FCSR is a part of F extension. Print it to log if FPU option is enabled.
Signed-off-by: Maria Klauchek <m.klauchek@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240902103433.18424-1-m.klauchek@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While the spec doesn't state it, setting timecmp to UINT64_MAX is
another way to stop a timer, as it's considered setting the next
timer event to occur at infinity. And, even if the time CSR does
eventually reach UINT64_MAX, the very next tick will bring it back to
zero, once again less than timecmp. For this reason
riscv_timer_write_timecmp() special cases UINT64_MAX. However, if a
previously set timecmp has not yet expired, then setting timecmp to
UINT64_MAX to disable / stop it would not work, as the special case
left the previous QEMU timer active, which would then still deliver
an interrupt at that previous timecmp time. Ensure the stopped timer
will not still deliver an interrupt by also deleting the QEMU timer
in the UINT64_MAX special case.
Fixes: ae0edf2188 ("target/riscv: No need to re-start QEMU timer when timecmp == UINT64_MAX")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240829084002.1805006-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Just as the hart bit setting of the AIA should be calculated as
ceil(log2(max_hart_id + 1)) the group bit setting should be
calculated as ceil(log2(max_group_id + 1)). The hart bits are
implemented by passing max_hart_id to find_last_bit() and adding
one to the result. Do the same for the group bit setting.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240821075040.498945-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The OpenTitan Ibex CPU now supports the the Zba, Zbb, Zbc
and Zbs bit-manipulation sub-extensions ratified in
v.1.0.0 of the RISC-V Bit- Manipulation ISA Extension, so let's enable
them in QEMU as well.
1: https://github.com/lowRISC/opentitan/pull/9748
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240823003231.3522113-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
za64rs requires priv 1.12 when enabled by priv 1.11.
This fixes annoying warning:
warning: disabling za64rs extension for hart 0x00000000 because privilege spec version does not match
on priv 1.11 CPUs.
Fixes: 68c9e54bea ("target/riscv: do not enable all named features by default")
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240823063431.17474-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Gitlab issue [1] reports a misleading error when trying to run a 'rv64'
cpu with 'zfinx' and without 'f':
$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false
qemu-system-riscv64: Zfinx cannot be supported together with F extension
The user explicitly disabled F and the error message mentions a conflict
with Zfinx and F.
The problem isn't the error reporting, but the logic used when applying
the implied ZFA rule that enables RVF unconditionally, without honoring
user choice (i.e. keep F disabled).
Change cpu_enable_implied_rule() to check if the user deliberately
disabled a MISA bit. In this case we shouldn't either re-enable the bit
nor apply any implied rules related to it.
After this change the error message now shows:
$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false
qemu-system-riscv64: Zfa extension requires F extension
Disabling 'zfa':
$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false,zfa=false
qemu-system-riscv64: D extension requires F extension
And finally after disabling 'd':
$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false,zfa=false,d=false
(OpenSBI boots ...)
[1] https://gitlab.com/qemu-project/qemu/-/issues/2486
Cc: Frank Chang <frank.chang@sifive.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2486
Fixes: 047da861f9 ("target/riscv: Introduce extension implied rule helpers")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240824173338.316666-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the step 5 in the process documented in bios-tables-test.c,
generate the expected ACPI SRAT AML data file for RISC-V using the
rebuild-expected-aml.sh script and update the
bios-tables-test-allowed-diff.h.
