Add emulation of TP4146 ("Flexible Data Placement").
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jesper Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for the Directive Send and Recv commands and the Identify
directive.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the mandatory Endurance Group identify data structures and log
pages.
For now, all namespaces in a subsystem belongs to a single Endurance
Group.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Fedora 39 will ship its arm64 kernels in the new generic EFI zboot
format, using gzip compression for the payload.
For doing EFI boot in QEMU, this is completely transparent, as the
firmware or bootloader will take care of this. However, for direct
kernel boot without firmware, we will lose the ability to boot such
distro kernels unless we deal with the new format directly.
EFI zboot images contain metadata in the header regarding the placement
of the compressed payload inside the image, and the type of compression
used. This means we can wire up the existing gzip support without too
much hassle, by parsing the header and grabbing the payload from inside
the loaded zboot image.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20230303160109.3626966-1-ardb@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked comment formatting, fixed checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since all temps allocated by guest front-ends are now TEMP_TB,
and we don't recycle TEMP_TB, there's no point in requiring
that the front-ends free the temps at all. Begin by dropping
the inner-most checks that all temps have been freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the two uses of asm to expand xgetbv with an inline function.
Since one of the two has been using the mnemonic, assume that the
comment about "older versions of the assember" is obsolete, as even
that is 4 years old.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Atomic operations are read-modify-write, and we'd like to
be able to test both read and write with one call. This is
easy enough, with BP_MEM_READ | BP_MEM_WRITE.
Add BP_HIT_SHIFT to make it easy to set BP_WATCHPOINT_HIT_*.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This allows us to easily find all branches that use a label.
Since 'refs' is only tested vs zero, remove it and test for
an empty list instead. Drop the use of bitfields, which had
been used to pack refs into a single 32-bit word.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This queue includes a stub implementation for the dcblc instruction to
avoid an illegal instrunction exception when using u-boot with mpc85xx.
It also includes a PHB fix with user-created pnv-phb devices and
Skiboot.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZAJllhYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFk02YA/2YnJl0aRw6hgiayI2rLbcwQcVfp
oGAhh4QmqFL2UJw2AQDra0kh9sxBSEcqhltNnOa08tBnHPts3W/A8nmFtCd4Cw==
=VRNM
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230303' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-03-03:
This queue includes a stub implementation for the dcblc instruction to
avoid an illegal instrunction exception when using u-boot with mpc85xx.
It also includes a PHB fix with user-created pnv-phb devices and
Skiboot.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZAJllhYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFk02YA/2YnJl0aRw6hgiayI2rLbcwQcVfp
# oGAhh4QmqFL2UJw2AQDra0kh9sxBSEcqhltNnOa08tBnHPts3W/A8nmFtCd4Cw==
# =VRNM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 21:24:38 GMT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230303' of https://gitlab.com/danielhb/qemu:
pnv_phb4_pec: Simplify/align code to parent user-created PHBs
pnv_phb4_pec: Move pnv_phb4_get_pec() to rightful file
pnv_phb4_pec: Only export existing PHBs to the device tree
pnv_phb4_pec: Keep track of instantiated PHBs
target/ppc/translate: Add dummy implementation for dcblc instruction
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When instantiating a user-created PHB on P9/P10, we don't really have
a reason any more to go through an indirection in pnv_chip_add_phb()
in pnv.c, we can go straight to the right function in
pnv_phb4_pec.c. That way, default PHBs and user-created PHBs are all
handled in the same file. This patch also renames pnv_phb4_get_pec()
to pnv_pec_add_phb() to better reflect that it "hooks" a PHB to a PEC.
For P8, the PHBs are parented to the chip directly, so it makes sense
to keep calling pnv_chip_add_phb() in pnv.c, to also be consistent
with where default PHBs are handled. The only change here is that,
since that function is now only used for P8, we can refine the return
type.
So overall, the PnvPHB front-end now has a pnv_phb_user_get_parent()
function which handles the parenting of the user-created PHBs by
calling the right function in the right file based on the processor
version. It's also easily extensible if we ever need to support a
different parent object.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-5-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function pnv_phb4_get_pec() exposes some internals of the PEC and
PHB logic, yet it was in the higher level hw/ppc/pnv.c file for
historical reasons: P8 implements the PHBs from pnv.c directly, but on
P9/P10, it's done through the CEC model, which has its own file. So
move pnv_phb4_get_pec() to hw/pci-host/pnv_phb4_pec.c, where it fits
naturally.
While at it, replace the PnvPHB4 parameter by the PnvPHB front-end,
since it has all the information needed and simplify it a bit.
No functional changes.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-4-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add an array on the PEC object to keep track of the PHBs which are
instantiated. The array can be sparsely populated when using
user-created PHBs. It will be useful for the next patch to only export
instantiated PHBs in the device tree.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
-----BEGIN PGP SIGNATURE-----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=ExnJ
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu into staging
aspeed queue:
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQAnrQACgkQUaNDx8/7
# 7KGIvQ//Te2eSxlZNxAXHb3HSVFRaBW+2EkJzNlalX75olFSzCLe8BnAHK5xPlYv
# JjU0aPjWaPohPLdbNbAsJY2B8AwMGbUTjSv+ORRWF6s97LTVD9WcAYHgOTCz6d2X
# ZrArJ5msEQAFEySOLmBqTcuyW3t4w8XeII+B09HZIS8Gn3F9kX5+4JCw9E4sX8fS
# n9ayclMmrXCPbkGA4bfwJp3KI1Tc/WXNRyG0AmPEmepid7ECr5tVvQoXRMF1Sy/D
# 10qbHEcmQXvZDy85M2ED1niOac4oU+EY8Wvjzkgc36uXcjqf0jIUfw56cwGSNVkW
# MhPXSMiH4tEjgxmtzld3LeA6TGfrFcCvRXYiCuYWHjBS3gptlqY6Q0580vxoQVXL
# lTYui57LB1YStNLcLG9toP0d4/fRfeqEx7ddCQKlopnW/K392eoJo0aYoVGVJhIC
# 3QhN525EFUwMm4FDpdSW29Gfbk/ytpf0u4hQ6JPeBl8psirRKqCGuwr5NOnPYTaN
# yErlsq2eL83t9kLo+2YIqgWic85wNP3kqAjIaE6lminqX7sWFH3V1g9HqUQZVG1g
# msatZMiCCvwSFuz3DPkSfnuhqwaHuhvCATZloCtguCmnbUK9qUVVzvodKw62sZrd
# GdS2XvRNyoOwezz0tDEvPipyZ7RpcaatryHNuzGwRsE5Lvr73dg=
# =ExnJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Mar 2023 13:03:48 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu:
aspeed/smc: Replace SysBus IRQs with GPIO lines
aspeed: Add a boot_rom overlap region in the SoC spi_boot container
aspeed: Introduce a spi_boot region under the SoC
aspeed/fuji : correct the eeprom size
hw/at24c : modify at24c to support 1 byte address mode
hw/arm/aspeed: Adding new machine Tiogapass in QEMU
hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU
tests/avocado/machine_aspeed.py: Add an I2C slave test
hw/misc: add a toy i2c echo device
hw/i2c: only schedule pending master when bus is idle
readline: fix hmp completion issue
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZAFb5wAKCRBAov/yOSY+
35hmA/sHIGXU5zQV6p6DBILFGEE6x91sPtV8WKY3zujVY0hsfD4SF6bKTaKJYisZ
EztZZ5/EunQcu/vfgO46YtYysEWzrzGiinbZ5lAjxk6sdlBYlfcTQLAQEEW3zPbP
qB3SiiGmGQ0iYFHIlkyi1tCF5OEmqqQKrHYrNVk6cGBoJle2PA==
=giPH
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20230303' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20230303
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZAFb5wAKCRBAov/yOSY+
# 35hmA/sHIGXU5zQV6p6DBILFGEE6x91sPtV8WKY3zujVY0hsfD4SF6bKTaKJYisZ
# EztZZ5/EunQcu/vfgO46YtYysEWzrzGiinbZ5lAjxk6sdlBYlfcTQLAQEEW3zPbP
# qB3SiiGmGQ0iYFHIlkyi1tCF5OEmqqQKrHYrNVk6cGBoJle2PA==
# =giPH
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 02:31:03 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230303' of https://gitlab.com/gaosong/qemu:
hw/loongarch/virt: add system_powerdown hmp command support
target/loongarch: Implement Chip Configuraiton Version Register(0x0000)
docs/system/loongarch: update loongson3.rst and rename it to virt.rst
loongarch: Add smbios command line option.
hw/loongarch/virt: rename PCH_PIC_IRQ_OFFSET with VIRT_GSI_BASE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
=hN3h
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
# lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
# cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
# 0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
# UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
# f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
# =hN3h
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 00:13:56 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
tests/data/acpi/virt: drop (most) duplicate files.
