Using a register array will allow us to represent old-mode and new-mode
I2C registers by using the same underlying register array, instead of
adding an entire new set of variables to represent new mode.
As part of this, we also do additional cleanup to use ARRAY_FIELD_
macros instead of FIELD_ macros on registers.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: Ib94996b17c361b8490c042b43c99d8abc69332e3
[ clg: use of memset in aspeed_i2c_bus_reset() ]
Message-Id: <20220331043248.2237838-5-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This cleans up some of the field accessing, setting, and clearing
bitwise operations, and wraps them in macros instead.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: I33018d6325fa04376e7c29dc4a49ab389a8e333a
Message-Id: <20220331043248.2237838-4-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The board has no such device. It might have been useful for some tests
in the past, it's not anymore and the same can be achieved on the
command line.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The DEFINE_PROP* macros in pnv files are using extra spaces for no good
reason.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220602215351.149910-1-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When accessing a thread context through the IC BAR, the offset of the
page in the BAR identifies the CPU. From that offset, we can compute
the PIR (processor ID register) of the CPU to do the data structure
lookup. On P10, the current code assumes an access for node 0 when
computing the PIR. Everything is almost in place to allow access for
other nodes though. So this patch reworks how the PIR value is
computed so that we can access all thread contexts through the IC BAR.
The PIR is already correct on P9, so no need to modify anything there.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220602165310.558810-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Recent changes to pcie_host corrected size of its internal region to
match what it expects: only the low 28 bits are ever decoded. Previous
code just ignored bit 29 (if size was 1 << 29) in the address which does
not make much sense. We are now asserting on size > 1 << 28 instead,
but PPC 4xx actually allows guest to configure different sizes, and some
firmwares seem to set it to 1 << 29.
This caused e.g. qemu-system-ppc -M sam460ex to exit with an assert when
the guest writes a value to CFGMSK register when trying to map config
space. This is done in the board firmware in ppc4xx_init_pcie_port() in
roms/u-boot-sam460ex/arch/powerpc/cpu/ppc4xx/4xx_pcie.c
It's not clear what the proper fix should be but for now let's force the
size to 256MB, so anything outside the expected address range is
ignored.
Fixes: commit 1f1a7b2269 ("include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220526224229.95183-1-mst@redhat.com>
[danielhb: changed commit msg as BALATON Zoltan suggested]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
more CXL patches
RSA support for crypto
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKrYLMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpwpwH/2IS+V7wS3q/XXPz1HndJLpUP/z+mkeu9W6+
X1U9CJ+66Ag4eD5T/jzoN0JEjiTeET/3xM+PY5NYZCh6QTAmA7EfFZv99oNWpGd1
+nyxOdaMDPSscOKjLfDziVTi/QYIZBtU6TeixL9whkipYCqmgbs5gXV8ynltmKyF
bIJVeaXm5yQLcCTGzKzdXf+HmTErpEGDCDHFjzrLVjICRDdekElGVwYTn+ycl7p7
oLsWWVDgqo0p86BITlrHUXUrxTXF3wyg2B59cT7Ilbb3o+Fa2GsP+o9IXMuVoNNp
A+zrq1QZ49UO3XwkS03xDDioUQ1T/V0L4w9dEfaGvpY4Horv0HI=
=PvmT
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
RSA support for crypto
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKrYLMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpwpwH/2IS+V7wS3q/XXPz1HndJLpUP/z+mkeu9W6+
# X1U9CJ+66Ag4eD5T/jzoN0JEjiTeET/3xM+PY5NYZCh6QTAmA7EfFZv99oNWpGd1
# +nyxOdaMDPSscOKjLfDziVTi/QYIZBtU6TeixL9whkipYCqmgbs5gXV8ynltmKyF
# bIJVeaXm5yQLcCTGzKzdXf+HmTErpEGDCDHFjzrLVjICRDdekElGVwYTn+ycl7p7
# oLsWWVDgqo0p86BITlrHUXUrxTXF3wyg2B59cT7Ilbb3o+Fa2GsP+o9IXMuVoNNp
# A+zrq1QZ49UO3XwkS03xDDioUQ1T/V0L4w9dEfaGvpY4Horv0HI=
# =PvmT
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jun 2022 09:56:19 AM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
acpi/erst: fix fallthrough code upon validation failure
vhost: also check queue state in the vhost_dev_set_log error routine
crypto: Introduce RSA algorithm
virtio-iommu: Add an assert check in translate routine
virtio-iommu: Use recursive lock to avoid deadlock
virtio-iommu: Add bypass mode support to assigned device
virtio/vhost-user: Fix wrong vhost notifier GPtrArray size
docs/cxl: Add switch documentation
pci-bridge/cxl_downstream: Add a CXL switch downstream port
pci-bridge/cxl_upstream: Add a CXL switch upstream port
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At any step when any validation fail in check_erst_backend_storage(), there is
no need to continue further through other validation checks. Further, by
continuing even when record_size is 0, we run the risk of triggering a divide
by zero error if we continued with other validation checks. Hence, we should
simply return from this function upon validation failure.
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220513141005.1929422-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
When check queue state in the vhost_dev_set_log routine, it miss the error
routine check, this patch also check queue state in error case.
Fixes: 1e5a050f57 ("check queue state in the vhost_dev_set_log routine")
Signed-off-by: Ni Xun <richardni@tencent.com>
Reviewed-by: Zhigang Lu <tonnylu@tencent.com>
Message-Id: <OS0PR01MB57139163F3F3955960675B52EAA79@OS0PR01MB5713.jpnprd01.prod.outlook.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two parts in this patch:
1, support akcipher service by cryptodev-builtin driver
2, virtio-crypto driver supports akcipher service
In principle, we should separate this into two patches, to avoid
compiling error, merge them into one.
Then virtio-crypto gets request from guest side, and forwards the
request to builtin driver to handle it.
Test with a guest linux:
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
All the cases work fine.
Run script in guest:
rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=20
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: lei he <helei.sig11@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With address space switch supported, dma access translation only
happen after endpoint is attached to a non-bypass domain.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-4-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When switching address space with mutex lock hold, mapping will be
replayed for assigned device. This will trigger relock deadlock.
Also release the mutex resource in unrealize routine.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently assigned devices can not work in virtio-iommu bypass mode.
Guest driver fails to probe the device due to DMA failure. And the
reason is because of lacking GPA -> HPA mappings when VM is created.
Add a root container memory region to hold both bypass memory region
and iommu memory region, so the switch between them is supported
just like the implementation in virtual VT-d.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In fetch_or_create_notifier, idx begins with 0. So the GPtrArray size
should be idx + 1 and g_ptr_array_set_size should be called with idx + 1.
This wrong GPtrArray size causes fetch_or_create_notifier return an invalid
address. Passing this invalid pointer to vhost_user_host_notifier_remove
causes assert fail:
qemu/include/qemu/int128.h:27: int128_get64: Assertion `r == a' failed.
shutting down, reason=crashed
Backends like dpdk-vdpa which sends out vhost notifier requests almost always
hit qemu crash.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers")
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Change-Id: I87e0f7591ca9a59d210879b260704a2d9e9d6bcd
Message-Id: <20220526034851.683258-1-yajunw@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Emulation of a simple CXL Switch downstream port.
The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-3-Jonathan.Cameron@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
An initial simple upstream port emulation to allow the creation
of CXL switches. The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Actual fix is patch 5, whereas patch 4 being preparatory, all other
patches are test cases to guard this Twalk issue.
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmKrDSAXHHFlbXVfb3Nz
QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5VgoQ//bA/lXYa6hds4f73+opq7iiJ/
88gnJO8uPctNWXJ5f6ufXcTFtC99QRcl97jgSQhSIUdaZCfcpg7Pq3fONc060cMt
MNxi5Da31Fq7xz4UhSQHgWlgAfomfClYoBSOtrrxjVbXChA2rB7FXhD9aewimUtt
TlolXdJuPbGR3F6H0glN1itij12Ay5c0DMqFPy5npYlzjNhxmPb8QgFZ8E+lxhcT
hG+OMmS9O5Mk7WKYWC1Iij7tWm45RbThPEUsfCPt6jIJYQqheOQs0ohJG9wyCZu3
JUCgSBPG1nNY0hgBJ/X7un7e89BoRw8edwqP+sSigfDf+LquUggqRFgz+joTbfvj
Prq+1NTDIckDRZF6CDUSkZE3+Gq3qlIhw/2vS+bjYZrk04lP4x8d9JYPSkT3i8xc
+YT/apDUkT68FjJ6PudfS2j6xRtYt86nOuWuhYukTZ2z5FJ0c9XAJlJX2ZS9Az3n
AqKFCT+8UE4VYKnAJ61xDdqvAdEmKJUi5YutfuwH+j6sS4peLX0gg8mGlNi7y8JK
bsqNjE1ve8rkp24DuUoHmivs/m1ogJi9Jxp5IjB4d26MPhgojrxOpaYUVg98QS7d
os2ES47CSn4KFxqsFMZnZpgzKxIvRQ4C9bBbSClDOffHWHRJub6PCw5F9eCTH4dO
z/QPJ+smDY7bolF+gSg=
=3ejn
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20220616' of https://github.com/cschoenebeck/qemu into staging
9pfs: fix 'Twalk' protocol violation
Actual fix is patch 5, whereas patch 4 being preparatory, all other
patches are test cases to guard this Twalk issue.
# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmKrDSAXHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5VgoQ//bA/lXYa6hds4f73+opq7iiJ/
# 88gnJO8uPctNWXJ5f6ufXcTFtC99QRcl97jgSQhSIUdaZCfcpg7Pq3fONc060cMt
# MNxi5Da31Fq7xz4UhSQHgWlgAfomfClYoBSOtrrxjVbXChA2rB7FXhD9aewimUtt
# TlolXdJuPbGR3F6H0glN1itij12Ay5c0DMqFPy5npYlzjNhxmPb8QgFZ8E+lxhcT
# hG+OMmS9O5Mk7WKYWC1Iij7tWm45RbThPEUsfCPt6jIJYQqheOQs0ohJG9wyCZu3
# JUCgSBPG1nNY0hgBJ/X7un7e89BoRw8edwqP+sSigfDf+LquUggqRFgz+joTbfvj
# Prq+1NTDIckDRZF6CDUSkZE3+Gq3qlIhw/2vS+bjYZrk04lP4x8d9JYPSkT3i8xc
# +YT/apDUkT68FjJ6PudfS2j6xRtYt86nOuWuhYukTZ2z5FJ0c9XAJlJX2ZS9Az3n
# AqKFCT+8UE4VYKnAJ61xDdqvAdEmKJUi5YutfuwH+j6sS4peLX0gg8mGlNi7y8JK
# bsqNjE1ve8rkp24DuUoHmivs/m1ogJi9Jxp5IjB4d26MPhgojrxOpaYUVg98QS7d
# os2ES47CSn4KFxqsFMZnZpgzKxIvRQ4C9bBbSClDOffHWHRJub6PCw5F9eCTH4dO
# z/QPJ+smDY7bolF+gSg=
# =3ejn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jun 2022 03:59:44 AM PDT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20220616' of https://github.com/cschoenebeck/qemu:
tests/9pfs: check fid being unaffected in fs_walk_2nd_nonexistent
tests/9pfs: guard recent 'Twalk' behaviour fix
9pfs: fix 'Twalk' to only send error if no component walked
9pfs: refactor 'name_idx' -> 'nwalked' in v9fs_walk()
tests/9pfs: compare QIDs in fs_walk_none() test
tests/9pfs: Twalk with nwname=0
tests/9pfs: walk to non-existent dir
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
=Dxwa
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* statistics subsystem
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
# VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
# pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
# CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
# cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
# v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
# =Dxwa
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 02:12:36 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
build: include pc-bios/ part in the ROMS variable
meson: put cross compiler info in a separate section
q35：Enable TSEG only when G_SMRAME and TSEG_EN both enabled
build: fix check for -fsanitize-coverage-allowlist
tests/vm: allow running tests in an unconfigured source tree
configure: cleanup -fno-pie detection
configure: update list of preserved environment variables
virtio-mmio: cleanup reset
virtio: stop ioeventfd on reset
virtio-mmio: stop ioeventfd on legacy reset
s390x: simplify virtio_ccw_reset_virtio
block: add more commands to preconfig mode
hmp: add filtering of statistics by name
qmp: add filtering of statistics by name
hmp: add filtering of statistics by provider
qmp: add filtering of statistics by provider
hmp: add basic "info stats" implementation
cutils: add functions for IEC and SI prefixes
qmp: add filtering of statistics by target vCPU
kvm: Support for querying fd-based stats
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Current implementation of 'Twalk' request handling always sends an 'Rerror'
response if any error occured. The 9p2000 protocol spec says though:
"
If the first element cannot be walked for any reason, Rerror is returned.
