Add ADC model for AST2700 ADC support.
The ADC controller registers base address is start at
0x14C0_0000 and its address space is 0x1000.
The ADC controller interrupt is connected to
GICINT130_INTC group at bit 16. The GIC IRQ is 130.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The default behavior of some Aspeed machines is to boot from the eMMC
device, like the rainier-bmc. Others like ast2600-evb could also boot
from eMMC if the HW strapping boot-from-eMMC bit was set. Add a
property to set or unset this bit. This is useful to test boot images.
For now, only activate this property on the ast2600-evb and rainier-bmc
machines for which eMMC images are available or can be built.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To change default behavior of a machine and boot from eMMC, future
changes will add a machine option to let the user configure the
boot-from-eMMC HW strapping bit. Add a new machine attribute first.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This value is taken from a running Rainier machine.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config'
property to set the boot config register to boot from the first boot
area partition of the eMMC device. Also set the boot partition size
of the device.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping
bit is set at the board level. AST2700 also has support but it is not
yet ready in QEMU and others SoCs do not have support, so return false
always for these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The first boot area partition (64K) of the eMMC device should contain
an initial boot loader (u-boot SPL). Load it as a ROM only if an eMMC
device is available to boot from but no flash device is.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The QEMU device model representing the eMMC device of the machine is
currently created with type SD_CARD. Change the type to EMMC now that
it is available.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
SMMUv3 OAS is currently hardcoded in the code to 44 bits, for nested
configurations that can be a problem, as stage-2 might be shared with
the CPU which might have different PARANGE, and according to SMMU manual
ARM IHI 0070F.b:
6.3.6 SMMU_IDR5, OAS must match the system physical address size.
This patch doesn't change the SMMU OAS, but refactors the code to
make it easier to do that:
- Rely everywhere on IDR5 for reading OAS instead of using the
SMMU_IDR5_OAS macro, so, it is easier just to change IDR5 and
it propagages correctly.
- Add additional checks when OAS is greater than 48bits.
- Remove unused functions/macros: pa_range/MAX_PA.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-19-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything is in place, consolidate parsing of STE cfg and setting
translation stage.
Advertise nesting if stage requested is "nested".
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-18-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously, to check if faults are enabled, it was sufficient to check
the current stage of translation and check the corresponding
record_faults flag.
However, with nesting, it is possible for stage-1 (nested) translation
to trigger a stage-2 fault, so we check SMMUPTWEventInfo as it would
have the correct stage set from the page table walk.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-17-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IOMMUTLBEvent only understands IOVA, for stage-1 or stage-2
SMMU instances we consider the input address as the IOVA, but when
nesting is used, we can't mix stage-1 and stage-2 addresses, so for
nesting only stage-1 is considered the IOVA and would be notified.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-16-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some commands need rework for nesting, as they used to assume S1
and S2 are mutually exclusive:
- CMD_TLBI_NH_ASID: Consider VMID if stage-2 is supported
- CMD_TLBI_NH_ALL: Consider VMID if stage-2 is supported, otherwise
invalidate everything, this required a new vmid invalidation
function for stage-1 only (ASID >= 0)
Also, rework trace events to reflect the new implementation.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-15-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, Instead of doing TLB invalidation by ASID only, VMID will be
also required.
Add smmu_iotlb_inv_asid_vmid() which invalidates by both ASID and VMID.
However, at the moment this function is only used in SMMU_CMD_TLBI_NH_ASID
which is a stage-1 command, so passing VMID = -1 keeps the original
behaviour.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-14-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With nesting, we would need to invalidate IPAs without
over-invalidating stage-1 IOVAs. This can be done by
distinguishing IPAs in the TLBs by having ASID=-1.
To achieve that, rework the invalidation for IPAs to have a
separate function, while for IOVA invalidation ASID=-1 means
invalidate for all ASIDs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-13-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When nested translation is requested, do the following:
- Translate stage-1 table address IPA into PA through stage-2.
- Translate stage-1 table walk output (IPA) through stage-2.
- Create a single TLB entry from stage-1 and stage-2 translations
using logic introduced before.
smmu_ptw() has a new argument SMMUState which include the TLB as
stage-1 table address can be cached in there.
Also in smmu_ptw(), a separate path used for nesting to simplify the
code, although some logic can be combined.