hw/cxl/mailbox: Use new UUID network order define for cel_uuid
qemu/uuid: Add UUID static initializer
qemu/bswap: Add const_le64()
tests: acpi: Update q35/DSDT.cxl for removed duplicate UID
hw/i386/acpi: Drop duplicate _UID entry for CXL root bridge
tests/acpi: Allow update of q35/DSDT.cxl
hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
hw/pci-bridge/cxl_downstream: Fix type naming mismatch
hw/mem/cxl_type3: Improve error handling in realize()
MAINTAINERS: Add Fan Ni as Compute eXpress Link QEMU reviewer
intel-iommu: send UNMAP notifications for domain or global inv desc
smmu: switch to use memory_region_unmap_iommu_notifier_range()
memory: introduce memory_region_unmap_iommu_notifier_range()
intel-iommu: fail DEVIOTLB_UNMAP without dt mode
intel-iommu: fail MAP notifier without caching mode
memory: Optimize replay of guest mapping
chardev/char-socket: set s->listener = NULL in char_socket_finalize
hw/pci: Trace IRQ routing on PCI topology
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
-----BEGIN PGP SIGNATURE-----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=FMkl
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu into staging
Fifth RISC-V PR for QEMU 8.0
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQBrrUTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYicHrD/9dHBDOYNwyT/C2Q31NHMcEsVN6J0kW
# 0sVyDb2/TUFoXmClMwS6jZYQQwWD7tjjB7BDcvPJ0QKLblDoZFX5JyxpQypIKWcs
# It/E6mk7aG0epH1GoB/mbHFDbeCm4tbo7Vf6cQGpV/vGWBUaOS67c5nenUK7Tlqw
# NTr9qak+9NYVswvMHZ0lUKtO12W1g/1EVkict2/90P2snWbPZ+foWomifGNljmhy
# 5WtCNp27uBKF/uuD9xubLOxSEcqtZFTuKJy7U3azV4I0IKfd6Is83Kd0IwBOrTgT
# MYkFdtQE1jgbkXYVZjft6ymLuqJrcLFYwD8C2zdNAXJLk1Y+MCtGafgW6f6SkT6B
# FrNaSOqQ9xXiaNStF2FwYdmZ476zcY+eEg2rH1grTwCMewZ9r7m3+H8iat/tR0pt
# 9scYAre1oaL33LB6DGZi3JkssNYyj42sutcNao2hQXRHcsh+vv1dLR+Di2mO6Ji5
# MNfvEgCrWWZjNVSwvhwCXdJPqqpyTbkRf8HJEp0gWvjk6VoF8sWidDw/8oMLj+wW
# qZur7GNe+piJNvly85aFSL9J3SX7RyNeDzX/yK3b4k+g6I/ZziQaNgQtB9gYcm6w
# mj3snCwRbEMEhdhPH0+Chm0Wb97knHJS14Vq9wCe2xh16o3HM5FspboLFkGZMjDV
# tRDPFb7pitwdlA==
# =FMkl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 08:24:21 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu: (59 commits)
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfig
target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointers
target/riscv/csr.c: simplify mctr()
target/riscv/csr.c: use env_archcpu() in ctr()
target/riscv: Export Svadu property
target/riscv: Add *envcfg.HADE related check in address translation
target/riscv: Add *envcfg.PBMTE related check in address translation
target/riscv: Add csr support for svadu
target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and henvcfg
target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and Svpbmt/Sstc extensions
hw/riscv: Move the dtb load bits outside of create_fdt()
hw/riscv: Skip re-generating DT nodes for a given DTB
target/riscv: Add support for Zicond extension
RISC-V: XTheadMemPair: Remove register restrictions for store-pair
target/riscv: Fix checking of whether instruciton at 'pc_next' spans pages
target/riscv: Group all predicate() routines together
target/riscv: Drop priv level check in mseccfg predicate()
target/riscv: Allow debugger to access sstc CSRs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For loongarch virt machine, add powerdown notification callback
and send ACPI_POWER_DOWN_STATUS event by acpi ged. Also add
acpi dsdt table for ACPI_POWER_BUTTON_DEVICE device in this
patch.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230303010548.295580-1-gaosong@loongson.cn>
In theory gsi base can start from 0 on loongarch virt machine,
however gsi base is hard-coded in linux kernel loongarch system,
else system fails to boot.
This patch renames macro PCH_PIC_IRQ_OFFSET with VIRT_GSI_BASE,
keeps value unchanged. GSI base is common concept in acpi spec
and easy to understand.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221228030719.991878-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The cel_uuid was programatically generated previously because there was
no static initializer for network order UUIDs.
Use the new network order initializer for cel_uuid. Adjust
cxl_initialize_mailbox() because it can't fail now.
Update specification reference.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-11-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
UUID's are defined as network byte order fields. No static initializer
was available for UUID's in their standard big endian format.
Define a big endian initializer for UUIDs.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gcc requires constant versions of cpu_to_le* calls.
Add a 64 bit version.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a new helper to unmap the range of a specific
IOMMU notifier.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-4-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The default boot address of the Aspeed SoCs is 0x0. For this reason,
the FMC flash device contents are remapped by HW on the first 256MB of
the address space. In QEMU, this is currently done in the machine init
with the setup of a region alias.
Move this code to the SoC and introduce an extra container to prepare
ground for the boot ROM region which will overlap the FMC flash
remapping.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It is not given that the current master will release the bus after a
transfer ends. Only schedule a pending master if the bus is idle.
Fixes: 37fa5ca426 ("hw/i2c: support multiple masters")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20221116084312.35808-2-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The structure type is unused. Also, it's the only user of corresponding
macros, so drop them too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-10-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have indicator values in
include/standard-headers/linux/pci_regs.h , no reason to reinvent them
in include/hw/pci/pcie_regs.h. (and we already have usage of
PCI_EXP_SLTCTL_PWR_IND_BLINK and PCI_EXP_SLTCTL_PWR_IND_OFF in
hw/pci/pcie.c, so let's be consistent)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-9-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_cleanup(), called from vu_gpio_disconnect(), clears vhost_dev
so vhost-user-gpio must set the members of vhost_dev each time
connecting.
do_vhost_user_cleanup() should also acquire the pointer to vqs directly
from VHostUserGPIO instead of referring to vhost_dev as it can be called
after vhost_dev_cleanup().
Fixes: 27ba7b027f ("hw/virtio: add boilerplate for vhost-user-gpio device")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140320.77999-1-akihiko.odaki@daynix.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 67f7e426e5.
Additionally to the automatic revert, I went over the code
and dropped all mentions of legacy_no_rng_seed manually,
effectively reverting a combination of 2 additional commits:
commit ffe2d2382e
Author: Jason A. Donenfeld <Jason@zx2c4.com>
Date: Wed Sep 21 11:31:34 2022 +0200
x86: re-enable rng seeding via SetupData
commit 3824e25db1
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Aug 17 10:39:40 2022 +0200
x86: disable rng seeding via setup_data
Fixes: 67f7e426e5 ("hw/i386: pass RNG seed via setup_data entry")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit e935b73508.
Fixes: e935b73508 ("x86: return modified setup_data only if read as memory, not as file")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit eac7a7791b.
Fixes: eac7a7791b ("x86: don't let decompressed kernel image clobber setup_data")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move the dtb load bits outside of create_fdt(), and put it explicitly
in sifive_u_machine_init() and virt_machine_init(). With such change
create_fdt() does exactly what its function name tells us.
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-2-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since tcg_temp_new_i32 is now identical, use that.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Guest front-ends now get temps that span the lifetime of
the translation block by default, which avoids accidentally
using the temp across branches and invalidating the data.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reusing TEMP_TB interferes with detecting whether the
temp can be adjusted to TEMP_EBB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG internals will want to be able to allocate and reuse
explicitly life-limited temporaries.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While the argument can only be TEMP_EBB or TEMP_TB,
it's more obvious this way.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TEMP_NORMAL is a subset of TEMP_EBB. Promote single basic
block temps to single extended basic block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use TEMP_TB as that is more explicit about the default
lifetime of the data. While "global" and "local" used
to be contrasting, we have more lifetimes than that now.
Do not yet rename tcg_temp_local_new_*, just the enum.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-28-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-9-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adds a new field to TranslationBlock.cflags denoting whether or not the
instructions of a given translation block are pc-relative. This field
aims to replace the macro `TARGET_TB_PCREL`.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Every caller of xen_be_init() checks and exits on error, then calls
xen_be_register_common(). Just make xen_be_init() abort for itself and
return void, and register the common devices too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The default number of PIRQs is set to 256 to avoid issues with 32-bit MSI
devices. Allow it to be increased if the user desires.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The way that Xen handles MSI PIRQs is kind of awful.
There is a special MSI message which targets a PIRQ. The vector in the
low bits of data must be zero. The low 8 bits of the PIRQ# are in the
destination ID field, the extended destination ID field is unused, and
instead the high bits of the PIRQ# are in the high 32 bits of the address.
Using the high bits of the address means that we can't intercept and
translate these messages in kvm_send_msi(), because they won't be caught
by the APIC — addresses like 0x1000fee46000 aren't in the APIC's range.
So we catch them in pci_msi_trigger() instead, and deliver the event
channel directly.
That isn't even the worst part. The worst part is that Xen snoops on
writes to devices' MSI vectors while they are *masked*. When a MSI
message is written which looks like it targets a PIRQ, it remembers
the device and vector for later.
When the guest makes a hypercall to bind that PIRQ# (snooped from a
marked MSI vector) to an event channel port, Xen *unmasks* that MSI
vector on the device. Xen guests using PIRQ delivery of MSI don't
ever actually unmask the MSI for themselves.
Now that this is working we can finally enable XENFEAT_hvm_pirqs and
let the guest use it all.
Tested with passthrough igb and emulated e1000e + AHCI.
