fa48b43 "target-ppc: Remove hack for ppc_hash64_load_hpte*() with HV KVM"
purports to remove a hack in the handling of hash page tables (HPTs)
managed by KVM instead of qemu. However, it actually went in the wrong
direction.
That patch requires anything looking for an external HPT (that is one not
managed by the guest itself) to check both env->external_htab (for a qemu
managed HPT) and kvmppc_kern_htab (for a KVM managed HPT). That's a
problem because kvmppc_kern_htab is local to mmu-hash64.c, but some places
which need to check for an external HPT are outside that, such as
kvm_arch_get_registers(). The latter was subtly broken by the earlier
patch such that gdbstub can no longer access memory.
Basically a KVM managed HPT is much more like a qemu managed HPT than it is
like a guest managed HPT, so the original "hack" was actually on the right
track.
This partially reverts fa48b43, so we again mark a KVM managed external HPT
by putting a special but non-NULL value in env->external_htab. It then
goes further, using that marker to eliminate the kvmppc_kern_htab global
entirely. The ppc_hash64_set_external_hpt() helper function is extended
to set that marker if passed a NULL value (if you're setting an external
HPT, but don't have an actual HPT to set, the assumption is that it must
be a KVM managed HPT).
This also has some flow-on changes to the HPT access helpers, required by
the above changes.
Reported-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
When a Power cpu with 64-bit hash MMU has it's hash page table (HPT)
pointer updated by a write to the SDR1 register we need to update some
derived variables. Likewise, when the cpu is configured for an external
HPT (one not in the guest memory space) some derived variables need to be
updated.
Currently the logic for this is (partially) duplicated in ppc_store_sdr1()
and in spapr_cpu_reset(). In future we're going to need it in some other
places, so make some common helpers for this update.
In addition the new ppc_hash64_set_external_hpt() helper also updates
SDR1 in KVM - it's not updated by the normal runtime KVM <-> qemu CPU
synchronization. In a sense this belongs logically in the
ppc_hash64_set_sdr1() helper, but that is called from
kvm_arch_get_registers() so can't itself call cpu_synchronize_state()
without infinite recursion. In practice this doesn't matter because
the only other caller is TCG specific.
Currently there aren't situations where updating SDR1 at runtime in KVM
matters, but there are going to be in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Currently the getting and setting of Power MMU registers (sregs) take up
large inline chunks of the kvm_arch_get_registers() and
kvm_arch_put_registers() functions. Especially since there are two
variants (for Book-E and Book-S CPUs), only one of which will be used in
practice, this is pretty hard to read.
This patch splits these out into helper functions for clarity. No
functional change is expected.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
This adds a new POWER8+NVLink CPU PVR which core is identical to POWER8
but has a different PVR. The only available machine now has PVR
pvr 004c 0100 so this defines "POWER8NVL" alias as v1.0.
The corresponding kernel commit is
https://github.com/torvalds/linux/commit/ddee09c099c3
"powerpc: Add PVR for POWER8NVL processor"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The TAR special purpose register currently does not get migrated
under KVM because it does not get synchronized with the kernel.
Use spr_register_kvm() instead of spr_register() to fix this issue.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER8 / PowerISA 2.07 has a new special purpose register called PSPB
("Problem State Priority Boost Register"). The contents of this register
are currently lost during migration. To be able to migrate this register,
too, we've got to define this SPR along with the other SPRs of POWER8.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.
Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.
Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: 145641859552.30295.7821536833590725201.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using a CPU type that does not match the host is not possible when using
the kvm-hv kernel module - the PVR is checked in the kernel function
kvm_arch_vcpu_ioctl_set_sregs_hv() and rejected with -EINVAL if it
does not match the host.
However, when the user tries to specify a non-matching CPU type, QEMU
currently only reports "kvm_init_vcpu failed: Invalid argument", and
this is of course not very helpful for the user to solve the problem.
So this patch adds a more descriptive error message that tells the
user to specify "-cpu host" instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[Removed melodramatic '!' :)]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Setting the KVM_CAP_PPC_PAPR capability can fail if either the KVM
kernel module does not support it, or if the specified vCPU type
is not a 64-bit Book3-S CPU type. For example, the user can trigger
it easily with "-M pseries -cpu G2leLS" when using the kvm-pr kernel
module. So the error should not be reported with cpu_abort() since
this function is rather meant for reporting programming errors than
reporting user-triggerable errors (it prints out all CPU registers
and then calls abort() to kills the program - two things that the
normal user does not expect here) . So let's use error_report() with
exit(1) here instead.
A similar problem exists in the code that sets the KVM_CAP_PPC_EPR
capability, so while we're at it, fix that, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This hypercall either initializes a page with zeros, or copies
another page.
According to LoPAPR, the i-cache of the page should also be
flushed if using H_ICACHE_INVALIDATE or H_ICACHE_SYNCHRONIZE,
and the d-cache should be synchronized to the RAM if the
H_ICACHE_SYNCHRONIZE flag is used. For this, two new functions
are introduced, kvmppc_dcbst_range() and kvmppc_icbi()_range, which
use the corresponding assembler instructions to flush the caches
if running with KVM on Power. If the code runs with TCG instead,
the code only uses tb_flush(), assuming that this will be
enough for synchronization.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
With HV KVM, the guest's hash page table (HPT) is managed by the kernel and
not directly accessible to QEMU. This means that spapr->htab is NULL
and normally env->external_htab would also be NULL for each cpu.
However, that would cause ppc_hash64_load_hpte*() to do the wrong thing in
the few cases where QEMU does need to load entries from the in-kernel HPT.
Specifically, seeing external_htab is NULL, they would look for an HPT
within the guest's address space instead.
To stop that we have an ugly hack in the pseries machine type code to
set external htab to (void *)1 instead.