With nested translation class of translation fault can be different,
from the class of the translation, as faults from translating stage-1
tables are considered as CLASS_TT and not CLASS_IN, a new member
"is_ipa_descriptor" added to "SMMUPTWEventInfo" to differ faults
from walking stage 1 translation table and faults from translating
an IPA for a transaction.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-12-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for nested (combined) TLB entries.
The main function combine_tlb() is not used here but in the next
patches, but to simplify the patches it is introduced first.
Main changes:
1) New field added in the SMMUTLBEntry struct: parent_perm, for
nested TLB, holds the stage-2 permission, this can be used to know
the origin of a permission fault from a cached entry as caching
the “and” of the permissions loses this information.
SMMUPTWEventInfo is used to hold information about PTW faults so
the event can be populated, the value of stage used to be set
based on the current stage for TLB permission faults, however
with the parent_perm, it is now set based on which perm has
the missing permission
When nesting is not enabled it has the same value as perm which
doesn't change the logic.
2) As combined TLB implementation is used, the combination logic
chooses:
- tg and level from the entry which has the smallest addr_mask.
- Based on that the iova that would be cached is recalculated.
- Translated_addr is chosen from stage-2.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-11-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next patch, combine_tlb() will be added which combines 2 TLB
entries into one for nested translations, which chooses the granule
and level from the smallest entry.
This means that with nested translation, an entry can be cached with
the granule of stage-2 and not stage-1.
However, currently, the lookup for an IOVA is done with input stage
granule, which is stage-1 for nested configuration, which will not
work with the above logic.
This patch reworks lookup in that case, so it falls back to stage-2
granule if no entry is found using stage-1 granule.
Also, drop aligning the iova to avoid over-aligning in case the iova
is cached with a smaller granule, the TLB lookup will align the iova
anyway for each granule and level, and the page table walker doesn't
consider the page offset bits.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-10-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ARM SMMU architecture specification (ARM IHI 0070 F.b),
In "5.2 Stream Table Entry":
[51:6] S1ContextPtr
If Config[1] == 1 (stage 2 enabled), this pointer is an IPA translated by
stage 2 and the programmed value must be within the range of the IAS.
In "5.4.1 CD notes":
The translation table walks performed from TTB0 or TTB1 are always performed
in IPA space if stage 2 translations are enabled.
This patch implements translation of the S1 context descriptor pointer and
TTBx base addresses through the S2 stage (IPA -> PA)
smmuv3_do_translate() is updated to have one arg which is translation
class, this is useful to:
- Decide wether a translation is stage-2 only or use the STE config.
- Populate the class in case of faults, WALK_EABT is left unchanged
for stage-1 as it is always IN, while stage-2 would match the
used class (TT, IN, CD), this will change slightly when the ptw
supports nested translation as it can also issue TT event with
class IN.
In case for stage-2 only translation, used in the context of nested
translation, the stage and asid are saved and restored before and
after calling smmu_translate().
Translating CD or TTBx can fail for the following reasons:
1) Large address size: This is described in
(3.4.3 Address sizes of SMMU-originated accesses)
- For CD ptr larger than IAS, for SMMUv3.1, it can trigger either
C_BAD_STE or Translation fault, we implement the latter as it
requires no extra code.
- For TTBx, if larger than the effective stage 1 output address size, it
triggers C_BAD_CD.
2) Faults from PTWs (7.3 Event records)
- F_ADDR_SIZE: large address size after first level causes stage 2 Address
Size fault (Also in 3.4.3 Address sizes of SMMU-originated accesses)
- F_PERMISSION: Same as an address translation. However, when
CLASS == CD, the access is implicitly Data and a read.
- F_ACCESS: Same as an address translation.
- F_TRANSLATION: Same as an address translation.
- F_WALK_EABT: Same as an address translation.
These are already implemented in the PTW logic, so no extra handling
required.
As in CD and TTBx translation context, the iova is not known, setting
the InputAddr was removed from "smmuv3_do_translate" and set after
from "smmuv3_translate" with the new function "smmuv3_fixup_event"
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-9-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, smmuv3_do_translate() will be used to translate the CD and the
TTBx, instead of re-writting the same logic to convert the returned
cached entry to an address, add a new macro CACHED_ENTRY_TO_ADDR.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-8-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASID and VMID used to be uint16_t in the translation config, however,
in other contexts they can be int as -1 in case of TLB invalidation,
to represent all (don’t care).
