Commit Graph

90806 Commits

Author SHA1 Message Date
Mark Cave-Ayland
3b10b5673c macfb: use memory_region_init_ram() in macfb_common_realize() for the framebuffer
Currently macfb_common_realize() defines the framebuffer RAM memory region as
being non-migrateable but then immediately registers it for migration. Replace
memory_region_init_ram_nomigrate() with memory_region_init_ram() which is clearer
and does exactly the same thing.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-08 13:31:03 +02:00
Mark Cave-Ayland
14d0ddfce7 macfb: fix overflow of color_palette array
The palette_current index counter has a maximum size of 256 * 3 to cover a full
color palette of 256 RGB entries. Linux assumes that the palette_current index
wraps back around to zero after writing 256 RGB entries so ensure that
palette_current is reset at this point to prevent data corruption within
MacfbState.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-08 13:31:03 +02:00
Mark Cave-Ayland
906c2323f1 macfb: fix invalid object reference in macfb_common_realize()
During realize memory_region_init_ram_nomigrate() is used to initialise the RAM
memory region used for the framebuffer but the owner object reference is
incorrect since MacFbState is a typedef and not a QOM type.

Change the memory region owner to be the corresponding DeviceState to fix the
issue and prevent random crashes during macfb_common_realize().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 8ac919a065 ("hw/m68k: add Nubus macfb video card")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-08 13:31:02 +02:00
Mark Cave-Ayland
c047862acd macfb: update macfb.c to use the Error API best practices
As per the current Error API best practices, change macfb_commom_realize() to return
a boolean indicating success to reduce errp boiler-plate handling code. Note that
memory_region_init_ram_nomigrate() is also updated to use &error_abort to indicate
a non-recoverable error, matching the behaviour recommended after similar
discussions on memory API failures for the recent nubus changes.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-08 13:31:02 +02:00
Mark Cave-Ayland
7437b13eac macfb: handle errors that occur during realize
Make sure any errors that occur within the macfb realize chain are detected
and handled correctly to prevent crashes and to ensure that error messages are
reported back to the user.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-08 13:31:02 +02:00
Richard Henderson
14f12119aa mirror: Handle errors after READY cancel
v2: add small fix by Stefano, Hanna's series fixed
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmFfEVMACgkQVh8kwfGf
 eftAVA//WLtOaiVYPSjEl5EK80kry39VknZkQyeYUzyV7JNr/FRMlbJaIF2sOjH5
 KPRpfwBiuijOc8R0s34HY0BpyweRd1rbypHblZkO7EO4XwHx1FLF5kNHF6yV7wPL
 c9W564sZpc6Z96wSMgC4Is9QHJ6JbO4TJNJsG8v/PHEqGQV/yCYkgBox4loJckww
 uSAZ7l63IWA8uPSq/rOu34bREKN9s0kHkvFq0JNWk2HtOBLDiRDUYmbSfdjfT4jz
 np7ojKiffcAJED9JA28Zo2Y+MSId+FyoO4lbt+deMNzIHboy2oVlHouoHHprr61x
 dIO7Qt1IoMk5IBIfkPRYkReMwxxSVKuIJcWm8Qqtkcg2X0g5ayNUmHwpBMd50h2z
 XPjrr0YdOixhxMHoBnqlkPlWU0Y/B+YJIQ+mjqp+vRNkk94NoXhsXnCod1ajkgWO
 zjc/dztew7HvNStJaMM0rnEjanLhzFZKtlMO4WwZHQp2yZG2AINkPStswo2f3AmL
 FI+2By/UhFKm3BEemf0wYWDPWrPHU+BOiu16KjSKeS0GA9t7GXBUDRxNYPhUheXJ
 eJKIpNsGbseNxKrAbLyRhAB75Fa/ReZqqybmEcLyal/ball3R/cNF3gaMHeX0o1n
 HTGIAF5JOAXNGApS5TilkXPZ7jHFOVPh/Fi6/16/08tcgxjVfro=
 =TVTu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vsementsov/tags/pull-jobs-2021-10-07-v2' into staging

mirror: Handle errors after READY cancel
v2: add small fix by Stefano, Hanna's series fixed

# gpg: Signature made Thu 07 Oct 2021 08:25:07 AM PDT
# gpg:                using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E  86A1 561F 24C1 F19F 79FB

* remotes/vsementsov/tags/pull-jobs-2021-10-07-v2:
  iotests: Add mirror-ready-cancel-error test
  mirror: Do not clear .cancelled
  mirror: Stop active mirroring after force-cancel
  mirror: Check job_is_cancelled() earlier
  mirror: Use job_is_cancelled()
  job: Add job_cancel_requested()
  job: Do not soft-cancel after a job is done
  jobs: Give Job.force_cancel more meaning
  job: @force parameter for job_cancel_sync()
  job: Force-cancel jobs in a failed transaction
  mirror: Drop s->synced
  mirror: Keep s->synced on error
  job: Context changes in job_completed_txn_abort()
  block/aio_task: assert `max_busy_tasks` is greater than 0
  block/backup: avoid integer overflow of `max-workers`