This patch removes that hack by having ppc_hash64_load_hpte*() explicitly
check kvmppc_kern_htab instead, which makes more sense.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The HMP command "info registers" produces somewhat different information on
different ppc cpu variants. For those with a hash MMU it's supposed to
include the SDR1, DAR and DSISR registers related to the MMU. However,
the switch is missing a couple of MMU model variants, meaning we will
miss out this information on certain CPUs which should have it.
This patch corrects the oversight. (Really these MMU model IDs need a big
cleanup, but we might as well fix the bug in the interim).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
This KVM stub implementation isn't used anywhere.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DCYp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-02-09' into staging
QAPI patches for 2016-02-09
# gpg: Signature made Tue 09 Feb 2016 10:55:51 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2016-02-09: (31 commits)
qapi: Add missing JSON files in build dependencies
qapi: Fix compilation failure on MIPS and SPARC
qmp: Don't abuse stack to track qmp-output root
qmp: Fix reference-counting of qnull on empty output visit
qapi: Drop unused error argument for list and implicit struct
qapi: Tighten qmp_input_end_list()
qapi: Drop unused 'kind' for struct/enum visit
qapi: Swap 'name' in visit_* callbacks to match public API
qom: Swap 'name' next to visitor in ObjectPropertyAccessor
qapi: Swap visit_* arguments for consistent 'name' placement
qom: Use typedef for Visitor
qapi: Don't cast Enum* to int*
qapi: Consolidate visitor small integer callbacks
qapi: Make all visitors supply uint64 callbacks
qapi: Prefer type_int64 over type_int in visitors
qapi-visit: Kill unused visit_end_union()
qapi: Track all failures between visit_start/stop
qapi: Improve generated event use of qapi visitor
balloon: Improve use of qapi visitor
vl: Ensure qapi visitor properly ends struct visit
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thus, use cpu_env as the parameter, not TCG_AREG0 directly.
Update all uses in the translators.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Here is the description of the mcrfs instruction from the PowerPC Architecture
Book, Version 2.02, Book I: PowerPC User Instruction Set Architecture
(http://www.ibm.com/developerworks/systems/library/es-archguide-v2.html), found
on page 120:
The contents of FPSCR field BFA are copied to Condition Register field BF.
All exception bits copied are set to 0 in the FPSCR. If the FX bit is
copied, it is set to 0 in the FPSCR.
Special Registers Altered:
CR field BF
FX OX (if BFA=0)
UX ZX XX VXSNAN (if BFA=1)
VXISI VXIDI VXZDZ VXIMZ (if BFA=2)
VXVC (if BFA=3)
VXSOFT VXSQRT VXCVI (if BFA=5)
However, currently every bit in FPSCR field BFA is set to 0, including ones not
on that list.
This can be seen in the following simple C program:
#include <fenv.h>
#include <stdio.h>
int main(int argc, char **argv) {
int ret;
ret = fegetround();
printf("Current rounding: %d\n", ret);
ret = fesetround(FE_UPWARD);
printf("Setting to FE_UPWARD (%d): %d\n", FE_UPWARD, ret);
ret = fegetround();
printf("Current rounding: %d\n", ret);
ret = fegetround();
printf("Current rounding: %d\n", ret);
return 0;
}
which gave the output (before this commit):
Current rounding: 0
Setting to FE_UPWARD (2): 0
Current rounding: 2
Current rounding: 0
instead of (after this commit):
Current rounding: 0
Setting to FE_UPWARD (2): 0
Current rounding: 2
Current rounding: 2
The relevant disassembly is in fegetround(), which, on my system, is:
__GI___fegetround:
<+0>: mcrfs cr7, cr7
<+4>: mfcr r3
<+8>: clrldi r3, r3, 62
<+12>: blr
What happens is that, the first time fegetround() is called, FPSCR field 7 is
retrieved. However, because of the bug in mcrfs, the entirety of field 7 is set
to 0, which includes the rounding mode.
There are other issues this will fix, such as condition flags not persisting
when they should if read, and if you were to read a specific field with some
exception bits set, but no others were set in the entire register, then the
bits would be cleared correctly, but FEX/VX would not be updated to 0 as they
should be.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the TCG and spapr code has been extended to allow (semi-)
arbitrary page encodings in the CPU's 'sps' table, we can add the many
page sizes supported by real POWER7 and POWER8 hardware that we previously
didn't support in TCG.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
h_enter() in the spapr code needs to know the page size of the HPTE it's
about to insert. Unlike other paths that do this, it doesn't have access
to the SLB, so at the moment it determines this with some open-coded
tests which assume POWER7 or POWER8 page size encodings.
To make this more flexible add ppc_hash64_hpte_page_shift_noslb() to
determine both the "base" page size per segment, and the individual
effective page size from an HPTE alone.
This means that the spapr code should now be able to handle any page size
listed in the env->sps table.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
When HPTEs are removed or modified by hypercalls on spapr, we need to
invalidate the relevant pages in the qemu TLB.
Currently we do that by doing some complicated calculations to work out the
right encoding for the tlbie instruction, then passing that to
ppc_tlb_invalidate_one()... which totally ignores the argument and flushes
the whole tlb.
Avoid that by adding a new flush-by-hpte helper in mmu-hash64.c.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Currently both the tlbiva instruction (used on 44x chips) and the tlbie
instruction (used on hash MMU chips) are both handled via
ppc_tlb_invalidate_one(). This is silly, because they're invoked from
different places, and do different things.
Clean this up by separating out the tlbiva instruction into its own
handling. In fact the implementation is only a stub anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
ppc_tlb_invalidate_one() has a big switch handling many different MMU
types. However, most of those branches can never be reached:
It is called from 3 places: from remove_hpte() and h_protect() in
spapr_hcall.c (which always has a 64-bit hash MMU type), and from
helper_tlbie() in mmu_helper.c.