When stage-2 was added asid was set to -1 in stage-2 and vmid to -1
in stage-1 configs. However, that meant they were set as (65536),
this was not an issue as nesting was not supported and no
commands/lookup uses both.
With nesting, it’s critical to get this right as translation must be
tagged correctly with ASID/VMID, and with ASID=-1 meaning stage-2.
Represent ASID/VMID everywhere as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-7-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
smmuv3_translate() does everything from STE/CD parsing to TLB lookup
and PTW.
Soon, when nesting is supported, stage-1 data (tt, CD) needs to be
translated using stage-2.
Split smmuv3_translate() to 3 functions:
- smmu_translate(): in smmu-common.c, which does the TLB lookup, PTW,
TLB insertion, all the functions are already there, this just puts
them together.
This also simplifies the code as it consolidates event generation
in case of TLB lookup permission failure or in TT selection.
- smmuv3_do_translate(): in smmuv3.c, Calls smmu_translate() and does
the event population in case of errors.
- smmuv3_translate(), now calls smmuv3_do_translate() for
translation while the rest is the same.
Also, add stage in trace_smmuv3_translate_success()
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-6-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, translation stage is represented as an int, where 1 is stage-1 and
2 is stage-2, when nested is added, 3 would be confusing to represent nesting,
so we use an enum instead.
While keeping the same values, this is useful for:
- Doing tricks with bit masks, where BIT(0) is stage-1 and BIT(1) is
stage-2 and both is nested.
- Tracing, as stage is printed as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20240715084519.1189624-5-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMMUv3 spec (ARM IHI 0070 F.b - 7.3 Event records) defines the
class of events faults as:
CLASS: The class of the operation that caused the fault:
- 0b00: CD, CD fetch.
- 0b01: TTD, Stage 1 translation table fetch.
- 0b10: IN, Input address
However, this value was not set and left as 0 which means CD and not
IN (0b10).
Another problem was that stage-2 class is considered IN not TT for
EABT, according to the spec:
Translation of an IPA after successful stage 1 translation (or,
in stage 2-only configuration, an input IPA)
- S2 == 1 (stage 2), CLASS == IN (Input to stage)
This would change soon when nested translations are supported.
While at it, add an enum for class as it would be used for nesting.
However, at the moment stage-1 and stage-2 use the same class values,
except for EABT.
Fixes: 9bde7f0674 “hw/arm/smmuv3: Implement translate callback”
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20240715084519.1189624-4-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the following events (ARM IHI 0070 F.b - 7.3 Event records):
- F_TRANSLATION
- F_ACCESS
- F_PERMISSION
- F_ADDR_SIZE
If fault occurs at stage 2, S2 == 1 and:
- If translating an IPA for a transaction (whether by input to
stage 2-only configuration, or after successful stage 1 translation),
CLASS == IN, and IPA is provided.
At the moment only CLASS == IN is used which indicates input
translation.
However, this was not implemented correctly, as for stage 2, the code
only sets the S2 bit but not the IPA.
This field has the same bits as FetchAddr in F_WALK_EABT which is
populated correctly, so we don’t change that.
The setting of this field should be done from the walker as the IPA address
wouldn't be known in case of nesting.
For stage 1, the spec says:
If fault occurs at stage 1, S2 == 0 and:
CLASS == IN, IPA is UNKNOWN.
So, no need to set it to for stage 1, as ptw_info is initialised by zero in
smmuv3_translate().
Fixes: e703f7076a “hw/arm/smmuv3: Add page table walk for stage-2”
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240715084519.1189624-3-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the SMMU architecture specification (ARM IHI 0070 F.b),
in “3.4 Address sizes”
The address output from the translation causes a stage 1 Address Size
fault if it exceeds the range of the effective IPA size for the given CD.
However, this check was missing.
There is already a similar check for stage-2 against effective PA.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240715084519.1189624-2-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The USART devices were previously connecting their outbound IRQs
directly to the CPU because the EXTI wasn't handling direct lines
interrupts.
Now the USART connects to the EXTI inbound GPIOs, and the EXTI connects
its IRQs to the CPU.