Otherwise, the walk will return an Rwalk message containing nwqid qids
corresponding, in order, to the files that are visited by the nwqid
successful elementwise walks; nwqid is therefore either nwname or the index
of the first elementwise walk that failed.
"
http://ericvh.github.io/9p-rfc/rfc9p2000.html#anchor33
For that reason we are no longer leaving from an error path in function
v9fs_walk(), unless really no path component could be walked successfully or
if the request has been interrupted.
Local variable 'nwalked' counts and reflects the number of path components
successfully processed by background I/O thread, whereas local variable
'name_idx' subsequently counts and reflects the number of path components
eventually accepted successfully by 9p server controller portion.
New local variable 'any_err' is an aggregate variable reflecting whether any
error occurred at all, while already existing variable 'err' only reflects
the last error.
Despite QIDs being delivered to client in a more relaxed way now, it is
important to note though that fid still must remain unaffected if any error
occurred.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <bc73e24258a75dc29458024c7936c8a036c3eac5.1647339025.git.qemu_oss@crudebyte.com>
The local variable 'name_idx' is used in two loops in function v9fs_walk().
Let the first loop use its own variable 'nwalked' instead, which we will
use in subsequent patch as the number of (requested) path components
successfully walked by background I/O thread.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <d506308e7e343023c4db95d0e6053dd2627ed3c1.1647339025.git.qemu_oss@crudebyte.com>
Adds handler to reset a remote device
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 112eeadf3bc4c6cdb100bc3f9a6fcfc20b467c1b.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Forward remote device's interrupts to the guest
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Message-id: 9523479eaafe050677f4de2af5dd0df18c27cfd9.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Determine the BARs used by the PCI device and register handlers to
manage the access to the same.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 3373e10b5be5f42846f0632d4382466e1698c505.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define and register callbacks to manage the RAM regions used for
device DMA
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: faacbcd45c4d02c591f0dbfdc19041fbb3eae7eb.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Assign separate address space for each device in the remote processes.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: afe0b0a97582cdad42b5b25636a29c523265a10a.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define and register handlers for PCI config space accesses
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: be9d2ccf9b1d24e50dcd9c23404dbf284142cec7.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Setup a handler to run vfio-user context. The context is driven by
messages to the file descriptor associated with it - get the fd for
the context and hook up the handler with it
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: e934b0090529d448b6a7972b21dfc3d7421ce494.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Find the PCI device with specified id. Initialize the device context
with the QEMU PCI device
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7798dbd730099b33fdd00c4c202cfe79e5c5c151.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
create a context with the vfio-user library to run a PCI device
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: a452871ac8c812ff96fc4f0ce6037f4769953fab.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define vfio-user object which is remote process server for QEMU. Setup
object initialization functions and properties necessary to instantiate
the object
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: e45a17001e9b38f451543a664ababdf860e5f2f2.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
add the libvfio-user library as a submodule. build it as a meson
subproject.
libvfio-user is distributed with BSD 3-Clause license and
json-c with MIT (Expat) license
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c2adec87958b081d1dc8775d4aa05c897912f025.1655151679.git.jag.raman@oracle.com
[Changed submodule URL to QEMU's libvfio-user mirror on GitLab. The QEMU
project mirrors its dependencies so that it can provide full source code
even in the event that its dependencies become unavailable. Note that
the mirror repo is manually updated, so please contact me to make newer
libvfio-user commits available. If I become a bottleneck we can set up a
cronjob.
Updated scripts/meson-buildoptions.sh to match the meson_options.txt
change. Failure to do so can result in scripts/meson-buildoptions.sh
being modified by the build system later on and you end up with a dirty
working tree.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add vfio-user to x-remote machine. It is a boolean, which indicates if
the machine supports vfio-user protocol. The machine configures the bus
differently vfio-user and multiprocess protocols, so this property
informs it on how to configure the bus.
This property should be short lived. Once vfio-user fully replaces
multiprocess, this property could be removed.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 5d51a152a419cbda35d070b8e49b772b60a7230a.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow hotplugging of PCI(e) devices to remote machine
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d1e6cfa0afb528ad343758f9b1d918be0175c5e5.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add blocker to prevent hot-unplug of devices
TYPE_VFIO_USER_SERVER, which is introduced shortly, attaches itself to a
PCIDevice on which it depends. If the attached PCIDevice gets removed
while the server in use, it could cause it crash. To prevent this,
TYPE_VFIO_USER_SERVER adds an unplug blocker for the PCIDevice.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c41ef80b7cc063314d629737bed2159e5713f2e0.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
According to spec:
"TSEG Enable (T_EN): Enabling of SMRAM memory for Extended SMRAM space
only. When G_SMRAME = 1 and TSEG_EN = 1, the TSEG is enabled to appear
in the appropriate physical address space. Note that once D_LCK is set,
this bit becomes read only."
Changed to match the spec description.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220615034501.2733802-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make virtio_mmio_soft_reset reset the virtio device, which is performed by
both the "soft" and the "hard" reset; and then call virtio_mmio_soft_reset
from virtio_mmio_reset to emphasize that the latter is a superset of the
former.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All calls to virtio_bus_reset are preceded by virtio_bus_stop_ioeventfd,
move the call in virtio_bus_reset: that makes sense and clarifies
that the vdc->reset function is called with ioeventfd already stopped.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the queue PFN is set to zero on a virtio-mmio device, the device is reset.
In that case however the virtio_bus_stop_ioeventfd function was not
called; add it so that the behavior is similar to when status is set to 0.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call virtio_bus_reset instead of virtio_reset, so that the function
need not receive the VirtIODevice.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change adds a new member, refresh_rate to QemuUIInfo in
include/ui/console.h. It represents the refresh rate of the
physical display backend, and it is more appropriate than
GUI update interval as the refresh rate which the emulated device
reports:
- sdl may set GUI update interval shorter than the refresh rate
of the physical display to respond to user-generated events.
- sdl and vnc aggressively changes GUI update interval, but
a guests is typically not designed to respond to frequent
refresh rate changes, or frequent "display mode" changes in
general. The frequency of refresh rate changes of the physical
display backend matches better to the guest's expectation.
QemuUIInfo also has other members representing "display mode",
which makes it suitable for refresh rate representation. It has
a throttling of update notifications, and prevents frequent changes
of the display mode.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-3-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The returned value is not used and misleading.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It only needs to update the scanouts containing the rect area
coming with the resource-flush request from the guest.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20220505214030.4261-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When launching QEMU with "-loadvm", usbredir_create_parser() should avoid
setting up the hello packet (just as with "-incoming". On the latest version
of libusbredir, usbredirparser_unserialize() will return error if the parser
is not "pristine."
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20220507041850.98716-1-j@getutm.app>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'active' bit passes control over a qTD between the guest and the
controller: set to 1 by guest to enable execution by the controller,
and the controller sets it to '0' to hand back control to the guest.
ehci_state_writeback write two dwords to main memory using DMA:
the third dword of the qTD (containing dt, total bytes to transfer,
cpage, cerr and status) and the fourth dword of the qTD (containing
the offset).
This commit makes sure the fourth dword is written before the third,
avoiding a race condition where a new offset written into the qTD
by the guest after it observed the status going to go to '0' gets
overwritten by a 'late' DMA writeback of the previous offset.
This race condition could lead to 'cpage out of range (5)' errors,
and reproduced by:
./qemu-system-x86_64 -enable-kvm -bios $SEABIOS/bios.bin -m 4096 -device usb-ehci -blockdev driver=file,read-only=on,filename=/home/aengelen/Downloads/openSUSE-Tumbleweed-DVD-i586-Snapshot20220428-Media.iso,node-name=iso -device usb-storage,drive=iso,bootindex=0 -chardev pipe,id=shell,path=/tmp/pipe -device virtio-serial -device virtconsole,chardev=shell -device virtio-rng-pci -serial mon:stdio -nographic
(press a key, select 'Installation' (2), and accept the default
values. On my machine the 'cpage out of range' is reproduced while
loading the Linux Kernel about once per 7 attempts. With the fix in
this commit it no longer fails)
This problem was previously reported as a seabios problem in
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/OUTHT5ISSQJGXPNTUPY3O5E5EPZJCHM3/
and as a nixos CI build failure in
https://github.com/NixOS/nixpkgs/issues/170803
Signed-off-by: Arnout Engelen <arnout@bzzt.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit added a new emulated device called CanoKey to QEMU.
CanoKey implements platform independent features in canokey-core
https://github.com/canokeys/canokey-core, and leaves the USB implementation
to the platform.
In this commit the USB part was implemented in QEMU using QEMU's USB APIs,
therefore the emulated CanoKey can communicate with the guest OS using USB.
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <YoY6Mgph6f6Hc/zI@Sun>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes compilation due to false positives with -Werror:
In file included from /usr/include/glib-2.0/glib.h:114,
from qemu/src/include/glib-compat.h:32,
from qemu/src/include/qemu/osdep.h:144,
from ../src/hw/mips/boston.c:20:
In function ‘g_autoptr_cleanup_generic_gfree’,
inlined from ‘boston_mach_init’ at ../src/hw/mips/boston.c:790:52:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘dtb_load_data’ may be used uninitialized [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/mips/boston.c: In function ‘boston_mach_init’:
../src/hw/mips/boston.c:790:52: note: ‘dtb_load_data’ was declared here
790 | g_autofree const void *dtb_file_data, *dtb_load_data;
| ^~~~~~~~~~~~~
In function ‘g_autoptr_cleanup_generic_gfree’,
inlined from ‘boston_mach_init’ at ../src/hw/mips/boston.c:790:36:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘dtb_file_data’ may be used uninitialized [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/mips/boston.c: In function ‘boston_mach_init’:
../src/hw/mips/boston.c:790:36: note: ‘dtb_file_data’ was declared here
790 | g_autofree const void *dtb_file_data, *dtb_load_data;
| ^~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220605151908.30566-1-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
etsec_create() wraps qdev API which is outdated. It is also unused,
so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The macro seems to be used only internally, so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-4-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The tables contain spcifically crafted constants for algorithms, so make
them immutable.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
TYPE_I8042 is exported, so reuse it for consistency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Exposing the io_base offset as a QOM property not only allows it to be
configurable but also to be displayed in HMP:
Before:
(qemu) info qtree
...
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
irq = 8 (0x8)
lost_tick_policy = "discard"
After:
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
iobase = 112 (0x70)
irq = 8 (0x8)
lost_tick_policy = "discard"
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220529184006.10712-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since commit 3b004a1654 'hw/rtc/
mc146818rtc: QOM'ify IRQ number' mc146818rtc's IRQ number is
configurable. Fix microvm-dt to respect its value.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220529184006.10712-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
New code will be added where this is best practice. So update existing code
as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220529184006.10712-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
During the previous changesets piix3_create() became a trivial
wrapper around more generic functions. Modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-12-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-11-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
PCI interrupt wiring was performed in create() functions which are
obsolete. Move these tasks into QOM functions to modernize the code.