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-07 10:26:35 -07:00
Richard Henderson
3c01933983 Third RISC-V PR for QEMU 6.2
- Add Zb[abcs] instruction support
  - Remove RVB support
  - Bug fix of setting mstatus_hs.[SD|FS] bits
  - Mark some UART devices as 'input'
  - QOMify PolarFire MMUART
  - Fixes for sifive PDMA
  - Mark shakti_c as not user creatable
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmFelu0ACgkQIeENKd+X
 cFQ1vQf/a0QNMv/q9shDX8IzX6zPKMHpdhgqqfqsdL3bPqjhXBbpZuSQOlq2UsPv
 6LwvEqvMq5Il8UHrFGaY87d08NWY+QMXNJml2oe8k5tU80DIR3Iv91Kz6RnGLsR9
 iaEFbYZNWax4lIFnW5h543EU4szOuNO+U+egJjvjQARIodbRjsfBMQJzlUHQ7Oqr
 2n44165IDUyah3QDXk25SSH1RXoeD1OjrbJ/NLFIY6LE7x9NJZm5GDQr3fIi3E5j
 CBBG116huejif9NmaI+xefzi696iZWrbJvhCD9nIlbYnwq4ENgjf4GPb7TEzVPWc
 t3yRrWVlUB4t9mD54ur+wPrCw9GXtA==
 =vnL1
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/alistair23/tags/pull-riscv-to-apply-20211007' into staging

Third RISC-V PR for QEMU 6.2

 - Add Zb[abcs] instruction support
 - Remove RVB support
 - Bug fix of setting mstatus_hs.[SD|FS] bits
 - Mark some UART devices as 'input'
 - QOMify PolarFire MMUART
 - Fixes for sifive PDMA
 - Mark shakti_c as not user creatable

# gpg: Signature made Wed 06 Oct 2021 11:42:53 PM PDT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]

* remotes/alistair23/tags/pull-riscv-to-apply-20211007: (26 commits)
  hw/riscv: shakti_c: Mark as not user creatable
  hw/dma: sifive_pdma: Don't run DMA when channel is disclaimed
  hw/dma: sifive_pdma: Fix Control.claim bit detection
  hw/char/mchp_pfsoc_mmuart: QOM'ify PolarFire MMUART
  hw/char/mchp_pfsoc_mmuart: Use a MemoryRegion container
  hw/char/mchp_pfsoc_mmuart: Simplify MCHP_PFSOC_MMUART_REG definition
  hw/char: sifive_uart: Register device in 'input' category
  hw/char: shakti_uart: Register device in 'input' category
  hw/char: ibex_uart: Register device in 'input' category
  target/riscv: Set mstatus_hs.[SD|FS] bits if Clean and V=1 in mark_fs_dirty()
  disas/riscv: Add Zb[abcs] instructions
  target/riscv: Remove RVB (replaced by Zb[abcs])
  target/riscv: Add zext.h instructions to Zbb, removing pack/packu/packh
  target/riscv: Add rev8 instruction, removing grev/grevi
  target/riscv: Add a REQUIRE_32BIT macro
  target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci
  target/riscv: Reassign instructions to the Zbb-extension
  target/riscv: Add instructions of the Zbc-extension
  target/riscv: Reassign instructions to the Zbs-extension
  target/riscv: Remove shift-one instructions (proposed Zbo in pre-0.93 draft-B)
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-07 07:18:39 -07:00
Hanna Reitz
2451f72527 iotests: Add mirror-ready-cancel-error test
Test what happens when there is an I/O error after a mirror job in the
READY phase has been cancelled.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-14-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:50 +02:00
Hanna Reitz
a640fa0e38 mirror: Do not clear .cancelled
Clearing .cancelled before leaving the main loop when the job has been
soft-cancelled is no longer necessary since job_is_cancelled() only
returns true for jobs that have been force-cancelled.

Therefore, this only makes a differences in places that call
job_cancel_requested().  In block/mirror.c, this is done only before
.cancelled was cleared.

In job.c, there are two callers:
- job_completed_txn_abort() asserts that .cancelled is true, so keeping
  it true will not affect this place.

- job_complete() refuses to let a job complete that has .cancelled set.
  It is correct to refuse to let the user invoke job-complete on mirror
  jobs that have already been soft-cancelled.

With this change, there are no places that reset .cancelled to false and
so we can be sure that .force_cancel can only be true if .cancelled is
true as well.  Assert this in job_is_cancelled().

