Add a flags field each row in sse_op_table6 and sse_op_table7.
Initially this is only used as a replacement for the magic SSE41_SPECIAL
pointer. The other flags are mostly relevant for the AVX implementation
but can be applied to SSE as well.
Signed-off-by: Paul Brook <paul@nowt.org>
Message-Id: <20220424220204.2493824-6-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a flags field to each row in sse_op_table1.
Initially this is only used as a replacement for the magic
SSE_SPECIAL and SSE_DUMMY pointers, the other flags are mostly
relevant for the AVX implementation but can be applied to SSE as well.
Signed-off-by: Paul Brook <paul@nowt.org>
Message-Id: <20220424220204.2493824-5-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a convenience macro to get the address of an xmm_regs element within
CPUX86State.
This was originally going to be the basis of an implementation that broke
operations into 128 bit chunks. I scrapped that idea, so this is now a purely
cosmetic change. But I think a worthwhile one - it reduces the number of
function calls that need to be split over multiple lines.
No functional changes.
Signed-off-by: Paul Brook <paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220424220204.2493824-9-paul@nowt.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extracted from a patch by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Write down explicitly the load/store sequence.
Extracted from a patch by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
=0uL/
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-08-31:
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
# ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
# YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
# =0uL/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Aug 2022 16:09:58 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu: (60 commits)
ppc4xx: Fix code style problems reported by checkpatch
ppc/ppc4xx: Fix sdram trace events
hw/ppc/Kconfig: Move imply before select
hw/ppc/sam460ex: Remove PPC405 dependency from sam460ex
ppc405: Move machine specific code to ppc405_boards.c
ppc/ppc405: QOM'ify FPGA
ppc/ppc405: Use an explicit I2C object
hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device
ppc/ppc405: Use an embedded PPCUIC model in SoC state
ppc4xx: Rename ppc405-ebc to ppc4xx-ebc
ppc4xx: Move EBC model to ppc4xx_devs.c
ppc4xx: Rename ppc405-plb to ppc4xx-plb
ppc4xx: Move PLB model to ppc4xx_devs.c
ppc/ppc405: QOM'ify MAL
ppc/ppc405: QOM'ify PLB
ppc/ppc405: QOM'ify POB
ppc/ppc405: QOM'ify OPBA
ppc/ppc405: QOM'ify EBC
ppc/ppc405: QOM'ify DMA
ppc/ppc405: QOM'ify GPIO
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The DPPS (Dot Product) instruction is defined to first sum pairs of
intermediate results, then sum those values to get the final result.
i.e. (A+B)+(C+D)
We incrementally sum the results, i.e. ((A+B)+C)+D, which can result
in incorrect rouding.
For consistency, also change the variable names to the ones used
in the Intel SDM and implement DPPD following the manual.
Based on a patch by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The computation must not overwrite neither the destination
nor the source before the last element has been computed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_put_sregs2() fails to reset 'locked' CR4/CR0 bits upon vCPU reset when
it is in VMX root operation. Do kvm_put_msr_feature_control() before
kvm_put_sregs2() to (possibly) kick vCPU out of VMX root operation. It also
seems logical to do kvm_put_msr_feature_control() before
kvm_put_nested_state() and not after it, especially when 'real' nested
state is set.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220818150113.479917-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure env->nested_state is cleaned up when a vCPU is reset, it may
be stale after an incoming migration, kvm_arch_put_registers() may
end up failing or putting vCPU in a weird state.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220818150113.479917-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This bit is not saved across interrupts, so we must
delay delivering the interrupt until the skip has
been processed.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1118
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We cannot deliver two interrupts simultaneously;
the first interrupt handler must execute first.
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no need to go through cc->tcg_ops when
we know what value that must have.
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While there are no target-specific nonfaulting probes,
generic code may grow some uses at some point.
Note that the attrs argument was incorrect -- it should have
been MEMTXATTRS_UNSPECIFIED. Just use the simpler interface.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When an overflow exception occurs and OE is set the intermediate result
should be adjusted (by subtracting from the exponent) to avoid rounding
to inf. The same applies to an underflow exceptionion and UE (but adding
to the exponent). To do this set the fp_status.rebias_overflow when OE
is set and fp_status.rebias_underflow when UE is set as the FPU will
recalculate in case of a overflow/underflow if the according rebias* is
set.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220805141522.412864-3-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc_cpu_compare_class_pvr_mask() should match the best CPU class in the
family, because it is used by the KVM subsystem to find the host CPU
class. Since commit 03ae4133ab ("target-ppc: Add pvr_match()
callback"), it matches any class in the family (the first one in the
comparison list).
Since commit f30c843ced ("ppc/pnv: Introduce PowerNV machines with
fixed CPU models"), pnv has relied on pnv_match having these new
semantics to check machine compatibility with a CPU family.
Resolve this by adding a parameter to the pvr_match function to select
the best or any match, and restore the old behaviour for the KVM case.
Prior to this fix, e.g., a POWER9 DD2.3 KVM host matches to the
power9_v1.0 class (because that happens to be the first POWER9 family
CPU compared). After the patch, it matches the power9_v2.0 class.
This approach requires pnv_match contain knowledge of the CPU classes
implemented in the same family, which feels ugly. But pushing the 'best'
match down to the class would still require they know about one another
which is not obviously much better. For now this gets things working.
Fixes: 03ae4133ab ("target-ppc: Add pvr_match() callback")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220731013358.170187-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
I2 is 16 bits, not 32.
Found by running valgrind's none/tests/s390x/traps.
Fixes: 1c26875182 ("target-s390: Implement COMPARE AND TRAP")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220817161529.597414-1-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add stfle 197 (processor-activity-instrumentation extension 1) to the
gen16 default model and fence it off for 7.1 and older.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220727135120.12784-1-borntraeger@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The proberi assembler instruction checks the read/write access rights
for the page of a given address and shall return a value of 1 if the
test succeeds and a value of 0 on failure in the target register.
But when run in linux-user mode, qemu currently simply returns the
return code of page_check_range() which returns 0 on success and -1 on
failure, which is the opposite of what proberi should return.
Fix it by checking the return code of page_check_range() and return the
expected return value.
The easiest way to reproduce the issue is by running
"/lib/ld.so.1 --version" in a chroot which fails without this patch.
At startup of ld.so the __canonicalize_funcptr_for_compare() function is
used to resolve the function address out of a function descriptor, which
fails because proberi (due to the wrong return code) seems to indicate
that the given address isn't accessible.
Signed-off-by: Helge Deller <deller@gmx.de>
1. Add some information about how to boot the LoongArch virt
machine by uefi bios and linux kernel and how to access the
source code or binary file.
2. Move the explanation of LoongArch system emulation in the
target/loongarch/README to docs/system/loongarch/loongson3.rst
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220812091957.3338126-1-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The newly added neoverse-n1 CPU has ID register values which indicate
the presence of the Statistical Profiling Extension, because the real
hardware has this feature. QEMU's TCG emulation does not yet
implement SPE, though (not even as a minimal stub implementation), so
guests will crash if they try to use it because the SPE system
registers don't exist.
Force ID_AA64DFR0_EL1.PMSVer to 0 in CPU realize for TCG, so that
we don't advertise to the guest a feature that doesn't exist.
(We could alternatively do this by editing the value that
aarch64_neoverse_n1_initfn() sets for this ID register, but
suppressing the field in realize means we won't re-introduce this bug
when we add other CPUs that have SPE in hardware, such as the
Neoverse-V1.)
An example of a non-booting guest is current mainline Linux (5.19),
when booting in EL2 on the virt board (ie with -machine
virtualization=on).
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220811131127.947334-1-peter.maydell@linaro.org
All of the fpu operations are defined with TCG_CALL_NO_WG, but they
all modify FCSR0. The most efficient way to fix this is to remove
cpu_fcsr0, and instead use explicit load and store operations for the
two instructions that manipulate that value.
Acked-by: Qi Hu <huqi@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reported-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverity notes that we forgot to check the error return from
lock_user() in one place in the handling of the UHI_plog semihosting
call. Add the missing error handling.
report_fault() is rather brutal in that it will call abort(), but
this is the same error-handling used in the rest of this file.
Resolves: Coverity CID 1490684
Fixes: ea4210600d ("target/mips: Avoid qemu_semihosting_log_out for UHI_plog")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220719191737.384744-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
GDB LoongArch fpu use fcc register, update gdb_set_fpu()
and gdb_get_fpu() to match it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220805033523.1416837-6-gaosong@loongson.cn>
Rename loongarch-fpu64.xml to loongarch-fpu.xml and update
loongarch-fpu.xml to match upstream GDB [1]
[1]:https://github.com/bminor/binutils-gdb/blob/master/gdb/features/loongarch/fpu.xml
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220805033523.1416837-5-gaosong@loongson.cn>
GDB LoongArch add a register orig_a0, see the base64.xml [1].
We should add the orig_a0 to match the upstream GDB.
[1]: https://github.com/bminor/binutils-gdb/blob/master/gdb/features/loongarch/base64.xml
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220805033523.1416837-2-gaosong@loongson.cn>
The macros SET_FPU_* are used to set corresponding bits of fcsr.
Unfortunately it forgets to set the result and it causes fcsr's
"CAUSE" never being updated. This patch is to fix this bug.
Signed-off-by: Qi Hu <huqi@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220804132450.314329-1-huqi@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the user queries CPU models via QMP there is a 'deprecated' flag
present, however, this is not done for the CLI '-cpu help' command.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the user queries CPU models via QMP there is a 'deprecated' flag
present, however, this is not done for the CLI '-cpu help' command.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the user queries CPU models via QMP there is a 'deprecated' flag
present, however, this is not done for the CLI '-cpu help' command.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Delay generating the exception until after we know the
insn length, and record that length in env->error_code.