Calls to helper_tlbie() are generated from gen_tlbiel, gen_tlbiel and
gen_tlbiva. The first two are only used with the PPC_MEM_TLBIE flag,
set only with 32-bit or 64-bit hash MMU models, and gen_tlbiva() is
used only on 440 and 460 models with the BookE mmu model.
These means the exhaustive list of MMU types which may call
ppc_tlb_invalidate_one() is: POWERPC_MMU_SOFT_6xx, POWERPC_MMU_601,
POWERPC_MMU_32B, POWERPC_MMU_SOFT_74xx, POWERPC_MMU_64B, POWERPC_MMU_2_03,
POWERPC_MMU_2_06, POWERPC_MMU_2_07 and POWERPC_MMU_BOOKE.
Clean up by removing logic for all other MMU types from
ppc_tlb_invalidate_one().
This means that ppc4xx_tlb_invalidate_virt() now has no callers, or rather,
makes it obvious that it has no callers. So, we remove that function as
well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present the 64-bit hash MMU code uses information from the SLB to
determine the page size of a translation. We do need that information to
correctly look up the hash table. However the MMU also allows a
possibly larger page size to be encoded into the HPTE itself, which is used
to populate the TLB. At present qemu doesn't check that, and so doesn't
support the MPSS "Multiple Page Size per Segment" feature.
This makes a start on allowing this, by adding an hpte_page_shift()
function which looks up the page size of an HPTE. We use this to validate
page sizes encodings on faults, and populate the qemu TLB with larger
page sizes when appropriate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Currently, the ppc_hash64_page_shift() function looks up a page size based
on information in an SLB entry. It open codes the bit translation for
existing CPUs, however different CPU models can have different SLB
encodings. We already store those in the 'sps' table in CPUPPCState, but
we don't currently enforce that that actually matches the logic in
ppc_hash64_page_shift.
This patch reworks lookup of page size from SLB in several ways:
* ppc_store_slb() will now fail (triggering an illegal instruction
exception) if given a bad SLB page size encoding
* On success ppc_store_slb() stores a pointer to the relevant entry in
the page size table in the SLB entry. This is looked up directly from
the published table of page size encodings, so can't get out ot sync.
* ppc_hash64_htab_lookup() and others now use this precached page size
information rather than decoding the SLB values
* Now that callers have easy access to the page_shift,
ppc_hash64_pte_raddr() amounts to just a deposit64(), so remove it and
have the callers use deposit64() directly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
ppc_store_slb updates the SLB for PPC cpus with 64-bit hash MMUs.
Currently it takes two parameters, which contain values encoded as the
register arguments to the slbmte instruction, one register contains the
ESID portion of the SLBE and also the slot number, the other contains the
VSID portion of the SLBE.
We're shortly going to want to do some SLB updates from other code where
it is more convenient to supply the slot number and ESID separately, so
rework this function and its callers to work this way.
As a bonus, this slightly simplifies the emulation of segment registers for
when running a 32-bit OS on a 64-bit CPU.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Like a lot of places these files include a mixture of functions taking
both the older CPUPPCState *env and newer PowerPCCPU *cpu. Move a step
closer to cleaning this up by standardizing on PowerPCCPU, except for the
helper_* functions which are called with the CPUPPCState * from tcg.
Callers and some related functions are updated as well, the boundaries of
what's changed here are a bit arbitrary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
This stub function is in the !KVM ifdef in target-ppc/kvm_ppc.h. However
no such function exists on the KVM side, or is ever used.
I think this originally referenced a function which read host page size
information from /proc, for we we now use the KVM GET_SMMU_INFO extension
instead.
In any case, it has no function now, so remove it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Add the XML and functions to get and set VSX registers.
Signed-off-by: Anton Blanchard <anton@samba.org>
(fixed little-endian guests)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Let's reuse the ppc_maybe_bswap_register() helper, like we already do
with the general registers.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Altivec registers are 128-bit wide. They are stored in memory as two
64-bit values that must be byteswapped when the guest is little-endian.
Let's reuse the ppc_maybe_bswap_register() helper for this.
We also need to fix the ordering of the 64-bit elements according to
the target endianness, for both system and user mode.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This helper will be used to support Altivec registers in little-endian guests.
This patch does not change functionnality.
Note: I had to put the helper some lines away from the gdb_*_avr_reg()
routines to get a more readable patch.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Let's reuse the ppc_maybe_bswap_register() helper, like we already do
with the general registers.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This helper will be used to support FP, Altivec and VSX registers when
the guest is little-endian.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On VSX capable CPUs, the 32 FP registers are mapped to the high-bits
of the 32 first VSX registers. So if you have:
VSR31 = (uint128) 0x0102030405060708090a0b0c0d0e0f00
then
FPR31 = (uint64) 0x0102030405060708
The kernel stores the VSX registers in the fp_state struct following the
host endian element ordering.
On big-endian:
fp_state.fpr[31][0] = 0x0102030405060708
fp_state.fpr[31][1] = 0x090a0b0c0d0e0f00
On little-endian:
fp_state.fpr[31][0] = 0x090a0b0c0d0e0f00
fp_state.fpr[31][1] = 0x0102030405060708
The KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls preserve this ordering, but
QEMU considers it as big-endian and always copies element [0] to the
fpr[] array and element [1] to the vsr[] array. This does not work with
little-endian hosts, and you will get:
(qemu) p $f31
0x90a0b0c0d0e0f00
instead of:
(qemu) p $f31
0x102030405060708
This patch fixes the element ordering for little-endian hosts.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Current ppc_set_compat() returns -1 for errors, and also (unconditionally)
reports an error message. The caller in h_client_architecture_support()
may then report it again using an outdated fprintf().