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-13-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:50 +02:00
Hanna Reitz
9b230ef93e mirror: Stop active mirroring after force-cancel
Once the mirror job is force-cancelled (job_is_cancelled() is true), we
should not generate new I/O requests.  This applies to active mirroring,
too, so stop it once the job is cancelled.

(We must still forward all I/O requests to the source, though, of
course, but those are not really I/O requests generated by the job, so
this is fine.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-12-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:50 +02:00
Hanna Reitz
4feeec7e23 mirror: Check job_is_cancelled() earlier
We must check whether the job is force-cancelled early in our main loop,
most importantly before any `continue` statement.  For example, we used
to have `continue`s before our current checking location that are
triggered by `mirror_flush()` failing.  So, if `mirror_flush()` kept
failing, force-cancelling the job would not terminate it.

Jobs can be cancelled while they yield, and once they are
(force-cancelled), they should not generate new I/O requests.
Therefore, we should put the check after the last yield before
mirror_iteration() is invoked.

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/462
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-11-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:50 +02:00
Hanna Reitz
20ad4d204a mirror: Use job_is_cancelled()
mirror_drained_poll() returns true whenever the job is cancelled,
because "we [can] be sure that it won't issue more requests".  However,
this is only true for force-cancelled jobs, so use job_is_cancelled().

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-10-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:50 +02:00
Hanna Reitz
08b83bff2a job: Add job_cancel_requested()
Most callers of job_is_cancelled() actually want to know whether the job
is on its way to immediate termination.  For example, we refuse to pause
jobs that are cancelled; but this only makes sense for jobs that are
really actually cancelled.

A mirror job that is cancelled during READY with force=false should
absolutely be allowed to pause.  This "cancellation" (which is actually
a kind of completion) may take an indefinite amount of time, and so
should behave like any job during normal operation.  For example, with
on-target-error=stop, the job should stop on write errors.  (In
contrast, force-cancelled jobs should not get write errors, as they
should just terminate and not do further I/O.)

Therefore, redefine job_is_cancelled() to only return true for jobs that
are force-cancelled (which as of HEAD^ means any job that interprets the
cancellation request as a request for immediate termination), and add
job_cancel_requested() as the general variant, which returns true for
any jobs which have been requested to be cancelled, whether it be
immediately or after an arbitrarily long completion phase.

Finally, here is a justification for how different job_is_cancelled()
invocations are treated by this patch:

- block/mirror.c (mirror_run()):
  - The first invocation is a while loop that should loop until the job
    has been cancelled or scheduled for completion.  What kind of cancel
    does not matter, only the fact that the job is supposed to end.

  - The second invocation wants to know whether the job has been
    soft-cancelled.  Calling job_cancel_requested() is a bit too broad,
    but if the job were force-cancelled, we should leave the main loop
    as soon as possible anyway, so this should not matter here.

  - The last two invocations already check force_cancel, so they should
    continue to use job_is_cancelled().

- block/backup.c, block/commit.c, block/stream.c, anything in tests/:
  These jobs know only force-cancel, so there is no difference between
  job_is_cancelled() and job_cancel_requested().  We can continue using
  job_is_cancelled().

- job.c:
  - job_pause_point(), job_yield(), job_sleep_ns(): Only force-cancelled
    jobs should be prevented from being paused.  Continue using job_is_cancelled().

  - job_update_rc(), job_finalize_single(), job_finish_sync(): These
    functions are all called after the job has left its main loop.  The
    mirror job (the only job that can be soft-cancelled) will clear
    .cancelled before leaving the main loop if it has been
    soft-cancelled.  Therefore, these functions will observe .cancelled
    to be true only if the job has been force-cancelled.  We can
    continue to use job_is_cancelled().
    (Furthermore, conceptually, a soft-cancelled mirror job should not
    report to have been cancelled.  It should report completion (see
    also the block-job-cancel QAPI documentation).  Therefore, it makes
    sense for these functions not to distinguish between a
    soft-cancelled mirror job and a job that has completed as normal.)

  - job_completed_txn_abort(): All jobs other than @job have been
    force-cancelled.  job_is_cancelled() must be true for them.
    Regarding @job itself: job_completed_txn_abort() is mostly called
    when the job's return value is not 0.  A soft-cancelled mirror has a
    return value of 0, and so will not end up here then.
    However, job_cancel() invokes job_completed_txn_abort() if the job
    has been deferred to the main loop, which is mostly the case for
    completed jobs (which skip the assertion), but not for sure.
    To be safe, use job_cancel_requested() in this assertion.

  - job_complete(): This is function eventually invoked by the user
    (through qmp_block_job_complete() or qmp_job_complete(), or
    job_complete_sync(), which comes from qemu-img).  The intention here
    is to prevent a user from invoking job-complete after the job has
    been cancelled.  This should also apply to soft cancelling: After a
    mirror job has been soft-cancelled, the user should not be able to
    decide otherwise and have it complete as normal (i.e. pivoting to
    the target).