Fixes: 8ec7e3c53d ("target/mips: Use an exception for semihosting")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1126
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Improve wordings in some files
-----BEGIN PGP SIGNATURE-----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=K6RW
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-08-01' of https://gitlab.com/thuth/qemu into staging
- Some fixes for various tests
- Improve wordings in some files
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmLn6aYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWekg/+NVIT1jp3tcbfPIE6pB0vI/AhqN3i2hUd
# zfJ4V3rSe5tg54JpmuuSt542mp4BDM9bPfYcY/DYESWEtW0c9wv80iP/5LFdJF0G
# GYtk7Q4pRXvB32kF0v9OxjCEGPUeEqSRrDrsI/Ify5evEIhr55oHPnDjN/US1Bx+
# TIuVfmyz8jhSPHsUvZzfVyFxkHre1+BWDxgM3zxoHFIaWEscIPE1KhwRILbKIxWx
# MHpL8JLAneGFwljQoUAMCl7GzHkVna59RhqkbBJ+8iTaNGipQj9FhHZBo2CulO0J
# SR7scWowYN8Jt2FNMe3tcKM2xQn/2Fg2TEK4sp6q+hCXhJuvFfWFHBiFYTNpagFA
# LGgZmPfDr4uZtMEqY4AdEZdL14YZcoM9E/RpW7GhSvMHy73wOj16O8luH1bU0jtG
# 6X1VvAZlw8/Son1Tbq2CC6WejlMfJFXSzF6Fy6M7SflMPW44vJOs5uKdW405MYjE
# Pksbfz1rwoNfK+1qBNQop7SccgDRvPtlLf3lDAU9V/JHWVEITs1KTfyS+46U8jKA
# 9SVBzKuTpVd+aXvMgvMAmmqnyvUBPHJ9KcFq4vHNbIETsGaQsXu0Q6waBmpcK8YB
# KUL/g0EsdfhkpVVgKYZ4Bzj7shG6SKTdwc/lUcOt+wQuDrZZzaC+A2cu/6ReQN6T
# BIHtoaxTz8E=
# =K6RW
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Aug 2022 07:56:38 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-08-01' of https://gitlab.com/thuth/qemu:
tests/qtest/migration-test: Run the dirty ring tests only with the x86 target
trivial: Fix duplicated words
misc: fix commonly doubled up words
tests/unit/test-qga: Replace the word 'blacklist' in the guest agent unit test
migration-test: Allow test to run without uffd
migration-test: Use migrate_ensure_converge() for auto-converge
tests/tcg/linux-test: Fix random hangs in test_socket
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The test for the IF block indicates no ID registers are exposed, much
less host support for SVE. Move the SVE probe into the ELSE block.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because we weren't setting this flag, our probe of ID_AA64ZFR0
was always returning zero. This also obviates the adjustment
of ID_AA64PFR0, which had sanitized the SVE field.
The effects of the bug are not visible, because the only thing that
ID_AA64ZFR0 is used for within qemu at present is tcg translation.
The other tests for SVE within KVM are via ID_AA64PFR0.SVE.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Indication for support for SVE will not depend on whether we
perform the query on the main kvm_state or the temp vcpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some files wrongly contain the same word twice in a row.
One of them should be removed or replaced.
Message-Id: <20220722145859.1952732-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
VyV operand is only used in the vshuff and vdeal instructions. These
instructions write to both VyV and VxV operands. In the case where
both operands are the same register, we need a separate location for
VyV. We use the existing vtmp field in CPUHexagonState.
Test case added in tests/tcg/hexagon/hvx_misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220718230320.24444-2-tsimpson@quicinc.com>
1. Rename 'loongson3.c' to 'virt.c' and change the meson.build file.
2. Rename 'loongson3.rst' to 'virt.rst'.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220729073018.27037-2-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
perror() is designed to append the decoded errno value to a
string. This, however, only makes sense if we called something that
actually sets errno prior to that.
For the callers that check for split irqchip support that is not the
case, and we end up with confusing error messages that end in
"success". Use error_report() instead.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220728142446.438177-1-cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Short queue with 2 Coverity fixes and one fix of the
'wait' insns that is causing hangs if the guest kernel uses
the most up to date wait opcode.
- target/ppc:
- implement new wait variants to fix guest hang when using the new opcode
- ppc440_uc: initialize length passed to cpu_physical_memory_map()
- spapr_nvdimm: check if spapr_drc_index() returns NULL
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYuK8VgAKCRA82cqW3gMx
ZOc7AQDPMsFY9NHNqJ3O0MiX4Qoy8IGUreZ9dzZSS3zT1nxtEAD+Lwl0/aGO+dk+
+NiIO80A5Agy/0g8PHie4qR3EqHEnwA=
=Q4eR
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220728' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-07-28:
Short queue with 2 Coverity fixes and one fix of the
'wait' insns that is causing hangs if the guest kernel uses
the most up to date wait opcode.
- target/ppc:
- implement new wait variants to fix guest hang when using the new opcode
- ppc440_uc: initialize length passed to cpu_physical_memory_map()
- spapr_nvdimm: check if spapr_drc_index() returns NULL
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYuK8VgAKCRA82cqW3gMx
# ZOc7AQDPMsFY9NHNqJ3O0MiX4Qoy8IGUreZ9dzZSS3zT1nxtEAD+Lwl0/aGO+dk+
# +NiIO80A5Agy/0g8PHie4qR3EqHEnwA=
# =Q4eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 28 Jul 2022 09:41:58 AM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220728' of https://gitlab.com/danielhb/qemu:
target/ppc: Implement new wait variants
hw/ppc/ppc440_uc: Initialize length passed to cpu_physical_memory_map()
hw/ppc: check if spapr_drc_index() returns NULL in spapr_nvdimm.c
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ISA v2.06 adds new variations of wait, specified by the WC field. These
are not all compatible with the prior wait implementation, because they
add additional conditions that cause the processor to resume, which can
cause software to hang or run very slowly.
At this moment, with the current wait implementation and a pseries guest
using mainline kernel with new wait upcodes [1], QEMU hangs during boot if
more than one CPU is present:
qemu-system-ppc64 -M pseries,x-vof=on -cpu POWER10 -smp 2 -nographic
-kernel zImage.pseries -no-reboot
QEMU will exit (as there's no filesystem) if the test "passes", or hang
during boot if it hits the bug.
ISA v3.0 changed the wait opcode and removed the new variants (retaining
the WC field but making non-zero values reserved).
ISA v3.1 added new WC values to the new wait opcode, and added a PL
field.
This patch implements the new wait encoding and supports WC variants
with no-op implementations, which provides basic correctness as
explained in comments.
[1] https://lore.kernel.org/all/20220720132132.903462-1-npiggin@gmail.com/
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220720133352.904263-1-npiggin@gmail.com>
[danielhb: added information about the bug being fixed]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We got to talking about how Zmmul and M interact with each other
https://github.com/riscv/riscv-isa-manual/issues/869 , and it turns out
that QEMU's behavior is slightly wrong: having Zmmul and M is a legal
combination, it just means that the multiplication instructions are
supported even when M is disabled at runtime via misa.
This just stops overriding M from Zmmul, with that the other checks for
the multiplication instructions work as per the ISA.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220714180033.22385-1-palmer@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In commit 7390e0e9ab, we added support for SME loads and stores.
Unlike SVE loads and stores, these include handling of 128-bit
elements. The SME load/store functions call down into the existing
sve_cont_ldst_elements() function, which uses the element size MO_*
value as an index into the pred_esz_masks[] array. Because this code
path now has to handle MO_128, we need to add an extra element to the
array.
This bug was spotted by Coverity because it meant we were reading off
the end of the array.
Resolves: Coverity CID 1490539, 1490541, 1490543, 1490544, 1490545,
1490546, 1490548, 1490549, 1490550, 1490551, 1490555, 1490557,
1490558, 1490560, 1490561, 1490563
Fixes: 7390e0e9ab ("target/arm: Implement SME LD1, ST1")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220718100144.3248052-1-peter.maydell@linaro.org
store effectively happens before the load. There are two bug fixes
in this series.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmLXIT8ACgkQewJE+xLe
RCKL7gf9E1NE9EXNVpFUcv9E6SvEnZdqxYotXqNi2MduNKe+d9EYvDMEeNgZLWme
ltw9kYuAP41WLTYFQkrx2zCbonYljxEWqouQe8jZUwR78Ig/8GXk0MJ7C4l5AkEy
ZMuTMA59nbU98Ss6E9vbafFegWzZVP0SQcoV5YyHleihJU67we5kG8gNmQliUj93
rahG66gKxVbcUGsknSN6OeGjgPG1vD8EQyrTzIw55alD510Ih2C1I2Xhi1eibbfJ
B1sQulYJ3Q5qBq6GHlZovsz+c0fPQu4bY8j3G3fDcNCjYYEk37DqPNGKiZhIMjRE
DJ5uJhcot7ImCSB3tO5lKKTp9VSY5g==
=1Kkg
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20220719-1' of https://github.com/quic/qemu into staging
Recall that the semantics of a Hexagon mem_noshuf packet are that the
store effectively happens before the load. There are two bug fixes
in this series.
# gpg: Signature made Tue 19 Jul 2022 22:25:19 BST
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20220719-1' of https://github.com/quic/qemu:
Hexagon (target/hexagon) fix bug in mem_noshuf load exception
Hexagon (target/hexagon) fix store w/mem_noshuf & predicated load
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The semantics of a mem_noshuf packet are that the store effectively
happens before the load. However, in cases where the load raises an
exception, we cannot simply execute the store first.
This change adds a probe to check that the load will not raise an
exception before executing the store.