In order to avoid duplicate checking for xen_enabled() the realize
methods are now split.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-10-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The pci_map_irq_fn was implemented below type_init() which made it
inaccessible to QOM functions. So move it up.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
During the previous changesets piix4_create() became a trivial
wrapper around more generic functions. Modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Just like the real hardware, create the PIIX4 ACPI controller as part of
the PIIX4 southbridge. This also mirrors how the IDE and USB functions
are already created.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-7-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
PCI interrupt wiring and device creation were performed in create()
functions which are obsolete. Move these tasks into QOM functions to
modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The pci_map_irq_fn was implemented below type_init() which made it
inaccessible to QOM functions. So move it up.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
TYPE_PIIX3_PCI_DEVICE resides there as already, so add the remaining
ones, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This function is now unused and so can be completely removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM
device can be instantiated directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-12-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM
device can be instantiated directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-11-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Initialize the SMI IRQ in piix4_pm_init().
The smi_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-10-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce piix4_pm_init() instance init function and use it to
initialise the separate qdev gpio for the SCI IRQ.
The sci_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-9-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy
piix4_pm_init() wrapper function. Eventually the wrapper function will be
removed, but for now rename it to piix4_pm_initfn() to avoid a naming
collision.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This exposes the PIIX4_PM device to the caller to allow any qdev gpios to be
mapped outside of piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the QOM types in hw/acpi/piix4.c to be used elsewhere by simply including
hw/acpi/piix4.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the smm_enabled value to be set using a standard qdev property instead
of being referenced directly in piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is in preparation for conversion to a qdev property.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-3-mark.cave-ayland@ilande.co.uk>
[PMD: Change simm_enabled from int to bool, suggested by Ani Sinha]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This logic can be included as part of piix4_pm_realize() and does not need to
be handled externally.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sysbus floppy controllers (devices sysbus-fdc and sun-fdtwo)
don't support DMA. The core floppy controller code expects this to
be indicated by setting FDCtrl::dma_chann to -1. This used to be
done in the device instance_init functions sysbus_fdc_initfn() and
sun4m_fdc_initfn(), but in commit 1430759ec3 we refactored this code
and accidentally lost the setting of dma_chann.
For sysbus-fdc this has no ill effects because we were redundantly
also setting dma_chann in fdctrl_init_sysbus(), but for sun-fdtwo
this means that guests which try to enable DMA on the floppy
controller will cause QEMU to crash because FDCtrl::dma is NULL.
Set dma_chann to -1 in the common instance init, and remove the
redundant code in fdctrl_init_sysbus() that is also setting it.
There is a six-year-old FIXME comment in the jazz board code to the
effect that in theory it should support doing DMA via a custom DMA
controller. If anybody ever chooses to fix that they can do it by
adding support for setting both FDCtrl::dma_chann and FDCtrl::dma.
(A QOM link property 'dma-controller' on the sysbus device which can
be set to an instance of IsaDmaClass is probably the way to go.)
Fixes: 1430759ec3 ("hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.c")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/958
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220505101842.2757905-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
=LXG0
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently vhost-user-scsi driver doesn't allow to change
the configuration space of virtio_scsi, while vhost-user-blk
support that, so here we set the flag in vhost-user-blk driver
and unset it in vhost-user-scsi.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Message-Id: <20220525125540.50979-2-changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Variable `vdev` in `struct vhost_dev` will not be ready
until start the device, so let's not use it for the error
output here.
Fixes: 5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported")
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Message-Id: <20220525125540.50979-1-changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported")
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes: 5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported")
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This ensures that the VIOT ACPI table output is always stable for a given PCI
topology by ensuring that entries are ordered according to min_bus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220525173232.31429-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Perform the generation of the VIOT ACPI table in 2 separate passes: the first pass
enumerates all of the PCI host bridges and adds the min_bus and max_bus information
to an array.
Once this is done the VIOT table header is generated using the size of the array
to calculate the node count, which means it is no longer necessary to use a
sub-array to hold the PCI host bridge range information along with viommu_off.
Finally the PCI host bridge array is iterated again to add the required entries
to the final VIOT ACPI table.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220525173232.31429-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of generating each table entry inline, move the individual PCI host bridge
table entry generation to a separate build_pci_host_range() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220525173232.31429-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is in preparation for separating out the VIOT ACPI table build from the
PCI host bridge numeration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220525173232.31429-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without being able to write these registers, no interleaving is possible.
More refined checks of HDM register state on commit to follow.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608130804.25795-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the code in pcibus_get_fw_dev_path contained the potential for a
stack buffer overflow of 1 byte, potentially writing to the stack an
extra NUL byte.
This overflow could happen if the PCI slot is >= 0x10000000,
and the PCI function is >= 0x10000000, due to the size parameter
of snprintf being incorrectly calculated in the call:
if (PCI_FUNC(d->devfn))
snprintf(path + off, sizeof(path) + off, ",%x", PCI_FUNC(d->devfn));
since the off obtained from a previous call to snprintf is added
instead of subtracted from the total available size of the buffer.
Without the accurate size guard from snprintf, we end up writing in the
worst case:
name (32) + "@" (1) + SLOT (8) + "," (1) + FUNC (8) + term NUL (1) = 51 bytes
In order to provide something more robust, replace all of the code in
pcibus_get_fw_dev_path with a single call to g_strdup_printf,
so there is no need to rely on manual calculations.
Found by compiling QEMU with FORTIFY_SOURCE=3 as the error:
*** buffer overflow detected ***: terminated
Thread 1 "qemu-system-x86" received signal SIGABRT, Aborted.
[Switching to Thread 0x7ffff642c380 (LWP 121307)]
0x00007ffff71ff55c in __pthread_kill_implementation () from /lib64/libc.so.6
(gdb) bt
#0 0x00007ffff71ff55c in __pthread_kill_implementation () at /lib64/libc.so.6
#1 0x00007ffff71ac6f6 in raise () at /lib64/libc.so.6
#2 0x00007ffff7195814 in abort () at /lib64/libc.so.6
#3 0x00007ffff71f279e in __libc_message () at /lib64/libc.so.6
#4 0x00007ffff729767a in __fortify_fail () at /lib64/libc.so.6
#5 0x00007ffff7295c36 in () at /lib64/libc.so.6
#6 0x00007ffff72957f5 in __snprintf_chk () at /lib64/libc.so.6
#7 0x0000555555b1c1fd in pcibus_get_fw_dev_path ()
#8 0x0000555555f2bde4 in qdev_get_fw_dev_path_helper.constprop ()
#9 0x0000555555f2bd86 in qdev_get_fw_dev_path_helper.constprop ()
#10 0x00005555559a6e5d in get_boot_device_path ()
#11 0x00005555559a712c in get_boot_devices_list ()
#12 0x0000555555b1a3d0 in fw_cfg_machine_reset ()
#13 0x0000555555bf4c2d in pc_machine_reset ()
#14 0x0000555555c66988 in qemu_system_reset ()
#15 0x0000555555a6dff6 in qdev_machine_creation_done ()
#16 0x0000555555c79186 in qmp_x_exit_preconfig.part ()
#17 0x0000555555c7b459 in qemu_init ()
#18 0x0000555555960a29 in main ()
Found-by: Dario Faggioli <Dario Faggioli <dfaggioli@suse.com>
Found-by: Martin Liška <martin.liska@suse.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20220531114707.18830-1-cfontana@suse.de>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
As all the CXL elements have moved to boards that support
CXL, there is no need to maintain a top level flag.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This removes the last of the CXL code from the MachineState where it
is visible to all Machines to only those that support CXL (currently i386/pc)
As i386/pc always support CXL now, stop allocating the state independently.
Note the pxb register hookup code runs even if cxl=off in order to detect
pxb_cxl host bridges and fail to start if any are present as they won't
have the control registers available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As the CXLState will no long be accessible via MachineState
at time of PXB_CXL realization, come back later from the machine specific
code to fill in the missing memory region setup. Only at this stage
is it possible to check if cxl=on, so that check is moved to this
later point.
Note that for multiple host bridges, the allocation order of the
register spaces is changed. This will be reflected in ACPI CEDT.
Stubs are added to handle case of CONFIG_PXB=n for machines that
call these functions.
The bus walking logic is common to all machines so add a utility
function + stub to cxl-host*.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst here take the oportunity to shorten the function name.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refactoring step on path to moving all CXL state out of
MachineState.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.
Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.
The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used. Similar to existing
SgxEpcProperties.
Update qemu-options.hx to reflect that this is now a -machine
parameter. The bulk of -M / -machine parameters are documented
under machine, so use that in preference to M.
Update cxl-test and bios-tables-test to reflect new parameters.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the last remaining dependency on ISA in acpi-build.c
is iapc_boot_arch_8042() which pulls in in isa.h
in its own header hw/input/i8042.h. Clean up
not longer needed direct inclusion of isa.h in
acpi-build.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-36-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. and clean up not longer needed conditionals in DSTD build code
tpm-tis AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
tpm-tis 2.0, is not a PCI device but ISA one, move it
under ISA scope to fix incorrect placement.
Fixes: 24cf5413aa (acpi: Make TPM 2.0 with TIS available as MSFT0101)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-32-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. and clean up not longer needed conditionals in DSTD build code
pvpanic-isa AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. and clean up not longer needed conditionals in DSTD build
code. applesmc AML will be fetched and included when ISA bridge
will build its own AML code (incl. attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-25-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
replaces adhoc build_isa_devices_aml() with generic AcpiDevAmlIf
way to build bridge AML including all devices that are attached
to its ISA bus.
Later when PCI is converted to AcpiDevAmlIf, build_q35_isa_bridge()
will also be dropped since PCI parts itself will take care of
building device prologue/epilogue AML for each enumerated PCI device.
Expected AML change is contextual, where ISA devices are moved from
separately declared _SB.PCI0.ISA scope, directly under Device(ISA)
node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
replaces ad-hoc build_isa_devices_aml() with generic AcpiDevAmlIf
way to build bridge AML including all devices that are attached to
its ISA bus.
Later when PCI is converted to AcpiDevAmlIf, build_piix4_isa_bridge()
will also be dropped since PCI parts itself will take care of
building device prologue/epilogue AML for each enumerated PCI
device.
Expected AML change is contextual, where ISA devices are moved
from separately declared _SB.PCI0.ISA scope , directly under
Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-20-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
by default we do not version ACPI AML as it's considered
a part of firmware. Drop do_not_add_smb_acpi that blocked
SMBUS AML description on 3.1 and older machine types without
providing justification.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
convert ad-hoc way we use to generate AML for ISA/SMB IPMI devices
to a generic approach (i.e. make devices provide its own AML blobs
like it is done with other ISA devices (ex. KBD))
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
wire AcpiDevAmlIf interface to build ich9-smb and its slave
devices AML. It will be used by followup patches to switch
from creating AML in ad-hoc way to a more systematic one
that will scan present devices and ask them to provide
their AML code like it's done with ISA devices.
This patch is a partial conversion, as it only fetches
AML from slave devices attached to its I2C bus.
