all common parts both for the common REPLY_ACK
case, and other data responses, can call it and
avoid code repetition.
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-4-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This API manages objects (in this iteration,
dmabuf fds) that can be shared along different
virtio devices, associated to a UUID.
The API allows the different devices to add,
remove and/or retrieve the objects by simply
invoking the public functions that reside in the
virtio-dmabuf file.
For vhost backends, the API stores the pointer
to the backend holding the object.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-3-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add hash function to uuid module using the
djb2 hash algorithm.
Add a couple simple unit tests for the hash
function, checking collisions for similar UUIDs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-2-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
32-bit x86 systems do not have a reserved memory for hole64. On those 32-bit
systems without PSE36 or PAE CPU features, hotplugging memory devices are not
supported by QEMU as QEMU always places hotplugged memory above 4 GiB boundary
which is beyond the physical address space of the processor. Linux guests also
does not support memory hotplug on those systems. Please see Linux
kernel commit b59d02ed08690 ("mm/memory_hotplug: disable the functionality
for 32b") for more details.
Therefore, the maximum limit of the guest physical address in the absence of
additional memory devices effectively coincides with the end of
"above 4G memory space" region for 32-bit x86 without PAE/PSE36. When users
configure additional memory devices, after properly accounting for the
additional device memory region to find the maximum value of the guest
physical address, the address will be outside the range of the processor's
physical address space.
This change adds improvements to take above into consideration.
For example, previously this was allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
With this change now it is no longer allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
qemu-system-x86_64: Address space limit 0xffffffff < 0x2bfffffff phys-bits too low (32)
However, the following are allowed since on both cases physical address
space of the processor is 36 bits:
$ ./qemu-system-x86_64 -cpu pentium2 -m size=10G
$ ./qemu-system-x86_64 -cpu pentium,pse36=on -m size=10G
For 32-bit, without PAE/PSE36, hotplugging additional memory is no longer allowed.
$ ./qemu-system-i386 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
$ ./qemu-system-i386 -machine q35 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
A new compatibility flag is introduced to make sure pc_max_used_gpa() keeps
returning the old value for machines 8.1 and older.
Therefore, the above is still allowed for older machine types in order to support
compatibility. Hence, the following still works:
$ ./qemu-system-i386 -machine pc-i440fx-8.1 -m size=1G,maxmem=3G,slots=2
$ ./qemu-system-i386 -machine pc-q35-8.1 -m size=1G,maxmem=3G,slots=2
Further, following is also allowed as with PSE36, the processor has 36-bit
address space:
$ ./qemu-system-i386 -cpu 486,pse36=on -m size=1G,maxmem=3G,slots=2
After calling CPUID with EAX=0x80000001, all AMD64 compliant processors
have the longmode-capable-bit turned on in the extended feature flags (bit 29)
in EDX. The absence of CPUID longmode can be used to differentiate between
32-bit and 64-bit processors and is the recommended approach. QEMU takes this
approach elsewhere (for example, please see x86_cpu_realizefn()), With
this change, pc_max_used_gpa() also uses the same method to detect 32-bit
processors.
Unit tests are modified to not run 32-bit x86 tests that use memory hotplug.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230922160413.165702-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support these decoders in CXL host bridges (pxb-cxl), CXL Switch USP
and CXL Type 3 end points.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230913132523.29780-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to avoid having the size of the per HDM decoder register block
repeated in lots of places, create the register definitions for HDM
decoder 1 and use the offset between the first registers in HDM decoder 0 and
HDM decoder 1 to establish the offset.
Calculate in each function as this is more obvious and leads to shorter
line lengths than a single #define which would need a long name
to be specific enough.
Note that the code currently only supports one decoder, so the bugs this
fixes don't actually affect anything.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230913132523.29780-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As an encoded version of these key configuration parameters is available
in a register, provide functions to extract it again so as to avoid
the need for duplicating the storage.
Whilst here update the _enc() function to include additional values
as defined in the CXL 3.0 specification. Whilst they are not
currently used in the emulation, they may be in future and it is
easier to compare with the specification if all values are covered.
Add a spec reference for cxl_interleave_ways_enc() for consistency
with the target count equivalent (and because it's nice to know where
the magic numbers come from).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230913132523.29780-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no strong justification for keeping these in the header
so push them down into the associated cxl-component-utils.c file.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230913132523.29780-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that TYPE_ACPI_GED_X86 doesn't assign AcpiDeviceIfClass::madt_cpu any more
it is the same as TYPE_ACPI_GED.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "hw/boards.h" is unused since the previous commit. Since its removal
requires include fixes in various unrelated files to keep the code compiling it
has been split in a dedicated commit.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This virtual method was always set to the x86-specific pc_madt_cpu_entry(),
even in piix4 which is also used in MIPS. The previous changes use
pc_madt_cpu_entry() otherwise, so madt_cpu can be dropped.