This is a new file being added for the first time. Hence, iASL diff
output is not added.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a667480203b35508038176c8ce4722370294cc57.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add ACPI SRAT table test case for RISC-V when NUMA was enabled.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a6f7e1a4b20ff7eb199e94ca0c8aa2e6794ce5b2.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per process documented (steps 1-3) in bios-tables-test.c, add
empty AML data file for RISC-V ACPI SRAT table and add the entry
in bios-tables-test-allowed-diff.h.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <0e30216273f2f59916bc651350578d8e8bc3a75f.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVV spec allows implementations to set vl with values within
[ceil(AVL/2),VLMAX] when VLMAX < AVL < 2*VLMAX. This commit adds a
property "rvv_vl_half_avl" to enable setting vl = ceil(AVL/2). This
behavior helps identify compiler issues and bugs.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20240722175004.23666-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove some defines and enums that are OMAP2 specific and
no longer used anywhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-54-peter.maydell@linaro.org
The omap_dma4 device was only used in the OMAP2 SoC, which has
been removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-53-peter.maydell@linaro.org
The omap_l4 device is OMAP2 only, so we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-51-peter.maydell@linaro.org
The omap_tap device is OMAP2 only, and we are removing it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-49-peter.maydell@linaro.org
Remove the omap_synctimer device, which is only in the OMAP2 SoC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-46-peter.maydell@linaro.org
The omap_gptimer device is only in the OMAP2 SoC, which we
are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-45-peter.maydell@linaro.org
The omap_gpmc device is only in OMAP2, which we are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-44-peter.maydell@linaro.org
The omap_sdrc device is only in OMAP2, which we are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-43-peter.maydell@linaro.org
Remove the OMAP2 specific code from omap_mmc.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-42-peter.maydell@linaro.org
Remove the OMAP2 specific code from omap_uart.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-40-peter.maydell@linaro.org
We've removed the OMAP2 SoC, so we can remove the OMAP2 GPIO
device. (The source file remains, as it also has the model of
the OMAP1 GPIO device.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-39-peter.maydell@linaro.org
The users of the OMAP2 SoC emulation have been removed, so we can
delete omap2.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-38-peter.maydell@linaro.org
Now we have removed all the board types that it covers, we can move
the text about old Arm boards from deprecated.rst to
removed-features.rst, tweaking it appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-37-peter.maydell@linaro.org
Remove the MUSB USB2.0 OTG-compliant USB host controller
device model. This was only used by the tusb6010 USB
controller in the n800/n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-35-peter.maydell@linaro.org
The tusb6010 was only used by the n800/n810 machines, so it
can be removed now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-34-peter.maydell@linaro.org
The OneNAND devices were only used by n800/n810, so they
can be removed now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-33-peter.maydell@linaro.org
Remove the lm832x keyboard-and-pwm i2c device model. This
was only used by the n800 and n810 machines.
(Although this is an i2c device and so in theory available to create
on the command line, in practice it has an outbound IRQ line that the
machine model needs to wire up, and the only way to inject keys events
into it is to call the lm832x_key_event() function, so it isn't
in practice possible to use it separately from the n800/n810.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-32-peter.maydell@linaro.org
Remove the TWL92230 RTC device, which was used only by the n800 and n810.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-31-peter.maydell@linaro.org
Remove the tsc210x touchscreen controller device, which was
only used by the n800 and n810 and cheetah.
The uWireSlave struct is still used in omap1.c (at least for
compilation purposes -- nothing any longer calls omap_uwire_attach()
and so the struct's members will not be used at runtime), so
we move it into omap.h so we can delete tsc2xxx.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-30-peter.maydell@linaro.org
Remove the tsc2005 touchscreen controller, which was only used
by the n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-29-peter.maydell@linaro.org
Remove the blizzard display device, which was only used with the
n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-28-peter.maydell@linaro.org
The devices in hw/misc/cbus.c were used only by the
now-removed nseries machine types, so they can be removed.
As this is the last use of the CONFIG_NSERIES define we
can remove that from KConfig now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-27-peter.maydell@linaro.org
Remove the 'n800' and 'n810' machine types, which modelled
Nokia internet tablets. These were deprecated in 9.0 and
so we can remove them for 9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-26-peter.maydell@linaro.org
[PMM: added removal of arm-n800-machine.c post-review]
The pxa27x-timer can be removed now we have removed the PXA2xx
SoC models. The pxa25x-timer device must remain as it is still
used by strongarm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-24-peter.maydell@linaro.org
Remove the pxa2xx-specific interrupt controller device.
As this is the last user of the pxa.h header file and the
CONFIG_PXA2XX define we can remove those too.
This completes the removal of the pxa2xx specific code. We leave:
* pxa2xx_timer -- still used by the Collie board (strongarm)
* the definitions of the CPUs themselves in target/arm
(still usable by linux-user mode)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-23-peter.maydell@linaro.org
Remove the pxa2xx-specific GPIO device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-22-peter.maydell@linaro.org
Remove the pxa2xx specific pcmcia device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-21-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_dma device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-20-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_keypad device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-18-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_mmci device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-17-peter.maydell@linaro.org
All the callers of pxa270_init() and pxa255_init() have now been removed,
so we can remove pxa2xx.c. This also removes the only uses of a lot of
pxa2xx specific devices, which will be removed in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-16-peter.maydell@linaro.org
pxa2xx_timer includes pxa.h, but it doesn't actually make
use of any of the #defines, function prototypes or structs
defined there. Remove the unnecessary include (we will
shortly be removing the whole header file).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-15-peter.maydell@linaro.org
Currently the STRONGARM KConfig symbol pulls in PXA2XX. Since we've now
removed all the true uses of PXA2XX, we'd like to remove the PXA2XX
symbol too. To permit that, make STRONGARM directly select the things
it truly depends on:
* pxa25x-timer
* SSI
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-14-peter.maydell@linaro.org
The 'z2' machine was deprecated in 9.0, so we can remove it for
9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-13-peter.maydell@linaro.org