  - job_cancel(): Both functions are equivalent (see comment there), but
    we want to use job_is_cancelled(), because this shows that we call
    job_completed_txn_abort() only for force-cancelled jobs.  (As
    explained for job_update_rc(), soft-cancelled jobs should be treated
    as if they have completed as normal.)

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/462
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-9-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:40 +02:00
Hanna Reitz
401dd096ef job: Do not soft-cancel after a job is done
The only job that supports a soft cancel mode is the mirror job, and in
such a case it resets its .cancelled field before it leaves its .run()
function, so it does not really count as cancelled.

However, it is possible to cancel the job after .run() returns and
before job_exit() (which is run in the main loop) is executed.  Then,
.cancelled would still be true and the job would count as cancelled.
This does not seem to be in the interest of the mirror job, so adjust
job_cancel_async() to not set .cancelled in such a case, and
job_cancel() to not invoke job_completed_txn_abort().

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-8-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:34 +02:00
Hanna Reitz
73895f3838 jobs: Give Job.force_cancel more meaning
We largely have two cancel modes for jobs:

First, there is actual cancelling.  The job is terminated as soon as
possible, without trying to reach a consistent result.

Second, we have mirror in the READY state.  Technically, the job is not
really cancelled, but it just is a different completion mode.  The job
can still run for an indefinite amount of time while it tries to reach a
consistent result.

We want to be able to clearly distinguish which cancel mode a job is in
(when it has been cancelled).  We can use Job.force_cancel for this, but
right now it only reflects cancel requests from the user with
force=true, but clearly, jobs that do not even distinguish between
force=false and force=true are effectively always force-cancelled.

So this patch has Job.force_cancel signify whether the job will
terminate as soon as possible (force_cancel=true) or whether it will
effectively remain running despite being "cancelled"
(force_cancel=false).

To this end, we let jobs that provide JobDriver.cancel() tell the
generic job code whether they will terminate as soon as possible or not,
and for jobs that do not provide that method we assume they will.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211006151940.214590-7-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:34 +02:00
Hanna Reitz
4cfb3f0562 job: @force parameter for job_cancel_sync()
Callers should be able to specify whether they want job_cancel_sync() to
force-cancel the job or not.

In fact, almost all invocations do not care about consistency of the
result and just want the job to terminate as soon as possible, so they
should pass force=true.  The replication block driver is the exception,
specifically the active commit job it runs.

As for job_cancel_sync_all(), all callers want it to force-cancel all
jobs, because that is the point of it: To cancel all remaining jobs as
quickly as possible (generally on process termination).  So make it
invoke job_cancel_sync() with force=true.

This changes some iotest outputs, because quitting qemu while a mirror
job is active will now lead to it being cancelled instead of completed,
which is what we want.  (Cancelling a READY mirror job with force=false
may take an indefinite amount of time, which we do not want when
quitting.  If users want consistent results, they must have all jobs be
done before they quit qemu.)

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/462
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-6-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:42:09 +02:00
Hanna Reitz
1d4a43e946 job: Force-cancel jobs in a failed transaction
When a transaction is aborted, no result matters, and so all jobs within
should be force-cancelled.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-5-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:40:48 +02:00
Hanna Reitz
4471622428 mirror: Drop s->synced
As of HEAD^, there is no meaning to s->synced other than whether the job
is READY or not.  job_is_ready() gives us that information, too.

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211006151940.214590-4-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:40:48 +02:00
Hanna Reitz
a3810da5cf mirror: Keep s->synced on error
An error does not take us out of the READY phase, which is what
s->synced signifies.  It does of course mean that source and target are
no longer in sync, but that is what s->actively_sync is for -- s->synced
never meant that source and target are in sync, only that they were at
some point (and at that point we transitioned into the READY phase).

The tangible problem is that we transition to READY once we are in sync
and s->synced is false.  By resetting s->synced here, we will transition
from READY to READY once the error is resolved (if the job keeps
running), and that transition is not allowed.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211006151940.214590-3-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:40:48 +02:00
Hanna Reitz
d431131439 job: Context changes in job_completed_txn_abort()
Finalizing the job may cause its AioContext to change.  This is noted by
job_exit(), which points at job_txn_apply() to take this fact into
account.

However, job_completed() does not necessarily invoke job_txn_apply()
(through job_completed_txn_success()), but potentially also
job_completed_txn_abort().  The latter stores the context in a local
variable, and so always acquires the same context at its end that it has
released in the beginning -- which may be a different context from the
one that job_exit() releases at its end.  If it is different, qemu
aborts ("qemu_mutex_unlock_impl: Operation not permitted").

