'mode' will never be RISCV_IOMMU_CAP_SV32. We are erroring out in the
'switch' right before it if 'mode' isn't 0, 8, 9 or 10.
'mode' should be check with RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32.
Reported by Coverity via a "DEADCODE" ticket.
Resolves: Coverity CID 1564781
Fixes: 0c54acb824 ("hw/riscv: add RISC-V IOMMU base emulation")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241104123839.533442-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Coverity reports an unsigned overflow when doing:
for (; depth-- > 0; ) {
When depth = 0 inside riscv_iommu_ctx_fetch().
Building it with a recent GCC the code doesn't actually break with depth
= 0, i.e. the comparison "0-- > 0" will exit the loop instead of
proceeding, but 'depth' will retain the overflow value afterwards.
This behavior can be compiler dependent, so change 'depth' to int to
remove this potential ambiguity.
Resolves: Coverity CID 1564783
Fixes: 0c54acb824 ("hw/riscv: add RISC-V IOMMU base emulation")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241104123839.533442-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Casting a "uint32_t *" to a "uint8_t *" to get to the lowest 8-bit
part of the value does not work on big endian hosts. We've got to
take the proper detour through an 8-bit variable.
Fixes: 53c1557b23 ("hw/char: sifive_uart: Print uart characters async")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241104163504.305955-1-thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduced in 0c54acb824, "hw/riscv: add RISC-V IOMMU base emulation".
../hw/riscv/riscv-iommu.c:187:17: error: redefinition of '_pext_u64'
187 | static uint64_t _pext_u64(uint64_t val, uint64_t ext)
| ^
D:/a/_temp/msys64/clang64/lib/clang/18/include/bmi2intrin.h:217:1: note: previous definition is here
217 | _pext_u64(unsigned long long __X, unsigned long long __Y)
| ^
After a conversation on the mailing list, it was decided to rename and
add a comment for this function.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241104222225.1523751-1-pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The naming of the TypeInfo array is inspired by hcd-ohci-sysbus.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-25-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-24-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-22-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-21-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-19-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-18-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-17-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Instead of defining redundant constants and using magic numbers reuse the
existing MII constants.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241103133412.73536-16-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-15-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Prefer a macro rather than a string literal when instantiaging device models.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-14-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Populate this read-only register with some arbitrary values which avoids
U-Boot's get_clocks() to hang().
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-11-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When compiling a decompiled device tree blob created with dumpdtb, dtc complains
with:
/soc@e0000000/i2c@3000: incorrect #address-cells for I2C bus
/soc@e0000000/i2c@3000: incorrect #size-cells for I2C bus
Fix this by adding the missing device tree properties.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, we have no way to expose the arch-specific default cache
model because the cache model is sometimes related to the CPU model
(e.g., i386).
Since the user might configure "default" level, any comparison with
"default" is meaningless before the machine knows the specific level
that "default" refers to.
We can only check the correctness of the cache topology after the arch
loads the user-configured cache model from MachineState.smp_cache and
consumes the special "default" level by replacing it with the specific
level.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-6-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add cache_supported flags in SMPCompatProps to allow machines to
configure various caches support.
And check the compatibility of the cache properties with the
machine support in machine_parse_smp_cache().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-5-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The x86 and ARM need to allow user to configure cache properties
(current only topology):
* For x86, the default cache topology model (of max/host CPU) does not
always match the Host's real physical cache topology. Performance can
increase when the configured virtual topology is closer to the
physical topology than a default topology would be.
* For ARM, QEMU can't get the cache topology information from the CPU
registers, then user configuration is necessary. Additionally, the
cache information is also needed for MPAM emulation (for TCG) to
build the right PPTT.
Define smp-cache related enumeration and properties in QAPI, so that
user could configure cache properties for SMP system through -machine in
the subsequent patch.
Cache enumeration (CacheLevelAndType) is implemented as the combination
of cache level (level 1/2/3) and cache type (data/instruction/unified).
Currently, separated L1 cache (L1 data cache and L1 instruction cache)
with unified higher-level cache (e.g., unified L2 and L3 caches), is the
most common cache architectures.
Therefore, enumerate the L1 D-cache, L1 I-cache, L2 cache and L3 cache
with smp-cache object to add the basic cache topology support. Other
kinds of caches (e.g., L1 unified or L2/L3 separated caches) can be
added directly into CacheLevelAndType if necessary.
Cache properties (SmpCacheProperties) currently only contains cache
topology information, and other cache properties can be added in it
if necessary.