If the load is predicated, this requires special handling. We check
the condition before performing the probe. Since, we need the EA to
perform the check, we move the GET_EA portion inside CHECK_NOSHUF_PRED.
Test case added in tests/tcg/hexagon/mem_noshuf_exception.c
Suggested-by: Alessandro Di Federico <ale@rev.ng>
Suggested-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220707210546.15985-3-tsimpson@quicinc.com>
Call the CHECK_NOSHUF macro multiple times: once in the
fGEN_TCG_PRED_LOAD() and again in fLOAD().
Before this commit, a packet with a store and a predicated
load with mem_noshuf that gets encoded like this:
{ P0 = cmp.eq(R17,#0x0)
memw(R18+#0x0) = R2
if (!P0.new) R3 = memw(R17+#0x4) }
... would end up generating a branch over both the load
and the store like so:
...
brcond_i32 loc17,$0x0,eq,$L1
mov_i32 loc18,store_addr_1
qemu_st_i32 store_val32_1,store_addr_1,leul,0
qemu_ld_i32 loc16,loc7,leul,0
set_label $L1
...
Test cases added to tests/tcg/hexagon/mem_noshuf.c
Co-authored-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220707210546.15985-2-tsimpson@quicinc.com>
Add LoongArch flatted device tree, adding cpu device node, firmware cfg node,
pcie node into it, and create fdt rom memory region. Now fdt info is not
full since only uefi bios uses fdt, linux kernel does not use fdt.
Loongarch Linux kernel uses acpi table which is full in qemu virt
machine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-7-yangxiaojuan@loongson.cn>
[rth: Set TARGET_NEED_FDT, add fdt to meson.build]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should result zero when exception is invalid and operation is nan
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220716085426.3098060-4-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should config cpucfg[20] to set value for the scache's ways, sets,
and size arguments when loongarch cpu init. However, the old code
wirte 'sets argument' twice, so we change one of them to 'size argument'.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715064829.1521482-1-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The boundary size of cpucfg array should be 0 to ARRAY_SIZE(cpucfg)-1.
So, using index bigger than max boundary to access cpucfg[] must be
forbidden.
Fix coverity CID: 1489760
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-6-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix out-of-bounds errors when access excp_names[] array. the valid
boundary size of excp_names should be 0 to ARRAY_SIZE(excp_names)-1.
However, the general code do not consider the max boundary.
Fix coverity CID: 1489758
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-4-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cpu_model argument may already have the '-loongarch-cpu' suffix,
e.g. when using the default for the LS7A1000 machine. If that fails,
try again with the suffix. Validate that the object created by the
function is derived from the proper base class.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-2-yangxiaojuan@loongson.cn>
[rth: Try without and then with the suffix, to avoid testsuite breakage.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vfmin_res() / vfmax_res() are trying to check whether a and b are both
zeroes, but in reality they check that they are the same kind of zero.
This causes incorrect results when comparing positive and negative
zeroes.
Fixes: da4807527f ("s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)")
Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220713182612.3780050-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to PowerISA 3.1B, Book III 6.7.6 programming note, the
page directory base addresses are expected to be aligned to their
size. Real hardware seems to rely on that and will access the
wrong address if they are misaligned. This results in a
translation failure even if the page tables seem to be properly
populated.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220628133959.15131-4-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Check if the number and size of Radix levels are valid on
POWER9/POWER10 CPUs, according to the supported Radix Tree
Configurations described in their User Manuals.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220628133959.15131-3-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Check if partition and process tables are properly aligned, in
their size, according to PowerISA 3.1B, Book III 6.7.6 programming
note. Hardware and KVM also raise an exception in these cases.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220628133959.15131-2-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When using "-machine none", env->tb_env is not allocated, causing the
segmentation fault reported in issue #85 (launchpad bug #811683). To
avoid this problem, check if the pointer != NULL before calling the
methods to print TBU/TBL/DECR.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/85
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220714172343.80539-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Equivalent to CHK_SV and CHK_HV, but can be used in decodetree methods.
Reviewed-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220701133507.740619-3-lucas.coutinho@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
GEN_PRIV and related CHK_* macros just assumed that variable named
"ctx" would be in scope when they are used, and that it would be a
pointer to DisasContext. Change these macros to receive the pointer
explicitly.
Reviewed-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220701133507.740619-2-lucas.coutinho@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This initial version supports the invalidation of one or all
TLB entries. Flush by PID/LPID, or based in process/partition
scope is not supported, because it would make using the
generic QEMU TLB implementation hard. In these cases, all
entries are flushed.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712193741.59134-3-leandro.lupori@eldorado.org.br>
[danielhb: moved 'set' declaration to TLBIE_RIC_PWC block]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Also decode RIC, PRS and R operands.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712193741.59134-2-leandro.lupori@eldorado.org.br>
[danielhb: mark bit 31 in @X_tlbie pattern as ignored]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The 'error' argument of gen_inval_exception will be or-ed with
POWERPC_EXCP_INVAL, so it should always be a constant prefixed with
POWERPC_EXCP_INVAL_. No functional change is intended,
spr_write_excp_vector is only used by register_BookE_sprs, and
powerpc_excp_booke ignores the lower 4 bits of the error code on
POWERPC_EXCP_INVAL exceptions.
Also, take the opportunity to replace printf with qemu_log_mask.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A call to "gen_(hv)priv_exception" should use POWERPC_EXCP_PRIV_* as the
'error' argument instead of POWERPC_EXCP_INVAL_*, and POWERPC_EXCP_FU is
an exception type, not an exception error code. To correctly set
FSCR[IC], we should raise Facility Unavailable with this exception type
and IC value as the error code.
Fixes: 565cb10967 ("target/ppc: add user read/write functions for MMCR0")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POWERPC_EXCP_INVAL should only be or-ed with other constants prefixed
with POWERPC_EXCP_INVAL_. Also, take the opportunity to move both
helpers under #if !defined(CONFIG_USER_ONLY) as the instructions that
use them are privileged.
No functional change is intended, the lower 4 bits of the error code are
ignored by all powerpc_excp_* methods on POWERPC_EXCP_INVAL exceptions.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The only PowerPC implementations with these insns were the 460 and 460F,
which had their definitions removed in [1].
[1] 7ff26aa6c6 ("target/ppc: Remove unused PPC 460 and 460F definitions")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220627141104.669152-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Testing on a POWER9 DD2.3, we observed that the Linux kernel delivers a
signal with si_code ILL_PRVOPC (5) when a userspace application tries to
use slbfee. To obtain this behavior on linux-user, we should use
POWERPC_EXCP_PRIV with POWERPC_EXCP_PRIV_OPC.
No functional change is intended for softmmu targets as
gen_hvpriv_exception uses the same 'exception' argument
(POWERPC_EXCP_HV_EMU) for raise_exception_*, and the powerpc_excp_*
methods do not use lower bits of the exception error code when handling
POWERPC_EXCP_{INVAL,PRIV}.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The code in linux-user/ppc/cpu_loop.c expects POWERPC_EXCP_PRIV
exception with error POWERPC_EXCP_PRIV_OPC or POWERPC_EXCP_PRIV_REG,
while POWERPC_EXCP_INVAL_SPR is expected in POWERPC_EXCP_INVAL
exceptions. This mismatch caused an EXCP_DUMP with the message "Unknown
privilege violation (03)", as seen in [1].
[1] https://gitlab.com/qemu-project/qemu/-/issues/588
Fixes: 9b2fadda3e ("ppc: Rework generation of priv and inval interrupts")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/588
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220627141104.669152-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some systems have /proc/device-tree/cpus/../clock-frequency. However,
this is not the expected path for a CPU device tree directory.
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712210810.35514-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The architecture requires that for faults on loads and stores which
do writeback, the syndrome information does not have the ISS
instruction syndrome information (i.e. ISV is 0). We got this wrong
for the load and store instructions covered by disas_ldst_reg_imm9().
Calculate iss_valid correctly so that if the insn is a writeback one
it is false.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1057
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220715123323.1550983-1-peter.maydell@linaro.org
In regime_tcr() we return the appropriate TCR register for the
translation regime. For Secure EL2, we return the VSTCR_EL2 value,
but in this translation regime some fields that control behaviour are
in VTCR_EL2. When this code was originally written (as the comment
notes), QEMU didn't care about any of those fields, but we have since
added support for features such as LPA2 which do need the values from
those fields.
Synthesize a TCR value by merging in the relevant VTCR_EL2 fields to
the VSTCR_EL2 value.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1103
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-8-peter.maydell@linaro.org
Change the representation of the TCR_EL* registers in the CPU state
struct from struct TCR to uint64_t. This allows us to drop the
custom vmsa_ttbcr_raw_write() function, moving the "enforce RES0"
checks to their more usual location in the writefn
vmsa_ttbcr_write(). We also don't need the resetfn any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-7-peter.maydell@linaro.org
Change the representation of the VSTCR_EL2 and VTCR_EL2 registers in
the CPU state struct from struct TCR to uint64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-6-peter.maydell@linaro.org
We have a bug in our handling of accesses to the AArch32 VTCR
register on big-endian hosts: we were not adjusting the part of the
uint64_t field within TCR that the generated code would access. That
can be done with offsetoflow32(), by using an ARM_CP_STATE_BOTH cpreg
struct, or by defining a full set of read/write/reset functions --
the various other TCR cpreg structs used one or another of those
strategies, but for VTCR we did not, so on a big-endian host VTCR
accesses would touch the wrong half of the register.
Use offsetoflow32() in the VTCR register struct. This works even
though the field in the CPU struct is currently a struct TCR, because
the first field in that struct is the uint64_t raw_tcr.