The conversion will be completed when PCI bus is
switched to use AcpiDevAmlIf and build_smb0() could be
dropped.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-16-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
smbus-ipmi AML description needs to specify a path to its parent
node in _CRS. The rest of IPMI inplementations (ISA based)
do not need path at all. Instead of passing through a full path
use relative path to point to smbus-ipmi's parent node, it will
let follow up patches to create IPMI device AML in a generic
way instead of current ad-hoc way. (i.e. AML will be generated
the same way it's done for other ISA device, and smbus will be
converted to generate AML for its slave devices the same way
as ISA)
expected AML change:
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0,
- AddressingMode7Bit, "\\_SB.PCI0.SMB0",
+ AddressingMode7Bit, "^",
0x00, ResourceProducer, , Exclusive,
)
})
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To allow incremental conversion from ISADeviceClass::build_aml
to AcpiDevAmlIf, add support for the later without removing
the former. Once conversion is complete, another commit will
drop ISADeviceClass::build_aml related code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is already ISADeviceClass::build_aml() callback which
builds device specific AML blob for some ISA devices.
To extend the same idea to other devices, add TYPE_ACPI_DEV_AML_IF
Interface that will provide a more generic callback which
will be used not only for ISA but other devices. It will
allow get rid of some data-mining and ad-hoc AML building,
by asking device(s) to generate its own AML blob like it's
done for ISA devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Various loader functions return an int which limits images to 2GB which
is fine for things like a BIOS/kernel image, but if we want to be able
to load memory images or large ramdisks then any file over 2GB would
silently fail to load.
Cc: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211111141141.3295094-2-jamie@nuviainc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit ad40be27 "target/riscv: Support start kernel directly by
KVM" we have been overflowing the addr_config on "M,MS..."
configurations, as reported https://gitlab.com/qemu-project/qemu/-/issues/1050.
This commit changes the loop in sifive_plic_create() from iterating over
the number of harts to just iterating over the addr_config. The
addr_config is based on the hart_config, and will contain interrup details
for all harts. This way we can't iterate past the end of addr_config.
Fixes: ad40be2708 ("target/riscv: Support start kernel directly by KVM")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1050
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220601013631.196854-1-alistair.francis@opensource.wdc.com>
fw_cfg DT node is generated after the create_fdt without any check
if the DT is being loaded from the commandline. This results in
FDT_ERR_EXISTS error if dtb is loaded from the commandline.
Generate fw_cfg node only if the DT is not loaded from the commandline.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220526203500.847165-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function was declared in a generic and public header, implemented
in a device-specific source file but only used in xen_platform. Given its
'aux' parameter, this function is more xen-specific than piix-specific.
Also, the hardcoded magic constants seem to be generic and related to
PCIIDEState and IDEBus rather than piix.
Therefore, move this function to xen_platform, unexport it, and drop the
"piix3" in the function name as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220513180957.90514-4-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The comment is based on commit message
ae4d2eb273 'xen-platform: add missing disk
unplug option'. Since it seems to describe design decisions and
limitations that still apply it seems worth having.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220513180957.90514-3-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
When the display port has been initially implemented the device
driver wasn't using interrupts. Now that the display port driver
waits for vblank interrupt it has been noticed that the irq mapping
is wrong. So use the value from the linux device tree and the
ultrascale+ reference manual.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-5-fkonrad@xilinx.com
[PMM: refold lines in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix interrupt disable logic. Mask value 1 indicates that interrupts are
disabled.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-4-fkonrad@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a periodic timer which raises vblank at a frequency of 30Hz.
Note that this is a migration compatibility break for the
xlnx-zcu102 board type.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-3-fkonrad@xilinx.com
Changes by fkonrad:
- Switched to transaction-based ptimer API.
- Added the DP_INT_VBLNK_START macro.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
[PMM: bump vmstate version, add commit message note about
compat break]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The core and the vblend registers size are wrong, they should respectively be
0x3B0 and 0x1E0 according to:
https://www.xilinx.com/htmldocs/registers/ug1087/ug1087-zynq-ultrascale-registers.html.
Let's fix that and use macros when creating the mmio region.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-2-fkonrad@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
851d6d1a0f ("vfio/common: remove spurious tpm-crb-cmd misalignment
warning") removed the warning on vfio_listener_region_add() path.
However the same warning also hits on region_del path. Let's remove
it and reword the dynamic trace as this can be called on both
map and unmap path.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220524091405.416256-1-eric.auger@redhat.com
Fixes: 851d6d1a0f ("vfio/common: remove spurious tpm-crb-cmd misalignment warning")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmKf8HgACgkQda1lgCoL
QhHx8Qf/QB2z+0B1xKKn8NqrWbZ+FaVlnPu/3hX4kraCY5zAYV9e64kdWhuIKRbM
74/KARGMpkme6Y8rUSK6mVeiY+ul+egfVMnKyfhsM1jhAQT/DzSlht/XZzbn3Mg+
FFXQBMqcvcNWH53q9zi9GJYqH4tcxUku3ejgodU4+SO2wB5S59pS/tD+i5H06Vy5
Iw1kW6I11gYhJGETxVgb6F2Jfyu6uPWFhIg7eN06XwNExFc45E8GjrpIs2rO78GN
OzMBjwAG+C+/PU+UZDOd5Zhq5qv+8DcvDQuPXyqksxPcFvouvLghQvQL/h7neMlM
jOwHS153ay0EAT/t2lZafsBwqKQxvQ==
=b9Qe
-----END PGP SIGNATURE-----
Merge tag 'pull-tpm-2022-06-07-1' of https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2022/06/07 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmKf8HgACgkQda1lgCoL
# QhHx8Qf/QB2z+0B1xKKn8NqrWbZ+FaVlnPu/3hX4kraCY5zAYV9e64kdWhuIKRbM
# 74/KARGMpkme6Y8rUSK6mVeiY+ul+egfVMnKyfhsM1jhAQT/DzSlht/XZzbn3Mg+
# FFXQBMqcvcNWH53q9zi9GJYqH4tcxUku3ejgodU4+SO2wB5S59pS/tD+i5H06Vy5
# Iw1kW6I11gYhJGETxVgb6F2Jfyu6uPWFhIg7eN06XwNExFc45E8GjrpIs2rO78GN
# OzMBjwAG+C+/PU+UZDOd5Zhq5qv+8DcvDQuPXyqksxPcFvouvLghQvQL/h7neMlM
# jOwHS153ay0EAT/t2lZafsBwqKQxvQ==
# =b9Qe
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Jun 2022 05:42:32 PM PDT
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2022-06-07-1' of https://github.com/stefanberger/qemu-tpm:
tpm_crb: mark command buffer as dirty on request completion
hw/tpm/tpm_tis_common.c: Assert that locty is in range
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At the moment, there doesn't seems to be any way to know that QEMU
made modification to the command buffer. This is potentially an issue
on Xen while migrating a guest, as modification to the buffer after
the migration as started could be ignored and not transfered to the
destination.
Mark the memory region of the command buffer as dirty once a request
is completed.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20220411144749.47185-1-anthony.perard@citrix.com
This is a placeholder for missing ACPI, and will eventually be replaced.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-41-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-40-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch add ls7a rtc device support.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-39-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
1.Add uart,virtio-net,vga and usb for 3A5000.
2.Add irq set and map for the pci host. Non pci device
use irq 0-16, pci device use 16-64.
3.Add some unimplented device to emulate guest unused
memory space.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-38-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch add the irq hierarchy for the virt board.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-36-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch realize the EIOINTC interrupt controller.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-35-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch realize PCH-MSI interrupt controller.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-34-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch realize the PCH-PIC interrupt controller.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-33-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch realize the IPI interrupt controller.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-32-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emulate a 3A5000 board use the new loongarch instruction.
3A5000 belongs to the Loongson3 series processors.
The board consists of a 3A5000 cpu model and the virt
bridge. The host 3A5000 board is really complicated and
contains many functions.Now for the tcg softmmu mode
only part functions are emulated.
More detailed info you can see
https://github.com/loongson/LoongArch-Documentation
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.
When the module is enabled in Kconfig we are sure that its dependencies
will be enabled as well, thus the module will be loaded without any
problem.
The correct way to use module_kconfig is by passing the Kconfig option
to module_kconfig (or the *config-devices.mak without CONFIG_).
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165369002370.5857.12150544416563557322.stgit@work>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NVMe command set specification for end-to-end data protection formatted
namespace states:
o If the Reference Tag Check bit of the PRCHK field is set to ‘1’ and
the namespace is formatted for Type 3 protection, then the
controller:
▪ should not compare the protection Information Reference Tag
field to the computed reference tag; and
▪ may ignore the ILBRT and EILBRT fields. If a command is
aborted as a result of the Reference Tag Check bit of the
PRCHK field being set to ‘1’, then that command should be
aborted with a status code of Invalid Protection Information,
but may be aborted with a status code of Invalid Field in
Command.
Currently qemu compares reftag in the nvme_dif_prchk function whenever
Reference Tag Check bit is set in the command. For type 3 namespaces
however, caller of nvme_dif_prchk - nvme_dif_check does not increment
reftag for each subsequent logical block. That way commands incorporating
more than one logical block for type 3 formatted namespaces with reftag
check bit set, always fail with End-to-end Reference Tag Check Error.
Comply with spec by handling case of set Reference Tag Check
bit in the type 3 formatted namespace.
Fixes: 146f720c55 ("hw/block/nvme: end-to-end data protection")
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Linux kernel quirks the QEMU NVMe controller pretty heavily because
of the namespace identifier mess. Since this is now fixed, bump the
firmware revision number to allow the quirk to be disabled for this
revision.
As of now, bump the firmware revision number to be equal to the QEMU
release version number.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not report the "null uuid" (all zeros) in the namespace
identification descriptors.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not default to generate an UUID for namespaces if it is not
explicitly specified.
This is a technically a breaking change in behavior. However, since the
UUID changes on every VM launch, it is not spec compliant and is of
little use since the UUID cannot be used reliably anyway and the
behavior prior to this patch must be considered buggy.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We cannot provide auto-generated unique or persistent namespace
identifiers (EUI64, NGUID, UUID) easily. Since 6.1, namespaces have been
assigned a generated EUI64 of the form "52:54:00:<namespace counter>".
This is will be unique within a QEMU instance, but not globally.
Revert that this is assigned automatically and immediately deprecate the
compatibility parameter. Users can opt-in to this with the
`eui64-default=on` device parameter or set it explicitly with
`eui64=UINT64`.
Cc: libvir-list@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Identify Controller Serial Number (SN) is the serial number for the
NVM subsystem and must be the same across all controller in the NVM
subsystem.
Enforce this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Pass the right constant to nvme_smart_event(). The NVME_AER* values hold
the bit position in the SMART byte, not the shifted value that we expect
it to be in nvme_smart_event().
Fixes: c62720f137 ("hw/block/nvme: trigger async event during injecting smart warning")
Acked-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Current implementation have problem in the read part of copy command.
Because there is no metadata mangling before nvme_dif_check invocation,
reftag error could be thrown for blocks of namespace that have not been
previously written to.
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since there is no return after nvme_dsm_cb invocation, metadata
associated with non-zero block range is currently zeroed. Also this
behaviour leads to segfault since we schedule iocb->bh two times.
First when entering nvme_dsm_cb with iocb->idx == iocb->nr and
second because of missing return on call stack unwinding by calling
blk_aio_pwrite_zeroes and subsequent nvme_dsm_cb callback.
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since nlbas is of type int, it does not work with large namespace size
values, e.g., 9 TB size of file backing namespace and 8 byte metadata
with 4096 bytes lbasz gives negative nlbas value, which is later
promoted to negative int64_t type value and results in negative
ns->moff which breaks namespace
Signed-off-by: Dmitry Tikhov <ddtikhov@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The machine name already contains the words "ccw" and "virtio", so
using "VirtIO-ccw" in the description likely does not really help
the average user to get an idea what this machine type is about.
Thus let's switch to "Virtual s390x machine" now, since "virtual
machine" should be a familiar term, and "s390x" signals that this
is about 64-bit guests (unlike S390 which could mean that it is
31-bit only).