Clean this up by using the modern error reporting mechanisms. Also add
strerror(errno) to the error message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Otherwise some internal xer variables fail to get set post-migration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We never released anything older than POWER8 DD2.0 and POWER8E DD2.1,
so let's use these versions, without that some firmware or Linux code
might fail to use some HW features that were non functional in earlier
internal only spins of the chip.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
This patch provides the name of the architecture in the target.xml
if available.
This allows the remote gdb to detect the target architecture on its
own - so there is no need to specify it manually (e.g. if gdb is
started without a binary) using "set arch *arch_name*".
The name of the architecture is provided by a callback that can
be implemented by all architectures. The arm implementation has
special handling for iwmmxt and returns arm otherwise. This can
be extended if necessary.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[rework to use a callback]
Message-Id: <1449144881-130935-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Only one of three architectures implementing qmp-dump-guest-memory write
qemu notes. And, another architecture (arm/aarch64) is coming, which
won't use them either. Make the common implementation truly common.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extract code from the function kvmppc_read_int_cpu_dt() that actually
reads the file into a separate function, so it can be called from
other places.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Avoid "naked" qemu_log, bring documentation for DEBUG #defines
up to date.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently in TCG mode, updating floating exception
summary bit (FPSCR_FX) in fpscr also updates
the upper 32bits of fpscr with all 1s.
Modify the bit shift operation statement to use
1ULL instead.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the FPSCR bit update macros defined in dfp_helper
to cpu.h. This way, fpu_helper functions can also use them
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment get_monitor_def() returns only registers from statically
defined monitor_defs array. However there is a lot of BOOK3S SPRs
which are not in the list and cannot be printed from the monitor.
This adds a new target platform hook - target_get_monitor_def().
The hook is called if a register was not found in the static
array returned by the target_monitor_defs() hook.
The hook is only defined for POWERPC, it returns registered
SPRs and fails on unregistered ones providing the user with information
on what is actually supported on the running CPU. The register value is
saved as uint64_t as it is the biggest supported register size;
target_ulong cannot be used because of the stub - it is in a "common"
code and cannot include "cpu.h", etc; this is also why the hook prototype
is redefined in the stub instead of being included from some header.
This replaces static descriptors for GPRs, FPRs, SRs with a helper which
looks for a value in a corresponding array in the CPUPPCState.
The immediate effect is that all 32 SRs can be printed now (instead of 16);
later this can be reused for VSX or TM registers.
This replaces callbacks for MSR and XER with static descriptors in
monitor_defs as they are stored in CPUPPCState.
While we are here, this adds "cr" as a synonym of "ccr".
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The lswx instruction checks whether the desired string actually fits
into all defined registers. Unfortunately it does the calculation wrong,
resulting in illegal instruction traps for loads that really should fit.
Fix it up, making Mac OS happier.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the ISA setting the Rc bit on mtspr is undefined behavior.
Real 750 hardware simply ignores the bit and doesn't touch cr0 though.
Unfortunately, Mac OS 9 relies on this fact and executes a few mtspr
instructions (to set XER for example) with Rc set.
So let's handle the bit the same way hardware does and ignore it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The !CONFIG_KVM implementation of kvmppc_reset_htab() returns -1
by default. Change this to return 0 so that we fall back to user space
HTAB allocation for emulated guests.
This fixes the make check failures for ppc64 emulated target.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit aa4bb58752 (ppc: Add mmu_model defines for arch 2.03 and 2.07)
removed the mmu_model definition POWERPC_MMU_2_06a which is needed by
PR KVM. Reintroduce it and also add POWERPC_MMU_2_07a.
This fixes QEMU crash (qemu: fatal: Unknown MMU model) during booting
of PR KVM guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix the index used to read the IBAT's vector which results in IBAT0..3 instead
of IBAT4..N.
The bug appeared by saving/restoring contexts including IBATs values.
Signed-off-by: Julio Guerra <julio@farjump.io>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some targets already had this within their logic, but make sure
it's present for all targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
LoPAPR defines a "ibm,pa-features" per-CPU device tree property which
describes extended features of the Processor Architecture.
This adds the property to the device tree. At the moment this is the
copy of what pHyp advertises except "I=1 (cache inhibited) Large Pages"
which is enabled for TCG and disabled when running under HV KVM host
with 4K system page size.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log, moved ci_large_pages initialization,
renamed pa_features arrays]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This removes unused POWERPC_MMU_2_06a/POWERPC_MMU_2_06d.
This replaces POWERPC_MMU_64B with POWERPC_MMU_2_03 for POWER5+ to be
more explicit about the version of the PowerISA supported.
This defines POWERPC_MMU_2_07 and uses it for the POWER8 CPU family.
This will not have an immediate effect now but it will in the following
patch.
This should cause no behavioural change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The vfio_accel parameter used when creating a new TCE table (guest IOMMU
context) has a confusing name. What it really means is whether we need the
TCE table created to be able to support VFIO devices.
VFIO is relevant, because when available we use in-kernel acceleration of
the TCE table, but that may not work with VFIO devices because updates to
the table are handled in kernel, bypass qemu and so don't hit qemu's
infrastructure for keeping the VFIO host IOMMU state in sync with the guest
IOMMU state.
Rename the parameter to "need_vfio" throughout. This is a cosmetic change,
with no impact on the logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
In-kernel ITS emulation on ARM64 will require to supply requester IDs.
These IDs can now be retrieved from the device pointer using new
pci_requester_id() function.
This patch adds pci_dev pointer to KVM GSI routing functions and makes
callers passing it.
x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c
also made passing PCI device pointer instead of NULL for consistency with
the rest of the code.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.
This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties. Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1. Example reproducer:
$ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
Aborted (core dumped)
[Exit 134 (SIGABRT)]
Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:
* Hang during cleanup (didn't debug, so I can't say why):
"realview_pci", "versatile_pci".
* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
"fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
CPUs
* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
"host-powerpc64-cpu", "host-embedded-powerpc-cpu",
"host-powerpc-cpu" (the powerpc ones can't currently reach the
assertion, because the CPUs are only registered when KVM is enabled,
but the assertion is arguably in the wrong place all the same)
Make qmp_device_list_properties() fail cleanly when the device is so
marked. This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails". Not a complete fix, just
a better-than-nothing work-around. In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".
This also protects -device FOO,help, which uses the same machinery
since commit ef52358 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2. Example reproducer:
$ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help
Before:
qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
After:
Can't list properties of device 'pxa2xx-pcmcia'
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
It is no longer used, so tidy up everything reached by it.
This includes the gen_opc_* arrays, the search_pc parameter
and the inline gen_intermediate_code_internal functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The gen_opc_* arrays are already redundant with the data stored in
the insn_start arguments. Transition restore_state_to_opc to use
data from the latter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Adjust all translators to respect it.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This symbol no longer exists.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reduce the boilerplate required for each target. At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.
Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This does tidy the icount test common to all targets.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc. This puts gen_io_start et al on the
"correct" side of the marker.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
With an eye toward making it mandatory.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rename ELF_MACHINE to be PPC specific. This is used as-is by the
various PPC bootloaders and is locally defined to ELF_MACHINE in linux
user in PPC specific ifdeffery.
This removes another architecture specific definition from the global
namespace (as desired by multi-arch).
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PAPR interface defines a hypercall to pass high-quality
hardware generated random numbers to guests. Recent kernels can
already provide this hypercall to the guest if the right hardware
random number generator is available. But in case the user wants
to use another source like EGD, or QEMU is running with an older
kernel, we should also have this call in QEMU, so that guests that
do not support virtio-rng yet can get good random numbers, too.
This patch now adds a new pseudo-device to QEMU that either
directly provides this hypercall to the guest or is able to
enable the in-kernel hypercall if available. The in-kernel
hypercall can be enabled with the use-kvm property, e.g.:
qemu-system-ppc64 -device spapr-rng,use-kvm=true
For handling the hypercall in QEMU instead, a "RngBackend" is
required since the hypercall should provide "good" random data
instead of pseudo-random (like from a "simple" library function
like rand() or g_random_int()). Since there are multiple RngBackends
available, the user must select an appropriate back-end via the
"rng" property of the device, e.g.:
qemu-system-ppc64 -object rng-random,filename=/dev/hwrng,id=gid0 \
-device spapr-rng,rng=gid0 ...
See http://wiki.qemu-project.org/Features-Done/VirtIORNG for
other example of specifying RngBackends.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For setting debug watchpoints, sPAPR guests use H_SET_MODE hypercall.
The existing QEMU H_SET_MODE handler does not support this but
the KVM handler in HV KVM does. However it is not enabled.
This enables the in-kernel H_SET_MODE handler which handles:
- Completed Instruction Address Breakpoint Register
- Watch point 0 registers.
The rest is still handled in QEMU.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The xscmpodp and xscmpudp instructions only have the AX, BX bits in
there encoding, the lowest bit (usually TX) is marked as an invalid
bit. We therefore can't decode them with GEN_XX2FORM, which decodes
the two lowest bit.
Introduce a new form GEN_XX2FORM, which decodes AX and BX and mark
the lowest bit as invalid.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For vector instructions, the helpers get pointers to the vector register
in arguments. Some operands might point to the same register, including
the operand holding the result.
When emulating instructions which access the vector elements in a
non-linear way, we need to store the result in an temporary variable.
This fixes openssl when emulating a POWER8 CPU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
We are setting SRR0 to the instruction before the one causing the
unaligned exception. A quick testcase:
. = 0x100
.globl _start
_start:
/* Cause a 0x600 */
li 3,0x1
stwcx. 3,0,3
1: b 1b
. = 0x600
1: b 1b
Built into something we can load as a BIOS image:
gcc -mbig -c test.S
ld -EB -Ttext 0x0 -o test test.o
objcopy -O binary test test.bin
Run with:
qemu-system-ppc64 -nographic -bios test.bin
Shows an incorrect SRR0 (points at the li):
SRR0 0000000000000100
With the patch we get the correct SRR0:
SRR0 0000000000000104
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
QEMU does have an I/O thread now, that can be interrupted at any time
because the VCPU thread runs outside the iothread mutex.
Therefore, the kvmppc_timer_hack is obsolete. Remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery. The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.
Scripted conversion for target-* change:
for I in target-*/cpu.h; do
sed -i \
's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
$I;
done
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The callers (most of them in target-foo/cpu.c) to this function all
have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from
core code (in exec.c).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move cpu_exec_init() call from instance_init to realize. This allows
any failures from cpu_exec_init() to be handled appropriately.
Also add corresponding cpu_exec_exit() call from unrealize.
cpu_dt_id assignment from instance_init is no longer needed since
correct assignment for cpu_dt_id is already present in realizefn.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[AF: Keep calling cpu_exec_init() for CONFIG_USER_ONLY]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add an Error argument to cpu_exec_init() to let users collect the
error. This is in preparation to change the CPU enumeration logic
in cpu_exec_init(). With the new enumeration logic, cpu_exec_init()
can fail if cpu_index values corresponding to max_cpus have already
been handed out.
Since all current callers of cpu_exec_init() are from instance_init,
use error_abort Error argument to abort in case of an error.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVnQWdAAoJEL/70l94x66D6OgIAKJlzQfmy5w7Q9WD4vCMhD76
JrpLSsn7Gx/Bws0Nu9nLQlqun5z4hiUxyG2kP/WqD9+tV3cpSMSyrG6ImVdqKnQ5
+Z8WJZuREkQv0aqDUjQVST+eIDZuh2LWJXAjhgsCXUHY77eWb/7WmKT79xJOa+5C
5xB1qxudqX5IsTvpiKKPbmUGYkAcvRX1dUSaFwRIMO0UyKn59B9WfM9a5slIbLW7
XfI8+wEJshTVLuQkkTfdidWQc5M5DwlmO7ESUNR/BRPCPFeyjcDqgQY5pBM5XVo9
C+S0R3zIt3Ew0fhCtLRyjlIT0bGfwjbU5HRiHcyldBKhNUZZjSUoOWJnYRHXUDY=
=H8wA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes and Daniel Berrange's crypto library.
# gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ossaudio: fix memory leak
ui: convert VNC to use generic cipher API
block: convert qcow/qcow2 to use generic cipher API
ui: convert VNC websockets to use crypto APIs
block: convert quorum blockdrv to use crypto APIs
crypto: add a nettle cipher implementation
crypto: add a gcrypt cipher implementation
crypto: introduce generic cipher API & built-in implementation
crypto: move built-in D3DES implementation into crypto/
crypto: move built-in AES implementation into crypto/
crypto: introduce new module for computing hash digests
vl: move rom_load_all after machine init done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current PPC code relies on -mem-path being used in order for
hugepage support to be detected. With the introduction of
MemoryBackendFile we can now handle this via:
-object memory-file-backend,mem-path=...,id=hugemem0 \
-numa node,id=mem0,memdev=hugemem0
Management tools like libvirt treat the 2 approaches as
interchangeable in some cases, which can lead to user-visible
regressions even for previously supported guest configurations.
Fix these by also iterating through any configured memory
backends that may be backed by hugepages.
Since the old code assumed hugepages always backed the entirety
of guest memory, play it safe an pick the minimum across the
max pages sizes for all backends, even ones that aren't backed
by hugepages.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
To prepare for a generic internal cipher API, move the
built-in AES implementation into the crypto/ directory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This opens the path to get rid of the iothread lock on vmexits in KVM
mode. On x86, the in-kernel irqchips has to be used because we otherwise
need to synchronize APIC and other per-cpu state accesses that could be
changed concurrently.
Regarding pre/post-run callbacks, s390x and ARM should be fine without
specific locking as the callbacks are empty. MIPS and POWER require
locking for the pre-run callback.
For the handle_exit callback, it is non-empty in x86, POWER and s390.
Some POWER cases could do without the locking, but it is left in
place for now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1434646046-27150-7-git-send-email-pbonzini@redhat.com>
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu currently implements the hypercalls H_LOGICAL_CI_LOAD and
H_LOGICAL_CI_STORE as PAPR extensions. These are used by the SLOF firmware
for IO, because performing cache inhibited MMIO accesses with the MMU off
(real mode) is very awkward on POWER.
This approach breaks when SLOF needs to access IO devices implemented
within KVM instead of in qemu. The simplest example would be virtio-blk
using an iothread, because the iothread / dataplane mechanism relies on
an in-kernel implementation of the virtio queue notification MMIO.
To fix this, an in-kernel implementation of these hypercalls has been made,
(kernel commit 99342cf "kvmppc: Implement H_LOGICAL_CI_{LOAD,STORE} in KVM"
however, the hypercalls still need to be enabled from qemu. This performs
the necessary calls to do so.
It would be nice to provide some warning if we encounter a problematic
device with a kernel which doesn't support the new calls. Unfortunately,
I can't see a way to detect this case which won't either warn in far too
many cases that will probably work, or which is horribly invasive.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs.
These are then passed to address_space_rw.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The invalidation code introduced in commit 2360b works by inverting most bits
of env->msr to ensure that hreg_store_msr() will forcibly update the CPU env
state to reflect the new msr value post-migration. Unfortunately
hreg_store_msr() is called with alter_hv set to 0 which preserves the MSR_HVB
state from the CPU env which is now the opposite value to what it should be.
Ensure that we don't invalidate the msr MSR_HVB bit during cpu_post_load so
that the correct value is restored. This fixes suspend/resume for PPC64.
Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1429255009-12751-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IBM uses low 16bits to specify the chip version of a POWER CPU.
So there has never been an actual silicon with PVR = 0x003B0000.
The first silicon would have PVR 0x003B0100 but it is very unlikely
to find it in any machine shipped to any customer as it was too raw.
This removes CPU_POWERPC_POWER5P_v00 definition and changes
POWER5+ and POWERgs aliases (which are synonyms) to point to
POWER5+_v2.1 which can still be found in real machines.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[agraf: fix commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVAH/uAAoJECgfDbjSjVRprq0H/iyqLSHQIv6gNOPYQbLXOCv0
pkCeLx6kTMO9lSwxZcsZvMsYPeiEL3CHRKJcEjq0+Ap0uen0pa2Yl3WzyJcnBcib
xwkHk/UftFYAiZAzVtd4moXujvVLYNL1ukvr/wPOdIkTEn8U6K3NaT3pLooc369f
oTyQhlL3E9HJ5S6X0HXJIFwtsOIhPfS3NCLoDFbFjtb9mIsqTx7N5s2C5hctF+ir
JtyuwPx5oT73WYxoYmjSP6n/Nf5cuJdqtm6o2KijjhWWYMJ6epYVBo/DD6dIFbmJ
V/23dxpon+lvhae2c2LAVrkiJ1Boon/eMbJK/mNwpFX7vW35ataLPy6pYpaiEJs=
=RUld
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
misc fixes and cleanups
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio-scsi: remove empty wrapper for cmd
virtio-scsi: clean out duplicate cdb field
virtio-scsi: fix cdb/sense size
uapi/virtio_scsi: allow overriding CDB/SENSE size
virtio-scsi: drop duplicate CDB/SENSE SIZE
exec: don't include hw/boards for linux-user
acpi: specify format for build_append_namestring
MAINTAINERS: drop aliguori@amazon.com
tpm: Move memory subregion function into realize function
virtio-pci: Convert to realize()
pci: Convert pci_nic_init() to Error to avoid qdev_init()
machine: query mem-merge machine property
machine: query dump-guest-core machine property
hw/boards: make it safe to include for linux-user
machine: query phandle-start machine property
machine: query kvm-shadow-mem machine property
kvm: add machine state to kvm_arch_init
machine: query kernel-irqchip property
machine: allowed/required kernel-irqchip support
machine: replace qemu opts with iommu property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Needed to query machine's properties.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
5b79b1c "target-ppc: Create versionless CPU class per family if KVM" added
a dynamic CPU class registration with the name of the CPU family which
QEMU is running on. For example, this allowed specifying "-cpu POWER7"
on every version of POWER7 machine, not just the one which POWER7 was
an alias of. I.e. before 5b79b1c, "-cpu POWER7" would not work on real
POWER7 2.1 and would work on POWER7 2.3 only. The same story for POWER8.