The existing QTest for the USART (tests/qtest/stm32l4x5_usart-test.c)
checks that USART1_IRQ in the CPU is pending when expected so it
confirms that the connection through the EXTI still works.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set dma64 property for ftgmac100 model to support
64bits dram address DMA.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's observed that Linux kernel booting with the VM reports a "conflicting
mapping for input ID" FW_BUG.
The IORT doc defines "Number of IDs" to be "the number of IDs in the range
minus one", while virt-acpi-build.c simply stores the number of IDs in the
id_count without the "minus one". Meanwhile, some of the callers pass in a
0xFFFF following the spec. So, this is a mismatch between the function and
its callers.
Fix build_iort_id_mapping() by internally subtracting one from the pass-in
@id_count. Accordingly make sure that all existing callers pass in a value
without the "minus one", i.e. change all 0xFFFFs to 0x10000s.
Also, add a few lines of comments to highlight this change along with the
referencing document for this build_iort_id_mapping().
Fixes: 42e0f050e3 ("hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-Id: <20240619201243.936819-1-nicolinc@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both the other two callers of build_iort_id_mapping() just directly pass
in the IORT_NODE_OFFSET macro. Keeping a "const uint32_t" local variable
storing the same value doesn't have any gain.
Simplify this by replacing the only place using this local variable with
the macro directly.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-Id: <20240619001708.926511-1-nicolinc@nvidia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
-----BEGIN PGP SIGNATURE-----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=LxwO
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu into staging
aspeed queue:
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaDs3QACgkQUaNDx8/7
# 7KEc/BAAj5AS3rLm3NPpU13y1P1hcjuSm1/PVGTJQH+m4K9UaAkJ8VhRB0Y/rdU6
# ygGhKaCHyk96+I49Csz886YU9Wg9qnxaYJAbornHZJVGNy5tuVpQKM20kfgN3XFN
# ENJR3e+J6Ye7kCtR1ujcf0mydWDaDyq0i82ykURsudcQLMnGq1gBQGadYjt1hJoN
# F9HDPgUJ8/wjQnG8BomsrnuvUSpRTbGNV66FNxXdQ6C6d6OTKQfNnXXqrKO+8QPK
# B5XB9FjTk017DUog1jdE1SaEMowml8CmUhjMwLHOcyWhcZpEk90aMX8cQhefUs9y
# O6kNin2UYEjcTHA/lyfMQJQMNDDZTE32MyP1LwRE/5ZiHqrT7ViqNvZSPBGBueUz
# 9B0xiQTuYqcRqlwgyU73DvnTgrsKFdKQSldj5dXYVnWCKeKY/sCWApHMJxN9xMCA
# Uw1E4QfCLkd+TM6DoJAkBHWFsgi44Aym11VU4VviGNRNTgmTptgQzmHiYGNFiGZG
# OypVPM8Ti6UeVnW65l9J9f7xA0jDB+XQjhCCaoax9GlUMA4C4/Aln5OXXxIWRWFd
# XA3Gn3c/S2j7rMqdfAk68xDHuAJ3wShHlw6HLRd1Xki05WFTeLj1lejLHMdfpNmr
# DkQimzHShBqZzZGxc7FsO0keGY8kyIJkZhbCCbZrFXJXQGRdBao=
# =LxwO
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 12:59:48 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu:
hw/net:ftgmac100: fix coding style
aspeed/sdmc: Remove extra R_MAIN_STATUS case
aspeed/soc: Fix possible divide by zero
aspeed/sdmc: Check RAM size value at realize time
aspeed: Deprecate the tacoma-bmc machine
hw/gpio/aspeed: Add reg_table_count to AspeedGPIOClass
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
-----BEGIN PGP SIGNATURE-----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=fLCx
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240702' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
# wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
# z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
# IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
# nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
# yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
# tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
# TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
# TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
# nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
# EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
# 19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
# =fLCx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:59:16 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240702' of https://github.com/philmd/qemu: (22 commits)
Remove inclusion of hw/hw.h from files that don't need it
net/vmnet: Drop ifdef for macOS versions older than 12.0
block/file-posix: Drop ifdef for macOS versions older than 12.0
audio: Drop ifdef for macOS versions older than 12.0
hvf: Drop ifdef for macOS versions older than 12.0
hw/ide/macio: switch from using qemu_allocate_irq() to qdev input GPIOs
system/physmem: Fix reference to dump-guest-core
docs: document special exception for machine type deprecation & removal
hw/i386: remove obsolete manual deprecation reason string of i440fx machines
hw/ppc: remove obsolete manual deprecation reason string of spapr machines
hw: skip registration of outdated versioned machine types
hw: set deprecation info for all versioned machine types
include/hw: temporarily disable deletion of versioned machine types
include/hw: add macros for deprecation & removal of versioned machines
hw/i386: convert 'q35' machine definitions to use new macros
hw/i386: convert 'i440fx' machine definitions to use new macros
hw/m68k: convert 'virt' machine definitions to use new macros
hw/ppc: convert 'spapr' machine definitions to use new macros
hw/s390x: convert 'ccw' machine definitions to use new macros
hw/arm: convert 'virt' machine definitions to use new macros
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverity reports a possible DIVIDE_BY_ZERO issue regarding the
"ram_size" object property. This can not happen because RAM has
predefined valid sizes per SoC. Nevertheless, add a test to
close the issue.