CPU0 CPU1
0: 65 0 IO-APIC 2-edge timer
1: 0 14 xen-pirq 1-ioapic-edge i8042
4: 0 846 xen-pirq 4-ioapic-edge ttyS0
8: 1 0 xen-pirq 8-ioapic-edge rtc0
9: 0 0 xen-pirq 9-ioapic-level acpi
12: 257 0 xen-pirq 12-ioapic-edge i8042
24: 9600 0 xen-percpu -virq timer0
25: 2758 0 xen-percpu -ipi resched0
26: 0 0 xen-percpu -ipi callfunc0
27: 0 0 xen-percpu -virq debug0
28: 1526 0 xen-percpu -ipi callfuncsingle0
29: 0 0 xen-percpu -ipi spinlock0
30: 0 8608 xen-percpu -virq timer1
31: 0 874 xen-percpu -ipi resched1
32: 0 0 xen-percpu -ipi callfunc1
33: 0 0 xen-percpu -virq debug1
34: 0 1617 xen-percpu -ipi callfuncsingle1
35: 0 0 xen-percpu -ipi spinlock1
36: 8 0 xen-dyn -event xenbus
37: 0 6046 xen-pirq -msi ahci[0000:00:03.0]
38: 1 0 xen-pirq -msi-x ens4
39: 0 73 xen-pirq -msi-x ens4-rx-0
40: 14 0 xen-pirq -msi-x ens4-rx-1
41: 0 32 xen-pirq -msi-x ens4-tx-0
42: 47 0 xen-pirq -msi-x ens4-tx-1
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Xen has eight frames at 0xfeff8000 for this; we only really need two for
now and KVM puts the identity map at 0xfeffc000, so limit ourselves to
four.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The GSI callback (and later PCI_INTX) is a level triggered interrupt. It
is asserted when an event channel is delivered to vCPU0, and is supposed
to be cleared when the vcpu_info->evtchn_upcall_pending field for vCPU0
is cleared again.
Thankfully, Xen does *not* assert the GSI if the guest sets its own
evtchn_upcall_pending field; we only need to assert the GSI when we
have delivered an event for ourselves. So that's the easy part, kind of.
There's a slight complexity in that we need to hold the BQL before we
can call qemu_set_irq(), and we definitely can't do that while holding
our own port_lock (because we'll need to take that from the qemu-side
functions that the PV backend drivers will call). So if we end up
wanting to set the IRQ in a context where we *don't* already hold the
BQL, defer to a BH.
However, we *do* need to poll for the evtchn_upcall_pending flag being
cleared. In an ideal world we would poll that when the EOI happens on
the PIC/IOAPIC. That's how it works in the kernel with the VFIO eventfd
pairs — one is used to trigger the interrupt, and the other works in the
other direction to 'resample' on EOI, and trigger the first eventfd
again if the line is still active.
However, QEMU doesn't seem to do that. Even VFIO level interrupts seem
to be supported by temporarily unmapping the device's BARs from the
guest when an interrupt happens, then trapping *all* MMIO to the device
and sending the 'resample' event on *every* MMIO access until the IRQ
is cleared! Maybe in future we'll plumb the 'resample' concept through
QEMU's irq framework but for now we'll do what Xen itself does: just
check the flag on every vmexit if the upcall GSI is known to be
asserted.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Specifically add listing, injection of event channels.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Add the array of virq ports to each vCPU so that we can deliver timers,
debug ports, etc. Global virqs are allocated against vCPU 0 initially,
but can be migrated to other vCPUs (when we implement that).
The kernel needs to know about VIRQ_TIMER in order to accelerate timers,
so tell it via KVM_XEN_VCPU_ATTR_TYPE_TIMER. Also save/restore the value
of the singleshot timer across migration, as the kernel will handle the
hypercalls automatically now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The kvm_xen_inject_vcpu_callback_vector() function will either deliver
the per-vCPU local APIC vector (as an MSI), or just kick the vCPU out
of the kernel to trigger KVM's automatic delivery of the global vector.
Support for asserting the GSI/PCI_INTX callbacks will come later.
Also add kvm_xen_get_vcpu_info_hva() which returns the vcpu_info of
a given vCPU.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The xen_overlay device (and later similar devices for event channels and
grant tables) need to be instantiated. Do this from a kvm_type method on
the PC machine derivatives, since KVM is only way to support Xen emulation
for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
For the shared info page and for grant tables, Xen shares its own pages
from the "Xen heap" to the guest. The guest requests that a given page
from a certain address space (XENMAPSPACE_shared_info, etc.) be mapped
to a given GPA using the XENMEM_add_to_physmap hypercall.
To support that in qemu when *emulating* Xen, create a memory region
(migratable) and allow it to be mapped as an overlay when requested.
Xen theoretically allows the same page to be mapped multiple times
into the guest, but that's hard to track and reinstate over migration,
so we automatically *unmap* any previous mapping when creating a new
one. This approach has been used in production with.... a non-trivial
number of guests expecting true Xen, without any problems yet being
noticed.
This adds just the shared info page for now. The grant tables will be
a larger region, and will need to be overlaid one page at a time. I
think that means I need to create separate aliases for each page of
the overall grant_frames region, so that they can be mapped individually.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
It allows to shutdown itself via hypercall with any of the 3 reasons:
1) self-reboot
2) shutdown
3) crash
Implementing SCHEDOP_shutdown sub op let us handle crashes gracefully rather
than leading to triple faults if it remains unimplemented.
In addition, the SHUTDOWN_soft_reset reason is used for kexec, to reset
Xen shared pages and other enlightenments and leave a clean slate for the
new kernel without the hypervisor helpfully writing information at
unexpected addresses.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Ditch sched_op_compat which was never available for HVM guests,
Add SCHEDOP_soft_reset]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This just initializes the basic Xen support in KVM for now. Only permitted
on TYPE_PC_MACHINE because that's where the sysbus devices for Xen heap
overlay, event channel, grant tables and other stuff will exist. There's
no point having the basic hypercall support if nothing else works.
Provide sysemu/kvm_xen.h and a kvm_xen_get_caps() which will be used
later by support devices.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Also set XEN_ATTACH mode in xen_init() to reflect the truth; not that
anyone ever cared before. It was *only* ever checked in xen_init_pv()
before.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
There's already a partial set here; update them and pull in a more
complete set.
To start with, define __XEN_TOOLS__ in hw/xen/xen.h to ensure that any
internal definitions needed by Xen toolstack libraries are present
regardless of the order in which the headers are included. A reckoning
will come later, once we make the PV backends work in emulation and
untangle the headers for Xen-native vs. generic parts.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Update to Xen public headers from 4.16.2 release, add some in io/,
define __XEN_TOOLS__ in hw/xen/xen.h, move to hw/xen/interface/]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Change to match the recent change to probe_access_flags.
All existing callers updated to supply 0, so no change in behaviour.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_flags() as it is today uses probe_access_full(), which in
turn uses probe_access_internal() with size = 0. probe_access_internal()
then uses the size to call the tlb_fill() callback for the given CPU.
This size param ('fault_size' as probe_access_internal() calls it) is
ignored by most existing .tlb_fill callback implementations, e.g.
arm_cpu_tlb_fill(), ppc_cpu_tlb_fill(), x86_cpu_tlb_fill() and
mips_cpu_tlb_fill() to name a few.
But RISC-V riscv_cpu_tlb_fill() actually uses it. The 'size' parameter
is used to check for PMP (Physical Memory Protection) access. This is
necessary because PMP does not make any guarantees about all the bytes
of the same page having the same permissions, i.e. the same page can
have different PMP properties, so we're forced to make sub-page range
checks. To allow RISC-V emulation to do a probe_acess_flags() that
covers PMP, we need to either add a 'size' param to the existing
probe_acess_flags() or create a new interface (e.g.
probe_access_range_flags).
There are quite a few probe_* APIs already, so let's add a 'size' param
to probe_access_flags() and re-use this API. This is done by open coding
what probe_access_full() does inside probe_acess_flags() and passing the
'size' param to probe_acess_internal(). Existing probe_access_flags()
callers use size = 0 to not change their current API usage. 'size' is
asserted to enforce single page access like probe_access() already does.
No behavioral changes intended.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230223234427.521114-2-dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
'dh_ctype_f32' is defined as 'float32', itself declared
in "fpu/softfloat-types.h". Include this header to avoid
when refactoring other headers:
In file included from include/exec/helper-proto.h:7,
from include/tcg/tcg-op.h:29,
from ../../tcg/tcg-op-vec.c:22:
include/exec/helper-head.h:44:22: error: unknown type name ‘float32’; did you mean ‘_Float32’?
44 | #define dh_ctype_f32 float32
| ^~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216225202.25664-1-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These legacy ISA IRQs allow the PIIX IDE functions to be wired up in
their south bridges and the VIA IDE functions to disuse
PCI_INTERRUPT_LINE as outlined in https://lists.nongnu.org/archive/html/qemu-devel/2020-03/msg01707.html
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230126211740.66874-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The function is only used inside ide/pci.c, so doesn't need to be exported.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-18-philmd@linaro.org>
ide_get_geometry() and ide_get_bios_chs_trans() are only
used by the TYPE_PC_MACHINE.
"hw/ide.h" is a mixed bag of lost IDE declarations. In order
to remove this (almost) pointless header soon, move these
declarations to "hw/ide/internal.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230220091358.17038-18-philmd@linaro.org>
idebus_active_if() operates on a IDEBus; rename it as
ide_bus_active_if() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/idebus_active_if/ide_bus_active_if/g' \
$(git grep -l idebus_active_if)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_init2() initializes a IDEBus, and set its output IRQ.
