These two fields were added as a part of ARMv7 support patch (back in
2007), were never used by any code, so can be dropped.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Remove a stray #include <stdio.h> from the middle of neon_helper.c:
it was harmless but pointless since we include stdio.h at the top
of the file anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add uses of the float32/float64 boxing and unboxing macros so that
the ARM linux-user targets will compile with USE_SOFTFLOAT_STRUCT_TYPES
enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make softfloat compile with USE_SOFTFLOAT_STRUCT_TYPES defined, by
adding and using new macros const_float16(), const_float32() and
const_float64() so you can use array initializers in an array of
float16/float32/float64 whether the types are bare or wrapped in the
structs.
[aurelien@aurel32.net: do the same for float16]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Neon half-precision conversion operations (VCVT.F16.F32 and
VCVT.F32.F16) use ARM standard floating-point arithmetic, unlike
the VFP versions (VCVTB and VCVTT).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Silence the NaNs that may result from half-precision conversion,
as we do for the other conversions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle NaNs in float16_to_float32(), by defining and
using a float16ToCommonNaN() function, as we do with the other formats.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix various bugs in the single-to-half-precision conversion code:
* input NaNs not correctly converted in IEEE mode
(fixed by defining and using a commonNaNToFloat16())
* wrong values returned when converting NaN/Inf into non-IEEE
half precision value
* wrong values returned for conversion of values which are
on the boundary between denormal and zero for the half
precision format
* zeroes not correctly identified
* excessively large results in non-IEEE mode should
generate InvalidOp, not Overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Honour the default_nan_mode flag when doing conversions between
different floating point formats, as well as when returning a NaN from
a two-operand floating point function. This corrects the behaviour
of float<->double conversions on both ARM and SH4.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a float16 type to softfloat, rather than using bits16 directly.
Also add the missing functions float16_is_quiet_nan(),
float16_is_signaling_nan() and float16_maybe_silence_nan(),
which are needed for the float16 conversion routines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This function is only used within exec.c, so no need to make it public.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu:
linux-user: fix for loopmount ioctl
linux-user: fix build errors for mmap2-only ports
user: speed up init_paths a bit
linux-user: implement sched_{g,s}etaffinity
linux-user/FLAT: allow targets to override FLAT processing
linux-user/FLAT: fix auto-stack sizing
linux-user: decode MAP_{UNINITIALIZED,EXECUTABLE} in strace
linux-user: add ppoll syscall support
linux-user/elfload: add FDPIC support
linux-user: fix sizeof handling for getsockopt
linux-user: Fix possible realloc memory leak
linux-user: Add support for -version option
Fix bit mask used when widening the result of shift on narrow input.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MIPS FPU instructions should start with a clean softfpu status. This
is done for the arithmetic operations and cvt instructions, but not
for round, trunc, ceil and floor.
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The returned value when doing saturating signed 64->32 bit
conversion of a negative number was incorrect due to a missing cast.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VQMOVUN does a signed-to-unsigned saturating conversion. This is
different from both the signed-to-signed and unsigned-to-unsigned
conversions already implemented, so we need a new set of helper
functions (neon_unarrow_sat*).
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case a chrooted build uses XEN or KVM, a looped mount needs to be done to setup the chroot.
The ioctl for loop mount works correctly for arm, mips, ppc32 and sh4, so its now activated.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
The current print_mmap func is only enabled when the target supports the
mmap syscall, but both mmap and mmap2 syscalls use it. This leads to a
build failure when the target supports mmap2 but not mmap.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
The current init_paths code will attempt to opendir() every single file it
finds. This can obviously generated a huge number of syscalls with even a
moderately small sysroot that will fail. Since the readdir() call provides
the file type in the struct itself, use it. On my system, this prevents
over 1000 syscalls from being made at every invocation of a target binary,
and I only have a C library installed.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
This brings flatload.c more in line with the current Linux FLAT loader
which allows targets to handle various FLAT aspects in their own way.
For the common behavior, the new functions get stubbed out.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
The current auto-stack sizing works like it does on a NOMMU system; the
problem is that this only works if the envp/argv arrays are fairly slim.
On a desktop system, this is rarely the case, and can easily blow past
the stack and into data/text regions as the default stack for FLAT progs
is a mere 4KiB. So rather than rely on the NOMMU calculation (which is
only there because NOMMU can't easily allocate gobs of contiguous mem),
calc the full space actually needed and let the MMU host make space.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Some architectures (like Blackfin) only implement ppoll (and skip poll).
So add support for it using existing poll code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Extract from "man realloc":
"If realloc() fails the original block is left untouched;
it is not freed or moved."
Fix a possible memory leak (reported by cppcheck).
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Add support to the linux-user qemu for the -version command line
option, bringing it into line with the system emulation qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
When broadcasting MCEs, we need to set MCIP and RIPV in mcg_status like
it is done for KVM. Use the symbolic constants at this chance.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
qemu_next_alarm_deadline() is needed by MinGW, too.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Set block device in use during block migration, disallow drive_del and
bdrv_truncate for in use devices.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Certain operations such as drive_del or resize cannot be performed
while external users (eg. block migration) reference the block device.
Add a flag to indicate that.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So that ejection of attached device by guest does not free data
in use by block migration instance.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The host part of a block device can be deleted with in progress
block migration.
To fix this, add a reference count to DriveInfo, freeing resources
on last reference.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Different AHCI controllers have a different number of ports, so the core
shouldn't care about the amount of ports available.
This patch makes the number of ports available to the AHCI core runtime
configurable, allowing us to have multiple different AHCI implementations
with different amounts of ports.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ahci code was missing its soft reset functionality. This wasn't really an
issue for Linux guests, but Windows gets confused when the controller doesn't
reset when it tells it so.
Using this patch I can now successfully boot Windows 7 from AHCI using AHCI
enabled SeaBIOS.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The drive sends a d2h init fis on initialization. Usually, the guest doesn't
receive fises yet at that point though, so the delivery is deferred.
Let's reflect that by sending the init fis on fis receive enablement.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sebastian's patch already did a pretty good job at splitting up ICH-9
AHCI code and the AHCI core. We need some more though. Copyright was missing,
the lspci dump belongs to ICH-9, we don't need the AHCI core to have its
own qdev device duplicate.
So let's split them a bit more in this patch, making things easier to
read an understand.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Due to popular request, this patch adds a license header to ahci.h
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