None of the other TCR registers have this bug -- either they are
AArch64 only, or else they define resetfn, writefn, etc, and
expect to be passed the full struct pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-5-peter.maydell@linaro.org
The only caller of regime_tcr() is now regime_tcr_value(); fold the
two together, and use the shorter and more natural 'regime_tcr'
name for the new function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-4-peter.maydell@linaro.org
In get_level1_table_address(), instead of using precalculated values
of mask and base_mask from the TCR struct, calculate them directly
(in the same way we currently do in vmsa_ttbcr_raw_write() to
populate the TCR struct fields).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-3-peter.maydell@linaro.org
The regime_tcr() function returns a pointer to a struct TCR
corresponding to the TCR controlling a translation regime. The
struct TCR has the raw value of the register, plus two fields mask
and base_mask which are used as a small optimization in the case of
32-bit short-descriptor lookups. Almost all callers of regime_tcr()
only want the raw register value. Define and use a new
regime_tcr_value() function which returns only the raw 64-bit
register value.
This is a preliminary to removing the 32-bit short descriptor
optimization -- it only saves a handful of bit operations, which is
tiny compared to the overhead of doing a page table walk at all, and
the TCR struct is awkward and makes fixing
https://gitlab.com/qemu-project/qemu/-/issues/1103 unnecessarily
difficult.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-2-peter.maydell@linaro.org
The documentation for PROT_MTE says that it cannot be cleared
by mprotect. Further, the implementation of the VM_ARCH_CLEAR bit,
contains PROT_BTI confiming that bit should be cleared.
Introduce PAGE_TARGET_STICKY to allow target/arch/cpu.h to control
which bits may be reset during page_set_flags. This is sort of the
opposite of VM_ARCH_CLEAR, but works better with qemu's PAGE_* bits
that are separate from PROT_* bits.
Reported-by: Vitaly Buka <vitalybuka@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220711031420.17820-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were only checking for SVE disabled and not taking into
account PSTATE.SM to check SME disabled, which resulted in
vectors being incorrectly truncated.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220713045848.217364-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When PSTATE.SM, VL = SVL even if SVE is disabled.
This is visible in kselftest ssve-test.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220713045848.217364-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass through RDPID and RDTSCP support in CPUID if host supports it.
Correctly detect if CPU_BASED_TSC_OFFSET and CPU_BASED2_RDTSCP would
be supported in primary and secondary processor-based VM-execution
controls. Enable RDTSCP in secondary processor controls if RDTSCP
support is indicated in CPUID.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <20220214185605.28087-7-f4bug@amsat.org>
Tested-by: Silvio Moioli <moio@suse.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1011
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Inline these macros into the only two callers.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220628111701.677216-9-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
With semihosting_get_arg, we already have a check vs argc, so
there's no point replicating it -- just check the result vs NULL.
Merge copy_argn_to_target into its caller.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-8-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Always log the assert locally. Do not report_fault, but
instead include the fact of the fault in the assertion.
Don't bother freeing allocated strings before the abort().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-6-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use semihost_sys_write and/or qemu_semihosting_console_write
for implementing plog. When using gdbstub, copy the temp
string below the stack so that gdb has a guest address from
which to perform the log.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-5-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This separates guest file descriptors from host file descriptors,
and utilizes shared infrastructure for integration with gdbstub.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-4-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We don't implement it with _WIN32 hosts, and the syscall
is missing from the gdb remote file i/o interface.
Since we can't implement it universally, drop it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The UHI specification does not have an EFAULT value,
and further specifies that "undefined UHI operations
should not return control to the target".
So, log the error and abort.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch introduces Octeon-specific decoder and implements
check-bit-and-jump instructions.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165572672705.167724.16667636081912075906.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch adds decodetree for Cavium Octeon extension and
an instruction set extension flag for using it in CPU models.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165572672162.167724.13656301229517693806.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Enable SME, TPIDR2_EL0, and FA64 if supported by the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-45-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There's no reason to set CPACR_EL1.ZEN if SVE disabled.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that SME remains effectively disabled for user-only,
because we do not yet set CPACR_EL1.SMEN. This needs to
wait until the kernel ABI is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can handle both exception entry and exception return by
hooking into aarch64_sve_change_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is SMOPA, SUMOPA, USMOPA_s, UMOPA, for both Int8 and Int16.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can reuse the SVE functions for LDR and STR, passing in the
base of the ZA vector and a zero offset.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a TCGv_ptr base argument, which will be cpu_env for SVE.
We will reuse this for SME save and restore array insns.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We cannot reuse the SVE functions for LD[1-4] and ST[1-4],
because those functions accept only a Zreg register number.
For SME, we want to pass a pointer into ZA storage.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can reuse the SVE functions for implementing moves to/from
horizontal tile slices, but we need new ones for moves to/from
vertical tile slices.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These SME instructions are nominally within the SVE decode space,
so we add them to sve.decode and translate-sve.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pseudocode for CheckSVEEnabled gains a check for Streaming
SVE mode, and for SME present but SVE absent.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions will be used to verify that the cpu
is in the correct state for a given instruction.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap if full
a64 support is not enabled in streaming mode. In this case, introduce
PRF_ns (prefetch non-streaming) to handle the checks.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark ADR as a non-streaming instruction, which should trap
if full a64 support is not enabled in streaming mode.
Removing entries from sme-fa64.decode is an easy way to see
what remains to be done.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new behaviour is in the ARM pseudocode function
AArch64.CheckFPAdvSIMDEnabled, which applies to AArch32
via AArch32.CheckAdvSIMDOrFPEnabled when the EL to which
the trap would be delivered is in AArch64 mode.
Given that ARMv9 drops support for AArch32 outside EL0, the trap EL
detection ought to be trivially true, but the pseudocode still contains
a number of conditions, and QEMU has not yet committed to dropping A32
support for EL[12] when v9 features are present.
Since the computation of SME_TRAP_NONSTREAMING is necessarily different
for the two modes, we might as well preserve bits within TBFLAG_ANY and
allocate separate bits within TBFLAG_A32 and TBFLAG_A64 instead.
Note that DDI0616A.a has typos for bits [22:21] of LD1RO in the table
of instructions illegal in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes the build rules for the decoder, and the
new file for translation, but excludes any instructions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dump SVCR, plus use the correct access check for Streaming Mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix booting from devices that use 4k sectors, but are not like DASDs
* Re-evaluate pending interrupts after EXECUTE of certain instructions
-----BEGIN PGP SIGNATURE-----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=UsTi
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-07-07' of https://gitlab.com/thuth/qemu into staging
* Check validity of the address in the SET PREFIX instruction
* Fix booting from devices that use 4k sectors, but are not like DASDs
* Re-evaluate pending interrupts after EXECUTE of certain instructions
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmLGhkURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbU76Q//Y4mEXxWZDpJTg7tL5SZP+UzBVttnCifv
# 6q+2I0keOUs6wFhPq8TzBqkazT9wlv51cNrY2Q3fU9I3dpDeRbAXZR34UD4kw5an
# Q+ZQcebuGSKLjzMrIb1DLAieq8OmZR5FvDUu16BbeJr6GIQIE80lMRfWh9j30UfW
# tlxkXr15BnyPx6m0rSGwzkZD2vgfj5zSUrDtYJcUsfypIA9OOBMA7yNGNlO+d94V
# UZiKgNQtAoBNm4hZh2M86nsUtem+WpMTZQnDnCpMLYvFV/u9jRQBFSR+Ay41hcEN
# WYuLK61rkjc9gPWSjeNNT28x8RMvFJU4YNn1UDiMRSzrigxeui6MOW3SI/h3y6tI
# 94yXmXV2IuDMibvOjK07nkDaEItqPxfj6zuM2xW1Nc+l8Sk12korFBpk/AZiD0Jo
# R3u36efci3zNqDRDJvhGUv8sGcv0mwO7Agq1Bm3h5941gYwzQKILHCShL7DPzvQa
# h+K1MsT7vWfh5++unkGUrN/Zd9CazEylbDuWtywK8lgQcTGDO/9rab8GeXfH/5es
# Tp0RGJwxmalgrAHZPK9lqgpQaGw92ct2G5odvc82EXQhgccnN9mh54BHPfdKs95E
# JZVrXtZH3Gtgl5MGZ+yJevWSc9h1iRnRF4a7QC3UlVBjA/9yAWzQUAnNGZOamE/s
# F+pi89oWLn8=
# =UsTi
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Jul 2022 12:37:49 PM +0530
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-07-07' of https://gitlab.com/thuth/qemu:
target/s390x: Exit tb after executing ex_value
target/s390x: Remove DISAS_PC_STALE_NOCHAIN
target/s390x: Remove DISAS_PC_STALE
target/s390x: Remove DISAS_GOTO_TB
pc-bios/s390-ccw: Update the s390-ccw bios binaries with the virtio-blk fixes
pc-bios/s390-ccw/netboot.mak: Ignore Clang's warnings about GNU extensions
pc-bios/s390-ccw/virtio: Remove "extern" keyword from prototypes
pc-bios/s390-ccw/virtio-blkdev: Request the right feature bits
pc-bios/s390-ccw: Split virtio-scsi code from virtio_blk_setup_device()
pc-bios/s390-ccw/virtio: Beautify the code for reading virtqueue configuration
pc-bios/s390-ccw/virtio: Read device config after feature negotiation
pc-bios/s390-ccw/virtio: Set missing status bits while initializing
pc-bios/s390-ccw/virtio-blkdev: Remove virtio_assume_scsi()
pc-bios/s390-ccw/virtio-blkdev: Simplify/fix virtio_ipl_disk_is_valid()
pc-bios/s390-ccw/bootmap: Improve the guessing logic in zipl_load_vblk()
pc-bios/s390-ccw/virtio: Introduce a macro for the DASD block size
pc-bios/s390-ccw: Add a proper prototype for main()
target/s390x/tcg: SPX: check validity of new prefix
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 39a1fd2528 we fixed a bug in the handling of LPAE block
descriptors where we weren't correctly zeroing out some RES0 bits.