To emphasize this, rename it as ide_bus_init_output_irq().
Mechanical change using:
$ sed -i -e 's/ide_init2/ide_bus_init_output_irq/g' \
$(git grep -l ide_init2)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-15-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_exec_cmd() operates on a IDEBus; rename it as
ide_bus_exec_cmd() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_exec_cmd/ide_bus_exec_cmd/g' \
$(git grep -wl ide_exec_cmd)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-14-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_register_restart_cb() operates on a IDEBus; rename it as
ide_bus_register_restart_cb() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_register_restart_cb/ide_bus_register_restart_cb/g' \
$(git grep -l ide_register_restart_cb)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-13-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_create_drive() operates on a IDEBus; rename it as
ide_bus_create_drive() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_create_drive/ide_bus_create_drive/g' \
$(git grep -wl ide_create_drive)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-12-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_set_irq() operates on a IDEBus; rename it as
ide_bus_set_irq() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_set_irq/ide_bus_set_irq/g' \
$(git grep -l ide_set_irq)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-11-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Only include "hw/irq.h" where appropriate.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-10-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The IDEBus structure has PortioList fields, so we need its
declarations from "exec/ioport.h". "hw/isa/isa.h" is not required.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-9-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Missed in commit d7458e7754 ("hw/ide/internal: Remove unused
DMARestartFunc typedef") which removed the single use of RunState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-8-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Only atapi.c requires the SCSI constants. No need to include
it in all files including "hw/ide/internal.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-7-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
"hw/ide.h" is a mixed bag of lost IDE declarations.
Extract isa_ide_init() and the TYPE_ISA_IDE QOM declarations
to a new "hw/ide/isa.h" header.
Rename ISAIDEState::isairq as 'irqnum' to emphasize this is
not a qemu_irq object but the number (index) of an ISA IRQ.
Message-Id: <20230215112712.23110-5-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
"hw/ide.h" is a mixed bag of lost IDE declarations.
Extract mmio_ide_init_drives() and the TYPE_MMIO_IDE QOM
declarations to a new "hw/ide/mmio.h" header.
Document the SysBus interface.
Message-Id: <20230215112712.23110-4-philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
rtc_get_memory() and rtc_set_memory() helpers only work with
TYPE_MC146818_RTC devices. 'memory' in their name refer to
the CMOS region. Rename them as mc146818rtc_get_cmos_data()
and mc146818rtc_set_cmos_data() to be explicit about what
they are doing.
Mechanical change doing:
$ sed -i -e 's/rtc_set_memory/mc146818rtc_set_cmos_data/g' \
$(git grep -wl rtc_set_memory)
$ sed -i -e 's/rtc_get_memory/mc146818rtc_get_cmos_data/g' \
$(git grep -wl rtc_get_memory)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-4-philmd@linaro.org>
rtc_get_memory() and rtc_set_memory() methods can not take any
TYPE_ISA_DEVICE object. They expect a TYPE_MC146818_RTC one.
Simplify the API by passing a MC146818RtcState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-3-philmd@linaro.org>
RTCState only represents a Motorola MC146818 model,
not any RTC chipset. Rename the structure as MC146818RtcState
using:
$ sed -i -e s/RTCState/MC146818RtcState/g $(git grep -wl RTCState)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-4-philmd@linaro.org>
isa_get_irq() was added in commit 3a38d437ca
("Add isa_reserve_irq()" Fri Aug 14 11:36:15 2009) as:
a temporary interface to be used to allocate ISA IRQs for
devices which have not yet been converted to qdev, and for
special cases which are not suited for qdev conversions,
such as the 'ferr'.
We still use it 14 years later, using the global 'isabus'
singleton. In order to get rid of such *temporary* interface,
extract isa_bus_get_irq() which can take any ISABus* object.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-3-philmd@linaro.org>
isa_get_dma() returns a DMA channel handler from an ISABus.
To emphasize this, rename it as isa_bus_get_dma().
Mechanical change using:
$ sed -i -e 's/isa_get_dma/isa_bus_get_dma/g' \
$(git grep -l isa_get_dma)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-2-philmd@linaro.org>
isa_bus_irqs() register an array of input IRQs on
the ISA bus. Rename it as isa_bus_register_input_irqs().
Mechanical change using:
$ sed -i -e 's/isa_bus_irqs/isa_bus_register_input_irqs/g' \
$(git grep -wl isa_bus_irqs)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-10-philmd@linaro.org>
No point in inlining isa_bus_from_device() which is only
used at device realization time.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230210163744.32182-9-philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Separate functions taking an ISABus* argument versus
functions taking a ISADevice* one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-8-philmd@linaro.org>
ISADeviceClass is an empty class and just increase code
complexity. Remove it, directly embedding DeviceClass in
classes expanding TYPE_ISA_DEVICE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230215161641.32663-19-philmd@linaro.org>
i8259_init() helper creates a i8259 device on an ISA bus,
connects its IRQ output to the parent's input IRQ, and
returns an array of 16 ISA input IRQs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-2-philmd@linaro.org>
ICH9 is a south bridge which doesn't necessarily depend on x86, so move
it into the southbridge folder, analoguous to PIIX.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-13-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-12-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ioapic sources reside in hw/intc already. Move the headers there
as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-11-shentey@gmail.com>
[PMD: Keep ioapic_internal.h in hw/intc/, not under include/]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Most code uses IOAPIC_NUM_PINS. The only place where GSI_NUM_PINS defines
the size of an array is ICH9LPCState::gsi which needs to match
IOAPIC_NUM_PINS. Remove GSI_NUM_PINS for consistency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Make TYPE_ICH9_LPC_DEVICE more self-contained by moving the call to
ich9_lpc_pm_init() from board code to its realize function. In order
to propagate x86_machine_is_smm_enabled(), introduce an "smm-enabled"
property like we have in piix4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ich9_smb_init() is a legacy init function, so modernize the code.
Note that the smb_io_base parameter was unused.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
By using qdev_get_child_bus() we can eliminate ICH9LPCState::isa_bus and
spare the ich9_lpc variable in pc_q35, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
No need to rely on the board to wire up the ICH9 PCI IRQs. All functions
access private state of the LPC device which suggests that it should
wire up the IRQs.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The Q35_MASK macro is already defined by TYPE_Q35_HOST_DEVICE, so let
TYPE_ICH9_LPC_DEVICE have its own one to prevent potential name clash.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This function is not used anywhere outside this file, so
we can delete the prototype from include/hw/i386/x86.h and
make the function "static void".
This fixes when building with -Wall and using Clang
("Apple clang version 14.0.0 (clang-1400.0.29.202)"):
../hw/i386/x86.c:70:24: error: static function 'MACHINE' is used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
MachineState *ms = MACHINE(x86ms);
^
include/hw/i386/x86.h:101:1: note: use 'static' to give inline function 'init_topo_info' internal linkage
void init_topo_info(X86CPUTopoInfo *topo_info, const X86MachineState *x86ms);
^
static
include/hw/boards.h:24:49: note: 'MACHINE' declared here
OBJECT_DECLARE_TYPE(MachineState, MachineClass, MACHINE)
^
Reported-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216220158.6317-6-philmd@linaro.org>
Copy part of the description of commit f7b78602fd ("accel/tcg:
Add cluster number to TCG TB hash") in tcg_cpu_init_cflags(),
improving a bit CPUState::cluster_index documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230216142338.82982-2-philmd@linaro.org>
The structure is accessed read-only by qdev_get_parent_bus().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230212224730.51438-2-philmd@linaro.org>
Following the recommendation added in commit a98c370c46
("typedefs: (Re-)sort entries alphabetically"), and similarly
to commit 64baadc272 ("Sort include/qemu/typedefs.h"), sort
again the type definitions (in case-insensitive alphabetical
order, using 'sort --ignore-case').
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230217141832.24777-2-philmd@linaro.org>
The watchpoint API is specific to TCG system emulation.
Move it to a new compile unit. The inlined stubs are used
for user-mode and non-TCG accelerators.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221209141254.68662-1-philmd@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
User emulation shouldn't really include this header; if included
these declarations are guarded by CONFIG_KVM_IS_POSSIBLE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216220738.7355-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-2-philmd@linaro.org>
Both insert/remove_breakpoint() handlers are used in system and
user emulation. We can not use the 'hwaddr' type on user emulation,
we have to use 'vaddr' which is defined as "wide enough to contain
any #target_ulong virtual address".
gdbstub.c doesn't require to include "exec/hwaddr.h" anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-4-philmd@linaro.org>
OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, and QEMU style is to use Camel
Case, so rename qemu_or_irq as OrIRQState.