Drop the local @outer_ctx variable from job_completed_txn_abort(), and
instead re-acquire the actual job's context at the end of the function,
so job_exit() will release the same.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-2-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-10-07 10:40:48 +02:00
Alistair Francis
9ae6ecd848 hw/riscv: shakti_c: Mark as not user creatable
Mark the shakti_c machine as not user creatable.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/639
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <c617a04d4e3dd041a3427b47a1b1d5ab475a2edd.1632871759.git.alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Bin Meng
47b5fbf5a3 hw/dma: sifive_pdma: Don't run DMA when channel is disclaimed
If Control.run bit is set while not preserving the Control.claim
bit, the DMA transfer shall not be started.

The following result is PDMA tested in U-Boot on Unleashed board:

=> mw.l 0x3000000 0x0                      <= Disclaim channel 0
=> mw.l 0x3000000 0x1                      <= Claim channel 0
=> mw.l 0x3000004 0x55000000               <= wsize = rsize = 5 (2^5 = 32 bytes)
=> mw.q 0x3000008 0x2                      <= NextBytes = 2
=> mw.q 0x3000010 0x84000000               <= NextDestination = 0x84000000
=> mw.q 0x3000018 0x84001000               <= NextSource = 0x84001000
=> mw.l 0x84000000 0x87654321              <= Fill test data to dst
=> mw.l 0x84001000 0x12345678              <= Fill test data to src
=> md.l 0x84000000 1; md.l 0x84001000 1    <= Dump src/dst memory contents
84000000: 87654321                               !Ce.
84001000: 12345678                               xV4.
=> md.l 0x3000000 8                        <= Dump PDMA status
03000000: 00000001 55000000 00000002 00000000    .......U........
03000010: 84000000 00000000 84001000 00000000    ................
=> mw.l 0x3000000 0x2                      <= Set channel 0 run bit only
=> md.l 0x3000000 8                        <= Dump PDMA status
03000000: 00000000 55000000 00000002 00000000    .......U........
03000010: 84000000 00000000 84001000 00000000    ................
=> md.l 0x84000000 1; md.l 0x84001000 1    <= Dump src/dst memory contents
84000000: 87654321                               !Ce.
84001000: 12345678                               xV4.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210927072124.1564129-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Bin Meng
b7af62ae2c hw/dma: sifive_pdma: Fix Control.claim bit detection
At present the codes detect whether the DMA channel is claimed by:

  claimed = !!s->chan[ch].control & CONTROL_CLAIM;

As ! has higher precedence over & (bitwise and), this is essentially

  claimed = (!!s->chan[ch].control) & CONTROL_CLAIM;

which is wrong, as any non-zero bit set in the control register will
produce a result of a claimed channel.

Fixes: de7c7988d2 ("hw/dma: sifive_pdma: reset Next* registers when Control.claim is set")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210927072124.1564129-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philippe Mathieu-Daudé
31ca70b5ff hw/char/mchp_pfsoc_mmuart: QOM'ify PolarFire MMUART
- Embed SerialMM in MchpPfSoCMMUartState and QOM-initialize it
- Alias SERIAL_MM 'chardev' property on MCHP_PFSOC_UART
- Forward SerialMM sysbus IRQ in mchp_pfsoc_mmuart_realize()
- Add DeviceReset() method
- Add vmstate structure for migration
- Register device in 'input' category
- Keep mchp_pfsoc_mmuart_create() behavior

Note, serial_mm_init() calls qdev_set_legacy_instance_id().
This call is only needed for backwards-compatibility of incoming
migration data with old versions of QEMU which implemented migration
of devices with hand-rolled code. Since this device didn't previously
handle migration at all, then it doesn't need to set the legacy
instance ID.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210925133407.1259392-4-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philippe Mathieu-Daudé
24ce762df7 hw/char/mchp_pfsoc_mmuart: Use a MemoryRegion container
Our device have 2 different I/O regions:
- a 16550 UART mapped for 32-bit accesses
- 13 extra registers

Instead of mapping each region on the main bus, introduce
a container, map the 2 devices regions on the container,
and map the container on the main bus.

Before:

  (qemu) info mtree
    ...
    0000000020100000-000000002010001f (prio 0, i/o): serial
    0000000020100020-000000002010101f (prio 0, i/o): mchp.pfsoc.mmuart
    0000000020102000-000000002010201f (prio 0, i/o): serial
    0000000020102020-000000002010301f (prio 0, i/o): mchp.pfsoc.mmuart
    0000000020104000-000000002010401f (prio 0, i/o): serial
    0000000020104020-000000002010501f (prio 0, i/o): mchp.pfsoc.mmuart
    0000000020106000-000000002010601f (prio 0, i/o): serial
    0000000020106020-000000002010701f (prio 0, i/o): mchp.pfsoc.mmuart

After:

  (qemu) info mtree
    ...
    0000000020100000-0000000020100fff (prio 0, i/o): mchp.pfsoc.mmuart
      0000000020100000-000000002010001f (prio 0, i/o): serial
      0000000020100020-0000000020100fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
    0000000020102000-0000000020102fff (prio 0, i/o): mchp.pfsoc.mmuart
      0000000020102000-000000002010201f (prio 0, i/o): serial
      0000000020102020-0000000020102fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
    0000000020104000-0000000020104fff (prio 0, i/o): mchp.pfsoc.mmuart
      0000000020104000-000000002010401f (prio 0, i/o): serial
      0000000020104020-0000000020104fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
    0000000020106000-0000000020106fff (prio 0, i/o): mchp.pfsoc.mmuart
      0000000020106000-000000002010601f (prio 0, i/o): serial
      0000000020106020-0000000020106fff (prio 0, i/o): mchp.pfsoc.mmuart.regs

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-id: 20210925133407.1259392-3-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philippe Mathieu-Daudé
284a66a8f6 hw/char/mchp_pfsoc_mmuart: Simplify MCHP_PFSOC_MMUART_REG definition
The current MCHP_PFSOC_MMUART_REG_SIZE definition represent the
size occupied by all the registers. However all registers are
32-bit wide, and the MemoryRegionOps handlers are restricted to
32-bit:

  static const MemoryRegionOps mchp_pfsoc_mmuart_ops = {
      .read = mchp_pfsoc_mmuart_read,
      .write = mchp_pfsoc_mmuart_write,
      .impl = {
          .min_access_size = 4,
          .max_access_size = 4,
      },

Avoid being triskaidekaphobic, simplify by using the number of
registers.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210925133407.1259392-2-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Bin Meng
6a03349007 hw/char: sifive_uart: Register device in 'input' category
The category of sifive_uart device is not set. Put it into the
'input' category.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Bin Meng
5515ff162e hw/char: shakti_uart: Register device in 'input' category
The category of shakti_uart device is not set. Put it into the
'input' category.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Bin Meng
34229c46a7 hw/char: ibex_uart: Register device in 'input' category
The category of ibex_uart device is not set. Put it into the
'input' category.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Frank Chang
a88f040239 target/riscv: Set mstatus_hs.[SD|FS] bits if Clean and V=1 in mark_fs_dirty()
When V=1, both vsstauts.FS and HS-level sstatus.FS are in effect.
Modifying the floating-point state when V=1 causes both fields to
be set to 3 (Dirty).

However, it's possible that HS-level sstatus.FS is Clean and VS-level
vsstatus.FS is Dirty at the time mark_fs_dirty() is called when V=1.
We can't early return for this case because we still need to set
sstatus.FS to Dirty according to spec.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210921020234.123448-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
02c1b569a1 disas/riscv: Add Zb[abcs] instructions
With the addition of Zb[abcs], we also need to add disassembler
support for these new instructions.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-17-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
9916ea3c97 target/riscv: Remove RVB (replaced by Zb[abcs])
With everything classified as Zb[abcs] and pre-0.93 draft-B
instructions that are not part of Zb[abcs] removed, we can remove the
remaining support code for RVB.

Note that RVB has been retired for good and misa.B will neither mean
'some' or 'all of' Zb*:
  https://lists.riscv.org/g/tech-bitmanip/message/532

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-16-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
06dfa8a5c5 target/riscv: Add zext.h instructions to Zbb, removing pack/packu/packh
The 1.0.0 version of Zbb does not contain pack/packu/packh. However, a
zext.h instruction is provided (built on pack/packh from pre-0.93
draft-B) is available.

This commit adds zext.h and removes the pack* instructions.

Note that the encodings for zext.h are different between RV32 and
RV64, which is handled through REQUIRE_32BIT.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-15-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
a1095bdcb0 target/riscv: Add rev8 instruction, removing grev/grevi
The 1.0.0 version of Zbb does not contain grev/grevi.  Instead, a
rev8 instruction (equivalent to the rev8 pseudo-instruction built on
grevi from pre-0.93 draft-B) is available.

This commit adds the new rev8 instruction and removes grev/grevi.

Note that there is no W-form of this instruction (both a
sign-extending and zero-extending 32-bit version can easily be
synthesized by following rev8 with either a srai or srli instruction
on RV64) and that the opcode encodings for rev8 in RV32 and RV64 are
different.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-14-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
7e68e6c79b target/riscv: Add a REQUIRE_32BIT macro
With the changes to Zb[abcs], there's some encodings that are
different in RV64 and RV32 (e.g., for rev8 and zext.h). For these,
we'll need a helper macro allowing us to select on RV32, as well.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-13-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
d7a4fcb034 target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci
The 1.0.0 version of Zbb does not contain gorc/gorci.  Instead, a
orc.b instruction (equivalent to the orc.b pseudo-instruction built on
gorci from pre-0.93 draft-B) is available, mainly targeting
string-processing workloads.