However this fix has a bug because the calculation of the mask is
done at the wrong width: in
descaddr &= ~(page_size - 1);
page_size is a target_ulong, so in the 'qemu-system-arm' binary it is
only 32 bits, and the effect is that we always zero out the top 32
bits of the calculated address. Fix the calculation by forcing the
mask to be calculated with the same type as descaddr.
This only affects 32-bit CPUs which support LPAE (e.g. cortex-a15)
when used on board models which put RAM or devices above the 4GB
mark and when the 'qemu-system-arm' executable is being used.
It was also masked in 7.0 by the main bug reported in
https://gitlab.com/qemu-project/qemu/-/issues/1078 where the
virt board incorrectly does not enable 'highmem' for 32-bit CPUs.
The workaround is to use 'qemu-system-aarch64' with the same
command line.
Reported-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220627134620.3190252-1-peter.maydell@linaro.org
Fixes: 39a1fd2528 ("target/arm: Fix handling of LPAE block descriptors")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture defines the OS DoubleLock as a register which
(similarly to the OS Lock) suppresses debug events for use in CPU
powerdown sequences. This functionality is required in Arm v7 and
v8.0; from v8.2 it becomes optional and in v9 it must not be
implemented.
Currently in QEMU we implement the OSDLR_EL1 register as a NOP. This
is wrong both for the "feature implemented" and the "feature not
implemented" cases: if the feature is implemented then the DLK bit
should read as written and cause suppression of debug exceptions, and
if it is not implemented then the bit must be RAZ/WI.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting with v7 of the debug architecture, there are three extra
ID registers that add information on top of that provided in
DBGDIDR. These are DBGDEVID, DBGDEVID1 and DBGDEVID2. In the
v7 debug architecture, DBGDEVID is optional, present only of
DBGDIDR.DEVID_imp is set. In v7.1 all three must be present.
Implement the missing registers. Note that we only need to set the
values in the ARMISARegisters struct for the CPUs Cortex-A7, A15,
A53, A57 and A72 (plus the 32-bit 'max' which uses the Cortex-A53
values): earlier CPUs didn't implement v7 of the architecture, and
our other 64-bit CPUs (Cortex-A76, Neoverse-N1 and A64fx) don't have
AArch32 support at EL1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-5-peter.maydell@linaro.org
The "OS Lock" in the Arm debug architecture is a way for software
to suppress debug exceptions while it is trying to power down
a CPU and save the state of the breakpoint and watchpoint
registers. In QEMU we implemented the support for writing
the OS Lock bit via OSLAR_EL1 and reading it via OSLSR_EL1,
but didn't implement the actual behaviour.
The required behaviour with the OS Lock set is:
* debug exceptions (apart from BKPT insns) are suppressed
* some MDSCR_EL1 bits allow write access to the corresponding
EDSCR external debug status register that they shadow
(we can ignore this because we don't implement external debug)
* similarly with the OSECCR_EL1 which shadows the EDECCR
(but we don't implement OSECCR_EL1 anyway)
Implement the missing behaviour of suppressing debug
exceptions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-4-peter.maydell@linaro.org
The target/arm/helper.c file is very long and is a grabbag of all
kinds of functionality. We have already a debug_helper.c which has
code for implementing architectural debug. Move the code which
defines the debug-related system registers out to this file also.
This affects the define_debug_regs() function and the various
functions and arrays which are used only by it.
The functions raw_write() and arm_mdcr_el2_eff() and
define_debug_regs() now need to be global rather than local to
helper.c; everything else is pure code movement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-3-peter.maydell@linaro.org
Before moving debug system register helper functions to a
different file, fix the code style issues (mostly block
comment syntax) so checkpatch doesn't complain about the
code-motion patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-2-peter.maydell@linaro.org
Fixes a bug in that we were not honoring MTE from user-only
SVE. Copy the user-only MTE logic from allocation_tag_mem
into sve_probe_page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The comment was correct, but the test was not:
disable mte if tagged is *not* set.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When EXECUTE sets ex_value to interrupt the constructed instruction,
we implicitly disable interrupts so that the value is not corrupted.
Exit to the main loop after execution, so that we re-evaluate any
pending interrupts.
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace this with a flag: exit_to_mainloop.
We can now control the exit for each of DISAS_TOO_MANY,
DISAS_PC_UPDATED, and DISAS_PC_CC_UPDATED, and fold in
the check for PER.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing to distinguish this from DISAS_TOO_MANY.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing to distinguish this from DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 80d11f4467 ("Add definitions for Freescale PowerPC implementations")
changed core type of MPC8555 and MPC8560 from e500v1 to e500v2.
But both MPC8555 and MPC8560 have just e500v1 cores, there are no features
of e500v2 cores. It can be verified by reading NXP documentations:
https://www.nxp.com/docs/en/data-sheet/MPC8555EEC.pdfhttps://www.nxp.com/docs/en/data-sheet/MPC8560EC.pdfhttps://www.nxp.com/docs/en/reference-manual/MPC8555ERM.pdfhttps://www.nxp.com/docs/en/reference-manual/MPC8560RM.pdf
Therefore fix core type of MPC8555 and MPC8560 back to e500v1.
Just for completeness, here is list of all Motorola/Freescale/NXP
processors which were released and have e500v1 or e500v2 cores:
e500v1: MPC8540 MPC8541 MPC8555 MPC8560
e500v2: BSC9131 BSC9132
C291 C292 C293
MPC8533 MPC8535 MPC8536 MPC8543 MPC8544 MPC8545 MPC8547
MPC8548 MPC8567 MPC8568 MPC8569 MPC8572
P1010 P1011 P1012 P1013 P1014 P1015 P1016 P1020 P1021
P1022 P1024 P1025 P2010 P2020
Sorted alphabetically; not by release date / generation / feature set.
All this is from public information available on NXP website.
Seems that qemu has support only for some subset of MPC85xx processors.
Historically processors with e500 cores have mpc85xx family codename and
lot of software have them in mpc85xx architecture subdirectory.
Note that GCC uses -mcpu=8540 option for specifying e500v1 core and
-mcpu=8548 option for specifying e500v2 core.
So sometimes (mpc)8540 is alias for e500v1 and (mpc)8548 is alias for
e500v2.
Fixes: 80d11f4467 ("Add definitions for Freescale PowerPC implementations")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220703195029.23793-1-pali@kernel.org>
[danielhb: added more context in the commit msg]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU emulates a *lot* of PowerPC-based machines - having a CPU
that is named "default" and cannot be used with most of those
machines sounds just wrong. Thus let's remove this old and confusing
alias now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220705151030.662140-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All ppc CPUs represent hardware that exists in the real world, i.e.: we
do not have a "max" CPU with all possible emulated features enabled.
Return the default CPU type for the machine because that has greater
chance of being useful as the "max" CPU.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1038
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Matheus K. Ferst <matheus.ferst@eldorado.org.br>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220628205513.81917-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implements the Convert Declets To Binary Coded Decimal instruction.
Since libdecnumber doesn't expose the methods for direct conversion
(decDigitsFromDPD, DPD2BCD, etc), a positive decimal32 with zero
exponent is used as an intermediate value to convert the declets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220629162904.105060-12-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implements the Convert Binary Coded Decimal To Declets instruction.
Since libdecnumber doesn't expose the methods for direct conversion
(decDigitsToDPD, BCD2DPD, etc.), the BCD values are converted to
decimal32 format, from which the declets are extracted.
Where the behavior is undefined, we try to match the result observed in
a POWER9 DD2.3.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220629162904.105060-11-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Adds an insns_flags2 for the BCD assist instructions introduced in
Power ISA 2.06. These instructions are not listed in the manuals for
e5500[1] and e6500[2], so the flag is only added for POWER7/8/9/10
models.
[1] https://www.nxp.com/files-static/32bit/doc/ref_manual/EREF_RM.pdf
[2] https://www.nxp.com/docs/en/reference-manual/E6500RM.pdf
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220629162904.105060-9-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some lines in insn32.decode have inconsistent alignment when compared
to others.
Fix this by changing the alignment of some lines, making it more
consistent throughout the file.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220629162904.105060-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It keeps repeating, move it to the header. This uses __builtin_ffsll() to
allow using the macros in #define.
This is not using the QEMU's FIELD macros as this would require changing
all such macros found in skiboot (the PPC PowerNV firmware).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220628080544.1509428-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
And also move the insn to decodetree and remove the now unused
avr_qw_not, avr_qw_cmpu, and avr_qw_add methods.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220606150037.338931-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
And also move the insns to decodetree.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220606150037.338931-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
And also move the insn to decodetree
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220606150037.338931-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
And also move the insn to decodetree.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220606150037.338931-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
And also move the insns to decodetree and remove the now unused
avr_qw_addc method.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220606150037.338931-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
And also move the insn to decodetree.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220606150037.338931-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Also drop VECTOR_FOR_INORDER_I usage since there is no need to access
the elements in any particular order, and move the instruction to
decodetree.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220606150037.338931-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
FPSCR_* bit values in QEMU are in the 'inverted' order from what Power
ISA defines (e.g. FPSCR.FI is bit 46 but is defined as 17 in cpu.h).
Now that PPC_BIT_NR macro was introduced to fix this situation for the
MSR bits, we can use it for the FPSCR bits too.
Also, adjust the comments to make then fit in 80 columns
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220622193203.127698-1-victor.colombo@eldorado.org.br>
[danielhb: fixed 'exceptio' typo in target/ppc/cpu.h]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
According to the architecture, SET PREFIX must try to access the new
prefix area and recognize an addressing exception if the area is not
accessible.