Mechanical change using:
$ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed during automatic conversion from commit 8063396bf3
("Use OBJECT_DECLARE_SIMPLE_TYPE when possible").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230220115114.25237-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cmsdk_apb_uart_create() is only used twice in the same
file. Open-code it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230220115114.25237-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Open-code the single use of xilinx_uartlite_create().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pl011_luminary_create() is only used for the Stellaris board,
open-code it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pl011_create() is only used in DeviceRealize handlers,
not a hot-path. Inlining is not justified.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This struct has no dependencies on TCG code and it is being used in
target/arm/ptw.c to simplify the passing around of page table walk
results. Those routines can be reached by KVM code via the gdbstub
breakpoint code, so take the structure out of CONFIG_TCG to make it
visible when building with --disable-tcg.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pci_device.h is not needed at all in allwinner-a10.h, and serial.h
is only needed by the corresponding .c file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230215152233.210024-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix memory corruption in the s390x dump code
* Various s390x TCG clean-ups
* s390x PV support for asynchronous teardown for reboot
* qemu-keymap related fixes
* Improvements for the duration of the gitlab-CI
* Deprecate the "-no-acpi" command line switch
-----BEGIN PGP SIGNATURE-----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=wDFZ
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-02-27' of https://gitlab.com/thuth/qemu into staging
* Simplify device casting in w/vfio/ccw.c
* Fix memory corruption in the s390x dump code
* Various s390x TCG clean-ups
* s390x PV support for asynchronous teardown for reboot
* qemu-keymap related fixes
* Improvements for the duration of the gitlab-CI
* Deprecate the "-no-acpi" command line switch
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmP8lVURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWYkg//RTKsG0+HGMtnKvjTA5NzLIJrWAQfSPfh
# ABkxNHoscReae8LGquFfeTy9cN/uA051e/P06WfPXAkg3Uj72JKHHs/ncm5VhApY
# 7moOCIHlvFRAsy5TKYoInM+Yo0jov7vgKqqJcS3AL3hwhmvEwPwKr0cpZLNfKV8p
# GD+XM453g0AFn2jDFoXDsnHX3zco+7sd4dQN4olSrkd/gDel2UQ5JE4gJ/o6Qgys
# GW4vb+NpxQ6W3mSlU+ClTr03ZljPkascBS7tZO8Fwn+J3Wv4UTNLlM1JFXQhC3v8
# x9HpVpk4HW6C/hiPcsMpZRlXBb/HklkAhDxZ6tjTnQLRvbJ/o2uISJt+ZgeH9zeQ
# Ae4Ap7yPxsuGbx2twzbGoyEPAJj18hW7EUd6KromFqy877svmyRYs3NXQqSJOEmh
# Pv7VriUe6esyyVSXWjA6g2imo5pIhWxxRlsNVrrp8vOJNYT+ygBIFqu28ngwk86H
# jZOLqekEkQrNkwZZLuoxm8FyCAvzfMBeHQFlDnL4a3114dlC6X3/cJqCZ5htTaO+
# t7CL6QcepRh0NQPw1jRlUCARZK+WocjwwcmzgVzSKKzGpdg/EJC8Sg54l7wdVQCp
# jY3HEUWHHHmrqe3IefrzadRQhsB9xKcNdUaZmetRUm+ohgSc9S0cfpVXNwT+G3+M
# a47dp9ueI6Q=
# =wDFZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 11:34:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-02-27' of https://gitlab.com/thuth/qemu: (33 commits)
Deprecate the "-no-acpi" command line switch
gitlab-ci.d/base: Mark jobs as interruptible by default
gitlab-ci.d: Build with --enable-fdt=system by default
gitlab-ci.d/buildtest-template: Simplify the configure step
gitlab-ci.d/buildtest: Disintegrate the build-coroutine-sigaltstack job
gitlab-ci.d/buildtest: Remove aarch64-softmmu from the build-system-ubuntu job
Updated the FSF address to <https://www.gnu.org/licenses/>
meson: fix dependency on qemu-keymap
qemu-keymap: Silence memory leak warning from Clang's sanitizer
configure: Add 'mkdir build' check
tests/tcg/s390x: Add sam.S
tests/tcg/s390x: Add bal.S
target/s390x: Use tcg_constant_* in translate_vx.c.inc
target/s390x: Use tcg_constant_i32 for fpinst_extract_m34
target/s390x: Use tcg_constant_* for DisasCompare
target/s390x: Use tcg_constant_* in local contexts
s390x/pv: Add support for asynchronous teardown for reboot
target/s390x: Hoist some computation in access_memmove
target/s390x: Inline do_access_{get,set}_byte
target/s390x: Remove TLB_NOTDIRTY workarounds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Free Software Foundation moved to a new address and some
sources in QEMU referred to their old location.
The address should be updated and replaced by a pointer to
<https://www.gnu.org/licenses/>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/379
Signed-off-by: Khadija Kamran <kkamran.bese16seecs@seecs.edu.pk>
Message-Id: <576ee9203fdac99d7251a98faa66b9ce1e7febc5.1675941486.git.kkamran.bese16seecs@seecs.edu.pk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds support for the asynchronous teardown for reboot for
protected VMs.
When attempting to tear down a protected VM, try to use the new
asynchronous interface first. If that fails, fall back to the classic
synchronous one.
The asynchronous interface involves invoking the new
KVM_PV_ASYNC_DISABLE_PREPARE command for the KVM_S390_PV_COMMAND ioctl.
This will prepare the current protected VM for asynchronous teardown.
Once the protected VM is prepared for teardown, execution can continue
immediately.
Once the protected VM has been prepared, a new thread is started to
actually perform the teardown. The new thread uses the new
KVM_PV_ASYNC_DISABLE command for the KVM_S390_PV_COMMAND ioctl. The
previously prepared protected VM is torn down in the new thread.
Once KVM_PV_ASYNC_DISABLE is invoked, it is possible to use
KVM_PV_ASYNC_DISABLE_PREPARE again. If a protected VM has already been
prepared and its cleanup has not started, it will not be possible to
prepare a new VM. In that case the classic synchronous teardown has to
be performed.
The synchronous teardown will now also clean up any prepared VMs whose
asynchronous teardown has not been initiated yet.
This considerably speeds up the reboot of a protected VM; for large VMs
especially, it could take a long time to perform a reboot with the
traditional synchronous teardown, while with this patch it is almost
immediate.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230214163035.44104-3-imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
hw.h only contains the protoype of one function nowadays, hw_error(),
so all files that do not use this function anymore also do not need
to include this header anymore.
Message-Id: <20230216142915.304481-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* A triplet of cleanups to the kernel/initrd loader that avoids
duplication between the various boards.
* Weiwei Li, Daniel Henrique Barboza, and Liu Zhiwei have been added as
reviewers. Thanks for the help!
* A fix for PMP matching to avoid incorrectly appling the default
permissions on PMP permission violations.
* A cleanup to avoid an unnecessary avoid env_archcpu() in
cpu_get_tb_cpu_state().
* Fixes for the vector slide instructions to avoid truncating 64-bit
values (such as doubles) on 32-bit targets.
-----BEGIN PGP SIGNATURE-----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=Umli
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu into staging
Fourth RISC-V PR for QEMU 8.0, Attempt 2
* A triplet of cleanups to the kernel/initrd loader that avoids
duplication between the various boards.
* Weiwei Li, Daniel Henrique Barboza, and Liu Zhiwei have been added as
reviewers. Thanks for the help!
* A fix for PMP matching to avoid incorrectly appling the default
permissions on PMP permission violations.
* A cleanup to avoid an unnecessary avoid env_archcpu() in
cpu_get_tb_cpu_state().
* Fixes for the vector slide instructions to avoid truncating 64-bit
values (such as doubles) on 32-bit targets.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmP5Br8THHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYiT4RD/9hdSlQlR1g/2h4fbCJ3U0GvyNH0T7N
# mt3AX8hFvmfR1O63qqVVebJSHM1dTm6WsA19vKE5tdtbjV5V8UZuBTSqYeRBSrLd
# LK9IHhwv3k9OQ/EG8CgRo7HEMxAurpC26zTf3chnfwa1Wyl5XxCXNx5hPbhu18G9
# oxw0sBi51T0Tb+N6lOVVSfmiEZWLXRq+lDCZdV0j864brsSjo4x8VEGrLaFTOJLf
# X4MW6vBI4Pcb7EGnHjj5WvRKsf8gdahdx8bSTjORIm8oGri9Iyw6Vrg2khuhjnuH
# 99sD1O06cvrylp+sCOVei8H3S6/xCepQXUXnCBCd1/cetgV+olo+ZR78Z8ZjXPED
# jhZ23lsDcge+4W141lsCiwLgzI0YO3Ac+84zQLIvcx16c8zow3G9FO9sTlBSsgnW
# 0XJrsUF7AZB6quUSMytG7WK+OBizzCRwj7ItC+Mty68wLrei5lDVj8b0t8hAQEdr
# dOb7jku+Dz8OspGZx1aDKKifGDO+Ppv4PjAM2G44OmkM824SvvFg8+FEr9NgbKbp
# VgTZDCeVC6IEpzthKsK8WeompLo7Sc33KITqwMbGiyGs+gsnmgKP2bcTLF8YTlFk
# dqFBWjo3tjH5oukgTLCSYY4xPaHR9q418vGAfRox15GtUVliQ9iL5oH47PVXg4U7
# YsNZ74nD1pUueg==
# =Umli
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Feb 2023 18:49:35 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu:
target/riscv: Fix vslide1up.vf and vslide1down.vf
target/riscv: avoid env_archcpu() in cpu_get_tb_cpu_state()
target/riscv: Smepmp: Skip applying default rules when address matches
MAINTAINERS: Add some RISC-V reviewers
target/riscv: Remove privileged spec version restriction for RVV
hw/riscv/boot.c: make riscv_load_initrd() static
hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()
hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When an IOThread is configured, the ctrl virtqueue is processed in the
IOThread. TMFs that reset SCSI devices are currently called directly
from the IOThread and trigger an assertion failure in blk_drain() from
the following call stack:
virtio_scsi_handle_ctrl_req -> virtio_scsi_do_tmf -> device_code_reset
-> scsi_disk_reset -> scsi_device_purge_requests -> blk_drain
../block/block-backend.c:1780: void blk_drain(BlockBackend *): Assertion `qemu_in_main_thread()' failed.