However that patch broke POWER5+ support as POWER5+ CPU uses the same
name as the CPU class so dynamic registering of the POWER5+ class failed.
This redefines POWER5+ server CPUs by adding a version to them and adding
an alias for TCG case. KVM will use dynamically registered CPUs.
While we are here, do the same for 970 CPU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds basic support for the VTB.
PowerISA:
The Virtual Time Base (VTB) is a 64-bit incrementing counter.
Virtual Time Base increments at the same rate as the Time Base until its value
becomes 0xFFFF_FFFF_FFFF_FFFF (2 64 - 1); at the next increment its value
becomes 0x0000_0000_0000_0000. There is no interrupt or other indication when
this occurs.
The operation of the Virtual Time Base has the following additional
properties.
1. Loading a GPR from the Virtual Time Base has no effect on the accuracy of
the Virtual Time Base.
2. Copying the contents of a GPR to the Virtual Time Base replaces the
contents of the Virtual Time Base with the contents of the GPR.
Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since env->msr has already been restored by the time cpu_post_load is called,
make sure that ppc_store_msr() is explicitly called with all msr bits except
MSR_TGPR marked as invalid.
This solves the issue where MSR flags aren't set correctly when restoring a VM
snapshot, in particular the internal env->excp_prefix value when MSR_EP has
been altered by a guest.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
Otherwise when cpu_post_load calls ppc_store_sdr1() when restoring a VM
snapshot the value is deemed unchanged and so the internal env->htab*
variables aren't set correctly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We look at two sizes specified in ISA (4K, 64K). If not found matching,
we consider it 16MB.
Without this patch we would fail to lookup address above 16MB range.
Below 16MB happened to work before because the kernel have a liner
mapping and we always looked up hash for 0xc000000000000000. The
actual real address was computed by using the 16MB offset
with the real address found with the above hash.
Without Fix:
(gdb) x/16x 0xc000000001000000
0xc000000001000000 <list_entries+453208>: Cannot access memory at address 0xc000000001000000
(gdb)
With Fix:
(gdb) x/16x 0xc000000001000000
0xc000000001000000 <list_entries+453208>: 0x00000000 0x00000000 0x00000000 0x00000000
0xc000000001000010 <list_entries+453224>: 0x00000000 0x00000000 0x00000000 0x00000000
0xc000000001000020 <list_entries+453240>: 0x00000000 0x00000000 0x00000000 0x00000000
0xc000000001000030 <list_entries+453256>: 0x00000000 0x00000000 0x00000000 0x00000000
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
on s390 MSI-X irqs are presented as thin or adapter interrupts
for this we have to reorganize the routing entry to contain
valid information for the adapter interrupt code on s390.
To minimize impact on existing code we introduce an architecture
function to fixup the routing entry.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
New year's release. This time's highlights:
- E500: More RAM support
- pseries: New SLOF release
- Migration fixes
- Simplify USB spawning logic, removes support for explicit usb=off
- TCG: Simple untansactional TM emulation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=28q1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2015-01-07
New year's release. This time's highlights:
- E500: More RAM support
- pseries: New SLOF release
- Migration fixes
- Simplify USB spawning logic, removes support for explicit usb=off
- TCG: Simple untansactional TM emulation
# gpg: Signature made Wed 07 Jan 2015 15:19:37 GMT using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-ppc-for-upstream: (37 commits)
hw/ppc/mac_newworld: simplify usb controller creation logic
hw/ppc/spapr: simplify usb controller creation logic
hw/ppc/mac_newworld: QOMified mac99 machines
hw/usb: simplified usb_enabled
hw/machine: added machine_usb wrapper
hw/ppc: modified the condition for usb controllers to be created for some ppc machines
target-ppc: Cast ssize_t to size_t before printing with %zx
target-ppc: Mark SR() and gen_sync_exception() as !CONFIG_USER_ONLY
PPC: e500: Fix GPIO controller interrupt number
target-ppc: Introduce Privileged TM Noops
target-ppc: Introduce tcheck
target-ppc: Introduce TM Noops
target-ppc: Introduce tbegin
target-ppc: Introduce TEXASRU Bit Fields
target-ppc: Power8 Supports Transactional Memory
target-ppc: Introduce tm_enabled Bit to CPU State
target-ppc: Introduce Feature Flag for Transactional Memory
target-ppc: Introduce Instruction Type for Transactional Memory
pseries: Update SLOF firmware image to 20141202
PPC: Fix crash on spapr_tce_table_finalize()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The functions SR() and gen_sync_exception() are only used in softmmu
configs; wrap them in #ifndef CONFIG_USER_ONLY to suppress clang warnings
on the linux-user builds.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add the supervisory Transactional Memory instructions treclaim. and
trechkpt. The implementation is a degenerate one that simply
checks privileged state, TM availability and then sets CR[0] to
0b0000, just like the unprivileged noops.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a degenerate implementation of the Transaction Check (tcheck)
instruction. Since transaction always immediately fail, this
implementation simply sets CR[BF] to 0b1000, i.e. TDOOMED = 1
and MSR[TS] == 0.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add degenerate implementations of the non-privileged Transactional
Memory instructions tend., tabort*. and tsr. This implementation
simply checks the MSR[TM] bit and then sets CR0 to 0b0000. This
is a reasonable degenerate implementation since transactions are
never allowed to begin and hence MSR[TS] is always 0b00.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide a degenerate implementation of the tbegin instruction. This
implementation always fails the transaction, recording the failure
per Book II Section 5.3.2 of the Power ISA V2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Define mnemonics for the various bit fields in the Transaction
EXception And Summary Register (TEXASR).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Power8 processor implements the Transactional Memory Facility
as defined in Power ISA 2.07. Update the initialization code to
indicate this.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a bit (tm_enabled) to CPU state that mirrors the MSR[TM] bit.