Fixes: Coverity CID 1547113
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: Rewrote commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The tacoma-bmc machine was a board including an AST2600 SoC based BMC
and a witherspoon like OpenPOWER system. It was used for bring up of
the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc
machine which is part of a real product offering.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This calls the MACHINE_VER_DELETION() macro in the machine type
registration method, so that when a versioned machine type reaches
the end of its life, it is no longer registered with QOM and thus
cannot be used.
The actual definition of the machine type should be deleted at
this point, but experience shows that can easily be forgotten.
By skipping registration the manual code deletion task can be
done at any later date.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-12-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This calls the MACHINE_VER_DEPRECATION() macro in the definition of
all machine type classes which support versioning. This ensures
that they will automatically get deprecation info set when they
reach the appropriate point in their lifecycle.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-11-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_VIRT_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-3-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Read boot-mode value as machine property and propagate that to
SLCR.BOOT_MODE register.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-3-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config().
Do it directly instead of bridging with an iommu mr pointer.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-id: 20240619002218.926674-1-nicolinc@nvidia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace stubbed OTP memory region with the new OTP device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This struct has been unused since
Commit f932093ae1 ("hw/arm/bcm2836: Split out common part of BCM283X
classes")
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Enable CPU cluster support on SbsaQemu platform, so that users can
specify a 4-level CPU hierarchy sockets/clusters/cores/threads. And
this topology can be passed to the firmware through /cpus/topology
Device Tree.
Signed-off-by: Xiong Yining <xiongyining1480@phytium.com.cn>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240607103825.1295328-2-xiongyining1480@phytium.com.cn
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Multiple warning messages and corresponding backtraces are observed when Linux
guest is booted on the host with Fujitsu CPUs. One of them is shown as below.
[ 0.032443] ------------[ cut here ]------------
[ 0.032446] uart-pl011 9000000.pl011: ARCH_DMA_MINALIGN smaller than
CTR_EL0.CWG (128 < 256)
[ 0.032454] WARNING: CPU: 0 PID: 1 at arch/arm64/mm/dma-mapping.c:54
arch_setup_dma_ops+0xbc/0xcc
[ 0.032470] Modules linked in:
[ 0.032475] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-452.el9.aarch64
[ 0.032481] Hardware name: linux,dummy-virt (DT)
[ 0.032484] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.032490] pc : arch_setup_dma_ops+0xbc/0xcc
[ 0.032496] lr : arch_setup_dma_ops+0xbc/0xcc
[ 0.032501] sp : ffff80008003b860
[ 0.032503] x29: ffff80008003b860 x28: 0000000000000000 x27: ffffaae4b949049c
[ 0.032510] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 0.032517] x23: 0000000000000100 x22: 0000000000000000 x21: 0000000000000000
[ 0.032523] x20: 0000000100000000 x19: ffff2f06c02ea400 x18: ffffffffffffffff
[ 0.032529] x17: 00000000208a5f76 x16: 000000006589dbcb x15: ffffaae4ba071c89
[ 0.032535] x14: 0000000000000000 x13: ffffaae4ba071c84 x12: 455f525443206e61
[ 0.032541] x11: 68742072656c6c61 x10: 0000000000000029 x9 : ffffaae4b7d21da4
[ 0.032547] x8 : 0000000000000029 x7 : 4c414e494d5f414d x6 : 0000000000000029
[ 0.032553] x5 : 000000000000000f x4 : ffffaae4b9617a00 x3 : 0000000000000001
[ 0.032558] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff2f06c029be40