The blk_drain() function is not designed to be called from an IOThread
because it needs the Big QEMU Lock (BQL).
This patch defers TMFs that reset SCSI devices to a Bottom Half (BH)
that runs in the main loop thread under the BQL. This way it's safe to
call blk_drain() and the assertion failure is avoided.
Introduce s->tmf_bh_list for tracking TMF requests that have been
deferred to the BH. When the BH runs it will grab the entire list and
process all requests. Care must be taken to clear the list when the
virtio-scsi device is reset or unrealized. Otherwise deferred TMF
requests could execute later and lead to use-after-free or other
undefined behavior.
The s->resetting counter that's used by TMFs that reset SCSI devices is
accessed from multiple threads. This patch makes that explicit by using
atomic accessor functions. With this patch applied the counter is only
modified by the main loop thread under the BQL but can be read by any
thread.
Reported-by: Qing Wang <qinwang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_refresh_total_sectors() need to hold a reader lock for the
graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-24-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_*_dirty_bitmap() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-23-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_delete_file() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-22-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_register_buf() and bdrv_unregister_buf() need to hold a reader lock
for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-21-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_eject() and bdrv_co_lock_medium() need to hold a reader lock for
the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-20-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_is_inserted() need to hold a reader lock for the graph.
blk_is_inserted() is done as a co_wrapper_mixed_bdrv_rdlock (unlike most
other blk_* functions) because it is called a lot from other blk_co_*()
functions that already hold the lock. These calls go through
blk_is_available(), which becomes a co_wrapper_mixed_bdrv_rdlock, too,
for the same reason.
Functions that run in a coroutine and can call bdrv_co_is_available()
directly are changed to do so, which results in better TSA coverage.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-19-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_io_plug() and bdrv_co_io_unplug() need to hold a reader lock for
the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-18-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_create() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-16-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_copy_range() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_sync() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add
the annotation to public functions yet.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_zeroes() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pdiscard() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_flush() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_ioctl() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_block_status() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_truncate() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is never called outside of block.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
The stubbed out Rocker monitor commands are the last remaining users
of QERR_FEATURE_DISABLED. They fail like this:
(qemu) info rocker mumble
Error: The feature 'rocker' is not enabled
The real rocker commands fail like this when the named object doesn't
exist:
Error: rocker mumble not found
If that's good enough when Rocker is enabled, then it's good enough
when it's disabled, so replace QERR_FEATURE_DISABLED with that, and
drop the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
replay_add_blocker() takes an Error *. All callers pass one created
like this:
error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "some feature");
Folding this into replay_add_blocker() simplifies the callers, losing
a bit of generality we haven't needed in more than six years.
Since there are no other uses of macro QERR_REPLAY_NOT_SUPPORTED,
replace the remaining one by its expansion, and drop the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Windows implementation of setjmp/longjmp is done in
C:/WINDOWS/system32/ucrtbase.dll. Alas, on arm64, it seems to *always*
perform stack unwinding, which crashes from generated code.
By using alternative implementation built in mingw, we avoid doing stack
unwinding and this fixes crash when calling longjmp.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221153006.20300-3-pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently dying to one of the core_dump_signal()s deadlocks, because
dump_core_and_abort() calls start_exclusive() two times: first via
stop_all_tasks(), and then via preexit_cleanup() ->
qemu_plugin_user_exit().
There are a number of ways to solve this: resume after dumping core;
check cpu_in_exclusive_context() in qemu_plugin_user_exit(); or make
{start,end}_exclusive() recursive. Pick the last option, since it's
the most straightforward one.
Fixes: da91c19202 ("linux-user: Clean up when exiting due to a signal")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJj7xKYAAoJEO8Ells5jWIRDZQH/Rao24sq3j97qE5RzekvANzq
GnHUyLnl3yeOSNumv2BJInZTvgUpYL2etGQr3DtGRwOrr7w1vKB3zhY3V3jQefkh
f4rsEGkamL/qM2N2cGUIUSqevo7OGnP8aQojpEi4MWWZ30B3L6jqd4NqyA1gyndV
1eBkpR+BY2PjcLbgvFUZEXeAn/vapE5NKULXUGhg5mMvgwYH3CgZXpqqkxr876za
S4rZMtReXKNeid14Z35SUjJdV2WKYmo/lN9+GQxF2YNLmDC3RtuFQVm038erSqvs
uLVSg8tiIlCyOcSDpR/BARNrxVwzlJp5X6ocapHubS/i0Rp/Zo7ezSk/XWH1gfU=
=UbzF
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJj7xKYAAoJEO8Ells5jWIRDZQH/Rao24sq3j97qE5RzekvANzq
# GnHUyLnl3yeOSNumv2BJInZTvgUpYL2etGQr3DtGRwOrr7w1vKB3zhY3V3jQefkh
# f4rsEGkamL/qM2N2cGUIUSqevo7OGnP8aQojpEi4MWWZ30B3L6jqd4NqyA1gyndV
# 1eBkpR+BY2PjcLbgvFUZEXeAn/vapE5NKULXUGhg5mMvgwYH3CgZXpqqkxr876za
# S4rZMtReXKNeid14Z35SUjJdV2WKYmo/lN9+GQxF2YNLmDC3RtuFQVm038erSqvs
# uLVSg8tiIlCyOcSDpR/BARNrxVwzlJp5X6ocapHubS/i0Rp/Zo7ezSk/XWH1gfU=
# =UbzF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 05:37:28 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
vdpa: fix VHOST_BACKEND_F_IOTLB_ASID flag check
net: stream: add a new option to automatically reconnect
vmnet: stop recieving events when VM is stopped
net: Increase L2TPv3 buffer to fit jumboframes
hw/net/vmxnet3: allow VMXNET3_MAX_MTU itself as a value
hw/net/lan9118: log [read|write]b when mode_16bit is enabled rather than abort
net: Replace "Supported NIC models" with "Available NIC models"
net: Restore printing of the help text with "-nic help"
net: Move the code to collect available NIC models to a separate function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- configure: Enable -Wthread-safety if present
- no_co_wrapper to fix bdrv_open*() calls from coroutine context
- curl fixes, including enablement of newer libcurl versions
- MAINTAINERS: drop Vladimir from parallels block driver
- hbitmap: fix hbitmap_status() return value for first dirty bit case
- file-posix: Fix assertion failure in write_zeroes after moving
bdrv_getlength() to co_wrapper
-----BEGIN PGP SIGNATURE-----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=FtaA
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- configure: Enable -Wthread-safety if present
- no_co_wrapper to fix bdrv_open*() calls from coroutine context
- curl fixes, including enablement of newer libcurl versions
- MAINTAINERS: drop Vladimir from parallels block driver
- hbitmap: fix hbitmap_status() return value for first dirty bit case
- file-posix: Fix assertion failure in write_zeroes after moving
bdrv_getlength() to co_wrapper
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmPvgm0RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZxQg//ZWwwh/s/P1PnKAjInNZZNklAWKThNEbZ
# cF1S94w26IhEQqM0i6MflqcDsPU5t4xZtBUOizx++9M4G8amWnomJSdczUcKULla
# Az9yweFC1Gu6ENdw+ql5VOzCfpdH5Bn9Jkly5fxuI4vmnBz1PH1Dnd3P4wuLq2sL
# xna5dijVEhRc5mTKWjbp4nFfvQhucuEBPSNjgnZwEPbhciWxTMmB1GmyRvTxZy8v
# UY8PcoTlxdKeVQ6DTmkOirphpGj7HeNCEQnZppWs7vHys2oGi9kmR5qTKUNZxGrY
# 8yWiCiVDqbb50fhEC1srhph79bCij87QC1N33Bm+NuGjnjG4bKVx2B9DC8+6S/JS
# e3x6u+r0dd6/t0rjKnt1+inYqmM+i5lBJ7+R0yhWUQ+DYkvttNf5yiotD8qvccWJ
# Kcx14lfjPLK7siAMEY5K0bNMimhN4RR9oCLoPTOHei+vlxdfiMm2XPN61NNht5gD
# lYZ8JMBsEF/o2ebqTgsJrIHS+Q/8MqcwSunBc54fcXZoF+eiza3W2ArXLNfAEfGE
# U4JowNK2PrTIrpEjD+Vs0RsBBSmN5PcYIAz04ioODpDnYMq73/t3x9MKdVoxOT64
# AM7w58fSyWu8iwvkeA0d3XeVtSHFqZ49PqqIem4IegtnC/AXMUNrJ/VT99xHjeJY
# oLhOJz7LUg0=
# =FtaA
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 13:34:37 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (22 commits)
hbitmap: fix hbitmap_status() return value for first dirty bit case
block/file-posix: don't use functions calling AIO_WAIT_WHILE in worker threads
MAINTAINERS: drop Vladimir from parallels block driver
block: temporarily hold the new AioContext of bs_top in bdrv_append()
block: Handle curl 7.55.0, 7.85.0 version changes
block: Assert non-coroutine context for bdrv_open_inherit()
block: Fix bdrv_co_create_opts_simple() to open images with no_co_wrapper
vpc: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
vmdk: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
vhdx: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
vdi: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
qed: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
qcow2: Fix open/create to open images with no_co_wrapper
qcow: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
parallels: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
luks: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
block: Create no_co_wrappers for open functions
block-coroutine-wrapper: Introduce no_co_wrapper
curl: Fix error path in curl_open()
configure: Enable -Wthread-safety if present
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last return statement should return true, as we already evaluated that
start == next_dirty
Also, fix hbitmap_status() description in header
Cc: qemu-stable@nongnu.org
Fixes: a6426475a7 ("block/dirty-bitmap: introduce bdrv_dirty_bitmap_status()")
Signed-off-by: Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com>
Message-Id: <20230202181523.423131-1-andrey.zhadchenko@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Images can't be opened in coroutine context because opening needs to
change the block graph. Add no_co_wrappers so that coroutines have a
simple way of opening images in a BH instead.