Note, define cache topology based on CPU topology level with two
reasons:
1. In practice, a cache will always be bound to the CPU container
(either private in the CPU container or shared among multiple
containers), and CPU container is often expressed in terms of CPU
topology level.
2. The x86's cache-related CPUIDs encode cache topology based on APIC
ID's CPU topology layout. And the ACPI PPTT table that ARM/RISCV
relies on also requires CPU containers to help indicate the private
shared hierarchy of the cache. Therefore, for SMP systems, it is
natural to use the CPU topology hierarchy directly in QEMU to define
the cache topology.
With smp-cache QAPI support, add smp cache topology for machine by
parsing the smp-cache object list.
Also add the helper to access/update cache topology level of machine.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-4-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cache topology needs to be defined based on CPU topology levels. Thus,
define CPU topology enumeration in qapi/machine.json to make it generic
for all architectures.
To match the general topology naming style, rename CPU_TOPO_LEVEL_* to
CPU_TOPOLOGY_LEVEL_*, and rename SMT and package levels to thread and
socket.
Also, enumerate additional topology levels for non-i386 arches, and add
a CPU_TOPOLOGY_LEVEL_DEFAULT to help future smp-cache object to work
with compatibility requirement of arch-specific cache topology models.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241101083331.340178-3-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Include the missing "qemu/units.h" to fix when refactoring code:
../hw/core/machine.c:743:34: error: use of undeclared identifier 'MiB'
743 | mc->default_ram_size = 128 * MiB;
| ^
../hw/core/machine.c:750:44: error: use of undeclared identifier 'TiB'
750 | mc->smbios_memory_device_size = 2047 * TiB;
| ^
and "qemu/error-report.h" to fix:
../hw/core/machine.c:1029:13: error: call to undeclared function 'error_report' [-Wimplicit-function-declaration]
1029 | error_report("NUMA node %" PRIu16 " is missing, use "
| ^
../hw/core/machine.c:1240:9: error: call to undeclared function 'warn_report' [-Wimplicit-function-declaration]
1240 | warn_report("CPU model %s is deprecated -- %s",
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240930221900.59525-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replace DEFINE_MACHINE() by DEFINE_TYPES(), converting the
class_init() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-6-philmd@linaro.org>
The machine datasheet mentions the GPIO device as 'xps_gpio'.
Rename it accordingly to easily find its documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-5-philmd@linaro.org>
By default the machine's CPU endianness is 'big' order
('little-endian' property set to %false).
This corresponds to the default when this machine was added;
see commits 6a8b1ae202 "microblaze: Add petalogix s3a1800dsp
MMU linux ref-design." and 72b675caac "microblaze: Hook into
the build-system." which added:
[ "$target_cpu" = "microblaze" ] && target_bigendian=yes
Later commit 877fdc12b1 ("microblaze: Allow targeting
little-endian mb") added little-endian support, forgetting
to set the CPU endianness to little-endian. Not an issue
since this property was never used, but we will use it soon,
so explicit the endianness to get the expected behavior.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-4-philmd@linaro.org>
The petalogix-ml605 machine was explicitly added as little-endian only
machine in commit 00914b7d97 ("microblaze: Add PetaLogix ml605 MMU
little-endian ref design"). Mark the big-endian version as deprecated.
When the xlnx-zynqmp-pmu machine's CPU was added in commit 133d23b3ad
("xlnx-zynqmp-pmu: Add the CPU and memory"), its 'endianness' property
was set to %true, thus wired in little endianness.
Both machine are included in the big-endian system binary, while their
CPU is working in little-endian. Unlikely to work as it. Deprecate now
as broken config so we can remove soon.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-3-philmd@linaro.org>
Alias the 'endian' property as 'little-endian' because the 'ENDI'
bit is set when the endianness is in little order, and unset in
big order.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20241105130431.22564-2-philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <3f61b85c-9382-4520-a1ce-5476eb16fb56@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CXL now can use Generic Port Affinity Structures.
CXL now allows control of link speed and width
vhost-user-blk now supports live resize, by means of
a new device-sync-config command
amd iommu now supports interrupt remapping
pcie devices now report extended tag field support
intel_iommu dropped support for Transient Mapping, to match VTD spec
arch agnostic ACPI infrastructure for vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcpNqUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp/2oH/0qO33prhDa48J5mqT9NuJzzYwp5QHKF9Zjv
fDAplMUEmfxZIEgJchcyDWPYTGX2geT4pCFhRWioZMIR/0JyzrFgSwsk1kL88cMh
46gzhNVD6ybyPJ7O0Zq3GLy5jo7rlw/n+fFxKAuRCzcbK/fmH8gNC+RwW1IP64Na
HDczYilHUhnO7yKZFQzQNQVbK4BckrG1bu0Fcx0EMUQBf4V6x7GLOrT+3hkKYcr6
+DG5DmUmv20or/FXnu2Ye+MzR8Ebx6JVK3A3sXEE4Ns2CCzK9QLzeeyc2aU13jWN
OpZ6WcKF8HqYprIwnSsMTxhPcq0/c7TvrGrazVwna5RUBMyjjvc=
=zSX4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
CXL now can use Generic Port Affinity Structures.
