compatiblity -> compatibility
continously -> continuously
existance -> existence
usefull -> useful
shoudl -> should
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Or, partially. The fundamental primitives for the port are gen_load_mem
and gen_store_mem, which take a callback to emit the memory operation.
For that, we continue to use the original inline functions that forward
to the new ops, rather than replicate the same thing privately.
That said, all free-standing calls to tcg_gen_qemu_* have been converted.
The 32-bit floating-point references now use _i32 opcodes, eliminating
a truncate or extension.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows significantly more threading, and occasionally larger TBs,
when processing code for the kernel and PALcode.
Signed-off-by: Richard Henderson <rth@twiddle.net>
With appropriate flushing when the PALBR changes, the target of
a CALL_PAL is so predictable we can chain to it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The destination of the call_pal, and the cpu state, is very predictable;
there's no need for exiting the cpu loop.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Basing the alarm off the rtc_clock was silly. It leads to horrible
spinning in the guest after being suspended and resumed, as it tries
to catch up with lost ticks.
This requires adding an accessor for reading the vm_clock too.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Also use bool argument while at it.
Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make TYPE_ALPHA_CPU abstract and add types <name>-alpha-cpu.
Use type inheritence, and turn "2*" models into aliases.
Move cpu_alpha_init() to cpu.c and split out CPU realization.
Default to creating type "ev67-alpha-cpu" as before.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Replace cpu_init() macro with inline function for backwards
compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For proper cmov insns, as well as the non-goto-tb case
of conditional branch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Save the cpu_model_str so that we have a non-null value when
creating a new cpu during clone.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This softfp feature post-dates the last major update to the Alpha
fpu translation. We can make use of this to eliminate at least
one helper function that was performing this operation by hand.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This completes the transition away from AREG0. This patch must
be last because it requires CONFIG_TCG_PASS_AREG0 set too.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
sed -i "s/CPUState/CPUAlphaState/g" target-alpha/*.[hc]
sed -i "s/#define CPUAlphaState/#define CPUState/" target-alpha/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
The change in cpu.h is needed when HOST_LONG_BITS is defined in qemu-common.h.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The alarm is a fully general one-shot time comparator, which will be
usable under Linux as a hrtimer source. It's much more flexible than
the RTC source available on real hardware.
The wall clock allows the guest access to the host timekeeping. Much
like the KVM wall clock source for other guests.
Both are accessed via the PALcode Cserve entry point.
Signed-off-by: Richard Henderson <rth@twiddle.net>
In particular, SWPIPL is used quite a lot by the Linux kernel.
Doing this inline makes it significantly easier to step through
without the debugger getting confused by the mode switch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We had two different methods in use, both of which referenced ENV,
and neither of which indicated to the generic code when different
compilation modes are not compatible.
Signed-off-by: Richard Henderson <rth@twiddle.net>
These aren't actually used yet, but we can at least access
them via the HW_MFPR and HW_MTPR instructions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The EXC_M_* constants were being set for the EV6, not as set for
the Unix kernel entry point.
Use PS_USER_MODE instead of hard-coding access to the PS register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
There's no need to attempt to match EXCP_* values with PALcode entry
point offsets. Instead, compress all the values to make for more
efficient switch statements within QEMU.
We will be doing TLB fill within QEMU proper, not within the PALcode,
so all of the ITB/DTB miss, double fault, and access exceptions can
be compressed to EXCP_MMFAULT.
Compress all of the EXCP_CALL_PAL exceptions into one.
Use env->error_code to store the specific entry point.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Delete all the code that tried to emulate the real IPRs of some
unnamed CPU. Replace those with just 3 slots that we can use to
communicate trap information between the helper functions that
signal exceptions and the OS trap handler.
Signed-off-by: Richard Henderson <rth@twiddle.net>
All of the "raw" memory accesses should be "phys" instead. Fix
some confusion about argument ordering of the store routines.
Fix the implementation of store-conditional.
Delete the "alt-mode" helpers. Because we only implement two
mmu modes, let /a imply user-mode unconditionally.
Leave some combinations of virt access without permission
checks as unimplemented. There are too many hoops through
which to jump, and these insns will not be needed in the
emulation palcode.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We were failing to generate EXC_DEBUG in the EXIT_PC_UPDATED path.
This caused us not to stop at the instruction after a branch, but
on the instruction afterward.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Function gen_pc_load was introduced in commit
d2856f1ad4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.
Parameter puc was needed by target-sparc until
commit d7da2a1040.
Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.
As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.
v2: Remove last parameter, too, and rename the function.
v3: Fix [] typo in target-arm/translate.c.
Fix wrong SHA1 object name in commit message (copy+paste error).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use an exception plus start_exclusive to implement the compare-and-swap.
This follows the example set by the MIPS and PPC ports.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When (indirectly) calling raise_exception, don't emit cleanup
code at the end of the TB, as it is unused.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use an ExitStatus enumeration instead of magic numbers as the return
value from translate_one. Emit goto_tb opcodes when ending a TB via
a direct branch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a per-cpu flag; there's no need for a spinlock of any kind.
We were also failing to manipulate the flag with $31 as a target reg
and failing to clear the flag on execution of a return-from-interrupt
instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The inverted conditions as argument to the function looks wrong
at a glance inside translate_one. Since we have an easy function
to produce the inversion now, use it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It's a simple mask and shift sequence.
Also, fix a typo in the actual masks used.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
IEEE FP instructions are split up so that the rounding mode
coming from the instruction and exceptions (both masking and
delivery) are handled external to the base FP operation.
FP exceptions are properly raised for non-finite inputs to
instructions that do not indicate software completion.
A shortcut is applied if CONFIG_SOFTFLOAT_INLINE is defined
at the top of translate.c: data is loaded and stored into
FP_STATUS directly instead of using the functional interface
defined by "softfloat.h".
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The existing set of IPRs is totally irrelevant to user-mode emulation.
Indeed, they most are irrelevant to implementing kernel-mode emulation,
and would only be relevant to PAL-mode emulation, which I suspect that
no one will ever attempt.
Reducing the set of processor registers reduces the size of the CPU state.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Linux, at least, disables exceptions by default.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The old fcmov implementation had a typo:
- tcg_gen_mov_i64(cpu_fir[rc], cpu_fir[ra]);
which moved the condition, not the second source, to the destination.
But it's also easy to implement the simplified fp comparison inline.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Similar in difficulty to ext*l, already expanded.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Similar in difficulty to ext*l, already expanded.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When emulating user-mode only, there's no reason to exit
the translation block to effect a call_pal. We can generate
a move to/from the unique slot directly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The instructions use a disp21 like all other branch insns,
not the disp16 that was being passed.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The architecture manual specifies the EXT instructions
in terms of the ZAPNOT operation; writing it that way in
the translator makes things a bit clearer.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The vast majority of zap instructions have an immediate operand,
since zapnot is the canonical method to zero-extend from u16 or u32.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Generic disassembly was incorrectly keyed on ALPHA_DEBUG_DISAS
rather than the generic DEBUG_DISAS. Use qemu_log_mask for
additional LOG_DISAS output. Delete some random insn_count
logging noise from gen_intermediate_code_internal.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