This commit adds the new orc.b instruction and removed gorc/gorci.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-12-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
16c38f36f5 target/riscv: Reassign instructions to the Zbb-extension
This reassigns the instructions that are part of Zbb into it, with the
notable exceptions of the instructions (rev8, zext.w and orc.b) that
changed due to gorci, grevi and pack not being part of Zb[abcs].

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-11-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:21 +10:00
Philipp Tomsich
fd4b81a304 target/riscv: Add instructions of the Zbc-extension
The following instructions are part of Zbc:
 - clmul
 - clmulh
 - clmulr

Note that these instructions were already defined in the pre-0.93 and
the 0.93 draft-B proposals, but had not been omitted in the earlier
addition of draft-B to QEmu.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-10-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:16 +10:00
Philipp Tomsich
f36a4a89aa target/riscv: Reassign instructions to the Zbs-extension
The following instructions are part of Zbs:
 - b{set,clr,ext,inv}
 - b{set,clr,ext,inv}i

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-9-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:13 +10:00
Philipp Tomsich
628d8c88c1 target/riscv: Remove shift-one instructions (proposed Zbo in pre-0.93 draft-B)
The Zb[abcs] ratification package does not include the proposed
shift-one instructions. There currently is no clear plan to whether
these (or variants of them) will be ratified as Zbo (or a different
extension) or what the timeframe for such a decision could be.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-8-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:09 +10:00
Philipp Tomsich
dd98a74034 target/riscv: Remove the W-form instructions from Zbs
Zbs 1.0.0 (just as the 0.93 draft-B before) does not provide for W-form
instructions for Zbs (single-bit instructions).  Remove them.

Note that these instructions had already been removed for the 0.93
version of the draft-B extention and have not been present in the
binutils patches circulating in January 2021.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-7-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:05 +10:00
Philipp Tomsich
bb4dc158e0 target/riscv: Reassign instructions to the Zba-extension
The following instructions are part of Zba:
 - add.uw (RV64 only)
 - sh[123]add (RV32 and RV64)
 - sh[123]add.uw (RV64-only)
 - slli.uw (RV64-only)

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-6-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:01 +10:00
Philipp Tomsich
878dd0e9ac target/riscv: Add x-zba, x-zbb, x-zbc and x-zbs properties
The bitmanipulation ISA extensions will be ratified as individual
small extension packages instead of a large B-extension.  The first
new instructions through the door (these have completed public review)
are Zb[abcs].

This adds new 'x-zba', 'x-zbb', 'x-zbc' and 'x-zbs' properties for
these in target/riscv/cpu.[ch].

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-5-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:32:55 +10:00
Philipp Tomsich
45d1749c1c target/riscv: clwz must ignore high bits (use shift-left & changed logic)
Assume clzw being executed on a register that is not sign-extended, such
as for the following sequence that uses (1ULL << 63) | 392 as the operand
to clzw:
	bseti	a2, zero, 63
	addi	a2, a2, 392
	clzw    a3, a2
The correct result of clzw would be 23, but the current implementation
returns -32 (as it performs a 64bit clz, which results in 0 leading zero
bits, and then subtracts 32).

Fix this by changing the implementation to:
 1. shift the original register up by 32
 2. performs a target-length (64bit) clz
 3. return 32 if no bits are set

Marking this instruction as 'w-form' (i.e., setting ctx->w) would not
correctly model the behaviour, as the instruction should not perform
a zero-extensions on the input (after all, it is not a .uw instruction)
and the result is always in the range 0..32 (so neither a sign-extension
nor a zero-extension on the result will ever be needed).  Consequently,
we do not set ctx->w and mark the instruction as EXT_NONE.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
Message-id: 20210911140016.834071-4-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:32:47 +10:00
Philipp Tomsich
e47fb6c1e9 target/riscv: fix clzw implementation to operate on arg1
The refactored gen_clzw() uses ret as its argument, instead of arg1.
Fix it.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210911140016.834071-3-philipp.tomsich@vrull.eu
Fixes: 6090391505 ("target/riscv: Add DisasExtend to gen_unary")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:32:39 +10:00
Philipp Tomsich
c5b4ee5bb7 target/riscv: Introduce temporary in gen_add_uw()
Following the recent changes in translate.c, gen_add_uw() causes
failures on CF3 and SPEC2017 due to the reuse of arg1.  Fix these
regressions by introducing a temporary.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210911140016.834071-2-philipp.tomsich@vrull.eu
Fixes: 191d1dafae ("target/riscv: Add DisasExtend to gen_arith*")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:32:21 +10:00
Richard Henderson
ca61fa4b80 Change from Philippe - Use tcg_constant_*
Change from Philippe - Remove unused TCG temp
 Change from Taylor - Probe the stores in a packet at start of commit
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJhXcRNAAoJEHsCRPsS3kQitBkH/0en3UJ5FYZVMbdhZW8UEsY7
 Pg9I4zcLCwGWBnUSkhgdJbzjQPRDAs5rGl+fVswLrjjvtHE/528Yn4B+31s+GDwK
 Ofz5RlwTM1rVfh/NW2PMhY97+/VUakH6lS6bEmcXyTmtwWx9OciEvxn8KblVENNG
 a3F82cByh+G91Gw6n1fXER/Ksebtq22Cu/O3f8PAZU5UqqEbGoxStTptstG6BEDR
 vPS2PBROn4S9W4YPjUUXds+RoW53TV1c/cdkAvWwa8bC2q/LJS3JqaoG9eaSQgkd
 S3XObETATgaXdByXmqUYaioWsgRevRtEct44RZxG6e8qmyFuvEcLqTlDi8qqYl0=
 =bmyK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20211006' into staging