For qemu this check prevents a crash in cpu_map_lowcore after an
inaccessible prefix area has been set.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220630094340.3646279-1-scgl@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Fix edk2/opensbi jobs to not run automatically by accident
* Improve timings in the migration qtest
* Remove libvixl disassembler
* Add ukrainian translation
* Require a recent version of libpng
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmLECEkRHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbV7lxAAmEItM6PIoW58eWPzReKVH8LE2w3UlvOZ
JQhNgJjuN23fqjUVkcT0yCfdNCz/nKvafHnxfHQnrAXyB5V5vU8ovBgSuWK2mcmD
NTFK+/2x5lcsyBrOe3QoeD2g1r7+Os3AYVkdnN/t2HAMLwQyaoshKaMV/UHC9O/i
Kle1svYRNyCgyXJgxaOdbVMBSLi/L9h2R5AaG31GIi9wnf0n8HDH/ONtmeIpN09g
BlMeZqPhGJT+tpMvviif65/Za57Y9h/r+TOgEIIs00cWmxqaBmcXXN9qog2s0n7A
nOm3ck2lpGJCQ6+sl6/Mphyr3X6nWHsxGrLDElS0Ba5bg6T/Xqfg2pBcb81Klkjc
QcTdFPiMxKUczgpFq326sqiaVzMgys4vwnW5iPSd5swNzrkYKADAIreki5jyM3cH
lohBG/ruOmg5xMkX2K6pra0iOAeCz44Ku/HTREfY1CTUgEQZJY4SZrMJSnmUTnM+
EQCkDcmOsnFDaQazneCbo18l37cXOgEhH8VoGAOqg1aRjr7TNlsJzx87PoD+9zNR
GEh7kp18ABRGik5ZACdLQ/HhhOJa8+UWsGCwCdeBGv/TVug1Byz0OUG0PxX3X5SV
WwubeKyZcqzoH92SQI3jZGSmuGBySy9q51T2k8FjZvaDsPiUN/MLPspNezH1qj2B
W7qEaqIyGmo=
=Q2vV
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-07-05' of https://gitlab.com/thuth/qemu into staging
* Fix memory leak in test-cutils
* Fix edk2/opensbi jobs to not run automatically by accident
* Improve timings in the migration qtest
* Remove libvixl disassembler
* Add ukrainian translation
* Require a recent version of libpng
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmLECEkRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbV7lxAAmEItM6PIoW58eWPzReKVH8LE2w3UlvOZ
# JQhNgJjuN23fqjUVkcT0yCfdNCz/nKvafHnxfHQnrAXyB5V5vU8ovBgSuWK2mcmD
# NTFK+/2x5lcsyBrOe3QoeD2g1r7+Os3AYVkdnN/t2HAMLwQyaoshKaMV/UHC9O/i
# Kle1svYRNyCgyXJgxaOdbVMBSLi/L9h2R5AaG31GIi9wnf0n8HDH/ONtmeIpN09g
# BlMeZqPhGJT+tpMvviif65/Za57Y9h/r+TOgEIIs00cWmxqaBmcXXN9qog2s0n7A
# nOm3ck2lpGJCQ6+sl6/Mphyr3X6nWHsxGrLDElS0Ba5bg6T/Xqfg2pBcb81Klkjc
# QcTdFPiMxKUczgpFq326sqiaVzMgys4vwnW5iPSd5swNzrkYKADAIreki5jyM3cH
# lohBG/ruOmg5xMkX2K6pra0iOAeCz44Ku/HTREfY1CTUgEQZJY4SZrMJSnmUTnM+
# EQCkDcmOsnFDaQazneCbo18l37cXOgEhH8VoGAOqg1aRjr7TNlsJzx87PoD+9zNR
# GEh7kp18ABRGik5ZACdLQ/HhhOJa8+UWsGCwCdeBGv/TVug1Byz0OUG0PxX3X5SV
# WwubeKyZcqzoH92SQI3jZGSmuGBySy9q51T2k8FjZvaDsPiUN/MLPspNezH1qj2B
# W7qEaqIyGmo=
# =Q2vV
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 05 Jul 2022 03:15:45 PM +0530
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-07-05' of https://gitlab.com/thuth/qemu:
include/qemu/host-utils: Remove unused code in the *_overflow wrappers
meson.build: Require a recent version of libpng
po: add ukrainian translation
disas: Remove libvixl disassembler
tests: use consistent bandwidth/downtime limits in migration tests
tests: increase migration test converge downtime to 30 seconds
tests: wait for migration completion before looking for STOP event
tests: wait max 120 seconds for migration test status changes
gitlab-ci: Extend timeout for ubuntu-20.04-s390x-all to 75m
gitlab: honour QEMU_CI variable in edk2/opensbi jobs
gitlab: tweak comments in edk2/opensbi jobs
gitlab: normalize indentation in edk2/opensbi rules
tests/fp: Do not build softfloat3 tests if TCG is disabled
tests: fix test-cutils leaks
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should make sure that tlb is clean when cpu reset.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220705070950.2364243-1-gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The disassembly via capstone should be superiour to our old vixl
sources nowadays, so let's finally cut this old disassembler out
of the QEMU source tree.
Message-Id: <20220603164249.112459-1-thuth@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is such error info when running linux kernel:
tcg_handle_interrupt: assertion failed: (qemu_mutex_iothread_locked()).
calling stack:
#0 in raise () at /lib64/libc.so.6
#1 in abort () at /lib64/libc.so.6
#2 in g_assertion_message_expr.cold () at /lib64/libglib-2.0.so.0
#3 in g_assertion_message_expr () at /lib64/libglib-2.0.so.0
#4 in tcg_handle_interrupt (cpu=0x632000030800, mask=2) at ../accel/tcg/tcg-accel-ops.c:79
#5 in cpu_interrupt (cpu=0x632000030800, mask=2) at ../softmmu/cpus.c:248
#6 in loongarch_cpu_set_irq (opaque=0x632000030800, irq=11, level=0)
at ../target/loongarch/cpu.c:100
#7 in helper_csrwr_ticlr (env=0x632000039440, val=1) at ../target/loongarch/csr_helper.c:85
#8 in code_gen_buffer ()
#9 in cpu_tb_exec (cpu=0x632000030800, itb=0x7fff946ac280, tb_exit=0x7ffe4fcb6c30)
at ../accel/tcg/cpu-exec.c:358
Add mutex iothread lock around loongarch_cpu_set_irq in csrwr_ticlr() to
fix the bug.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220701093407.2150607-10-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By the manual of LoongArch CSR, the VS field(18:16 bits) of
ECFG reg means that the number of instructions between each
exception entry is 2^VS.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220701093407.2150607-9-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some functions and member of the structure are different with softmmu-mode
So we need adjust them to support user-mode.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220624031049.1716097-12-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220624031049.1716097-11-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Raise EXCCODE_BCE instead of EXCCODE_ADEM for helper_asrtle_d/asrtgt_d.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220624031049.1716097-10-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
loongarch_cpu_do_interrupt() should update CSR_BADV for some EXCCODE.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220624031049.1716097-9-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can use CSR_BADV to replace badaddr.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220624031049.1716097-8-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The latest AIA draft v0.3.0 defines a relatively simpler scheme for
default priority assignments where:
1) local interrupts 24 to 31 and 48 to 63 are reserved for custom use
and have implementation specific default priority.
2) remaining local interrupts 0 to 23 and 32 to 47 have a recommended
(not mandatory) priority assignments.
We update the default priority table and hviprio mapping as-per above.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220616031543.953776-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on architecture review committee feedback, the [m|s|vs]seteienum,
[m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are
removed in the latest AIA draft v0.3.0 specification.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)
These CSRs were mostly for software convenience and software can always
use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt
file bits.
We update the IMSIC CSR emulation as-per above to match the latest AIA
draft specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220616031543.953776-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The minimum priv spec versino for mcountinhibit to v1.11 so that it
is not available for v1.10 (or lower).
Fixes: eab4776b2bad ("target/riscv: Add support for hpmcounters/hpmevents")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220628101737.786681-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The riscv_cpu_realize() sets priv spec version to v1.12 when it is
when "env->priv_ver == 0" (i.e. default v1.10) because the enum
value of priv spec v1.10 is zero.
Due to above issue, the sifive_u machine will see priv spec v1.12
instead of priv spec v1.10.
To fix this issue, we set latest priv spec version (i.e. v1.12)
for base rv64/rv32 cpu and riscv_cpu_realize() will override priv
spec version only when "cpu->cfg.priv_spec != NULL".
Fixes: 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220611080107.391981-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Ibex CPU supports version 1.11 of the priv spec [1], so let's
correct that in QEMU as well.
1: https://ibex-core.readthedocs.io/en/latest/01_overview/compliance.html
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220629233102.275181-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is nothing in the RISC-V spec that mandates version 1.12 is
required for ePMP and there is currently hardware [1] that implements
ePMP (a draft version though) with the 1.11 priv spec.
1: https://ibex-core.readthedocs.io/en/latest/01_overview/compliance.html
Fixes: a4b2fa4331 ("target/riscv: Introduce privilege version field in the CSR ops.")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220629233102.275181-2-alistair.francis@opensource.wdc.com>
mcycle/minstret are actually WARL registers and can be written with any
given value. With SBI PMU extension, it will be used to store a initial
value provided from supervisor OS. The Qemu also need prohibit the counter
increment if mcountinhibit is set.
Support mcycle/minstret through generic counter infrastructure.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-8-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With SBI PMU extension, user can use any of the available hpmcounters to
track any perf events based on the value written to mhpmevent csr.
Add read/write functionality for these csrs.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-7-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the privilege specification v1.11, mcountinhibit allows to start/stop
a pmu counter selectively.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-6-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V privilege specification provides flexibility to implement
any number of counters from 29 programmable counters. However, the QEMU
implements all the counters.