This is analogous to the other "available" bits in the MSR (FP,
VSX, etc.).
NOTE: Since MSR[TM] occupies big-endian bit 31, the code is wrapped
with a PPC64 bit check.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a flag (POWERPC_FLAG_TM) for the Transactional Memory
Facility introduced in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a category (PPC2_TM) for the Transactional Memory instructions
introduced in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, when the page tables are saved, the kvm_get_htab_header structs
and the ptes are assumed being big endian and dumped as a indistinct blob
in the statefile. This is no longer true when the host is little endian
and this breaks restoration.
This patch unfolds the kvmppc_save_htab routine to write explicitly the
kvm_get_htab_header structs in big endian. The ptes are left untouched.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The set_fprf argument to the helper_compute_fprf helper function
is no longer necessary -- the helper is only invoked when FPSCR[FPRF]
is going to be set.
Eliminate the unnecessary argument from the function signature and
its corresponding implementation. Change the return value of the
helper to "void". Update the name of the local variable "ret" to
"fprf", which now makes more sense.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The set_fprf argument to the gen_compute_fprf() utility is no longer
needed -- gen_compute_fprf() is now called only when FPRF is actually
computed and set. Eliminate the obsolete argument.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eliminate the set_rc argument from the gen_compute_fprf utility and
the corresponding (and incorrect) implementation. Replace it with
calls to the gen_set_cr1_from_fpscr() utility.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Update the Move From FPSCR (mffs.) instruction to correctly
set CR[1] from FPSCR[FX,FEX,VX,OX].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Floating Point Move instructions (fmr., fabs., fnabs., fneg.,
and fcpsgn.) incorrectly copy FPSCR[FPCC] instead of [FX,FEX,VX,OX].
Furthermore, the current code does this via a call to gen_compute_fprf,
which is awkward since these instructions do not actually set FPRF.
Change the code to use the gen_set_cr1_from_fpscr utility.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: whitespace fixes]
Signed-off-by: Alexander Graf <agraf@suse.de>
The Power ISA square root instructions (fsqrt[s], frsqrte[s]) must
set the FPSCR[VXSQRT] flag when operating on a negative value.
However, NaNs have no sign and therefore this flag should not
be set when operating on one.
Change the order of the checks in the helper code. Move the
SNaN-to-QNaN macro to the top of the file so that it can be
re-used.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Load Vector Element Indexed and Store Vector Element Indexed
instructions compute an effective address in the usual manner.
However, they truncate that address to the natural boundary.
For example, the lvewx instruction will ignore the least significant
two bits of the address and thus load the aligned word of storage.
Fix the generators for these instruction to properly perform this
truncation.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running barebox on qemu-system-mips* with '-d unimp' overloads
stderr by very very many mips_cpu_handle_mmu_fault() messages:
mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3
mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3
mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0
So it's very difficult to find LOG_UNIMP message.
The mips_cpu_handle_mmu_fault() messages appear on enabling ANY
logging! It's not very handy.
Adding separate log category for *_cpu_handle_mmu_fault()
logging fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Move to Vector Status and Control Register (mtvscr) instruction
uses VRB as the source register. Fix the code generator to correctly
decode the VRB field. That is, use "rB(ctx->opcode)" instead of
"rD(ctx->opcode)".
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
In the previous patch, the registers were added to init_proc_G2LE
instead of init_proc_e300.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Correct the opcodes for the vrfim, vrfin and vrfiz instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of Vector Compare Bounds Single Precision.
Specifically, fix the case where the operands are unordered -- since
the result is non-zero, the CR[6] field should be set to zero.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of the Altivec shift left and shift right
instructions (vsl, vsr) which erroneously inverts shift direction
on big endian hosts.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch simplifies the AES code, by directly accessing the newly added
S-Box, InvS-Box tables instead of recreating them by using the AES_Te and
AES_Td tables.
Cc: Alexander Graf <agraf@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The MMU index is an internal detail that should not be needed by the
translator (except to generate loads and stores). Look at the MSR
directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
strncat() will append additional '\0' to destination buffer, so need
additional 1 byte for it, or may cause memory overflow, just like other
area within QEMU have done.
And can use g_strdup_printf() instead of strncat(), which may be more
easier understanding.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Opcode table has direct, indirect and double indirect handlers, but
ppc_cpu_unrealizefn() frees direct handlers which are never allocated
and never frees double indirect handlers.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Define and use macros instead of direct numbers wherever
possible in ppc opcodes table handling code.
This doesn't change any code functionality.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add a new processor type 440x5wDFPU for Virtex 5 PPC440
with an external APU FPU in double precision mode
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch remove limitation for fc[tf]id[*] on 32 bits targets and
add a new insn flag for signed integer 64 conversion PPC2_FP_CVT_S64
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Adjust the IVOR mask for generic Book E implementation to support bit 59.
This is consistent with the Power ISA.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reported-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
By mistake, QEMU uses the maximum compatibility level from the command
line instead of the value negotiated in client-architecture-support call.
This replaces @max_compat with @cpu_version. This only affects guests
which do not support the host CPU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