Also expand "v" to "version", since this makes it easier to use
this macro also with non-numeric machine names in downstream.
Message-Id: <20220506065026.513590-1-thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In tpm_tis_mmio_read(), tpm_tis_mmio_write() and
tpm_tis_dump_state(), we calculate a locality index with
tpm_tis_locality_from_addr() and then use it as an index into the
s->loc[] array. In all these cases, the array index can't overflow
because the MemoryRegion is sized to be TPM_TIS_NUM_LOCALITIES <<
TPM_TIS_LOCALITY_SHIFT bytes. However, Coverity can't see that, and
it complains (CID 1487138, 1487180, 1487188, 1487198, 1487240).
Add an assertion to tpm_tis_locality_from_addr() that the calculated
locality index is valid, which will help Coverity and also catch any
potential future bug where the MemoryRegion isn't sized exactly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20220525125904.483075-1-stefanb@linux.ibm.com
vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.
This essentially reverts commit 4dd8a7064b
("vmbus: add infrastructure to save/load vmbus requests").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211106134155.582312-2-philmd@redhat.com>
[MSS: Remove also corresponding variables, which are now unused]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
U-Boot queries the FIFO water level to reduce checking status register
when doing PIO SD card operation.
Report a FIFO water level of 1 when data is ready, to prevent the code
from trying to read 0 words from the FIFO each time.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Message-id: 20220520124200.2112699-1-uwu@icenowy.me
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This series fixes the SeaBIOS-hppa firmware and the serial ports setup code in
qemu so that it reflects the real hardware and allows serial port pass-through
from the host to guests.
Tested with Linux guests.
v2: Changes suggested by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- Split out hppa_hardware.h restoration to an own patch
- Drop unneccesary checks for serial_hd(x)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYpH5NAAKCRD3ErUQojoP
X0p3APsHdN4SDIVHJ3vjfzrvmuJ8rEUzsK4COdlgWBUT4jgVBgEApk9jj6X0ZfkI
bUVVQAOqHZbgXhEeiHNVWbsPfEqsqQw=
=aj8q
-----END PGP SIGNATURE-----
Merge tag 'hppa-serial-fix-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: Fix serial port pass-through
This series fixes the SeaBIOS-hppa firmware and the serial ports setup code in
qemu so that it reflects the real hardware and allows serial port pass-through
from the host to guests.
Tested with Linux guests.
v2: Changes suggested by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- Split out hppa_hardware.h restoration to an own patch
- Drop unneccesary checks for serial_hd(x)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYpH5NAAKCRD3ErUQojoP
# X0p3APsHdN4SDIVHJ3vjfzrvmuJ8rEUzsK4COdlgWBUT4jgVBgEApk9jj6X0ZfkI
# bUVVQAOqHZbgXhEeiHNVWbsPfEqsqQw=
# =aj8q
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 28 May 2022 03:28:04 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-serial-fix-pull-request' of https://github.com/hdeller/qemu-hppa:
hppa: Fix serial port assignments and pass-through
hppa: Sync contents of hppa_hardware.h header file with SeaBIOS-hppa
New SeaBIOS-hppa version 6
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This fixes the serial ports in the emulation to behave as on original
hardware.
On the real hardware, the LASI UART is serial port #0 and the DINO UART
is serial port #1. This is fixed in SeaBIOS-hppa firmware v6, which is
why at least this firmware version is required.
The serial port addresses in hppa/hppa_hardware.h have to be swapped,
and when creating the virtual serial ports the correct port addresses
are used.
This patch now for example allows to specify on the qemu command line:
-serial mon:stdio -serial /dev/ttyS4
to use the emulated ttyS0 in the guest for console output, and pass
ttyS4 from the host to ttyS1 in the guest.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The hppa_hardware.h header file holds many constants for addresses and
offsets which are needed while building the firmware (SeaBIOS-hppa) and
while setting up the virtual machine in QEMU.
That's why this header file needs to be in sync between both source code
repositories. This patch adds a comment mentioning this dependency at
the top of this file and restores some DINO relevant offsets.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
When writing a register from the TCTXT memory region (4th page within
the IC BAR), we were overwriting the Presentation Controller (PC)
register at the same offset. It looks like a silly cut and paste
error.
We were somehow lucky: the TCTXT registers being touched are
TCTXT_ENx/_SET/_RESET to enable physical threads and the PC registers
at the same offset are either not used by our model or the update was
harmless.
Found through code inspection.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220523151859.72283-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
tl;dr: This allows Big Endian zImage booting via -kernel + x-vof=on.
QEMU loads the kernel at 0x400000 by default which works most of
the time as Linux kernels are relocatable, 64bit and compiled with "-pie"
(position independent code). This works for a little endian zImage too.
However a big endian zImage is compiled without -pie, is 32bit, linked to
0x4000000 so current QEMU ends up loading it at
0x4400000 but keeps spapr->kernel_addr unchanged so booting fails.
This uses the kernel address returned from load_elf().
If the default kernel_addr is used, there is no change in behavior (as
translate_kernel_address() takes care of this), which is:
LE/BE vmlinux and LE zImage boot, BE zImage does not.
If the VM created with "-machine kernel-addr=0,x-vof=on", then QEMU
prints a warning and BE zImage boots.
Note #1: SLOF (x-vof=off) still cannot boot a big endian zImage as
SLOF enables MSR_SF for everything loaded by QEMU and this leads to early
crash of 32bit zImage.
Note #2: BE/LE vmlinux images set MSR_SF in early boot so these just work;
a LE zImage restores MSR_SF after every CI call and we are lucky enough
not to crash before the first CI call.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220504065536.3534488-1-aik@ozlabs.ru>
[danielhb: use PRIx64 instead of lx in warn_report]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 28290f37e2 'PPC: E500: Generate
device tree on reset' improved device tree generation and made
BINARY_DEVICE_TREE_FILE obsolete.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220505161805.11116-8-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
-machine graphics=off is the usual way to tell the firmware or the OS that the
user wants a serial console. The pseries machine however does not support
this, and never adds the stdout-path node to the device tree if a VGA device
is provided. This is in addition to the other magic behavior of VGA devices,
which is to add a keyboard and mouse to the default USB bus.
Split spapr->has_graphics in two variables so that the two behaviors can be
separated: the USB devices remains the same, but the stdout-path is added
even with "-device VGA -machine graphics=off".
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220507054826.124936-1-pbonzini@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Prior to this patch, the pre-GRUB Solaris x86 bootloader would fail to
load on QEMU with the following screen output:
SunOS Secondary Boot version 3.00
prom_panic: Could not mount filesystem.
Entering boot debugger:
[136419]: _
This occurs because the bootloader issues an ATA IDENTIFY DEVICE
command, and then reads the resulting 256 words of parameter
information using inb rather than the correct inw. As the previous
behavior of QEMU was to return 0xFF and not advance the drive's sector
buffer, DRQ would never be cleared and the bootloader would be blocked
from selecting a secondary ATA device, such as an optical drive.
Resolves:
* [Bug 1639394] Unable to boot Solaris 8/9 x86 under Fedora 24
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220520235200.1138450-1-lkujaw@member.fsf.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several functions have a local variable that is just a copy of one of
the function parameters. This is unneeded complication so just get rid
of these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <d959aa0b267eb139a994e41ca0b7ba87d9cef7a9.1650706617.git.balaton@eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The warm_reset() and cold_reset() functions are not implemented and do
nothing so no point in calling them or keep around as dead code.
Therefore remove them for now.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <cc6e99fd498a9ae358ebce787fc04ab6e8201879.1650706617.git.balaton@eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Aspeed GPIO model extensions
* GPIO support for the Aspeed AST1030 SoC
* New fby35 machine (AST2600 based)
* Extra unit tests for the GPIO and SMC models
* Initialization of all UART with serial devices
* AST2600 EVB and Documentation update
-----BEGIN PGP SIGNATURE-----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=Vtgk
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20220525' of https://github.com/legoater/qemu into staging
aspeed queue:
* Aspeed GPIO model extensions
* GPIO support for the Aspeed AST1030 SoC
* New fby35 machine (AST2600 based)
* Extra unit tests for the GPIO and SMC models
* Initialization of all UART with serial devices
* AST2600 EVB and Documentation update
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmKOUhcACgkQUaNDx8/7
# 7KF3MBAAuIusIv5HXKEzLNJK2Gyk/qiXy+CAkfr+ZbpAk96JeA5y0fVHtkThSj6k
# KbNNVAUojWC/AKsvldYxKkcyt5A8nNPkNP6H0c3CGUCrHUo8rdMW9otZGS91uH9+
# Xvdq7ANuP/BAGNSXXMJ3p3h6VwOVrJnnRAZR6Xy4ytWZpWnYhnJNca9//0JZ2lu+
# 2h/hOlx8IE/c8YcyfixyRtuL4ElobSaC1Ajf/wcByWINEGecbWBrsEJq9F6K8me8
# 8w2A3dBZaE3FfYJXEaDBqPzmB3dmgsui0DzvHqb6GKLZ1zzTPzc1xwqx0xyfb4iN
# e3uxC+H1fp6VvHLN21bgl+nQtFEirSxUe0KQkeITjDDzqnnTECrdsSzxJXQ+/fUq
# yhj63ceijsjqEfupuDtKqafSJTWz/ELNjx0mspFWm0a4zHbp+OzwNBK9eFW+h5gf
# ydMpEB7hzpJFQT4g2UZSWrYOVRXRZRcswoK5ZxThx90+TDZ3Z+X3Nn8qqmWwbb8s
# WzqRNMzvl0eh6hbAWcexkoDU1f5TxJ9kJRHQV3cdzp+BMNzMGTyqHetgC3d9MsdR
# x5adfgMUblXO+SukxUNm+N1KLTET6XNTNAUlHDeb1KMqipbRH9tH5sxOyKFAGHkP
# 0PY+zN4atV/H8hbAjHrg4b3BOQvHr4ro4Liw4I8XQT/gsjD4bBg=
# =Vtgk
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 May 2022 08:58:15 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20220525' of https://github.com/legoater/qemu:
hw/arm/aspeed: Add i2c devices for AST2600 EVB
hw/gpio: replace HWADDR_PRIx with PRIx64
hw/gpio support GPIO index mode for write operation.
hw/gpio: Add ASPEED GPIO model for AST1030
hw/gpio Add GPIO read/write trace event.
hw: aspeed: Init all UART's with serial devices
hw: aspeed: Introduce common UART init function
hw: aspeed: Ensure AST1030 respects uart-default
hw: aspeed: Add uarts_num SoC attribute
hw: aspeed: Add missing UART's
aspeed: Introduce a get_irq AspeedSoCClass method
hw: m25p80: allow write_enable latch get/set
docs: aspeed: Add fby35 board
hw/arm/aspeed: Add fby35 machine type
docs: add minibmc section in aspeed document
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add EEPROM and LM75 temperature sensor according to hardware schematic
Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It did not support GPIO index mode for read operation.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220525053444.27228-4-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST1030 integrates one set of Parallel GPIO Controller
with maximum 151 control pins, which are 21 groups
(A~U, exclude pin: M6 M7 Q5 Q6 Q7 R0 R1 R4 R5 R6 R7 S0 S3 S4
S5 S6 S7 ) and the group T and U are input only.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220525053444.27228-3-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Background:
AspeedMachineClass.uart_default specifies the serial console UART, which
usually corresponds to the "stdout-path" in the device tree.