Make it configurable through pmu config parameter which now will indicate
how many programmable counters should be implemented by the cpu.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The PMU counters are supported via cpu config "Counters" which doesn't
indicate the correct purpose of those counters.
Rename the config property to pmu to indicate that these counters
are performance monitoring counters. This aligns with cpu options for
ARM architecture as well.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the predicate function for PMU related CSRs only works if
virtualization is enabled. It also does not check mcounteren bits before
before cycle/minstret/hpmcounterx access.
Support supervisor mode access in the predicate function as well.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The predicate function calculates the counter index incorrectly for
hpmcounterx. Fix the counter index to reflect correct CSR number.
Fixes: e39a8320b0 ("target/riscv: Support the Virtual Instruction fault")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For a TOR entry to match, the stard address must be lower than the end
address. Normally this is always the case, but correct code might still
run into the following scenario:
Initial state:
pmpaddr3 = 0x2000 pmp3cfg = OFF
pmpaddr4 = 0x3000 pmp4cfg = TOR
Execution:
1. write 0x40ff to pmpaddr3
2. write 0x32ff to pmpaddr4
3. set pmp3cfg to NAPOT with a read-modify-write on pmpcfg0
4. set pmp4cfg to NAPOT with a read-modify-write on pmpcfg1
When (2) is emulated, a call to pmp_update_rule() creates a negative
range for pmp4 as pmp4cfg is still set to TOR. And when (3) is emulated,
a call to tlb_flush() is performed, causing pmp_get_tlb_size() to return
a very creatively large TLB size for pmp4. This, in turn, may result in
accesses to non-existent/unitialized memory regions and a fault, so that
(4) ends up never being executed.
This is in m-mode with MPRV unset, meaning that unlocked PMP entries
should have no effect. Therefore such a behavior based on PMP content
is very unexpected.
Make sure no negative PMP range can be created, whether explicitly by
the emulated code or implicitly like the above.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <3oq0sqs1-67o0-145-5n1s-453o118804q@syhkavp.arg>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The set of instructions that require decode_save_opc for
unwinding is really fairly small -- only insns that can
raise ILLEGAL_INSN at runtime. This includes CSR, anything
that uses a *new* fp rounding mode, and many privileged insns.
Since unwind info is stored as the difference from the
previous insn, storing a 0 for most insns minimizes the
size of the unwind info.
Booting a debian kernel image to the missing rootfs panic yields
- gen code size 22226819/1026886656
+ gen code size 21601907/1026886656
on 41k TranslationBlocks, a savings of 610kB or a bit less than 3%.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function doesn't set mtval, it sets badaddr. Move the set
of badaddr directly into gen_exception_inst_addr_mis and use
generate_exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While we set env->bins when unwinding for ILLEGAL_INST,
from e.g. csrrw, we weren't setting it for immediately
illegal instructions.
Add a testcase for mtval via both exception paths.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1060
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 57c108b864 introduced gen_set_gpri(), which already contains
a check for if the destination register is 'zero'. The check in auipc
and lui are then redundant. This patch removes those checks.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220610165517.47517-1-victor.colombo@eldorado.org.br>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Semihosting is not enabled for nios2-linux-user.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg nios2_semi_return_* to gdb_syscall_complete_cb.
Use the 32-bit version normally, and the 64-bit version
for HOSTED_LSEEK.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't implement it with _WIN32 hosts, and the syscalls
are missing from the gdb remote file i/o interface.
Since we can't implement them universally, drop them.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From the Unified Hosting Interface, MD01069 Reference Manual,
version 1.1.6, 06 July 2015.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Within do_interrupt, we hold the iothread lock, which
is required for Chardev access for the console, and for
the round trip for use_gdb_syscalls().
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we had a call to do_m68k_semihosting in linux-user, it
wasn't actually reachable. We don't include DISAS_INSN(halt)
as an instruction unless system mode.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg m68k_semi_return_* to gdb_syscall_complete_cb.
Use the 32-bit version normally, and the 64-bit version
for HOSTED_LSEEK.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change 'ret' to uint64_t. This resolves a FIXME in the
m68k and nios2 semihosting that we've lost data.
Change 'err' to int. There is nothing target-specific
about the width of the errno value.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the ARM and RISCV specific helpers into
their own header file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have two copies of these structures, and require them
in semihosting/ going forward.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There were 3 copies of these flags. Place them in the
file with gdb_do_syscall, with which they belong.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform the cleanup in the FIXME comment in common_semi_gdb_syscall.
Do not modify guest registers until the syscall is complete,
which in the gdbstub case is asynchronous.
In the synchronous non-gdbstub case, use common_semi_set_ret
to set the result. Merge set_swi_errno into common_semi_cb.
Rely on the latter for combined return value / errno setting.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have a subdirectory for semihosting; move this file out of exec.
Rename to emphasize the contents are a replacement for the functions
in linux-user/bsd-user uaccess.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In machvirt_init we create a cpu but do not fully initialize it.
Thus the propagation of V7VE to LPAE has not been done, and we
compute the wrong value for some v7 cpus, e.g. cortex-a15.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1078
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Message-id: 20220619001541.131672-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the code from hw/arm/virt.c that is supposed
to handle v7 into the one function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Message-id: 20220619001541.131672-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need these functions in translate-sme.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need SVL separate from VL for RDSVL et al, as well as
ZA storage loads and stores, which do not require PSTATE.SM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When Streaming SVE mode is enabled, the size is taken from
SMCR_ELx instead of ZCR_ELx. The format is shared, but the
set of vector lengths is not. Further, Streaming SVE does
not require any particular length to be supported.
Adjust sve_vqm1_for_el to pass the current value of PSTATE.SM
to the new function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mirror the properties for SVE. The main difference is
that any arbitrary set of powers of 2 may be supported,
and not the stricter constraints that apply to SVE.
Include a property to control FEAT_SME_FA64, as failing
to restrict the runtime to the proper subset of insns
could be a major point for bugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220620175235.60881-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions are not used outside cpu64.c,
so make them static.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the aa32-only inline fallbacks,
and just use a couple of ifdefs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from cpu_arm_{get,set}_sve_default_vec_len,
and take the pointer to default_vq from opaque.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from cpu_arm_{get,set}_sve_vq, and take the
ARMVQMap as the opaque parameter.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pull the three sve_vq_* values into a structure.
This will be reused for SME.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Keep all of the error messages together. This does mean that
when setting many sve length properties we'll only generate
one error, but we only really need one.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These two instructions are aliases of MSR (immediate).
Use the two helpers to properly implement svcr_write.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Place this late in the resettable section of the structure,
to keep the most common element offsets from being > 64k.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-10-richard.henderson@linaro.org
[PMM: expanded comment on zarray[] format]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are required to determine if various insns
are allowed to issue.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the streaming mode identification register, and the
two streaming priority registers. For QEMU, they are all RES0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These cpregs control the streaming vector length and whether the
full a64 instruction set is allowed while in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This cpreg is used to access two new bits of PSTATE
that are not visible via any other mechanism.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will be used for controlling access to SME cpregs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will be used for raising various traps for SME.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is CheckSMEAccess, which is the basis for a set of
related tests for various SME cpregs and instructions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This register is part of SME, but isn't closely related to the
rest of the extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some features such as running in EL3 or running M profile code are
incompatible with virtualization as QEMU implements it today. To prevent
users from picking invalid configurations on other virt solutions like
Hvf, let's run the same checks there too.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1073
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620192242.70573-2-agraf@csgraf.de
[PMM: Allow qtest accelerator too; tweak comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPUClass::memory_rw_debug() holds a callback for GDB memory access.
If not provided, cpu_memory_rw_debug() is used by the GDB stub.
Drop avr_cpu_memory_rw_debug() which does nothing special.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220322095004.70682-1-bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'resume_as_sreset' attribute of a cpu is set when a thread is
entering a stop state on ppc books. It causes the thread to be
re-routed to vector 0x100 when woken up by an exception. So it must be
cleared on reset or a thread might be re-routed unexpectedly after a
reset, when it was not in a stop state and/or when the appropriate
exception handler isn't set up yet.
Using skiboot, it can be tested by resetting the system when it is
quiet and most threads are idle and in stop state.
After the reset occurs, skiboot elects a primary thread and all the
others wait in secondary_wait. The primary thread does all the system
initialization from main_cpu_entry() and at some point, the
decrementer interrupt starts ticking. The exception vector for the
decrementer interrupt is in place, so that shouldn't be a
problem. However, if that primary thread was in stop state prior to
the reset, and because the resume_as_sreset parameters is still set,
it is re-routed to exception vector 0x100. Which, at that time, is
still defined as the entry point for BML. So that primary thread
restarts as new and ends up being treated like any other secondary
thread. All threads are now waiting in secondary_wait.
It results in a full system hang with no message on the console, as
the uart hasn't been init'ed yet. It's actually not obvious to realise
what's happening if not tracing reset (-d cpu_reset). The fix is
simply to clear the 'resume_as_sreset' attribute on reset.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220617095222.612212-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit c29018cc73 added an env->fpscr OR operation using a ternary
that checks if 'error' is not zero:
env->fpscr |= error ? FP_FEX : 0;
However, in the current body of do_fpscr_check_status(), 'error' is
granted to be always non-zero at that point. The result is that Coverity
is less than pleased:
Control flow issues (DEADCODE)
Execution cannot reach the expression "0ULL" inside this statement:
"env->fpscr |= (error ? 1073...".
Remove the ternary and always make env->fpscr |= FP_FEX.