[ 0.032564] Call trace:
[ 0.032566] arch_setup_dma_ops+0xbc/0xcc
[ 0.032572] of_dma_configure_id+0x138/0x300
[ 0.032591] amba_dma_configure+0x34/0xc0
[ 0.032600] really_probe+0x78/0x3dc
[ 0.032614] __driver_probe_device+0x108/0x160
[ 0.032619] driver_probe_device+0x44/0x114
[ 0.032624] __device_attach_driver+0xb8/0x14c
[ 0.032629] bus_for_each_drv+0x88/0xe4
[ 0.032634] __device_attach+0xb0/0x1e0
[ 0.032638] device_initial_probe+0x18/0x20
[ 0.032643] bus_probe_device+0xa8/0xb0
[ 0.032648] device_add+0x4b4/0x6c0
[ 0.032652] amba_device_try_add.part.0+0x48/0x360
[ 0.032657] amba_device_add+0x104/0x144
[ 0.032662] of_amba_device_create.isra.0+0x100/0x1c4
[ 0.032666] of_platform_bus_create+0x294/0x35c
[ 0.032669] of_platform_populate+0x5c/0x150
[ 0.032672] of_platform_default_populate_init+0xd0/0xec
[ 0.032697] do_one_initcall+0x4c/0x2e0
[ 0.032701] do_initcalls+0x100/0x13c
[ 0.032707] kernel_init_freeable+0x1c8/0x21c
[ 0.032712] kernel_init+0x28/0x140
[ 0.032731] ret_from_fork+0x10/0x20
[ 0.032735] ---[ end trace 0000000000000000 ]---
In Linux, a check is applied to every device which is exposed through
device-tree node. The warning message is raised when the device isn't
DMA coherent and the cache line size is larger than ARCH_DMA_MINALIGN
(128 bytes). The cache line is sorted from CTR_EL0[CWG], which corresponds
to 256 bytes on the guest CPUs. The DMA coherent capability is claimed
through 'dma-coherent' in their device-tree nodes or parent nodes.
This happens even when the device doesn't implement or use DMA at all,
for legacy reasons.
Fix the issue by adding 'dma-coherent' property to the device-tree root
node, meaning all devices are capable of DMA coherent by default.
This both suppresses the spurious kernel warnings and also guards
against possible future QEMU bugs where we add a DMA-capable device
and forget to mark it as dma-coherent.
Signed-off-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-id: 20240612020506.307793-1-zhenyzha@redhat.com
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For some use-cases, it is helpful to have more than one UART
available to the guest. If the second UART slot is not already used
for a TrustZone Secure-World-only UART, create it as a NonSecure UART
only when the user provides a serial backend (e.g. via a second
-serial command line option).
This avoids problems where existing guest software only expects a
single UART, and gets confused by the second UART in the DTB. The
major example of this is older EDK2 firmware, which will send the
GRUB bootloader output to UART1 and the guest serial output to UART0.
Users who want to use both UARTs with a guest setup including EDK2
are advised to update to EDK2 release edk2-stable202311 or newer.
(The prebuilt EDK2 blobs QEMU upstream provides are new enough.)
The relevant EDK2 changes are the ones described here:
https://bugzilla.tianocore.org/show_bug.cgi?id=4577
Inspired-by: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-4-peter.maydell@linaro.org
We're going to make the second UART not always a secure-only device.
Rename the constants VIRT_UART and VIRT_SECURE_UART to VIRT_UART0
and VIRT_UART1 accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-3-peter.maydell@linaro.org
If there is more than one UART in the DTB, then there is no guarantee
on which order a guest is supposed to initialise them. The standard
solution to this is "serialN" entries in the "/aliases" node of the
dtb which give the nodename of the UARTs.
At the moment we only have two UARTs in the DTB when one is for
the Secure world and one for the Non-Secure world, so this isn't
really a problem. However if we want to add a second NS UART we'll
need the aliases to ensure guests pick the right one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-2-peter.maydell@linaro.org
Fix the system bus interrupt line to CPU core assignment.
Fixes: ddcf58e044 ("hw/arm/xilinx_zynq: Support up to two CPU cores")
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610052906.4432-1-sebastian.huber@embedded-brains.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