The default value is UART5, since most boards use UART5 for this:
amc->uart_default = ASPEED_DEV_UART5;
Users can override AspeedMachineClass.uart_default in their board's machine
class init to specify something besides UART5. For example, for fuji-bmc:
amc->uart_default = ASPEED_DEV_UART1;
We only connect this one UART, of the 5 UART's on the AST2400 and AST2500
and the 13 UART's on the AST2600 and AST1030, to a serial device that QEMU
users can use. None of the other UART's are initialized, and the only way
to override this attribute is by creating a specialized board definition,
requiring QEMU source code changes and rebuilding.
The result of this is that if you want to get serial console output on a
board that uses UART3, you need to add a board definition. This was
encountered by Zev in OpenBMC. [1]
Changes:
This commit initializes all of the UART's present on each Aspeed chip with
serial devices and allows the QEMU user to connect as many or few as they
like to serial devices. For example, you can still run QEMU and just connect
stdout to the machine's default UART, without specifying any additional
serial devices:
qemu-system-arm -machine fuji-bmc \
-drive file=fuji.mtd,format=raw,if=mtd \
-nographic
However, if you don't want to add a special machine definition, you can now
manually configure UART1 to connect to stdout and get serial console output,
even if the machine's default is UART5:
qemu-system-arm -machine ast2600-evb \
-drive file=fuji.mtd,format=raw,if=mtd \
-serial null -serial mon:stdio -display none
In the example above, the first "-serial null" argument is connected to
UART5, and "-serial mon:stdio" is connected to UART1.
Another example: you can get serial console output from Wedge100, which uses
UART3, by reusing the palmetto AST2400 machine and rewiring the serial
device arguments:
qemu-system-arm -machine palmetto-bmc \
-drive file=wedge100.mtd,format=raw,if=mtd \
-serial null -serial null -serial null \
-serial mon:stdio -display none
There is a slight change in behavior introduced with this change: now, each
UART's memory-mapped IO region will have a serial device model connected to
it. Previously, all reads and writes to those regions would be ineffective
and return zero values, but now some values will be nonzero, even when the
user doesn't connect a serial device backend (like a socket, file, etc). For
example, the line status register might indicate that the transmit buffer is
empty now, whereas previously it might have always indicated it was full.
[1] https://lore.kernel.org/openbmc/YnzGnWjkYdMUUNyM@hatter.bewilderbeest.net/
[2] https://github.com/facebook/openbmc/releases/download/v2021.49.0/fuji.mtd
[3] https://github.com/facebook/openbmc/releases/download/v2021.49.0/wedge100.mtd
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-6-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The AST1030 machine initialization was not respecting the Aspeed SoC
property "uart-default", which specifies which UART should be connected to
the first serial device, it was just always connecting UART5. This doesn't
change any behavior, because the default value for "uart-default" is UART5,
but it makes it possible to override this in new machine definitions using
the AST1030.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-4-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2400 and AST2500 have 5 UART's, while the AST2600 and AST1030 have 13.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-3-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This adds the missing UART memory and IRQ mappings for the AST2400, AST2500,
AST2600, and AST1030.
This also includes the new UART interfaces added in the AST2600 and AST1030
from UART6 to UART13. The addresses and interrupt numbers for these two
later chips are identical.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
and make routine aspeed_soc_get_irq() common to all SoCs. This will be
useful to share code.
Cc: Jamin Lin <jamin_lin@aspeedtech.com>
Cc: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516055620.2380197-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The write_enable latch property is not currently exposed.
This commit makes it a modifiable property.
Signed-off-by: Iris Chen <irischenlj@fb.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220513055022.951759-1-irischenlj@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add the 'fby35-bmc' machine type based on the kernel DTS[1] and userspace
i2c setup scripts[2]. Undefined values are inherited from the AST2600-EVB.
Reference images can be found in Facebook OpenBMC Github Release assets
as "fby35.mtd". [3]
You can boot the reference images as follows (fby35 uses dual-flash):
qemu-system-arm -machine fby35-bmc \
-drive file=fby35.mtd,format=raw,if=mtd \
-drive file=fby35.mtd,format=raw,if=mtd \
-nographic
[1] 412d505325/arch/arm/boot/dts/aspeed-bmc-facebook-fby35.dts
[2] e2294ff5d3/meta-facebook/meta-fby35/recipes-fby35/plat-utils/files/setup-dev.sh
[3] https://github.com/facebook/openbmc/releases
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220503225925.1798324-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
VxWorks 7 uses the same boot interface as the Linux kernel on Arm
(64-bit only), PowerPC and RISC-V architectures. Add logic to set
is_linux to true for VxWorks uImage for these architectures in
load_uboot_image().
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220324134812.541274-2-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When both APLIC and IMSIC are present in virt machine, the APLIC should
be used as parent interrupt controller for dynamic platform devices.
In case of multiple sockets, we should prefer interrupt controller of
socket0 for dynamic platform devices.
Fixes: 3029fab643 ("hw/riscv: virt: Add support for generating
platform FDT entries")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-9-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The QOM API already provides accessors for uint32 values, so reuse them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220301225220.239065-3-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The QOM API already provides getters for uint64 and uint32 values, so reuse
them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301225220.239065-2-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If specified CPU configuration is not valid, not just it prints error
message, it aborts and generates core dumps (depends on the operating
system). This kind of error handling should be used only when a serious
runtime error occurs.
This commit makes error handling on CPU configuration more generous on
sifive_e/u and opentitan machines. It now just prints error message and
quits (without coredumps and aborts).
This is separate from spike/virt because it involves different type
(TYPE_RISCV_HART_ARRAY) on sifive_e/u and opentitan machines.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <09e61e58a7543da44bdb0e0f5368afc8903b4aa6.1652509778.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If specified CPU configuration is not valid, not just it prints error
message, it aborts and generates core dumps (depends on the operating
system). This kind of error handling should be used only when a serious
runtime error occurs.
This commit makes error handling on CPU configuration more generous on
virt/spike machines. It now just prints error message and quits (without
coredumps and aborts).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <d17381d3ea4992808cf1894f379ca67220f61b45.1652509778.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
timecmp update function should be invoked with hartid for which
timecmp is being updated. The following patch passes the incorrect
hartid to the update function.
Fixes: e2f01f3c2e ("hw/intc: Make RISC-V ACLINT mtime MMIO register writable")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220513221458.1192933-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We had a few CPTR_* bits defined, but missed quite a few.
Complete all of the fields up to ARMv9.2.
Use FIELD_EX64 instead of manual extract32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517054850.177016-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The traditional ptimer behaviour includes a collection of weird edge
case behaviours. In 2016 we improved the ptimer implementation to
fix these and generally make the behaviour more flexible, with
ptimers opting in to the new behaviour by passing an appropriate set
of policy flags to ptimer_init(). For backwards-compatibility, we
defined PTIMER_POLICY_DEFAULT (which sets no flags) to give the old
weird behaviour.
This turns out to be a poor choice of name, because people writing
new devices which use ptimers are misled into thinking that the
default is probably a sensible choice of flags, when in fact it is
almost always not what you want. Rename PTIMER_POLICY_DEFAULT to
PTIMER_POLICY_LEGACY and beef up the comment to more clearly say that
new devices should not be using it.
The code-change part of this commit was produced by
sed -i -e 's/PTIMER_POLICY_DEFAULT/PTIMER_POLICY_LEGACY/g' $(git grep -l PTIMER_POLICY_DEFAULT)
with the exception of a test name string change in
tests/unit/ptimer-test.c which was added manually.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220516103058.162280-1-peter.maydell@linaro.org
The virt board generates a gpio-keys node in the dtb, but it
incorrectly gives this node #size-cells and #address-cells
properties. If you dump the dtb with 'machine dumpdtb=file.dtb'
and run it through dtc, dtc will warn about this:
Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove the bogus properties.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220513131316.4081539-3-peter.maydell@linaro.org
In the virt board with secure=on we put two nodes in the dtb
for flash devices: one for the secure-only flash, and one
for the non-secure flash. We get the reg properties for these
correct, but in the DT node name, which by convention includes
the base address of devices, we used the wrong address. Fix it.
Spotted by dtc, which will complain
Warning (unique_unit_address): /flash@0: duplicate unit-address (also used in node /secflash@0)
if you dump the dtb from QEMU with -machine dumpdtb=file.dtb
and then decompile it with dtc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220513131316.4081539-2-peter.maydell@linaro.org
Except hw/core/irq.c which implements the forward-declared opaque
qemu_irq structure, hw/adc/zynq-xadc.{c,h} are the only files not
using the typedef. Fix this single exception.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20220509202035.50335-1-philippe.mathieu.daude@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We previously open-coded the expression for the number of virtual APR
registers and the assertion that it was not going to cause us to
overflow the cs->ich_apr[] array. Factor this out into a new
ich_num_aprs() function, for consistency with the icc_num_aprs()
function we just added for the physical APR handling.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-7-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-6-peter.maydell@linaro.org
Make the GICv3 set its number of bits of physical priority from the
implementation-specific value provided in the CPU state struct, in
the same way we already do for virtual priority bits. Because this
would be a migration compatibility break, we provide a property
force-8-bit-prio which is enabled for 7.0 and earlier versioned board
models to retain the legacy "always use 8 bits" behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-6-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-5-peter.maydell@linaro.org
The GICv3 code has always supported a configurable number of virtual
priority and preemption bits, but our implementation currently
hardcodes the number of physical priority bits at 8. This is not
what most hardware implementations provide; for instance the
Cortex-A53 provides only 5 bits of physical priority.
Make the number of physical priority/preemption bits driven by fields
in the GICv3CPUState, the way that we already do for virtual
priority/preemption bits. We set cs->pribits to 8, so there is no
behavioural change in this commit. A following commit will add the
machinery for CPUs to set this to the correct value for their
implementation.
Note that changing the number of priority bits would be a migration
compatibility break, because the semantics of the icc_apr[][] array
changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-5-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-4-peter.maydell@linaro.org
The GIC_MIN_BPR constant defines the minimum BPR value that the TCG
emulated GICv3 supports. We're currently using this also as the
value we reset the KVM GICv3 ICC_BPR registers to, but this is only
right by accident.
We want to make the emulated GICv3 use a configurable number of
priority bits, which means that GIC_MIN_BPR will no longer be a
constant. Replace the uses in the KVM reset code with literal 0,
plus a constant explaining why this is reasonable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-4-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-3-peter.maydell@linaro.org
As noted in the comment, the PRIbits field in ICV_CTLR_EL1 is
supposed to match the ICH_VTR_EL2 PRIbits setting; that is, it is the
virtual priority bit setting, not the physical priority bit setting.
(For QEMU currently we always implement 8 bits of physical priority,
so the PRIbits field was previously 7, since it is defined to be
"priority bits - 1".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-3-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-2-peter.maydell@linaro.org
We allow a GICv3 to be connected to any CPU, but we don't do anything
to handle the case where the CPU type doesn't in hardware have a
GICv3 CPU interface and so the various GIC configuration fields
(gic_num_lrs, vprebits, vpribits) are not specified.
The current behaviour is that we will add the EL1 CPU interface
registers, but will not put in the EL2 CPU interface registers, even
if the CPU has EL2, which will leave the GIC in a broken state and
probably result in the guest crashing as it tries to set it up. This
only affects the virt board when using the cortex-a15 or cortex-a7
CPU types (both 32-bit) with -machine gic-version=3 (or 'max')
and -machine virtualization=on.