At the same time, mark the wrapped functions as no_coroutine_fn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some functions must not be called from coroutine context. The common
pattern to use them anyway from a coroutine is running them in a BH and
letting the calling coroutine yield to be woken up when the BH is
completed.
Instead of manually writing such wrappers, add support for generating
them to block-coroutine-wrapper.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FreeBSD implements pthread headers using TSA (thread safety analysis)
annotations, therefore when an application is compiled with
-Wthread-safety there are some locking/annotation requirements that the
user of the pthread API has to follow.
This will also be the case in QEMU, since bsd-user/mmap.c uses the
pthread API. Therefore when building it with -Wthread-safety the
compiler will throw warnings because the functions are not properly
annotated. We need TSA to be enabled because it ensures that the
critical sections of an annotated variable are properly locked.
In order to make the compiler happy and avoid adding all the necessary
macros to all callers (lock functions should use TSA_ACQUIRE, while
unlock TSA_RELEASE, and this applies to all users of pthread_mutex_lock
and pthread_mutex_unlock), simply use TSA_NO_TSA to supppress such
warnings.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230117135203.3049709-3-eesposit@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FreeBSD implements pthread headers using TSA (thread safety analysis)
annotations, therefore when an application is compiled with
-Wthread-safety there are some locking/annotation requirements that the
user of the pthread API has to follow.
This will also be the case in QEMU, since util/qemu-thread-posix.c uses
the pthread API. Therefore when building it with -Wthread-safety, the
compiler will throw warnings because the functions are not properly
annotated. We need TSA to be enabled because it ensures that the
critical sections of an annotated variable are properly locked.
In order to make the compiler happy and avoid adding all the necessary
macros to all callers (lock functions should use TSA_ACQUIRE, while
unlock TSA_RELEASE, and this applies to all users of pthread_mutex_lock
and pthread_mutex_unlock), simply use TSA_NO_TSA to supppress such
warnings.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230117135203.3049709-2-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The code that collects the available NIC models is not really specific
to PCI anymore and will be required in the next patch, too, so let's
move this into a new separate function in net.c instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that v2 protocol implementation has been added, remove the
deprecated v1 implementation.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-10-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Implement the basic mandatory part of VFIO migration protocol v2.
This includes all functionality that is necessary to support
VFIO_MIGRATION_STOP_COPY part of the v2 protocol.
The two protocols, v1 and v2, will co-exist and in the following patches
v1 protocol code will be removed.
There are several main differences between v1 and v2 protocols:
- VFIO device state is now represented as a finite state machine instead
of a bitmap.
- Migration interface with kernel is now done using VFIO_DEVICE_FEATURE
ioctl and normal read() and write() instead of the migration region.
- Pre-copy is made optional in v2 protocol. Support for pre-copy will be
added later on.
Detailed information about VFIO migration protocol v2 and its difference
compared to v1 protocol can be found here [1].
[1]
https://lore.kernel.org/all/20220224142024.147653-10-yishaih@nvidia.com/
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>.
Link: https://lore.kernel.org/r/20230216143630.25610-9-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To avoid name collisions, rename functions and structs related to VFIO
migration protocol v1. This will allow the two protocols to co-exist
when v2 protocol is added, until v1 is removed. No functional changes
intended.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-8-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently VFIO migration doesn't implement some kind of intermediate
quiescent state in which P2P DMAs are quiesced before stopping or
running the device. This can cause problems in multi-device migration
where the devices are doing P2P DMAs, since the devices are not stopped
together at the same time.
Until such support is added, block migration of multiple devices.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-6-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Addresses targeting the second translation table (TTB1) in the SMMU have
all upper bits set. Ensure the IOMMU region covers all 64 bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nuvoton's PSPI is a general purpose SPI module which enables
connections to SPI-based peripheral devices.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Chris Rauer <crauer@google.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Message-id: 20230208235433.3989937-3-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GBPA register can be used to globally abort all
transactions.
It is described in the SMMU manual in "6.3.14 SMMU_GBPA".
ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to
be zero(Do not abort incoming transactions).
Other fields have default values of Use Incoming.
If UPDATE is not set, the write is ignored. This is the only permitted
behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure)
As this patch adds a new state to the SMMU (GBPA), it is added
in a new subsection for forward migration compatibility.
GBPA is only migrated if its value is different from the reset value.
It does this to be backward migration compatible if SW didn't write
the register.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230214094009.2445653-1-smostafa@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While dozens of files include "cpu.h", only 3 files require
these NVIC helper declarations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-12-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro,
similarly to automatic conversion from commit 8063396bf3
("Use OBJECT_DECLARE_SIMPLE_TYPE when possible").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only remaining caller is riscv_load_kernel_and_initrd() which
belongs to the same file.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The microchip_icicle_kit, sifive_u, spike and virt boards are now doing
the same steps when '-kernel' is used:
- execute load_kernel()
- load init_rd()
- write kernel_cmdline
Let's fold everything inside riscv_load_kernel() to avoid code
repetition. To not change the behavior of boards that aren't calling
riscv_load_init(), add an 'load_initrd' flag to riscv_load_kernel() and
allow these boards to opt out from initrd loading.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230206140022.2748401-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Next patch will move all calls to riscv_load_initrd() to
riscv_load_kernel(). Machines that want to load initrd will be able to
do via an extra flag to riscv_load_kernel().
This change will expose a sign-extend behavior that is happening in
load_elf_ram_sym() when running 32 bit guests [1]. This is currently
obscured by the fact that riscv_load_initrd() is using the return of
riscv_load_kernel(), defined as target_ulong, and this return type will
crop the higher 32 bits that would be padded with 1s by the sign
extension when running in 32 bit targets. The changes to be done will
force riscv_load_initrd() to use an uint64_t instead, exposing it to the
padding when dealing with 32 bit CPUs.
There is a discussion about whether load_elf_ram_sym() should or should
not sign extend the value returned by 'lowaddr'. What we can do is to
prevent the behavior change that the next patch will end up doing.
riscv_load_initrd() wasn't dealing with 64 bit kernel entries when
running 32 bit CPUs, and we want to keep it that way.
One way of doing it is to use target_ulong in 'kernel_entry' in
riscv_load_kernel() and rely on the fact that this var will not be sign
extended for 32 bit targets. Another way is to explictly clear the
higher 32 bits when running 32 bit CPUs for all possibilities of
kernel_entry.
We opted for the later. This will allow us to be clear about the design
choices made in the function, while also allowing us to add a small
comment about what load_elf_ram_sym() is doing. With this change, the
consolation patch can do its job without worrying about unintended
behavioral changes.
[1] https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg02281.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
=G3PN
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* block/iscsi: fix double-free on BUSY or similar statuses
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
# xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
# vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
# HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
# OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
# BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
# =G3PN
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 12 Feb 2023 16:00:55 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
libqtest: ensure waitpid() is only called once
libqtest: split qtest_spawn_qemu function
target/i386: fix ADOX followed by ADCX
target/i386: Fix C flag for BLSI, BLSMSK, BLSR
target/i386: Fix BEXTR instruction
tests/tcg/i386: Introduce and use reg_t consistently
vl: catch [accel] entry without accelerator
block/iscsi: fix double-free on BUSY or similar statuses
remove unnecessary extern "C" blocks
build: make meson-buildoptions.sh stable
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Once that res_compatible is removed, they don't make sense anymore.
We remove the _only preffix. And to make things clearer we rename
them to must_precopy and can_postcopy.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Nothing assigns to it after previous commit.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The new `qcrypto_tls_session_check_pending` function allows the caller
to know if data have already been consumed from the backend and is
already available.
Signed-off-by: Antoine Damhet <antoine.damhet@shadow.tech>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Include it in the .c files instead that use the error reporting
functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include "hw/registerfields.h" in the .c files instead (if needed).
Message-Id: <20230210112315.1116966-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A handful of header files in QEMU are wrapped with extern "C" blocks.
These are not necessary: there are C++ source files anymore in QEMU,
and even where there were some, they did not include most of these
files anyway.