CXL now allows control of link speed and width
vhost-user-blk now supports live resize, by means of
a new device-sync-config command
amd iommu now supports interrupt remapping
pcie devices now report extended tag field support
intel_iommu dropped support for Transient Mapping, to match VTD spec
arch agnostic ACPI infrastructure for vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcpNqUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp/2oH/0qO33prhDa48J5mqT9NuJzzYwp5QHKF9Zjv
# fDAplMUEmfxZIEgJchcyDWPYTGX2geT4pCFhRWioZMIR/0JyzrFgSwsk1kL88cMh
# 46gzhNVD6ybyPJ7O0Zq3GLy5jo7rlw/n+fFxKAuRCzcbK/fmH8gNC+RwW1IP64Na
# HDczYilHUhnO7yKZFQzQNQVbK4BckrG1bu0Fcx0EMUQBf4V6x7GLOrT+3hkKYcr6
# +DG5DmUmv20or/FXnu2Ye+MzR8Ebx6JVK3A3sXEE4Ns2CCzK9QLzeeyc2aU13jWN
# OpZ6WcKF8HqYprIwnSsMTxhPcq0/c7TvrGrazVwna5RUBMyjjvc=
# =zSX4
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 21:03:33 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (65 commits)
intel_iommu: Add missed reserved bit check for IEC descriptor
intel_iommu: Add missed sanity check for 256-bit invalidation queue
intel_iommu: Send IQE event when setting reserved bit in IQT_TAIL
hw/acpi: Update GED with vCPU Hotplug VMSD for migration
tests/qtest/bios-tables-test: Update DSDT golden masters for x86/{pc,q35}
hw/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states
qtest: allow ACPI DSDT Table changes
hw/acpi: Make CPUs ACPI `presence` conditional during vCPU hot-unplug
hw/pci: Add parenthesis to PCI_BUILD_BDF macro
hw/cxl: Ensure there is enough data to read the input header in cmd_get_physical_port_state()
hw/cxl: Ensure there is enough data for the header in cmd_ccls_set_lsa()
hw/cxl: Check that writes do not go beyond end of target attributes
hw/cxl: Ensuring enough data to read parameters in cmd_tunnel_management_cmd()
hw/cxl: Avoid accesses beyond the end of cel_log.
hw/cxl: Check the length of data requested fits in get_log()
hw/cxl: Check enough data in cmd_firmware_update_transfer()
hw/cxl: Check input length is large enough in cmd_events_clear_records()
hw/cxl: Check input includes at least the header in cmd_features_set_feature()
hw/cxl: Check size of input data to dynamic capacity mailbox commands
hw/cxl/cxl-mailbox-util: Fix output buffer index update when retrieving DC extents
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This way both the start and end points of migrating a particular VFIO
device are known.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Convert the LOG_GUEST_ERROR for the "tx descriptor is owned
by software" to a trace message. This condition is normal
when there is there is nothing to transmit, and we would
otherwise spam the logs with it in that situation.
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Signed-off-by: Roque Arcudia Hernandez <roqueh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241014184847.1594056-1-roqueh@google.com
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
printf() unconditionally prints to the console which disturbs `-serial stdio`.
Fix that by converting into a trace event. While at it, add some tracing for
read and write access.
Fixes: 7e7c5e4c1b "Nokia N800 machine support (ARM)."
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241103143330.123596-5-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The same statement is executed unconditionally right before the if statement.