Instead of failing to set up the EL2 registers, if the CPU doesn't
define the GIC configuration set it to a reasonable default, matching
the standard configuration for most Arm CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-2-peter.maydell@linaro.org
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
=ZrTm
-----END PGP SIGNATURE-----
Merge tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
# X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
# 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
# =ZrTm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 09:17:51 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa:
artist: Fix X cursor position calculation in X11
artist: Emulate screen blanking
artist: Allow to turn cursor on or off
artist: Fix vertical X11 cursor position in HP-UX
artist: Use human-readable variable names instead of reg_xxx
artist: Introduce constant for max cursor size
seabios-hppa: Update SeaBIOS-hppa to VERSION 5
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The MAC of the tulip card is stored in the EEPROM and at startup
tulip_fill_eeprom() is called to initialize the EEPROM with the MAC
address given on the command line, e.g.:
-device tulip,mac=00:11:22:33:44:55
In case the mac address was not given on the command line,
tulip_fill_eeprom() initializes the MAC in EEPROM with 00:00:00:00:00:00
which breaks e.g. a HP-UX guest.
Fix this problem by moving qemu_macaddr_default_if_unset() a few lines
up, so that a default mac address is assigned before tulip_fill_eeprom()
initializes the EEPROM.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
most of CXL support
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
=xdSk
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
most of CXL support
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
# MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
# SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
# 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
# PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
# f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
# =xdSk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits)
vhost-user-scsi: avoid unlink(NULL) with fd passing
virtio-net: don't handle mq request in userspace handler for vhost-vdpa
vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request()
vhost-vdpa: backend feature should set only once
vhost-net: fix improper cleanup in vhost_net_start
vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa
virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated
hw/i386/amd_iommu: Fix IOMMU event log encoding errors
hw/i386: Make pic a property of common x86 base machine type
hw/i386: Make pit a property of common x86 base machine type
include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX
include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK
docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG
vhost-user: more master/slave things
virtio: add vhost support for virtio devices
virtio: drop name parameter for virtio_init()
virtio/vhost-user: dynamically assign VhostUserHostNotifiers
hw/virtio/vhost-user: don't suppress F_CONFIG when supported
include/hw: start documenting the vhost API
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* misc qga-vss fixes
* remove the deprecated CPU model 'Icelake-Client'
* support for x86 architectural LBR
* remove deprecated properties
* replace deprecated -soundhw with -audio
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ/hZ4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN2Igf/bFs+yluOikt0eFNmXYnshrGBWPXr
oam0iumPox34vTzZnjpSjF6tJGxHWOgi+wbgIvbwOYHA/ONxx8akW580j+1VhEWa
X29VyUzjZBffgFtmlF4fM74/ELYm7s4c1a1/D9TpVP6Dr0fSWbMujbx4dfeVstvf
sONN+A8sVxaNdV9QKPE6BvqfMlPLoCiigrOetf6iY1KuUtkQDF8xDB0MdzdutqAQ
szAtQ0rrzjxDx9EuGN1SECFM1/riDUbtOOoA9g2C7gGKrx3/iUc6pzrkIcAfWLFK
xXbH7+6Wynia0cbUxnrvRdY4daMIxm4N3wUvN7szXgF9kxYxeQcsdgGsNA==
=n4lu
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fix WHPX debugging
* misc qga-vss fixes
* remove the deprecated CPU model 'Icelake-Client'
* support for x86 architectural LBR
* remove deprecated properties
* replace deprecated -soundhw with -audio
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ/hZ4UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN2Igf/bFs+yluOikt0eFNmXYnshrGBWPXr
# oam0iumPox34vTzZnjpSjF6tJGxHWOgi+wbgIvbwOYHA/ONxx8akW580j+1VhEWa
# X29VyUzjZBffgFtmlF4fM74/ELYm7s4c1a1/D9TpVP6Dr0fSWbMujbx4dfeVstvf
# sONN+A8sVxaNdV9QKPE6BvqfMlPLoCiigrOetf6iY1KuUtkQDF8xDB0MdzdutqAQ
# szAtQ0rrzjxDx9EuGN1SECFM1/riDUbtOOoA9g2C7gGKrx3/iUc6pzrkIcAfWLFK
# xXbH7+6Wynia0cbUxnrvRdY4daMIxm4N3wUvN7szXgF9kxYxeQcsdgGsNA==
# =n4lu
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 14 May 2022 03:34:06 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
configure: remove duplicate help messages
configure: remove another dead variable
build: remove useless dependency
introduce -audio as a replacement for -soundhw
soundhw: move help handling to vl.c
soundhw: unify initialization for ISA and PCI soundhw
soundhw: extract soundhw help to a separate function
soundhw: remove ability to create multiple soundcards
rng: make opened property read-only
crypto: make loaded property read-only
target/i386: Support Arch LBR in CPUID enumeration
target/i386: introduce helper to access supported CPUID
target/i386: Enable Arch LBR migration states in vmstate
target/i386: Add MSR access interface for Arch LBR
target/i386: Add XSAVES support for Arch LBR
target/i386: Enable support for XSAVES based features
target/i386: Add kvm_get_one_msr helper
target/i386: Add lbr-fmt vPMU option to support guest LBR
qdev-properties: Add a new macro with bitmask check for uint64_t property
i386/cpu: Remove the deprecated cpu model 'Icelake-Client'
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
virtio_queue_host_notifier_read() tends to read pending event
left behind on ioeventfd in the vhost_net_stop() path, and
attempts to handle outstanding kicks from userspace vq handler.
However, in the ctrl_vq handler, virtio_net_handle_mq() has a
recursive call into virtio_net_set_status(), which may lead to
segmentation fault as shown in below stack trace:
0 0x000055f800df1780 in qdev_get_parent_bus (dev=0x0) at ../hw/core/qdev.c:376
1 0x000055f800c68ad8 in virtio_bus_device_iommu_enabled (vdev=vdev@entry=0x0) at ../hw/virtio/virtio-bus.c:331
2 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>) at ../hw/virtio/vhost.c:318
3 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>, buffer=0x7fc19bec5240, len=2052, is_write=1, access_len=2052) at ../hw/virtio/vhost.c:336
4 0x000055f800d71867 in vhost_virtqueue_stop (dev=dev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590, vq=0x55f8037cceb0, idx=0) at ../hw/virtio/vhost.c:1241
5 0x000055f800d7406c in vhost_dev_stop (hdev=hdev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590) at ../hw/virtio/vhost.c:1839
6 0x000055f800bf00a7 in vhost_net_stop_one (net=0x55f8037ccc30, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:315
7 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1)
at ../hw/net/vhost_net.c:423
8 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296
9 0x000055f800d4e628 in virtio_net_set_status (vdev=vdev@entry=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370
10 0x000055f800d534d8 in virtio_net_handle_ctrl (iov_cnt=<optimized out>, iov=<optimized out>, cmd=0 '\000', n=0x55f8044ec590) at ../hw/net/virtio-net.c:1408
11 0x000055f800d534d8 in virtio_net_handle_ctrl (vdev=0x55f8044ec590, vq=0x7fc1a7e888d0) at ../hw/net/virtio-net.c:1452
12 0x000055f800d69f37 in virtio_queue_host_notifier_read (vq=0x7fc1a7e888d0) at ../hw/virtio/virtio.c:2331
13 0x000055f800d69f37 in virtio_queue_host_notifier_read (n=n@entry=0x7fc1a7e8894c) at ../hw/virtio/virtio.c:3575
14 0x000055f800c688e6 in virtio_bus_cleanup_host_notifier (bus=<optimized out>, n=n@entry=14) at ../hw/virtio/virtio-bus.c:312
15 0x000055f800d73106 in vhost_dev_disable_notifiers (hdev=hdev@entry=0x55f8035b51b0, vdev=vdev@entry=0x55f8044ec590)
at ../../../include/hw/virtio/virtio-bus.h:35
16 0x000055f800bf00b2 in vhost_net_stop_one (net=0x55f8035b51b0, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:316
17 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1)
at ../hw/net/vhost_net.c:423
18 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296
19 0x000055f800d4e628 in virtio_net_set_status (vdev=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370
20 0x000055f800d6c4b2 in virtio_set_status (vdev=0x55f8044ec590, val=<optimized out>) at ../hw/virtio/virtio.c:1945
21 0x000055f800d11d9d in vm_state_notify (running=running@entry=false, state=state@entry=RUN_STATE_SHUTDOWN) at ../softmmu/runstate.c:333
22 0x000055f800d04e7a in do_vm_stop (state=state@entry=RUN_STATE_SHUTDOWN, send_stop=send_stop@entry=false) at ../softmmu/cpus.c:262
23 0x000055f800d04e99 in vm_shutdown () at ../softmmu/cpus.c:280
24 0x000055f800d126af in qemu_cleanup () at ../softmmu/runstate.c:812
25 0x000055f800ad5b13 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51
For now, temporarily disable handling MQ request from the ctrl_vq
userspace hanlder to avoid the recursive virtio_net_set_status()
call. Some rework is needed to allow changing the number of
queues without going through a full virtio_net_set_status cycle,
particularly for vhost-vdpa backend.
This patch will need to be reverted as soon as future patches of
having the change of #queues handled in userspace is merged.
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-8-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The name vhost_vdpa_one_time_request() was confusing. No
matter whatever it returns, its typical occurrence had
always been at requests that only need to be applied once.
And the name didn't suggest what it actually checks for.
Change it to vhost_vdpa_first_dev() with polarity flipped
for better readibility of code. That way it is able to
reflect what the check is really about.
This call is applicable to request which performs operation
only once, before queues are set up, and usually at the beginning
of the caller function. Document the requirement for it in place.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1651890498-24478-7-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The vhost_vdpa_one_time_request() branch in
vhost_vdpa_set_backend_cap() incorrectly sends down
ioctls on vhost_dev with non-zero index. This may
end up with multiple VHOST_SET_BACKEND_FEATURES
ioctl calls sent down on the vhost-vdpa fd that is
shared between all these vhost_dev's.
To fix it, send down ioctl only once via the first
vhost_dev with index 0. Toggle the polarity of the
vhost_vdpa_one_time_request() test should do the
trick.
Fixes: 4d191cfdc7 ("vhost-vdpa: classify one time request")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1651890498-24478-6-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_net_start() missed a corresponding stop_one() upon error from
vhost_set_vring_enable(). While at it, make the error handling for
err_start more robust. No real issue was found due to this though.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-5-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With MQ enabled vdpa device and non-MQ supporting guest e.g.
booting vdpa with mq=on over OVMF of single vqp, below assert
failure is seen:
../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed.
0 0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6
1 0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6
2 0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6
3 0x00007f8ce3fec252 in () at /lib64/libc.so.6
4 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563
5 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558
6 0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557
7 0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false)
at ../hw/virtio/virtio-pci.c:974
8 0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019
9 0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1)
at ../hw/net/vhost_net.c:361
10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289
11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370
12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945
13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292
14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...)
at ../softmmu/memory.c:492
15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554
16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...)
at ../softmmu/memory.c:1504
17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165
18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822
19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>)
at ../softmmu/physmem.c:2914
20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=...,
attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924
21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903
22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49
23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556
24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0
25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6
The cause for the assert failure is due to that the vhost_dev index
for the ctrl vq was not aligned with actual one in use by the guest.
Upon multiqueue feature negotiation in virtio_net_set_multiqueue(),
if guest doesn't support multiqueue, the guest vq layout would shrink
to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl).
This results in ctrl_vq taking a different vhost_dev group index than
the default. We can map vq to the correct vhost_dev group by checking
if MQ is supported by guest and successfully negotiated. Since the
MQ feature is only present along with CTRL_VQ, we ensure the index
2 is only meant for the control vq while MQ is not supported by guest.
Fixes: 22288fe ("virtio-net: vhost control virtqueue support")
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the control virtqueue feature is absent or not negotiated,
vhost_net_start() still tries to set up vhost_dev and install
vhost notifiers for the control virtqueue, which results in
erroneous ioctl calls with incorrect queue index sending down
to driver. Do that only when needed.