Remove them for consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-17-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230202133830.2152150-16-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-12-armbru@redhat.com>
[Straightforward conflict with commit d5890ea072 resolved]
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-10-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-9-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-8-armbru@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* various small cleanups and fixes
* new variant of the supermicrox11-bmc machine using an ast2500-a1 SoC
* at24c_eeprom extension to define eeprom contents with static arrays
* ast10x0 model and test improvements
* avocado update of images to use the latest
-----BEGIN PGP SIGNATURE-----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=IY/i
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230207' of https://github.com/legoater/qemu into staging
aspeed queue:
* various small cleanups and fixes
* new variant of the supermicrox11-bmc machine using an ast2500-a1 SoC
* at24c_eeprom extension to define eeprom contents with static arrays
* ast10x0 model and test improvements
* avocado update of images to use the latest
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmPiByEACgkQUaNDx8/7
# 7KF1nw/7BxVb8bxO5T00AnGDFNahDq3ItyisrbOkElDw18oN1eULrtZFH1UopjDE
# 3HKwR2nb4X7MfcLirVXXxwO1GgIxUkeCsVEY6hpg3TxDPRhPW2toNpNt/WCfFKgq
# ZdYdaKgkON/xHQPv6kgQzU2n9Zpuznj0CE9A3k1mAyBcCSitsvu4TW6AQBKmLgUR
# 9lu61onfX9XoPxZv3abuY3c3UyzevOc6BUT67dmr8naAhHLyBU+DWAW6Kg0Dtc9j
# p+bwxIDRimK50DJt9l13OLSAJyhrW1gMsPPGb+48OClpEOhHwq8oqRuMFpbHaQ0/
# 2MMtMbavXtzBScfmLzR3yw2IwohxSXKMe+7irkJiG/hc8/gtpRATaaS+zfvS0rla
# QybWYtJyjmW+QUOnmBsKGwT0PWJcOd3bKtVPgPd7WGeHGVtTBOqU/svExaO+gIv8
# uX1gOelEgLmLenUjc/Wp4cHgnePTBK8vG1g3IrEtcCblhwpr0e3/aJgHGgO3cQzH
# X9P2buwHyLzjsie9S1ebG9Ceg/VsGQpxNGISZdG+Z4c3+GYu5gcGQcqIAuFmwBnE
# QHSNHJXITyWjo7UuqL7e1J7vROUKn0S15V9MO/yOmZgkqubu4Gt3jGcJtIGqIBlu
# MFra7SiVjKBnt6PD3aKEdD9uahbqFUfmX9411ZmYUUzpfflKnCQ=
# =IY/i
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Feb 2023 08:09:05 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230207' of https://github.com/legoater/qemu: (25 commits)
aspeed/sdmc: Drop unnecessary scu include
tests/avocado: Test Aspeed Zephyr SDK v00.01.08 on AST1030 board
hw/arm/aspeed_ast10x0: Add TODO comment to use Cortex-M4F
hw/arm/aspeed_ast10x0: Map HACE peripheral
hw/arm/aspeed_ast10x0: Map the secure SRAM
hw/arm/aspeed_ast10x0: Map I3C peripheral
hw/arm/aspeed_ast10x0: Add various unimplemented peripherals
hw/misc/aspeed_hace: Do not crash if address_space_map() failed
hw/watchdog/wdt_aspeed: Log unimplemented registers as UNIMP level
hw/watchdog/wdt_aspeed: Extend MMIO range to cover more registers
hw/watchdog/wdt_aspeed: Rename MMIO region size as 'iosize'
hw/nvram/eeprom_at24c: Make reset behavior more like hardware
hw/arm/aspeed: Add aspeed_eeprom.c
hw/nvram/eeprom_at24c: Add init_rom field and at24c_eeprom_init_rom helper
hw/arm/aspeed: Replace aspeed_eeprom_init with at24c_eeprom_init
hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boards
hw/core/loader: Remove declarations of option_rom_has_mr/rom_file_has_mr
tests/avocado/machine_aspeed.py: Mask systemd services to speed up SDK boot
tests/avocado/machine_aspeed.py: update buildroot tests
m25p80: Add the is25wp256 SFPD table
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In this try
- rebase to latest upstream
- same than previous patch
- fix compilation on non linux (userfaultfd.h) (me)
- query-migrationthreads (jiang)
- fix race on reading MultiFDPages_t.block (zhenzhong)
- fix flush of zero copy page send reuest (zhenzhong)
Please apply.
Previous try:
It includes:
- David Hildenbrand fixes for virtio-men
- David Gilbert canary to detect problems
- Fix for rdma return values (Fiona)
- Peter Xu uffd_open fixes
- Peter Xu show right downtime for postcopy
- manish.mishra msg fix fixes
- my vfio changes.
Please apply.
-----BEGIN PGP SIGNATURE-----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=ZQbR
-----END PGP SIGNATURE-----
Merge tag 'migration-20230206-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
In this try
- rebase to latest upstream
- same than previous patch
- fix compilation on non linux (userfaultfd.h) (me)
- query-migrationthreads (jiang)
- fix race on reading MultiFDPages_t.block (zhenzhong)
- fix flush of zero copy page send reuest (zhenzhong)
Please apply.
Previous try:
It includes:
- David Hildenbrand fixes for virtio-men
- David Gilbert canary to detect problems
- Fix for rdma return values (Fiona)
- Peter Xu uffd_open fixes
- Peter Xu show right downtime for postcopy
- manish.mishra msg fix fixes
- my vfio changes.
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmPhobYACgkQ9IfvGFhy
# 1yMNaA/9EHDPqrI1HL/VkJG4nNOOsQR7RbburXEberZOzvLjnqpjUD3Ls9qV6rx+
# ieHa5T4imYJFk72Wa5vx4r1/dCjtJD2W6jg5+/0nTvYAHrs1U1VRqpuTr0HiXdbJ
# ZLLCnW5eDyO3eMaOX0MUkgHgL0FNkc/Lq5ViCTFsMu9O9xMuDLLdAC3cdvslKuOu
# X1gKByr9jT817Y9e36amYmRaJKC6Cr/PIekNVFu12HBW79pPusLX8KWEf4RBw4HR
# sPwTvMCR/BwZ0+2Lppan60G5rt/ZxDu40oU7y+RHlfWqevl4hDM84/nhjMvEgzc5
# a4Ahe2ERGLwwnC8z3l7v9+pEzSGzDoPcnRGvZcpUpk68wTDtxd5Bdq8CwmNUfL07
# VzWcYpH0yvmwjBba9jfn9fAVgnG5rVp558XcYLIII3wEToty3UDtm43wSdj2CGr6
# cu+IPAp+n/I5G9SRYBTU9ozJz45ttnEe0hxUtZ4I3MuhzHi1VEDAqTWM/X0LyS41
# TB3Y5B2KKpJYbPyZEH4nyTeetR2k7alTFzahCgKqVfOgL0nJx54petjS1K+B1P72
# g6lhP9WnQ33W+M8S7J/aGEaDJd1lFyFB2Rdjn2ZZnASH/fR9j0mFmXWvulXtjFNp
# Sfim3887+Iv4Uzw4VWEe3mM5Ypi/Ba2CmuTjy/pM08Ey8X1Qs5o=
# =ZQbR
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Feb 2023 00:56:22 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230206-pull-request' of https://gitlab.com/juan.quintela/qemu: (30 commits)
migration: save/delete migration thread info
migration: Introduce interface query-migrationthreads
multifd: Fix flush of zero copy page send request
multifd: Fix a race on reading MultiFDPages_t.block
migration: check magic value for deciding the mapping of channels
io: Add support for MSG_PEEK for socket channel
migration/dirtyrate: Show sample pages only in page-sampling mode
migration: Perform vmsd structure check during tests
migration: Add canary to VMSTATE_END_OF_LIST
migration/rdma: fix return value for qio_channel_rdma_{readv,writev}
migration: Show downtime during postcopy phase
virtio-mem: Proper support for preallocation with migration
virtio-mem: Migrate immutable properties early
virtio-mem: Fail if a memory backend with "prealloc=on" is specified
migration/ram: Factor out check for advised postcopy
migration/vmstate: Introduce VMSTATE_WITH_TMP_TEST() and VMSTATE_BITMAP_TEST()
migration/savevm: Allow immutable device state to be migrated early (i.e., before RAM)
migration/savevm: Prepare vmdesc json writer in qemu_savevm_state_setup()
migration/savevm: Move more savevm handling into vmstate_save()
migration/ram: Optimize ram_write_tracking_start() for RamDiscardManager
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some SRAM appears to be used by the Secure Boot unit and
crypto accelerators. Name it 'secure sram'.
Note, the SRAM base address was already present but unused
(the 'SBC' index is used for the MMIO peripheral).
Interestingly using CFLAGS=-Winitializer-overrides reports:
../hw/arm/aspeed_ast10x0.c:32:30: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
[ASPEED_DEV_SBC] = 0x7E6F2000,
^~~~~~~~~~
../hw/arm/aspeed_ast10x0.c:24:30: note: previous initialization is here
[ASPEED_DEV_SBC] = 0x79000000,
^~~~~~~~~~
This fixes with Zephyr:
uart:~$ rsa test
rsa test vector[0]:
[00:00:26.156,000] <err> os: ***** BUS FAULT *****
[00:00:26.157,000] <err> os: Precise data bus error
[00:00:26.157,000] <err> os: BFAR Address: 0x79000000
[00:00:26.158,000] <err> os: r0/a1: 0x79000000 r1/a2: 0x00000000 r2/a3: 0x00001800
[00:00:26.158,000] <err> os: r3/a4: 0x79001800 r12/ip: 0x00000800 r14/lr: 0x0001098d
[00:00:26.158,000] <err> os: xpsr: 0x81000000
[00:00:26.158,000] <err> os: Faulting instruction address (r15/pc): 0x0001e1bc
[00:00:26.158,000] <err> os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0
[00:00:26.158,000] <err> os: Current thread: 0x38248 (shell_uart)
[00:00:26.165,000] <err> os: Halting system
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
[ clg: Fixed size of Secure Boot Controller Memory ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