Since pc_madt_cpu_entry() is now only used in x86-specific code, the stub
in hw/acpi/acpi-x86-stub can be removed as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_cpus_aml() is architecture independent but needs to create architecture-
specific CPU AML. So far this was achieved by using a virtual method from
TYPE_ACPI_DEVICE_IF. However, build_cpus_aml() would resolve this interface from
global (!) state. This makes it quite incomprehensible where this interface
comes from (TYPE_PIIX4_PM?, TYPE_ICH9_LPC_DEVICE?, TYPE_ACPI_GED_X86?) an can
lead to crashes when the generic code is ported to new architectures.
So far, build_cpus_aml() is only called in architecture-specific code -- and
only in x86. We can therefore simply pass pc_madt_cpu_entry() as callback to
build_cpus_aml(). This is the same callback that would be used through
TYPE_ACPI_DEVICE_IF.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend. The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can load tcg_ctx just as easily within the callee.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 00c9a5c2c3 ("accel/tcg: Restrict 'qapi-commands-machine.h'
to system emulation") we moved the definition to accel/tcg/ which is
where this function is called. No need to expose it outside.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While these functions are not TCG specific, they are not target
specific. Move them to "exec/cpu-common.h" so their callers don't
have to be tainted as target specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The EXCP_* definitions don't need to be target specific,
move them to "exec/cpu-common.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is no longer used to access the TLB,
and has been replaced by cpu->neg.tlb.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-9-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Merge comment update patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes tlb_*() functions to take CPUState instead of CPUArchState, as
they don't require the full CPUArchState. This makes it easier to
decouple target-(in)dependent code.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-4-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that there is no padding between CPUNegativeOffsetState
and CPUArchState, this value is constant across all targets.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the single use within env_tlb() and remove.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is now empty, so remove it. In the case of
m68k and tricore, this empties the class instance initfn,
so remove those as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hi
In this series:
* make sure migration-tests get 0's (daniil)
Notice that this creates a checkpatch negative, everything on that
file is volatile, no need to add a comment.
* RDMA fix from li
* MAINTAINERS
Get peter and fabiano to become co-maintainers of migration
Get Entry fro migration-rdma for Li Zhijian
* Create field_exists() (peterx)
* Improve error messages (Tejus)
Please apply.
s
-----BEGIN PGP SIGNATURE-----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=il/A
-----END PGP SIGNATURE-----
Merge tag 'migration-20231004-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231004)
Hi
In this series:
* make sure migration-tests get 0's (daniil)
Notice that this creates a checkpatch negative, everything on that
file is volatile, no need to add a comment.
* RDMA fix from li
* MAINTAINERS
Get peter and fabiano to become co-maintainers of migration
Get Entry fro migration-rdma for Li Zhijian
* Create field_exists() (peterx)
* Improve error messages (Tejus)
Please apply.
s
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmUdXTwACgkQ9IfvGFhy
# 1yPFPg//awd8HpoLs1Cq6zquBRivZOS88+tstwlBIODoU3lwPlriGU9Wquv8MqxG
# NGvcUKVsv1XXsRWYsqN3OPV6m+uRZpKrFfXEnIGNpHptf/e6KrrDGAttukalhx4n
# hJXCAActe9DlujSu+QI0L/j7R9S33zvLS46sjq7jaYLQLMzuEf5i+hiEPWfPP7AT
# 0SjrtpFaqIOGY4+VKteDirP7zJtu1+WEMVFgtAUeh3c0R8UAOsxVzBjfM3+KagIx
# NnYesFZoaOjVi1Xi1cRII7FmeKZ2OU7VBdYN9h3Y+dRIRjzF/YZOdt6Ypgb1c4gw
# ohpWJWT2tHU1z7nguSFpnqtu8xCeGhwAy+HUn/Az0TP6SCtpKRh23bZpwbfWIrHs
# eSZB6tO/eC/noQ5/d2cSs6pz7P77MkhTfxwD2+n9R4O36vSHEj3dGF0JbgCPr/Kw
# 0qfch9BQkFkAec3kiaZO/JOQ1rJuIMTbdER9gDzIODpUIc5QExs1dFwLoz5IRcpQ
# A1kOqVatMmm8jrvC3lEw76FjMX5pv11DKcS75ogWsSZHGk/jpXWABPEtiamzloqv
# c6owc5f09etkQCzT5ME8AZyZRjt7eeqIxZDZlGCjHbqZ+w/xuDsFJrEdg8YJvRLw
# AmsU5rRT2JV4lDNgZ1XG+xY9HF5LhAXYet5+UrCMBpFGk7JnHIw=
# =il/A
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Oct 2023 08:40:28 EDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231004-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: Unify and trace vmstate field_exists() checks
migration: file URI offset
migration: file URI
s390x/a-b-bios: zero the first byte of each page on start
i386/a-b-bootblock: zero the first byte of each page on start
i386/a-b-bootblock: factor test memory addresses out into constants
migration/rdma: zore out head.repeat to make the error more clear
migration: Add co-maintainers for migration
MAINTAINERS: Add entry for rdma migration
migration: Update error description outside migration.c
migration/vmstate: Introduce vmstate_save_state_with_err
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently we set _FORTIFY_SOURCE=2 as a compiler argument when the
meson 'optimization' setting is non-zero, the compiler is GCC and
the target is Linux.