Fixes: 22288fe ("virtio-net: vhost control virtqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity issues several UNINIT warnings against amd_iommu.c [1]. This
patch fixes them by clearing evt before encoding. On top of it, this
patch changes the event log size to 16 bytes per IOMMU specification,
and fixes the event log entry format in amdvi_encode_event().
[1] CID 1487116/1487200/1487190/1487232/1487115/1487258
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20220422055146.3312226-1-wei.huang2@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy PIC (8259) cannot be supported for TDX guests since TDX module
doesn't allow directly interrupt injection. Using posted interrupts
for the PIC is not a viable option as the guest BIOS/kernel will not
do EOI for PIC IRQs, i.e. will leave the vIRR bit set.
Make PIC the property of common x86 machine type. Hence all x86
machines, including microvm, can disable it.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-3-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both pc and microvm have pit property individually. Let's just make it
the property of common x86 base machine type.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-2-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The X cursor postion can be calculated based on the backporch and
interleave values. In the emulation we ignore the HP-UX settings for
backporch and use instead twice the size of the emulated cursor. With
those changes the X-position of the graphics cursor is now finally
working correctly on HP-UX 10 and HP-UX 11.
Based on coding in Xorg X11R6.6
Signed-off-by: Helge Deller <deller@gmx.de>
The misc_video and misc_ctrl registers control the visibility of the
screen. Start with the screen turned on, and hide or show the screen
based on the control registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Bit 0x80 in the cursor_cntrl register specifies if the cursor
should be visible. Prevent rendering the cursor if it's invisible.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Drop the hard-coded value of 1146 lines which seems to work with HP-UX
11, but not with HP-UX 10. Instead encode the screen height in byte 0 of
active_lines_low and byte 3 of misc_video as it's expected by the Xorg
X11 graphics driver.
This potentially allows for higher vertical screen resolutions than
1280x1024 with X11.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Convert the variable names of some registers to human-readable and
understandable names.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add the constant NGLE_MAX_SPRITE_SIZE which defines the currently
maximum supported cursor size.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add flags to io_writev and introduce io_flush as optional callback to
QIOChannelClass, allowing the implementation of zero copy writes by
subclasses.
How to use them:
- Write data using qio_channel_writev*(...,QIO_CHANNEL_WRITE_FLAG_ZERO_COPY),
- Wait write completion with qio_channel_flush().
Notes:
As some zero copy write implementations work asynchronously, it's
recommended to keep the write buffer untouched until the return of
qio_channel_flush(), to avoid the risk of sending an updated buffer
instead of the buffer state during write.
As io_flush callback is optional, if a subclass does not implement it, then:
- io_flush will return 0 without changing anything.
Also, some functions like qio_channel_writev_full_all() were adapted to
receive a flag parameter. That allows shared code between zero copy and
non-zero copy writev, and also an easier implementation on new flags.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220513062836.965425-3-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.
Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch drops the name parameter for the virtio_init function.
The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.
This patch lets us do this and removes the need for the name
parameter in the virtio_init function.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At a couple of hundred bytes per notifier allocating one for every
potential queue is very wasteful as most devices only have a few
queues. Instead of having this handled statically dynamically assign
them and track in a GPtrArray.
[AJB: it's hard to trigger the vhost notifiers code, I assume as it
requires a KVM guest with appropriate backend]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-14-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.
Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.
Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are useful when trying to debug the initial vhost-user
negotiation, especially when it hard to get logging from the low level
library on the other side.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200925125147.26943-6-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-3-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows other device classes that will be exposed via PCI to be
able to do so in the appropriate hw/ directory. I resisted the
temptation to re-order headers to be more aesthetically pleasing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200925125147.26943-4-alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"0x200000000" is much more readable than "8589934592".
The change saves one step (conversion) while debugging.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20220318140440.596019-1-i.maximets@ovn.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We need to update iq_dw according to the DMA_IRQ_REG during post
load. Otherwise we may get wrong IOTLB invalidation descriptor after
migration.
Fixes: fb43cf739e ("intel_iommu: scalable mode emulation")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220317080522.14621-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We need check whether passthrough is enabled during
vtd_switch_address_space() by checking the context entries. This
requires the root_scalable to be set correctly otherwise we may try to
check legacy rsvd bits instead of scalable ones.
Fixing this by updating root_scalable before switching the address
spaces during post_load.
Fixes: fb43cf739e ("intel_iommu: scalable mode emulation")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220317080522.14621-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
According to vtd spec v3.3 3.14:
"""
Software must not program paging-structure entries to remap any
address to the interrupt address range. Untranslated requests and
translation requests that result in an address in the interrupt range
will be blocked with condition code LGN.4 or SGN.8.
"""
This patch blocks the request that result in interrupt address range.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220210092815.45174-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
This fault reason is not used and is duplicated with SPT.2 condition
code. So let's remove it.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220210092815.45174-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We don't need to check kvm_enable_x2apic(). It's perfectly OK to support
interrupt remapping even if we can't address CPUs above 254. Kind of
pointless, but still functional.
The check on kvm_enable_x2apic() needs to happen *anyway* in order to
allow CPUs above 254 even without an IOMMU, so allow that to happen
elsewhere.
However, we do require the *split* irqchip in order to rewrite I/OAPIC
destinations. So fix that check while we're here.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20220314142544.150555-4-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should probably check if we were meant to be exposing IR, before
letting the guest turn the IRE bit on.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220314142544.150555-3-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By setting none of the SAGAW bits we can indicate to a guest that DMA
translation isn't supported. Tested by booting Windows 10, as well as
Linux guests with the fix at https://git.kernel.org/torvalds/c/c40aaaac10
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220314142544.150555-2-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The check on x86ms->apic_id_limit in pc_machine_done() had two problems.
Firstly, we need KVM to support the X2APIC API in order to allow IRQ
delivery to APICs >= 255. So we need to call/check kvm_enable_x2apic(),
which was done elsewhere in *some* cases but not all.
Secondly, microvm needs the same check. So move it from pc_machine_done()
to x86_cpus_init() where it will work for both.
The check in kvm_cpu_instance_init() is now redundant and can be dropped.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20220314142544.150555-1-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- A few or1ksim fixes and enhancements
- A fix for OpenRISC tcg backend around delay slot handling
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmKAWKsACgkQw7McLV5m
J+SoFg/8Dlrc2BqjjXw9gpaQ18+3BRI6dMVPqHA22VJks88gykH7UWLUbrCxtKnS
SBcIcpzu17nKDdfwYWndqCr0UBM/zM3JzFrTv4QEhTEg6Np7lSM2KVNEhjBPVGoW
A7QOjPFrwItWOfAx6hrcczpj+L50iKuWeMW0XnEfqSeDYisxZcSp2yMoe5h3y7bF
tlpo+ha/ir/fd2kMlFrQlPWYiWkWM05RLJJOlXhdRMF7hrW5qlHqEB/SVykUTf7V
6fqOFvY6r3vE5OFm0Scgf/k2AJIxwV8qXkBJ5/egv+ZqUidZBQ9nXtOw++vF2AWp
eKoU2/c2XIxiF1Xdpgdi6a/CxlLqrr9jraQROB3GpaL9zGQvd//wUCg0F+QLicLv
avq4lvNmnat89aXj1DQ+DWpLy0zaZFGmxsPR+KeBJ2wkuEJ3Vd4+uiuAyXnm9M8D
wEE8mgFQYsTL1WlgHF4uNTDIx8OLS+4gYlBE3tffRksxyLLwzKHHgAfLdNZvhfx8
QZBuPy+yyO8zjr3RUVUArBs/ukZHP1QwDE6uxmPKV34tvVEbFVeSFY3a1LmYV3w5
mZNALNqf+h5Dq5Qo7f7cGNMrzhL53GTWPNX0MK5+SBDZF3/fpPZyvCr4Zd69Z5tD
+YClfWBv8HPjdUf+IFHqyE8rURw/sgNvgB76GpalwcUYXRr7zTM=
=tmP4
-----END PGP SIGNATURE-----
Merge tag 'or1k-pull-request-20220515' of https://github.com/stffrdhrn/qemu into staging
OpenRISC Fixes for 7.0
- A few or1ksim fixes and enhancements
- A fix for OpenRISC tcg backend around delay slot handling
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmKAWKsACgkQw7McLV5m
# J+SoFg/8Dlrc2BqjjXw9gpaQ18+3BRI6dMVPqHA22VJks88gykH7UWLUbrCxtKnS
# SBcIcpzu17nKDdfwYWndqCr0UBM/zM3JzFrTv4QEhTEg6Np7lSM2KVNEhjBPVGoW
# A7QOjPFrwItWOfAx6hrcczpj+L50iKuWeMW0XnEfqSeDYisxZcSp2yMoe5h3y7bF
# tlpo+ha/ir/fd2kMlFrQlPWYiWkWM05RLJJOlXhdRMF7hrW5qlHqEB/SVykUTf7V
# 6fqOFvY6r3vE5OFm0Scgf/k2AJIxwV8qXkBJ5/egv+ZqUidZBQ9nXtOw++vF2AWp
# eKoU2/c2XIxiF1Xdpgdi6a/CxlLqrr9jraQROB3GpaL9zGQvd//wUCg0F+QLicLv
# avq4lvNmnat89aXj1DQ+DWpLy0zaZFGmxsPR+KeBJ2wkuEJ3Vd4+uiuAyXnm9M8D
# wEE8mgFQYsTL1WlgHF4uNTDIx8OLS+4gYlBE3tffRksxyLLwzKHHgAfLdNZvhfx8
# QZBuPy+yyO8zjr3RUVUArBs/ukZHP1QwDE6uxmPKV34tvVEbFVeSFY3a1LmYV3w5
# mZNALNqf+h5Dq5Qo7f7cGNMrzhL53GTWPNX0MK5+SBDZF3/fpPZyvCr4Zd69Z5tD
# +YClfWBv8HPjdUf+IFHqyE8rURw/sgNvgB76GpalwcUYXRr7zTM=
# =tmP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 14 May 2022 06:34:35 PM PDT
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'or1k-pull-request-20220515' of https://github.com/stffrdhrn/qemu:
target/openrisc: Do not reset delay slot flag on early tb exit
hw/openrisc: use right OMPIC size variable
hw/openrisc: support 4 serial ports in or1ksim
hw/openrisc: page-align FDT address
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This appears to be a copy and paste error. The UART size was used
instead of the much smaller OMPIC size. But actually that smaller OMPIC
size is wrong too and doesn't allow the IPI to work in Linux. So set it
to the old value.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[smh:Updated OR1KSIM_OMPIC size to use OR1KSIM_CPUS_MAX]
Signed-off-by: Stafford Horne <shorne@gmail.com>
The 8250 serial controller supports 4 serial ports, so wire them all up,
so that we can have more than one basic I/O channel.
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[smh:Fixup indentation and lines over 80 chars]
Signed-off-by: Stafford Horne <shorne@gmail.com>
-audio is used like "-audio pa,model=sb16". It is almost as simple as
-soundhw, but it reuses the -audiodev parsing machinery and attaches an
audiodev to the newly-created device. The main 'feature' is that
it knows about adding the codec device for model=intel-hda, and adding
the audiodev to the codec device.
In the future, it could be extended to support default models or
builtin devices, just like -nic, or even a default backend. For now,
keep it simple.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The usefulness of enabling a dozen soundcards is dubious. Simplify the
code by allowing a single instance of -soundhw, with no support for
parsing either comma-separated values or 'soundhw all'.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DEFINE_PROP_UINT64_CHECKMASK maro applies certain mask check agaist
user-supplied property value, reject the value if it violates the bitmask.
Co-developed-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-2-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update to c5eb0a61238d ("Linux 5.18-rc6"). Mechanical search and
replace of vfio defines with white space massaging.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Coverity rightly reports that is not free in that case.
Fixes: Coverity CID 1487559
Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-7-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