Change from Philippe - Use tcg_constant_*
Change from Philippe - Remove unused TCG temp
Change from Taylor - Probe the stores in a packet at start of commit

# gpg: Signature made Wed 06 Oct 2021 08:44:13 AM PDT
# gpg:                using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5  9AB4 7B02 44FB 12DE 4422

* remotes/quic/tags/pull-hex-20211006:
  target/hexagon: Use tcg_constant_*
  target/hexagon: Remove unused TCG temporary from predicated loads
  Hexagon (target/hexagon) probe the stores in a packet at start of commit

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-06 12:11:14 -07:00
Richard Henderson
6723ff639c More fixes for fedora-i386-cross
Add dup_const_tl
 Expand MemOp MO_SIZE
 Move MemOpIdx out of tcg.h
 Vector support for tcg/s390x
 -----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmFdvPUdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8gcwf/T+J5dCgGisLnjOlh
 mG16tZczILfmpw76Yne0zwJ8T2WFohkyOegBnfRZHzUM/0JZlMbvNMUKSJd4WKhB
 fpzHKEeTVo7OlW5i6eo1HqQYcbEKzBMEBLEoDWeyRt3k3hpTcjNuD6tC3CaZoCvs
 gf9UcYgsp3htRPsoOhmarjv5Wded7N1BDQa0W7amlT2rLPO4L2UILfDXiWmapkcp
 0kgiKaI1Criua3BNA1+oGPQQQPVSi1MQmiwX/IW/6fExpC65xLBMI3DIyr1ejFPX
 rrIyx49dQuUHCrPi9jcZ9eT3z8h1PhmAuREv1/VaDl2BROnXUGCanWZoLEd+YWFH
 R6mXnQ==
 =cs7J
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20211006' into staging

More fixes for fedora-i386-cross
Add dup_const_tl
Expand MemOp MO_SIZE
Move MemOpIdx out of tcg.h
Vector support for tcg/s390x

# gpg: Signature made Wed 06 Oct 2021 08:12:53 AM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* remotes/rth/tags/pull-tcg-20211006: (28 commits)
  tcg/s390x: Implement TCG_TARGET_HAS_cmpsel_vec
  tcg/s390x: Implement TCG_TARGET_HAS_bitsel_vec
  tcg/s390x: Implement TCG_TARGET_HAS_sat_vec
  tcg/s390x: Implement TCG_TARGET_HAS_minmax_vec
  tcg/s390x: Implement vector shift operations
  tcg/s390x: Implement TCG_TARGET_HAS_mul_vec
  tcg/s390x: Implement andc, orc, abs, neg, not vector operations
  tcg/s390x: Implement minimal vector operations
  tcg/s390x: Implement tcg_out_dup*_vec
  tcg/s390x: Implement tcg_out_mov for vector types
  tcg/s390x: Implement tcg_out_ld/st for vector types
  tcg/s390x: Add host vector framework
  tcg/s390x: Merge TCG_AREG0 and TCG_REG_CALL_STACK into TCGReg
  tcg/s390x: Change FACILITY representation
  tcg/s390x: Rename from tcg/s390
  tcg: Expand usadd/ussub with umin/umax
  hw/core/cpu: Re-sort the non-pointers to the end of CPUClass
  trace: Split guest_mem_before
  plugins: Reorg arguments to qemu_plugin_vcpu_mem_cb
  accel/tcg: Pass MemOpIdx to atomic_trace_*_post
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-06 08:50:23 -07:00
Philippe Mathieu-Daudé
23803bbe52 target/hexagon: Use tcg_constant_*
Replace uses of tcg_const_* with the allocate and free close together.

Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003004750.3608983-3-f4bug@amsat.org>
2021-10-06 10:29:56 -05:00
Philippe Mathieu-Daudé
f844f745a8 target/hexagon: Remove unused TCG temporary from predicated loads
The gen_pred_cancel() function, introduced in commit a646e99cb9
(Hexagon macros) doesn't use the 'one' TCG temporary; remove it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003004750.3608983-2-f4bug@amsat.org>
2021-10-06 10:29:45 -05:00