While the default QEMU optimization level is 2, user could override
this by setting CFLAGS="-O0" or --extra-cflags="-O0" when running
configure and this won't be reflected in the meson 'optimization'
setting. As a result we try to enable _FORTIFY_SOURCE=2 and then the
user gets compile errors as it only works with optimization.
Rather than trying to improve detection in meson, it is simpler to
just check the __OPTIMIZE__ define from osdep.h.
The comment about being incompatible with clang appears to be
outdated, as compilation works fine without excluding clang.
In the coroutine code we must set _FORTIFY_SOURCE=0 to stop the
logic in osdep.h then enabling it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20231003091549.223020-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, a few code paths exist in the function vmstate_save_state_v,
which ultimately leads to a migration failure. However, an update in the
current MigrationState for the error description is never done.
vmstate.c somehow doesn't seem to allow the use of migrate_set_error due
to some dependencies for unit tests. Hence, this patch introduces a new
function vmstate_save_state_with_err, which will eventually propagate
the error message to savevm.c where a migrate_set_error call can be
eventually done.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-2-tejus.gk@nutanix.com>
Move the definition of VhostUserProtocolFeature to
include/hw/virtio/vhost-user.h.
Remove previous definitions in hw/scsi/vhost-user-scsi.c,
hw/virtio/vhost-user.c, and hw/virtio/virtio-qmp.c.
Previously there were 3 separate definitions of this over 3 different
files. Now only 1 definition of this will be present for these 3 files.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-vdpa net backend needs to enable vrings in a different order
than default, so export it.
No functional change intended except for tracing, that now includes the
(virtio) index being enabled and the return value of the ioctl.
Still ignoring return value of this function if called from
vhost_vdpa_dev_start, as reorganize calling code around it is out of
the scope of this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230822085330.3978829-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lots of virtio functions that are on a hot path in data transmission
are initializing indirect descriptor cache at the point of stack
allocation. It's a 112 byte structure that is getting zeroed out on
each call adding unnecessary overhead. It's going to be correctly
initialized later via special init function. The only reason to
actually initialize right away is the ability to safely destruct it.
Replacing a designated initializer with a function to only initialize
what is necessary.
Removal of the unnecessary stack initializations improves throughput
of virtio-net devices in terms of 64B packets per second by 6-14 %
depending on the case. Tested with a proposed af-xdp network backend
and a dpdk testpmd application in the guest, but should be beneficial
for other virtio devices as well.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230811143423.3258788-1-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa shadowed CVQ needs to know the maximum number of
vlans supported by the virtio-net device, so QEMU can restore
the VLAN state in a migration.
Co-developed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <ca03403319c6405ea7c400836a572255bbc9ceba.1690106284.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To use the generic device the user will need to provide the config
region size via the command line. We also add a notifier so the guest
can be pinged if the remote daemon updates the config.
With these changes:
-device vhost-user-device-pci,virtio-id=41,num_vqs=2,config_size=8
is equivalent to:
-device vhost-user-gpio-pci
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In theory we shouldn't need to repeat so much boilerplate to support
vhost-user backends. This provides a generic vhost-user-base QOM
object and a derived vhost-user-device for which the user needs to
provide the few bits of information that aren't currently provided by
the vhost-user protocol. This should provide a baseline implementation
from which the other vhost-user stub can specialise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-8-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
current code sets PCI_SEC_LATENCY_TIMER to RW, but for
pcie to pcie bridges it must be RO 0 according to
pci express spec which says:
This register does not apply to PCI Express. It must be read-only
and hardwired to 00h. For PCI Express to PCI/PCI-X Bridges, refer to the
[PCIe-to-PCI-PCI-X-Bridge] for requirements for this register.
also, fix typo in comment where it's made writeable - this typo
is likely what prevented us noticing we violate this requirement
in the 1st place.
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <de9d05366a70172e1789d10591dbe59e39c3849c.1693432039.git.mst@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that CPUNegativeOffsetState is part of CPUState,
we can reference it directly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Minimize the displacement to can_do_io, since it may
be touched at the start of each TranslationBlock.
It fits into other padding within the substructure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Verify that the distance between CPUNegativeOffsetState and
CPUArchState is no greater than any alignment requirements.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accept that we will consume space in CPUState for CONFIG_USER_ONLY,
since we cannot test CONFIG_SOFTMMU within hw/core/cpu.h.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