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241103143330.123596-4-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20241103143330.123596-3-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20241103143330.123596-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fixed eMMC size calculation
* Fixed IRQ definitions on AST2700
* Added RTC support to AST2700
* Fixed timer IRQ status on AST2600
* Improved SDHCI model with new registers
* Added -nodefaults support to AST1030
* Provided a way to use an eMMC device without boot partitions
-----BEGIN PGP SIGNATURE-----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=ms8H
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20241104' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fixed eMMC size calculation
* Fixed IRQ definitions on AST2700
* Added RTC support to AST2700
* Fixed timer IRQ status on AST2600
* Improved SDHCI model with new registers
* Added -nodefaults support to AST1030
* Provided a way to use an eMMC device without boot partitions
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmcoo4oACgkQUaNDx8/7
# 7KGYAQ/9GWiwM7SHFD/WTEo6iClQCk+Do3pzGXZPQq7WLqYhBU8mYwSaqMDUtXj+
# MQVywyLxSYaKdCKessN0haATyzEDVRtxKwIRnbrSDWWnxG8NGj2esOTsU6/wgfD4
# FqARaMH91FQB6rY8QbmbGmqTJ1QbWEPXj7v2piJol5dvI2Oe8iqn/6z1Cv4NMXwh
# aYHwSVwcHLD9tfmyXP0DKN/XHLC4pTAOoU96ajcN6RRW+D6vuQEsQq0caZt8CHQc
# I2oSptU+RZF2DPbSeEB42y9I138/kQzTIaVnbBN//NLRwbzRsLlXhA92F2CJyDrD
# FGNQyynteil8F7M5Oab47fFia1QF/v4G45VOAsHpT1tLBsZPKJdRwfLLqDPZbVbG
# 2lAVuukqW0gKoEHsXfVsDzcIxpX81SlUsccHY4kCxsRNnwSzCWaDK9OOTx3CAxjG
# CzzDgQszNr/12dzkWExIhLpMhQNeiUXX1veAH/jzbjyRAKxzjkDYaX2lUC3MfmqX
# irjmzOU0AbtComv4ybeBqtqNmQvUx5/y993Hgakc9mqqCoAm/Fn4qtx6uW5vSSZJ
# w4heyWbzcLp5RIzSYZypWlmgI+3bJgJq2aX276MYqAe3m8PnUCkuW9NTsfb+ARMl
# XGExHPNrAsw7eiiQsTa7Byt/jkEf3KmEp8ye+3cAvJwPgxlDyys=
# =ms8H
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 10:35:54 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20241104' of https://github.com/legoater/qemu:
aspeed: Don't set always boot properties of the emmc device
aspeed: Support create flash devices via command line for AST1030
hw/sd/aspeed_sdhci: Introduce Capabilities Register 2 for SD slot 0 and 1
hw/timer/aspeed: Fix interrupt status does not be cleared for AST2600
hw/timer/aspeed: Fix coding style
aspeed/soc: Support RTC for AST2700
hw/arm/aspeed_ast27x0: Avoid hardcoded '256' in IRQ calculation
hw/arm/aspeed_ast27x0: Use bsa.h for PPI definitions
hw/sd/sdcard: Fix calculation of size when using eMMC boot partitions
hw/arm: enable at24c with aspeed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
-----BEGIN PGP SIGNATURE-----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=vmIG
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu into staging
* Various bug fixes
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmcoEicACgkQZ7MCdqhi
# HK5M8Q//fz+ZkJndXkBjb1Oinx+q+eVtNm2JrvcWIsXyhG3K+6VxYPp69H+SRv/Z
# TWuUqMQPxq8mhQvBJlDAttp/oaUEiOcCRvs/iUoBN12L4mVxXfdoT88TZ4frN3eP
# 8bePq+DW2N/7gpmsJm5CyEZPpcf9AjVHgLRp3KYFkOJ/14uzvuwnocU39gl+2IUh
# MXHTedQgMNXaKorJXk1NVdM6NxMuVhOvwxAs6ya2gwhxyA5tteo5PiQOnDJWkejf
# xg3RRsNzGYcs1Qg/3kFIf3RfEB0aYbPxROM8IfPaJWKN5KnMggj/JAkHyK1x/V3J
# wml7+cB0doMt/yRiuYJhXpyrtOqpvjRWPA6RhxECWW2kwrovv8NAF8IrFnw9NvOQ
# QC66ZaaFcbAcFrVT1e/iggU76d01II6m4OAgKcXw+FRHgps4VU9y83j7ApNnNUWN
# IXp9hkzoHi5VwX0FrG4ELUr2iEf1HASMvM8EZ/0AxzWj5iNtQB8lFsrEdaGVXyIS
# M5JaJeNjCn4koCyYaFSctH5eKtbzIwnGWnDcdTwaOuQ+9itBvY8O+HZalE6sAc5S
# kLFZ7i/Ut/qxbY5pMumt8LKD4pR1SsOxFB8dJCmn/f/tvRGtIVsoY6btNe4M0+24
# 42MxZbWO6W379C32bwbtsPiGA+aLSgShjP4cWm9cgRjz4RJFnwg=
# =vmIG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 00:15:35 GMT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu: (67 commits)
MAINTAINERS: Remove myself as reviewer
MAINTAINERS: Remove myself from XIVE
MAINTAINERS: Remove myself from the PowerNV machines
hw/ppc: Consolidate ppc440 initial mapping creation functions
hw/ppc: Consolidate e500 initial mapping creation functions
tests/qtest: Add XIVE tests for the powernv10 machine
pnv/xive2: TIMA CI ops using alternative offsets or byte lengths
pnv/xive2: TIMA support for 8-byte OS context push for PHYP
pnv/xive: Update PIPR when updating CPPR