Cc: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Cc: Richard Henderson <richard.henderson@linaro.org>
Fixes: Coverity CID 1489442
Fixes: c29018cc73 ("target/ppc: Implemented xvf*ger*")
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20220602191048.137511-1-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Coverity is not thrilled about the multiply operations being done in
ger_rank8() and ger_rank2(), giving an error like the following:
Integer handling issues (OVERFLOW_BEFORE_WIDEN)
Potentially overflowing expression "sextract32(a, 4 * i, 4) *
sextract32(b, 4 * i, 4)" with type "int" (32 bits, signed) is evaluated
using 32-bit arithmetic, and then used in a context that expects an
expression of type "int64_t" (64 bits, signed).
Fix both instances where this occur by adding an int64_t cast in the
first operand, forcing the result to be 64 bit.
Fixes: Coverity CID 1489444, 1489443
Fixes: 345531533f ("target/ppc: Implemented xvi*ger* instructions")
Cc: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20220602141449.118173-1-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The extract64 arguments are not endian dependent as they are only used
for bitwise operations. The current behavior in little-endian hosts is
correct; since the indexes in VRB are in PowerISA-ordering, we should
always invert the value before calling extract64. Also, using the VsrD
macro, we can have a single EXTRACT_BIT definition for big and
little-endian with the correct behavior.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220601125355.1266165-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
vmodsw: Vector Modulo Signed Word
vmoduw: Vector Modulo Unsigned Word
vmodsd: Vector Modulo Signed Doubleword
vmodud: Vector Modulo Unsigned Doubleword
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-8-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
vdivesw: Vector Divide Extended Signed Word
vdiveuw: Vector Divide Extended Unsigned Word
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-4-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
vdivsw: Vector Divide Signed Word
vdivuw: Vector Divide Unsigned Word
vdivsd: Vector Divide Signed Doubleword
vdivud: Vector Divide Unsigned Doubleword
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Switch statements for the code segments that handle nanoMIPS
instruction pools P.LL, P.SC, P.SHIFT, P.LS.S1, P.LS.E0, PP.LSXS
do not have proper default case, resulting in not generating
reserved instruction exception for certain illegal opcodes.
Fix this by adding default cases for these switch statements that
trigger reserved instruction exception.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-7-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
nanoMIPS ISA does not support unaligned memory access. Adjust
DisasContext's default_tcg_memop_mask to reflect this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-6-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
If both rs and rt are the same register, the nanoMIPS instruction
BNEC[32] rs, rt, address is equivalent to NOP (branch is not taken and
there is no delay slot). This commit provides such behavior. Without
this commit, this scenario results in an incorrect behavior.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-5-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There are currently two problems related to the emulation of the
instruction BPOSGE32C.
The nanoMIPS instruction BPOSGE32C belongs to DSP R3 instructions
(actually, as of now, it is the only instruction of DSP R3). The
presence of DSP R3 instructions in QEMU is indicated by the flag
MIPS_HFLAG_DSP_R3 (0x20000000). This flag is currently being properly
set in CPUMIPSState's hflags (for example, for I7200 nanoMIPS CPU).
However, it is not propagated to DisasContext's hflags, since the flag
MIPS_HFLAG_DSP_R3 is not set in MIPS_HFLAG_TMASK (while similar flags
MIPS_HFLAG_DSP_R2 and MIPS_HFLAG_DSP are set in this mask, and there
is no problem in functioning check_dsp_r2(), check_dsp()). This means
the function check_dsp_r3() currently does not work properly, and the
emulation of BPOSGE32C can not work properly as well.
Change MIPS_HFLAG_TMASK from 0x1F5807FF to 0x3F5807FF (logical OR
with 0x20000000) to fix this.
Additionally, check_cp1_enabled() is currently incorrectly called
while emulating BPOSGE32C. BPOSGE32C is in the same pool (P.BR1) as
FPU branch instruction BC1EQZC and BC1NEZC, but it not a part of FPU
(CP1) instructions, and check_cp1_enabled() should not be involved
while emulating BPOSGE32C.
Rearrange invocations of check_cp1_enabled() within P.BR1 pool
handling to affect only BC1EQZC and BC1NEZC emulation, and not
BPOSGE32C emulation.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-4-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field rs in the instruction EXTRV_S.H rt, ac, rs is specified in
nanoMIPS documentation as opcode[20..16]. It is, however, erroneously
considered as opcode[25..21] in the current QEMU implementation. In
function gen_pool32axf_2_nanomips_insn(), the variable v0_t corresponds
to rt/opcode[25..21], and v1_t corresponds to rs/opcode[20..16]), and
v0_t is by mistake passed to the helper gen_helper_extr_s_h().
Use v1_t rather than v0_t in the invocation of gen_helper_extr_s_h()
to fix this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-3-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field ac in nanoMIPS instruction MTHLIP rs, ac is specified in
nanoMIPS documentation as opcode[15..14] (2 bits). However, in the
current QEMU code, the corresponding argument passed to the helper
gen_helper_mthlip() has the value of opcode[15..11] (5 bits). Right
shift the value of this argument by three bits to fix this.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-2-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix the FTRUNC_S and FTRUNC_U trans helper problem.
Fixes: 5c5b64000c ("target/mips: Convert MSA 2RF instruction format to decodetree")
Signed-off-by: nihui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503144241.289239-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch fix the issue that helper_msa_st_b() write high 64bit
data to where the low 64bit resides, leaving high 64bit undefined.
Fixes: 68ad9260e0 ("target/mips: Use 8-byte memory ops for msa load/store")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504023319.12923-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Only for msa COPY_U/COPY_S with wd zero, we treat it as NOP.
Move this special rule into COPY_U and COPY_S trans function.
Fixes: 97fe675519 ("target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-4-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix issue that condition of check_msa_enabled(ctx) is reversed
that causes segfault when msa elm_fn op encountered.
Fixes: 2f2745c81a ("target/mips: Convert MSA COPY_U opcode to decodetree")
Fixes: 97fe675519 ("target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-3-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Actually look into dfe structure data so that df_extract_val() and
df_extract_df() can return immediate and datafield other than BYTE.
Fixes: 4701d23aef ("target/mips: Convert MSA BIT instruction format to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-2-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix the SAT_S and SAT_U trans helper confusion.
Fixes: 4701d23aef ("target/mips: Convert MSA BIT instruction format to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
bit 31 (M) of WatchHiN register is a read-only register indicating
whether the next WatchHi register is present. It must not be reset
during user writes to the register.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: David Daney <david.daney@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20220511212953.74738-1-philmd@fungible.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since DDI0487F.a, the RW bit is RAO/WI. When specifically
targeting such a cpu, e.g. cortex-a76, it is legitimate to
ignore the bit within the secure monitor.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1062
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609214657.1217913-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because reset always initializes the AA64 version, SCR_EL3,
test the mode of EL3 instead of the type of the cpreg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609214657.1217913-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were using arm_is_secure and is_a64, which are
tests against the current EL, as opposed to
arm_el_is_aa64 and arm_is_secure_below_el3, which
can be applied to a different EL than current.
Consolidate the two tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is no longer used outside debug_helper.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle the debug vs current el exception test in one place.
Leave EXCP_BKPT alone, since that treats debug < current differently.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is no longer used. At the same time, remove
DisasContext.secure_routed_to_el3, as it in turn becomes unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the helper we can use exception_target_el at runtime,
instead of default_exception_el at translate time.
While we're at it, remove the DisasContext parameter from
gen_exception, as it is no longer used.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a common helper function for gen_exception_el
and gen_exception_insn_el_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a new wrapper function that passes the default
exception target to gen_exception_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is not required by any other translation file.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We no longer need this value during translation,
as it is now handled within the helpers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the computation from gen_swstep_exception into a helper.
This fixes a bug when:
- MDSCR_EL1.KDE == 1 to enable debug exceptions within EL_D itself
- we singlestep an ERET from EL_D to some lower EL
Previously we were computing 'same el' based on the EL which
executed the ERET instruction, whereas it ought to be computed
based on the EL to which ERET returned. This happens naturally
with the new helper, which runs after EL has been changed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a new wrapper function that passes the default
exception target to gen_exception_insn_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function below gen_exception_insn that takes
the target_el as a TCGv_i32, replacing gen_exception_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename to helper_exception_with_syndrome_el, to emphasize
that the target el is a parameter.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function now now only used in debug_helper.c, so there is
no reason to have a declaration in a header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the accessor rather than the raw structure member.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move arm_generate_debug_exceptions and its two subroutines,
{aa32,aa64}_generate_debug_exceptions into debug_helper.c,
and the one interface declaration to internals.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the function to debug_helper.c, and the
declaration to internals.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the function to op_helper.c, near raise_exception.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With ARMv8, this field is always RES0.
With ARMv7, targeting EL2 and TA=0, it is always 0xA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When running a 32-bit guest, with a e64 vmv.v.x and vl_eq_vlmax set to
true the `tcg_debug_assert(vece <= MO_32)` will be triggered inside
tcg_gen_gvec_dup_i32().
This patch checks that condition and instead uses tcg_gen_gvec_dup_i64()
is required.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1028
Suggested-by: Robert Bu <robert.bu@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220608234701.369536-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are currently two types of RISC-V CPUs:
- Generic CPUs (base or any) that allow complete custimisation
- "Named" CPUs that match existing hardware
Users can use the base CPUs to custimise the extensions that they want, for
example -cpu rv64,v=true.
We originally exposed these as part of the named CPUs as well, but that was
by accident.
Exposing the CPU properties to named CPUs means that we accidently
enable extensions that don't exist on the CPUs by default. For example
the SiFive E CPU currently support the zba extension, which is a bug.
This patch instead only exposes the CPU extensions to the generic CPUs.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220608061437.314434-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, tail agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of tail policies, QEMU should be able to simulate the tail
agnostic behavior as "set tail elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between tail policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This commit adds option 'rvv_ta_all_1s' is added to enable the
behavior, it is default as disabled.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-16@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