pnv/xive: Add special handling for pool targets
ppc/xive2: Support "Pull Thread Context to Odd Thread Reporting Line"
ppc/xive2: Change context/ring specific functions to be generic
ppc/xive2: Support "Pull Thread Context to Register" operation
ppc/xive2: Allow 1-byte write of Target field in TIMA
ppc/xive2: Dump the VP-group and crowd tables with 'info pic'
ppc/xive2: Dump more NVP state with 'info pic'
pnv/xive2: Support for "OS LGS Push" TIMA operation
ppc/xive2: Support TIMA "Pull OS Context to Odd Thread Reporting Line"
pnv/xive2: Define OGEN field in the TIMA
pnv/xive: TIMA patch sets pre-req alignment and formatting changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IEC descriptor is 128-bit invalidation descriptor, must be padded with
128-bits of 0s in the upper bytes to create a 256-bit descriptor when
the invalidation queue is configured for 256-bit descriptors (IQA_REG.DW=1).
Fixes: 02a2cbc872 ("x86-iommu: introduce IEC notifiers")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20241104125536.1236118-4-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VTD spec, a 256-bit descriptor will result in an invalid
descriptor error if submitted in an IQ that is setup to provide hardware
with 128-bit descriptors (IQA_REG.DW=0). Meanwhile, there are old inv desc
types (e.g. iotlb_inv_desc) that can be either 128bits or 256bits. If a
128-bit version of this descriptor is submitted into an IQ that is setup
to provide hardware with 256-bit descriptors will also result in an invalid
descriptor error.
The 2nd will be captured by the tail register update. So we only need to
focus on the 1st.
Because the reserved bit check between different types of invalidation desc
are common, so introduce a common function vtd_inv_desc_reserved_check()
to do all the checks and pass the differences as parameters.
With this change, need to replace error_report_once() call with error_report()
to catch different call sites. This isn't an issue as error_report_once()
here is mainly used to help debug guest error, but it only dumps once in
qemu life cycle and doesn't help much, we need error_report() instead.
Fixes: c0c1d35184 ("intel_iommu: add 256 bits qi_desc support")
Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20241104125536.1236118-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VTD spec, Figure 11-22, Invalidation Queue Tail Register,
"When Descriptor Width (DW) field in Invalidation Queue Address Register
(IQA_REG) is Set (256-bit descriptors), hardware treats bit-4 as reserved
and a value of 1 in the bit will result in invalidation queue error."
Current code missed to send IQE event to guest, fix it.
Fixes: c0c1d35184 ("intel_iommu: add 256 bits qi_desc support")
Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20241104125536.1236118-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI CPU hotplug states must be migrated along with other vCPU
hotplug states to the destination VM. Update the GED's VM State
Description (VMSD) table subsection to conditionally include the CPU
Hotplug VM State Description (VMSD).
Excerpt of GED VMSD State Dump at Source:
"acpi-ged (16)": {
"ged_state": {
"sel": "0x00000000"
},
[...]
"acpi-ged/cpuhp": {
"cpuhp_state": {
"selector": "0x00000005",
"command": "0x00",
"devs": [
{
"is_inserting": false,
"is_removing": false,
"ost_event": "0x00000000",
"ost_status": "0x00000000"
},
[...]
{
"is_inserting": false,
"is_removing": false,
"ost_event": "0x00000000",
"ost_status": "0x00000000"
}
]
}
}
},
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Message-Id: <20241103102419.202225-6-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reflect the QOM vCPUs ACPI CPU hotplug states in the `_STA.Present` and
and `_STA.Enabled` bits when the guest kernel evaluates the ACPI
`_STA` method during initialization, as well as when vCPUs are
hot-plugged or hot-unplugged. If the CPU is present then the its
`enabled` status can be fetched using architecture-specific code [1].
Reference:
[1] Example implementation of architecture-specific hook to fetch CPU
`enabled status
Link: c0b416b11e
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Message-Id: <20241103102419.202225-4-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
